lkml.org 
[lkml]   [2008]   [Dec]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH] virtio: make PCI devices take a virtio_pci module ref
    Jiri Slaby wrote:
    > On 12/04/2008 01:44 PM, Mark McLoughlin wrote:
    >> Nothing takes a ref on virtio_pci, so even if you have
    >> devices in use, rmmod will attempt to unload the module.
    >
    > It unbinds the device properly as any other driver. So what's the problem here?

    Here's what we get when rmmod'ing (a zero-refcounted but
    in use) virtio_pci (I did it by a chance, cut-n-pasted
    the wrong line):

    WARNING: at drivers/base/core.c:122 device_release+0x5f/0x70()
    Device 'virtio1' does not have a release() function, it is broken and must be fixed.
    Modules linked in: ext3 jbd mbcache acpiphp dock pci_hotplug virtio_net virtio_blk virtio_pci(-) virtio_ring virtio

    Pid: 361, comm: rmmod Tainted: G S 2.6.27-i686smp #2.6.27.7
    [<c012b81f>] warn_slowpath+0x6f/0xa0
    [<c0110030>] prepare_set+0x30/0x80
    [<c012067e>] __wake_up+0x3e/0x60
    [<c01d1d25>] release_sysfs_dirent+0x45/0xb0
    ...

    >> Reported-by: Michael Tokarev <mjt@tls.msk.ru>

    It was in my original report to kvm@vger.

    Thanks!

    /mjt


    \
     
     \ /
      Last update: 2008-12-05 10:05    [W:0.028 / U:32.688 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site