lkml.org 
[lkml]   [2008]   [Oct]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [2.6.28-rc2]: iwl4965 doesn't connect / cfg80211 failure
On Tue, 28 Oct 2008 13:23:34 +0800, Zhu Yi wrote:
> On Mon, 2008-10-27 at 22:32 -0600, Arjan van de Ven wrote:
> > I had this same issue
> >
> > turning on CONFIG_WIRELESS_OLD_REGULATORY fixed it for me....
>
> Arjan,
>
> This is a different bug. He has the wireless worked sometimes.
>
> I think your problem relates to 5GHz channel usage. We have already a
> patch queued to resolve the problem. We will have regulatory framework
> reworked to better solve the problem. But I guess it will be in .29 time
> frame.
>
> Thanks,
> -yi
I tested Arjan's solution nevertheless and it seems to do the job. I can't find
the "TX Power requested" line anymore on dmesg output with that config option
enabled anymore and it connects without problems.
This is how it looks now:
[ 777.680750] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux,1.3.27kds
[ 777.680753] iwlagn: Copyright(c) 2003-2008 Intel Corporation
[ 777.680878] iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 777.680908] iwlagn 0000:06:00.0: setting latency timer to 64
[ 777.680977] iwlagn: Detected Intel Wireless WiFi Link 4965AGN REV=0x4
[ 777.731255] iwlagn: Tunable channels: 13 802.11bg, 19 802.11a channels
[ 777.732432] phy1: Selected rate control algorithm 'iwl-agn-rs'
[ 781.764539] iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 781.764821] iwlagn 0000:06:00.0: irq 41 for MSI/MSI-X
[ 781.764919] iwlagn 0000:06:00.0: firmware: requesting iwlwifi-4965-2.ucode
[ 781.980719] Registered led device: iwl-phy1:radio
[ 781.980764] Registered led device: iwl-phy1:assoc
[ 781.980808] Registered led device: iwl-phy1:RX
[ 781.980856] Registered led device: iwl-phy1:TX
[ 782.014001] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 783.633713] wlan0: authenticate with AP 00:c0:a8:e5:e5:a5
[ 783.635637] wlan0: authenticated
[ 783.635644] wlan0: associate with AP 00:c0:a8:e5:e5:a5
[ 783.642770] wlan0: RX AssocResp from 00:c0:a8:e5:e5:a5 (capab=0x431 status=0
aid=1)
[ 783.642776] wlan0: associated [ 783.669684] ADDRCONF(NETDEV_CHANGE): wlan0:
link becomes ready

I tested it quickly and not very thoroughly on the wpa-eap encrypted network at
university and it showed the same behaviour: no connection without
CONFIG_WIRELESS_OLD_REGULATORY and no problems with it enabled.

Thanks
Mirco
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2008-10-28 17:27    [W:0.530 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site