lkml.org 
[lkml]   [2008]   [Dec]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC PATCH crypto] AES: Add support to Intel AES-NI instructions
From
Date
On Sat, 2008-12-13 at 03:57 +0800, Sebastian Andrzej Siewior wrote:
> * Huang Ying | 2008-12-12 12:08:46 [+0800]:
>
> >Add support to Intel AES-NI instructions for x86_64 platform.
> >
> >Intel AES-NI is a new set of Single Instruction Multiple Data (SIMD)
> >instructions that are going to be introduced in the next generation of
> >Intel processor, as of 2009. These instructions enable fast and secure
> >data encryption and decryption, using the Advanced Encryption Standard
> >(AES), defined by FIPS Publication number 197. The architecture
> >introduces six instructions that offer full hardware support for
> >AES. Four of them support high performance data encryption and
> >decryption, and the other two instructions support the AES key
> >expansion procedure.
> >
> >The white paper can be downloaded from:
> >
> >http://softwarecommunity.intel.com/isn/downloads/intelavx/AES-Instructions-Set_WP.pdf
> >
> >AES may be used in soft_irq context, but MMX/SSE context can not be
> >touched safely in soft_irq context. So in_interrupt() is checked, if
> >in IRQ or soft_irq context, the general x86_64 implementation are used
> >instead.
>
> Nice work. A few things:
> - Did you rename the "old" x86 functions to avoid a clash?
> So you bypass the crypto layer in case you can't handle the operation.
> Does this improve the performace or just saves key strokes? Not sure
> what the best sollution could be....

The general x86 implementation is used as the fall back for new AES-NI
based implementation. Because AES-NI can not be used in kernel soft_irq
context. If crypto layer is used to access general x86 implementation,
we will have tfm_ctx alignment issue, because AES-NI need tfm_ctx to be
16 byte aligned.

> - unless I've read the code too fast, it does not work if someone sets the
> key in user context and starts an encryption in softirq context.

Oh, I should use struct crypto_aes_ctx instead of define struct aes_ctx.
The tfm_ctx definition is different. I will fix this. Except that, is
there any other issue?

> - aes_ctx is somehow bad. You are using this for a function and a
> struct. An Intel prefix would be nice (in case of the struct). On a
> second thought, any reason why you can't use crypto_aes_ctx?

Yes. I will use that. The only issue is that AES-NI need scheduled key
to be 16 bytes aligned, so we need move key_length in struct
crypto_aes_ctx to the end of the struct.

> - Is this an Intel thing or is going to be part of X86 and also
> available to others (like mmx). In that case the Intel prefix may be
> "wrong".

Now it is an Intel thing. But in the future it may become part of x86.
Intel named it as AES-NI (AES New Instructions), but name like
aes_ni_aes_set_key is not good too. Does aes_ni_set_key sound better?

> - does the cpu support more than just pure aes e.g. block modes? In case
> it does not, does the perfomance improve if you implement lets say
> cbc(aes) and do the xor with sse in order to save a few
> kernel_fpu_begin() calls? I'm just asking because I saw a similar
> thing and PowerPC and the AltiVec unit. Maybe it is cheap on x86 :)

Yes. AES-NI can benefit not only block modes. And the pipeline
implementation of AES-NI can benefit cbc(aes) decryption and ctr(aes)
even more (described in detail in white paper). We will work on that.

> - I can't see how why the intel-aes alias is required.

Yes. I will remove it.

Best Regards,
Huang Ying

[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2008-12-15 03:21    [W:0.069 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site