lkml.org 
[lkml]   [2008]   [Dec]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH 4/7] it821x: use ide_get_pair_dev() helper
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] it821x: use ide_get_pair_dev() helper

Because presence of the peer device was not checked in
it821x_set_pio_mode() PIO0 mode was used for taskfile PIO
in single device configurations.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/it821x.c | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)

Index: b/drivers/ide/it821x.c
===================================================================
--- a/drivers/ide/it821x.c
+++ b/drivers/ide/it821x.c
@@ -167,12 +167,10 @@ static void it821x_clock_strategy(ide_dr
ide_hwif_t *hwif = drive->hwif;
struct pci_dev *dev = to_pci_dev(hwif->dev);
struct it821x_dev *itdev = ide_get_hwifdata(hwif);
- ide_drive_t *pair;
+ ide_drive_t *pair = ide_get_pair_dev(drive);
int clock, altclock, sel = 0;
u8 unit = drive->dn & 1, v;

- pair = &hwif->drives[1 - unit];
-
if(itdev->want[0][0] > itdev->want[1][0]) {
clock = itdev->want[0][1];
altclock = itdev->want[1][1];
@@ -239,15 +237,13 @@ static void it821x_set_pio_mode(ide_driv
{
ide_hwif_t *hwif = drive->hwif;
struct it821x_dev *itdev = ide_get_hwifdata(hwif);
- ide_drive_t *pair;
+ ide_drive_t *pair = ide_get_pair_dev(drive);
u8 unit = drive->dn & 1, set_pio = pio;

/* Spec says 89 ref driver uses 88 */
static u16 pio_timings[]= { 0xAA88, 0xA382, 0xA181, 0x3332, 0x3121 };
static u8 pio_want[] = { ATA_66, ATA_66, ATA_66, ATA_66, ATA_ANY };

- pair = &hwif->drives[1 - unit];
-
/*
* Compute the best PIO mode we can for a given device. We must
* pick a speed that does not cause problems with the other device

\
 
 \ /
  Last update: 2008-12-21 22:03    [W:0.052 / U:0.756 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site