Messages in this thread | | | Date | Tue, 4 Nov 2008 02:13:39 +0100 | From | "Piotr Łobacz" <> | Subject | latest kernel 2.6.27 and error message 'pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff]' |
| |
Hi all, I have strange error message when I boot my linux with latest kerner just like in the subject.
I give you my /proc/iomem: 00000000-0009f7ff : System RAM 0009f800-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000cdfff : Video ROM 000ce000-000cf9ff : Adapter ROM 000dc000-000fffff : reserved 000f0000-000fffff : System ROM 00100000-3fecffff : System RAM 00100000-0048a7c2 : Kernel code 0048a7c3-00595e97 : Kernel data 005e4000-0062e767 : Kernel bss 3fed0000-3fee2fff : ACPI Non-volatile Storage 3fee3000-3fffffff : reserved 50000000-500000ff : 0000:00:1f.3 c6000000-c7ffffff : PCI Bus 0000:06 c6000000-c600ffff : 0000:06:00.0 c6000000-c600ffff : tg3 c9000000-caffffff : PCI Bus 0000:01 c9000000-c9ffffff : 0000:01:00.0 c9000000-c9ffffff : nvidia ca000000-caffffff : 0000:01:00.0 cc000000-cdffffff : PCI Bus 0000:06 d0000000-dfffffff : PCI Bus 0000:01 d0000000-dfffffff : 0000:01:00.0 d0000000-d09fffff : uvesafb e0000000-efffffff : PCI MMCONFIG 0 e0000000-efffffff : reserved f0000000-f1ffffff : PCI Bus 0000:02 f2000000-f3ffffff : PCI Bus 0000:04 f4000000-f5ffffff : PCI Bus 0000:05 f6000000-f7ffffff : PCI Bus 0000:02 f8000000-f9ffffff : PCI Bus 0000:04 f8000000-f8001fff : 0000:04:00.0 f8000000-f8001fff : iwlagn fa000000-fbffffff : PCI Bus 0000:05 fc000000-fc0fffff : PCI Bus 0000:08 fc000000-fc0007ff : 0000:08:06.0 fc000000-fc0007ff : ohci1394 fc000800-fc0008ff : 0000:08:06.1 fc000800-fc0008ff : mmc0 fc000c00-fc000cff : 0000:08:06.2 fc001000-fc0010ff : 0000:08:06.3 fc300000-fc303fff : 0000:00:1b.0 fc300000-fc303fff : ICH HD audio fc304000-fc3043ff : 0000:00:1a.7 fc304000-fc3043ff : ehci_hcd fc304400-fc3047ff : 0000:00:1d.7 fc304400-fc3047ff : ehci_hcd fec00000-fec0ffff : reserved fed00000-fed003ff : HPET 0 fed00000-fed003ff : reserved fed14000-fed19fff : reserved fed1c000-fed8ffff : reserved fee00000-fee00fff : Local APIC fee00000-fee00fff : reserved ff000000-ffffffff : reserved
and all information from dmesg: HighMem 0x00038000 -> 0x0003fed0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0003fed0 On node 0 totalpages: 261743 free_area_init_node: node 0, pgdat c0584000, node_mem_map c1000000 DMA zone: 3967 pages, LIFO batch:0 Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 32210 pages, LIFO batch:7 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) PERCPU: Allocating 37148 bytes of per cpu data NR_CPUS: 8, nr_cpu_ids: 2, nr_node_ids 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259697 Kernel command line: root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/sda3 udev acpi_osi=Linux acpi_sleep=s3_bios,s3_mode video=uvesafb:ywrap,mtrr,1280x1024-32@75 splash=silent,theme:livecd-2007.0,profile console=tty1 quiet ACPI: Added _OSI(Linux) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Extended CMOS year: 2000 TSC: PIT calibration confirmed by PMTIMER. TSC: using PIT calibration value Detected 2094.726 MHz processor. Console: colour VGA+ 80x25 console [tty1] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1030192k/1047360k available (3625k kernel code, 16464k reserved, 1069k data, 288k init, 129856k highmem) virtual kernel memory layout: fixmap : 0xfff51000 - 0xfffff000 ( 696 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc059c000 - 0xc05e4000 ( 288 kB) .data : 0xc048a7c3 - 0xc0595e98 (1069 kB) .text : 0xc0100000 - 0xc048a7c3 (3625 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated hpet clockevent registered Calibrating delay loop (skipped), value calculated using timer frequency.. 4189.45 BogoMIPS (lpj=2094726) Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 3072K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. using mwait in idle threads. Checking 'hlt' instruction... OK. ACPI: Core revision 20080609 ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz stepping 06 Booting processor 1/1 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4440.64 BogoMIPS (lpj=2220321) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 3072K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (8630.09 BogoMIPS). net_namespace: 596 bytes NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query honored via cmdline ACPI: DMI System Vendor: LENOVO ACPI: DMI Product Name: 0769K2G ACPI: DMI Product Version: 3000 N200 ACPI: DMI Board Name: IEL10 ACPI: DMI BIOS Vendor: LENOVO ACPI: DMI BIOS Date: 01/03/2008 ACPI: Please send DMI info above to linux-acpi@vger.kernel.org ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: EC: GPE storm detected, disabling EC GPE ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in poll mode ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled PCI: 0000:00:1a.0 reg 20 io port: [1800, 181f] PCI: 0000:00:1a.1 reg 20 io port: [1820, 183f] PCI: 0000:00:1a.7 reg 10 32bit mmio: [fc304000, fc3043ff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled PCI: 0000:00:1b.0 reg 10 64bit mmio: [fc300000, fc303fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled PCI: 0000:00:1d.0 reg 20 io port: [1840, 185f] PCI: 0000:00:1d.1 reg 20 io port: [1860, 187f] PCI: 0000:00:1d.2 reg 20 io port: [1880, 189f] PCI: 0000:00:1d.7 reg 10 32bit mmio: [fc304400, fc3047ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO PCI: 0000:00:1f.1 reg 10 io port: [0, 7] PCI: 0000:00:1f.1 reg 14 io port: [0, 3] PCI: 0000:00:1f.1 reg 18 io port: [0, 7] PCI: 0000:00:1f.1 reg 1c io port: [0, 3] PCI: 0000:00:1f.1 reg 20 io port: [18a0, 18af] PCI: 0000:00:1f.2 reg 10 io port: [18f8, 18ff] PCI: 0000:00:1f.2 reg 14 io port: [18cc, 18cf] PCI: 0000:00:1f.2 reg 18 io port: [18f0, 18f7] PCI: 0000:00:1f.2 reg 1c io port: [18c8, 18cb] PCI: 0000:00:1f.2 reg 20 io port: [18e0, 18ef] PCI: 0000:00:1f.2 reg 24 io port: [18d0, 18df] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled PCI: 0000:00:1f.3 reg 10 32bit mmio: [0, ff] PCI: 0000:00:1f.3 reg 20 io port: [1c00, 1c1f] PCI: 0000:01:00.0 reg 10 32bit mmio: [c9000000, c9ffffff] PCI: 0000:01:00.0 reg 14 32bit mmio: [d0000000, dfffffff] PCI: 0000:01:00.0 reg 1c 64bit mmio: [ca000000, caffffff] PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff] PCI: bridge 0000:00:01.0 32bit mmio: [c9000000, caffffff] PCI: bridge 0000:00:01.0 64bit mmio pref: [d0000000, dfffffff] PCI: bridge 0000:00:1c.0 io port: [2000, 2fff] PCI: bridge 0000:00:1c.0 32bit mmio: [f6000000, f7ffffff] PCI: bridge 0000:00:1c.0 64bit mmio pref: [f0000000, f1ffffff] PCI: 0000:04:00.0 reg 10 64bit mmio: [f8000000, f8001fff] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold pci 0000:04:00.0: PME# disabled PCI: bridge 0000:00:1c.1 io port: [3000, 3fff] PCI: bridge 0000:00:1c.1 32bit mmio: [f8000000, f9ffffff] PCI: bridge 0000:00:1c.1 64bit mmio pref: [f2000000, f3ffffff] PCI: bridge 0000:00:1c.2 io port: [4000, 4fff] PCI: bridge 0000:00:1c.2 32bit mmio: [fa000000, fbffffff] PCI: bridge 0000:00:1c.2 64bit mmio pref: [f4000000, f5ffffff] PCI: 0000:06:00.0 reg 10 64bit mmio: [c6000000, c600ffff] pci 0000:06:00.0: PME# supported from D3hot D3cold pci 0000:06:00.0: PME# disabled PCI: bridge 0000:00:1c.3 io port: [5000, 5fff] PCI: bridge 0000:00:1c.3 32bit mmio: [c6000000, c7ffffff] PCI: bridge 0000:00:1c.3 64bit mmio pref: [cc000000, cdffffff] PCI: 0000:08:06.0 reg 10 32bit mmio: [fc000000, fc0007ff] pci 0000:08:06.0: supports D1 pci 0000:08:06.0: supports D2 pci 0000:08:06.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:08:06.0: PME# disabled PCI: 0000:08:06.1 reg 10 32bit mmio: [fc000800, fc0008ff] pci 0000:08:06.1: supports D1 pci 0000:08:06.1: supports D2 pci 0000:08:06.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:08:06.1: PME# disabled PCI: 0000:08:06.2 reg 10 32bit mmio: [fc000c00, fc000cff] pci 0000:08:06.2: supports D1 pci 0000:08:06.2: supports D2 pci 0000:08:06.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:08:06.2: PME# disabled PCI: 0000:08:06.3 reg 10 32bit mmio: [fc001000, fc0010ff] pci 0000:08:06.3: supports D1 pci 0000:08:06.3: supports D2 pci 0000:08:06.3: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:08:06.3: PME# disabled pci 0000:00:1e.0: transparent bridge PCI: bridge 0000:00:1e.0 32bit mmio: [fc000000, fc0fffff] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 3.00 loaded. PCI: Using ACPI for IRQ routing system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved system 00:06: ioport range 0x680-0x69f has been reserved system 00:06: ioport range 0x800-0x80f has been reserved system 00:06: ioport range 0x1000-0x107f has been reserved system 00:06: ioport range 0x1180-0x11bf has been reserved system 00:06: ioport range 0xfe00-0xfe00 has been reserved system 00:06: ioport range 0xff00-0xff7f has been reserved pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: disabled pci 0000:00:01.0: MEM window: 0xc9000000-0xcaffffff pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: 0x2000-0x2fff pci 0000:00:1c.0: MEM window: 0xf6000000-0xf7ffffff pci 0000:00:1c.0: PREFETCH window: 0x000000f0000000-0x000000f1ffffff pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.1: IO window: 0x3000-0x3fff pci 0000:00:1c.1: MEM window: 0xf8000000-0xf9ffffff pci 0000:00:1c.1: PREFETCH window: 0x000000f2000000-0x000000f3ffffff pci 0000:00:1c.2: PCI bridge, secondary bus 0000:05 pci 0000:00:1c.2: IO window: 0x4000-0x4fff pci 0000:00:1c.2: MEM window: 0xfa000000-0xfbffffff pci 0000:00:1c.2: PREFETCH window: 0x000000f4000000-0x000000f5ffffff pci 0000:00:1c.3: PCI bridge, secondary bus 0000:06 pci 0000:00:1c.3: IO window: 0x5000-0x5fff pci 0000:00:1c.3: MEM window: 0xc6000000-0xc7ffffff pci 0000:00:1c.3: PREFETCH window: 0x000000cc000000-0x000000cdffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08 pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: 0xfc000000-0xfc0fffff pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffff] bus: 01 index 0 mmio: [0, 0] bus: 01 index 1 mmio: [c9000000, caffffff] bus: 01 index 2 mmio: [d0000000, dfffffff] bus: 01 index 3 mmio: [0, 0] bus: 02 index 0 io port: [2000, 2fff] bus: 02 index 1 mmio: [f6000000, f7ffffff] bus: 02 index 2 mmio: [f0000000, f1ffffff] bus: 02 index 3 mmio: [0, 0] bus: 04 index 0 io port: [3000, 3fff] bus: 04 index 1 mmio: [f8000000, f9ffffff] bus: 04 index 2 mmio: [f2000000, f3ffffff] bus: 04 index 3 mmio: [0, 0] bus: 05 index 0 io port: [4000, 4fff] bus: 05 index 1 mmio: [fa000000, fbffffff] bus: 05 index 2 mmio: [f4000000, f5ffffff] bus: 05 index 3 mmio: [0, 0] bus: 06 index 0 io port: [5000, 5fff] bus: 06 index 1 mmio: [c6000000, c7ffffff] bus: 06 index 2 mmio: [cc000000, cdffffff] bus: 06 index 3 mmio: [0, 0] bus: 08 index 0 mmio: [0, 0] bus: 08 index 1 mmio: [fc000000, fc0fffff] bus: 08 index 2 mmio: [0, 0] bus: 08 index 3 io port: [0, ffff] bus: 08 index 4 mmio: [0, ffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is Freeing initrd memory: 2030k freed Simple Boot Flag at 0x36 set to 0x1 apm: BIOS not found. highmem bounce pool size: 64 pages Installing knfsd (copyright (C) 1996 okir@monad.swb.de). JFS: nTxBlock = 8066, nTxLock = 64533 SGI XFS with security attributes, large block numbers, no debug enabled msgmni has been set to 1763 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:01:00.0: Boot video device pcieport-driver 0000:00:01.0: setting latency timer to 64 pcieport-driver 0000:00:01.0: found MSI capability pci_express 0000:00:01.0:pcie00: allocate port service pci_express 0000:00:01.0:pcie02: allocate port service pci_express 0000:00:01.0:pcie03: allocate port service pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: found MSI capability pci_express 0000:00:1c.0:pcie00: allocate port service pci_express 0000:00:1c.0:pcie02: allocate port service pci_express 0000:00:1c.0:pcie03: allocate port service pcieport-driver 0000:00:1c.1: setting latency timer to 64 pcieport-driver 0000:00:1c.1: found MSI capability pci_express 0000:00:1c.1:pcie00: allocate port service pci_express 0000:00:1c.1:pcie02: allocate port service pci_express 0000:00:1c.1:pcie03: allocate port service pcieport-driver 0000:00:1c.2: setting latency timer to 64 pcieport-driver 0000:00:1c.2: found MSI capability pci_express 0000:00:1c.2:pcie00: allocate port service pci_express 0000:00:1c.2:pcie02: allocate port service pci_express 0000:00:1c.2:pcie03: allocate port service pcieport-driver 0000:00:1c.3: setting latency timer to 64 pcieport-driver 0000:00:1c.3: found MSI capability pci_express 0000:00:1c.3:pcie00: allocate port service pci_express 0000:00:1c.3:pcie02: allocate port service pci_express 0000:00:1c.3:pcie03: allocate port service Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 uvesafb: unrecognized option mtrr uvesafb: NVIDIA Corporation, G72 Board - e463h0v , Chip Rev , OEM: NVIDIA, VBE v3.0 uvesafb: protected mode interface info at c000:c600 uvesafb: pmi: set display start = c00cc636, set palette = c00cc6a0 uvesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da uvesafb: VBIOS/hardware doesn't support DDC transfers uvesafb: no monitor limits have been set, default refresh rate will be used uvesafb: scrolling: ywrap using protected mode interface, yres_virtual=2048 Console: switching to colour frame buffer device 160x64 fbcondecor: console 0 using theme 'livecd-2007.0' fbcondecor: switched decor state to 'on' on console 0 uvesafb: framebuffer at 0xd0000000, mapped to 0xf8d00000, using 10240k, total 262144k fb0: VESA VGA frame buffer device ACPI: AC Adapter [ACAD] (on-line) ACPI: Battery Slot [BAT1] (battery present) input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /class/input/input1 ACPI: Lid Switch [LID0] input: Power Button (CM) as /class/input/input2 ACPI: Power Button (CM) [PWRB] ACPI: SSDT 3FED8B28, 027A (r1 PmRef Cpu0Ist 3000 INTL 20050624) ACPI: SSDT 3FED84B9, 05EA (r1 PmRef Cpu0Cst 3001 INTL 20050624) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI0007:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 3FED8DA2, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624) ACPI: SSDT 3FED8AA3, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI0007:01: registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) Serial: 8250/16550 driver4 ports, IRQ sharing disabled floppy0: no floppy controllers found brd: module loaded loop: module loaded Uniform Multi-Platform E-IDE driver piix 0000:00:1f.1: IDE controller (0x8086:0x2850 rev 0x03) pci 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 piix 0000:00:1f.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x18a0-0x18a7 ide1: BM-DMA at 0x18a8-0x18af Probing IDE interface ide0... hda: HL-DT-ST DVDRAM GMA-4082N, ATAPI CD/DVD-ROM drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/33 mode selected Probing IDE interface ide1... ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 st: Version 20080504, fixed bufsize 32768, s/g segs 256 Driver 'st' needs updating - please use bus_type methods Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods ata_piix 0000:00:1f.2: version 2.12 ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0x18f8 ctl 0x18cc bmdma 0x18e0 irq 19 ata2: SATA max UDMA/133 cmd 0x18f0 ctl 0x18c8 bmdma 0x18e8 irq 19 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: WDC WD1600BEVS-08RST2, 08.01G08, max UDMA/133 ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 ata2: SATA link down (SStatus 0 SControl 0) scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVS-0 08.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input3 cpuidle: using governor ladder Marking TSC unstable due to TSC halts in idle TCP cubic registered NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. Starting balanced_irq Using IPI No-Shortcut mode Freeing unused kernel memory: 288k freed ata1: hard resetting link Clocksource tsc unstable (delta = -343675053 ns) ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: configured for UDMA/133 ata1: EH complete sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Synaptics Touchpad, model: 1, fw: 6.3, id: 0x25c0b1, caps: 0xa04713/0x200000 input: SynPS/2 Synaptics TouchPad as /class/input/input4 NCR53c406a: no available ports found scsi: <fdomain> Detection failed (no card) GDT-HA: Storage RAID Controller Driver. Version: 3.05 NCR53c406a: no available ports found sym53c416.c: Version 1.0.0-ac Adaptec aacraid driver 1.1-5[2456]-ms usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc304000 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc304400 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected usb 1-4: new high speed USB device using ehci_hcd and address 3 usb 1-4: configuration #1 chosen from 1 choice Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. USB Universal Host Controller Interface driver v3.0 uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb 4-1: new full speed USB device using uhci_hcd and address 2 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected usb 4-1: configuration #1 chosen from 1 choice usb 5-1: new low speed USB device using uhci_hcd and address 2 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected usb 5-1: configuration #1 chosen from 1 choice ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver usb 6-2: new full speed USB device using uhci_hcd and address 2 usb 6-2: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev input: USB Optical Mouse as /class/input/input5 input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-1 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver ohci1394 0000:08:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[fc000000-fc0007ff] Max Packet=[2048] IR/IT contexts=[4/4] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 tg3.c:v3.94 (August 14, 2008) tg3 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 tg3 0000:06:00.0: setting latency timer to 64 eth0: Tigon3 [partno(BCM95906) rev c002 PHY(5906)] (PCI Express) 10/100Base-TX Ethernet 00:1b:38:0e:2a:26 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1] eth0: dma_rwctrl[76180000] dma_mask[64-bit] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f81ac4034b0] kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19 ACPI: I/O resource 0000:00:1f.3 [0x1c00-0x1c1f] conflicts with ACPI region SMBI [0x1c00-0x1c0f] ACPI: Device needs an ACPI driver sdhci-pci 0000:08:06.1: SDHCI controller found [1180:0822] (rev 19) sdhci-pci 0000:08:06.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23 Registered led device: mmc0 mmc0: SDHCI controller on PCI [0000:08:06.1] using PIO Linux video capture interface: v2.00 Bluetooth: Core ver 2.13 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: Generic Bluetooth USB driver ver 0.3 usbcore: registered new interface driver btusb iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks iwlagn: Copyright(c) 2003-2008 Intel Corporation iwlagn 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwlagn 0000:04:00.0: setting latency timer to 64 iwlagn: Detected Intel Wireless WiFi Link 4965AGN REV=0x4 iwlagn: Tunable channels: 13 802.11bg, 19 802.11a channels iwlagn 0000:04:00.0: PCI INT A disabled phy0: Selected rate control algorithm 'iwl-agn-rs' uvcvideo: Found UVC 1.00 device USB 2.0 Camera (04f2:b013) input: USB 2.0 Camera as /class/input/input6 usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 Linux agpgart interface v0.103 acpi device:05: registered as cooling_device2 input: Video Bus as /class/input/input7 ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) input: Video Bus as /class/input/input8 ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) nvidia: module license 'NVIDIA' taints kernel. nvidia 0000:01:00.0: power state changed by ACPI to D0 nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 nvidia 0000:01:00.0: setting latency timer to 64 NVRM: loading NVIDIA UNIX x86 Kernel Module 177.80 Wed Oct 1 14:38:10 PDT 2008 EXT3 FS on sda3, internal journal Adding 1992052k swap on /dev/sda2. Priority:-1 extents:1 across:1992052k iwlagn 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwlagn 0000:04:00.0: restoring config space at offset 0x1 (was 0x40100102, writing 0x40100106) firmware: requesting iwlwifi-4965-2.ucode Registered led device: iwl-phy0:radio Registered led device: iwl-phy0:assoc Registered led device: iwl-phy0:RX Registered led device: iwl-phy0:TX fbcondecor: console 1 using theme 'livecd-2007.0' fbcondecor: switched decor state to 'on' on console 1 fbcondecor: console 2 using theme 'livecd-2007.0' fbcondecor: switched decor state to 'on' on console 2 fbcondecor: console 3 using theme 'livecd-2007.0' fbcondecor: switched decor state to 'on' on console 3 fbcondecor: console 4 using theme 'livecd-2007.0' fbcondecor: switched decor state to 'on' on console 4 fbcondecor: console 5 using theme 'livecd-2007.0' fbcondecor: switched decor state to 'on' on console 5 Bluetooth: L2CAP ver 2.11 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.10 Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast wlan0: authenticate with AP 00:1d:7e:bc:3d:bd wlan0: authenticated wlan0: associate with AP 00:1d:7e:bc:3d:bd wlan0: RX AssocResp from 00:1d:7e:bc:3d:bd (capab=0x411 status=0 aid=1) wlan0: associated
I haven' occured any immediately-obvious problems. Maybe just with my suspend2ram that it doesn' work but I don' think if that has anything to do with this error.
| |