lkml.org 
[lkml]   [2008]   [Nov]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 36 of 38] xen: route hardware irqs via Xen
On Thu, Nov 13, 2008 at 11:10:34AM -0800, Jeremy Fitzhardinge wrote:
> This patch puts the hooks into place so that when the interrupt
> subsystem registers an irq, it gets routed via Xen (if we're running
> under Xen).
>
> The first step is to get a gsi for a particular device+pin. We use
> the normal acpi interrupt routing to do the mapping.
>
> Normally the gsi number is used directly as the irq number. We can't
> do that since we also have irqs for non-hardware event channels, and
> so we must share the irq space between them. A given gsi is only
> allocated a single irq, so re-registering a gsi will simply return the
> same irq.
>
> We therefore allocate an irq for a given gsi, and return that. As a
> special case, we reserve the first 16 irqs for identity-mapping legacy
> irqs, since there's a fair amount of code which assumes that.
>
> Having allocated an irq, we ask Xen to allocate a vector, and then
> bind that pirq/vector to an event channel. When the hardware raises
> an interrupt on a vector, Xen signals us on the corresponding event
> channel, which gets routed to the irq and delivered to the appropriate
> device driver.
>
> This patch does everything except set up the IO APIC pin routing to
> the vector.
>
> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
> ---
> arch/x86/kernel/acpi/boot.c | 8 +++
> arch/x86/pci/legacy.c | 4 +
> arch/x86/xen/Makefile | 1
> arch/x86/xen/pci.c | 98 +++++++++++++++++++++++++++++++++++++++++++
> arch/x86/xen/xen-ops.h | 1
> drivers/xen/events.c | 9 ++-
> include/asm-x86/xen/pci.h | 7 +++
> include/xen/events.h | 8 +++
> 8 files changed, 132 insertions(+), 4 deletions(-)
>

[snip]

> diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h
> --- a/arch/x86/xen/xen-ops.h
> +++ b/arch/x86/xen/xen-ops.h
> @@ -63,7 +63,6 @@
> static inline void xen_smp_init(void) {}
> #endif
>
> -
> void xen_init_apic(void);
>
> /* Declare an asm function, along with symbols needed to make it

Hi Jeremy,

This seems like a spurious whitespace change that could be
merged into "[PATCH 30 of 38] xen: implement io_apic_ops"

[snip]

--
Simon Horman
VA Linux Systems Japan K.K., Sydney, Australia Satellite Office
H: www.vergenet.net/~horms/ W: www.valinux.co.jp/en



\
 
 \ /
  Last update: 2008-11-21 11:33    [W:0.181 / U:0.660 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site