lkml.org 
[lkml]   [2008]   [Feb]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
Subjectkernel-2.6.25-rc2, CPU C state "active state" always remain C0 unchangeable by cat 'proc/'
From
On Fedora9 Alpha with  kernel-2.6.25-rc2,
I run " watch -n 0.1 "cat /proc/acpi/processor/CPU*/power | grep 'active
state'" ", I find that the CPU C state information "active state" remain
at "C0" and it do not change any time. The same issue also exit on
2.6.24-rc2 kernel.
But with RHEL5.1 kernel-2.6.18 the CPU C state information is normal.


Every 0.1s: cat /proc/acpi/processor/CPU*/power | grep 'active state'

Thu Feb 21 09:44:33 2008

active state: C0
active state: C0
active state: C0
active state: C0
active state: C0
active state: C0
active state: C0
active state: C0

On RHEL5.1 kernel-2.6.18-53.el5
[root@localhost ~]# cat /proc/acpi/processor/CPU*/power | grep 'active state'
active state: C2
active state: C2
active state: C2
active state: C2
active state: C2
active state: C3
active state: C2
active state: C3

The hardware platform: bensley and santarosa.



\
 
 \ /
  Last update: 2008-02-21 08:05    [W:0.030 / U:0.280 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site