lkml.org 
[lkml]   [2008]   [Nov]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: BCM4312 Fails when xdm is started
Date
On Tuesday 25 November 2008 06:43:22 Yuval Hager wrote:
> However, I have some few interesting findings.
> First, this is totally unrelated to b43, but to the PCI. I get the flawed 1's
> read from lspci even without loading b43.
>
> I played around with different video drivers and the results are:
> * If using the 'via' driver, I lose the PCIe card immediately upon
> initialization
> * Using the 'openchrome' (trunk version), It works well in the beginning.
> After first blanking the register reads are all 1's, and then when the screen
> is blank I get a different read (some registers are correct, some are wrong),
> and when the screen is unblanked, I get 0xff's again. Very consistent and
> predictabe (same read every time).
> * Using the 'vesa' driver I could not recreate the problem. I could not get
> the screen to blank for some reason, but closing the lid, going on
> standby/hibernate, restarting X - all didn't matter much to the PCI and the
> wireless card kept on working.

Ok, then you should report the stuff to the X guys. This is not a b43 problem
and I also don't think it's a kernel problem.

--
Greetings Michael.


\
 
 \ /
  Last update: 2008-11-25 12:09    [W:0.077 / U:0.648 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site