lkml.org 
[lkml]   [2008]   [Oct]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subjectoops: unable to handle kernel paging request at ffffffff
Today's git (10.17), boot with this oops. I have no time to analyze it,
report it:

Here is the full dmesg:

[ 1.445579] system 00:07: ioport range 0xb00-0xbfe has been reserved
[ 1.445652] system 00:07: ioport range 0xc80-0xcaf has been reserved
[ 1.445725] system 00:07: ioport range 0xcb0-0xcbf has been reserved
[ 1.445798] system 00:07: ioport range 0xcc0-0xcf7 has been reserved
[ 1.445870] system 00:07: ioport range 0xd00-0xdfe has been reserved
[ 1.445943] system 00:07: ioport range 0xe00-0xefe has been reserved
[ 1.446018] system 00:07: ioport range 0xf00-0xffe has been reserved
[ 1.446092] system 00:07: ioport range 0x2000-0x20fe has been reserved
[ 1.446177] system 00:07: ioport range 0x2100-0x21fe has been reserved
[ 1.446251] system 00:07: ioport range 0x2200-0x22fe has been reserved
[ 1.446324] system 00:07: ioport range 0x2300-0x23fe has been reserved
[ 1.446397] system 00:07: ioport range 0x2400-0x24fe has been reserved
[ 1.446471] system 00:07: ioport range 0x2500-0x25fe has been reserved
[ 1.446544] system 00:07: ioport range 0x2600-0x26fe has been reserved
[ 1.446617] system 00:07: ioport range 0x2700-0x27fe has been reserved
[ 1.446690] system 00:07: ioport range 0x2800-0x28fe has been reserved
[ 1.446763] system 00:07: ioport range 0x2900-0x29fe has been reserved
[ 1.446837] system 00:07: ioport range 0x2a00-0x2afe has been reserved
[ 1.446910] system 00:07: ioport range 0x2b00-0x2bfe has been reserved
[ 1.446983] system 00:07: ioport range 0x2c00-0x2cfe has been reserved
[ 1.447057] system 00:07: ioport range 0x2d00-0x2dfe has been reserved
[ 1.447130] system 00:07: ioport range 0x2e00-0x2efe has been reserved
[ 1.447203] system 00:07: ioport range 0x2f00-0x2ffe has been reserved
[ 1.447277] system 00:07: ioport range 0x5000-0x50fe has been reserved
[ 1.447350] system 00:07: ioport range 0x5100-0x51fe has been reserved
[ 1.447424] system 00:07: ioport range 0x5200-0x52fe has been reserved
[ 1.447497] system 00:07: ioport range 0x5300-0x53fe has been reserved
[ 1.447586] system 00:07: ioport range 0x5400-0x54fe has been reserved
[ 1.447660] system 00:07: ioport range 0x5500-0x55fe has been reserved
[ 1.447734] system 00:07: ioport range 0x5600-0x56fe has been reserved
[ 1.447807] system 00:07: ioport range 0x5700-0x57fe has been reserved
[ 1.447881] system 00:07: ioport range 0x5800-0x58fe has been reserved
[ 1.447955] system 00:07: ioport range 0x5900-0x59fe has been reserved
[ 1.448051] system 00:07: ioport range 0x5a00-0x5afe has been reserved
[ 1.448126] system 00:07: ioport range 0x5b00-0x5bfe has been reserved
[ 1.448199] system 00:07: ioport range 0x5c00-0x5cfe has been reserved
[ 1.448273] system 00:07: ioport range 0x5d00-0x5dfe has been reserved
[ 1.448347] system 00:07: ioport range 0x5e00-0x5efe has been reserved
[ 1.448420] system 00:07: ioport range 0x5f00-0x5ffe has been reserved
[ 1.448494] system 00:07: ioport range 0x6000-0x60fe has been reserved
[ 1.448568] system 00:07: ioport range 0x6100-0x61fe has been reserved
[ 1.448642] system 00:07: ioport range 0x6200-0x62fe has been reserved
[ 1.448716] system 00:07: ioport range 0x6300-0x63fe has been reserved
[ 1.448790] system 00:07: ioport range 0x6400-0x64fe has been reserved
[ 1.448863] system 00:07: ioport range 0x6500-0x65fe has been reserved
[ 1.448937] system 00:07: ioport range 0x6600-0x66fe has been reserved
[ 1.449011] system 00:07: ioport range 0x6700-0x67fe has been reserved
[ 1.449086] system 00:07: ioport range 0x6800-0x68fe has been reserved
[ 1.449160] system 00:07: ioport range 0x6900-0x69fe has been reserved
[ 1.449234] system 00:07: ioport range 0x6a00-0x6afe has been reserved
[ 1.449308] system 00:07: ioport range 0x6b00-0x6bfe has been reserved
[ 1.449383] system 00:07: ioport range 0x6c00-0x6cfe has been reserved
[ 1.449457] system 00:07: ioport range 0x6d00-0x6dfe has been reserved
[ 1.449531] system 00:07: ioport range 0x6e00-0x6efe has been reserved
[ 1.449606] system 00:07: ioport range 0x6f00-0x6ffe has been reserved
[ 1.449680] system 00:07: ioport range 0xa000-0xa0fe has been reserved
[ 1.449754] system 00:07: ioport range 0xa100-0xa1fe has been reserved
[ 1.449829] system 00:07: ioport range 0xa200-0xa2fe has been reserved
[ 1.449903] system 00:07: ioport range 0xa300-0xa3fe has been reserved
[ 1.449991] system 00:07: ioport range 0xa400-0xa4fe has been reserved
[ 1.450066] system 00:07: ioport range 0xa500-0xa5fe has been reserved
[ 1.450141] system 00:07: ioport range 0xa600-0xa6fe has been reserved
[ 1.450216] system 00:07: ioport range 0xa700-0xa7fe has been reserved
[ 1.450291] system 00:07: ioport range 0xa800-0xa8fe has been reserved
[ 1.450366] system 00:07: ioport range 0xa900-0xa9fe has been reserved
[ 1.450441] system 00:07: ioport range 0xaa00-0xaafe has been reserved
[ 1.450515] system 00:07: ioport range 0xab00-0xabfe has been reserved
[ 1.450590] system 00:07: ioport range 0xac00-0xacfe has been reserved
[ 1.450665] system 00:07: ioport range 0xad00-0xadfe has been reserved
[ 1.450740] system 00:07: ioport range 0xae00-0xaefe has been reserved
[ 1.450815] system 00:07: ioport range 0xaf00-0xaffe has been reserved
[ 1.450894] system 00:07: iomem range 0xf0000000-0xf3ffffff could
not be reserved
[ 1.450998] system 00:07: iomem range 0xfeda0000-0xfedacfff has been reserved
[ 1.489583] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 1.489659] pci 0000:00:01.0: IO window: 0xd000-0xdfff
[ 1.489736] pci 0000:00:01.0: MEM window: 0xefd00000-0xefefffff
[ 1.489811] pci 0000:00:01.0: PREFETCH window:
0x000000e0000000-0x000000e7ffffff
[ 1.489921] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 1.489990] pci 0000:00:1c.0: IO window: disabled
[ 1.490067] pci 0000:00:1c.0: MEM window: 0xefc00000-0xefcfffff
[ 1.490141] pci 0000:00:1c.0: PREFETCH window: disabled
[ 1.490227] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[ 1.490301] pci 0000:00:1e.0: IO window: 0xc000-0xcfff
[ 1.490378] pci 0000:00:1e.0: MEM window: 0xefa00000-0xefbfffff
[ 1.490453] pci 0000:00:1e.0: PREFETCH window:
0x00000050000000-0x000000500fffff
[ 1.490588] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.490665] pci 0000:00:01.0: setting latency timer to 64
[ 1.490685] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.490762] pci 0000:00:1c.0: setting latency timer to 64
[ 1.490780] pci 0000:00:1e.0: setting latency timer to 64
[ 1.490787] bus: 00 index 0 io port: [0, ffff]
[ 1.490854] bus: 00 index 1 mmio: [0, ffffffff]
[ 1.490921] bus: 01 index 0 io port: [d000, dfff]
[ 1.490988] bus: 01 index 1 mmio: [efd00000, efefffff]
[ 1.491056] bus: 01 index 2 mmio: [e0000000, e7ffffff]
[ 1.491123] bus: 01 index 3 mmio: [0, 0]
[ 1.491189] bus: 02 index 0 mmio: [0, 0]
[ 1.491255] bus: 02 index 1 mmio: [efc00000, efcfffff]
[ 1.491322] bus: 02 index 2 mmio: [0, 0]
[ 1.491388] bus: 02 index 3 mmio: [0, 0]
[ 1.491454] bus: 03 index 0 io port: [c000, cfff]
[ 1.491521] bus: 03 index 1 mmio: [efa00000, efbfffff]
[ 1.491589] bus: 03 index 2 mmio: [50000000, 500fffff]
[ 1.491656] bus: 03 index 3 io port: [0, ffff]
[ 1.491723] bus: 03 index 4 mmio: [0, ffffffff]
[ 1.491822] NET: Registered protocol family 2
[ 1.504800] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 1.506171] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 1.507212] TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
[ 1.517988] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.518113] TCP reno registered
[ 1.520982] NET: Registered protocol family 1
[ 1.522425] Simple Boot Flag at 0x7a set to 0x1
[ 1.525588] alg: cipher: Test 1 failed on encryption for aes-asm
[ 1.525661] 00000000: 00 01 02 03 04 05 06 07 08 08 08 08 08 08 08 08
[ 1.527957] highmem bounce pool size: 64 pages
[ 1.556600] VFS: Disk quotas dquot_6.5.1
[ 1.557778] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.561831] JFFS2 version 2.2. (NAND) (c) 2001-2006 Red Hat, Inc.
[ 1.564833] msgmni has been set to 1715
[ 1.565840] alg: No test for cipher_null (cipher_null-generic)
[ 1.566150] alg: No test for digest_null (digest_null-generic)
[ 1.566359] alg: No test for compress_null (compress_null-generic)
[ 1.568958] alg: No test for fcrypt (fcrypt-generic)
[ 1.573273] alg: No test for stdrng (krng)
[ 1.573411] io scheduler noop registered
[ 1.573479] io scheduler anticipatory registered
[ 1.573547] io scheduler deadline registered
[ 1.574308] io scheduler cfq registered (default)
[ 1.574621] pci 0000:01:00.0: Boot video device
[ 1.574668] pci 0000:03:08.0: Firmware left e100 interrupts
enabled; disabling
[ 1.728109] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.731689] Floppy drive(s): fd0 is 1.44M
[ 4.744096] floppy0: no floppy controllers found
[ 4.754422] brd: module loaded
[ 4.754490] Compaq SMART2 Driver (v 2.6.0)
[ 4.754916] HP CISS Driver (v 3.6.20)
[ 4.756476] tun: Universal TUN/TAP device driver, 1.6
[ 4.756546] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 4.756993] Uniform Multi-Platform E-IDE driver
[ 4.760019] Driver 'sd' needs updating - please use bus_type methods
[ 4.760339] Driver 'sr' needs updating - please use bus_type methods
[ 4.761707] ata_piix 0000:00:1f.1: version 2.12
[ 4.761728] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.761936] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 4.762170] scsi0 : ata_piix
[ 4.763814] scsi1 : ata_piix
[ 4.764257] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 4.764332] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 4.940413] ata1.00: ATAPI: TSSTcorp CD-RW/DVD-ROM TS-H492C, DE02,
max UDMA/33
[ 4.972317] ata1.00: configured for UDMA/33
[ 4.973350] ata2: port disabled. ignoring.
[ 4.974883] scsi 0:0:0:0: CD-ROM TSSTcorp CDRWDVD
TS-H492C DE02 PQ: 0 ANSI: 5
[ 4.979478] sr0: scsi3-mmc drive: 8x/48x writer cd/rw xa/form2 cdda tray
[ 4.979556] Uniform CD-ROM driver Revision: 3.20
[ 4.980804] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 4.981238] ata_piix 0000:00:1f.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
[ 4.981317] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 5.136063] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 5.136259] scsi2 : ata_piix
[ 5.136797] scsi3 : ata_piix
[ 5.137236] ata3: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfea0 irq 20
[ 5.137308] ata4: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfea8 irq 20
[ 5.300373] ata3.00: ATA-7: SAMSUNG HD160JJ/P, ZM100-34, max UDMA7
[ 5.300445] ata3.00: 312500000 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 5.308377] ata3.00: configured for UDMA/133
[ 5.475243] scsi 2:0:0:0: Direct-Access ATA SAMSUNG
HD160JJ/ ZM10 PQ: 0 ANSI: 5
[ 5.476372] sd 2:0:0:0: [sda] 312500000 512-byte hardware sectors:
(160GB/149GiB)
[ 5.476573] sd 2:0:0:0: [sda] Write Protect is off
[ 5.476642] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.476803] sd 2:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 5.477787] sd 2:0:0:0: [sda] 312500000 512-byte hardware sectors:
(160GB/149GiB)
[ 5.477976] sd 2:0:0:0: [sda] Write Protect is off
[ 5.478044] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.478205] sd 2:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 5.478351] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
[ 5.565788] sd 2:0:0:0: [sda] Attached SCSI disk
[ 5.572376] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 5.572476] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 5.572483] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 5.575028] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 1
[ 5.579117] ehci_hcd 0000:00:1d.7: debug port 1
[ 5.579196] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[ 5.579250] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xffa80800
[ 5.592023] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00,
driver 10 Dec 2004
[ 5.592957] usb usb1: configuration #1 chosen from 1 choice
[ 5.593489] hub 1-0:1.0: USB hub found
[ 5.593684] hub 1-0:1.0: 8 ports detected
[ 5.802552] 116x: driver isp116x-hcd, 03 Nov 2005
[ 5.802839] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller
(OHCI) Driver
[ 5.803180] USB Universal Host Controller Interface driver v3.0
[ 5.803671] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 5.803761] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 5.803768] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 5.804621] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 2
[ 5.804770] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ff80
[ 5.805472] usb usb2: configuration #1 chosen from 1 choice
[ 5.805890] hub 2-0:1.0: USB hub found
[ 5.806057] hub 2-0:1.0: 2 ports detected
[ 5.912061] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 6.013367] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 6.013458] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 6.013465] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 6.014257] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 3
[ 6.014437] uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ff60
[ 6.015149] usb usb3: configuration #1 chosen from 1 choice
[ 6.015571] hub 3-0:1.0: USB hub found
[ 6.015670] hub 3-0:1.0: 2 ports detected
[ 6.044883] usb 1-1: configuration #1 chosen from 1 choice
[ 6.045406] hub 1-1:1.0: USB hub found
[ 6.045602] hub 1-1:1.0: 4 ports detected
[ 6.221134] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 6.221225] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 6.221232] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 6.221990] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 4
[ 6.222169] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
[ 6.222843] usb usb4: configuration #1 chosen from 1 choice
[ 6.223239] hub 4-0:1.0: USB hub found
[ 6.223333] hub 4-0:1.0: 2 ports detected
[ 6.429189] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 6.429278] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 6.429285] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 6.430035] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned
bus number 5
[ 6.430246] uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ff20
[ 6.430973] usb usb5: configuration #1 chosen from 1 choice
[ 6.431400] hub 5-0:1.0: USB hub found
[ 6.431496] hub 5-0:1.0: 2 ports detected
[ 6.612042] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 6.637419] Initializing USB Mass Storage driver...
[ 6.781113] usb 3-2: configuration #1 chosen from 1 choice
[ 6.896041] usb 4-1: new low speed USB device using uhci_hcd and address 2
[ 7.070853] usb 4-1: configuration #1 chosen from 1 choice
[ 7.184041] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 7.342919] usb 5-1: configuration #1 chosen from 1 choice
[ 7.347897] usbcore: registered new interface driver usb-storage
[ 7.347977] USB Mass Storage support registered.
[ 7.349127] PNP: No PS/2 controller found. Probing ports directly.
[ 7.352291] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 7.352427] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 7.353392] mice: PS/2 mouse device common for all mice
[ 7.353853] I2O subsystem v1.325
[ 7.353923] i2o: max drivers = 8
[ 7.354993] I2O Configuration OSM v1.323
[ 7.355259] I2O Bus Adapter OSM v1.317
[ 7.355523] I2O Block Device OSM v1.325
[ 7.356544] I2O SCSI Peripheral OSM v1.316
[ 7.357005] I2O ProcFS OSM v1.316
[ 7.358804] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23)
initialised: dm-devel@redhat.com
[ 7.358936] cpuidle: using governor ladder
[ 7.359005] cpuidle: using governor menu
[ 7.375892] dcdbas dcdbas: Dell Systems Management Base Driver
(version 5.6.0-3.2)
[ 7.381641] usbcore: registered new interface driver hiddev
[ 7.395400] input: USB Optical Mouse as /class/input/input0
[ 7.397992] generic-usb 0003:0461:4D15.0001: input,hidraw0: USB HID
v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.1-2/input0
[ 7.414135] input: Dell Dell USB Keyboard as /class/input/input1
[ 7.417014] generic-usb 0003:413C:2003.0002: input,hidraw1: USB HID
v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.2-1/input0
[ 7.417404] usbcore: registered new interface driver usbhid
[ 7.417483] usbhid: v2.6:USB HID core driver
[ 7.417907] GACT probability NOT on
[ 7.417974] Mirror/redirect action on
[ 7.419705] TCP cubic registered
[ 7.419775] NET: Registered protocol family 17
[ 7.420498] Bridge firewalling registered
[ 7.420644] Ebtables v2.0 registered
[ 7.420711] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
[ 7.420781] All bugs added by David S. Miller <davem@redhat.com>
[ 7.420921] Starting balanced_irq
[ 7.421080] Using IPI No-Shortcut mode
[ 7.422782] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[ 7.449139] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 7.449212] EXT3-fs: write access will be enabled during recovery.
[ 7.511953] kjournald starting. Commit interval 5 seconds
[ 7.512150] EXT3-fs: recovery complete.
[ 7.513123] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.513315] VFS: Mounted root (ext3 filesystem) readonly.
[ 7.514630] Freeing unused kernel memory: 1488k freed
[ 7.515425] Write protecting the kernel text: 3316k
[ 7.515770] Write protecting the kernel read-only data: 1296k
[ 10.644377] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 10.644691] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 11.282396] BUG: unable to handle kernel paging request at ffffffff
[ 11.282554] IP: [<ffffffff>] 0xffffffff
[ 11.282661] *pde = 00008067 *pte = 00000000
[ 11.282806] Oops: 0000 [#1] SMP
[ 11.282944] Modules linked in: button(+) evdev sg
[ 11.283148]
[ 11.283221] Pid: 2169, comm: modprobe Not tainted (2.6.27-smp #5)
Dell DM051
[ 11.283332] EIP: 0060:[<ffffffff>] EFLAGS: 00010286 CPU: 0
[ 11.284013] EIP is at 0xffffffff
[ 11.284013] EAX: f70267b4 EBX: 00000000 ECX: ffffffff EDX: f61d8000
[ 11.284013] ESI: f70267b4 EDI: f61d8000 EBP: f6027d3c ESP: f6027d1c
[ 11.284013] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[ 11.284013] Process modprobe (pid: 2169, ti=f6026000 task=f6a74680
task.ti=f6026000)
[ 11.284013] Stack:
[ 11.284013] c02ca536 f6027d50 000080d0 f6acbe10 f6027d4c f7042120
f702689c c02ca400
[ 11.284013] f6027d8c c025f50a f61d8000 c052c821 c0508b7a c01509cb
00000000 00000000
[ 11.284013] c05122ad f6acbe10 c0508b7a c059e040 f61d8000 c0439738
f6027d94 c02d10f6
[ 11.284013] Call Trace:
[ 11.284013] [<c02ca536>] ? dev_uevent+0x136/0x1d0
[ 11.284013] [<c02ca400>] ? dev_uevent+0x0/0x1d0
[ 11.284013] [<c025f50a>] ? kobject_uevent_env+0x18a/0x380
[ 11.284013] [<c01509cb>] ? trace_hardirqs_on+0xb/0x10
[ 11.284013] [<c0439738>] ? mutex_unlock+0x8/0x10
[ 11.284013] [<c02d10f6>] ? device_pm_add+0x56/0xb0
[ 11.284013] [<c025f70a>] ? kobject_uevent+0xa/0x10
[ 11.284013] [<c02cb3e4>] ? device_add+0x454/0x600
[ 11.284013] [<f80821e9>] ? acpi_button_notify_fixed+0x0/0x20 [button]
[ 11.284013] [<c015093d>] ? trace_hardirqs_on_caller+0xbd/0x140
[ 11.284013] [<c01509cb>] ? trace_hardirqs_on+0xb/0x10
[ 11.284013] [<c0377c78>] ? input_register_device+0x88/0x1f0
[ 11.284013] [<f80825dc>] ? acpi_button_add+0x319/0x425 [button]
[ 11.284013] [<c02a303b>] ? acpi_device_probe+0x3a/0x88
[ 11.284013] [<c02cd37e>] ? driver_probe_device+0x7e/0x170
[ 11.284013] [<c02cd4e5>] ? __driver_attach+0x75/0x80
[ 11.284013] [<c02cca29>] ? bus_for_each_dev+0x49/0x70
[ 11.284013] [<c02cd1f9>] ? driver_attach+0x19/0x20
[ 11.284013] [<c02cd470>] ? __driver_attach+0x0/0x80
[ 11.284013] [<c02ccf81>] ? bus_add_driver+0x1b1/0x230
[ 11.284013] [<c02a2f9f>] ? acpi_device_remove+0x0/0x62
[ 11.284013] [<c02cd67f>] ? driver_register+0x4f/0x120
[ 11.284013] [<f8086000>] ? acpi_button_init+0x0/0x51 [button]
[ 11.284013] [<c01cd1e3>] ? proc_mkdir_mode+0x33/0x50
[ 11.284013] [<f8086000>] ? acpi_button_init+0x0/0x51 [button]
[ 11.284013] [<c02a332c>] ? acpi_bus_register_driver+0x3a/0x3c
[ 11.284013] [<f8086032>] ? acpi_button_init+0x32/0x51 [button]
[ 11.284013] [<c010111a>] ? do_one_initcall+0x2a/0x150
[ 11.284013] [<c014d82b>] ? trace_hardirqs_off+0xb/0x10
[ 11.284013] [<c043b4d7>] ? _spin_unlock_irqrestore+0x37/0x60
[ 11.284013] [<c012667a>] ? try_to_wake_up+0xca/0x160
[ 11.284013] [<c01509cb>] ? trace_hardirqs_on+0xb/0x10
[ 11.284013] [<c015093d>] ? trace_hardirqs_on_caller+0xbd/0x140
[ 11.284013] [<c015bf15>] ? sys_init_module+0x85/0x1b0
[ 11.284013] [<c015093d>] ? trace_hardirqs_on_caller+0xbd/0x140
[ 11.284013] [<c0264264>] ? trace_hardirqs_on_thunk+0xc/0x10
[ 11.284013] [<c0103e22>] ? syscall_call+0x7/0xb
[ 11.284013] Code: Bad EIP value.
[ 11.284013] EIP: [<ffffffff>] 0xffffffff SS:ESP 0068:f6027d1c
[ 11.284013] ---[ end trace 8aedfe1cfa9aa99a ]---
[ 11.640783] Linux agpgart interface v0.103
[ 11.720111] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level,
low) -> IRQ 17
[ 11.839081] rtc_cmos 00:05: RTC can wake from S4
[ 11.839417] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 11.839522] rtc0: alarms up to one day, hpet irqs
[ 11.982530] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level,
low) -> IRQ 16
[ 11.982831] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 12.013421] usbcore: registered new interface driver usbserial
[ 12.013501] usbserial: USB Serial Driver core
[ 12.076298] usbserial: USB Serial support registered for pl2303
[ 12.076458] pl2303 5-1:1.0: pl2303 converter detected
[ 12.088454] usb 5-1: pl2303 converter now attached to ttyUSB0
[ 12.088605] usbcore: registered new interface driver pl2303
[ 12.088685] pl2303: Prolific PL2303 USB to serial adaptor driver
[ 12.197887] 3c59x 0000:03:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 12.198005] 3c59x: Donald Becker and others.
[ 12.198102] 0000:03:02.0: 3Com PCI 3c905C Tornado at f81a6f80.
[ 12.229792] udev: renamed network interface eth0 to eth1
[ 42.224017] thermal: gave up waiting for init of module processor.
[ 42.224094] thermal: Unknown symbol acpi_processor_set_thermal_limit
[ 42.228591] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
[ 42.228667] e100: Copyright(c) 1999-2006 Intel Corporation
[ 42.228834] e100 0000:03:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 42.253651] e100 0000:03:08.0: PME# disabled
[ 42.254504] e100: eth0: e100_probe: addr 0xefaff000, irq 20, MAC
addr 00:13:72:e7:4d:66
[ 117.954860] SysRq : Show Blocked State
[ 117.954960] task PC stack pid father
[ 117.955037] modprobe D f675bdac 0 2170 2167
[ 117.955167] f675be08 00000046 00000246 f675bdac 00000046 00000001
f739e9c0 f6cbf918
[ 117.955510] f675bdac c07490e0 c074c500 c074c500 c074c500 00000001
f739eb14 c205b500
[ 117.955853] 00000001 00000000 f675be18 f6631e00 00000000 f70d0b78
f739e9c0 f739e9c0
[ 117.956196] Call Trace:
[ 117.956269] [<c014e72a>] ? print_lock_contention_bug+0x1a/0xe0
[ 117.956340] [<c014e72a>] ? print_lock_contention_bug+0x1a/0xe0
[ 117.956413] [<c0438fa5>] schedule_timeout+0x75/0xc0
[ 117.956483] [<c01509cb>] ? trace_hardirqs_on+0xb/0x10
[ 117.956552] [<c0439fd9>] __down+0x49/0x70
[ 117.956626] [<c014589e>] down+0x3e/0x40
[ 117.956696] [<c02cd4a6>] __driver_attach+0x36/0x80
[ 117.956767] [<c02cca29>] bus_for_each_dev+0x49/0x70
[ 117.956838] [<c02cd1f9>] driver_attach+0x19/0x20
[ 117.956907] [<c02cd470>] ? __driver_attach+0x0/0x80
[ 117.956977] [<c02ccf81>] bus_add_driver+0x1b1/0x230
[ 117.957048] [<c02a2f9f>] ? acpi_device_remove+0x0/0x62
[ 117.957118] [<c02cd67f>] driver_register+0x4f/0x120
[ 117.957192] [<f80a0000>] ? acpi_processor_init+0x0/0xea [processor]
[ 117.957267] [<f80a0000>] ? acpi_processor_init+0x0/0xea [processor]
[ 117.957339] [<c02a332c>] acpi_bus_register_driver+0x3a/0x3c
[ 117.957412] [<f80a0081>] acpi_processor_init+0x81/0xea [processor]
[ 117.957484] [<c010111a>] do_one_initcall+0x2a/0x150
[ 117.957554] [<c014d82b>] ? trace_hardirqs_off+0xb/0x10
[ 117.957625] [<c043b4d7>] ? _spin_unlock_irqrestore+0x37/0x60
[ 117.957696] [<c012667a>] ? try_to_wake_up+0xca/0x160
[ 117.957768] [<c015bf15>] sys_init_module+0x85/0x1b0
[ 117.957839] [<c018f27d>] ? sys_read+0x3d/0x70
[ 117.957909] [<c0264264>] ? trace_hardirqs_on_thunk+0xc/0x10
[ 117.957980] [<c0103e22>] syscall_call+0x7/0xb
[ 117.958049] Sched Debug Version: v0.07, 2.6.27-smp #5
[ 117.958117] now at 117958.053607 msecs
[ 117.958183] .sysctl_sched_latency : 40.000000
[ 117.958253] .sysctl_sched_min_granularity : 8.000000
[ 117.958322] .sysctl_sched_wakeup_granularity : 10.000000
[ 117.958392] .sysctl_sched_child_runs_first : 0.000001
[ 117.958461] .sysctl_sched_features : 7935
[ 117.958530]
[ 117.958531] cpu#0, 2792.711 MHz
[ 117.958655] .nr_running : 1
[ 117.958722] .load : 3121
[ 117.958789] .nr_switches : 40067
[ 117.958831] .nr_load_updates : 3106
[ 117.958831] .nr_uninterruptible : 4294967260
[ 117.958831] .jiffies : 4294921784
[ 117.958831] .next_balance : 4294.921774
[ 117.958831] .curr->pid : 0
[ 117.958831] .clock : 117954.854961
[ 117.958831] .cpu_load[0] : 0
[ 117.958831] .cpu_load[1] : 0
[ 117.958831] .cpu_load[2] : 0
[ 117.958831] .cpu_load[3] : 0
[ 117.958831] .cpu_load[4] : 0
[ 117.958831]
[ 117.958831] cfs_rq[0]:
[ 117.958831] .exec_clock : 0.000000
[ 117.958831] .MIN_vruntime : 47101.787051
[ 117.958831] .min_vruntime : 47141.329297
[ 117.958831] .max_vruntime : 47101.787051
[ 117.958831] .spread : 0.000000
[ 117.958831] .spread0 : 0.000000
[ 117.958831] .nr_running : 1
[ 117.958831] .load : 3121
[ 117.958831] .nr_spread_over : 0
[ 117.958831]
[ 117.958831] rt_rq[0]:
[ 117.958831] .rt_nr_running : 0
[ 117.958831] .rt_throttled : 0
[ 117.958831] .rt_time : 0.000000
[ 117.958831] .rt_runtime : 950.000000
[ 117.958831]
[ 117.958831] runnable tasks:
[ 117.958831] task PID tree-key switches prio
exec-runtime sum-exec sum-sleep
[ 117.958831] ----------------------------------------------------------------------------------------------------------
[ 117.958831] events/0 9 47101.787051 137 115
0 0 0.000000
0.000000 0.000000
[ 117.958831]
[ 117.958831] cpu#1, 2792.711 MHz
[ 117.958831] .nr_running : 0
[ 117.958831] .load : 0
[ 117.958831] .nr_switches : 12371
[ 117.958831] .nr_load_updates : 1847
[ 117.958831] .nr_uninterruptible : 37
[ 117.958831] .jiffies : 4294921784
[ 117.958831] .next_balance : 4294.920669
[ 117.958831] .curr->pid : 0
[ 117.958831] .clock : 117952.009013
[ 117.958831] .cpu_load[0] : 0
[ 117.958831] .cpu_load[1] : 0
[ 117.958831] .cpu_load[2] : 0
[ 117.958831] .cpu_load[3] : 0
[ 117.958831] .cpu_load[4] : 5
[ 117.958831]
[ 117.958831] cfs_rq[1]:
[ 117.958831] .exec_clock : 0.000000
[ 117.958831] .MIN_vruntime : 0.000001
[ 117.958831] .min_vruntime : 48215.087202
[ 117.958831] .max_vruntime : 0.000001
[ 117.958831] .spread : 0.000000
[ 117.958831] .spread0 : 1073.757905
[ 117.958831] .nr_running : 0
[ 117.958831] .load : 0
[ 117.958831] .nr_spread_over : 0
[ 117.958831]
[ 117.958831] rt_rq[1]:
[ 117.958831] .rt_nr_running : 0
[ 117.958831] .rt_throttled : 0
[ 117.958831] .rt_time : 0.000000
[ 117.958831] .rt_runtime : 950.000000
[ 117.958831]
[ 117.958831] runnable tasks:
[ 117.958831] task PID tree-key switches prio
exec-runtime sum-exec sum-sleep
[ 117.958831] ----------------------------------------------------------------------------------------------------------
[ 117.958831]
[ 129.740364] Adding 1116476k swap on /dev/sda8. Priority:-1
extents:1 across:1116476k
[ 129.856704] fuse init (API version 7.9)
[ 131.131832] EXT3 FS on sda5, internal journal
[ 135.276330] kjournald starting. Commit interval 5 seconds
[ 135.276735] EXT3 FS on sda7, internal journal
[ 135.276846] EXT3-fs: mounted filesystem with ordered data mode.
[ 136.484067] eth1: setting full-duplex.
[ 194.563265] Bluetooth: Core ver 2.13
[ 194.566089] NET: Registered protocol family 31
[ 194.566158] Bluetooth: HCI device and connection manager initialized
[ 194.566230] Bluetooth: HCI socket layer initialized
[ 194.653181] Bluetooth: L2CAP ver 2.11
[ 194.653255] Bluetooth: L2CAP socket layer initialized
[ 194.878311] Bluetooth: RFCOMM socket layer initialized
[ 194.878419] Bluetooth: RFCOMM TTY layer initialized
[ 194.878487] Bluetooth: RFCOMM ver 1.10
[ 320.040017] thermal: gave up waiting for init of module processor.
[ 320.040093] thermal: Unknown symbol acpi_processor_set_thermal_limit
[ 4284.368060] hub 5-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[ 4284.368069] usb 5-1: USB disconnect, address 2
[ 4284.369634] pl2303 5-1:1.0: device disconnected
[ 4284.468669] pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0
[ 4284.608028] usb 5-1: new full speed USB device using uhci_hcd and address 3
[ 4284.767182] usb 5-1: configuration #1 chosen from 1 choice
[ 4284.770032] pl2303 5-1:1.0: pl2303 converter detected
[ 4284.794181] usb 5-1: pl2303 converter now attached to ttyUSB0
[ 4286.988130] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
--
Regards
dave


\
 
 \ /
  Last update: 2008-10-17 11:29    [from the cache]
©2003-2011 Jasper Spaans