lkml.org 
[lkml]   [2008]   [Oct]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 2/4] serial: Allow port type to be specified when calling serial8250_register_port.
Allow port type to be specified when calling serial8250_register_port.

Add flag value UPF_FIXED_TYPE which specifies that the UART type is
known and should not be probed. For this case the UARTs properties
are just copied out of the uart_config entry.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
---
drivers/serial/8250.c | 8 ++++++++
drivers/serial/serial_core.c | 7 +++++--
include/linux/serial_core.h | 2 ++
3 files changed, 15 insertions(+), 2 deletions(-)

diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 02771d6..c575b61 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -2975,6 +2975,14 @@ int serial8250_register_port(struct uart_port *port)
uart->port.private_data = port->private_data;
if (port->dev)
uart->port.dev = port->dev;
+
+ if (port->flags & UPF_FIXED_TYPE) {
+ uart->port.type = port->type;
+ uart->port.fifosize = uart_config[port->type].fifo_size;
+ uart->capabilities = uart_config[port->type].flags;
+ uart->tx_loadsz = uart_config[port->type].tx_loadsz;
+ }
+
set_io_fns_from_upio(&uart->port);
/* Possibly override default I/O functions. */
if (port->serial_in_fn)
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index f977c98..65b8a74 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -2196,11 +2196,14 @@ uart_configure_port(struct uart_driver *drv, struct uart_state *state,
* Now do the auto configuration stuff. Note that config_port
* is expected to claim the resources and map the port for us.
*/
- flags = UART_CONFIG_TYPE;
+ flags = 0;
if (port->flags & UPF_AUTO_IRQ)
flags |= UART_CONFIG_IRQ;
if (port->flags & UPF_BOOT_AUTOCONF) {
- port->type = PORT_UNKNOWN;
+ if (!(port->flags & UPF_FIXED_TYPE)) {
+ port->type = PORT_UNKNOWN;
+ flags |= UART_CONFIG_TYPE;
+ }
port->ops->config_port(port, flags);
}

diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 3a4afcf..c68dc94 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -290,6 +290,8 @@ struct uart_port {
#define UPF_MAGIC_MULTIPLIER ((__force upf_t) (1 << 16))
#define UPF_CONS_FLOW ((__force upf_t) (1 << 23))
#define UPF_SHARE_IRQ ((__force upf_t) (1 << 24))
+/* The exact UART type is known and should not be probed. */
+#define UPF_FIXED_TYPE ((__force upf_t) (1 << 27))
#define UPF_BOOT_AUTOCONF ((__force upf_t) (1 << 28))
#define UPF_FIXED_PORT ((__force upf_t) (1 << 29))
#define UPF_DEAD ((__force upf_t) (1 << 30))

\
 
 \ /
  Last update: 2008-10-08 01:55    [W:0.054 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site