lkml.org 
[lkml]   [2008]   [Nov]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: Is the PCI serial driver code GPL v2 or v3
On Thu, Nov 06, 2008 at 08:15:01PM +0000, Russell King wrote:
> On Thu, Nov 06, 2008 at 11:39:44AM -0800, Lee Howard wrote:
> > The "hack" originates from code done by Oxford Semiconductor. I would be
> > happy to have it done with the quirk system, and I am willing to write a
> > patch to that effect. My guess, however, would be that I'll still not do it
> > in your favorite way, and so I'm asking if you would like me to write the
> > code change or will you (or someone else here familiar with the favorite
> > ways) do it?
>
> There's plenty of examples in there, eg, pci_timedia_init, pci_netmos_init,
> and pci_ite887x_init all have a variable number of ports. Here's a patch
> which converts it:

And here's a patch (to be applied on top of the last) which prevents
this happening again by making use of 'const'.

diff -u b/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
--- b/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -42,7 +42,8 @@
u32 subvendor;
u32 subdevice;
int (*init)(struct pci_dev *dev);
- int (*setup)(struct serial_private *, struct pciserial_board *,
+ int (*setup)(struct serial_private *,
+ const struct pciserial_board *,
struct uart_port *, int);
void (*exit)(struct pci_dev *dev);
};
@@ -107,7 +108,7 @@
* ADDI-DATA GmbH communication cards <info@addi-data.com>
*/
static int addidata_apci7800_setup(struct serial_private *priv,
- struct pciserial_board *board,
+ const struct pciserial_board *board,
struct uart_port *port, int idx)
{
unsigned int bar = 0, offset = board->first_offset;
@@ -134,7 +135,7 @@
* Not that ugly ;) -- HW
*/
static int
-afavlab_setup(struct serial_private *priv, struct pciserial_board *board,
+afavlab_setup(struct serial_private *priv, const struct pciserial_board *board,
struct uart_port *port, int idx)
{
unsigned int bar, offset = board->first_offset;
@@ -188,8 +189,9 @@
* some serial ports are supposed to be hidden on certain models.
*/
static int
-pci_hp_diva_setup(struct serial_private *priv, struct pciserial_board *board,
- struct uart_port *port, int idx)
+pci_hp_diva_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
+ struct uart_port *port, int idx)
{
unsigned int offset = board->first_offset;
unsigned int bar = FL_GET_BASE(board->flags);
@@ -306,7 +308,7 @@

/* SBS Technologies Inc. PMC-OCTPRO and P-OCTAL cards */
static int
-sbs_setup(struct serial_private *priv, struct pciserial_board *board,
+sbs_setup(struct serial_private *priv, const struct pciserial_board *board,
struct uart_port *port, int idx)
{
unsigned int bar, offset = board->first_offset;
@@ -463,7 +465,7 @@
}

static int pci_siig_setup(struct serial_private *priv,
- struct pciserial_board *board,
+ const struct pciserial_board *board,
struct uart_port *port, int idx)
{
unsigned int bar = FL_GET_BASE(board->flags) + idx, offset = 0;
@@ -534,7 +536,8 @@
* Ugh, this is ugly as all hell --- TYT
*/
static int
-pci_timedia_setup(struct serial_private *priv, struct pciserial_board *board,
+pci_timedia_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
struct uart_port *port, int idx)
{
unsigned int bar = 0, offset = board->first_offset;
@@ -568,7 +571,7 @@
*/
static int
titan_400l_800l_setup(struct serial_private *priv,
- struct pciserial_board *board,
+ const struct pciserial_board *board,
struct uart_port *port, int idx)
{
unsigned int bar, offset = board->first_offset;
@@ -770,7 +773,8 @@
}

static int
-pci_default_setup(struct serial_private *priv, struct pciserial_board *board,
+pci_default_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
struct uart_port *port, int idx)
{
unsigned int bar, offset = board->first_offset, maxnr;
@@ -1099,7 +1103,7 @@
}

static inline int get_pci_irq(struct pci_dev *dev,
- struct pciserial_board *board)
+ const struct pciserial_board *board)
{
if (board->flags & FL_NOIRQ)
return 0;
@@ -1894,8 +1898,8 @@
}

static inline int
-serial_pci_matches(struct pciserial_board *board,
- struct pciserial_board *guessed)
+serial_pci_matches(const struct pciserial_board *board,
+ const struct pciserial_board *guessed)
{
return
board->num_ports == guessed->num_ports &&
@@ -1906,7 +1910,7 @@
}

struct serial_private *
-pciserial_init_ports(struct pci_dev *dev, struct pciserial_board *board)
+pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board)
{
struct uart_port serial_port;
struct serial_private *priv;
@@ -2039,7 +2043,8 @@
pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
{
struct serial_private *priv;
- struct pciserial_board *board, tmp;
+ const struct pciserial_board *board;
+ struct pciserial_board tmp;
int rc;

if (ent->driver_data >= ARRAY_SIZE(pci_boards)) {
@@ -2066,7 +2071,7 @@
* We matched one of our class entries. Try to
* determine the parameters of this board.
*/
- rc = serial_pci_guess_board(dev, board);
+ rc = serial_pci_guess_board(dev, &tmp);
if (rc)
goto disable;
} else {
only in patch2:
unchanged:
--- a/include/linux/8250_pci.h
+++ b/include/linux/8250_pci.h
@@ -31,7 +31,7 @@ struct pciserial_board {
struct serial_private;

struct serial_private *
-pciserial_init_ports(struct pci_dev *dev, struct pciserial_board *board);
+pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board);
void pciserial_remove_ports(struct serial_private *priv);
void pciserial_suspend_ports(struct serial_private *priv);
void pciserial_resume_ports(struct serial_private *priv);

--
Russell King
Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/
maintainer of:


\
 
 \ /
  Last update: 2008-11-06 21:37    [W:0.060 / U:0.860 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site