lkml.org 
[lkml]   [2008]   [Dec]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH] x86: create drivers/x86/ from drivers/misc/


On Sat, 29 Nov 2008, Sam Ravnborg wrote:

> Comments below in case we stick to this drivers/x86 thing...

now the "drivers/platform/x86/ thing"
aka the "get rid of drivers/misc/ thing":-)

> > diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
> > index 93224b5..b89db1e 100644
> > --- a/arch/x86/Kconfig
> > +++ b/arch/x86/Kconfig
> > @@ -1904,6 +1904,8 @@ source "drivers/Kconfig"
> >
> > source "drivers/firmware/Kconfig"
> >
> > +source "drivers/x86/Kconfig"
> > +
> > source "fs/Kconfig"
>
> Any chance we can have this in drivers/Kconfig?
>
> Just wrap all of the file in an
>
> if X86
> .....
> endif
>
> So we keep all the drivers/ stuff in one Kconfig file and
> not spread all over.

grep 'source "drivers"' arch/x86/Kconfig

source "drivers/acpi/Kconfig"
source "drivers/cpuidle/Kconfig"
source "drivers/idle/Kconfig"
source "drivers/pci/pcie/Kconfig"
source "drivers/pci/Kconfig"
source "drivers/eisa/Kconfig"
source "drivers/mca/Kconfig"
source "drivers/pcmcia/Kconfig"
source "drivers/pci/hotplug/Kconfig"
source "drivers/Kconfig"
source "drivers/firmware/Kconfig"
source "drivers/x86/Kconfig"

Are the lines above a good example, a bad example,
or did I miss a nuance of the grand Kconfig design?

I really don't care one way or another, but there
seem to be examples of both ways...

> > diff --git a/arch/x86/Makefile b/arch/x86/Makefile
> > index d1a47ad..a750519 100644
> > --- a/arch/x86/Makefile
> > +++ b/arch/x86/Makefile
> > @@ -171,6 +171,9 @@ ifeq ($(CONFIG_X86_32),y)
> > drivers-$(CONFIG_FB) += arch/x86/video/
> > endif
> >
> > +# x86 platform-specific drivers
> > +drivers-y += drivers/x86/
> > +
>
> Can this be included in drivers/Makefile like this:
>
> obj-$(CONFIG_X86) += x86/
>
> Notice that parisc already do the same. (Yes they have
> a drivers/parisc dir).
>
> We shall try to visit our tree in natural order when we build
> and such a rule breaks this.
> Also it is good to keep drivers/ stuff in one place.

sure, that sounds reasonable.

> > +++ b/drivers/x86/Kconfig
> > @@ -0,0 +1,290 @@
> > +#
> > +# X86 Platform Specific Drivers
> > +#
> > +
> > +menuconfig X86_PLATFORM_DEVICES
> > + bool "X86 Platform devices"
> > + default y
> > + ---help---
> > + Say Y here to get to see options for device drivers for various
> > + x86 platforms, including vendor-specific laptop extension drivers.
> > + This option alone does not add any kernel code.
> > +
> > + If you say N, all options in this submenu will be skipped and disabled.
> > +
> > +if X86_PLATFORM_DEVICES
> > +
> > +config ACER_WMI
> > + tristate "Acer WMI Laptop Extras (EXPERIMENTAL)"
> spaces => tab
>
> > +config ASUS_LAPTOP
> > + tristate "Asus Laptop Extras (EXPERIMENTAL)"
> > + depends on ACPI
> spaces => tab
>
> > +config FUJITSU_LAPTOP
> > + tristate "Fujitsu Laptop Extras"
> > + depends on ACPI
> > + depends on INPUT
> > + depends on BACKLIGHT_CLASS_DEVICE
> > + ---help---
> spaces => tab
>
> > +config HP_WMI
> > + tristate "HP WMI extras"
> > + depends on ACPI_WMI
> > + depends on INPUT
> > + depends on RFKILL
> > + help
> > + Say Y here if you want to support WMI-based hotkeys on HP laptops and
> spaces => tab
>
> > + to read data from WMI such as docking or ambient light sensor state.
> > +
> > + To compile this driver as a module, choose M here: the module will
> > + be called hp-wmi.
> > +
> > +config MSI_LAPTOP
> > + tristate "MSI Laptop Extras"
> > + depends on ACPI
> > + depends on BACKLIGHT_CLASS_DEVICE
> > + ---help---
> spaces => tab
>
> > diff --git a/drivers/x86/Makefile b/drivers/x86/Makefile
> > new file mode 100644
> > index 0000000..4f14f28
> > --- /dev/null
> > +++ b/drivers/x86/Makefile
> > @@ -0,0 +1,17 @@
> > +#
> > +# x86 Platform-Specific Drivers
> > +#
> > +obj- := x86.o # Dummy rule to force built-in.o to be made
>
> This is not needed. I can see divers/misc uses the same
> but it is bogus.

Yes, all of this text came from the existing drivers/misc/
I'll fix it.

thanks,
-Len



\
 
 \ /
  Last update: 2008-12-01 06:03    [W:0.175 / U:0.820 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site