lkml.org 
[lkml]   [2008]   [Feb]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: New 2.6.24.2 SG_IO SCSI problems
Mark Hounschell wrote:
> Mike Christie wrote:
>> Mike Christie wrote:
>>> Mark Hounschell wrote:
>>>> I seem to have run into some sort of regression in the SG_IO
>>>> interface of 2.6.24.2. I have an application that up until 2.6.24
>>>> worked fine. The 2.6.23.16 kernel works fine.
>>>>
>>>> During reads I get these kernel messages. Writes and other functions
>>>> _seem_ OK. Actually basic
>>>> reads are working. Its with large BC reads using an io_vec list that
>>>> the problem shows up.
>>>>
>>> Are you doing SG_IO to the sg device (/dev/sg*) or to the block device
>>> (/dev/sdX)?
>> If you are doing SG_IO to the sg device, then I know of one regression
>> (well not regression exactly, but I fixed a bug but the patch got
>> partially overwritten by another patch and that caused a new bug). Both
>> bugs are fixed in 2.6.25-rc2. Could you try that out if you are doing
>> SG_IO to the sg device.
>>
>
> Yes, I'm using /dev/sg*. And yes again I'll checkout 2.6.25-rc2 ASIC.
>
> Thanks
> Mark
> -

2.6.25-rc2 does fix the problem I'm having. I don't suppose there is a patch
lying around for 2.6.24.2??

Thanks
Mark



\
 
 \ /
  Last update: 2008-02-22 22:45    [W:0.079 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site