lkml.org 
[lkml]   [2008]   [Dec]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subjectlarge intermittent latency spike 2.6.28 (and 2.6.27.10), bisect commit ca7e716c7833aeaeb8fedd6d004c5f5d5e14d325 -> Revert "sched_clock: prevent scd->clock from moving backwards"
Greetings,

I noticed large latency spikes in 2.6.28 (and 2.6.27.10) which would
make the system unresponsive for minutes at a time (alt+Fn switching
wouldn't even work) when the system is under load. I could trigger the
latency by running a large make -j 3. Sometimes it would trigger in a
few seconds other times it would take a few minutes.

I bisected it in 2.6.27.10 to d9a888b061f55534016d2d86a21639948312a117
-> Revert "sched_clock: prevent scd->clock from moving backwards"
(ca7e716c7833aeaeb8fedd6d004c5f5d5e14d325 in 2.6.28) and reverting it in
2.6.28 make the latency spike go away. At least, so far no spike in over
24 hours.
.config and dmesg from vanilla 2.6.28 is attached.

Here's the commit:

------------------------------------
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Sun, 14 Dec 2008 23:46:01 +0000 (-0800)
Subject: Revert "sched_clock: prevent scd->clock from moving backwards"
X-Git-Tag: v2.6.28-rc9~27
X-Git-Url:
http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Ftorvalds%2Flinux-2.6.git;a=commitdiff_plain;h=ca7e716c7833aeaeb8fedd6d004c5f5d5e14d325
Revert "sched_clock: prevent scd->clock from moving backwards"

This reverts commit 5b7dba4ff834259a5623e03a565748704a8fe449, which
caused a regression in hibernate, reported by and bisected by Fabio
Comolli.

This revert fixes

http://bugzilla.kernel.org/show_bug.cgi?id=12155
http://bugzilla.kernel.org/show_bug.cgi?id=12149

Bisected-by: Fabio Comolli <fabio.comolli@gmail.com>
Requested-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
diff --git a/kernel/sched_clock.c b/kernel/sched_clock.c
index 8178724..e8ab096 100644
--- a/kernel/sched_clock.c
+++ b/kernel/sched_clock.c
@@ -118,13 +118,13 @@ static u64 __update_sched_clock(struct
sched_clock_data *scd, u64 now)

/*
* scd->clock = clamp(scd->tick_gtod + delta,
- * max(scd->tick_gtod, scd->clock),
- * max(scd->clock, scd->tick_gtod + TICK_NSEC));
+ * max(scd->tick_gtod, scd->clock),
+ * scd->tick_gtod + TICK_NSEC);
*/

clock = scd->tick_gtod + delta;
min_clock = wrap_max(scd->tick_gtod, scd->clock);
- max_clock = wrap_max(scd->clock, scd->tick_gtod + TICK_NSEC);
+ max_clock = scd->tick_gtod + TICK_NSEC;

clock = wrap_max(clock, min_clock);
clock = wrap_min(clock, max_clock);
------------------------------------#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.28
# Mon Dec 29 01:23:53 2008
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_USER_SCHED is not set
CONFIG_CGROUP_SCHED=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
# CONFIG_CGROUP_MEM_RES_CTLR is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_PROC_PID_CPUSET=y
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_MARKERS=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_VSMP is not set
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_CPU=y
CONFIG_X86_L1_CACHE_BYTES=128
CONFIG_X86_INTERNODE_CACHE_BYTES=128
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR_64=y
# CONFIG_X86_DS is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
CONFIG_CALGARY_IOMMU=y
CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
CONFIG_AMD_IOMMU=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_NR_CPUS=64
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_MCE is not set
# CONFIG_I8K is not set
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_NUMA=y
CONFIG_K8_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=6
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y

#
# Memory hotplug is currently incompatible with Software Suspend
#
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW_64K=y
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_X86_PAT=y
CONFIG_EFI=y
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not set
CONFIG_CAN_PM_TRACE=y
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set

#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=y
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set

#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y

#
# Memory power savings
#
# CONFIG_I7300_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
CONFIG_DMAR=y
CONFIG_DMAR_GFX_WA=y
CONFIG_DMAR_FLOPPY_WA=y
# CONFIG_INTR_REMAP is not set
CONFIG_PCIEPORTBUS=y
# CONFIG_HOTPLUG_PCI_PCIE is not set
CONFIG_PCIEAER=y
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
# CONFIG_HOTPLUG_PCI_ACPI is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
CONFIG_TCP_CONG_CUBIC=y
# CONFIG_TCP_CONG_WESTWOOD is not set
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_NETFILTER_ADVANCED is not set

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_FTP=y
CONFIG_NF_CONNTRACK_IRC=y
CONFIG_NF_CONNTRACK_SIP=y
CONFIG_NF_CT_NETLINK=y
CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
CONFIG_NETFILTER_XT_TARGET_MARK=y
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
CONFIG_NETFILTER_XT_TARGET_SECMARK=y
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_MARK=y
CONFIG_NETFILTER_XT_MATCH_POLICY=y
CONFIG_NETFILTER_XT_MATCH_STATE=y
# CONFIG_IP_VS is not set

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=y
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_NF_NAT=y
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_NF_NAT_FTP=y
CONFIG_NF_NAT_IRC=y
# CONFIG_NF_NAT_TFTP is not set
# CONFIG_NF_NAT_AMANDA is not set
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
CONFIG_NF_NAT_SIP=y
CONFIG_IP_NF_MANGLE=y

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=y
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_IPV6HEADER=y
CONFIG_IP6_NF_TARGET_LOG=y
CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_TARGET_REJECT=y
CONFIG_IP6_NF_MANGLE=y
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_INGRESS is not set

#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
# CONFIG_NET_EMATCH_CMP is not set
# CONFIG_NET_EMATCH_NBYTE is not set
# CONFIG_NET_EMATCH_U32 is not set
# CONFIG_NET_EMATCH_META is not set
# CONFIG_NET_EMATCH_TEXT is not set
CONFIG_NET_CLS_ACT=y
# CONFIG_NET_ACT_POLICE is not set
# CONFIG_NET_ACT_GACT is not set
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_IPT is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_ACT_SKBEDIT is not set
CONFIG_NET_SCH_FIFO=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
# CONFIG_AX25 is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_PHONET is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
CONFIG_NL80211=y
CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_MAC80211=y

#
# Rate control algorithm selection
#
CONFIG_MAC80211_RC_PID=y
# CONFIG_MAC80211_RC_MINSTREL is not set
CONFIG_MAC80211_RC_DEFAULT_PID=y
# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
CONFIG_MAC80211_RC_DEFAULT="pid"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_ICS932S401 is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_SGI_XP is not set
# CONFIG_HP_ILO is not set
# CONFIG_SGI_GRU is not set
# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=y
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=y
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
CONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_SCH=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
CONFIG_DM_MIRROR=y
CONFIG_DM_ZERO=y
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#

#
# Enable only one of the two stacks, unless you know what you are doing
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
# CONFIG_IFB is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
# CONFIG_TYPHOON is not set
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_PCMCIA_XIRCOM is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
CONFIG_FORCEDETH=y
# CONFIG_FORCEDETH_NAPI is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
CONFIG_SKY2=y
# CONFIG_SKY2_DEBUG is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
CONFIG_TR=y
# CONFIG_IBMOL is not set
# CONFIG_3C359 is not set
# CONFIG_TMS380TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_P54_COMMON is not set
CONFIG_ATH5K=y
# CONFIG_ATH5K_DEBUG is not set
# CONFIG_ATH9K is not set
# CONFIG_IWLCORE is not set
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_IWLAGN is not set
# CONFIG_IWL3945 is not set
# CONFIG_HOSTAP is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_ZD1211RW is not set
# CONFIG_RT2X00 is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_FMVJ18X is not set
# CONFIG_PCMCIA_PCNET is not set
# CONFIG_PCMCIA_NMCLAN is not set
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_PCMCIA_XIRC2PS is not set
# CONFIG_PCMCIA_AXNET is not set
# CONFIG_PCMCIA_IBMTR is not set
# CONFIG_WAN is not set
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
# CONFIG_SKFP is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_GTCO is not set
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_WACOM is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not set
# CONFIG_STALDRV is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_INTEL is not set
# CONFIG_HW_RANDOM_AMD is not set
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_IPWIRELESS is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=y
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Graphics adapter I2C/DDC channel drivers
#
# CONFIG_I2C_VOODOO3 is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set

#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83697UG_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_REGULATOR is not set

#
# Multimedia devices
#

#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_VIDEO_MEDIA is not set

#
# Multimedia drivers
#
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
CONFIG_DRM_I915=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_VESA is not set
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_CORGI is not set
# CONFIG_BACKLIGHT_PROGEAR is not set
# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
# CONFIG_BACKLIGHT_SAHARA is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=y
CONFIG_SND_HDA_HWDEP=y
# CONFIG_SND_HDA_INPUT_BEEP is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_NVHDMI=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
# CONFIG_SND_HDA_POWER_SAVE is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_US122L is not set
CONFIG_SND_PCMCIA=y
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_DEBUG=y
CONFIG_HIDRAW=y

#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y

#
# Special HID drivers
#
CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_BRIGHT=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_DELL=y
CONFIG_HID_EZKEY=y
CONFIG_HID_GYRATION=y
CONFIG_HID_LOGITECH=y
CONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_ZEROPLUS_FF=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#

#
# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_LIBUSUAL=y

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_HP_DISK is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y

#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
# CONFIG_EDAC_MM_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set

#
# SPI RTC drivers
#

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y

#
# DMA Devices
#
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_EFI_VARS=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=y

#
# File systems
#
CONFIG_EXT2_FS=m
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=m
# CONFIG_EXT4DEV_COMPAT is not set
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y

#
# Tracers
#
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SYSPROF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_STACK_TRACER is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DIRECT_GBPAGES is not set
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_DEBUG_NX_TEST=m
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_MMIOTRACE is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
CONFIG_SECURITY_FILE_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_SMACK is not set
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set

#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set

#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y





[ 0.000000] BIOS EBDA/lowmem at: 0009e000/0009e000
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28 (jayson@atlas) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #1 SMP Mon Dec 29 01:24:58 CST 2008
[ 0.000000] Command line: ro root=/dev/Group081209/root apm=off noresume
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e400 (usable)
[ 0.000000] BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
[ 0.000000] BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.5 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
[ 0.000000] last_pfn = 0x7fee0 max_arch_pfn = 0x3ffffffff
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] init_memory_mapping: 0000000000000000-000000007fee0000
[ 0.000000] 0000000000 - 007fe00000 page 2M
[ 0.000000] 007fe00000 - 007fee0000 page 4k
[ 0.000000] kernel direct mapping tables up to 7fee0000 @ 10000-14000
[ 0.000000] last_map_addr: 7fee0000 end: 7fee0000
[ 0.000000] RAMDISK: 37bf3000 - 37fefc2a
[ 0.000000] ACPI: RSDP 000F78B0, 0014 (r0 IntelR)
[ 0.000000] ACPI: RSDT 7FEE3000, 0034 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 7FEE3080, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 7FEE3100, 4EC3 (r1 INTELR AWRDACPI 1000 MSFT 3000000)
[ 0.000000] ACPI: FACS 7FEE0000, 0040
[ 0.000000] ACPI: MCFG 7FEE80C0, 003C (r1 IntelR AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: APIC 7FEE8000, 0084 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: SSDT 7FEE8760, 0380 (r1 PmRef CpuPm 3000 INTL 20041203)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007fee0000
[ 0.000000] Bootmem setup node 0 0000000000000000-000000007fee0000
[ 0.000000] NODE_DATA [0000000000012000 - 0000000000016fff]
[ 0.000000] bootmap [0000000000017000 - 0000000000026fdf] pages 10
[ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 007fee0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 0000b212ec] TEXT DATA BSS ==> [0000200000 - 0000b212ec]
[ 0.000000] #3 [0037bf3000 - 0037fefc2a] RAMDISK ==> [0037bf3000 - 0037fefc2a]
[ 0.000000] #4 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 - 0000100000]
[ 0.000000] #5 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] found SMP MP-table at [ffff8800000f3930] 000f3930
[ 0.000000] [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x0007fee0
[ 0.000000] On node 0 totalpages: 523886
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 2442 pages reserved
[ 0.000000] DMA zone: 1484 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7109 pages used for memmap
[ 0.000000] DMA32 zone: 512795 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000)
[ 0.000000] PERCPU: Allocating 57344 bytes of per cpu data
[ 0.000000] per cpu data for cpu0 on node0 at 0000000001010000
[ 0.000000] per cpu data for cpu1 on node0 at 000000000101e000
[ 0.000000] per cpu data for cpu2 on node0 at 000000000102c000
[ 0.000000] per cpu data for cpu3 on node0 at 000000000103a000
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 514279
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: ro root=/dev/Group081209/root apm=off noresume
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] TSC: PIT calibration matches PMTIMER. 1 loops
[ 0.000000] Detected 3399.980 MHz processor.
[ 0.000999] Console: colour VGA+ 80x25
[ 0.000999] console [tty0] enabled
[ 0.000999] Checking aperture...
[ 0.000999] No AGP bridge found
[ 0.000999] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000999] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000999] Memory: 2052988k/2096000k available (4557k kernel code, 456k absent, 42556k reserved, 2838k data, 524k init)
[ 0.000999] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.001007] Calibrating delay loop (skipped), value calculated using timer frequency.. 6799.96 BogoMIPS (lpj=3399980)
[ 0.001542] Security Framework initialized
[ 0.001801] SELinux: Initializing.
[ 0.002007] SELinux: Starting in permissive mode
[ 0.002143] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.003370] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.004024] Mount-cache hash table entries: 256
[ 0.004390] Initializing cgroup subsys ns
[ 0.004647] Initializing cgroup subsys cpuacct
[ 0.004915] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.005002] CPU: L2 cache: 4096K
[ 0.005254] CPU 0/0x0 -> Node 0
[ 0.005506] CPU: Physical Processor ID: 0
[ 0.005761] CPU: Processor Core ID: 0
[ 0.006001] using mwait in idle threads.
[ 0.006268] ACPI: Core revision 20080926
[ 0.012036] Setting APIC routing to flat
[ 0.013354] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.023621] CPU0: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz stepping 0b
[ 0.023996] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.000999] Initializing CPU#1
[ 0.000999] Calibrating delay using timer specific routine.. 6798.89 BogoMIPS (lpj=3399445)
[ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000999] CPU: L2 cache: 4096K
[ 0.000999] CPU 1/0x1 -> Node 0
[ 0.000999] CPU: Physical Processor ID: 0
[ 0.000999] CPU: Processor Core ID: 1
[ 0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.094858] CPU1: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz stepping 0b
[ 0.095285] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.096007] Brought up 2 CPUs
[ 0.096987] Total of 2 processors activated (13598.85 BogoMIPS).
[ 0.097311] khelper used greatest stack depth: 6000 bytes left
[ 0.097311] net_namespace: 1344 bytes
[ 0.098060] Time: 7:36:47 Date: 12/29/08
[ 0.098282] NET: Registered protocol family 16
[ 0.098547] ACPI: bus type pci registered
[ 0.099014] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.099275] PCI: MCFG area at e0000000 reserved in E820
[ 0.105458] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.105717] PCI: Using configuration type 1 for base access
[ 0.109359] ACPI: EC: Look up EC in DSDT
[ 0.113763] ACPI: Interpreter enabled
[ 0.113984] ACPI: (supports S0 S1 S4 S5)
[ 0.114362] ACPI: Using IOAPIC for interrupt routing
[ 0.117986] ACPI: No dock devices found.
[ 0.118245] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.118520] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.118520] pci 0000:00:01.0: PME# disabled
[ 0.119029] pci 0000:00:1a.0: reg 20 io port: [0xff00-0xff1f]
[ 0.119072] pci 0000:00:1a.1: reg 20 io port: [0xfe00-0xfe1f]
[ 0.119114] pci 0000:00:1a.2: reg 20 io port: [0xfd00-0xfd1f]
[ 0.119151] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfdfff000-0xfdfff3ff]
[ 0.119179] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.119443] pci 0000:00:1a.7: PME# disabled
[ 0.119721] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfdff4000-0xfdff7fff]
[ 0.119740] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.119984] pci 0000:00:1b.0: PME# disabled
[ 0.120267] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.120530] pci 0000:00:1c.0: PME# disabled
[ 0.120815] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.120983] pci 0000:00:1c.1: PME# disabled
[ 0.121268] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.121532] pci 0000:00:1c.2: PME# disabled
[ 0.122019] pci 0000:00:1d.0: reg 20 io port: [0xfc00-0xfc1f]
[ 0.122062] pci 0000:00:1d.1: reg 20 io port: [0xfb00-0xfb1f]
[ 0.122105] pci 0000:00:1d.2: reg 20 io port: [0xfa00-0xfa1f]
[ 0.122141] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfdffe000-0xfdffe3ff]
[ 0.122168] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.122432] pci 0000:00:1d.7: PME# disabled
[ 0.122768] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.122771] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 0.122983] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.123282] pci 0000:00:1f.2: reg 10 io port: [0xf900-0xf907]
[ 0.123286] pci 0000:00:1f.2: reg 14 io port: [0xf800-0xf803]
[ 0.123289] pci 0000:00:1f.2: reg 18 io port: [0xf700-0xf707]
[ 0.123293] pci 0000:00:1f.2: reg 1c io port: [0xf600-0xf603]
[ 0.123297] pci 0000:00:1f.2: reg 20 io port: [0xf500-0xf51f]
[ 0.123300] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfdffd000-0xfdffd7ff]
[ 0.123310] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.123570] pci 0000:00:1f.2: PME# disabled
[ 0.123999] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfdffc000-0xfdffc0ff]
[ 0.124008] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]
[ 0.124036] pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
[ 0.124041] pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.124047] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff]
[ 0.124050] pci 0000:01:00.0: reg 24 io port: [0x9f00-0x9f7f]
[ 0.124053] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.124082] pci 0000:00:01.0: bridge io port: [0x9000-0x9fff]
[ 0.124084] pci 0000:00:01.0: bridge 32bit mmio: [0xf8000000-0xfbffffff]
[ 0.124087] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.124113] pci 0000:00:1c.0: bridge io port: [0xd000-0xdfff]
[ 0.124116] pci 0000:00:1c.0: bridge 32bit mmio: [0xfdc00000-0xfdcfffff]
[ 0.124119] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfd900000-0xfd9fffff]
[ 0.124164] pci 0000:03:00.0: reg 10 io port: [0xcf00-0xcf07]
[ 0.124171] pci 0000:03:00.0: reg 14 io port: [0xce00-0xce03]
[ 0.124178] pci 0000:03:00.0: reg 18 io port: [0xcd00-0xcd07]
[ 0.124186] pci 0000:03:00.0: reg 1c io port: [0xcc00-0xcc03]
[ 0.124193] pci 0000:03:00.0: reg 20 io port: [0xcb00-0xcb0f]
[ 0.124206] pci 0000:03:00.0: reg 30 32bit mmio: [0x000000-0x00ffff]
[ 0.124251] pci 0000:00:1c.1: bridge io port: [0xc000-0xcfff]
[ 0.124253] pci 0000:00:1c.1: bridge 32bit mmio: [0xfd800000-0xfd8fffff]
[ 0.124257] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xfd700000-0xfd7fffff]
[ 0.124302] pci 0000:04:00.0: reg 10 64bit mmio: [0xfdefc000-0xfdefffff]
[ 0.124309] pci 0000:04:00.0: reg 18 io port: [0xae00-0xaeff]
[ 0.124329] pci 0000:04:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.124338] pci 0000:04:00.0: supports D1 D2
[ 0.124339] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.124607] pci 0000:04:00.0: PME# disabled
[ 0.125009] pci 0000:00:1c.2: bridge io port: [0xa000-0xafff]
[ 0.125012] pci 0000:00:1c.2: bridge 32bit mmio: [0xfde00000-0xfdefffff]
[ 0.125016] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xfdd00000-0xfddfffff]
[ 0.125043] pci 0000:05:03.0: reg 10 io port: [0xbf00-0xbf7f]
[ 0.125047] pci 0000:05:03.0: reg 14 32bit mmio: [0xfdbff000-0xfdbff07f]
[ 0.125066] pci 0000:05:03.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.125073] pci 0000:05:03.0: supports D1 D2
[ 0.125074] pci 0000:05:03.0: PME# supported from D1 D2 D3hot
[ 0.125337] pci 0000:05:03.0: PME# disabled
[ 0.125621] pci 0000:00:1e.0: transparent bridge
[ 0.125879] pci 0000:00:1e.0: bridge io port: [0xb000-0xbfff]
[ 0.125881] pci 0000:00:1e.0: bridge 32bit mmio: [0xfdb00000-0xfdbfffff]
[ 0.125885] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xfda00000-0xfdafffff]
[ 0.125902] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.126105] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.126178] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 0.126251] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[ 0.126326] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.134414] ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 7 9 10 11 12)
[ 0.135413] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.136052] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11 12)
[ 0.136676] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.137292] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.138055] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *7 9 10 11 12)
[ 0.138678] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 *4 5 7 9 10 11 12)
[ 0.139438] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.140016] SCSI subsystem initialized
[ 0.140242] libata version 3.00 loaded.
[ 0.140242] usbcore: registered new interface driver usbfs
[ 0.140249] usbcore: registered new interface driver hub
[ 0.140988] usbcore: registered new device driver usb
[ 0.141240] PCI: Using ACPI for IRQ routing
[ 0.148997] cfg80211: Using static regulatory domain info
[ 0.149253] cfg80211: Regulatory domain: US
[ 0.149508] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 0.149978] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 0.150243] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.150509] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.150775] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.150977] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.151977] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 0.152244] cfg80211: Calling CRDA for country: US
[ 0.152504] NetLabel: Initializing
[ 0.152504] NetLabel: domain hash size = 128
[ 0.152977] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.153242] NetLabel: unlabeled traffic allowed by default
[ 0.153582] hpet clockevent registered
[ 0.153584] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.153981] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.154382] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.158996] pnp: PnP ACPI init
[ 0.159255] ACPI: bus type pnp registered
[ 0.161126] pnp: PnP ACPI: found 10 devices
[ 0.161380] ACPI: ACPI bus type pnp unregistered
[ 0.161641] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.161905] system 00:01: ioport range 0x290-0x30f has been reserved
[ 0.162177] system 00:01: ioport range 0x880-0x88f has been reserved
[ 0.162444] system 00:06: ioport range 0x400-0x4bf could not be reserved
[ 0.162711] system 00:08: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.162980] system 00:09: iomem range 0xf0000-0xfffff could not be reserved
[ 0.163249] system 00:09: iomem range 0x7ff00000-0x7fffffff has been reserved
[ 0.163516] system 00:09: iomem range 0x7fee0000-0x7fefffff could not be reserved
[ 0.163994] system 00:09: iomem range 0x0-0x9ffff could not be reserved
[ 0.164261] system 00:09: iomem range 0x100000-0x7fedffff could not be reserved
[ 0.164738] system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.165006] system 00:09: iomem range 0xfed14000-0xfed1dfff has been reserved
[ 0.165274] system 00:09: iomem range 0xfed20000-0xfed9ffff has been reserved
[ 0.165541] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.165808] system 00:09: iomem range 0xffb00000-0xffb7ffff has been reserved
[ 0.166077] system 00:09: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.166345] system 00:09: iomem range 0xe0000-0xeffff has been reserved
[ 0.171443] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.171706] pci 0000:00:01.0: IO window: 0x9000-0x9fff
[ 0.171966] pci 0000:00:01.0: MEM window: 0xf8000000-0xfbffffff
[ 0.172231] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.172711] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.172972] pci 0000:00:1c.0: IO window: 0xd000-0xdfff
[ 0.173236] pci 0000:00:1c.0: MEM window: 0xfdc00000-0xfdcfffff
[ 0.173499] pci 0000:00:1c.0: PREFETCH window: 0x000000fd900000-0x000000fd9fffff
[ 0.173978] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.174243] pci 0000:00:1c.1: IO window: 0xc000-0xcfff
[ 0.174504] pci 0000:00:1c.1: MEM window: 0xfd800000-0xfd8fffff
[ 0.174768] pci 0000:00:1c.1: PREFETCH window: 0x000000fd700000-0x000000fd7fffff
[ 0.175251] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
[ 0.175513] pci 0000:00:1c.2: IO window: 0xa000-0xafff
[ 0.175775] pci 0000:00:1c.2: MEM window: 0xfde00000-0xfdefffff
[ 0.176040] pci 0000:00:1c.2: PREFETCH window: 0x000000fdd00000-0x000000fddfffff
[ 0.176520] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 0.176783] pci 0000:00:1e.0: IO window: 0xb000-0xbfff
[ 0.177046] pci 0000:00:1e.0: MEM window: 0xfdb00000-0xfdbfffff
[ 0.177310] pci 0000:00:1e.0: PREFETCH window: 0x000000fda00000-0x000000fdafffff
[ 0.177793] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.178061] pci 0000:00:01.0: setting latency timer to 64
[ 0.178065] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.178332] pci 0000:00:1c.0: setting latency timer to 64
[ 0.178337] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.178602] pci 0000:00:1c.1: setting latency timer to 64
[ 0.178606] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.178873] pci 0000:00:1c.2: setting latency timer to 64
[ 0.178877] pci 0000:00:1e.0: setting latency timer to 64
[ 0.178879] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.179138] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
[ 0.179400] bus: 01 index 0 io port: [0x9000-0x9fff]
[ 0.179658] bus: 01 index 1 mmio: [0xf8000000-0xfbffffff]
[ 0.179917] bus: 01 index 2 mmio: [0xd0000000-0xdfffffff]
[ 0.180178] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.180433] bus: 02 index 0 io port: [0xd000-0xdfff]
[ 0.180690] bus: 02 index 1 mmio: [0xfdc00000-0xfdcfffff]
[ 0.180950] bus: 02 index 2 mmio: [0xfd900000-0xfd9fffff]
[ 0.181211] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.181466] bus: 03 index 0 io port: [0xc000-0xcfff]
[ 0.181723] bus: 03 index 1 mmio: [0xfd800000-0xfd8fffff]
[ 0.181984] bus: 03 index 2 mmio: [0xfd700000-0xfd7fffff]
[ 0.182244] bus: 03 index 3 mmio: [0x0-0x0]
[ 0.182499] bus: 04 index 0 io port: [0xa000-0xafff]
[ 0.182757] bus: 04 index 1 mmio: [0xfde00000-0xfdefffff]
[ 0.183018] bus: 04 index 2 mmio: [0xfdd00000-0xfddfffff]
[ 0.183278] bus: 04 index 3 mmio: [0x0-0x0]
[ 0.183533] bus: 05 index 0 io port: [0xb000-0xbfff]
[ 0.183790] bus: 05 index 1 mmio: [0xfdb00000-0xfdbfffff]
[ 0.184052] bus: 05 index 2 mmio: [0xfda00000-0xfdafffff]
[ 0.184311] bus: 05 index 3 io port: [0x00-0xffff]
[ 0.184568] bus: 05 index 4 mmio: [0x000000-0xffffffffffffffff]
[ 0.184834] NET: Registered protocol family 2
[ 0.195148] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.195812] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.197343] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.197962] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.198232] TCP reno registered
[ 0.201187] NET: Registered protocol family 1
[ 0.201521] checking if image is initramfs... it is
[ 0.369406] Freeing initrd memory: 4083k freed
[ 0.370876] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.371514] audit: initializing netlink socket (disabled)
[ 0.371787] type=2000 audit(1230536207.371:1): initialized
[ 0.376424] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.378177] VFS: Disk quotas dquot_6.5.1
[ 0.378476] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.379201] msgmni has been set to 4017
[ 0.379511] SELinux: Registering netfilter hooks
[ 0.379708] alg: No test for stdrng (krng)
[ 0.380025] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.380503] io scheduler noop registered
[ 0.380756] io scheduler anticipatory registered
[ 0.381015] io scheduler deadline registered
[ 0.381332] io scheduler cfq registered (default)
[ 0.381598] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x0f10
[ 0.381600] pci 0000:00:1a.0: Performing full reset
[ 0.381612] pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x0010
[ 0.381613] pci 0000:00:1a.1: Performing full reset
[ 0.381626] pci 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x0010
[ 0.381627] pci 0000:00:1a.2: Performing full reset
[ 0.381656] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x003b
[ 0.381657] pci 0000:00:1d.0: Performing full reset
[ 0.381670] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010
[ 0.381671] pci 0000:00:1d.1: Performing full reset
[ 0.381683] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010
[ 0.381684] pci 0000:00:1d.2: Performing full reset
[ 0.381715] pci 0000:01:00.0: Boot video device
[ 0.383808] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 0.383824] pcieport-driver 0000:00:01.0: found MSI capability
[ 0.384097] pcieport-driver 0000:00:01.0: irq 2303 for MSI/MSI-X
[ 0.384102] pci_express 0000:00:01.0:pcie00: allocate port service
[ 0.384125] pci_express 0000:00:01.0:pcie03: allocate port service
[ 0.384164] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.384185] pcieport-driver 0000:00:1c.0: found MSI capability
[ 0.384461] pcieport-driver 0000:00:1c.0: irq 2302 for MSI/MSI-X
[ 0.384468] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 0.384489] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 0.384510] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 0.384558] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 0.384579] pcieport-driver 0000:00:1c.1: found MSI capability
[ 0.384853] pcieport-driver 0000:00:1c.1: irq 2301 for MSI/MSI-X
[ 0.384864] pci_express 0000:00:1c.1:pcie00: allocate port service
[ 0.384885] pci_express 0000:00:1c.1:pcie02: allocate port service
[ 0.384906] pci_express 0000:00:1c.1:pcie03: allocate port service
[ 0.384955] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 0.384976] pcieport-driver 0000:00:1c.2: found MSI capability
[ 0.385251] pcieport-driver 0000:00:1c.2: irq 2300 for MSI/MSI-X
[ 0.385259] pci_express 0000:00:1c.2:pcie00: allocate port service
[ 0.385281] pci_express 0000:00:1c.2:pcie02: allocate port service
[ 0.385301] pci_express 0000:00:1c.2:pcie03: allocate port service
[ 0.385382] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.385753] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.386233] ACPI: Power Button (FF) [PWRF]
[ 0.386530] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.387013] ACPI: Power Button (CM) [PWRB]
[ 0.387322] fan PNP0C0B:00: registered as cooling_device0
[ 0.387584] ACPI: Fan [FAN] (on)
[ 0.388074] ACPI: SSDT 7FEE8140, 022A (r1 PmRef Cpu0Ist 3000 INTL 20041203)
[ 0.388742] processor ACPI_CPU:00: registered as cooling_device1
[ 0.389158] ACPI: SSDT 7FEE8600, 0152 (r1 PmRef Cpu1Ist 3000 INTL 20041203)
[ 0.389817] processor ACPI_CPU:01: registered as cooling_device2
[ 0.594703] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.655930] Switched to high resolution mode on CPU 1
[ 0.656160] Switched to high resolution mode on CPU 0
[ 0.993205] ACPI: Thermal Zone [THRM] (28 C)
[ 1.001281] Non-volatile memory driver v1.2
[ 1.001537] Linux agpgart interface v0.103
[ 1.001846] [drm] Initialized drm 1.1.0 20060810
[ 1.002139] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.003560] brd: module loaded
[ 1.004253] loop: module loaded
[ 1.004503] Intel(R) PRO/1000 Network Driver - version 7.3.20-k3-NAPI
[ 1.004767] Copyright (c) 1999-2006 Intel Corporation.
[ 1.005053] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI
[ 1.005318] e100: Copyright(c) 1999-2006 Intel Corporation
[ 1.005623] sky2 driver version 1.22
[ 1.005889] sky2 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.006167] sky2 0000:04:00.0: setting latency timer to 64
[ 1.006186] sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 3
[ 1.038584] sky2 0000:04:00.0: Marvell Yukon 88E8056 Gigabit Ethernet Controller
[ 1.039061] Part Number: Yukon 88E8056
[ 1.039062] Engineering Level: Rev. 1.3
[ 1.039063] Manufacturer: Marvell
[ 1.039104] sky2 0000:04:00.0: irq 2299 for MSI/MSI-X
[ 1.039269] sky2 eth0: addr 00:50:8d:9f:38:ab
[ 1.039613] console [netcon0] enabled
[ 1.039866] netconsole: network logging started
[ 1.040166] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.040688] Loading iSCSI transport class v2.0-870.
[ 1.041068] Driver 'sd' needs updating - please use bus_type methods
[ 1.041370] Driver 'sr' needs updating - please use bus_type methods
[ 1.041683] ahci 0000:00:1f.2: version 3.0
[ 1.041691] ahci 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.041970] ahci 0000:00:1f.2: irq 2298 for MSI/MSI-X
[ 1.042015] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.042499] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part ems
[ 1.042977] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.043202] scsi0 : ahci
[ 1.043528] scsi1 : ahci
[ 1.043834] scsi2 : ahci
[ 1.044142] scsi3 : ahci
[ 1.044448] scsi4 : ahci
[ 1.044754] scsi5 : ahci
[ 1.045109] ata1: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd100 irq 2298
[ 1.045589] ata2: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd180 irq 2298
[ 1.046067] ata3: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd200 irq 2298
[ 1.046546] ata4: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd280 irq 2298
[ 1.047024] ata5: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd300 irq 2298
[ 1.047503] ata6: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd380 irq 2298
[ 1.352022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.397759] ata1.00: ATA-7: ST3500630AS, 3.AAK, max UDMA/133
[ 1.398029] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.456077] ata1.00: configured for UDMA/133
[ 2.179019] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.221839] ata2.00: ATA-7: ST3500630AS, 3.AAK, max UDMA/133
[ 2.222105] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.280168] ata2.00: configured for UDMA/133
[ 2.585017] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.890017] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.195017] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.500017] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.500345] scsi 0:0:0:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5
[ 3.500928] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 3.501417] sd 0:0:0:0: [sda] Write Protect is off
[ 3.501675] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.501689] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.502216] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 3.502703] sd 0:0:0:0: [sda] Write Protect is off
[ 3.502960] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.502974] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.503464] sda: sda1 sda2
[ 3.520382] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.520692] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.521013] scsi 1:0:0:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5
[ 3.521582] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 3.522067] sd 1:0:0:0: [sdb] Write Protect is off
[ 3.522326] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.522340] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.522849] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 3.523337] sd 1:0:0:0: [sdb] Write Protect is off
[ 3.523595] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.523609] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.524093] sdb: sdb1 sdb2
[ 3.544839] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 3.545145] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 3.545624] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.545890] ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96
[ 3.545903] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.546181] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 3.546183] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 3.546474] drivers/usb/core/inode.c: creating file 'devices'
[ 3.546477] drivers/usb/core/inode.c: creating file '001'
[ 3.546508] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 3.546989] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
[ 3.546992] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr
[ 3.547007] ehci_hcd 0000:00:1a.7: reset command 080012 (park)=0 ithresh=8 Periodic period=1024 Reset HALT
[ 3.550891] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 3.550892] ehci_hcd 0000:00:1a.7: supports USB remote wakeup
[ 3.550900] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdfff000
[ 3.551165] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 3.555036] ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
[ 3.561013] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 3.561295] usb usb1: default language 0x0409
[ 3.561315] usb usb1: uevent
[ 3.561334] usb usb1: usb_probe_device
[ 3.561336] usb usb1: configuration #1 chosen from 1 choice
[ 3.561598] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 3.561608] usb 1-0:1.0: uevent
[ 3.561626] hub 1-0:1.0: usb_probe_interface
[ 3.561627] hub 1-0:1.0: usb_probe_interface - got id
[ 3.561629] hub 1-0:1.0: USB hub found
[ 3.561885] hub 1-0:1.0: 6 ports detected
[ 3.562141] hub 1-0:1.0: standalone hub
[ 3.562142] hub 1-0:1.0: no power switching (usb 1.0)
[ 3.562143] hub 1-0:1.0: individual port over-current protection
[ 3.562144] hub 1-0:1.0: power on to power good time: 20ms
[ 3.562147] hub 1-0:1.0: local power source is good
[ 3.562148] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 3.562207] drivers/usb/core/inode.c: creating file '001'
[ 3.562242] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.562508] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.562985] usb usb1: Product: EHCI Host Controller
[ 3.563244] usb usb1: Manufacturer: Linux 2.6.28 ehci_hcd
[ 3.563504] usb usb1: SerialNumber: 0000:00:1a.7
[ 3.563770] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.564045] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.564047] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.564328] drivers/usb/core/inode.c: creating file '002'
[ 3.564356] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 3.564836] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
[ 3.564838] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr
[ 3.564849] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 3.568745] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 3.568746] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
[ 3.568754] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffe000
[ 3.569018] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 3.572891] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
[ 3.578013] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.578293] usb usb2: default language 0x0409
[ 3.578314] usb usb2: uevent
[ 3.578333] usb usb2: usb_probe_device
[ 3.578334] usb usb2: configuration #1 chosen from 1 choice
[ 3.578597] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 3.578605] usb 2-0:1.0: uevent
[ 3.578623] hub 2-0:1.0: usb_probe_interface
[ 3.578624] hub 2-0:1.0: usb_probe_interface - got id
[ 3.578625] hub 2-0:1.0: USB hub found
[ 3.578880] hub 2-0:1.0: 6 ports detected
[ 3.579137] hub 2-0:1.0: standalone hub
[ 3.579138] hub 2-0:1.0: no power switching (usb 1.0)
[ 3.579139] hub 2-0:1.0: individual port over-current protection
[ 3.579140] hub 2-0:1.0: power on to power good time: 20ms
[ 3.579142] hub 2-0:1.0: local power source is good
[ 3.579143] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 3.579185] drivers/usb/core/inode.c: creating file '001'
[ 3.579218] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.579484] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.579960] usb usb2: Product: EHCI Host Controller
[ 3.580220] usb usb2: Manufacturer: Linux 2.6.28 ehci_hcd
[ 3.580479] usb usb2: SerialNumber: 0000:00:1d.7
[ 3.580757] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.581022] ohci_hcd: block sizes: ed 80 td 96
[ 3.581044] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.581322] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.581591] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3.581593] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 3.581875] drivers/usb/core/inode.c: creating file '003'
[ 3.581902] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 3.582384] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 3.582642] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 3.582643] uhci_hcd 0000:00:1a.0: Performing full reset
[ 3.582655] uhci_hcd 0000:00:1a.0: supports USB remote wakeup
[ 3.582662] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
[ 3.582942] usb usb3: default language 0x0409
[ 3.582963] usb usb3: uevent
[ 3.582982] usb usb3: usb_probe_device
[ 3.582983] usb usb3: configuration #1 chosen from 1 choice
[ 3.583247] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 3.583255] usb 3-0:1.0: uevent
[ 3.583274] hub 3-0:1.0: usb_probe_interface
[ 3.583275] hub 3-0:1.0: usb_probe_interface - got id
[ 3.583276] hub 3-0:1.0: USB hub found
[ 3.583532] hub 3-0:1.0: 2 ports detected
[ 3.583786] hub 3-0:1.0: standalone hub
[ 3.583786] hub 3-0:1.0: no power switching (usb 1.0)
[ 3.583787] hub 3-0:1.0: individual port over-current protection
[ 3.583789] hub 3-0:1.0: power on to power good time: 2ms
[ 3.583791] hub 3-0:1.0: local power source is good
[ 3.583792] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 3.583824] drivers/usb/core/inode.c: creating file '001'
[ 3.583856] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.584125] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.584601] usb usb3: Product: UHCI Host Controller
[ 3.584858] usb usb3: Manufacturer: Linux 2.6.28 uhci_hcd
[ 3.585120] usb usb3: SerialNumber: 0000:00:1a.0
[ 3.585387] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 3.585656] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 3.585658] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 3.585941] drivers/usb/core/inode.c: creating file '004'
[ 3.585968] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 3.586450] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 3.586709] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 3.586711] uhci_hcd 0000:00:1a.1: Performing full reset
[ 3.586722] uhci_hcd 0000:00:1a.1: supports USB remote wakeup
[ 3.586730] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
[ 3.587013] usb usb4: default language 0x0409
[ 3.587032] usb usb4: uevent
[ 3.587050] usb usb4: usb_probe_device
[ 3.587052] usb usb4: configuration #1 chosen from 1 choice
[ 3.587314] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 3.587323] usb 4-0:1.0: uevent
[ 3.587342] hub 4-0:1.0: usb_probe_interface
[ 3.587343] hub 4-0:1.0: usb_probe_interface - got id
[ 3.587344] hub 4-0:1.0: USB hub found
[ 3.587598] hub 4-0:1.0: 2 ports detected
[ 3.587852] hub 4-0:1.0: standalone hub
[ 3.587853] hub 4-0:1.0: no power switching (usb 1.0)
[ 3.587854] hub 4-0:1.0: individual port over-current protection
[ 3.587855] hub 4-0:1.0: power on to power good time: 2ms
[ 3.587857] hub 4-0:1.0: local power source is good
[ 3.587858] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 3.587889] drivers/usb/core/inode.c: creating file '001'
[ 3.587922] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.588190] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.588666] usb usb4: Product: UHCI Host Controller
[ 3.588924] usb usb4: Manufacturer: Linux 2.6.28 uhci_hcd
[ 3.589185] usb usb4: SerialNumber: 0000:00:1a.1
[ 3.589452] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 3.589720] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 3.589722] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 3.590005] drivers/usb/core/inode.c: creating file '005'
[ 3.590034] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 3.590514] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 3.590773] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 3.590774] uhci_hcd 0000:00:1a.2: Performing full reset
[ 3.590785] uhci_hcd 0000:00:1a.2: supports USB remote wakeup
[ 3.590792] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000fd00
[ 3.591074] usb usb5: default language 0x0409
[ 3.591095] usb usb5: uevent
[ 3.591113] usb usb5: usb_probe_device
[ 3.591114] usb usb5: configuration #1 chosen from 1 choice
[ 3.591375] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[ 3.591384] usb 5-0:1.0: uevent
[ 3.591401] hub 5-0:1.0: usb_probe_interface
[ 3.591402] hub 5-0:1.0: usb_probe_interface - got id
[ 3.591403] hub 5-0:1.0: USB hub found
[ 3.591659] hub 5-0:1.0: 2 ports detected
[ 3.591913] hub 5-0:1.0: standalone hub
[ 3.591914] hub 5-0:1.0: no power switching (usb 1.0)
[ 3.591914] hub 5-0:1.0: individual port over-current protection
[ 3.591916] hub 5-0:1.0: power on to power good time: 2ms
[ 3.591918] hub 5-0:1.0: local power source is good
[ 3.591919] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 3.591949] drivers/usb/core/inode.c: creating file '001'
[ 3.591982] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.592251] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.592726] usb usb5: Product: UHCI Host Controller
[ 3.592983] usb usb5: Manufacturer: Linux 2.6.28 uhci_hcd
[ 3.593245] usb usb5: SerialNumber: 0000:00:1a.2
[ 3.593512] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.593781] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.593783] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.594066] drivers/usb/core/inode.c: creating file '006'
[ 3.594093] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 3.594573] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 3.594833] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 3.594834] uhci_hcd 0000:00:1d.0: Performing full reset
[ 3.594845] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
[ 3.594847] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00
[ 3.595128] usb usb6: default language 0x0409
[ 3.595149] usb usb6: uevent
[ 3.595167] usb usb6: usb_probe_device
[ 3.595168] usb usb6: configuration #1 chosen from 1 choice
[ 3.595430] usb usb6: adding 6-0:1.0 (config #1, interface 0)
[ 3.595439] usb 6-0:1.0: uevent
[ 3.595456] hub 6-0:1.0: usb_probe_interface
[ 3.595457] hub 6-0:1.0: usb_probe_interface - got id
[ 3.595458] hub 6-0:1.0: USB hub found
[ 3.595713] hub 6-0:1.0: 2 ports detected
[ 3.595967] hub 6-0:1.0: standalone hub
[ 3.595968] hub 6-0:1.0: no power switching (usb 1.0)
[ 3.595969] hub 6-0:1.0: individual port over-current protection
[ 3.595970] hub 6-0:1.0: power on to power good time: 2ms
[ 3.595972] hub 6-0:1.0: local power source is good
[ 3.595973] hub 6-0:1.0: trying to enable port power on non-switchable hub
[ 3.596006] drivers/usb/core/inode.c: creating file '001'
[ 3.596043] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.596308] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.596784] usb usb6: Product: UHCI Host Controller
[ 3.597044] usb usb6: Manufacturer: Linux 2.6.28 uhci_hcd
[ 3.597304] usb usb6: SerialNumber: 0000:00:1d.0
[ 3.597571] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.597841] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.597842] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.598126] drivers/usb/core/inode.c: creating file '007'
[ 3.598157] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 3.598637] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 3.598895] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 3.598896] uhci_hcd 0000:00:1d.1: Performing full reset
[ 3.598907] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
[ 3.598910] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00
[ 3.599192] usb usb7: default language 0x0409
[ 3.599213] usb usb7: uevent
[ 3.599232] usb usb7: usb_probe_device
[ 3.599233] usb usb7: configuration #1 chosen from 1 choice
[ 3.599495] usb usb7: adding 7-0:1.0 (config #1, interface 0)
[ 3.599503] usb 7-0:1.0: uevent
[ 3.599522] hub 7-0:1.0: usb_probe_interface
[ 3.599523] hub 7-0:1.0: usb_probe_interface - got id
[ 3.599524] hub 7-0:1.0: USB hub found
[ 3.599779] hub 7-0:1.0: 2 ports detected
[ 3.600035] hub 7-0:1.0: standalone hub
[ 3.600036] hub 7-0:1.0: no power switching (usb 1.0)
[ 3.600037] hub 7-0:1.0: individual port over-current protection
[ 3.600038] hub 7-0:1.0: power on to power good time: 2ms
[ 3.600040] hub 7-0:1.0: local power source is good
[ 3.600041] hub 7-0:1.0: trying to enable port power on non-switchable hub
[ 3.600075] drivers/usb/core/inode.c: creating file '001'
[ 3.600107] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.600373] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.600849] usb usb7: Product: UHCI Host Controller
[ 3.601108] usb usb7: Manufacturer: Linux 2.6.28 uhci_hcd
[ 3.601368] usb usb7: SerialNumber: 0000:00:1d.1
[ 3.601635] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.601904] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.601906] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.602192] drivers/usb/core/inode.c: creating file '008'
[ 3.602220] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 3.602700] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 3.602959] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 3.602960] uhci_hcd 0000:00:1d.2: Performing full reset
[ 3.602971] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
[ 3.602974] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00
[ 3.603254] usb usb8: default language 0x0409
[ 3.603274] usb usb8: uevent
[ 3.603291] usb usb8: usb_probe_device
[ 3.603293] usb usb8: configuration #1 chosen from 1 choice
[ 3.603555] usb usb8: adding 8-0:1.0 (config #1, interface 0)
[ 3.603565] usb 8-0:1.0: uevent
[ 3.603583] hub 8-0:1.0: usb_probe_interface
[ 3.603584] hub 8-0:1.0: usb_probe_interface - got id
[ 3.603585] hub 8-0:1.0: USB hub found
[ 3.603842] hub 8-0:1.0: 2 ports detected
[ 3.604098] hub 8-0:1.0: standalone hub
[ 3.604098] hub 8-0:1.0: no power switching (usb 1.0)
[ 3.604099] hub 8-0:1.0: individual port over-current protection
[ 3.604100] hub 8-0:1.0: power on to power good time: 2ms
[ 3.604103] hub 8-0:1.0: local power source is good
[ 3.604104] hub 8-0:1.0: trying to enable port power on non-switchable hub
[ 3.604138] drivers/usb/core/inode.c: creating file '001'
[ 3.604172] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.604437] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.604913] usb usb8: Product: UHCI Host Controller
[ 3.605173] usb usb8: Manufacturer: Linux 2.6.28 uhci_hcd
[ 3.605433] usb usb8: SerialNumber: 0000:00:1d.2
[ 3.605739] usbcore: registered new interface driver usblp
[ 3.605998] Initializing USB Mass Storage driver...
[ 3.606291] usbcore: registered new interface driver usb-storage
[ 3.606553] USB Mass Storage support registered.
[ 3.606842] usbcore: registered new interface driver libusual
[ 3.607186] PNP: No PS/2 controller found. Probing ports directly.
[ 3.610134] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.610394] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.615042] mice: PS/2 mouse device common for all mice
[ 3.626123] rtc_cmos 00:03: RTC can wake from S4
[ 3.626420] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 3.626700] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 3.626991] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 3.627593] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 3.628099] cpuidle: using governor ladder
[ 3.628353] cpuidle: using governor menu
[ 3.634396] No iBFT detected.
[ 3.635066] modprobe used greatest stack depth: 5816 bytes left
[ 3.635469] usbcore: registered new interface driver hiddev
[ 3.635751] usbcore: registered new interface driver usbhid
[ 3.636015] usbhid: v2.6:USB HID core driver
[ 3.636298] Advanced Linux Sound Architecture Driver Version 1.0.18rc3.
[ 3.636989] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 3.637487] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 3.646922] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[ 3.662018] ehci_hcd 0000:00:1a.7: GetStatus port 1 status 001403 POWER sig=k CSC CONNECT
[ 3.662021] hub 1-0:1.0: port 1: status 0501 change 0001
[ 3.662027] ehci_hcd 0000:00:1a.7: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT
[ 3.662029] hub 1-0:1.0: port 2: status 0501 change 0001
[ 3.662035] ehci_hcd 0000:00:1a.7: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT
[ 3.662037] hub 1-0:1.0: port 3: status 0501 change 0001
[ 3.662043] ehci_hcd 0000:00:1a.7: GetStatus port 4 status 001403 POWER sig=k CSC CONNECT
[ 3.662045] hub 1-0:1.0: port 4: status 0501 change 0001
[ 3.673178] ALSA device list:
[ 3.673427] #0: HDA Intel at 0xfdff4000 irq 22
[ 3.673739] Netfilter messages via NETLINK v0.30.
[ 3.674006] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 3.674409] ctnetlink v0.93: registering with nfnetlink.
[ 3.675007] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.675281] TCP cubic registered
[ 3.675532] Initializing XFRM netlink socket
[ 3.675838] NET: Registered protocol family 10
[ 3.676641] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 3.676932] IPv6 over IPv4 tunneling driver
[ 3.677545] NET: Registered protocol family 17
[ 3.677899] RPC: Registered udp transport module.
[ 3.678158] RPC: Registered tcp transport module.
[ 3.678833] registered taskstats version 1
[ 3.679183] Magic number: 4:538:623
[ 3.679500] Freeing unused kernel memory: 524k freed
[ 3.679867] Write protecting the kernel read-only data: 6560k
[ 3.680288] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 3.685945] uhci_hcd 0000:00:1a.0: port 1 portsc 008a,00
[ 3.685954] uhci_hcd 0000:00:1a.0: port 2 portsc 0082,00
[ 3.687033] uhci_hcd 0000:00:1a.1: port 1 portsc 008a,00
[ 3.687042] uhci_hcd 0000:00:1a.1: port 2 portsc 008a,00
[ 3.691024] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 3.695022] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 3.700022] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 3.704058] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 3.762017] hub 1-0:1.0: state 7 ports 6 chg 001e evt 0000
[ 3.762023] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 3.762029] ehci_hcd 0000:00:1a.7: port 1 low speed --> companion
[ 3.813016] ehci_hcd 0000:00:1a.7: GetStatus port 1 status 003002 POWER OWNER sig=se0 CSC
[ 3.813031] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
[ 3.864315] ehci_hcd 0000:00:1a.7: port 2 high speed
[ 3.864317] ehci_hcd 0000:00:1a.7: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT
[ 3.915020] usb 1-2: new high speed USB device using ehci_hcd and address 3
[ 3.966189] ehci_hcd 0000:00:1a.7: port 2 high speed
[ 3.966191] ehci_hcd 0000:00:1a.7: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT
[ 4.029363] usb 1-2: uevent
[ 4.029406] usb 1-2: usb_probe_device
[ 4.029408] usb 1-2: configuration #1 chosen from 1 choice
[ 4.029824] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
[ 4.029838] usb 1-2:1.0: uevent
[ 4.029865] hub 1-2:1.0: usb_probe_interface
[ 4.029867] hub 1-2:1.0: usb_probe_interface - got id
[ 4.029868] hub 1-2:1.0: USB hub found
[ 4.030198] hub 1-2:1.0: 2 ports detected
[ 4.030454] hub 1-2:1.0: compound device; port removable status: FF
[ 4.030455] hub 1-2:1.0: ganged power switching
[ 4.030456] hub 1-2:1.0: global over-current protection
[ 4.030457] hub 1-2:1.0: Single TT
[ 4.030458] hub 1-2:1.0: TT requires at most 8 FS bit times (666 ns)
[ 4.030459] hub 1-2:1.0: power on to power good time: 100ms
[ 4.030697] hub 1-2:1.0: local power source is good
[ 4.030698] hub 1-2:1.0: no over-current condition exists
[ 4.030700] hub 1-2:1.0: enabling power on all ports
[ 4.030986] drivers/usb/core/inode.c: creating file '003'
[ 4.031027] usb 1-2: New USB device found, idVendor=0424, idProduct=2502
[ 4.031300] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.031571] hub 1-0:1.0: port 3, status 0501, change 0000, 480 Mb/s
[ 4.087816] ehci_hcd 0000:00:1a.7: port 3 full speed --> companion
[ 4.087819] ehci_hcd 0000:00:1a.7: GetStatus port 3 status 003801 POWER OWNER sig=j CONNECT
[ 4.087821] hub 1-0:1.0: port 3 not reset yet, waiting 50ms
[ 4.089136] md: raid1 personality registered for level 1
[ 4.091269] md: md1 stopped.
[ 4.130074] hub 1-2:1.0: port 1: status 0101 change 0001
[ 4.130322] hub 1-2:1.0: port 2: status 0101 change 0001
[ 4.134990] md: bind<sdb2>
[ 4.135358] md: bind<sda2>
[ 4.135999] raid1: raid set md1 active with 2 out of 2 mirrors
[ 4.136717] md1: bitmap initialized from disk: read 1/1 pages, set 32 bits
[ 4.136983] created bitmap (15 pages) for device md1
[ 4.138147] ehci_hcd 0000:00:1a.7: GetStatus port 3 status 003002 POWER OWNER sig=se0 CSC
[ 4.138167] hub 1-0:1.0: port 4, status 0501, change 0000, 480 Mb/s
[ 4.138171] ehci_hcd 0000:00:1a.7: port 4 low speed --> companion
[ 4.157250] mdadm used greatest stack depth: 5376 bytes left
[ 4.178243] md1: unknown partition table
[ 4.189025] ehci_hcd 0000:00:1a.7: GetStatus port 4 status 003002 POWER OWNER sig=se0 CSC
[ 4.189039] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0010
[ 4.189044] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002
[ 4.189049] uhci_hcd 0000:00:1a.0: port 1 portsc 01a3,00
[ 4.189054] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
[ 4.230154] usb 1-2: link qh256-0001/ffff88007e1a7140 start 255 [1/0 us]
[ 4.293025] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
[ 4.381166] EXT4-fs: barriers enabled
[ 4.392757] kjournald2 starting. Commit interval 60 seconds
[ 4.393032] EXT4-fs: delayed allocation enabled
[ 4.393292] EXT4-fs: file extents enabled
[ 4.393625] EXT4-fs: mballoc enabled
[ 4.393877] EXT4-fs: mounted filesystem with ordered data mode.
[ 4.395140] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 4.423853] SELinux: Disabled at runtime.
[ 4.424122] SELinux: Unregistering netfilter hooks
[ 4.440015] type=1404 audit(1230536211.440:2): selinux=0 auid=4294967295 ses=4294967295
[ 4.536951] usb 3-1: skipped 1 descriptor after interface
[ 4.541949] usb 3-1: default language 0x0409
[ 4.558982] usb 3-1: uevent
[ 4.558991] usb 3-1: usb_probe_device
[ 4.558992] usb 3-1: configuration #1 chosen from 1 choice
[ 4.561951] usb 3-1: adding 3-1:1.0 (config #1, interface 0)
[ 4.561963] usb 3-1:1.0: uevent
[ 4.561974] usbhid 3-1:1.0: usb_probe_interface
[ 4.561975] usbhid 3-1:1.0: usb_probe_interface - got id
[ 4.576175] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input3
[ 4.580131] uhci_hcd 0000:00:1a.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
[ 4.583153] generic-usb 0003:046D:C315.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:1a.0-1/input0
[ 4.583674] drivers/usb/core/inode.c: creating file '002'
[ 4.583697] usb 3-1: New USB device found, idVendor=046d, idProduct=c315
[ 4.583963] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.584232] usb 3-1: Product: Logitech USB Keyboard
[ 4.584490] usb 3-1: Manufacturer: Logitech
[ 4.584745] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0006
[ 4.584750] uhci_hcd 0000:00:1a.1: port 1 portsc 0093,00
[ 4.584754] hub 4-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
[ 4.688131] hub 4-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
[ 4.704007] usb usb5: suspend_rh (auto-stop)
[ 4.704024] usb usb6: suspend_rh (auto-stop)
[ 4.704040] usb usb7: suspend_rh (auto-stop)
[ 4.704057] usb usb8: suspend_rh (auto-stop)
[ 4.790129] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 4.912128] usb 4-1: ep0 maxpacket = 8
[ 4.938023] usb 4-1: default language 0x0409
[ 4.961054] usb 4-1: uevent
[ 4.961062] usb 4-1: usb_probe_device
[ 4.961063] usb 4-1: configuration #1 chosen from 1 choice
[ 4.969022] usb 4-1: adding 4-1:1.0 (config #1, interface 0)
[ 4.969032] usb 4-1:1.0: uevent
[ 4.975057] usb 4-1: adding 4-1:1.1 (config #1, interface 1)
[ 4.975067] usb 4-1:1.1: uevent
[ 4.975073] usblp 4-1:1.1: usb_probe_interface
[ 4.975074] usblp 4-1:1.1: usb_probe_interface - got id
[ 4.999024] drivers/usb/core/file.c: looking for a minor, starting at 0
[ 4.999044] usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0818
[ 4.999535] drivers/usb/core/inode.c: creating file '002'
[ 4.999557] usb 4-1: New USB device found, idVendor=04b8, idProduct=0818
[ 4.999826] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.000099] usb 4-1: Product: USB MFP
[ 5.000357] usb 4-1: Manufacturer: EPSON
[ 5.000613] usb 4-1: SerialNumber: L56020512121311560
[ 5.000878] uhci_hcd 0000:00:1a.1: port 2 portsc 01a3,00
[ 5.000883] hub 4-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s
[ 5.021297] mount used greatest stack depth: 5016 bytes left
[ 5.104131] hub 4-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301
[ 5.206129] usb 4-2: new low speed USB device using uhci_hcd and address 3
[ 5.350026] usb 4-2: skipped 1 descriptor after interface
[ 5.355026] usb 4-2: default language 0x0409
[ 5.370057] usb 4-2: uevent
[ 5.370066] usb 4-2: usb_probe_device
[ 5.370067] usb 4-2: configuration #1 chosen from 1 choice
[ 5.373026] usb 4-2: adding 4-2:1.0 (config #1, interface 0)
[ 5.373034] usb 4-2:1.0: uevent
[ 5.373045] usbhid 4-2:1.0: usb_probe_interface
[ 5.373046] usbhid 4-2:1.0: usb_probe_interface - got id
[ 5.391198] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input4
[ 5.397149] generic-usb 0003:046D:C50E.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1a.1-2/input0
[ 5.397669] drivers/usb/core/inode.c: creating file '003'
[ 5.397691] usb 4-2: New USB device found, idVendor=046d, idProduct=c50e
[ 5.397957] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.398226] usb 4-2: Product: USB RECEIVER
[ 5.398481] usb 4-2: Manufacturer: Logitech
[ 5.398736] hub 1-2:1.0: state 7 ports 2 chg 0006 evt 0000
[ 5.398841] hub 1-2:1.0: port 1, status 0101, change 0000, 12 Mb/s
[ 5.409206] hub 1-2:1.0: port 1 not reset yet, waiting 10ms
[ 5.471210] usb 1-2.1: new high speed USB device using ehci_hcd and address 6
[ 5.482203] hub 1-2:1.0: port 1 not reset yet, waiting 10ms
[ 5.556376] usb 1-2.1: uevent
[ 5.556386] usb 1-2.1: usb_probe_device
[ 5.556387] usb 1-2.1: configuration #1 chosen from 1 choice
[ 5.556459] usb 1-2.1: adding 1-2.1:1.0 (config #1, interface 0)
[ 5.556475] usb 1-2.1:1.0: uevent
[ 5.556483] hub 1-2.1:1.0: usb_probe_interface
[ 5.556484] hub 1-2.1:1.0: usb_probe_interface - got id
[ 5.556486] hub 1-2.1:1.0: USB hub found
[ 5.556584] hub 1-2.1:1.0: 4 ports detected
[ 5.556585] hub 1-2.1:1.0: standalone hub
[ 5.556586] hub 1-2.1:1.0: ganged power switching
[ 5.556587] hub 1-2.1:1.0: global over-current protection
[ 5.556735] hub 1-2.1:1.0: TT per port
[ 5.556736] hub 1-2.1:1.0: TT requires at most 8 FS bit times (666 ns)
[ 5.556738] hub 1-2.1:1.0: power on to power good time: 100ms
[ 5.556956] hub 1-2.1:1.0: local power source is good
[ 5.556958] hub 1-2.1:1.0: no over-current condition exists
[ 5.556959] hub 1-2.1:1.0: enabling power on all ports
[ 5.557459] drivers/usb/core/inode.c: creating file '006'
[ 5.557492] usb 1-2.1: New USB device found, idVendor=0424, idProduct=2504
[ 5.557494] usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.557583] hub 1-2:1.0: port 2, status 0101, change 0000, 12 Mb/s
[ 5.568087] hub 1-2:1.0: port 2 not reset yet, waiting 10ms
[ 5.630088] usb 1-2.2: new high speed USB device using ehci_hcd and address 7
[ 5.648086] hub 1-2:1.0: port 2 not reset yet, waiting 10ms
[ 5.657460] usb 1-2.1: link qh256-0001/ffff88007e1a7320 start 255 [1/0 us]
[ 5.701142] hub 2-0:1.0: hub_suspend
[ 5.701146] usb usb2: bus auto-suspend
[ 5.701148] ehci_hcd 0000:00:1d.7: suspend root hub
[ 5.701169] hub 5-0:1.0: hub_suspend
[ 5.701171] usb usb5: bus auto-suspend
[ 5.701172] usb usb5: suspend_rh
[ 5.701184] hub 6-0:1.0: hub_suspend
[ 5.701186] usb usb6: bus auto-suspend
[ 5.701187] usb usb6: suspend_rh
[ 5.701199] hub 7-0:1.0: hub_suspend
[ 5.701201] usb usb7: bus auto-suspend
[ 5.701202] usb usb7: suspend_rh
[ 5.704009] hub 8-0:1.0: hub_suspend
[ 5.704011] usb usb8: bus auto-suspend
[ 5.704012] usb usb8: suspend_rh
[ 5.743837] usb 1-2.2: skipped 1 descriptor after endpoint
[ 5.751836] usb 1-2.2: default language 0x0409
[ 5.791878] usb 1-2.2: uevent
[ 5.791889] usb 1-2.2: usb_probe_device
[ 5.791891] usb 1-2.2: configuration #1 chosen from 1 choice
[ 5.791961] usb 1-2.2: adding 1-2.2:1.0 (config #1, interface 0)
[ 5.791977] usb 1-2.2:1.0: uevent
[ 5.791987] usb-storage 1-2.2:1.0: usb_probe_interface
[ 5.791989] usb-storage 1-2.2:1.0: usb_probe_interface - got id
[ 5.792022] scsi6 : SCSI emulation for USB Mass Storage devices
[ 5.792096] drivers/usb/core/inode.c: creating file '007'
[ 5.792120] usb 1-2.2: New USB device found, idVendor=0424, idProduct=223a
[ 5.792122] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.792123] usb 1-2.2: Product: USB2223
[ 5.792124] usb 1-2.2: Manufacturer: SMSC
[ 5.792125] usb 1-2.2: SerialNumber: 000223223223
[ 5.792127] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 5.792129] hub 1-2:1.0: state 7 ports 2 chg 0000 evt 0004
[ 5.792133] usb-storage: device found at 7
[ 5.792134] usb-storage: waiting for device to settle before scanning
[ 5.792207] hub 1-2.1:1.0: state 7 ports 4 chg 0000 evt 0000
[ 5.828325] udevd version 127 started
[ 5.864753] usb usb3: uevent
[ 5.864764] usb 3-0:1.0: uevent
[ 5.864786] usb 3-1: uevent
[ 5.864796] usb 3-1:1.0: uevent
[ 5.864896] usb usb4: uevent
[ 5.864905] usb 4-0:1.0: uevent
[ 5.864925] usb 4-1: uevent
[ 5.864935] usb 4-1:1.0: uevent
[ 5.864964] usb 4-1:1.1: uevent
[ 5.865020] usb 4-2: uevent
[ 5.865030] usb 4-2:1.0: uevent
[ 5.865137] usb usb5: uevent
[ 5.865147] usb 5-0:1.0: uevent
[ 5.865199] usb usb1: uevent
[ 5.865209] usb 1-0:1.0: uevent
[ 5.865229] usb 1-2: uevent
[ 5.865239] usb 1-2.1: uevent
[ 5.865250] usb 1-2.1:1.0: uevent
[ 5.865279] usb 1-2.2: uevent
[ 5.865289] usb 1-2.2:1.0: uevent
[ 5.865344] usb 1-2:1.0: uevent
[ 5.865646] usb usb6: uevent
[ 5.865655] usb 6-0:1.0: uevent
[ 5.865707] usb usb7: uevent
[ 5.865717] usb 7-0:1.0: uevent
[ 5.865769] usb usb8: uevent
[ 5.865779] usb 8-0:1.0: uevent
[ 5.865831] usb usb2: uevent
[ 5.865841] usb 2-0:1.0: uevent
[ 6.060111] 3c59x 0000:05:03.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 6.060173] 3c59x: Donald Becker and others.
[ 6.060175] 0000:05:03.0: 3Com PCI 3c905B Cyclone 100baseTx at ffffc20010fa2000.
[ 6.060179] 3c59x 0000:05:03.0: setting latency timer to 64
[ 6.084097] modprobe used greatest stack depth: 4856 bytes left
[ 6.503676] ip used greatest stack depth: 4512 bytes left
[ 6.790624] md: md0 stopped.
[ 6.912837] md: bind<sdb1>
[ 6.912960] md: bind<sda1>
[ 6.916966] raid1: raid set md0 active with 2 out of 2 mirrors
[ 6.917366] md0: bitmap initialized from disk: read 1/1 pages, set 3 bits
[ 6.917367] created bitmap (13 pages) for device md0
[ 6.928089] md0: unknown partition table
[ 7.792014] hub 1-2.1:1.0: hub_suspend
[ 7.792020] usb 1-2.1: unlink qh256-0001/ffff88007e1a7320 start 255 [1/0 us]
[ 7.792346] usb 1-2.1: usb auto-suspend
[ 7.881545] EXT4 FS on dm-0, internal journal on dm-0:8
[ 7.935833] EXT4-fs: barriers enabled
[ 7.944665] kjournald2 starting. Commit interval 60 seconds
[ 7.957574] EXT4 FS on dm-4, internal journal on dm-4:8
[ 7.957576] EXT4-fs: delayed allocation enabled
[ 7.957577] EXT4-fs: file extents enabled
[ 7.958228] EXT4-fs: mballoc enabled
[ 7.958230] EXT4-fs: mounted filesystem with ordered data mode.
[ 7.983266] EXT4-fs: barriers enabled
[ 7.994202] kjournald2 starting. Commit interval 60 seconds
[ 7.994474] EXT4 FS on dm-3, internal journal on dm-3:8
[ 7.994476] EXT4-fs: delayed allocation enabled
[ 7.994477] EXT4-fs: file extents enabled
[ 7.994658] EXT4-fs: mballoc enabled
[ 7.994660] EXT4-fs: mounted filesystem with ordered data mode.
[ 8.007724] kjournald starting. Commit interval 60 seconds
[ 8.008046] EXT3 FS on md0, internal journal
[ 8.008049] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.410484] rc.sysinit used greatest stack depth: 4408 bytes left
[ 8.625472] microcode: CPU0 updated from revision 0xb3 to 0xb6, date = 2007-07-13
[ 8.630273] microcode: CPU1 updated from revision 0xb3 to 0xb6, date = 2007-07-13
[ 8.912361] sky2 eth0: enabling interface
[ 8.915586] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.797636] isa bounce pool size: 16 pages
[ 10.801256] scsi 6:0:0:0: Direct-Access SMSC 223 U HS-CF 3.60 PQ: 0 ANSI: 0
[ 10.805680] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 10.805720] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 10.807898] usb-storage: device scan complete
[ 14.518014] sky2 eth0: disabling interface
[ 14.600692] eth1: setting full-duplex.
[ 19.222969] sky2 eth0: enabling interface
[ 19.226140] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.650067] usb usb2: usb auto-resume
[ 20.650071] ehci_hcd 0000:00:1d.7: resume root hub
[ 20.691009] hub 2-0:1.0: hub_resume
[ 20.691067] usb usb8: usb auto-resume
[ 20.691069] usb usb8: wakeup_rh
[ 20.691643] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 20.722010] hub 8-0:1.0: hub_resume
[ 20.722025] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 20.722074] usb usb7: usb auto-resume
[ 20.722076] usb usb7: wakeup_rh
[ 20.754015] hub 7-0:1.0: hub_resume
[ 20.754031] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 20.754075] usb usb6: usb auto-resume
[ 20.754077] usb usb6: wakeup_rh
[ 20.786013] hub 6-0:1.0: hub_resume
[ 20.786029] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 20.786069] usb usb5: usb auto-resume
[ 20.786071] usb usb5: wakeup_rh
[ 20.818012] hub 5-0:1.0: hub_resume
[ 20.818028] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 20.818422] usb 1-2.1: usb auto-resume
[ 20.855174] usb 1-2.1: finish resume
[ 20.855421] hub 1-2.1:1.0: hub_resume
[ 20.855923] ehci_hcd 0000:00:1a.7: reused qh ffff88007e1a7320 schedule
[ 20.855925] usb 1-2.1: link qh256-0001/ffff88007e1a7320 start 255 [1/0 us]
[ 20.855931] hub 1-2.1:1.0: state 7 ports 4 chg 0000 evt 0000
[ 21.954030] usb usb8: suspend_rh (auto-stop)
[ 21.954049] usb usb7: suspend_rh (auto-stop)
[ 21.954066] usb usb6: suspend_rh (auto-stop)
[ 21.954082] usb usb5: suspend_rh (auto-stop)
[ 22.701137] hub 2-0:1.0: hub_suspend
[ 22.701143] usb usb2: bus auto-suspend
[ 22.701144] ehci_hcd 0000:00:1d.7: suspend root hub
[ 22.722024] hub 8-0:1.0: hub_suspend
[ 22.722028] usb usb8: bus auto-suspend
[ 22.722030] usb usb8: suspend_rh
[ 22.754022] hub 7-0:1.0: hub_suspend
[ 22.754025] usb usb7: bus auto-suspend
[ 22.754027] usb usb7: suspend_rh
[ 22.786022] hub 6-0:1.0: hub_suspend
[ 22.786025] usb usb6: bus auto-suspend
[ 22.786027] usb usb6: suspend_rh
[ 22.818013] hub 5-0:1.0: hub_suspend
[ 22.818017] usb usb5: bus auto-suspend
[ 22.818018] usb usb5: suspend_rh
[ 22.855013] hub 1-2.1:1.0: hub_suspend
[ 22.855018] usb 1-2.1: unlink qh256-0001/ffff88007e1a7320 start 255 [1/0 us]
[ 22.855310] usb 1-2.1: usb auto-suspend
[ 23.237449] JBD: barrier-based sync failed on dm-0:8 - disabling barriers
[ 23.369174] newaliases used greatest stack depth: 3912 bytes left
[ 23.486029] uhci_hcd 0000:00:1a.1: reserve dev 3 ep81-INT, period 8, phase 4, 118 us
[ 23.647853] JBD: barrier-based sync failed on dm-3:8 - disabling barriers
[ 24.989055] eth1: no IPv6 routers present
[ 50.718093] usb usb2: usb auto-resume
[ 50.718096] ehci_hcd 0000:00:1d.7: resume root hub
[ 50.757010] hub 2-0:1.0: hub_resume
[ 50.757030] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 50.757080] usb usb8: usb auto-resume
[ 50.757082] usb usb8: wakeup_rh
[ 50.789009] hub 8-0:1.0: hub_resume
[ 50.789027] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 50.789076] usb usb7: usb auto-resume
[ 50.789078] usb usb7: wakeup_rh
[ 50.821009] hub 7-0:1.0: hub_resume
[ 50.821026] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 50.821074] usb usb6: usb auto-resume
[ 50.821076] usb usb6: wakeup_rh
[ 50.853009] hub 6-0:1.0: hub_resume
[ 50.853026] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 50.853073] usb usb5: usb auto-resume
[ 50.853075] usb usb5: wakeup_rh
[ 50.885009] hub 5-0:1.0: hub_resume
[ 50.885027] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 50.885343] usb 1-2.1: usb auto-resume
[ 50.914351] hub 1-2:1.0: state 7 ports 2 chg 0000 evt 0002
[ 50.922098] usb 1-2.1: finish resume
[ 50.922345] hub 1-2.1:1.0: hub_resume
[ 50.922846] ehci_hcd 0000:00:1a.7: reused qh ffff88007e1a7320 schedule
[ 50.922847] usb 1-2.1: link qh256-0001/ffff88007e1a7320 start 255 [1/0 us]
[ 50.922853] hub 1-2.1:1.0: state 7 ports 4 chg 0000 evt 0000
[ 51.954021] usb usb8: suspend_rh (auto-stop)
[ 51.954039] usb usb7: suspend_rh (auto-stop)
[ 51.954055] usb usb6: suspend_rh (auto-stop)
[ 51.954071] usb usb5: suspend_rh (auto-stop)




\
 
 \ /
  Last update: 2008-12-30 22:49    [from the cache]
©2003-2014 Jasper Spaans. Advertise on this site