lkml.org 
[lkml]   [2008]   [Nov]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH 2/3] ide: make IDE_AFLAG_.. numbering continuous again
Date
From
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
include/linux/ide.h | 48 ++++++++++++++++++++++++------------------------
1 files changed, 24 insertions(+), 24 deletions(-)

diff --git a/include/linux/ide.h b/include/linux/ide.h
index fb81060..efd95e9 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -473,53 +473,53 @@ enum {

/* ide-cd */
/* Drive cannot eject the disc. */
- IDE_AFLAG_NO_EJECT = (1 << 3),
+ IDE_AFLAG_NO_EJECT = (1 << 1),
/* Drive is a pre ATAPI 1.2 drive. */
- IDE_AFLAG_PRE_ATAPI12 = (1 << 4),
+ IDE_AFLAG_PRE_ATAPI12 = (1 << 2),
/* TOC addresses are in BCD. */
- IDE_AFLAG_TOCADDR_AS_BCD = (1 << 5),
+ IDE_AFLAG_TOCADDR_AS_BCD = (1 << 3),
/* TOC track numbers are in BCD. */
- IDE_AFLAG_TOCTRACKS_AS_BCD = (1 << 6),
+ IDE_AFLAG_TOCTRACKS_AS_BCD = (1 << 4),
/*
* Drive does not provide data in multiples of SECTOR_SIZE
* when more than one interrupt is needed.
*/
- IDE_AFLAG_LIMIT_NFRAMES = (1 << 7),
+ IDE_AFLAG_LIMIT_NFRAMES = (1 << 5),
/* Saved TOC information is current. */
- IDE_AFLAG_TOC_VALID = (1 << 9),
+ IDE_AFLAG_TOC_VALID = (1 << 6),
/* We think that the drive door is locked. */
- IDE_AFLAG_DOOR_LOCKED = (1 << 10),
+ IDE_AFLAG_DOOR_LOCKED = (1 << 7),
/* SET_CD_SPEED command is unsupported. */
- IDE_AFLAG_NO_SPEED_SELECT = (1 << 11),
- IDE_AFLAG_VERTOS_300_SSD = (1 << 12),
- IDE_AFLAG_VERTOS_600_ESD = (1 << 13),
- IDE_AFLAG_SANYO_3CD = (1 << 14),
- IDE_AFLAG_FULL_CAPS_PAGE = (1 << 15),
- IDE_AFLAG_PLAY_AUDIO_OK = (1 << 16),
- IDE_AFLAG_LE_SPEED_FIELDS = (1 << 17),
+ IDE_AFLAG_NO_SPEED_SELECT = (1 << 8),
+ IDE_AFLAG_VERTOS_300_SSD = (1 << 9),
+ IDE_AFLAG_VERTOS_600_ESD = (1 << 10),
+ IDE_AFLAG_SANYO_3CD = (1 << 11),
+ IDE_AFLAG_FULL_CAPS_PAGE = (1 << 12),
+ IDE_AFLAG_PLAY_AUDIO_OK = (1 << 13),
+ IDE_AFLAG_LE_SPEED_FIELDS = (1 << 14),

/* ide-floppy */
/* Avoid commands not supported in Clik drive */
- IDE_AFLAG_CLIK_DRIVE = (1 << 19),
+ IDE_AFLAG_CLIK_DRIVE = (1 << 15),
/* Requires BH algorithm for packets */
- IDE_AFLAG_ZIP_DRIVE = (1 << 20),
+ IDE_AFLAG_ZIP_DRIVE = (1 << 16),
/* Supports format progress report */
- IDE_AFLAG_SRFP = (1 << 22),
+ IDE_AFLAG_SRFP = (1 << 17),

/* ide-tape */
- IDE_AFLAG_IGNORE_DSC = (1 << 23),
+ IDE_AFLAG_IGNORE_DSC = (1 << 18),
/* 0 When the tape position is unknown */
- IDE_AFLAG_ADDRESS_VALID = (1 << 24),
+ IDE_AFLAG_ADDRESS_VALID = (1 << 19),
/* Device already opened */
- IDE_AFLAG_BUSY = (1 << 25),
+ IDE_AFLAG_BUSY = (1 << 20),
/* Attempt to auto-detect the current user block size */
- IDE_AFLAG_DETECT_BS = (1 << 26),
+ IDE_AFLAG_DETECT_BS = (1 << 21),
/* Currently on a filemark */
- IDE_AFLAG_FILEMARK = (1 << 27),
+ IDE_AFLAG_FILEMARK = (1 << 22),
/* 0 = no tape is loaded, so we don't rewind after ejecting */
- IDE_AFLAG_MEDIUM_PRESENT = (1 << 28),
+ IDE_AFLAG_MEDIUM_PRESENT = (1 << 23),

- IDE_AFLAG_NO_AUTOCLOSE = (1 << 29),
+ IDE_AFLAG_NO_AUTOCLOSE = (1 << 24),
};

/* device flags */
--
1.6.0.4


\
 
 \ /
  Last update: 2008-11-20 06:49    [W:0.779 / U:0.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site