Messages in this thread | | | From | David Brownell <> | Subject | Re: [PATCH 15/16] Blackfin SPI Driver: fix bug - spi controller driver does not assert/deassert CS correctly | Date | Thu, 20 Nov 2008 12:47:46 -0800 |
| |
On Monday 17 November 2008, Bryan Wu wrote: > From: Yi Li <yi.li@analog.com> > > This bug can be observed when two SPI devices are sharing the spi bus: > One device is set as SPI CS 7, another one is using SPI CS 4. > > In spi_bfin5xx.c: cs_active(), cs_deactive() are used to control SPI_FLG > register. From the debug bellow: > > cs_active: flag: 0x7f91, chip->flag: 0x7f80, cs: 7 > cs_active: flag: 0xef91, chip->flag: 0xef10, cs: 4 > > When device A (cs_7) activate CS 7, SPI_FLG is set as 0x7f91 (however, > SPI_FLG should be set as 0x7f80, or 0x6f91 if in broadcast mode). > > Due to some HW bug (very possibly), if SPI_FLG is set as 0x7f91, > SPISSEL7 is asserted, however SPISSEL4 will be asserted too (I can see > this using the scope). This is unreasonable according to HRM. > > Signed-off-by: Yi Li <yi.li@analog.com> > Signed-off-by: Bryan Wu <cooloney@kernel.org>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Yay! Real patch comments! Although ... it doesn't exactly say *how* it was fixed, which would make the comments better. ("Clear flags that were wrongly left set." maybe.)
Saying what was fixed is at least a start.
> --- > drivers/spi/spi_bfin5xx.c | 5 ++--- > 1 files changed, 2 insertions(+), 3 deletions(-) > > diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c > index 9c602ad..8cf5d6e 100644 > --- a/drivers/spi/spi_bfin5xx.c > +++ b/drivers/spi/spi_bfin5xx.c > @@ -189,6 +189,7 @@ static void cs_deactive(struct driver_data *drv_data, struct chip_data *chip) > { > u16 flag = read_FLAG(drv_data); > > + flag &= ~chip->flag; > flag |= (chip->flag << 8); > > write_FLAG(drv_data, flag); > @@ -1032,7 +1033,6 @@ static int setup(struct spi_device *spi) > struct bfin5xx_spi_chip *chip_info = NULL; > struct chip_data *chip; > struct driver_data *drv_data = spi_master_get_devdata(spi->master); > - u8 spi_flg; > > /* Abort device setup if requested features are not supported */ > if (spi->mode & ~(SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST)) { > @@ -1115,8 +1115,7 @@ static int setup(struct spi_device *spi) > * SPI_BAUD, not the real baudrate > */ > chip->baud = hz_to_spi_baud(spi->max_speed_hz); > - spi_flg = ~(1 << (spi->chip_select)); > - chip->flag = ((u16) spi_flg << 8) | (1 << (spi->chip_select)); > + chip->flag = 1 << (spi->chip_select); > chip->chip_select_num = spi->chip_select; > > switch (chip->bits_per_word) { > -- > 1.5.6.3 > >
| |