lkml.org 
[lkml]   [2008]   [Oct]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [patch 06/18] m68k: Disable Amiga serial console support if modular
From
Date
On Mon, 2008-10-13 at 21:58 +0200, Geert Uytterhoeven wrote:
> Apparently console_initcall() is not defined in the modular case.

Yes, see include/linux/init.h:
#ifndef MODULE
[...]
#define console_initcall(fn) \
static initcall_t __initcall_##fn \
__used __section(.con_initcall.init) = fn
[...]

> Any better alternative fix?

Well, (a number of) other serial consoles cannot be selected if the
corresponding serial driver is modular. Try:
grep -B 2 -E "depends on .*=y" drivers/serial/Kconfig | \
grep -A 2 -E "^config .*CONSOLE"

For instance:
config SERIAL_8250_CONSOLE
bool "Console on 8250/16550 and compatible serial port"
depends on SERIAL_8250=y

Maybe this config entry (in arch/m68k/Kconfig) could be cleaned up (or
split into multiple entries):
config SERIAL_CONSOLE
bool "Support for serial port console"
depends on (AMIGA || ATARI || MAC || SUN3 || SUN3X || VME ||
APOLLO) && (ATARI_MFPSER=y || ATARI_MIDI=y || MAC_SCC=y ||
AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || SERIAL=y
|| MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL)
[...]

That "depends on" line seems likely to lead to problems like the one you
ran into. But your patch (which I didn't test) is probably simpler.


Paul Bolle



\
 
 \ /
  Last update: 2008-10-13 23:11    [W:0.157 / U:1.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site