lkml.org 
[lkml]   [2008]   [Dec]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[patch 4/8] SDHCI: Add quirk for controller with no end-of-busy IRQ
The Samsung SDHCI controller block seems to fail to generate an
INT_DATA_END after the transfer has completed and the bus busy
state finished.

Changes in e809517f6fa5803a5a1cd56026f0e2190fc13d5c to use the
new busy method are the cause of the behaviour change.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Index: linux.git/drivers/mmc/host/sdhci.c
===================================================================
--- linux.git.orig/drivers/mmc/host/sdhci.c 2008-12-01 19:31:15.000000000 +0000
+++ linux.git/drivers/mmc/host/sdhci.c 2008-12-01 19:43:30.000000000 +0000
@@ -1294,8 +1294,11 @@ static void sdhci_cmd_irq(struct sdhci_h
if (host->cmd->data)
DBG("Cannot wait for busy signal when also "
"doing a data transfer");
- else
+ else if (!(host->quirks & SDHCI_QUIRK_NO_BUSY_IRQ))
return;
+
+ /* The controller does not support the end-of-busy IRQ,
+ * fall through and take the SDHCI_INT_RESPONSE */
}

if (intmask & SDHCI_INT_RESPONSE)
Index: linux.git/drivers/mmc/host/sdhci.h
===================================================================
--- linux.git.orig/drivers/mmc/host/sdhci.h 2008-12-01 19:31:15.000000000 +0000
+++ linux.git/drivers/mmc/host/sdhci.h 2008-12-01 19:42:27.000000000 +0000
@@ -210,6 +210,8 @@ struct sdhci_host {
#define SDHCI_QUIRK_BROKEN_SMALL_PIO (1<<13)
/* Controller supports high speed but doesn't have the caps bit set */
#define SDHCI_QUIRK_FORCE_HIGHSPEED (1<<14)
+/* Controller does not provide transfer-complete interrupt when not busy */
+#define SDHCI_QUIRK_NO_BUSY_IRQ (1<<15)

int irq; /* Device IRQ */
void __iomem * ioaddr; /* Mapped address */
--
Ben (ben@fluff.org, http://www.fluff.org/)

'a smiley only costs 4 bytes'


\
 
 \ /
  Last update: 2008-12-02 16:43    [from the cache]
©2003-2014 Jasper Spaans. Advertise on this site