lkml.org 
[lkml]   [2008]   [Oct]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: Linux 2.6.28-rc2 i/o error on /dev/ttyUSB0
    Alan Cox wrote:
    >> squarely in the "oops, kref's are screwed up" corner, and you should talk
    >> to Alan about your particular USB dongle. I bet that bisection would just
    >> show you one of the kref commits (eg 4a90f09b "tty: usb-serial krefs" or
    >> maybe 7d7b93c14 "tty: kref the tty driver object").
    >
    > Doesn't sound like krefs but does sound like the tty layer changes
    > somewhere.
    >
    > Helge - can you get me an strace of this

    I got "gpsd" out of the way - usually, this one is started
    automatically by hotplug functionality.

    Files attached:
    1. dmesg right after inserting the pl2303, seems ok.
    2. Then,
    strace cat /dev/ttyUSB0 > strace-cat-ttyUSB0
    3. Nothing happened, so I interrupted with ^C. Then:
    strace cat /dev/ttyUSB0 > strace-cat-ttyUSB0-2
    This time I got an i/o error. Nothing in the dmesg log though.
    4. Tried stracing gpsd, to see what happens when it tries
    read-only mode. It failed to open /dev/ttyUSB0, both regular and ro.
    Nothing special in dmesg.
    5. Unplugged and replugged the gps unit. Tried a second strace of gpsd.
    It just failed to open /dev/ttyUSB0.
    6. Another dmesg. Nothing much to see, other than the replugging.

    The kernel warning seems harder to reproduce, but not the malfunctioning.

    Helge Hafting


    execve("/bin/cat", ["cat", "/dev/ttyUSB0"], [/* 25 vars */]) = 0
    brk(0) = 0x242b000
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fe1d5dc2000
    access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
    mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fe1d5dc0000
    access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory)
    open("/etc/ld.so.cache", O_RDONLY) = 3
    fstat(3, {st_mode=S_IFREG|0644, st_size=107139, ...}) = 0
    mmap(NULL, 107139, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7fe1d5da5000
    close(3) = 0
    access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
    open("/lib/libc.so.6", O_RDONLY) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\300\342\1\0\0\0\0\0@"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=1375536, ...}) = 0
    mmap(NULL, 3482232, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fe1d5855000
    mprotect(0x7fe1d599f000, 2093056, PROT_NONE) = 0
    mmap(0x7fe1d5b9e000, 20480, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x149000) = 0x7fe1d5b9e000
    mmap(0x7fe1d5ba3000, 17016, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7fe1d5ba3000
    close(3) = 0
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fe1d5da4000
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fe1d5da3000
    arch_prctl(ARCH_SET_FS, 0x7fe1d5da36e0) = 0
    mprotect(0x7fe1d5b9e000, 12288, PROT_READ) = 0
    munmap(0x7fe1d5da5000, 107139) = 0
    brk(0) = 0x242b000
    brk(0x244c000) = 0x244c000
    open("/usr/lib/locale/locale-archive", O_RDONLY) = 3
    fstat(3, {st_mode=S_IFREG|0644, st_size=1283184, ...}) = 0
    mmap(NULL, 1283184, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7fe1d5c69000
    close(3) = 0
    fstat(1, {st_mode=S_IFCHR|0620, st_rdev=makedev(136, 0), ...}) = 0
    open("/dev/ttyUSB0", O_RDONLY) = 3
    fstat(3, {st_mode=S_IFCHR|0660, st_rdev=makedev(188, 0), ...}) = 0
    read(3, <unfinished ...>
    execve("/bin/cat", ["cat", "/dev/ttyUSB0"], [/* 25 vars */]) = 0
    brk(0) = 0x1acf000
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fcb31815000
    access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
    mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fcb31813000
    access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory)
    open("/etc/ld.so.cache", O_RDONLY) = 3
    fstat(3, {st_mode=S_IFREG|0644, st_size=107139, ...}) = 0
    mmap(NULL, 107139, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7fcb317f8000
    close(3) = 0
    access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
    open("/lib/libc.so.6", O_RDONLY) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\300\342\1\0\0\0\0\0@"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=1375536, ...}) = 0
    mmap(NULL, 3482232, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fcb312a8000
    mprotect(0x7fcb313f2000, 2093056, PROT_NONE) = 0
    mmap(0x7fcb315f1000, 20480, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x149000) = 0x7fcb315f1000
    mmap(0x7fcb315f6000, 17016, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7fcb315f6000
    close(3) = 0
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fcb317f7000
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fcb317f6000
    arch_prctl(ARCH_SET_FS, 0x7fcb317f66e0) = 0
    mprotect(0x7fcb315f1000, 12288, PROT_READ) = 0
    munmap(0x7fcb317f8000, 107139) = 0
    brk(0) = 0x1acf000
    brk(0x1af0000) = 0x1af0000
    open("/usr/lib/locale/locale-archive", O_RDONLY) = 3
    fstat(3, {st_mode=S_IFREG|0644, st_size=1283184, ...}) = 0
    mmap(NULL, 1283184, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7fcb316bc000
    close(3) = 0
    fstat(1, {st_mode=S_IFCHR|0620, st_rdev=makedev(136, 0), ...}) = 0
    open("/dev/ttyUSB0", O_RDONLY) = -1 EIO (Input/output error)
    write(2, "cat: "..., 5cat: ) = 5
    write(2, "/dev/ttyUSB0"..., 12/dev/ttyUSB0) = 12
    open("/usr/share/locale/locale.alias", O_RDONLY) = 3
    fstat(3, {st_mode=S_IFREG|0644, st_size=2586, ...}) = 0
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fcb31812000
    read(3, "# Locale name alias data base.\n# "..., 4096) = 2586
    read(3, ""..., 4096) = 0
    close(3) = 0
    munmap(0x7fcb31812000, 4096) = 0
    open("/usr/share/locale/nb_NO/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
    open("/usr/share/locale/nb/LC_MESSAGES/libc.mo", O_RDONLY) = 3
    fstat(3, {st_mode=S_IFREG|0644, st_size=69070, ...}) = 0
    mmap(NULL, 69070, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7fcb31802000
    close(3) = 0
    open("/usr/lib/gconv/gconv-modules.cache", O_RDONLY) = 3
    fstat(3, {st_mode=S_IFREG|0644, st_size=25700, ...}) = 0
    mmap(NULL, 25700, PROT_READ, MAP_SHARED, 3, 0) = 0x7fcb317fb000
    close(3) = 0
    open("/usr/lib/gconv/ISO8859-1.so", O_RDONLY) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\240\4\0\0\0\0\0\0@"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0644, st_size=10192, ...}) = 0
    mmap(NULL, 2105392, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fcb310a5000
    mprotect(0x7fcb310a7000, 2093056, PROT_NONE) = 0
    mmap(0x7fcb312a6000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1000) = 0x7fcb312a6000
    close(3) = 0
    write(2, ": Inn/ut-feil"..., 13: Inn/ut-feil) = 13
    write(2, "\n"..., 1
    ) = 1
    close(1) = 0
    close(2) = 0
    exit_group(1) = ?
    eg: 2 lose cover RAM: 7M
    gran_size: 8M chunk_size: 128M num_reg: 2 lose cover RAM: 7M
    gran_size: 8M chunk_size: 256M num_reg: 2 lose cover RAM: 7M
    gran_size: 8M chunk_size: 512M num_reg: 2 lose cover RAM: 7M
    gran_size: 8M chunk_size: 1G num_reg: 2 lose cover RAM: 7M
    gran_size: 8M chunk_size: 2G num_reg: 2 lose cover RAM: 7M
    gran_size: 16M chunk_size: 16M num_reg: 7 lose cover RAM: 15M
    gran_size: 16M chunk_size: 32M num_reg: 2 lose cover RAM: 15M
    gran_size: 16M chunk_size: 64M num_reg: 2 lose cover RAM: 15M
    gran_size: 16M chunk_size: 128M num_reg: 2 lose cover RAM: 15M
    gran_size: 16M chunk_size: 256M num_reg: 2 lose cover RAM: 15M
    gran_size: 16M chunk_size: 512M num_reg: 2 lose cover RAM: 15M
    gran_size: 16M chunk_size: 1G num_reg: 2 lose cover RAM: 15M
    gran_size: 16M chunk_size: 2G num_reg: 2 lose cover RAM: 15M
    gran_size: 32M chunk_size: 32M num_reg: 6 lose cover RAM: 31M
    gran_size: 32M chunk_size: 64M num_reg: 2 lose cover RAM: 31M
    gran_size: 32M chunk_size: 128M num_reg: 2 lose cover RAM: 31M
    gran_size: 32M chunk_size: 256M num_reg: 2 lose cover RAM: 31M
    gran_size: 32M chunk_size: 512M num_reg: 2 lose cover RAM: 31M
    gran_size: 32M chunk_size: 1G num_reg: 2 lose cover RAM: 31M
    gran_size: 32M chunk_size: 2G num_reg: 2 lose cover RAM: 31M
    gran_size: 64M chunk_size: 64M num_reg: 5 lose cover RAM: 63M
    gran_size: 64M chunk_size: 128M num_reg: 2 lose cover RAM: 63M
    gran_size: 64M chunk_size: 256M num_reg: 2 lose cover RAM: 63M
    gran_size: 64M chunk_size: 512M num_reg: 2 lose cover RAM: 63M
    gran_size: 64M chunk_size: 1G num_reg: 2 lose cover RAM: 63M
    gran_size: 64M chunk_size: 2G num_reg: 2 lose cover RAM: 63M
    gran_size: 128M chunk_size: 128M num_reg: 4 lose cover RAM: 127M
    gran_size: 128M chunk_size: 256M num_reg: 2 lose cover RAM: 127M
    gran_size: 128M chunk_size: 512M num_reg: 2 lose cover RAM: 127M
    gran_size: 128M chunk_size: 1G num_reg: 2 lose cover RAM: 127M
    gran_size: 128M chunk_size: 2G num_reg: 2 lose cover RAM: 127M
    gran_size: 256M chunk_size: 256M num_reg: 3 lose cover RAM: 255M
    gran_size: 256M chunk_size: 512M num_reg: 2 lose cover RAM: 255M
    gran_size: 256M chunk_size: 1G num_reg: 2 lose cover RAM: 255M
    gran_size: 256M chunk_size: 2G num_reg: 2 lose cover RAM: 255M
    gran_size: 512M chunk_size: 512M num_reg: 2 lose cover RAM: 511M
    gran_size: 512M chunk_size: 1G num_reg: 2 lose cover RAM: 511M
    gran_size: 512M chunk_size: 2G num_reg: 2 lose cover RAM: 511M
    gran_size: 1G chunk_size: 1G num_reg: 1 lose cover RAM: 1023M
    gran_size: 1G chunk_size: 2G num_reg: 1 lose cover RAM: 1023M
    gran_size: 2G chunk_size: 2G num_reg: 0 lose cover RAM: 2047M
    Found optimal setting for mtrr clean up
    gran_size: 64K chunk_size: 2M num_reg: 2 lose RAM: 0G
    range0: 0000000000000000 - 0000000080000000
    Setting variable MTRR 0, base: 0GB, range: 2GB, type WB
    hole: 000000007ff00000 - 0000000080000000
    Setting variable MTRR 1, base: 2047MB, range: 1MB, type UC
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Scanning 2 areas for low memory corruption
    modified physical RAM map:
    modified: 0000000000000000 - 0000000000001000 (usable)
    modified: 0000000000001000 - 0000000000006000 (reserved)
    modified: 0000000000006000 - 0000000000008000 (usable)
    modified: 0000000000008000 - 0000000000010000 (reserved)
    modified: 0000000000010000 - 0000000000092000 (usable)
    modified: 000000000009f000 - 00000000000a0000 (reserved)
    modified: 0000000000100000 - 000000007fe5a800 (usable)
    modified: 000000007fe5a800 - 0000000080000000 (reserved)
    modified: 00000000f8000000 - 00000000fc000000 (reserved)
    modified: 00000000fec00000 - 00000000fec10000 (reserved)
    modified: 00000000fed18000 - 00000000fed1c000 (reserved)
    modified: 00000000fed20000 - 00000000fed90000 (reserved)
    modified: 00000000feda0000 - 00000000feda6000 (reserved)
    modified: 00000000fee00000 - 00000000fee10000 (reserved)
    modified: 00000000ffe00000 - 0000000100000000 (reserved)
    init_memory_mapping
    0000000000 - 007fe00000 page 2M
    007fe00000 - 007fe5a000 page 4k
    kernel direct mapping tables up to 7fe5a000 @ 10000-14000
    last_map_addr: 7fe5a000 end: 7fe5a000
    ACPI: RSDP 000FBB10, 0024 (r2 DELL )
    ACPI: XSDT 7FE5D200, 0064 (r1 DELL M08 27D80715 ASL 61)
    ACPI: FACP 7FE5D09C, 00F4 (r4 DELL M08 27D80715 ASL 61)
    ACPI: DSDT 7FE5D800, 63EA (r2 INT430 SYSFexxx 1001 INTL 20050624)
    ACPI: FACS 7FE6C000, 0040
    ACPI: HPET 7FE5D300, 0038 (r1 DELL M08 1 ASL 61)
    ACPI: APIC 7FE5D400, 0068 (r1 DELL M08 27D80715 ASL 47)
    ACPI: ASF! 7FE5D000, 007E (r32 DELL M08 27D80715 ASL 61)
    ACPI: MCFG 7FE5D3C0, 003E (r16 DELL M08 27D80715 ASL 61)
    ACPI: TCPA 7FE5D700, 0032 (r1 0 ASL 0)
    ACPI: SLIC 7FE5D49C, 0176 (r1 DELL M08 27D80715 ASL 61)
    ACPI: SSDT 7FE5BA02, 04CC (r1 PmRef CpuPm 3000 INTL 20050624)
    ACPI: DMI detected: Dell Latitude D830
    ACPI: Local APIC address 0xfee00000
    (5 early reservations) ==> bootmem [0000000000 - 007fe5a000]
    #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
    #2 [0000200000 - 0000b019f0] TEXT DATA BSS ==> [0000200000 - 0000b019f0]
    #3 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
    #4 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
    [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0
    Zone PFN ranges:
    DMA 0x00000000 -> 0x00001000
    DMA32 0x00001000 -> 0x00100000
    Normal 0x00100000 -> 0x00100000
    Movable zone start PFN for each node
    early_node_map[4] active PFN ranges
    0: 0x00000000 -> 0x00000001
    0: 0x00000006 -> 0x00000008
    0: 0x00000010 -> 0x00000092
    0: 0x00000100 -> 0x0007fe5a
    On node 0 totalpages: 523743
    DMA zone: 56 pages used for memmap
    DMA zone: 2407 pages reserved
    DMA zone: 1510 pages, LIFO batch:0
    DMA32 zone: 7107 pages used for memmap
    DMA32 zone: 512663 pages, LIFO batch:31
    Normal zone: 0 pages used for memmap
    Movable zone: 0 pages used for memmap
    ACPI: PM-Timer IO Port: 0x1008
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    ACPI: HPET id: 0x8086a201 base: 0xfed00000
    Using ACPI (MADT) for SMP configuration information
    SMP: Allowing 2 CPUs, 0 hotplug CPUs
    PM: Registered nosave memory: 0000000000001000 - 0000000000006000
    PM: Registered nosave memory: 0000000000008000 - 0000000000010000
    PM: Registered nosave memory: 0000000000092000 - 000000000009f000
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
    Allocating PCI resources starting at 88000000 (gap: 80000000:78000000)
    PERCPU: Allocating 57344 bytes of per cpu data
    NR_CPUS: 2, nr_cpu_ids: 2, nr_node_ids 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 514173
    Kernel command line: root=/dev/sda2 ro
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 32768 bytes)
    Extended CMOS year: 2000
    TSC: PIT calibration matches PMTIMER. 1 loops
    Detected 1795.493 MHz processor.
    Console: colour VGA+ 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
    Scanning for low memory corruption every 60 seconds
    Checking aperture...
    No AGP bridge found
    Calgary: detecting Calgary via BIOS EBDA area
    Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    Memory: 2053352k/2095464k available (5043k kernel code, 41232k reserved, 2533k data, 516k init)
    SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    hpet clockevent registered
    HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    Calibrating delay loop (skipped), value calculated using timer frequency.. 3592.61 BogoMIPS (lpj=5984976)
    Mount-cache hash table entries: 256
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 2048K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    CPU0: Thermal monitoring enabled (TM2)
    using mwait in idle threads.
    ACPI: Core revision 20080926
    Setting APIC routing to flat
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d
    Booting processor 1 APIC 0x1 ip 0x6000
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 3592.63 BogoMIPS (lpj=5985012)
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 2048K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 1
    CPU1: Thermal monitoring enabled (TM2)
    x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
    CPU1: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d
    checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    Brought up 2 CPUs
    Total of 2 processors activated (7184.24 BogoMIPS).
    CPU0 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 0 1
    CPU1 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 1 0
    net_namespace: 1400 bytes
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
    PCI: MCFG area at f8000000 reserved in E820
    PCI: Using MMCONFIG at f8000000 - fbffffff
    PCI: Using configuration type 1 for base access
    ACPI: EC: Look up EC in DSDT
    ACPI: BIOS _OSI(Linux) query ignored via DMI
    ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
    ACPI Warning (tbutils-0217): Incorrect checksum in table [TCPA] - B3, should be 57 [20080926]
    ACPI: SSDT 7FE6C080, 0043 (r1 LMPWR DELLLOM 1001 INTL 20050624)
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: ACPI Dock Station Driver: 3 docks/bays found
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:01.0: PME# disabled
    pci 0000:00:1a.0: reg 20 io port: [0x6f20-0x6f3f]
    pci 0000:00:1a.1: reg 20 io port: [0x6f00-0x6f1f]
    pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff]
    pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1a.7: PME# disabled
    pci 0000:00:1b.0: reg 10 64bit mmio: [0xf6ffc000-0xf6ffffff]
    pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1b.0: PME# disabled
    pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.0: PME# disabled
    pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.1: PME# disabled
    pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.3: PME# disabled
    pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.5: PME# disabled
    pci 0000:00:1d.0: reg 20 io port: [0x6f80-0x6f9f]
    pci 0000:00:1d.1: reg 20 io port: [0x6f60-0x6f7f]
    pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f]
    pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff]
    pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1d.7: PME# disabled
    pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
    pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO
    pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
    pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
    pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
    pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
    pci 0000:00:1f.1: reg 20 io port: [0x6fa0-0x6faf]
    pci 0000:00:1f.2: reg 10 io port: [0x6eb0-0x6eb7]
    pci 0000:00:1f.2: reg 14 io port: [0x6eb8-0x6ebb]
    pci 0000:00:1f.2: reg 18 io port: [0x6ec0-0x6ec7]
    pci 0000:00:1f.2: reg 1c io port: [0x6ec8-0x6ecb]
    pci 0000:00:1f.2: reg 20 io port: [0x6ee0-0x6eff]
    pci 0000:00:1f.2: reg 24 32bit mmio: [0xf6ffb800-0xf6ffbfff]
    pci 0000:00:1f.2: PME# supported from D3hot
    pci 0000:00:1f.2: PME# disabled
    pci 0000:00:1f.3: reg 10 32bit mmio: [0xf6ffb700-0xf6ffb7ff]
    pci 0000:00:1f.3: reg 20 io port: [0x10c0-0x10df]
    pci 0000:01:00.0: reg 10 32bit mmio: [0xf5000000-0xf5ffffff]
    pci 0000:01:00.0: reg 14 64bit mmio: [0xe0000000-0xefffffff]
    pci 0000:01:00.0: reg 1c 64bit mmio: [0xf2000000-0xf3ffffff]
    pci 0000:01:00.0: reg 24 io port: [0xef00-0xef7f]
    pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
    pci 0000:00:01.0: bridge io port: [0xe000-0xefff]
    pci 0000:00:01.0: bridge 32bit mmio: [0xf2000000-0xf6efffff]
    pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff]
    pci 0000:0c:00.0: reg 10 32bit mmio: [0xf1fff000-0xf1ffffff]
    pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
    pci 0000:0c:00.0: PME# disabled
    pci 0000:00:1c.1: bridge 32bit mmio: [0xf1f00000-0xf1ffffff]
    pci 0000:00:1c.3: bridge io port: [0xd000-0xdfff]
    pci 0000:00:1c.3: bridge 32bit mmio: [0xf1c00000-0xf1efffff]
    pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf0000000-0xf01fffff]
    pci 0000:09:00.0: reg 10 64bit mmio: [0xf1bf0000-0xf1bfffff]
    pci 0000:09:00.0: PME# supported from D3hot D3cold
    pci 0000:09:00.0: PME# disabled
    pci 0000:00:1c.5: bridge 32bit mmio: [0xf1b00000-0xf1bfffff]
    pci 0000:03:01.0: reg 10 32bit mmio: [0x000000-0x000fff]
    pci 0000:03:01.0: supports D1 D2
    pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:03:01.0: PME# disabled
    pci 0000:03:01.4: reg 10 32bit mmio: [0xf1aff000-0xf1afffff]
    pci 0000:03:01.4: reg 14 32bit mmio: [0xf1afe800-0xf1afefff]
    pci 0000:03:01.4: supports D1 D2
    pci 0000:03:01.4: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:03:01.4: PME# disabled
    pci 0000:00:1e.0: transparent bridge
    pci 0000:00:1e.0: bridge 32bit mmio: [0xf1a00000-0xf1afffff]
    bus 00 -> node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *5
    ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *3
    ACPI: PCI Interrupt Link [LNKC] (IRQs 9 *10 11)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *9 10 11)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    ACPI: WMI: Mapper loaded
    SCSI subsystem initialized
    libata version 3.00 loaded.
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    PCI: Using ACPI for IRQ routing
    Bluetooth: Core ver 2.13
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    cfg80211: Using static regulatory domain info
    cfg80211: Regulatory domain: US
    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
    (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
    (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
    (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
    (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
    (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
    cfg80211: Calling CRDA for country: US
    PCI-GART: No AMD northbridge found.
    hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp 00:0b: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
    pnp 00:0b: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
    pnp 00:0c: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
    pnp 00:0c: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
    pnp 00:0c: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
    pnp 00:0c: io resource (0x1010-0x102f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
    pnp: PnP ACPI: found 14 devices
    ACPI: ACPI bus type pnp unregistered
    system 00:05: ioport range 0xc80-0xcaf has been reserved
    system 00:05: ioport range 0xcc0-0xcff could not be reserved
    system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved
    system 00:0b: ioport range 0x900-0x97f has been reserved
    system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
    system 00:0c: ioport range 0xf400-0xf4fe has been reserved
    system 00:0c: ioport range 0x1080-0x10bf has been reserved
    system 00:0c: ioport range 0x10c0-0x10df has been reserved
    system 00:0c: ioport range 0x809-0x809 has been reserved
    system 00:0d: iomem range 0x0-0x9efff could not be reserved
    system 00:0d: iomem range 0x9f000-0x9ffff could not be reserved
    system 00:0d: iomem range 0xc0000-0xcffff has been reserved
    system 00:0d: iomem range 0xe0000-0xfffff has been reserved
    system 00:0d: iomem range 0x100000-0x7fe5a7ff could not be reserved
    system 00:0d: iomem range 0x7fe5a800-0x7fefffff could not be reserved
    system 00:0d: iomem range 0x7ff00000-0x7fffffff could not be reserved
    system 00:0d: iomem range 0x7ff00000-0x806fffff could not be reserved
    system 00:0d: iomem range 0xffe00000-0xffffffff could not be reserved
    system 00:0d: iomem range 0xffa00000-0xffbfffff has been reserved
    system 00:0d: iomem range 0xfec00000-0xfec0ffff could not be reserved
    system 00:0d: iomem range 0xfee00000-0xfee0ffff could not be reserved
    system 00:0d: iomem range 0xfed20000-0xfed3ffff could not be reserved
    system 00:0d: iomem range 0xfed45000-0xfed8ffff could not be reserved
    system 00:0d: iomem range 0xfeda0000-0xfeda3fff could not be reserved
    system 00:0d: iomem range 0xfeda4000-0xfeda4fff could not be reserved
    system 00:0d: iomem range 0xfeda5000-0xfeda5fff could not be reserved
    system 00:0d: iomem range 0xfeda6000-0xfeda6fff has been reserved
    system 00:0d: iomem range 0xfed18000-0xfed1bfff could not be reserved
    system 00:0d: iomem range 0xf8000000-0xfbffffff could not be reserved
    pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
    pci 0000:00:01.0: IO window: 0xe000-0xefff
    pci 0000:00:01.0: MEM window: 0xf2000000-0xf6efffff
    pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff
    pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b
    pci 0000:00:1c.0: IO window: disabled
    pci 0000:00:1c.0: MEM window: disabled
    pci 0000:00:1c.0: PREFETCH window: disabled
    pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c
    pci 0000:00:1c.1: IO window: disabled
    pci 0000:00:1c.1: MEM window: 0xf1f00000-0xf1ffffff
    pci 0000:00:1c.1: PREFETCH window: disabled
    pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0d
    pci 0000:00:1c.3: IO window: 0xd000-0xdfff
    pci 0000:00:1c.3: MEM window: 0xf1c00000-0xf1efffff
    pci 0000:00:1c.3: PREFETCH window: 0x000000f0000000-0x000000f01fffff
    pci 0000:00:1c.5: PCI bridge, secondary bus 0000:09
    pci 0000:00:1c.5: IO window: disabled
    pci 0000:00:1c.5: MEM window: 0xf1b00000-0xf1bfffff
    pci 0000:00:1c.5: PREFETCH window: disabled
    pci 0000:03:01.0: CardBus bridge, secondary bus 0000:04
    pci 0000:03:01.0: IO window: 0x002000-0x0020ff
    pci 0000:03:01.0: IO window: 0x002400-0x0024ff
    pci 0000:03:01.0: PREFETCH window: 0x88000000-0x8bffffff
    pci 0000:03:01.0: MEM window: 0x8c000000-0x8fffffff
    pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
    pci 0000:00:1e.0: IO window: 0x2000-0x2fff
    pci 0000:00:1e.0: MEM window: 0xf1a00000-0xf1afffff
    pci 0000:00:1e.0: PREFETCH window: 0x00000088000000-0x0000008bffffff
    pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pci 0000:00:01.0: setting latency timer to 64
    pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pci 0000:00:1c.0: setting latency timer to 64
    pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    pci 0000:00:1c.1: setting latency timer to 64
    pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    pci 0000:00:1c.3: setting latency timer to 64
    pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    pci 0000:00:1c.5: setting latency timer to 64
    pci 0000:00:1e.0: setting latency timer to 64
    pci 0000:03:01.0: enabling device (0000 -> 0003)
    pci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    bus: 00 index 0 io port: [0x00-0xffff]
    bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
    bus: 01 index 0 io port: [0xe000-0xefff]
    bus: 01 index 1 mmio: [0xf2000000-0xf6efffff]
    bus: 01 index 2 mmio: [0xe0000000-0xefffffff]
    bus: 01 index 3 mmio: [0x0-0x0]
    bus: 0b index 0 mmio: [0x0-0x0]
    bus: 0b index 1 mmio: [0x0-0x0]
    bus: 0b index 2 mmio: [0x0-0x0]
    bus: 0b index 3 mmio: [0x0-0x0]
    bus: 0c index 0 mmio: [0x0-0x0]
    bus: 0c index 1 mmio: [0xf1f00000-0xf1ffffff]
    bus: 0c index 2 mmio: [0x0-0x0]
    bus: 0c index 3 mmio: [0x0-0x0]
    bus: 0d index 0 io port: [0xd000-0xdfff]
    bus: 0d index 1 mmio: [0xf1c00000-0xf1efffff]
    bus: 0d index 2 mmio: [0xf0000000-0xf01fffff]
    bus: 0d index 3 mmio: [0x0-0x0]
    bus: 09 index 0 mmio: [0x0-0x0]
    bus: 09 index 1 mmio: [0xf1b00000-0xf1bfffff]
    bus: 09 index 2 mmio: [0x0-0x0]
    bus: 09 index 3 mmio: [0x0-0x0]
    bus: 03 index 0 io port: [0x2000-0x2fff]
    bus: 03 index 1 mmio: [0xf1a00000-0xf1afffff]
    bus: 03 index 2 mmio: [0x88000000-0x8bffffff]
    bus: 03 index 3 io port: [0x00-0xffff]
    bus: 03 index 4 mmio: [0x000000-0xffffffffffffffff]
    bus: 04 index 0 io port: [0x2000-0x20ff]
    bus: 04 index 1 io port: [0x2400-0x24ff]
    bus: 04 index 2 mmio: [0x88000000-0x8bffffff]
    bus: 04 index 3 mmio: [0x8c000000-0x8fffffff]
    NET: Registered protocol family 2
    Switched to high resolution mode on CPU 1
    Switched to high resolution mode on CPU 0
    IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
    TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
    TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    TCP: Hash tables configured (established 262144 bind 65536)
    TCP reno registered
    NET: Registered protocol family 1
    Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk> <peter.oruba@amd.com>
    audit: initializing netlink socket (disabled)
    type=2000 audit(1225272931.524:1): initialized
    HugeTLB registered 2 MB page size, pre-allocated 0 pages
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    fuse init (API version 7.10)
    msgmni has been set to 4011
    alg: No test for stdrng (krng)
    alg: No test for stdrng (ansi_cprng)
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0080
    pci 0000:00:1a.0: Performing full reset
    pci 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0080
    pci 0000:00:1a.1: Performing full reset
    pci 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0080
    pci 0000:00:1d.0: Performing full reset
    pci 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0080
    pci 0000:00:1d.1: Performing full reset
    pci 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0080
    pci 0000:00:1d.2: Performing full reset
    pci 0000:01:00.0: Boot video device
    pcieport-driver 0000:00:01.0: setting latency timer to 64
    pcieport-driver 0000:00:01.0: found MSI capability
    pcieport-driver 0000:00:01.0: irq 319 for MSI/MSI-X
    pci_express 0000:00:01.0:pcie00: allocate port service
    pci_express 0000:00:01.0:pcie02: allocate port service
    pci_express 0000:00:01.0:pcie03: allocate port service
    pcieport-driver 0000:00:1c.0: setting latency timer to 64
    pcieport-driver 0000:00:1c.0: found MSI capability
    pcieport-driver 0000:00:1c.0: irq 318 for MSI/MSI-X
    pci_express 0000:00:1c.0:pcie00: allocate port service
    pci_express 0000:00:1c.0:pcie02: allocate port service
    pci_express 0000:00:1c.0:pcie03: allocate port service
    pcieport-driver 0000:00:1c.1: setting latency timer to 64
    pcieport-driver 0000:00:1c.1: found MSI capability
    pcieport-driver 0000:00:1c.1: irq 317 for MSI/MSI-X
    pci_express 0000:00:1c.1:pcie00: allocate port service
    pci_express 0000:00:1c.1:pcie02: allocate port service
    pci_express 0000:00:1c.1:pcie03: allocate port service
    pcieport-driver 0000:00:1c.3: setting latency timer to 64
    pcieport-driver 0000:00:1c.3: found MSI capability
    pcieport-driver 0000:00:1c.3: irq 316 for MSI/MSI-X
    pci_express 0000:00:1c.3:pcie00: allocate port service
    pci_express 0000:00:1c.3:pcie02: allocate port service
    pci_express 0000:00:1c.3:pcie03: allocate port service
    pcieport-driver 0000:00:1c.5: setting latency timer to 64
    pcieport-driver 0000:00:1c.5: found MSI capability
    pcieport-driver 0000:00:1c.5: irq 315 for MSI/MSI-X
    pci_express 0000:00:1c.5:pcie00: allocate port service
    pci_express 0000:00:1c.5:pcie02: allocate port service
    pci_express 0000:00:1c.5:pcie03: allocate port service
    nvidiafb 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    nvidiafb: Device ID: 10de042b
    nvidiafb: unknown NV_ARCH
    ACPI: AC Adapter [AC] (on-line)
    ACPI Warning (nspredef-0858): \_SB_.BAT0._BIF: Return Package type mismatch at index 9 - found Buffer, expected String [20080926]
    ACPI: Battery Slot [BAT0] (battery present)
    ACPI: Battery Slot [BAT1] (battery absent)
    input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
    ACPI: Lid Switch [LID]
    input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
    ACPI: Power Button (CM) [PBTN]
    input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
    ACPI: Sleep Button (CM) [SBTN]
    input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:31/device:32/input/input3
    ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
    input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:37/input/input4
    ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
    ACPI Warning (nspredef-0357): \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) [20080926]
    input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:3c/input/input5
    ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
    ACPI: SSDT 7FE5C538, 0244 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
    ACPI: SSDT 7FE5BECE, 05E5 (r1 PmRef Cpu0Cst 3001 INTL 20050624)
    Monitor-Mwait will be used to enter C-1 state
    Monitor-Mwait will be used to enter C-2 state
    Monitor-Mwait will be used to enter C-3 state
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    processor ACPI0007:00: registered as cooling_device0
    ACPI: Processor [CPU0] (supports 8 throttling states)
    ACPI: SSDT 7FE5C77C, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
    ACPI: SSDT 7FE5C4B3, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
    ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
    processor ACPI0007:01: registered as cooling_device1
    ACPI: Processor [CPU1] (supports 8 throttling states)
    thermal LNXTHERM:01: registered as thermal_zone0
    ACPI: Thermal Zone [THM] (25 C)
    i8k: unable to get SMM BIOS version
    Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal Zotto (dz@debian.org)
    Linux agpgart interface v0.103
    ipmi message handler version 39.2
    Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
    Hangcheck: Using get_cycles().
    Serial: 8250/16550 driver4 ports, IRQ sharing enabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    brd: module loaded
    loop: module loaded
    Ethernet Channel Bonding Driver: v3.3.0 (June 10, 2008)
    bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details.
    tg3.c:v3.94 (August 14, 2008)
    tg3 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    tg3 0000:09:00.0: setting latency timer to 64
    eth0: Tigon3 [partno(BCM95755m) rev a002 PHY(5755)] (PCI Express) 10/100/1000Base-T Ethernet 00:1c:23:9f:6f:17
    eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
    eth0: dma_rwctrl[76180000] dma_mask[64-bit]
    PPP generic driver version 2.4.2
    PPP Deflate Compression module registered
    PPP BSD Compression module registered
    PPP MPPE Compression module registered
    NET: Registered protocol family 24
    PPPoL2TP kernel driver, V1.0
    SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
    CSLIP: code copyright 1989 Regents of the University of California.
    SLIP linefill/keepalive option.
    tun: Universal TUN/TAP device driver, 1.6
    tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
    iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26kds
    iwl3945: Copyright(c) 2003-2008 Intel Corporation
    iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    iwl3945 0000:0c:00.0: setting latency timer to 64
    iwl3945: Detected Intel Wireless WiFi Link 3945ABG
    iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
    phy0: Selected rate control algorithm 'iwl-3945-rs'
    iwl3945 0000:0c:00.0: PCI INT A disabled
    console [netcon0] enabled
    netconsole: network logging started
    Linux video capture interface: v2.00
    Uniform Multi-Platform E-IDE driver
    piix 0000:00:1f.1: IDE controller (0x8086:0x2850 rev 0x02)
    pci 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    piix 0000:00:1f.1: IDE port disabled
    piix 0000:00:1f.1: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x6fa0-0x6fa7
    Probing IDE interface ide0...
    hda: TSSTcorp DVD+/-RW TS-L632D, ATAPI CD/DVD-ROM drive
    hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
    hda: UDMA/33 mode selected
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
    ide-gd driver 1.18
    ide-cd driver 5.00
    ide-cd: hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
    Uniform CD-ROM driver Revision: 3.20
    Driver 'sd' needs updating - please use bus_type methods
    Driver 'sr' needs updating - please use bus_type methods
    ahci 0000:00:1f.2: version 3.0
    ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    ahci 0000:00:1f.2: irq 314 for MSI/MSI-X
    ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode
    ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems
    ahci 0000:00:1f.2: setting latency timer to 64
    scsi0 : ahci
    scsi1 : ahci
    scsi2 : ahci
    ata1: SATA max UDMA/133 abar m2048@0xf6ffb800 port 0xf6ffb900 irq 314
    ata2: DUMMY
    ata3: SATA max UDMA/133 abar m2048@0xf6ffb800 port 0xf6ffba00 irq 314
    ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    ata1.00: ATA-8: Hitachi HTS722080K9A300, DCBOC54P, max UDMA/133
    ata1.00: 156301488 sectors, multi 8: LBA48 NCQ (depth 31/32)
    ata1.00: configured for UDMA/133
    ata3: SATA link down (SStatus 0 SControl 300)
    scsi 0:0:0:0: Direct-Access ATA Hitachi HTS72208 DCBO PQ: 0 ANSI: 5
    sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 >
    sd 0:0:0:0: [sda] Attached SCSI disk
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    firewire_ohci 0000:03:01.4: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    firewire_ohci: Added fw-ohci device 0000:03:01.4, OHCI version 1.10
    yenta_cardbus 0000:03:01.0: CardBus bridge found [1028:01fe]
    yenta_cardbus 0000:03:01.0: O2: res at 0x94/0xD4: 00/ea
    yenta_cardbus 0000:03:01.0: O2: enabling read prefetch/write burst
    yenta_cardbus 0000:03:01.0: ISA IRQ mask 0x0cb8, PCI irq 19
    yenta_cardbus 0000:03:01.0: Socket status: 30000006
    pci_bus 0000:03: Raising subordinate bus# of parent bus (#03) from #04 to #07
    yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
    yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge Memory window: 0xf1a00000 - 0xf1afffff
    yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96
    ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
    ehci_hcd 0000:00:1a.7: setting latency timer to 64
    ehci_hcd 0000:00:1a.7: EHCI Host Controller
    drivers/usb/core/inode.c: creating file 'devices'
    drivers/usb/core/inode.c: creating file '001'
    ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:1a.7: reset hcs_params 0x102204 dbg=1 cc=2 pcc=2 ordered !ppc ports=4
    ehci_hcd 0000:00:1a.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
    ehci_hcd 0000:00:1a.7: reset command 000002 (park)=0 ithresh=0 period=1024 Reset HALT
    ehci_hcd 0000:00:1a.7: debug port 1
    ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
    ehci_hcd 0000:00:1a.7: supports USB remote wakeup
    ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
    ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
    ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
    ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    usb usb1: default language 0x0409
    usb usb1: uevent
    usb usb1: usb_probe_device
    usb usb1: configuration #1 chosen from 1 choice
    usb usb1: adding 1-0:1.0 (config #1, interface 0)
    usb 1-0:1.0: uevent
    hub 1-0:1.0: usb_probe_interface
    hub 1-0:1.0: usb_probe_interface - got id
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 4 ports detected
    hub 1-0:1.0: standalone hub
    hub 1-0:1.0: no power switching (usb 1.0)
    hub 1-0:1.0: individual port over-current protection
    hub 1-0:1.0: power on to power good time: 20ms
    hub 1-0:1.0: local power source is good
    hub 1-0:1.0: trying to enable port power on non-switchable hub
    drivers/usb/core/inode.c: creating file '001'
    usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb1: Product: EHCI Host Controller
    usb usb1: Manufacturer: Linux 2.6.28-rc2-hh1 ehci_hcd
    usb usb1: SerialNumber: 0000:00:1a.7
    ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    ehci_hcd 0000:00:1d.7: setting latency timer to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    drivers/usb/core/inode.c: creating file '002'
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
    ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
    ehci_hcd 0000:00:1d.7: reset command 000002 (park)=0 ithresh=0 period=1024 Reset HALT
    ehci_hcd 0000:00:1d.7: debug port 1
    ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    ehci_hcd 0000:00:1d.7: supports USB remote wakeup
    ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
    ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
    ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    usb usb2: default language 0x0409
    usb usb2: uevent
    usb usb2: usb_probe_device
    usb usb2: configuration #1 chosen from 1 choice
    usb usb2: adding 2-0:1.0 (config #1, interface 0)
    usb 2-0:1.0: uevent
    hub 2-0:1.0: usb_probe_interface
    hub 2-0:1.0: usb_probe_interface - got id
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 6 ports detected
    hub 2-0:1.0: standalone hub
    hub 2-0:1.0: no power switching (usb 1.0)
    hub 2-0:1.0: individual port over-current protection
    hub 2-0:1.0: power on to power good time: 20ms
    hub 2-0:1.0: local power source is good
    hub 2-0:1.0: trying to enable port power on non-switchable hub
    drivers/usb/core/inode.c: creating file '001'
    usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
    usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb2: Product: EHCI Host Controller
    usb usb2: Manufacturer: Linux 2.6.28-rc2-hh1 ehci_hcd
    usb usb2: SerialNumber: 0000:00:1d.7
    uhci_hcd: USB Universal Host Controller Interface driver
    uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    uhci_hcd 0000:00:1a.0: setting latency timer to 64
    uhci_hcd 0000:00:1a.0: UHCI Host Controller
    drivers/usb/core/inode.c: creating file '003'
    uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1a.0: detected 2 ports
    uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
    uhci_hcd 0000:00:1a.0: Performing full reset
    uhci_hcd 0000:00:1a.0: supports USB remote wakeup
    uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
    usb usb3: default language 0x0409
    usb usb3: uevent
    usb usb3: usb_probe_device
    usb usb3: configuration #1 chosen from 1 choice
    usb usb3: adding 3-0:1.0 (config #1, interface 0)
    usb 3-0:1.0: uevent
    hub 3-0:1.0: usb_probe_interface
    hub 3-0:1.0: usb_probe_interface - got id
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    hub 3-0:1.0: standalone hub
    hub 3-0:1.0: no power switching (usb 1.0)
    hub 3-0:1.0: individual port over-current protection
    hub 3-0:1.0: power on to power good time: 2ms
    hub 3-0:1.0: local power source is good
    hub 3-0:1.0: trying to enable port power on non-switchable hub
    drivers/usb/core/inode.c: creating file '001'
    usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb3: Product: UHCI Host Controller
    usb usb3: Manufacturer: Linux 2.6.28-rc2-hh1 uhci_hcd
    usb usb3: SerialNumber: 0000:00:1a.0
    uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    uhci_hcd 0000:00:1a.1: setting latency timer to 64
    uhci_hcd 0000:00:1a.1: UHCI Host Controller
    drivers/usb/core/inode.c: creating file '004'
    uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1a.1: detected 2 ports
    uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
    uhci_hcd 0000:00:1a.1: Performing full reset
    uhci_hcd 0000:00:1a.1: supports USB remote wakeup
    uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
    usb usb4: default language 0x0409
    usb usb4: uevent
    usb usb4: usb_probe_device
    usb usb4: configuration #1 chosen from 1 choice
    usb usb4: adding 4-0:1.0 (config #1, interface 0)
    usb 4-0:1.0: uevent
    hub 4-0:1.0: usb_probe_interface
    hub 4-0:1.0: usb_probe_interface - got id
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    hub 4-0:1.0: standalone hub
    hub 4-0:1.0: no power switching (usb 1.0)
    hub 4-0:1.0: individual port over-current protection
    hub 4-0:1.0: power on to power good time: 2ms
    hub 4-0:1.0: local power source is good
    hub 4-0:1.0: trying to enable port power on non-switchable hub
    drivers/usb/core/inode.c: creating file '001'
    usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb4: Product: UHCI Host Controller
    usb usb4: Manufacturer: Linux 2.6.28-rc2-hh1 uhci_hcd
    usb usb4: SerialNumber: 0000:00:1a.1
    uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    uhci_hcd 0000:00:1d.0: setting latency timer to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    drivers/usb/core/inode.c: creating file '005'
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:1d.0: detected 2 ports
    uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
    uhci_hcd 0000:00:1d.0: Performing full reset
    uhci_hcd 0000:00:1d.0: supports USB remote wakeup
    uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
    usb usb5: default language 0x0409
    usb usb5: uevent
    usb usb5: usb_probe_device
    usb usb5: configuration #1 chosen from 1 choice
    usb usb5: adding 5-0:1.0 (config #1, interface 0)
    usb 5-0:1.0: uevent
    hub 5-0:1.0: usb_probe_interface
    hub 5-0:1.0: usb_probe_interface - got id
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    hub 5-0:1.0: standalone hub
    hub 5-0:1.0: no power switching (usb 1.0)
    hub 5-0:1.0: individual port over-current protection
    hub 5-0:1.0: power on to power good time: 2ms
    hub 5-0:1.0: local power source is good
    hub 5-0:1.0: trying to enable port power on non-switchable hub
    drivers/usb/core/inode.c: creating file '001'
    usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb5: Product: UHCI Host Controller
    usb usb5: Manufacturer: Linux 2.6.28-rc2-hh1 uhci_hcd
    usb usb5: SerialNumber: 0000:00:1d.0
    uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    uhci_hcd 0000:00:1d.1: setting latency timer to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    drivers/usb/core/inode.c: creating file '006'
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
    uhci_hcd 0000:00:1d.1: detected 2 ports
    uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
    uhci_hcd 0000:00:1d.1: Performing full reset
    uhci_hcd 0000:00:1d.1: supports USB remote wakeup
    uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
    usb usb6: default language 0x0409
    usb usb6: uevent
    usb usb6: usb_probe_device
    usb usb6: configuration #1 chosen from 1 choice
    usb usb6: adding 6-0:1.0 (config #1, interface 0)
    usb 6-0:1.0: uevent
    hub 6-0:1.0: usb_probe_interface
    hub 6-0:1.0: usb_probe_interface - got id
    hub 6-0:1.0: USB hub found
    hub 6-0:1.0: 2 ports detected
    hub 6-0:1.0: standalone hub
    hub 6-0:1.0: no power switching (usb 1.0)
    hub 6-0:1.0: individual port over-current protection
    hub 6-0:1.0: power on to power good time: 2ms
    hub 6-0:1.0: local power source is good
    hub 6-0:1.0: trying to enable port power on non-switchable hub
    drivers/usb/core/inode.c: creating file '001'
    usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb6: Product: UHCI Host Controller
    usb usb6: Manufacturer: Linux 2.6.28-rc2-hh1 uhci_hcd
    usb usb6: SerialNumber: 0000:00:1d.1
    uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
    uhci_hcd 0000:00:1d.2: setting latency timer to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    drivers/usb/core/inode.c: creating file '007'
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
    uhci_hcd 0000:00:1d.2: detected 2 ports
    uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
    uhci_hcd 0000:00:1d.2: Performing full reset
    uhci_hcd 0000:00:1d.2: supports USB remote wakeup
    uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
    usb usb7: default language 0x0409
    usb usb7: uevent
    usb usb7: usb_probe_device
    usb usb7: configuration #1 chosen from 1 choice
    usb usb7: adding 7-0:1.0 (config #1, interface 0)
    usb 7-0:1.0: uevent
    hub 7-0:1.0: usb_probe_interface
    hub 7-0:1.0: usb_probe_interface - got id
    hub 7-0:1.0: USB hub found
    hub 7-0:1.0: 2 ports detected
    hub 7-0:1.0: standalone hub
    hub 7-0:1.0: no power switching (usb 1.0)
    hub 7-0:1.0: individual port over-current protection
    hub 7-0:1.0: power on to power good time: 2ms
    hub 7-0:1.0: local power source is good
    hub 7-0:1.0: trying to enable port power on non-switchable hub
    drivers/usb/core/inode.c: creating file '001'
    usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb7: Product: UHCI Host Controller
    usb usb7: Manufacturer: Linux 2.6.28-rc2-hh1 uhci_hcd
    usb usb7: SerialNumber: 0000:00:1d.2
    usbcore: registered new interface driver wusb-cbaf
    usbcore: registered new interface driver usblp
    Initializing USB Mass Storage driver...
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    rtc_cmos 00:03: RTC can wake from S4
    rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k, 114 bytes nvram, , hpet irqs irqs
    i2c /dev entries driver
    i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
    iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
    iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    cpuidle: using governor ladder
    cpuidle: using governor menu
    Marking TSC unstable due to TSC halts in idle
    dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
    Driver for HIFN 795x crypto accelerator chip has been successfully registered.
    dca service started, version 1.4
    input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input6
    usbcore: registered new interface driver hiddev
    usbcore: registered new interface driver usbhid
    usbhid: v2.6:USB HID core driver
    Advanced Linux Sound Architecture Driver Version 1.0.18rc3.
    HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
    HDA Intel 0000:00:1b.0: setting latency timer to 64
    ehci_hcd 0000:00:1a.7: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT
    hub 1-0:1.0: port 2: status 0501 change 0001
    ehci_hcd 0000:00:1d.7: GetStatus port 5 status 001803 POWER sig=j CSC CONNECT
    hub 2-0:1.0: port 5: status 0501 change 0001
    uhci_hcd 0000:00:1a.0: port 2 portsc 008a,00
    hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
    hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
    uhci_hcd 0000:00:1d.2: port 1 portsc 008a,00
    hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
    hub 2-0:1.0: state 7 ports 6 chg 0020 evt 0000
    hub 2-0:1.0: port 5, status 0501, change 0000, 480 Mb/s
    ehci_hcd 0000:00:1d.7: port 5 full speed --> companion
    ehci_hcd 0000:00:1d.7: GetStatus port 5 status 003801 POWER OWNER sig=j CONNECT
    hub 2-0:1.0: port 5 not reset yet, waiting 50ms
    ALSA device list:
    #0: HDA Intel at 0xf6ffc000 irq 21
    NET: Registered protocol family 26
    Netfilter messages via NETLINK v0.30.
    nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
    CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
    nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
    sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
    ctnetlink v0.93: registering with nfnetlink.
    IPv4 over IPv4 tunneling driver
    GRE over IPv4 tunneling driver
    TCP bic registered
    TCP westwood registered
    Initializing XFRM netlink socket
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    tunl0: Disabled Privacy Extensions
    NET: Registered protocol family 17
    NET: Registered protocol family 15
    Bridge firewalling registered
    Ebtables v2.0 registered
    NET: Registered protocol family 35
    802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
    All bugs added by David S. Miller <davem@redhat.com>
    ehci_hcd 0000:00:1d.7: GetStatus port 5 status 003002 POWER OWNER sig=se0 CSC
    hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
    hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
    hub 1-0:1.0: state 7 ports 4 chg 0004 evt 0000
    hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
    CCID: Registered CCID 2 (TCP-like)
    SCTP: Hash tables configured (established 65536 bind 65536)
    Clocksource tsc unstable (delta = -163564522 ns)
    TIPC: Activated (version 1.6.4 compiled Oct 27 2008 12:45:44)
    NET: Registered protocol family 30
    TIPC: Started in single node mode
    rtc_cmos 00:03: setting system clock to 2008-10-29 09:35:35 UTC (1225272935)
    firewire_core: created device fw0: GUID 464fc0000e451870, S400
    ehci_hcd 0000:00:1a.7: port 2 full speed --> companion
    ehci_hcd 0000:00:1a.7: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT
    hub 1-0:1.0: port 2 not reset yet, waiting 50ms
    ehci_hcd 0000:00:1a.7: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC
    hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0020
    hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0004
    hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0004
    uhci_hcd 0000:00:1a.0: port 2 portsc 0093,00
    hub 3-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
    hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
    usb 3-2: new full speed USB device using uhci_hcd and address 2
    input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input7
    usb 3-2: skipped 1 descriptor after interface
    usb 3-2: uevent
    usb 3-2: usb_probe_device
    usb 3-2: configuration #1 chosen from 1 choice
    usb 3-2: adding 3-2:1.0 (config #1, interface 0)
    usb 3-2:1.0: uevent
    usb 3-2: adding 3-2:1.1 (config #1, interface 1)
    usb 3-2:1.1: uevent
    usb 3-2: adding 3-2:1.2 (config #1, interface 2)
    usb 3-2:1.2: uevent
    drivers/usb/core/inode.c: creating file '002'
    usb 3-2: New USB device found, idVendor=413c, idProduct=8140
    usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0002
    uhci_hcd 0000:00:1d.2: port 1 portsc 0093,00
    hub 7-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
    input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input8
    hub 7-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    VFS: Mounted root (ext3 filesystem) readonly.
    Freeing unused kernel memory: 516k freed
    Write protecting the kernel read-only data: 6824k
    usb 7-1: new full speed USB device using uhci_hcd and address 2
    usb usb4: suspend_rh (auto-stop)
    usb usb5: suspend_rh (auto-stop)
    usb usb6: suspend_rh (auto-stop)
    usb 7-1: ep0 maxpacket = 8
    usb 7-1: uevent
    usb 7-1: usb_probe_device
    usb 7-1: configuration #1 chosen from 1 choice
    usb 7-1: adding 7-1:1.0 (config #1, interface 0)
    usb 7-1:1.0: uevent
    hub 7-1:1.0: usb_probe_interface
    hub 7-1:1.0: usb_probe_interface - got id
    hub 7-1:1.0: USB hub found
    hub 7-1:1.0: 4 ports detected
    hub 7-1:1.0: compound device; port removable status: RFRR
    hub 7-1:1.0: individual port power switching
    hub 7-1:1.0: individual port over-current protection
    hub 7-1:1.0: power on to power good time: 100ms
    hub 7-1:1.0: local power source is lost (inactive)
    hub 7-1:1.0: enabling power on all ports
    drivers/usb/core/inode.c: creating file '002'
    usb 7-1: New USB device found, idVendor=0b97, idProduct=7761
    usb 7-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0004
    hub 7-1:1.0: port 2: status 0101 change 0001
    uhci_hcd 0000:00:1d.2: reserve dev 2 ep81-INT, period 128, phase 0, 12 us
    hub 7-1:1.0: state 7 ports 4 chg 0004 evt 0000
    hub 7-1:1.0: port 2, status 0101, change 0000, 12 Mb/s
    usb 7-1.2: new full speed USB device using uhci_hcd and address 3
    usb 7-1.2: skipped 1 descriptor after endpoint
    usb 7-1.2: default language 0x0409
    usb 7-1.2: uevent
    usb 7-1.2: usb_probe_device
    usb 7-1.2: configuration #1 chosen from 1 choice
    usb 7-1.2: adding 7-1.2:1.0 (config #1, interface 0)
    usb 7-1.2:1.0: uevent
    drivers/usb/core/inode.c: creating file '003'
    usb 7-1.2: New USB device found, idVendor=0b97, idProduct=7772
    usb 7-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    usb 7-1.2: Product: O2Micro CCID SC Reader
    usb 7-1.2: Manufacturer: O2
    hub 7-1:1.0: state 7 ports 4 chg 0000 evt 0004
    hub 4-0:1.0: hub_suspend
    usb usb4: bus auto-suspend
    usb usb4: suspend_rh
    hub 5-0:1.0: hub_suspend
    usb usb5: bus auto-suspend
    usb usb5: suspend_rh
    hub 6-0:1.0: hub_suspend
    usb usb6: bus auto-suspend
    usb usb6: suspend_rh
    usb usb3: uevent
    usb 3-0:1.0: uevent
    usb 3-2: uevent
    usb 3-2:1.0: uevent
    usb 3-2:1.1: uevent
    usb 3-2:1.2: uevent
    usb usb4: uevent
    usb 4-0:1.0: uevent
    usb usb1: uevent
    usb 1-0:1.0: uevent
    usb usb5: uevent
    usb 5-0:1.0: uevent
    usb usb6: uevent
    usb 6-0:1.0: uevent
    usb usb7: uevent
    usb 7-0:1.0: uevent
    usb 7-1: uevent
    usb 7-1.2: uevent
    usb 7-1.2:1.0: uevent
    usb 7-1:1.0: uevent
    usb usb2: uevent
    usb 2-0:1.0: uevent
    hub 2-0:1.0: hub_suspend
    usb usb2: bus auto-suspend
    ehci_hcd 0000:00:1d.7: suspend root hub
    hub 1-0:1.0: hub_suspend
    usb usb1: bus auto-suspend
    ehci_hcd 0000:00:1a.7: suspend root hub
    Bluetooth: Generic Bluetooth USB driver ver 0.3
    btusb 3-2:1.0: usb_probe_interface
    btusb 3-2:1.0: usb_probe_interface - got id
    btusb 3-2:1.2: usb_probe_interface
    btusb 3-2:1.2: usb_probe_interface - got id
    usbcore: registered new interface driver btusb
    loadkeys[1941]: segfault at 5a0 ip 00007f436874caf9 sp 00007fff70f7dd98 error 4 in libconsole.so.0.0.0[7f436873a000+19000]
    Adding 3903752k swap on /dev/sda7. Priority:-1 extents:1 across:3903752k
    EXT3 FS on sda2, internal journal
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on sda9, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on sda8, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on sda5, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on sda6, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    CPU0 attaching NULL sched-domain.
    CPU1 attaching NULL sched-domain.
    CPU0 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 0 1
    domain 1: span 0-1 level CPU
    groups: 0-1
    CPU1 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 1 0
    domain 1: span 0-1 level CPU
    groups: 0-1
    drm: disagrees about version of symbol struct_module
    nouveau: disagrees about version of symbol struct_module
    iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    iwl3945 0000:0c:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
    iwl3945 0000:0c:00.0: irq 313 for MSI/MSI-X
    iwl3945 0000:0c:00.0: firmware: requesting iwlwifi-3945-1.ucode
    Registered led device: iwl-phy0:radio
    Registered led device: iwl-phy0:assoc
    Registered led device: iwl-phy0:RX
    Registered led device: iwl-phy0:TX
    ADDRCONF(NETDEV_UP): wlan0: link is not ready
    tg3 0000:09:00.0: irq 312 for MSI/MSI-X
    ADDRCONF(NETDEV_UP): eth0: link is not ready
    tg3: eth0: Link is up at 100 Mbps, full duplex.
    tg3: eth0: Flow control is on for TX and on for RX.
    ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    warning: `ntpd' uses 32-bit capabilities (legacy support in use)
    wlan0: authenticate with AP 00:14:1b:5a:13:40
    wlan0: authenticated
    wlan0: associate with AP 00:14:1b:5a:13:40
    wlan0: RX AssocResp from 00:14:1b:5a:13:40 (capab=0x431 status=0 aid=67)
    wlan0: associated
    ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    mtrr: base(0xe0000000) is not aligned on a size(0x7f00000) boundary
    eth0: no IPv6 routers present
    wlan0: no IPv6 routers present
    npviewer.bin[3518]: segfault at f5c29030 ip 00000000f79524c0 sp 00000000ffee7b8c error 4 in libpthread-2.7.so[f794b000+13000]
    npviewer.bin[3550]: segfault at f5c07030 ip 00000000f79304c0 sp 00000000ff8c756c error 4 in libpthread-2.7.so[f7929000+13000]
    npviewer.bin[3664]: segfault at f5c14030 ip 00000000f793d4c0 sp 00000000ffbd307c error 4 in libpthread-2.7.so[f7936000+13000]
    npviewer.bin[3707]: segfault at f5b94030 ip 00000000f78bd4c0 sp 00000000ff8524fc error 4 in libpthread-2.7.so[f78b6000+13000]
    npviewer.bin[3819]: segfault at f5bff030 ip 00000000f79284c0 sp 00000000fffbfc6c error 4 in libpthread-2.7.so[f7921000+13000]
    npviewer.bin[3969]: segfault at f5c0b030 ip 00000000f79344c0 sp 00000000ff9cbe6c error 4 in libpthread-2.7.so[f792d000+13000]
    npviewer.bin[4132]: segfault at f5bdd030 ip 00000000f79064c0 sp 00000000ffe9bb4c error 4 in libpthread-2.7.so[f78ff000+13000]
    npviewer.bin[4413]: segfault at f5bd2030 ip 00000000f78fb4c0 sp 00000000fff92c3c error 4 in libpthread-2.7.so[f78f4000+13000]
    npviewer.bin[4493]: segfault at f5b65030 ip 00000000f788e4c0 sp 00000000ffe242cc error 4 in libpthread-2.7.so[f7887000+13000]
    npviewer.bin[4641]: segfault at f5c07030 ip 00000000f79304c0 sp 00000000fffc5c6c error 4 in libpthread-2.7.so[f7929000+13000]
    npviewer.bin[4660]: segfault at f5ba2030 ip 00000000f78cb4c0 sp 00000000ffa62f0c error 4 in libpthread-2.7.so[f78c4000+13000]
    npviewer.bin[4692]: segfault at f5b45030 ip 00000000f786e4c0 sp 00000000ffd061ac error 4 in libpthread-2.7.so[f7867000+13000]
    npviewer.bin[4792]: segfault at f5b47030 ip 00000000f78704c0 sp 00000000ffe082ac error 4 in libpthread-2.7.so[f7869000+13000]
    npviewer.bin[4824]: segfault at f5bf8030 ip 00000000f79214c0 sp 00000000ff8b655c error 4 in libpthread-2.7.so[f791a000+13000]
    npviewer.bin[5137]: segfault at f5b8c030 ip 00000000f78b54c0 sp 00000000ffb4c7ec error 4 in libpthread-2.7.so[f78ae000+13000]
    npviewer.bin[5154]: segfault at f5be3030 ip 00000000f790c4c0 sp 00000000ffca394c error 4 in libpthread-2.7.so[f7905000+13000]
    npviewer.bin[5234]: segfault at f5b4d030 ip 00000000f78764c0 sp 00000000ffe0babc error 4 in libpthread-2.7.so[f786f000+13000]
    npviewer.bin[5531]: segfault at f5bb4030 ip 00000000f78dd4c0 sp 00000000ff97261c error 4 in libpthread-2.7.so[f78d6000+13000]
    npviewer.bin[5901]: segfault at f5bba030 ip 00000000f78e34c0 sp 00000000ffb7901c error 4 in libpthread-2.7.so[f78dc000+13000]
    npviewer.bin[6064]: segfault at f5b94030 ip 00000000f78bd4c0 sp 00000000ff854cfc error 4 in libpthread-2.7.so[f78b6000+13000]
    npviewer.bin[6132]: segfault at f5c11030 ip 00000000f793a4c0 sp 00000000ffad177c error 4 in libpthread-2.7.so[f7933000+13000]
    npviewer.bin[6164]: segfault at f5c04030 ip 00000000f792d4c0 sp 00000000ffcc496c error 4 in libpthread-2.7.so[f7926000+13000]
    npviewer.bin[6263]: segfault at f5bfc030 ip 00000000f79254c0 sp 00000000ff9bae5c error 4 in libpthread-2.7.so[f791e000+13000]
    npviewer.bin[6312]: segfault at f5b3e030 ip 00000000f78674c0 sp 00000000ffcfc9ac error 4 in libpthread-2.7.so[f7860000+13000]
    npviewer.bin[6344]: segfault at f5bda030 ip 00000000f79034c0 sp 00000000ffe9933c error 4 in libpthread-2.7.so[f78fc000+13000]
    npviewer.bin[6526]: segfault at f5b97030 ip 00000000f78c04c0 sp 00000000ff857cfc error 4 in libpthread-2.7.so[f78b9000+13000]
    npviewer.bin[6593]: segfault at f5ba5030 ip 00000000f78ce4c0 sp 00000000ffe65b0c error 4 in libpthread-2.7.so[f78c7000+13000]
    npviewer.bin[6722]: segfault at f5b8f030 ip 00000000f78b84c0 sp 00000000ffa4f6fc error 4 in libpthread-2.7.so[f78b1000+13000]
    npviewer.bin[6738]: segfault at f5b3f030 ip 00000000f78684c0 sp 00000000ffafffac error 4 in libpthread-2.7.so[f7861000+13000]
    npviewer.bin[6838]: segfault at f5bb8030 ip 00000000f78e14c0 sp 00000000ff97661c error 4 in libpthread-2.7.so[f78da000+13000]
    npviewer.bin[6906]: segfault at f5c39030 ip 00000000f79624c0 sp 00000000ffef9b9c error 4 in libpthread-2.7.so[f795b000+13000]
    npviewer.bin[7074]: segfault at f5b46030 ip 00000000f786f4c0 sp 00000000ffa06eac error 4 in libpthread-2.7.so[f7868000+13000]
    npviewer.bin[7220]: segfault at f5b74030 ip 00000000f789d4c0 sp 00000000ffc348dc error 4 in libpthread-2.7.so[f7896000+13000]
    npviewer.bin[7432]: segfault at f5bd3030 ip 00000000f78fc4c0 sp 00000000ff99363c error 4 in libpthread-2.7.so[f78f5000+13000]
    npviewer.bin[7499]: segfault at f5b4b030 ip 00000000f78744c0 sp 00000000ffb0b7ac error 4 in libpthread-2.7.so[f786d000+13000]
    npviewer.bin[7648]: segfault at f5bd5030 ip 00000000f78fe4c0 sp 00000000ff99363c error 4 in libpthread-2.7.so[f78f7000+13000]
    npviewer.bin[7794]: segfault at f5b60030 ip 00000000f78894c0 sp 00000000ffa206cc error 4 in libpthread-2.7.so[f7882000+13000]
    npviewer.bin[7924]: segfault at f5be8030 ip 00000000f79114c0 sp 00000000ffba704c error 4 in libpthread-2.7.so[f790a000+13000]
    npviewer.bin[8021]: segfault at f5b93030 ip 00000000f78bc4c0 sp 00000000ffe542fc error 4 in libpthread-2.7.so[f78b5000+13000]
    npviewer.bin[8145]: segfault at 2c ip 00000000f6bbc31a sp 00000000ffb48d40 error 4 in libflashplayer.so[f6b82000+778000]
    npviewer.bin[8196]: segfault at f5bf2030 ip 00000000f791b4c0 sp 00000000ff9b265c error 4 in libpthread-2.7.so[f7914000+13000]
    usb usb2: usb resume
    ehci_hcd 0000:00:1d.7: resume root hub
    hub 2-0:1.0: hub_resume
    ehci_hcd 0000:00:1d.7: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT
    hub 2-0:1.0: port 2: status 0501 change 0001
    hub 2-0:1.0: state 7 ports 6 chg 0004 evt 0000
    hub 2-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
    ehci_hcd 0000:00:1d.7: port 2 full speed --> companion
    ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT
    hub 2-0:1.0: port 2 not reset yet, waiting 50ms
    usb usb5: usb resume
    usb usb5: wakeup_rh
    hub 5-0:1.0: hub_resume
    uhci_hcd 0000:00:1d.0: port 2 portsc 0093,00
    hub 5-0:1.0: port 2: status 0101 change 0001
    ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC
    hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0004
    hub 5-0:1.0: state 7 ports 2 chg 0004 evt 0000
    hub 5-0:1.0: port 2, status 0101, change 0000, 12 Mb/s
    usb 5-2: new full speed USB device using uhci_hcd and address 2
    usb 5-2: default language 0x0409
    usb 5-2: uevent
    usb 5-2: usb_probe_device
    usb 5-2: configuration #1 chosen from 1 choice
    usb 5-2: adding 5-2:1.0 (config #1, interface 0)
    usb 5-2:1.0: uevent
    drivers/usb/core/inode.c: creating file '002'
    usb 5-2: New USB device found, idVendor=067b, idProduct=2303
    usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    usb 5-2: Product: USB-Serial Controller
    usb 5-2: Manufacturer: Prolific Technology Inc.
    usbcore: registered new interface driver usbserial
    USB Serial support registered for generic
    usbserial_generic 3-2:1.2: usb_probe_interface
    usbserial_generic 3-2:1.2: usb_probe_interface - got id
    usbserial_generic 7-1.2:1.0: usb_probe_interface
    usbserial_generic 7-1.2:1.0: usb_probe_interface - got id
    usbserial_generic 5-2:1.0: usb_probe_interface
    usbserial_generic 5-2:1.0: usb_probe_interface - got id
    usbcore: registered new interface driver usbserial_generic
    usbserial: USB Serial Driver core
    USB Serial support registered for pl2303
    pl2303 5-2:1.0: usb_probe_interface
    pl2303 5-2:1.0: usb_probe_interface - got id
    pl2303 5-2:1.0: pl2303 converter detected
    usb 5-2: pl2303 converter now attached to ttyUSB0
    usbcore: registered new interface driver pl2303
    pl2303: Prolific PL2303 USB to serial adaptor driver
    hub 2-0:1.0: hub_suspend
    usb usb2: bus auto-suspend
    ehci_hcd 0000:00:1d.7: suspend root hub
    execve("./gpsd", ["./gpsd", "-N", "-D", "7", "/dev/ttyUSB0"], [/* 25 vars */]) = 0
    brk(0) = 0x1cff000
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fa95db23000
    access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
    mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fa95db21000
    access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory)
    open("/etc/ld.so.cache", O_RDONLY) = 3
    fstat(3, {st_mode=S_IFREG|0644, st_size=107139, ...}) = 0
    mmap(NULL, 107139, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7fa95db06000
    close(3) = 0
    access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libdbus-1.so.3", O_RDONLY) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0000s\0\0\0\0\0\0@"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0644, st_size=253184, ...}) = 0
    mmap(NULL, 2349256, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fa95d6cb000
    mprotect(0x7fa95d707000, 2097152, PROT_NONE) = 0
    mmap(0x7fa95d907000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x3c000) = 0x7fa95d907000
    close(3) = 0
    access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libgps.so.17", O_RDONLY) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\340^\0\0\0\0\0\0@"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0644, st_size=178816, ...}) = 0
    mmap(NULL, 2276232, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fa95d49f000
    mprotect(0x7fa95d4c9000, 2093056, PROT_NONE) = 0
    mmap(0x7fa95d6c8000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x29000) = 0x7fa95d6c8000
    close(3) = 0
    access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
    open("/lib/libnsl.so.1", O_RDONLY) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0@@\0\0\0\0\0\0@"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0644, st_size=88968, ...}) = 0
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fa95db05000
    mmap(NULL, 2194096, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fa95d287000
    mprotect(0x7fa95d29c000, 2093056, PROT_NONE) = 0
    mmap(0x7fa95d49b000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x14000) = 0x7fa95d49b000
    mmap(0x7fa95d49d000, 6832, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7fa95d49d000
    close(3) = 0
    access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
    open("/lib/libm.so.6", O_RDONLY) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0P>\0\0\0\0\0\0@"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0644, st_size=534736, ...}) = 0
    mmap(NULL, 2629848, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fa95d004000
    mprotect(0x7fa95d086000, 2093056, PROT_NONE) = 0
    mmap(0x7fa95d285000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x81000) = 0x7fa95d285000
    close(3) = 0
    access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
    open("/lib/libpthread.so.0", O_RDONLY) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\320W\0\0\0\0\0\0@"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=130114, ...}) = 0
    mmap(NULL, 2208624, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fa95cde8000
    mprotect(0x7fa95cdfe000, 2097152, PROT_NONE) = 0
    mmap(0x7fa95cffe000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x16000) = 0x7fa95cffe000
    mmap(0x7fa95d000000, 13168, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7fa95d000000
    close(3) = 0
    access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
    open("/lib/libc.so.6", O_RDONLY) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\300\342\1\0\0\0\0\0@"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=1375536, ...}) = 0
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fa95db04000
    mmap(NULL, 3482232, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fa95ca95000
    mprotect(0x7fa95cbdf000, 2093056, PROT_NONE) = 0
    mmap(0x7fa95cdde000, 20480, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x149000) = 0x7fa95cdde000
    mmap(0x7fa95cde3000, 17016, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7fa95cde3000
    close(3) = 0
    access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
    open("/lib/libgcc_s.so.1", O_RDONLY) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0 ,\0\0\0\0\0\0@"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0644, st_size=93016, ...}) = 0
    mmap(NULL, 2188856, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fa95c87e000
    mprotect(0x7fa95c894000, 2097152, PROT_NONE) = 0
    mmap(0x7fa95ca94000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x16000) = 0x7fa95ca94000
    close(3) = 0
    access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libstdc++.so.6", O_RDONLY) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\300g\5\0\0\0\0\0@"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0644, st_size=1019216, ...}) = 0
    mmap(NULL, 3191480, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fa95c572000
    mprotect(0x7fa95c662000, 2097152, PROT_NONE) = 0
    mmap(0x7fa95c862000, 36864, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xf0000) = 0x7fa95c862000
    mmap(0x7fa95c86b000, 74424, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7fa95c86b000
    close(3) = 0
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fa95db03000
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fa95db02000
    arch_prctl(ARCH_SET_FS, 0x7fa95db026f0) = 0
    mprotect(0x7fa95c862000, 24576, PROT_READ) = 0
    mprotect(0x7fa95cdde000, 12288, PROT_READ) = 0
    munmap(0x7fa95db06000, 107139) = 0
    set_tid_address(0x7fa95db02780) = 8700
    set_robust_list(0x7fa95db02790, 0x18) = 0
    futex(0x7fff65b2516c, FUTEX_WAKE_PRIVATE, 1) = 0
    rt_sigaction(SIGRTMIN, {0x7fa95cded660, [], SA_RESTORER|SA_SIGINFO, 0x7fa95cdf6a80}, NULL, 8) = 0
    rt_sigaction(SIGRT_1, {0x7fa95cded6f0, [], SA_RESTORER|SA_RESTART|SA_SIGINFO, 0x7fa95cdf6a80}, NULL, 8) = 0
    rt_sigprocmask(SIG_UNBLOCK, [RTMIN RT_1], NULL, 8) = 0
    getrlimit(RLIMIT_STACK, {rlim_cur=8192*1024, rlim_max=RLIM_INFINITY}) = 0
    write(2, "gpsd: launching (Version 2.37)\n"..., 31gpsd: launching (Version 2.37)
    ) = 31
    brk(0) = 0x1cff000
    brk(0x1d20000) = 0x1d20000
    socket(PF_FILE, SOCK_STREAM, 0) = 3
    fcntl(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0
    connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"...}, 110) = -1 ENOENT (No such file or directory)
    close(3) = 0
    socket(PF_FILE, SOCK_STREAM, 0) = 3
    fcntl(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0
    connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"...}, 110) = -1 ENOENT (No such file or directory)
    close(3) = 0
    open("/etc/nsswitch.conf", O_RDONLY) = 3
    fstat(3, {st_mode=S_IFREG|0644, st_size=528, ...}) = 0
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fa95db20000
    read(3, "# /etc/nsswitch.conf\n#\n# Example "..., 4096) = 528
    read(3, ""..., 4096) = 0
    close(3) = 0
    munmap(0x7fa95db20000, 4096) = 0
    open("/etc/ld.so.cache", O_RDONLY) = 3
    fstat(3, {st_mode=S_IFREG|0644, st_size=107139, ...}) = 0
    mmap(NULL, 107139, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7fa95db06000
    close(3) = 0
    access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
    open("/lib/tls/x86_64/libnss_db.so.2", O_RDONLY) = -1 ENOENT (No such file or directory)
    stat("/lib/tls/x86_64", 0x7fff65b22400) = -1 ENOENT (No such file or directory)
    open("/lib/tls/libnss_db.so.2", O_RDONLY) = -1 ENOENT (No such file or directory)
    stat("/lib/tls", 0x7fff65b22400) = -1 ENOENT (No such file or directory)
    open("/lib/x86_64/libnss_db.so.2", O_RDONLY) = -1 ENOENT (No such file or directory)
    stat("/lib/x86_64", 0x7fff65b22400) = -1 ENOENT (No such file or directory)
    open("/lib/libnss_db.so.2", O_RDONLY) = -1 ENOENT (No such file or directory)
    stat("/lib", {st_mode=S_IFDIR|0755, st_size=12288, ...}) = 0
    open("/usr/lib/tls/x86_64/libnss_db.so.2", O_RDONLY) = -1 ENOENT (No such file or directory)
    stat("/usr/lib/tls/x86_64", 0x7fff65b22400) = -1 ENOENT (No such file or directory)
    open("/usr/lib/tls/libnss_db.so.2", O_RDONLY) = -1 ENOENT (No such file or directory)
    stat("/usr/lib/tls", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
    open("/usr/lib/x86_64/libnss_db.so.2", O_RDONLY) = -1 ENOENT (No such file or directory)
    stat("/usr/lib/x86_64", 0x7fff65b22400) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libnss_db.so.2", O_RDONLY) = -1 ENOENT (No such file or directory)
    stat("/usr/lib", {st_mode=S_IFDIR|0755, st_size=106496, ...}) = 0
    open("/lib/x86_64-linux-gnu/tls/x86_64/libnss_db.so.2", O_RDONLY) = -1 ENOENT (No such file or directory)
    stat("/lib/x86_64-linux-gnu/tls/x86_64", 0x7fff65b22400) = -1 ENOENT (No such file or directory)
    open("/lib/x86_64-linux-gnu/tls/libnss_db.so.2", O_RDONLY) = -1 ENOENT (No such file or directory)
    stat("/lib/x86_64-linux-gnu/tls", 0x7fff65b22400) = -1 ENOENT (No such file or directory)
    open("/lib/x86_64-linux-gnu/x86_64/libnss_db.so.2", O_RDONLY) = -1 ENOENT (No such file or directory)
    stat("/lib/x86_64-linux-gnu/x86_64", 0x7fff65b22400) = -1 ENOENT (No such file or directory)
    open("/lib/x86_64-linux-gnu/libnss_db.so.2", O_RDONLY) = -1 ENOENT (No such file or directory)
    stat("/lib/x86_64-linux-gnu", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
    open("/usr/lib/x86_64-linux-gnu/tls/x86_64/libnss_db.so.2", O_RDONLY) = -1 ENOENT (No such file or directory)
    stat("/usr/lib/x86_64-linux-gnu/tls/x86_64", 0x7fff65b22400) = -1 ENOENT (No such file or directory)
    open("/usr/lib/x86_64-linux-gnu/tls/libnss_db.so.2", O_RDONLY) = -1 ENOENT (No such file or directory)
    stat("/usr/lib/x86_64-linux-gnu/tls", 0x7fff65b22400) = -1 ENOENT (No such file or directory)
    open("/usr/lib/x86_64-linux-gnu/x86_64/libnss_db.so.2", O_RDONLY) = -1 ENOENT (No such file or directory)
    stat("/usr/lib/x86_64-linux-gnu/x86_64", 0x7fff65b22400) = -1 ENOENT (No such file or directory)
    open("/usr/lib/x86_64-linux-gnu/libnss_db.so.2", O_RDONLY) = -1 ENOENT (No such file or directory)
    stat("/usr/lib/x86_64-linux-gnu", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
    munmap(0x7fa95db06000, 107139) = 0
    open("/etc/ld.so.cache", O_RDONLY) = 3
    fstat(3, {st_mode=S_IFREG|0644, st_size=107139, ...}) = 0
    mmap(NULL, 107139, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7fa95db06000
    close(3) = 0
    access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
    open("/lib/libnss_files.so.2", O_RDONLY) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\340\37\0\0\0\0\0\0@"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0644, st_size=47520, ...}) = 0
    mmap(NULL, 2143528, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fa95c366000
    mprotect(0x7fa95c370000, 2097152, PROT_NONE) = 0
    mmap(0x7fa95c570000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xa000) = 0x7fa95c570000
    close(3) = 0
    munmap(0x7fa95db06000, 107139) = 0
    open("/etc/services", O_RDONLY|O_CLOEXEC) = 3
    fcntl(3, F_GETFD) = 0x1 (flags FD_CLOEXEC)
    fstat(3, {st_mode=S_IFREG|0644, st_size=18480, ...}) = 0
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fa95db20000
    read(3, "# Network services, Internet styl"..., 4096) = 4096
    read(3, "9/tcp\t\t\t\t# Quick Mail Transfer Pr"..., 4096) = 4096
    read(3, "note\t1352/tcp\tlotusnotes\t# Lotus "..., 4096) = 4096
    close(3) = 0
    munmap(0x7fa95db20000, 4096) = 0
    open("/etc/services", O_RDONLY|O_CLOEXEC) = 3
    fstat(3, {st_mode=S_IFREG|0644, st_size=18480, ...}) = 0
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fa95db20000
    read(3, "# Network services, Internet styl"..., 4096) = 4096
    read(3, "9/tcp\t\t\t\t# Quick Mail Transfer Pr"..., 4096) = 4096
    read(3, "note\t1352/tcp\tlotusnotes\t# Lotus "..., 4096) = 4096
    close(3) = 0
    munmap(0x7fa95db20000, 4096) = 0
    open("/etc/protocols", O_RDONLY|O_CLOEXEC) = 3
    fstat(3, {st_mode=S_IFREG|0644, st_size=2626, ...}) = 0
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fa95db20000
    read(3, "# Internet (IP) protocols\n#\n# Upd"..., 4096) = 2626
    close(3) = 0
    munmap(0x7fa95db20000, 4096) = 0
    socket(PF_INET, SOCK_STREAM, IPPROTO_TCP) = 3
    setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
    bind(3, {sa_family=AF_INET, sin_port=htons(2947), sin_addr=inet_addr("0.0.0.0")}, 16) = 0
    listen(3, 5) = 0
    write(2, "gpsd: listening on port gpsd\n"..., 29gpsd: listening on port gpsd
    ) = 29
    getuid() = 0
    getpriority(PRIO_PROCESS, 0) = 20
    setpriority(PRIO_PROCESS, 0, 4294967286) = 0
    getpriority(PRIO_PROCESS, 0) = 30
    shmget(0x4e545030, 96, IPC_CREAT|0644) = 49315843
    shmat(49315843, 0, 0) = ?
    write(2, "gpsd: shmat(0,0,0) succeeded\n"..., 29gpsd: shmat(0,0,0) succeeded
    ) = 29
    shmget(0x4e545031, 96, IPC_CREAT|0644) = 49348612
    shmat(49348612, 0, 0) = ?
    write(2, "gpsd: shmat(0,0,0) succeeded\n"..., 29gpsd: shmat(0,0,0) succeeded
    ) = 29
    shmget(0x4e545032, 96, IPC_CREAT|0644) = 49381381
    shmat(49381381, 0, 0) = ?
    write(2, "gpsd: shmat(0,0,0) succeeded\n"..., 29gpsd: shmat(0,0,0) succeeded
    ) = 29
    shmget(0x4e545033, 96, IPC_CREAT|0644) = 49414150
    shmat(49414150, 0, 0) = ?
    write(2, "gpsd: shmat(0,0,0) succeeded\n"..., 29gpsd: shmat(0,0,0) succeeded
    ) = 29
    socket(PF_FILE, SOCK_STREAM, 0) = 4
    connect(4, {sa_family=AF_FILE, path="/var/run/dbus/system_bus_socket"...}, 33) = 0
    fcntl(4, F_GETFL) = 0x2 (flags O_RDWR)
    fcntl(4, F_SETFL, O_RDWR|O_NONBLOCK) = 0
    fcntl(4, F_GETFD) = 0
    fcntl(4, F_SETFD, FD_CLOEXEC) = 0
    geteuid() = 0
    rt_sigaction(SIGPIPE, {SIG_IGN}, {SIG_DFL}, 8) = 0
    poll([{fd=4, events=POLLOUT}], 1, 0) = 1 ([{fd=4, revents=POLLOUT}])
    write(4, "\0"..., 1) = 1
    write(4, "AUTH EXTERNAL 30\r\n"..., 18) = 18
    poll([{fd=4, events=POLLIN}], 1, -1) = 1 ([{fd=4, revents=POLLIN}])
    read(4, "OK be896d574206d5059da6b49849082e"..., 2048) = 37
    poll([{fd=4, events=POLLOUT}], 1, -1) = 1 ([{fd=4, revents=POLLOUT}])
    write(4, "BEGIN\r\n"..., 7) = 7
    poll([{fd=4, events=POLLIN|POLLOUT}], 1, -1) = 1 ([{fd=4, revents=POLLOUT}])
    writev(4, [{"l\1\0\1\0\0\0\0\1\0\0\0n\0\0\0\1\1o\0\25\0\0\0/org/free"..., 128}, {""..., 0}], 2) = 128
    poll([{fd=4, events=POLLIN}], 1, 25000) = 1 ([{fd=4, revents=POLLIN}])
    read(4, "l\2\1\1\t\0\0\0\1\0\0\0=\0\0\0\6\1s\0\4\0\0\0:1.6\0\0\0\0\5"..., 2048) = 258
    read(4, 0x1d02320, 2048) = -1 EAGAIN (Resource temporarily unavailable)
    write(2, "gpsd: successfully connected to t"..., 52gpsd: successfully connected to the DBUS system bus
    ) = 52
    getuid() = 0
    getegid() = 0
    write(2, "gpsd: running with effective grou"..., 40gpsd: running with effective group ID 0
    ) = 40
    geteuid() = 0
    write(2, "gpsd: running with effective user"..., 39gpsd: running with effective user ID 0
    ) = 39
    rt_sigaction(SIGHUP, {0x4026c0, [HUP], SA_RESTORER|SA_RESTART, 0x7fa95cac6f60}, {SIG_DFL}, 8) = 0
    rt_sigaction(SIGINT, {0x4026c0, [INT], SA_RESTORER|SA_RESTART, 0x7fa95cac6f60}, {SIG_DFL}, 8) = 0
    rt_sigaction(SIGTERM, {0x4026c0, [TERM], SA_RESTORER|SA_RESTART, 0x7fa95cac6f60}, {SIG_DFL}, 8) = 0
    rt_sigaction(SIGQUIT, {0x4026c0, [QUIT], SA_RESTORER|SA_RESTART, 0x7fa95cac6f60}, {SIG_DFL}, 8) = 0
    rt_sigaction(SIGPIPE, {SIG_IGN}, {SIG_IGN}, 8) = 0
    stat("/dev/ttyUSB0", {st_mode=S_IFCHR|0660, st_rdev=makedev(188, 0), ...}) = 0
    write(2, "gpsd: opening GPS data source at "..., 48gpsd: opening GPS data source at '/dev/ttyUSB0'
    ) = 48
    open("/dev/ttyUSB0", O_RDWR|O_NOCTTY|O_NONBLOCK) = -1 EIO (Input/output error)
    write(2, "gpsd: device open failed: Input/o"..., 66gpsd: device open failed: Input/output error - retrying read-only
    ) = 66
    open("/dev/ttyUSB0", O_RDONLY|O_NOCTTY|O_NONBLOCK) = -1 EIO (Input/output error)
    write(2, "gpsd: read-only device open faile"..., 55gpsd: read-only device open failed: Input/output error
    ) = 55
    write(2, "gpsd: GPS device /dev/ttyUSB0 non"..., 59gpsd: GPS device /dev/ttyUSB0 nonexistent or can't be read
    ) = 59
    write(2, "gpsd: select waits\n"..., 19gpsd: select waits
    ) = 19
    select(4, [3], NULL, NULL, {1, 0}) = 0 (Timeout)
    write(2, "gpsd: select waits\n"..., 19gpsd: select waits
    ) = 19
    select(4, [3], NULL, NULL, {1, 0}) = 0 (Timeout)
    write(2, "gpsd: select waits\n"..., 19gpsd: select waits
    ) = 19
    select(4, [3], NULL, NULL, {1, 0}) = 0 (Timeout)
    write(2, "gpsd: select waits\n"..., 19gpsd: select waits
    ) = 19
    select(4, [3], NULL, NULL, {1, 0}) = 0 (Timeout)
    write(2, "gpsd: select waits\n"..., 19gpsd: select waits
    ) = 19
    select(4, [3], NULL, NULL, {1, 0}) = 0 (Timeout)
    write(2, "gpsd: select waits\n"..., 19gpsd: select waits
    ) = 19
    select(4, [3], NULL, NULL, {1, 0}) = 0 (Timeout)
    write(2, "gpsd: select waits\n"..., 19gpsd: select waits
    ) = 19
    select(4, [3], NULL, NULL, {1, 0}) = 0 (Timeout)
    write(2, "gpsd: select waits\n"..., 19gpsd: select waits
    ) = 19
    select(4, [3], NULL, NULL, {1, 0}) = 0 (Timeout)
    write(2, "gpsd: select waits\n"..., 19gpsd: select waits
    ) = 19
    select(4, [3], NULL, NULL, {1, 0}) = 0 (Timeout)
    write(2, "gpsd: select waits\n"..., 19gpsd: select waits
    ) = 19
    select(4, [3], NULL, NULL, {1, 0} <unfinished ...>
    gpsd: Received terminating signal 2. Exiting...
    lose cover RAM: 255M
    gran_size: 256M chunk_size: 2G num_reg: 2 lose cover RAM: 255M
    gran_size: 512M chunk_size: 512M num_reg: 2 lose cover RAM: 511M
    gran_size: 512M chunk_size: 1G num_reg: 2 lose cover RAM: 511M
    gran_size: 512M chunk_size: 2G num_reg: 2 lose cover RAM: 511M
    gran_size: 1G chunk_size: 1G num_reg: 1 lose cover RAM: 1023M
    gran_size: 1G chunk_size: 2G num_reg: 1 lose cover RAM: 1023M
    gran_size: 2G chunk_size: 2G num_reg: 0 lose cover RAM: 2047M
    Found optimal setting for mtrr clean up
    gran_size: 64K chunk_size: 2M num_reg: 2 lose RAM: 0G
    range0: 0000000000000000 - 0000000080000000
    Setting variable MTRR 0, base: 0GB, range: 2GB, type WB
    hole: 000000007ff00000 - 0000000080000000
    Setting variable MTRR 1, base: 2047MB, range: 1MB, type UC
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Scanning 2 areas for low memory corruption
    modified physical RAM map:
    modified: 0000000000000000 - 0000000000001000 (usable)
    modified: 0000000000001000 - 0000000000006000 (reserved)
    modified: 0000000000006000 - 0000000000008000 (usable)
    modified: 0000000000008000 - 0000000000010000 (reserved)
    modified: 0000000000010000 - 0000000000092000 (usable)
    modified: 000000000009f000 - 00000000000a0000 (reserved)
    modified: 0000000000100000 - 000000007fe5a800 (usable)
    modified: 000000007fe5a800 - 0000000080000000 (reserved)
    modified: 00000000f8000000 - 00000000fc000000 (reserved)
    modified: 00000000fec00000 - 00000000fec10000 (reserved)
    modified: 00000000fed18000 - 00000000fed1c000 (reserved)
    modified: 00000000fed20000 - 00000000fed90000 (reserved)
    modified: 00000000feda0000 - 00000000feda6000 (reserved)
    modified: 00000000fee00000 - 00000000fee10000 (reserved)
    modified: 00000000ffe00000 - 0000000100000000 (reserved)
    init_memory_mapping
    0000000000 - 007fe00000 page 2M
    007fe00000 - 007fe5a000 page 4k
    kernel direct mapping tables up to 7fe5a000 @ 10000-14000
    last_map_addr: 7fe5a000 end: 7fe5a000
    ACPI: RSDP 000FBB10, 0024 (r2 DELL )
    ACPI: XSDT 7FE5D200, 0064 (r1 DELL M08 27D80715 ASL 61)
    ACPI: FACP 7FE5D09C, 00F4 (r4 DELL M08 27D80715 ASL 61)
    ACPI: DSDT 7FE5D800, 63EA (r2 INT430 SYSFexxx 1001 INTL 20050624)
    ACPI: FACS 7FE6C000, 0040
    ACPI: HPET 7FE5D300, 0038 (r1 DELL M08 1 ASL 61)
    ACPI: APIC 7FE5D400, 0068 (r1 DELL M08 27D80715 ASL 47)
    ACPI: ASF! 7FE5D000, 007E (r32 DELL M08 27D80715 ASL 61)
    ACPI: MCFG 7FE5D3C0, 003E (r16 DELL M08 27D80715 ASL 61)
    ACPI: TCPA 7FE5D700, 0032 (r1 0 ASL 0)
    ACPI: SLIC 7FE5D49C, 0176 (r1 DELL M08 27D80715 ASL 61)
    ACPI: SSDT 7FE5BA02, 04CC (r1 PmRef CpuPm 3000 INTL 20050624)
    ACPI: DMI detected: Dell Latitude D830
    ACPI: Local APIC address 0xfee00000
    (5 early reservations) ==> bootmem [0000000000 - 007fe5a000]
    #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
    #2 [0000200000 - 0000b019f0] TEXT DATA BSS ==> [0000200000 - 0000b019f0]
    #3 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
    #4 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
    [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0
    Zone PFN ranges:
    DMA 0x00000000 -> 0x00001000
    DMA32 0x00001000 -> 0x00100000
    Normal 0x00100000 -> 0x00100000
    Movable zone start PFN for each node
    early_node_map[4] active PFN ranges
    0: 0x00000000 -> 0x00000001
    0: 0x00000006 -> 0x00000008
    0: 0x00000010 -> 0x00000092
    0: 0x00000100 -> 0x0007fe5a
    On node 0 totalpages: 523743
    DMA zone: 56 pages used for memmap
    DMA zone: 2407 pages reserved
    DMA zone: 1510 pages, LIFO batch:0
    DMA32 zone: 7107 pages used for memmap
    DMA32 zone: 512663 pages, LIFO batch:31
    Normal zone: 0 pages used for memmap
    Movable zone: 0 pages used for memmap
    ACPI: PM-Timer IO Port: 0x1008
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    ACPI: HPET id: 0x8086a201 base: 0xfed00000
    Using ACPI (MADT) for SMP configuration information
    SMP: Allowing 2 CPUs, 0 hotplug CPUs
    PM: Registered nosave memory: 0000000000001000 - 0000000000006000
    PM: Registered nosave memory: 0000000000008000 - 0000000000010000
    PM: Registered nosave memory: 0000000000092000 - 000000000009f000
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
    Allocating PCI resources starting at 88000000 (gap: 80000000:78000000)
    PERCPU: Allocating 57344 bytes of per cpu data
    NR_CPUS: 2, nr_cpu_ids: 2, nr_node_ids 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 514173
    Kernel command line: root=/dev/sda2 ro
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 32768 bytes)
    Extended CMOS year: 2000
    TSC: PIT calibration matches PMTIMER. 1 loops
    Detected 1795.493 MHz processor.
    Console: colour VGA+ 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
    Scanning for low memory corruption every 60 seconds
    Checking aperture...
    No AGP bridge found
    Calgary: detecting Calgary via BIOS EBDA area
    Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    Memory: 2053352k/2095464k available (5043k kernel code, 41232k reserved, 2533k data, 516k init)
    SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    hpet clockevent registered
    HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    Calibrating delay loop (skipped), value calculated using timer frequency.. 3592.61 BogoMIPS (lpj=5984976)
    Mount-cache hash table entries: 256
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 2048K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    CPU0: Thermal monitoring enabled (TM2)
    using mwait in idle threads.
    ACPI: Core revision 20080926
    Setting APIC routing to flat
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d
    Booting processor 1 APIC 0x1 ip 0x6000
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 3592.63 BogoMIPS (lpj=5985012)
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 2048K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 1
    CPU1: Thermal monitoring enabled (TM2)
    x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
    CPU1: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d
    checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    Brought up 2 CPUs
    Total of 2 processors activated (7184.24 BogoMIPS).
    CPU0 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 0 1
    CPU1 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 1 0
    net_namespace: 1400 bytes
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
    PCI: MCFG area at f8000000 reserved in E820
    PCI: Using MMCONFIG at f8000000 - fbffffff
    PCI: Using configuration type 1 for base access
    ACPI: EC: Look up EC in DSDT
    ACPI: BIOS _OSI(Linux) query ignored via DMI
    ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
    ACPI Warning (tbutils-0217): Incorrect checksum in table [TCPA] - B3, should be 57 [20080926]
    ACPI: SSDT 7FE6C080, 0043 (r1 LMPWR DELLLOM 1001 INTL 20050624)
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: ACPI Dock Station Driver: 3 docks/bays found
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:01.0: PME# disabled
    pci 0000:00:1a.0: reg 20 io port: [0x6f20-0x6f3f]
    pci 0000:00:1a.1: reg 20 io port: [0x6f00-0x6f1f]
    pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff]
    pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1a.7: PME# disabled
    pci 0000:00:1b.0: reg 10 64bit mmio: [0xf6ffc000-0xf6ffffff]
    pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1b.0: PME# disabled
    pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.0: PME# disabled
    pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.1: PME# disabled
    pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.3: PME# disabled
    pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.5: PME# disabled
    pci 0000:00:1d.0: reg 20 io port: [0x6f80-0x6f9f]
    pci 0000:00:1d.1: reg 20 io port: [0x6f60-0x6f7f]
    pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f]
    pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff]
    pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1d.7: PME# disabled
    pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
    pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO
    pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
    pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
    pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
    pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
    pci 0000:00:1f.1: reg 20 io port: [0x6fa0-0x6faf]
    pci 0000:00:1f.2: reg 10 io port: [0x6eb0-0x6eb7]
    pci 0000:00:1f.2: reg 14 io port: [0x6eb8-0x6ebb]
    pci 0000:00:1f.2: reg 18 io port: [0x6ec0-0x6ec7]
    pci 0000:00:1f.2: reg 1c io port: [0x6ec8-0x6ecb]
    pci 0000:00:1f.2: reg 20 io port: [0x6ee0-0x6eff]
    pci 0000:00:1f.2: reg 24 32bit mmio: [0xf6ffb800-0xf6ffbfff]
    pci 0000:00:1f.2: PME# supported from D3hot
    pci 0000:00:1f.2: PME# disabled
    pci 0000:00:1f.3: reg 10 32bit mmio: [0xf6ffb700-0xf6ffb7ff]
    pci 0000:00:1f.3: reg 20 io port: [0x10c0-0x10df]
    pci 0000:01:00.0: reg 10 32bit mmio: [0xf5000000-0xf5ffffff]
    pci 0000:01:00.0: reg 14 64bit mmio: [0xe0000000-0xefffffff]
    pci 0000:01:00.0: reg 1c 64bit mmio: [0xf2000000-0xf3ffffff]
    pci 0000:01:00.0: reg 24 io port: [0xef00-0xef7f]
    pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
    pci 0000:00:01.0: bridge io port: [0xe000-0xefff]
    pci 0000:00:01.0: bridge 32bit mmio: [0xf2000000-0xf6efffff]
    pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff]
    pci 0000:0c:00.0: reg 10 32bit mmio: [0xf1fff000-0xf1ffffff]
    pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
    pci 0000:0c:00.0: PME# disabled
    pci 0000:00:1c.1: bridge 32bit mmio: [0xf1f00000-0xf1ffffff]
    pci 0000:00:1c.3: bridge io port: [0xd000-0xdfff]
    pci 0000:00:1c.3: bridge 32bit mmio: [0xf1c00000-0xf1efffff]
    pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf0000000-0xf01fffff]
    pci 0000:09:00.0: reg 10 64bit mmio: [0xf1bf0000-0xf1bfffff]
    pci 0000:09:00.0: PME# supported from D3hot D3cold
    pci 0000:09:00.0: PME# disabled
    pci 0000:00:1c.5: bridge 32bit mmio: [0xf1b00000-0xf1bfffff]
    pci 0000:03:01.0: reg 10 32bit mmio: [0x000000-0x000fff]
    pci 0000:03:01.0: supports D1 D2
    pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:03:01.0: PME# disabled
    pci 0000:03:01.4: reg 10 32bit mmio: [0xf1aff000-0xf1afffff]
    pci 0000:03:01.4: reg 14 32bit mmio: [0xf1afe800-0xf1afefff]
    pci 0000:03:01.4: supports D1 D2
    pci 0000:03:01.4: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:03:01.4: PME# disabled
    pci 0000:00:1e.0: transparent bridge
    pci 0000:00:1e.0: bridge 32bit mmio: [0xf1a00000-0xf1afffff]
    bus 00 -> node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *5
    ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *3
    ACPI: PCI Interrupt Link [LNKC] (IRQs 9 *10 11)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *9 10 11)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    ACPI: WMI: Mapper loaded
    SCSI subsystem initialized
    libata version 3.00 loaded.
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    PCI: Using ACPI for IRQ routing
    Bluetooth: Core ver 2.13
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    cfg80211: Using static regulatory domain info
    cfg80211: Regulatory domain: US
    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
    (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
    (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
    (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
    (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
    (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
    cfg80211: Calling CRDA for country: US
    PCI-GART: No AMD northbridge found.
    hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp 00:0b: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
    pnp 00:0b: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
    pnp 00:0c: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
    pnp 00:0c: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
    pnp 00:0c: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
    pnp 00:0c: io resource (0x1010-0x102f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
    pnp: PnP ACPI: found 14 devices
    ACPI: ACPI bus type pnp unregistered
    system 00:05: ioport range 0xc80-0xcaf has been reserved
    system 00:05: ioport range 0xcc0-0xcff could not be reserved
    system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved
    system 00:0b: ioport range 0x900-0x97f has been reserved
    system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
    system 00:0c: ioport range 0xf400-0xf4fe has been reserved
    system 00:0c: ioport range 0x1080-0x10bf has been reserved
    system 00:0c: ioport range 0x10c0-0x10df has been reserved
    system 00:0c: ioport range 0x809-0x809 has been reserved
    system 00:0d: iomem range 0x0-0x9efff could not be reserved
    system 00:0d: iomem range 0x9f000-0x9ffff could not be reserved
    system 00:0d: iomem range 0xc0000-0xcffff has been reserved
    system 00:0d: iomem range 0xe0000-0xfffff has been reserved
    system 00:0d: iomem range 0x100000-0x7fe5a7ff could not be reserved
    system 00:0d: iomem range 0x7fe5a800-0x7fefffff could not be reserved
    system 00:0d: iomem range 0x7ff00000-0x7fffffff could not be reserved
    system 00:0d: iomem range 0x7ff00000-0x806fffff could not be reserved
    system 00:0d: iomem range 0xffe00000-0xffffffff could not be reserved
    system 00:0d: iomem range 0xffa00000-0xffbfffff has been reserved
    system 00:0d: iomem range 0xfec00000-0xfec0ffff could not be reserved
    system 00:0d: iomem range 0xfee00000-0xfee0ffff could not be reserved
    system 00:0d: iomem range 0xfed20000-0xfed3ffff could not be reserved
    system 00:0d: iomem range 0xfed45000-0xfed8ffff could not be reserved
    system 00:0d: iomem range 0xfeda0000-0xfeda3fff could not be reserved
    system 00:0d: iomem range 0xfeda4000-0xfeda4fff could not be reserved
    system 00:0d: iomem range 0xfeda5000-0xfeda5fff could not be reserved
    system 00:0d: iomem range 0xfeda6000-0xfeda6fff has been reserved
    system 00:0d: iomem range 0xfed18000-0xfed1bfff could not be reserved
    system 00:0d: iomem range 0xf8000000-0xfbffffff could not be reserved
    pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
    pci 0000:00:01.0: IO window: 0xe000-0xefff
    pci 0000:00:01.0: MEM window: 0xf2000000-0xf6efffff
    pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff
    pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b
    pci 0000:00:1c.0: IO window: disabled
    pci 0000:00:1c.0: MEM window: disabled
    pci 0000:00:1c.0: PREFETCH window: disabled
    pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c
    pci 0000:00:1c.1: IO window: disabled
    pci 0000:00:1c.1: MEM window: 0xf1f00000-0xf1ffffff
    pci 0000:00:1c.1: PREFETCH window: disabled
    pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0d
    pci 0000:00:1c.3: IO window: 0xd000-0xdfff
    pci 0000:00:1c.3: MEM window: 0xf1c00000-0xf1efffff
    pci 0000:00:1c.3: PREFETCH window: 0x000000f0000000-0x000000f01fffff
    pci 0000:00:1c.5: PCI bridge, secondary bus 0000:09
    pci 0000:00:1c.5: IO window: disabled
    pci 0000:00:1c.5: MEM window: 0xf1b00000-0xf1bfffff
    pci 0000:00:1c.5: PREFETCH window: disabled
    pci 0000:03:01.0: CardBus bridge, secondary bus 0000:04
    pci 0000:03:01.0: IO window: 0x002000-0x0020ff
    pci 0000:03:01.0: IO window: 0x002400-0x0024ff
    pci 0000:03:01.0: PREFETCH window: 0x88000000-0x8bffffff
    pci 0000:03:01.0: MEM window: 0x8c000000-0x8fffffff
    pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
    pci 0000:00:1e.0: IO window: 0x2000-0x2fff
    pci 0000:00:1e.0: MEM window: 0xf1a00000-0xf1afffff
    pci 0000:00:1e.0: PREFETCH window: 0x00000088000000-0x0000008bffffff
    pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pci 0000:00:01.0: setting latency timer to 64
    pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pci 0000:00:1c.0: setting latency timer to 64
    pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    pci 0000:00:1c.1: setting latency timer to 64
    pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    pci 0000:00:1c.3: setting latency timer to 64
    pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    pci 0000:00:1c.5: setting latency timer to 64
    pci 0000:00:1e.0: setting latency timer to 64
    pci 0000:03:01.0: enabling device (0000 -> 0003)
    pci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    bus: 00 index 0 io port: [0x00-0xffff]
    bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
    bus: 01 index 0 io port: [0xe000-0xefff]
    bus: 01 index 1 mmio: [0xf2000000-0xf6efffff]
    bus: 01 index 2 mmio: [0xe0000000-0xefffffff]
    bus: 01 index 3 mmio: [0x0-0x0]
    bus: 0b index 0 mmio: [0x0-0x0]
    bus: 0b index 1 mmio: [0x0-0x0]
    bus: 0b index 2 mmio: [0x0-0x0]
    bus: 0b index 3 mmio: [0x0-0x0]
    bus: 0c index 0 mmio: [0x0-0x0]
    bus: 0c index 1 mmio: [0xf1f00000-0xf1ffffff]
    bus: 0c index 2 mmio: [0x0-0x0]
    bus: 0c index 3 mmio: [0x0-0x0]
    bus: 0d index 0 io port: [0xd000-0xdfff]
    bus: 0d index 1 mmio: [0xf1c00000-0xf1efffff]
    bus: 0d index 2 mmio: [0xf0000000-0xf01fffff]
    bus: 0d index 3 mmio: [0x0-0x0]
    bus: 09 index 0 mmio: [0x0-0x0]
    bus: 09 index 1 mmio: [0xf1b00000-0xf1bfffff]
    bus: 09 index 2 mmio: [0x0-0x0]
    bus: 09 index 3 mmio: [0x0-0x0]
    bus: 03 index 0 io port: [0x2000-0x2fff]
    bus: 03 index 1 mmio: [0xf1a00000-0xf1afffff]
    bus: 03 index 2 mmio: [0x88000000-0x8bffffff]
    bus: 03 index 3 io port: [0x00-0xffff]
    bus: 03 index 4 mmio: [0x000000-0xffffffffffffffff]
    bus: 04 index 0 io port: [0x2000-0x20ff]
    bus: 04 index 1 io port: [0x2400-0x24ff]
    bus: 04 index 2 mmio: [0x88000000-0x8bffffff]
    bus: 04 index 3 mmio: [0x8c000000-0x8fffffff]
    NET: Registered protocol family 2
    Switched to high resolution mode on CPU 1
    Switched to high resolution mode on CPU 0
    IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
    TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
    TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    TCP: Hash tables configured (established 262144 bind 65536)
    TCP reno registered
    NET: Registered protocol family 1
    Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk> <peter.oruba@amd.com>
    audit: initializing netlink socket (disabled)
    type=2000 audit(1225272931.524:1): initialized
    HugeTLB registered 2 MB page size, pre-allocated 0 pages
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    fuse init (API version 7.10)
    msgmni has been set to 4011
    alg: No test for stdrng (krng)
    alg: No test for stdrng (ansi_cprng)
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0080
    pci 0000:00:1a.0: Performing full reset
    pci 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0080
    pci 0000:00:1a.1: Performing full reset
    pci 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0080
    pci 0000:00:1d.0: Performing full reset
    pci 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0080
    pci 0000:00:1d.1: Performing full reset
    pci 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0080
    pci 0000:00:1d.2: Performing full reset
    pci 0000:01:00.0: Boot video device
    pcieport-driver 0000:00:01.0: setting latency timer to 64
    pcieport-driver 0000:00:01.0: found MSI capability
    pcieport-driver 0000:00:01.0: irq 319 for MSI/MSI-X
    pci_express 0000:00:01.0:pcie00: allocate port service
    pci_express 0000:00:01.0:pcie02: allocate port service
    pci_express 0000:00:01.0:pcie03: allocate port service
    pcieport-driver 0000:00:1c.0: setting latency timer to 64
    pcieport-driver 0000:00:1c.0: found MSI capability
    pcieport-driver 0000:00:1c.0: irq 318 for MSI/MSI-X
    pci_express 0000:00:1c.0:pcie00: allocate port service
    pci_express 0000:00:1c.0:pcie02: allocate port service
    pci_express 0000:00:1c.0:pcie03: allocate port service
    pcieport-driver 0000:00:1c.1: setting latency timer to 64
    pcieport-driver 0000:00:1c.1: found MSI capability
    pcieport-driver 0000:00:1c.1: irq 317 for MSI/MSI-X
    pci_express 0000:00:1c.1:pcie00: allocate port service
    pci_express 0000:00:1c.1:pcie02: allocate port service
    pci_express 0000:00:1c.1:pcie03: allocate port service
    pcieport-driver 0000:00:1c.3: setting latency timer to 64
    pcieport-driver 0000:00:1c.3: found MSI capability
    pcieport-driver 0000:00:1c.3: irq 316 for MSI/MSI-X
    pci_express 0000:00:1c.3:pcie00: allocate port service
    pci_express 0000:00:1c.3:pcie02: allocate port service
    pci_express 0000:00:1c.3:pcie03: allocate port service
    pcieport-driver 0000:00:1c.5: setting latency timer to 64
    pcieport-driver 0000:00:1c.5: found MSI capability
    pcieport-driver 0000:00:1c.5: irq 315 for MSI/MSI-X
    pci_express 0000:00:1c.5:pcie00: allocate port service
    pci_express 0000:00:1c.5:pcie02: allocate port service
    pci_express 0000:00:1c.5:pcie03: allocate port service
    nvidiafb 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    nvidiafb: Device ID: 10de042b
    nvidiafb: unknown NV_ARCH
    ACPI: AC Adapter [AC] (on-line)
    ACPI Warning (nspredef-0858): \_SB_.BAT0._BIF: Return Package type mismatch at index 9 - found Buffer, expected String [20080926]
    ACPI: Battery Slot [BAT0] (battery present)
    ACPI: Battery Slot [BAT1] (battery absent)
    input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
    ACPI: Lid Switch [LID]
    input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
    ACPI: Power Button (CM) [PBTN]
    input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
    ACPI: Sleep Button (CM) [SBTN]
    input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:31/device:32/input/input3
    ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
    input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:37/input/input4
    ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
    ACPI Warning (nspredef-0357): \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) [20080926]
    input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:3c/input/input5
    ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
    ACPI: SSDT 7FE5C538, 0244 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
    ACPI: SSDT 7FE5BECE, 05E5 (r1 PmRef Cpu0Cst 3001 INTL 20050624)
    Monitor-Mwait will be used to enter C-1 state
    Monitor-Mwait will be used to enter C-2 state
    Monitor-Mwait will be used to enter C-3 state
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    processor ACPI0007:00: registered as cooling_device0
    ACPI: Processor [CPU0] (supports 8 throttling states)
    ACPI: SSDT 7FE5C77C, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
    ACPI: SSDT 7FE5C4B3, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
    ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
    processor ACPI0007:01: registered as cooling_device1
    ACPI: Processor [CPU1] (supports 8 throttling states)
    thermal LNXTHERM:01: registered as thermal_zone0
    ACPI: Thermal Zone [THM] (25 C)
    i8k: unable to get SMM BIOS version
    Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal Zotto (dz@debian.org)
    Linux agpgart interface v0.103
    ipmi message handler version 39.2
    Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
    Hangcheck: Using get_cycles().
    Serial: 8250/16550 driver4 ports, IRQ sharing enabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    brd: module loaded
    loop: module loaded
    Ethernet Channel Bonding Driver: v3.3.0 (June 10, 2008)
    bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details.
    tg3.c:v3.94 (August 14, 2008)
    tg3 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    tg3 0000:09:00.0: setting latency timer to 64
    eth0: Tigon3 [partno(BCM95755m) rev a002 PHY(5755)] (PCI Express) 10/100/1000Base-T Ethernet 00:1c:23:9f:6f:17
    eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
    eth0: dma_rwctrl[76180000] dma_mask[64-bit]
    PPP generic driver version 2.4.2
    PPP Deflate Compression module registered
    PPP BSD Compression module registered
    PPP MPPE Compression module registered
    NET: Registered protocol family 24
    PPPoL2TP kernel driver, V1.0
    SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
    CSLIP: code copyright 1989 Regents of the University of California.
    SLIP linefill/keepalive option.
    tun: Universal TUN/TAP device driver, 1.6
    tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
    iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26kds
    iwl3945: Copyright(c) 2003-2008 Intel Corporation
    iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    iwl3945 0000:0c:00.0: setting latency timer to 64
    iwl3945: Detected Intel Wireless WiFi Link 3945ABG
    iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
    phy0: Selected rate control algorithm 'iwl-3945-rs'
    iwl3945 0000:0c:00.0: PCI INT A disabled
    console [netcon0] enabled
    netconsole: network logging started
    Linux video capture interface: v2.00
    Uniform Multi-Platform E-IDE driver
    piix 0000:00:1f.1: IDE controller (0x8086:0x2850 rev 0x02)
    pci 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    piix 0000:00:1f.1: IDE port disabled
    piix 0000:00:1f.1: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x6fa0-0x6fa7
    Probing IDE interface ide0...
    hda: TSSTcorp DVD+/-RW TS-L632D, ATAPI CD/DVD-ROM drive
    hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
    hda: UDMA/33 mode selected
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
    ide-gd driver 1.18
    ide-cd driver 5.00
    ide-cd: hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
    Uniform CD-ROM driver Revision: 3.20
    Driver 'sd' needs updating - please use bus_type methods
    Driver 'sr' needs updating - please use bus_type methods
    ahci 0000:00:1f.2: version 3.0
    ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    ahci 0000:00:1f.2: irq 314 for MSI/MSI-X
    ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode
    ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems
    ahci 0000:00:1f.2: setting latency timer to 64
    scsi0 : ahci
    scsi1 : ahci
    scsi2 : ahci
    ata1: SATA max UDMA/133 abar m2048@0xf6ffb800 port 0xf6ffb900 irq 314
    ata2: DUMMY
    ata3: SATA max UDMA/133 abar m2048@0xf6ffb800 port 0xf6ffba00 irq 314
    ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    ata1.00: ATA-8: Hitachi HTS722080K9A300, DCBOC54P, max UDMA/133
    ata1.00: 156301488 sectors, multi 8: LBA48 NCQ (depth 31/32)
    ata1.00: configured for UDMA/133
    ata3: SATA link down (SStatus 0 SControl 300)
    scsi 0:0:0:0: Direct-Access ATA Hitachi HTS72208 DCBO PQ: 0 ANSI: 5
    sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 >
    sd 0:0:0:0: [sda] Attached SCSI disk
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    firewire_ohci 0000:03:01.4: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    firewire_ohci: Added fw-ohci device 0000:03:01.4, OHCI version 1.10
    yenta_cardbus 0000:03:01.0: CardBus bridge found [1028:01fe]
    yenta_cardbus 0000:03:01.0: O2: res at 0x94/0xD4: 00/ea
    yenta_cardbus 0000:03:01.0: O2: enabling read prefetch/write burst
    yenta_cardbus 0000:03:01.0: ISA IRQ mask 0x0cb8, PCI irq 19
    yenta_cardbus 0000:03:01.0: Socket status: 30000006
    pci_bus 0000:03: Raising subordinate bus# of parent bus (#03) from #04 to #07
    yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
    yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge Memory window: 0xf1a00000 - 0xf1afffff
    yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96
    ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
    ehci_hcd 0000:00:1a.7: setting latency timer to 64
    ehci_hcd 0000:00:1a.7: EHCI Host Controller
    drivers/usb/core/inode.c: creating file 'devices'
    drivers/usb/core/inode.c: creating file '001'
    ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:1a.7: reset hcs_params 0x102204 dbg=1 cc=2 pcc=2 ordered !ppc ports=4
    ehci_hcd 0000:00:1a.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
    ehci_hcd 0000:00:1a.7: reset command 000002 (park)=0 ithresh=0 period=1024 Reset HALT
    ehci_hcd 0000:00:1a.7: debug port 1
    ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
    ehci_hcd 0000:00:1a.7: supports USB remote wakeup
    ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
    ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
    ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
    ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    usb usb1: default language 0x0409
    usb usb1: uevent
    usb usb1: usb_probe_device
    usb usb1: configuration #1 chosen from 1 choice
    usb usb1: adding 1-0:1.0 (config #1, interface 0)
    usb 1-0:1.0: uevent
    hub 1-0:1.0: usb_probe_interface
    hub 1-0:1.0: usb_probe_interface - got id
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 4 ports detected
    hub 1-0:1.0: standalone hub
    hub 1-0:1.0: no power switching (usb 1.0)
    hub 1-0:1.0: individual port over-current protection
    hub 1-0:1.0: power on to power good time: 20ms
    hub 1-0:1.0: local power source is good
    hub 1-0:1.0: trying to enable port power on non-switchable hub
    drivers/usb/core/inode.c: creating file '001'
    usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb1: Product: EHCI Host Controller
    usb usb1: Manufacturer: Linux 2.6.28-rc2-hh1 ehci_hcd
    usb usb1: SerialNumber: 0000:00:1a.7
    ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    ehci_hcd 0000:00:1d.7: setting latency timer to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    drivers/usb/core/inode.c: creating file '002'
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
    ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
    ehci_hcd 0000:00:1d.7: reset command 000002 (park)=0 ithresh=0 period=1024 Reset HALT
    ehci_hcd 0000:00:1d.7: debug port 1
    ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    ehci_hcd 0000:00:1d.7: supports USB remote wakeup
    ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
    ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
    ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    usb usb2: default language 0x0409
    usb usb2: uevent
    usb usb2: usb_probe_device
    usb usb2: configuration #1 chosen from 1 choice
    usb usb2: adding 2-0:1.0 (config #1, interface 0)
    usb 2-0:1.0: uevent
    hub 2-0:1.0: usb_probe_interface
    hub 2-0:1.0: usb_probe_interface - got id
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 6 ports detected
    hub 2-0:1.0: standalone hub
    hub 2-0:1.0: no power switching (usb 1.0)
    hub 2-0:1.0: individual port over-current protection
    hub 2-0:1.0: power on to power good time: 20ms
    hub 2-0:1.0: local power source is good
    hub 2-0:1.0: trying to enable port power on non-switchable hub
    drivers/usb/core/inode.c: creating file '001'
    usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
    usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb2: Product: EHCI Host Controller
    usb usb2: Manufacturer: Linux 2.6.28-rc2-hh1 ehci_hcd
    usb usb2: SerialNumber: 0000:00:1d.7
    uhci_hcd: USB Universal Host Controller Interface driver
    uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    uhci_hcd 0000:00:1a.0: setting latency timer to 64
    uhci_hcd 0000:00:1a.0: UHCI Host Controller
    drivers/usb/core/inode.c: creating file '003'
    uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1a.0: detected 2 ports
    uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
    uhci_hcd 0000:00:1a.0: Performing full reset
    uhci_hcd 0000:00:1a.0: supports USB remote wakeup
    uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
    usb usb3: default language 0x0409
    usb usb3: uevent
    usb usb3: usb_probe_device
    usb usb3: configuration #1 chosen from 1 choice
    usb usb3: adding 3-0:1.0 (config #1, interface 0)
    usb 3-0:1.0: uevent
    hub 3-0:1.0: usb_probe_interface
    hub 3-0:1.0: usb_probe_interface - got id
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    hub 3-0:1.0: standalone hub
    hub 3-0:1.0: no power switching (usb 1.0)
    hub 3-0:1.0: individual port over-current protection
    hub 3-0:1.0: power on to power good time: 2ms
    hub 3-0:1.0: local power source is good
    hub 3-0:1.0: trying to enable port power on non-switchable hub
    drivers/usb/core/inode.c: creating file '001'
    usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb3: Product: UHCI Host Controller
    usb usb3: Manufacturer: Linux 2.6.28-rc2-hh1 uhci_hcd
    usb usb3: SerialNumber: 0000:00:1a.0
    uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    uhci_hcd 0000:00:1a.1: setting latency timer to 64
    uhci_hcd 0000:00:1a.1: UHCI Host Controller
    drivers/usb/core/inode.c: creating file '004'
    uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1a.1: detected 2 ports
    uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
    uhci_hcd 0000:00:1a.1: Performing full reset
    uhci_hcd 0000:00:1a.1: supports USB remote wakeup
    uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
    usb usb4: default language 0x0409
    usb usb4: uevent
    usb usb4: usb_probe_device
    usb usb4: configuration #1 chosen from 1 choice
    usb usb4: adding 4-0:1.0 (config #1, interface 0)
    usb 4-0:1.0: uevent
    hub 4-0:1.0: usb_probe_interface
    hub 4-0:1.0: usb_probe_interface - got id
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    hub 4-0:1.0: standalone hub
    hub 4-0:1.0: no power switching (usb 1.0)
    hub 4-0:1.0: individual port over-current protection
    hub 4-0:1.0: power on to power good time: 2ms
    hub 4-0:1.0: local power source is good
    hub 4-0:1.0: trying to enable port power on non-switchable hub
    drivers/usb/core/inode.c: creating file '001'
    usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb4: Product: UHCI Host Controller
    usb usb4: Manufacturer: Linux 2.6.28-rc2-hh1 uhci_hcd
    usb usb4: SerialNumber: 0000:00:1a.1
    uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    uhci_hcd 0000:00:1d.0: setting latency timer to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    drivers/usb/core/inode.c: creating file '005'
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:1d.0: detected 2 ports
    uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
    uhci_hcd 0000:00:1d.0: Performing full reset
    uhci_hcd 0000:00:1d.0: supports USB remote wakeup
    uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
    usb usb5: default language 0x0409
    usb usb5: uevent
    usb usb5: usb_probe_device
    usb usb5: configuration #1 chosen from 1 choice
    usb usb5: adding 5-0:1.0 (config #1, interface 0)
    usb 5-0:1.0: uevent
    hub 5-0:1.0: usb_probe_interface
    hub 5-0:1.0: usb_probe_interface - got id
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    hub 5-0:1.0: standalone hub
    hub 5-0:1.0: no power switching (usb 1.0)
    hub 5-0:1.0: individual port over-current protection
    hub 5-0:1.0: power on to power good time: 2ms
    hub 5-0:1.0: local power source is good
    hub 5-0:1.0: trying to enable port power on non-switchable hub
    drivers/usb/core/inode.c: creating file '001'
    usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb5: Product: UHCI Host Controller
    usb usb5: Manufacturer: Linux 2.6.28-rc2-hh1 uhci_hcd
    usb usb5: SerialNumber: 0000:00:1d.0
    uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    uhci_hcd 0000:00:1d.1: setting latency timer to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    drivers/usb/core/inode.c: creating file '006'
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
    uhci_hcd 0000:00:1d.1: detected 2 ports
    uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
    uhci_hcd 0000:00:1d.1: Performing full reset
    uhci_hcd 0000:00:1d.1: supports USB remote wakeup
    uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
    usb usb6: default language 0x0409
    usb usb6: uevent
    usb usb6: usb_probe_device
    usb usb6: configuration #1 chosen from 1 choice
    usb usb6: adding 6-0:1.0 (config #1, interface 0)
    usb 6-0:1.0: uevent
    hub 6-0:1.0: usb_probe_interface
    hub 6-0:1.0: usb_probe_interface - got id
    hub 6-0:1.0: USB hub found
    hub 6-0:1.0: 2 ports detected
    hub 6-0:1.0: standalone hub
    hub 6-0:1.0: no power switching (usb 1.0)
    hub 6-0:1.0: individual port over-current protection
    hub 6-0:1.0: power on to power good time: 2ms
    hub 6-0:1.0: local power source is good
    hub 6-0:1.0: trying to enable port power on non-switchable hub
    drivers/usb/core/inode.c: creating file '001'
    usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb6: Product: UHCI Host Controller
    usb usb6: Manufacturer: Linux 2.6.28-rc2-hh1 uhci_hcd
    usb usb6: SerialNumber: 0000:00:1d.1
    uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
    uhci_hcd 0000:00:1d.2: setting latency timer to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    drivers/usb/core/inode.c: creating file '007'
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
    uhci_hcd 0000:00:1d.2: detected 2 ports
    uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
    uhci_hcd 0000:00:1d.2: Performing full reset
    uhci_hcd 0000:00:1d.2: supports USB remote wakeup
    uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
    usb usb7: default language 0x0409
    usb usb7: uevent
    usb usb7: usb_probe_device
    usb usb7: configuration #1 chosen from 1 choice
    usb usb7: adding 7-0:1.0 (config #1, interface 0)
    usb 7-0:1.0: uevent
    hub 7-0:1.0: usb_probe_interface
    hub 7-0:1.0: usb_probe_interface - got id
    hub 7-0:1.0: USB hub found
    hub 7-0:1.0: 2 ports detected
    hub 7-0:1.0: standalone hub
    hub 7-0:1.0: no power switching (usb 1.0)
    hub 7-0:1.0: individual port over-current protection
    hub 7-0:1.0: power on to power good time: 2ms
    hub 7-0:1.0: local power source is good
    hub 7-0:1.0: trying to enable port power on non-switchable hub
    drivers/usb/core/inode.c: creating file '001'
    usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb7: Product: UHCI Host Controller
    usb usb7: Manufacturer: Linux 2.6.28-rc2-hh1 uhci_hcd
    usb usb7: SerialNumber: 0000:00:1d.2
    usbcore: registered new interface driver wusb-cbaf
    usbcore: registered new interface driver usblp
    Initializing USB Mass Storage driver...
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    rtc_cmos 00:03: RTC can wake from S4
    rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k, 114 bytes nvram, , hpet irqs irqs
    i2c /dev entries driver
    i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
    iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
    iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    cpuidle: using governor ladder
    cpuidle: using governor menu
    Marking TSC unstable due to TSC halts in idle
    dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
    Driver for HIFN 795x crypto accelerator chip has been successfully registered.
    dca service started, version 1.4
    input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input6
    usbcore: registered new interface driver hiddev
    usbcore: registered new interface driver usbhid
    usbhid: v2.6:USB HID core driver
    Advanced Linux Sound Architecture Driver Version 1.0.18rc3.
    HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
    HDA Intel 0000:00:1b.0: setting latency timer to 64
    ehci_hcd 0000:00:1a.7: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT
    hub 1-0:1.0: port 2: status 0501 change 0001
    ehci_hcd 0000:00:1d.7: GetStatus port 5 status 001803 POWER sig=j CSC CONNECT
    hub 2-0:1.0: port 5: status 0501 change 0001
    uhci_hcd 0000:00:1a.0: port 2 portsc 008a,00
    hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
    hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
    uhci_hcd 0000:00:1d.2: port 1 portsc 008a,00
    hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
    hub 2-0:1.0: state 7 ports 6 chg 0020 evt 0000
    hub 2-0:1.0: port 5, status 0501, change 0000, 480 Mb/s
    ehci_hcd 0000:00:1d.7: port 5 full speed --> companion
    ehci_hcd 0000:00:1d.7: GetStatus port 5 status 003801 POWER OWNER sig=j CONNECT
    hub 2-0:1.0: port 5 not reset yet, waiting 50ms
    ALSA device list:
    #0: HDA Intel at 0xf6ffc000 irq 21
    NET: Registered protocol family 26
    Netfilter messages via NETLINK v0.30.
    nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
    CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
    nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
    sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
    ctnetlink v0.93: registering with nfnetlink.
    IPv4 over IPv4 tunneling driver
    GRE over IPv4 tunneling driver
    TCP bic registered
    TCP westwood registered
    Initializing XFRM netlink socket
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    tunl0: Disabled Privacy Extensions
    NET: Registered protocol family 17
    NET: Registered protocol family 15
    Bridge firewalling registered
    Ebtables v2.0 registered
    NET: Registered protocol family 35
    802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
    All bugs added by David S. Miller <davem@redhat.com>
    ehci_hcd 0000:00:1d.7: GetStatus port 5 status 003002 POWER OWNER sig=se0 CSC
    hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
    hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
    hub 1-0:1.0: state 7 ports 4 chg 0004 evt 0000
    hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
    CCID: Registered CCID 2 (TCP-like)
    SCTP: Hash tables configured (established 65536 bind 65536)
    Clocksource tsc unstable (delta = -163564522 ns)
    TIPC: Activated (version 1.6.4 compiled Oct 27 2008 12:45:44)
    NET: Registered protocol family 30
    TIPC: Started in single node mode
    rtc_cmos 00:03: setting system clock to 2008-10-29 09:35:35 UTC (1225272935)
    firewire_core: created device fw0: GUID 464fc0000e451870, S400
    ehci_hcd 0000:00:1a.7: port 2 full speed --> companion
    ehci_hcd 0000:00:1a.7: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT
    hub 1-0:1.0: port 2 not reset yet, waiting 50ms
    ehci_hcd 0000:00:1a.7: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC
    hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0020
    hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0004
    hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0004
    uhci_hcd 0000:00:1a.0: port 2 portsc 0093,00
    hub 3-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
    hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
    usb 3-2: new full speed USB device using uhci_hcd and address 2
    input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input7
    usb 3-2: skipped 1 descriptor after interface
    usb 3-2: uevent
    usb 3-2: usb_probe_device
    usb 3-2: configuration #1 chosen from 1 choice
    usb 3-2: adding 3-2:1.0 (config #1, interface 0)
    usb 3-2:1.0: uevent
    usb 3-2: adding 3-2:1.1 (config #1, interface 1)
    usb 3-2:1.1: uevent
    usb 3-2: adding 3-2:1.2 (config #1, interface 2)
    usb 3-2:1.2: uevent
    drivers/usb/core/inode.c: creating file '002'
    usb 3-2: New USB device found, idVendor=413c, idProduct=8140
    usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0002
    uhci_hcd 0000:00:1d.2: port 1 portsc 0093,00
    hub 7-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
    input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input8
    hub 7-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    VFS: Mounted root (ext3 filesystem) readonly.
    Freeing unused kernel memory: 516k freed
    Write protecting the kernel read-only data: 6824k
    usb 7-1: new full speed USB device using uhci_hcd and address 2
    usb usb4: suspend_rh (auto-stop)
    usb usb5: suspend_rh (auto-stop)
    usb usb6: suspend_rh (auto-stop)
    usb 7-1: ep0 maxpacket = 8
    usb 7-1: uevent
    usb 7-1: usb_probe_device
    usb 7-1: configuration #1 chosen from 1 choice
    usb 7-1: adding 7-1:1.0 (config #1, interface 0)
    usb 7-1:1.0: uevent
    hub 7-1:1.0: usb_probe_interface
    hub 7-1:1.0: usb_probe_interface - got id
    hub 7-1:1.0: USB hub found
    hub 7-1:1.0: 4 ports detected
    hub 7-1:1.0: compound device; port removable status: RFRR
    hub 7-1:1.0: individual port power switching
    hub 7-1:1.0: individual port over-current protection
    hub 7-1:1.0: power on to power good time: 100ms
    hub 7-1:1.0: local power source is lost (inactive)
    hub 7-1:1.0: enabling power on all ports
    drivers/usb/core/inode.c: creating file '002'
    usb 7-1: New USB device found, idVendor=0b97, idProduct=7761
    usb 7-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0004
    hub 7-1:1.0: port 2: status 0101 change 0001
    uhci_hcd 0000:00:1d.2: reserve dev 2 ep81-INT, period 128, phase 0, 12 us
    hub 7-1:1.0: state 7 ports 4 chg 0004 evt 0000
    hub 7-1:1.0: port 2, status 0101, change 0000, 12 Mb/s
    usb 7-1.2: new full speed USB device using uhci_hcd and address 3
    usb 7-1.2: skipped 1 descriptor after endpoint
    usb 7-1.2: default language 0x0409
    usb 7-1.2: uevent
    usb 7-1.2: usb_probe_device
    usb 7-1.2: configuration #1 chosen from 1 choice
    usb 7-1.2: adding 7-1.2:1.0 (config #1, interface 0)
    usb 7-1.2:1.0: uevent
    drivers/usb/core/inode.c: creating file '003'
    usb 7-1.2: New USB device found, idVendor=0b97, idProduct=7772
    usb 7-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    usb 7-1.2: Product: O2Micro CCID SC Reader
    usb 7-1.2: Manufacturer: O2
    hub 7-1:1.0: state 7 ports 4 chg 0000 evt 0004
    hub 4-0:1.0: hub_suspend
    usb usb4: bus auto-suspend
    usb usb4: suspend_rh
    hub 5-0:1.0: hub_suspend
    usb usb5: bus auto-suspend
    usb usb5: suspend_rh
    hub 6-0:1.0: hub_suspend
    usb usb6: bus auto-suspend
    usb usb6: suspend_rh
    usb usb3: uevent
    usb 3-0:1.0: uevent
    usb 3-2: uevent
    usb 3-2:1.0: uevent
    usb 3-2:1.1: uevent
    usb 3-2:1.2: uevent
    usb usb4: uevent
    usb 4-0:1.0: uevent
    usb usb1: uevent
    usb 1-0:1.0: uevent
    usb usb5: uevent
    usb 5-0:1.0: uevent
    usb usb6: uevent
    usb 6-0:1.0: uevent
    usb usb7: uevent
    usb 7-0:1.0: uevent
    usb 7-1: uevent
    usb 7-1.2: uevent
    usb 7-1.2:1.0: uevent
    usb 7-1:1.0: uevent
    usb usb2: uevent
    usb 2-0:1.0: uevent
    hub 2-0:1.0: hub_suspend
    usb usb2: bus auto-suspend
    ehci_hcd 0000:00:1d.7: suspend root hub
    hub 1-0:1.0: hub_suspend
    usb usb1: bus auto-suspend
    ehci_hcd 0000:00:1a.7: suspend root hub
    Bluetooth: Generic Bluetooth USB driver ver 0.3
    btusb 3-2:1.0: usb_probe_interface
    btusb 3-2:1.0: usb_probe_interface - got id
    btusb 3-2:1.2: usb_probe_interface
    btusb 3-2:1.2: usb_probe_interface - got id
    usbcore: registered new interface driver btusb
    loadkeys[1941]: segfault at 5a0 ip 00007f436874caf9 sp 00007fff70f7dd98 error 4 in libconsole.so.0.0.0[7f436873a000+19000]
    Adding 3903752k swap on /dev/sda7. Priority:-1 extents:1 across:3903752k
    EXT3 FS on sda2, internal journal
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on sda9, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on sda8, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on sda5, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on sda6, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    CPU0 attaching NULL sched-domain.
    CPU1 attaching NULL sched-domain.
    CPU0 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 0 1
    domain 1: span 0-1 level CPU
    groups: 0-1
    CPU1 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 1 0
    domain 1: span 0-1 level CPU
    groups: 0-1
    drm: disagrees about version of symbol struct_module
    nouveau: disagrees about version of symbol struct_module
    iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    iwl3945 0000:0c:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
    iwl3945 0000:0c:00.0: irq 313 for MSI/MSI-X
    iwl3945 0000:0c:00.0: firmware: requesting iwlwifi-3945-1.ucode
    Registered led device: iwl-phy0:radio
    Registered led device: iwl-phy0:assoc
    Registered led device: iwl-phy0:RX
    Registered led device: iwl-phy0:TX
    ADDRCONF(NETDEV_UP): wlan0: link is not ready
    tg3 0000:09:00.0: irq 312 for MSI/MSI-X
    ADDRCONF(NETDEV_UP): eth0: link is not ready
    tg3: eth0: Link is up at 100 Mbps, full duplex.
    tg3: eth0: Flow control is on for TX and on for RX.
    ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    warning: `ntpd' uses 32-bit capabilities (legacy support in use)
    wlan0: authenticate with AP 00:14:1b:5a:13:40
    wlan0: authenticated
    wlan0: associate with AP 00:14:1b:5a:13:40
    wlan0: RX AssocResp from 00:14:1b:5a:13:40 (capab=0x431 status=0 aid=67)
    wlan0: associated
    ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    mtrr: base(0xe0000000) is not aligned on a size(0x7f00000) boundary
    eth0: no IPv6 routers present
    wlan0: no IPv6 routers present
    npviewer.bin[3518]: segfault at f5c29030 ip 00000000f79524c0 sp 00000000ffee7b8c error 4 in libpthread-2.7.so[f794b000+13000]
    npviewer.bin[3550]: segfault at f5c07030 ip 00000000f79304c0 sp 00000000ff8c756c error 4 in libpthread-2.7.so[f7929000+13000]
    npviewer.bin[3664]: segfault at f5c14030 ip 00000000f793d4c0 sp 00000000ffbd307c error 4 in libpthread-2.7.so[f7936000+13000]
    npviewer.bin[3707]: segfault at f5b94030 ip 00000000f78bd4c0 sp 00000000ff8524fc error 4 in libpthread-2.7.so[f78b6000+13000]
    npviewer.bin[3819]: segfault at f5bff030 ip 00000000f79284c0 sp 00000000fffbfc6c error 4 in libpthread-2.7.so[f7921000+13000]
    npviewer.bin[3969]: segfault at f5c0b030 ip 00000000f79344c0 sp 00000000ff9cbe6c error 4 in libpthread-2.7.so[f792d000+13000]
    npviewer.bin[4132]: segfault at f5bdd030 ip 00000000f79064c0 sp 00000000ffe9bb4c error 4 in libpthread-2.7.so[f78ff000+13000]
    npviewer.bin[4413]: segfault at f5bd2030 ip 00000000f78fb4c0 sp 00000000fff92c3c error 4 in libpthread-2.7.so[f78f4000+13000]
    npviewer.bin[4493]: segfault at f5b65030 ip 00000000f788e4c0 sp 00000000ffe242cc error 4 in libpthread-2.7.so[f7887000+13000]
    npviewer.bin[4641]: segfault at f5c07030 ip 00000000f79304c0 sp 00000000fffc5c6c error 4 in libpthread-2.7.so[f7929000+13000]
    npviewer.bin[4660]: segfault at f5ba2030 ip 00000000f78cb4c0 sp 00000000ffa62f0c error 4 in libpthread-2.7.so[f78c4000+13000]
    npviewer.bin[4692]: segfault at f5b45030 ip 00000000f786e4c0 sp 00000000ffd061ac error 4 in libpthread-2.7.so[f7867000+13000]
    npviewer.bin[4792]: segfault at f5b47030 ip 00000000f78704c0 sp 00000000ffe082ac error 4 in libpthread-2.7.so[f7869000+13000]
    npviewer.bin[4824]: segfault at f5bf8030 ip 00000000f79214c0 sp 00000000ff8b655c error 4 in libpthread-2.7.so[f791a000+13000]
    npviewer.bin[5137]: segfault at f5b8c030 ip 00000000f78b54c0 sp 00000000ffb4c7ec error 4 in libpthread-2.7.so[f78ae000+13000]
    npviewer.bin[5154]: segfault at f5be3030 ip 00000000f790c4c0 sp 00000000ffca394c error 4 in libpthread-2.7.so[f7905000+13000]
    npviewer.bin[5234]: segfault at f5b4d030 ip 00000000f78764c0 sp 00000000ffe0babc error 4 in libpthread-2.7.so[f786f000+13000]
    npviewer.bin[5531]: segfault at f5bb4030 ip 00000000f78dd4c0 sp 00000000ff97261c error 4 in libpthread-2.7.so[f78d6000+13000]
    npviewer.bin[5901]: segfault at f5bba030 ip 00000000f78e34c0 sp 00000000ffb7901c error 4 in libpthread-2.7.so[f78dc000+13000]
    npviewer.bin[6064]: segfault at f5b94030 ip 00000000f78bd4c0 sp 00000000ff854cfc error 4 in libpthread-2.7.so[f78b6000+13000]
    npviewer.bin[6132]: segfault at f5c11030 ip 00000000f793a4c0 sp 00000000ffad177c error 4 in libpthread-2.7.so[f7933000+13000]
    npviewer.bin[6164]: segfault at f5c04030 ip 00000000f792d4c0 sp 00000000ffcc496c error 4 in libpthread-2.7.so[f7926000+13000]
    npviewer.bin[6263]: segfault at f5bfc030 ip 00000000f79254c0 sp 00000000ff9bae5c error 4 in libpthread-2.7.so[f791e000+13000]
    npviewer.bin[6312]: segfault at f5b3e030 ip 00000000f78674c0 sp 00000000ffcfc9ac error 4 in libpthread-2.7.so[f7860000+13000]
    npviewer.bin[6344]: segfault at f5bda030 ip 00000000f79034c0 sp 00000000ffe9933c error 4 in libpthread-2.7.so[f78fc000+13000]
    npviewer.bin[6526]: segfault at f5b97030 ip 00000000f78c04c0 sp 00000000ff857cfc error 4 in libpthread-2.7.so[f78b9000+13000]
    npviewer.bin[6593]: segfault at f5ba5030 ip 00000000f78ce4c0 sp 00000000ffe65b0c error 4 in libpthread-2.7.so[f78c7000+13000]
    npviewer.bin[6722]: segfault at f5b8f030 ip 00000000f78b84c0 sp 00000000ffa4f6fc error 4 in libpthread-2.7.so[f78b1000+13000]
    npviewer.bin[6738]: segfault at f5b3f030 ip 00000000f78684c0 sp 00000000ffafffac error 4 in libpthread-2.7.so[f7861000+13000]
    npviewer.bin[6838]: segfault at f5bb8030 ip 00000000f78e14c0 sp 00000000ff97661c error 4 in libpthread-2.7.so[f78da000+13000]
    npviewer.bin[6906]: segfault at f5c39030 ip 00000000f79624c0 sp 00000000ffef9b9c error 4 in libpthread-2.7.so[f795b000+13000]
    npviewer.bin[7074]: segfault at f5b46030 ip 00000000f786f4c0 sp 00000000ffa06eac error 4 in libpthread-2.7.so[f7868000+13000]
    npviewer.bin[7220]: segfault at f5b74030 ip 00000000f789d4c0 sp 00000000ffc348dc error 4 in libpthread-2.7.so[f7896000+13000]
    npviewer.bin[7432]: segfault at f5bd3030 ip 00000000f78fc4c0 sp 00000000ff99363c error 4 in libpthread-2.7.so[f78f5000+13000]
    npviewer.bin[7499]: segfault at f5b4b030 ip 00000000f78744c0 sp 00000000ffb0b7ac error 4 in libpthread-2.7.so[f786d000+13000]
    npviewer.bin[7648]: segfault at f5bd5030 ip 00000000f78fe4c0 sp 00000000ff99363c error 4 in libpthread-2.7.so[f78f7000+13000]
    npviewer.bin[7794]: segfault at f5b60030 ip 00000000f78894c0 sp 00000000ffa206cc error 4 in libpthread-2.7.so[f7882000+13000]
    npviewer.bin[7924]: segfault at f5be8030 ip 00000000f79114c0 sp 00000000ffba704c error 4 in libpthread-2.7.so[f790a000+13000]
    npviewer.bin[8021]: segfault at f5b93030 ip 00000000f78bc4c0 sp 00000000ffe542fc error 4 in libpthread-2.7.so[f78b5000+13000]
    npviewer.bin[8145]: segfault at 2c ip 00000000f6bbc31a sp 00000000ffb48d40 error 4 in libflashplayer.so[f6b82000+778000]
    npviewer.bin[8196]: segfault at f5bf2030 ip 00000000f791b4c0 sp 00000000ff9b265c error 4 in libpthread-2.7.so[f7914000+13000]
    usb usb2: usb resume
    ehci_hcd 0000:00:1d.7: resume root hub
    hub 2-0:1.0: hub_resume
    ehci_hcd 0000:00:1d.7: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT
    hub 2-0:1.0: port 2: status 0501 change 0001
    hub 2-0:1.0: state 7 ports 6 chg 0004 evt 0000
    hub 2-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
    ehci_hcd 0000:00:1d.7: port 2 full speed --> companion
    ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT
    hub 2-0:1.0: port 2 not reset yet, waiting 50ms
    usb usb5: usb resume
    usb usb5: wakeup_rh
    hub 5-0:1.0: hub_resume
    uhci_hcd 0000:00:1d.0: port 2 portsc 0093,00
    hub 5-0:1.0: port 2: status 0101 change 0001
    ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC
    hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0004
    hub 5-0:1.0: state 7 ports 2 chg 0004 evt 0000
    hub 5-0:1.0: port 2, status 0101, change 0000, 12 Mb/s
    usb 5-2: new full speed USB device using uhci_hcd and address 2
    usb 5-2: default language 0x0409
    usb 5-2: uevent
    usb 5-2: usb_probe_device
    usb 5-2: configuration #1 chosen from 1 choice
    usb 5-2: adding 5-2:1.0 (config #1, interface 0)
    usb 5-2:1.0: uevent
    drivers/usb/core/inode.c: creating file '002'
    usb 5-2: New USB device found, idVendor=067b, idProduct=2303
    usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    usb 5-2: Product: USB-Serial Controller
    usb 5-2: Manufacturer: Prolific Technology Inc.
    usbcore: registered new interface driver usbserial
    USB Serial support registered for generic
    usbserial_generic 3-2:1.2: usb_probe_interface
    usbserial_generic 3-2:1.2: usb_probe_interface - got id
    usbserial_generic 7-1.2:1.0: usb_probe_interface
    usbserial_generic 7-1.2:1.0: usb_probe_interface - got id
    usbserial_generic 5-2:1.0: usb_probe_interface
    usbserial_generic 5-2:1.0: usb_probe_interface - got id
    usbcore: registered new interface driver usbserial_generic
    usbserial: USB Serial Driver core
    USB Serial support registered for pl2303
    pl2303 5-2:1.0: usb_probe_interface
    pl2303 5-2:1.0: usb_probe_interface - got id
    pl2303 5-2:1.0: pl2303 converter detected
    usb 5-2: pl2303 converter now attached to ttyUSB0
    usbcore: registered new interface driver pl2303
    pl2303: Prolific PL2303 USB to serial adaptor driver
    hub 2-0:1.0: hub_suspend
    usb usb2: bus auto-suspend
    ehci_hcd 0000:00:1d.7: suspend root hub
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 19 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 19 us
    hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0004
    uhci_hcd 0000:00:1d.0: port 2 portsc 008a,00
    hub 5-0:1.0: port 2, status 0100, change 0003, 12 Mb/s
    usb 5-2: USB disconnect, address 2
    usb 5-2: unregistering device
    usb 5-2: usb_disable_device nuking all URBs
    usb 5-2: unregistering interface 5-2:1.0
    pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0
    pl2303 5-2:1.0: device disconnected
    usb 5-2:1.0: uevent
    usb 5-2: uevent
    hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100
    usb usb5: suspend_rh (auto-stop)
    hub 5-0:1.0: hub_suspend
    usb usb5: bus auto-suspend
    usb usb5: suspend_rh
    usb usb2: usb resume
    ehci_hcd 0000:00:1d.7: resume root hub
    ehci_hcd 0000:00:1d.7: port 2 full speed --> companion
    ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT
    hub 2-0:1.0: hub_resume
    ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC
    usb usb5: usb resume
    usb usb5: wakeup_rh
    hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
    hub 5-0:1.0: hub_resume
    uhci_hcd 0000:00:1d.0: port 2 portsc 0093,00
    hub 5-0:1.0: port 2: status 0101 change 0001
    hub 5-0:1.0: state 7 ports 2 chg 0004 evt 0000
    hub 5-0:1.0: port 2, status 0101, change 0000, 12 Mb/s
    usb 5-2: new full speed USB device using uhci_hcd and address 3
    usb 5-2: default language 0x0409
    usb 5-2: uevent
    usb 5-2: usb_probe_device
    usb 5-2: configuration #1 chosen from 1 choice
    usb 5-2: adding 5-2:1.0 (config #1, interface 0)
    usb 5-2:1.0: uevent
    usbserial_generic 5-2:1.0: usb_probe_interface
    usbserial_generic 5-2:1.0: usb_probe_interface - got id
    pl2303 5-2:1.0: usb_probe_interface
    pl2303 5-2:1.0: usb_probe_interface - got id
    pl2303 5-2:1.0: pl2303 converter detected
    usb 5-2: pl2303 converter now attached to ttyUSB0
    drivers/usb/core/inode.c: creating file '003'
    usb 5-2: New USB device found, idVendor=067b, idProduct=2303
    usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    usb 5-2: Product: USB-Serial Controller
    usb 5-2: Manufacturer: Prolific Technology Inc.
    hub 2-0:1.0: hub_suspend
    usb usb2: bus auto-suspend
    ehci_hcd 0000:00:1d.7: suspend root hub
    \
     
     \ /
      Last update: 2008-10-29 13:31    [W:0.241 / U:29.756 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site