lkml.org 
[lkml]   [2008]   [Feb]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 02/10] IDE: Coding Style fixes to drivers/ide/legacy/umc8672.c
File is now error free.
Compile tested.

Signed-off-by: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>
---
drivers/ide/legacy/umc8672.c | 53 ++++++++++++++++++++---------------------
1 files changed, 26 insertions(+), 27 deletions(-)

diff --git a/drivers/ide/legacy/umc8672.c b/drivers/ide/legacy/umc8672.c
index 43ee632..7783b59 100644
--- a/drivers/ide/legacy/umc8672.c
+++ b/drivers/ide/legacy/umc8672.c
@@ -19,7 +19,7 @@
*/

/*
- * VLB Controller Support from
+ * VLB Controller Support from
* Wolfram Podien
* Rohoefe 3
* D28832 Achim
@@ -32,7 +32,7 @@
* #define UMC_DRIVE0 11
* in the beginning of the driver, which sets the speed of drive 0 to 11 (there
* are some lines present). 0 - 11 are allowed speed values. These values are
- * the results from the DOS speed test program supplied from UMC. 11 is the
+ * the results from the DOS speed test program supplied from UMC. 11 is the
* highest speed (about PIO mode 3)
*/
#define REALLY_SLOW_IO /* some systems can safely undef this */
@@ -60,46 +60,45 @@
#define UMC_DRIVE3 1 /* In case of crash reduce speed */

static u8 current_speeds[4] = {UMC_DRIVE0, UMC_DRIVE1, UMC_DRIVE2, UMC_DRIVE3};
-static const u8 pio_to_umc [5] = {0,3,7,10,11}; /* rough guesses */
+static const u8 pio_to_umc [5] = {0, 3, 7, 10, 11}; /* rough guesses */

/* 0 1 2 3 4 5 6 7 8 9 10 11 */
static const u8 speedtab [3][12] = {
{0xf, 0xb, 0x2, 0x2, 0x2, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1 },
{0x3, 0x2, 0x2, 0x2, 0x2, 0x2, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1 },
- {0xff,0xcb,0xc0,0x58,0x36,0x33,0x23,0x22,0x21,0x11,0x10,0x0}};
+ {0xff, 0xcb, 0xc0, 0x58, 0x36, 0x33, 0x23, 0x22, 0x21, 0x11, 0x10, 0x0} };

-static void out_umc (char port,char wert)
+static void out_umc(char port, char wert)
{
- outb_p(port,0x108);
- outb_p(wert,0x109);
+ outb_p(port, 0x108);
+ outb_p(wert, 0x109);
}

-static inline u8 in_umc (char port)
+static inline u8 in_umc(char port)
{
- outb_p(port,0x108);
+ outb_p(port, 0x108);
return inb_p(0x109);
}

-static void umc_set_speeds (u8 speeds[])
+static void umc_set_speeds(u8 speeds[])
{
int i, tmp;

- outb_p(0x5A,0x108); /* enable umc */
+ outb_p(0x5A, 0x108); /* enable umc */

- out_umc (0xd7,(speedtab[0][speeds[2]] | (speedtab[0][speeds[3]]<<4)));
- out_umc (0xd6,(speedtab[0][speeds[0]] | (speedtab[0][speeds[1]]<<4)));
+ out_umc(0xd7, (speedtab[0][speeds[2]] | (speedtab[0][speeds[3]]<<4)));
+ out_umc(0xd6, (speedtab[0][speeds[0]] | (speedtab[0][speeds[1]]<<4)));
tmp = 0;
- for (i = 3; i >= 0; i--) {
+ for (i = 3; i >= 0; i--)
tmp = (tmp << 2) | speedtab[1][speeds[i]];
+ out_umc(0xdc, tmp);
+ for (i = 0; i < 4; i++) {
+ out_umc(0xd0+i, speedtab[2][speeds[i]]);
+ out_umc(0xd8+i, speedtab[2][speeds[i]]);
}
- out_umc (0xdc,tmp);
- for (i = 0;i < 4; i++) {
- out_umc (0xd0+i,speedtab[2][speeds[i]]);
- out_umc (0xd8+i,speedtab[2][speeds[i]]);
- }
- outb_p(0xa5,0x108); /* disable umc */
+ outb_p(0xa5, 0x108); /* disable umc */

- printk ("umc8672: drive speeds [0 to 11]: %d %d %d %d\n",
+ printk("umc8672: drive speeds [0 to 11]: %d %d %d %d\n",
speeds[0], speeds[1], speeds[2], speeds[3]);
}

@@ -115,7 +114,7 @@ static void umc_set_pio_mode(ide_drive_t *drive, const u8 pio)
printk(KERN_ERR "umc8672: other interface is busy: exiting tune_umc()\n");
} else {
current_speeds[drive->name[2] - 'a'] = pio_to_umc[pio];
- umc_set_speeds (current_speeds);
+ umc_set_speeds(current_speeds);
}
spin_unlock_irqrestore(&ide_lock, flags);
}
@@ -138,16 +137,16 @@ static int __init umc8672_probe(void)
return 1;
}
local_irq_save(flags);
- outb_p(0x5A,0x108); /* enable umc */
+ outb_p(0x5A, 0x108); /* enable umc */
if (in_umc (0xd5) != 0xa0) {
local_irq_restore(flags);
printk(KERN_ERR "umc8672: not found\n");
release_region(0x108, 2);
- return 1;
+ return 1;
}
- outb_p(0xa5,0x108); /* disable umc */
+ outb_p(0xa5, 0x108); /* disable umc */

- umc_set_speeds (current_speeds);
+ umc_set_speeds(current_speeds);
local_irq_restore(flags);

memset(&hw, 0, sizeof(hw));
@@ -177,7 +176,7 @@ static int __init umc8672_probe(void)
return 0;
}

-int probe_umc8672 = 0;
+int probe_umc8672;

module_param_named(probe, probe_umc8672, bool, 0);
MODULE_PARM_DESC(probe, "probe for UMC8672 chipset");
--
1.5.4.2.316.gf7a7


\
 
 \ /
  Last update: 2008-02-23 15:09    [W:0.024 / U:0.332 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site