lkml.org 
[lkml]   [2008]   [Oct]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 05/49] Staging: w35und: use msleep() and udelay()
Date
From: Pekka Enberg <penberg@cs.helsinki.fi>

This patch removes the OS_SLEEP() wrapper and changes the call-sites to use
msleep() and udelay() where appropriate.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/staging/winbond/linux/wb35reg.c | 8 ++--
drivers/staging/winbond/linux/wb35rx.c | 4 +-
drivers/staging/winbond/linux/wb35tx.c | 4 +-
drivers/staging/winbond/linux/wbusb_s.h | 4 --
drivers/staging/winbond/phy_calibration.c | 10 ++--
drivers/staging/winbond/reg.c | 66 ++++++++++++++--------------
drivers/staging/winbond/wbhal.c | 2 +-
drivers/staging/winbond/wblinux.c | 4 +-
8 files changed, 49 insertions(+), 53 deletions(-)

diff --git a/drivers/staging/winbond/linux/wb35reg.c b/drivers/staging/winbond/linux/wb35reg.c
index ebb6db5..de4040b 100644
--- a/drivers/staging/winbond/linux/wb35reg.c
+++ b/drivers/staging/winbond/linux/wb35reg.c
@@ -131,7 +131,7 @@ Wb35Reg_WriteSync( phw_data_t pHwData, u16 RegisterNo, u32 RegisterValue )

// 20060717.5 Wait until EP0VM stop
while (pWb35Reg->EP0vm_state != VM_STOP)
- OS_SLEEP(10000);
+ msleep(10);

// Sync IoCallDriver
pWb35Reg->EP0vm_state = VM_RUNNING;
@@ -294,7 +294,7 @@ Wb35Reg_ReadSync( phw_data_t pHwData, u16 RegisterNo, u32 * pRegisterValue )

// 20060717.5 Wait until EP0VM stop
while (pWb35Reg->EP0vm_state != VM_STOP)
- OS_SLEEP(10000);
+ msleep(10);

pWb35Reg->EP0vm_state = VM_RUNNING;
ret = usb_control_msg( pHwData->WbUsb.udev,
@@ -508,9 +508,9 @@ Wb35Reg_destroy(phw_data_t pHwData)

// Wait for Reg operation completed
do {
- OS_SLEEP(10000); // Delay for waiting function enter 940623.1.a
+ msleep(10); // Delay for waiting function enter 940623.1.a
} while (pWb35Reg->EP0vm_state != VM_STOP);
- OS_SLEEP(10000); // Delay for waiting function enter 940623.1.b
+ msleep(10); // Delay for waiting function enter 940623.1.b

// Release all the data in RegQueue
spin_lock_irq( &pWb35Reg->EP0VM_spin_lock );
diff --git a/drivers/staging/winbond/linux/wb35rx.c b/drivers/staging/winbond/linux/wb35rx.c
index b4b9f5f..545c610 100644
--- a/drivers/staging/winbond/linux/wb35rx.c
+++ b/drivers/staging/winbond/linux/wb35rx.c
@@ -191,9 +191,9 @@ void Wb35Rx_destroy(phw_data_t pHwData)
PWB35RX pWb35Rx = &pHwData->Wb35Rx;

do {
- OS_SLEEP(10000); // Delay for waiting function enter 940623.1.a
+ msleep(10); // Delay for waiting function enter 940623.1.a
} while (pWb35Rx->EP3vm_state != VM_STOP);
- OS_SLEEP(10000); // Delay for waiting function exit 940623.1.b
+ msleep(10); // Delay for waiting function exit 940623.1.b

if (pWb35Rx->RxUrb)
usb_free_urb( pWb35Rx->RxUrb );
diff --git a/drivers/staging/winbond/linux/wb35tx.c b/drivers/staging/winbond/linux/wb35tx.c
index ba9d512..6687051 100644
--- a/drivers/staging/winbond/linux/wb35tx.c
+++ b/drivers/staging/winbond/linux/wb35tx.c
@@ -175,9 +175,9 @@ void Wb35Tx_destroy(phw_data_t pHwData)

// Wait for VM stop
do {
- OS_SLEEP(10000); // Delay for waiting function enter 940623.1.a
+ msleep(10); // Delay for waiting function enter 940623.1.a
} while( (pWb35Tx->EP2vm_state != VM_STOP) && (pWb35Tx->EP4vm_state != VM_STOP) );
- OS_SLEEP(10000); // Delay for waiting function enter 940623.1.b
+ msleep(10); // Delay for waiting function enter 940623.1.b

if (pWb35Tx->Tx4Urb)
usb_free_urb( pWb35Tx->Tx4Urb );
diff --git a/drivers/staging/winbond/linux/wbusb_s.h b/drivers/staging/winbond/linux/wbusb_s.h
index d5c1d53..b7fc722 100644
--- a/drivers/staging/winbond/linux/wbusb_s.h
+++ b/drivers/staging/winbond/linux/wbusb_s.h
@@ -11,10 +11,6 @@
//
//+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

-#define OS_SLEEP( _MT ) { set_current_state(TASK_INTERRUPTIBLE); \
- schedule_timeout( _MT*HZ/1000000 ); }
-
-
//---------------------------------------------------------------------------
// RW_CONTEXT --
//
diff --git a/drivers/staging/winbond/phy_calibration.c b/drivers/staging/winbond/phy_calibration.c
index 272a650..76183b2 100644
--- a/drivers/staging/winbond/phy_calibration.c
+++ b/drivers/staging/winbond/phy_calibration.c
@@ -1075,7 +1075,7 @@ void _tx_iq_calibration_winbond(hw_data_t *phw_data)
//; [BB-chip]: Calibration (6h). Caculate TX-path IQ imbalance and setting TX path IQ compensation table
//phy_set_rf_data(phw_data, 3, (3<<24)|0x025586);

- OS_SLEEP(30000); // 20060612.1.a 30ms delay. Add the follow 2 lines
+ msleep(30); // 20060612.1.a 30ms delay. Add the follow 2 lines
//To adjust TXVGA to fit iq_mag_0 range from 1250 ~ 1750
adjust_TXVGA_for_iq_mag( phw_data );

@@ -1698,7 +1698,7 @@ unsigned char adjust_TXVGA_for_iq_mag(hw_data_t *phw_data)
phw_data->txvga_setting_for_cal = current_txvga;

//pa_stall_execution(30000);//Sleep(30);
- OS_SLEEP(30000); // 20060612.1.a
+ msleep(30); // 20060612.1.a

if( !hw_get_dxx_reg(phw_data, REG_MODE_CTRL, &reg_mode_ctrl) ) // 20060718.1 modify
return FALSE;
@@ -1715,10 +1715,10 @@ unsigned char adjust_TXVGA_for_iq_mag(hw_data_t *phw_data)
PHY_DEBUG(("[CAL] MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl));

//pa_stall_execution(US);
- OS_SLEEP(1); // 20060612.1.a
+ udelay(1); // 20060612.1.a

//pa_stall_execution(300);//Sleep(30);
- OS_SLEEP(300); // 20060612.1.a
+ udelay(300); // 20060612.1.a

// b.
hw_get_dxx_reg(phw_data, REG_CALIB_READ1, &val);
@@ -1726,7 +1726,7 @@ unsigned char adjust_TXVGA_for_iq_mag(hw_data_t *phw_data)
PHY_DEBUG(("[CAL] CALIB_READ1 = 0x%08X\n", val));
//pa_stall_execution(US);
//pa_stall_execution(300);//Sleep(30);
- OS_SLEEP(300); // 20060612.1.a
+ udelay(300); // 20060612.1.a

iqcal_tone_i0 = _s13_to_s32(val & 0x00001FFF);
iqcal_tone_q0 = _s13_to_s32((val & 0x03FFE000) >> 13);
diff --git a/drivers/staging/winbond/reg.c b/drivers/staging/winbond/reg.c
index 57af5b8..0d505ac 100644
--- a/drivers/staging/winbond/reg.c
+++ b/drivers/staging/winbond/reg.c
@@ -976,9 +976,9 @@ void Uxx_power_on_procedure( phw_data_t pHwData )

// 20060511.1 Fix the following 4 steps for Rx of RF 2230 initial fail
Wb35Reg_WriteSync( pHwData, 0x03d4, 0x80 );// regulator on only
- OS_SLEEP(10000); // Modify 20051221.1.b
+ msleep(10); // Modify 20051221.1.b
Wb35Reg_WriteSync( pHwData, 0x03d4, 0xb8 );// REG_ON RF_RSTN on, and
- OS_SLEEP(10000); // Modify 20051221.1.b
+ msleep(10); // Modify 20051221.1.b

ltmp = 0x4968;
if( (pHwData->phy_type == RF_WB_242) ||
@@ -988,12 +988,12 @@ void Uxx_power_on_procedure( phw_data_t pHwData )

Wb35Reg_WriteSync( pHwData, 0x03d4, 0xa0 );// PLL_PD REF_PD set to 0

- OS_SLEEP(20000); // Modify 20051221.1.b
+ msleep(20); // Modify 20051221.1.b
Wb35Reg_ReadSync( pHwData, 0x03d0, &ltmp );
loop = 500; // Wait for 5 second 20061101
while( !(ltmp & 0x20) && loop-- )
{
- OS_SLEEP(10000); // Modify 20051221.1.b
+ msleep(10); // Modify 20051221.1.b
if( !Wb35Reg_ReadSync( pHwData, 0x03d0, &ltmp ) )
break;
}
@@ -1002,7 +1002,7 @@ void Uxx_power_on_procedure( phw_data_t pHwData )
}

Wb35Reg_WriteSync( pHwData, 0x03b0, 1 );// Reset hardware first
- OS_SLEEP(10000); // Add this 20051221.1.b
+ msleep(10); // Add this 20051221.1.b

// Set burst write delay
Wb35Reg_WriteSync( pHwData, 0x03f8, 0x7ff );
@@ -1167,23 +1167,23 @@ RFSynthesizer_initial(phw_data_t pHwData)
// 20060511.1 --- Modifying the follow step for Rx issue-----------------
ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse( (0x07<<20)|0xE168E, 20);
Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- OS_SLEEP(10000);
+ msleep(10);
ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse( al2230_rf_data[7], 20);
Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- OS_SLEEP(10000);
+ msleep(10);

case RF_AIROHA_2230S: // 20060420 Add this

// 20060511.1 --- Modifying the follow step for Rx issue-----------------
Wb35Reg_WriteSync( pHwData, 0x03d4, 0x80 );// regulator on only
- OS_SLEEP(10000); // Modify 20051221.1.b
+ msleep(10); // Modify 20051221.1.b

Wb35Reg_WriteSync( pHwData, 0x03d4, 0xa0 );// PLL_PD REF_PD set to 0
- OS_SLEEP(10000); // Modify 20051221.1.b
+ msleep(10); // Modify 20051221.1.b

Wb35Reg_WriteSync( pHwData, 0x03d4, 0xe0 );// MLK_EN
Wb35Reg_WriteSync( pHwData, 0x03b0, 1 );// Reset hardware first
- OS_SLEEP(10000); // Add this 20051221.1.b
+ msleep(10); // Add this 20051221.1.b
//------------------------------------------------------------------------

// The follow code doesn't use the burst-write mode
@@ -1195,17 +1195,17 @@ RFSynthesizer_initial(phw_data_t pHwData)
Wb35Reg_WriteSync( pHwData, 0x105c, ltmp );
pHwData->Wb35Reg.BB50 |= 0x13;//(MASK_IQCAL_MODE|MASK_CALIB_START);//20060315.1 modify
Wb35Reg_WriteSync( pHwData, 0x1050, pHwData->Wb35Reg.BB50);
- OS_SLEEP(5000);
+ msleep(5);

//phy_set_rf_data(phw_data, 0x0F, (0x0F<<20) | 0xF01B0); //Activate Filter Cal.
ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse( (0x0F<<20) | 0xF01B0, 20);
Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- OS_SLEEP(5000);
+ msleep(5);

//phy_set_rf_data(phw_data, 0x0F, (0x0F<<20) | 0xF01e0); //Activate TX DCC
ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse( (0x0F<<20) | 0xF01E0, 20);
Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- OS_SLEEP(5000);
+ msleep(5);

//phy_set_rf_data(phw_data, 0x0F, (0x0F<<20) | 0xF01A0); //Resotre Initial Setting
ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse( (0x0F<<20) | 0xF01A0, 20);
@@ -1229,16 +1229,16 @@ RFSynthesizer_initial(phw_data_t pHwData)
//2.4GHz
//ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x1ABA8F;
//Wb35Reg_WriteSync pHwData, 0x0864, ltmp );
- //OS_SLEEP(1000); // Sleep 1 ms
+ //msleep(1); // Sleep 1 ms
ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x9ABA8F;
Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- OS_SLEEP(5000);
+ msleep(5);
ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x3ABA8F;
Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- OS_SLEEP(5000);
+ msleep(5);
ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x1ABA8F;
Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- OS_SLEEP(5000);
+ msleep(5);

//5GHz
Wb35Reg_WriteSync( pHwData, 0x03dc, 0x00000000 );
@@ -1251,7 +1251,7 @@ RFSynthesizer_initial(phw_data_t pHwData)
// Write to register. number must less and equal than 16
for( i=0; i<number; i++ )
Wb35Reg_WriteSync( pHwData, 0x0864, pltmp[i] );
- OS_SLEEP(5000);
+ msleep(5);

Wb35Reg_WriteSync( pHwData, 0x03dc, 0x00000080 );
#ifdef _PE_STATE_DUMP_
@@ -1262,13 +1262,13 @@ RFSynthesizer_initial(phw_data_t pHwData)
//Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x9ABA8F;
Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- OS_SLEEP(5000);
+ msleep(5);
ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x3ABA8F;
Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- OS_SLEEP(5000);
+ msleep(5);
ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x12BACF;
Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- OS_SLEEP(5000);
+ msleep(5);

//Wb35Reg_WriteSync( pHwData, 0x03dc, 0x00000080 );
//WBDEBUG(("* PLL_ON high\n"));
@@ -1290,11 +1290,11 @@ RFSynthesizer_initial(phw_data_t pHwData)
//Calibration (1a.0). Synthesizer reset (HTHo corrected 2005/05/10)
ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x0F<<24) | 0x00101E, 24);
Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- OS_SLEEP( 5000 ); // Sleep 5ms
+ msleep(5); // Sleep 5ms
//Calibration (1a). VCO frequency calibration mode ; waiting 2msec VCO calibration time
ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFE69c0, 24);
Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- OS_SLEEP( 2000 ); // Sleep 2ms
+ msleep(2); // Sleep 2ms

//----- Calibration (2). TX baseband Gm-C filter auto-tuning
//Calibration (2a). turn off ENCAL signal
@@ -1309,7 +1309,7 @@ RFSynthesizer_initial(phw_data_t pHwData)
//Calibration (2c). turn-on TX Gm-C filter auto-tuning
ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFCEBC0, 24);
Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- OS_SLEEP( 150 ); // Sleep 150 us
+ udelay(150); // Sleep 150 us
//turn off ENCAL signal
ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xF8EBC0, 24);
Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
@@ -1327,7 +1327,7 @@ RFSynthesizer_initial(phw_data_t pHwData)
//Calibration (3c). turn-on RX Gm-C filter auto-tuning
ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFEEDC0, 24);
Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- OS_SLEEP( 150 ); // Sleep 150 us
+ udelay(150); // Sleep 150 us
//Calibration (3e). turn off ENCAL signal
ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFAEDC0, 24);
Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
@@ -1336,7 +1336,7 @@ RFSynthesizer_initial(phw_data_t pHwData)
//Calibration (4a). TX LO leakage calibration
ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFD6BC0, 24);
Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- OS_SLEEP( 150 ); // Sleep 150 us
+ udelay(150); // Sleep 150 us

//----- Calibration (5). RX DC offset calibration
//Calibration (5a). turn off ENCAL signal and set to RX SW DC caliration mode
@@ -1353,7 +1353,7 @@ RFSynthesizer_initial(phw_data_t pHwData)
//Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time
ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFF6DC0, 24);
Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- OS_SLEEP(2000); // Sleep 2ms
+ msleep(2); // Sleep 2ms
//Calibration (5f). turn off ENCAL signal
ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFAEDC0, 24);
Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
@@ -1365,7 +1365,7 @@ RFSynthesizer_initial(phw_data_t pHwData)
//Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time
ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFF6DC0, 24);
Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- OS_SLEEP(2000); // Sleep 2ms
+ msleep(2); // Sleep 2ms
//Calibration (5f). turn off ENCAL signal
ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFAEDC0, 24);
Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
@@ -1377,7 +1377,7 @@ RFSynthesizer_initial(phw_data_t pHwData)
//Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time
ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFF6DC0, 24);
Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- OS_SLEEP(2000); // Sleep 2ms
+ msleep(2); // Sleep 2ms
//Calibration (5f). turn off ENCAL signal
ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFAEDC0, 24);
Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
@@ -1389,7 +1389,7 @@ RFSynthesizer_initial(phw_data_t pHwData)
//Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time
ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFF6DC0, 24);
Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- OS_SLEEP(2000); // Sleep 2ms
+ msleep(2); // Sleep 2ms
//Calibration (5f). turn off ENCAL signal
ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFAEDC0, 24);
Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
@@ -1399,16 +1399,16 @@ RFSynthesizer_initial(phw_data_t pHwData)

//; ----- Calibration (7). Switch RF chip to normal mode
//0x00 0xF86100 ; 3E184 ; Switch RF chip to normal mode
-// OS_SLEEP(10000); // @@ 20060721
+// msleep(10); // @@ 20060721
ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xF86100, 24);
Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- OS_SLEEP(5000); // Sleep 5 ms
+ msleep(5); // Sleep 5 ms

// //write back
// Wb35Reg_WriteSync( pHwData, 0x105c, pHwData->Wb35Reg.BB5C );
// pHwData->Wb35Reg.BB50 &= ~0x13;//(MASK_IQCAL_MODE|MASK_CALIB_START); // 20060315.1 fix
// Wb35Reg_WriteSync( pHwData, 0x1050, pHwData->Wb35Reg.BB50);
-// OS_SLEEP(1000); // Sleep 1 ms
+// msleep(1); // Sleep 1 ms
break;
}
}
diff --git a/drivers/staging/winbond/wbhal.c b/drivers/staging/winbond/wbhal.c
index 5d68ece..1a2533b 100644
--- a/drivers/staging/winbond/wbhal.c
+++ b/drivers/staging/winbond/wbhal.c
@@ -80,7 +80,7 @@ void hal_halt(phw_data_t pHwData, void *ppa_data)
{
case 4:
case 3: OS_TIMER_CANCEL( &pHwData->LEDTimer, &cancel );
- OS_SLEEP(100000); // Wait for Timer DPC exit 940623.2
+ msleep(100); // Wait for Timer DPC exit 940623.2
Wb35Rx_destroy( pHwData ); // Release the Rx
case 2: Wb35Tx_destroy( pHwData ); // Release the Tx
case 1: Wb35Reg_destroy( pHwData ); // Release the Wb35 Regisster resources
diff --git a/drivers/staging/winbond/wblinux.c b/drivers/staging/winbond/wblinux.c
index 4ed45e4..acf5640 100644
--- a/drivers/staging/winbond/wblinux.c
+++ b/drivers/staging/winbond/wblinux.c
@@ -128,7 +128,7 @@ WbWlanHalt( PADAPTER Adapter )
#ifdef _PE_USB_INI_DUMP_
WBDEBUG(("[w35und] Hal_stop O.K.\n"));
#endif
- OS_SLEEP(100000);// Waiting Irp completed
+ msleep(100);// Waiting Irp completed

// Destroy the NDIS module
WBLINUX_Destroy( Adapter );
@@ -238,7 +238,7 @@ WbWLanInitialize(PADAPTER Adapter)

// Waiting for HAL setting OK
while (!hal_idle(pHwData))
- OS_SLEEP(10000);
+ msleep(10);

MTO_Init(Adapter);

--
1.6.0.2


\
 
 \ /
  Last update: 2008-10-29 23:47    [W:0.113 / U:0.244 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site