lkml.org 
[lkml]   [2008]   [Oct]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[git pull] IDE (a.k.a. "zombie") updates #2
Date

* Disk shock protection support. (Elias Oltmanns)

* IDE ACPI fix for slave device-only configurations.

* Conversion of ide-{cd,floppy} to new IDE debugging macros.
(Borislav Petkov)

* Next part of generic ATAPI support saga. (the usual suspects)

* sgiioc4 host driver fixes. (Sergei Shtylylov)

* "Short cable" quirk for EC-900 mini-notebook.
(Herton Ronaldo Krzesinski)

* Misc fixups (Adrian Bunk, Alexander Beregalov, Elias Oltmanns).

* A ton of cleanups.


Linus, please pull from:

master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6.git/

to receive the following updates:

Documentation/laptops/disk-shock-protection.txt | 149 +++++
arch/mips/include/asm/mach-generic/ide.h | 29 -
arch/xtensa/kernel/setup.c | 5 -
drivers/ide/Kconfig | 38 +--
drivers/ide/Makefile | 19 +-
drivers/ide/arm/icside.c | 23 +-
drivers/ide/h8300/ide-h8300.c | 2 +-
drivers/ide/ide-acpi.c | 12 +-
drivers/ide/ide-atapi.c | 183 +++++--
drivers/ide/ide-cd.c | 261 +++++++---
drivers/ide/ide-cd.h | 1 -
drivers/ide/ide-disk.c | 357 ++++---------
drivers/ide/ide-disk.h | 32 ++
drivers/ide/ide-disk_ioctl.c | 29 +
drivers/ide/ide-disk_proc.c | 129 +++++
drivers/ide/ide-dma-sff.c | 356 ++++++++++++
drivers/ide/ide-dma.c | 481 ++---------------
drivers/ide/ide-floppy.c | 392 ++++----------
drivers/ide/ide-floppy.h | 19 +-
drivers/ide/ide-floppy_ioctl.c | 56 ++-
drivers/ide/ide-floppy_proc.c | 33 ++
drivers/ide/ide-generic.c | 51 +--
drivers/ide/ide-io.c | 237 ++++-----
drivers/ide/ide-ioctls.c | 21 +-
drivers/ide/ide-iops.c | 95 +++--
drivers/ide/ide-lib.c | 2 +-
drivers/ide/ide-park.c | 121 +++++
drivers/ide/ide-probe.c | 215 ++++----
drivers/ide/ide-proc.c | 6 +-
drivers/ide/ide-tape.c | 155 ++----
drivers/ide/ide-taskfile.c | 128 ++---
drivers/ide/ide.c | 135 +++--
drivers/ide/legacy/ali14xx.c | 2 +-
drivers/ide/legacy/ht6560b.c | 9 +-
drivers/ide/legacy/ide-4drives.c | 2 +-
drivers/ide/legacy/qd65xx.c | 2 +-
drivers/ide/mips/au1xxx-ide.c | 34 +-
drivers/ide/pci/aec62xx.c | 8 +-
drivers/ide/pci/alim15x3.c | 15 +-
drivers/ide/pci/amd74xx.c | 8 +-
drivers/ide/pci/atiixp.c | 6 +-
drivers/ide/pci/cmd640.c | 18 +-
drivers/ide/pci/cmd64x.c | 10 +-
drivers/ide/pci/cs5520.c | 4 +-
drivers/ide/pci/cs5530.c | 6 +-
drivers/ide/pci/cs5535.c | 8 +-
drivers/ide/pci/cy82c693.c | 124 +----
drivers/ide/pci/delkin_cb.c | 6 +-
drivers/ide/pci/generic.c | 6 +-
drivers/ide/pci/hpt34x.c | 6 +-
drivers/ide/pci/hpt366.c | 15 +-
drivers/ide/pci/it8213.c | 6 +-
drivers/ide/pci/it821x.c | 46 +-
drivers/ide/pci/jmicron.c | 6 +-
drivers/ide/pci/ns87415.c | 21 +-
drivers/ide/pci/opti621.c | 8 +-
drivers/ide/pci/pdc202xx_new.c | 6 +-
drivers/ide/pci/pdc202xx_old.c | 14 +-
drivers/ide/pci/piix.c | 46 +-
drivers/ide/pci/rz1000.c | 6 +-
drivers/ide/pci/sc1200.c | 12 +-
drivers/ide/pci/scc_pata.c | 29 +-
drivers/ide/pci/serverworks.c | 8 +-
drivers/ide/pci/sgiioc4.c | 59 +--
drivers/ide/pci/siimage.c | 17 +-
drivers/ide/pci/sis5513.c | 6 +-
drivers/ide/pci/sl82c105.c | 8 +-
drivers/ide/pci/slc90e66.c | 6 +-
drivers/ide/pci/tc86c001.c | 8 +-
drivers/ide/pci/triflex.c | 15 +-
drivers/ide/pci/trm290.c | 10 +-
drivers/ide/pci/via82cxxx.c | 6 +-
drivers/ide/ppc/pmac.c | 71 +--
drivers/scsi/ide-scsi.c | 102 ++---
include/linux/ide.h | 653 +++++++++++++----------
75 files changed, 2656 insertions(+), 2574 deletions(-)
create mode 100644 Documentation/laptops/disk-shock-protection.txt
create mode 100644 drivers/ide/ide-disk.h
create mode 100644 drivers/ide/ide-disk_ioctl.c
create mode 100644 drivers/ide/ide-disk_proc.c
create mode 100644 drivers/ide/ide-dma-sff.c
create mode 100644 drivers/ide/ide-floppy_proc.c
create mode 100644 drivers/ide/ide-park.c


Adrian Bunk (1):
xtensa: remove dead CONFIG_BLK_DEV_IDE code

Alexander Beregalov (1):
ide-cd: fix printk format warning

Bartlomiej Zolnierkiewicz (48):
ide: drop dsc_handle argument from ide_pc_intr()
ide: add pointer to the current packet command to ide_drive_t
ide: drop 'timeout' and 'expiry' arguments from ide_pc_intr()
ide: add request_sense_{pc,rq} to ide_drive_t
ide: add ide_retry_pc() helper
ide: add ->pc_{update,io}_buffers methods
ide: make ide_pc_intr() static
ide: make ide_transfer_pc() static
ide: remove CONFIG_BLK_DEV_IDE config option (take 2)
ide: remove unnecessary MAX_HWIFS checks from ide-probe.c
ide: fix IDE ACPI for slave device-only configurations
ide-disk: set_addressing() fixes
ide-disk: add ide_do_setfeature() helper
ide: add device flags
ide: DMA_PIO_RETRY -> IDE_DFLAG_DMA_PIO_RETRY
ide: remove superfluous ->media field from ide_driver_t
ide: remove superfluous ->dma field from ide_hwif_t
ide: remove superfluous ->waiting_for_dma checks
ide: fix HDIO_DRIVE_TASK[FILE] ioctls for CHS commands on LBA devices
ide: sanitize ide*_pm_* enums
cy82c693: remove dead CY82C693_SETDMA_CLOCK code
cy82c693: remove no longer needed CY82C693_DEBUG_LOGS code
ide: use 'drive->dn & 1' instead of drive->select.b.unit
ide: remove [ata_]select_t
ide: convert 'pio_mode' device setting to use DS_SYNC flag
ide: factor out reset error reporting from reset_pollfunc()
ide: merge all TASKFILE_NO_DATA data phase handlers into taskfile_no_intr()
ide: use unique names for struct pci_driver instances
ide: ->ide_dma_clear_irq() -> ->clear_irq()
ide-generic: no need to probe all ports at once
ide-generic: remove no longer needed ide_probe_legacy()
ide: remove ide_host_alloc_all()
ide: set IDE_AFLAG_DRQ_INTERRUPT in do_identify()
ide-cd: no need to zero drive->special.all
ide-floppy: move all ioctl handling to ide-floppy_ioctl.c (take 2)
ide-floppy: move /proc handling to ide-floppy_proc.c (take 2)
ide-disk: move all ioctl handling to ide-disk_ioctl.c
ide-disk: move /proc handling to ide-disk_proc.c (take 3)
pmac: remove superfluous pmif == NULL checks
pmac: remove needless pmac_ide_destroy_dmatable() wrapper
ide: __ide_dma_end() -> ide_dma_end()
ide: make ide_dma_lost_irq() available also for CONFIG_BLK_DEV_IDEDMA_SFF=n
ide: make ide_dma_timeout() available also for CONFIG_BLK_DEV_IDEDMA_SFF=n
ide: switch to DMA-mapping API part #2
ide: remove needless includes from ide-dma.c
ide: cleanup ide_build_dmatable()
ide: cleanup ide-dma.c
ide: move SFF DMA code to ide-dma-sff.c

Borislav Petkov (10):
ide: unify conversion macros
ide: add drive->debug_mask switch
ide: add a driver-wide debugging macro
ide-floppy: convert driver to the new debugging macro
ide-floppy: add a debug_mask module parameter
ide-cd: convert driver to new ide debugging macro (v3)
ide-cd: add a debug_mask module parameter
ide: add ide_drive_t.dma flag
ide-cd: move cdrom_info.dma to ide_drive_t.dma
ide-atapi: assign taskfile flags per device type

Elias Oltmanns (3):
ide: Two fixes regarding memory allocation
ide: Implement disk shock protection support (v4)
ata: Add documentation for hard disk shock protection interface (v3)

Herton Ronaldo Krzesinski (1):
piix: add Hercules EC-900 mini-notebook to ich_laptop short cable list

Sergei Shtylylov (2):
sgiioc4: sgiioc4_read_status drive busy check fix
sgiioc4: fix messages


diff --git a/Documentation/laptops/disk-shock-protection.txt b/Documentation/laptops/disk-shock-protection.txt
new file mode 100644
index 0000000..0e6ba26
--- /dev/null
+++ b/Documentation/laptops/disk-shock-protection.txt
@@ -0,0 +1,149 @@
+Hard disk shock protection
+==========================
+
+Author: Elias Oltmanns <eo@nebensachen.de>
+Last modified: 2008-10-03
+
+
+0. Contents
+-----------
+
+1. Intro
+2. The interface
+3. References
+4. CREDITS
+
+
+1. Intro
+--------
+
+ATA/ATAPI-7 specifies the IDLE IMMEDIATE command with unload feature.
+Issuing this command should cause the drive to switch to idle mode and
+unload disk heads. This feature is being used in modern laptops in
+conjunction with accelerometers and appropriate software to implement
+a shock protection facility. The idea is to stop all I/O operations on
+the internal hard drive and park its heads on the ramp when critical
+situations are anticipated. The desire to have such a feature
+available on GNU/Linux systems has been the original motivation to
+implement a generic disk head parking interface in the Linux kernel.
+Please note, however, that other components have to be set up on your
+system in order to get disk shock protection working (see
+section 3. References below for pointers to more information about
+that).
+
+
+2. The interface
+----------------
+
+For each ATA device, the kernel exports the file
+block/*/device/unload_heads in sysfs (here assumed to be mounted under
+/sys). Access to /sys/block/*/device/unload_heads is denied with
+-EOPNOTSUPP if the device does not support the unload feature.
+Otherwise, writing an integer value to this file will take the heads
+of the respective drive off the platter and block all I/O operations
+for the specified number of milliseconds. When the timeout expires and
+no further disk head park request has been issued in the meantime,
+normal operation will be resumed. The maximal value accepted for a
+timeout is 30000 milliseconds. Exceeding this limit will return
+-EOVERFLOW, but heads will be parked anyway and the timeout will be
+set to 30 seconds. However, you can always change a timeout to any
+value between 0 and 30000 by issuing a subsequent head park request
+before the timeout of the previous one has expired. In particular, the
+total timeout can exceed 30 seconds and, more importantly, you can
+cancel a previously set timeout and resume normal operation
+immediately by specifying a timeout of 0. Values below -2 are rejected
+with -EINVAL (see below for the special meaning of -1 and -2). If the
+timeout specified for a recent head park request has not yet expired,
+reading from /sys/block/*/device/unload_heads will report the number
+of milliseconds remaining until normal operation will be resumed;
+otherwise, reading the unload_heads attribute will return 0.
+
+For example, do the following in order to park the heads of drive
+/dev/sda and stop all I/O operations for five seconds:
+
+# echo 5000 > /sys/block/sda/device/unload_heads
+
+A simple
+
+# cat /sys/block/sda/device/unload_heads
+
+will show you how many milliseconds are left before normal operation
+will be resumed.
+
+A word of caution: The fact that the interface operates on a basis of
+milliseconds may raise expectations that cannot be satisfied in
+reality. In fact, the ATA specs clearly state that the time for an
+unload operation to complete is vendor specific. The hint in ATA-7
+that this will typically be within 500 milliseconds apparently has
+been dropped in ATA-8.
+
+There is a technical detail of this implementation that may cause some
+confusion and should be discussed here. When a head park request has
+been issued to a device successfully, all I/O operations on the
+controller port this device is attached to will be deferred. That is
+to say, any other device that may be connected to the same port will
+be affected too. The only exception is that a subsequent head unload
+request to that other device will be executed immediately. Further
+operations on that port will be deferred until the timeout specified
+for either device on the port has expired. As far as PATA (old style
+IDE) configurations are concerned, there can only be two devices
+attached to any single port. In SATA world we have port multipliers
+which means that a user-issued head parking request to one device may
+actually result in stopping I/O to a whole bunch of devices. However,
+since this feature is supposed to be used on laptops and does not seem
+to be very useful in any other environment, there will be mostly one
+device per port. Even if the CD/DVD writer happens to be connected to
+the same port as the hard drive, it generally *should* recover just
+fine from the occasional buffer under-run incurred by a head park
+request to the HD. Actually, when you are using an ide driver rather
+than its libata counterpart (i.e. your disk is called /dev/hda
+instead of /dev/sda), then parking the heads of one drive (drive X)
+will generally not affect the mode of operation of another drive
+(drive Y) on the same port as described above. It is only when a port
+reset is required to recover from an exception on drive Y that further
+I/O operations on that drive (and the reset itself) will be delayed
+until drive X is no longer in the parked state.
+
+Finally, there are some hard drives that only comply with an earlier
+version of the ATA standard than ATA-7, but do support the unload
+feature nonetheless. Unfortunately, there is no safe way Linux can
+detect these devices, so you won't be able to write to the
+unload_heads attribute. If you know that your device really does
+support the unload feature (for instance, because the vendor of your
+laptop or the hard drive itself told you so), then you can tell the
+kernel to enable the usage of this feature for that drive by writing
+the special value -1 to the unload_heads attribute:
+
+# echo -1 > /sys/block/sda/device/unload_heads
+
+will enable the feature for /dev/sda, and giving -2 instead of -1 will
+disable it again.
+
+
+3. References
+-------------
+
+There are several laptops from different vendors featuring shock
+protection capabilities. As manufacturers have refused to support open
+source development of the required software components so far, Linux
+support for shock protection varies considerably between different
+hardware implementations. Ideally, this section should contain a list
+of pointers at different projects aiming at an implementation of shock
+protection on different systems. Unfortunately, I only know of a
+single project which, although still considered experimental, is fit
+for use. Please feel free to add projects that have been the victims
+of my ignorance.
+
+- http://www.thinkwiki.org/wiki/HDAPS
+ See this page for information about Linux support of the hard disk
+ active protection system as implemented in IBM/Lenovo Thinkpads.
+
+
+4. CREDITS
+----------
+
+This implementation of disk head parking has been inspired by a patch
+originally published by Jon Escombe <lists@dresco.co.uk>. My efforts
+to develop an implementation of this feature that is fit to be merged
+into mainline have been aided by various kernel developers, in
+particular by Tejun Heo and Bartlomiej Zolnierkiewicz.
diff --git a/arch/mips/include/asm/mach-generic/ide.h b/arch/mips/include/asm/mach-generic/ide.h
index 73008f7..9c93a5b 100644
--- a/arch/mips/include/asm/mach-generic/ide.h
+++ b/arch/mips/include/asm/mach-generic/ide.h
@@ -19,35 +19,6 @@
#include <linux/stddef.h>
#include <asm/processor.h>

-static __inline__ int ide_probe_legacy(void)
-{
-#ifdef CONFIG_PCI
- struct pci_dev *dev;
- /*
- * This can be called on the ide_setup() path, super-early in
- * boot. But the down_read() will enable local interrupts,
- * which can cause some machines to crash. So here we detect
- * and flag that situation and bail out early.
- */
- if (no_pci_devices())
- return 0;
- dev = pci_get_class(PCI_CLASS_BRIDGE_EISA << 8, NULL);
- if (dev)
- goto found;
- dev = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, NULL);
- if (dev)
- goto found;
- return 0;
-found:
- pci_dev_put(dev);
- return 1;
-#elif defined(CONFIG_EISA) || defined(CONFIG_ISA)
- return 1;
-#else
- return 0;
-#endif
-}
-
/* MIPS port and memory-mapped I/O string operations. */
static inline void __ide_flush_prologue(void)
{
diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c
index a00359e..9606d2b 100644
--- a/arch/xtensa/kernel/setup.c
+++ b/arch/xtensa/kernel/setup.c
@@ -53,11 +53,6 @@ extern struct fd_ops no_fd_ops;
struct fd_ops *fd_ops;
#endif

-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-extern struct ide_ops no_ide_ops;
-struct ide_ops *ide_ops;
-#endif
-
extern struct rtc_ops no_rtc_ops;
struct rtc_ops *rtc_ops;

diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index b50b5da..6c6dd2f 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -54,38 +54,6 @@ menuconfig IDE

if IDE

-config BLK_DEV_IDE
- tristate "Enhanced IDE/MFM/RLL disk/cdrom/tape/floppy support"
- ---help---
- If you say Y here, you will use the full-featured IDE driver to
- control up to ten ATA/IDE interfaces, each being able to serve a
- "master" and a "slave" device, for a total of up to twenty ATA/IDE
- disk/cdrom/tape/floppy drives.
-
- Useful information about large (>540 MB) IDE disks, multiple
- interfaces, what to do if ATA/IDE devices are not automatically
- detected, sound card ATA/IDE ports, module support, and other
- topics, is contained in <file:Documentation/ide/ide.txt>. For detailed
- information about hard drives, consult the Disk-HOWTO and the
- Multi-Disk-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To fine-tune ATA/IDE drive/interface parameters for improved
- performance, look for the hdparm package at
- <ftp://ibiblio.org/pub/Linux/system/hardware/>.
-
- To compile this driver as a module, choose M here and read
- <file:Documentation/ide/ide.txt>. The module will be called ide-mod.
- Do not compile this driver as a module if your root file system (the
- one containing the directory /) is located on an IDE device.
-
- If you have one or more IDE drives, say Y or M here. If your system
- has no IDE drives, or if memory requirements are really tight, you
- could say N here, and select the "Old hard disk driver" below
- instead to save about 13 KB of memory in the kernel.
-
-if BLK_DEV_IDE
-
comment "Please see Documentation/ide/ide.txt for help/info on IDE drives"

config IDE_TIMINGS
@@ -348,7 +316,7 @@ config BLK_DEV_IDEPCI

config IDEPCI_PCIBUS_ORDER
bool "Probe IDE PCI devices in the PCI bus order (DEPRECATED)"
- depends on BLK_DEV_IDE=y && BLK_DEV_IDEPCI
+ depends on IDE=y && BLK_DEV_IDEPCI
default y
help
Probe IDE PCI devices in the order in which they appear on the
@@ -729,7 +697,7 @@ endif

config BLK_DEV_IDE_PMAC
tristate "PowerMac on-board IDE support"
- depends on PPC_PMAC && IDE=y && BLK_DEV_IDE=y
+ depends on PPC_PMAC && IDE=y
select IDE_TIMINGS
help
This driver provides support for the on-board IDE controller on
@@ -963,6 +931,4 @@ config BLK_DEV_IDEDMA
def_bool BLK_DEV_IDEDMA_SFF || BLK_DEV_IDEDMA_PMAC || \
BLK_DEV_IDEDMA_ICS || BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA

-endif
-
endif # IDE
diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile
index 308b8a1..ceaf779 100644
--- a/drivers/ide/Makefile
+++ b/drivers/ide/Makefile
@@ -5,24 +5,25 @@
EXTRA_CFLAGS += -Idrivers/ide

ide-core-y += ide.o ide-ioctls.o ide-io.o ide-iops.o ide-lib.o ide-probe.o \
- ide-taskfile.o ide-pio-blacklist.o
+ ide-taskfile.o ide-park.o ide-pio-blacklist.o

# core IDE code
ide-core-$(CONFIG_IDE_TIMINGS) += ide-timings.o
ide-core-$(CONFIG_IDE_ATAPI) += ide-atapi.o
ide-core-$(CONFIG_BLK_DEV_IDEPCI) += setup-pci.o
ide-core-$(CONFIG_BLK_DEV_IDEDMA) += ide-dma.o
+ide-core-$(CONFIG_BLK_DEV_IDEDMA_SFF) += ide-dma-sff.o
ide-core-$(CONFIG_IDE_PROC_FS) += ide-proc.o
ide-core-$(CONFIG_BLK_DEV_IDEACPI) += ide-acpi.o

-obj-$(CONFIG_BLK_DEV_IDE) += ide-core.o
+obj-$(CONFIG_IDE) += ide-core.o

ifeq ($(CONFIG_IDE_ARM), y)
ide-arm-core-y += arm/ide_arm.o
obj-y += ide-arm-core.o
endif

-obj-$(CONFIG_BLK_DEV_IDE) += legacy/ pci/
+obj-$(CONFIG_IDE) += legacy/ pci/

obj-$(CONFIG_IDEPCI_PCIBUS_ORDER) += ide-scan-pci.o

@@ -31,15 +32,21 @@ ifeq ($(CONFIG_BLK_DEV_CMD640), y)
obj-y += cmd640-core.o
endif

-obj-$(CONFIG_BLK_DEV_IDE) += ppc/
+obj-$(CONFIG_IDE) += ppc/
obj-$(CONFIG_IDE_H8300) += h8300/
obj-$(CONFIG_IDE_GENERIC) += ide-generic.o
obj-$(CONFIG_BLK_DEV_IDEPNP) += ide-pnp.o

+ide-disk_mod-y += ide-disk.o ide-disk_ioctl.o
ide-cd_mod-y += ide-cd.o ide-cd_ioctl.o ide-cd_verbose.o
ide-floppy_mod-y += ide-floppy.o ide-floppy_ioctl.o

-obj-$(CONFIG_BLK_DEV_IDEDISK) += ide-disk.o
+ifeq ($(CONFIG_IDE_PROC_FS), y)
+ ide-disk_mod-y += ide-disk_proc.o
+ ide-floppy_mod-y += ide-floppy_proc.o
+endif
+
+obj-$(CONFIG_BLK_DEV_IDEDISK) += ide-disk_mod.o
obj-$(CONFIG_BLK_DEV_IDECD) += ide-cd_mod.o
obj-$(CONFIG_BLK_DEV_IDEFLOPPY) += ide-floppy_mod.o
obj-$(CONFIG_BLK_DEV_IDETAPE) += ide-tape.o
@@ -54,4 +61,4 @@ ifeq ($(CONFIG_BLK_DEV_PLATFORM), y)
obj-y += ide-platform-core.o
endif

-obj-$(CONFIG_BLK_DEV_IDE) += arm/ mips/
+obj-$(CONFIG_IDE) += arm/ mips/
diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c
index 70f5b16..76bdc9a 100644
--- a/drivers/ide/arm/icside.c
+++ b/drivers/ide/arm/icside.c
@@ -372,25 +372,6 @@ static int icside_dma_test_irq(ide_drive_t *drive)
ICS_ARCIN_V6_INTRSTAT_1)) & 1;
}

-static void icside_dma_timeout(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
-
- printk(KERN_ERR "%s: DMA timeout occurred: ", drive->name);
-
- if (icside_dma_test_irq(drive))
- return;
-
- ide_dump_status(drive, "DMA timeout", hwif->tp_ops->read_status(hwif));
-
- icside_dma_end(drive);
-}
-
-static void icside_dma_lost_irq(ide_drive_t *drive)
-{
- printk(KERN_ERR "%s: IRQ lost\n", drive->name);
-}
-
static int icside_dma_init(ide_hwif_t *hwif, const struct ide_port_info *d)
{
hwif->dmatable_cpu = NULL;
@@ -406,8 +387,8 @@ static const struct ide_dma_ops icside_v6_dma_ops = {
.dma_start = icside_dma_start,
.dma_end = icside_dma_end,
.dma_test_irq = icside_dma_test_irq,
- .dma_timeout = icside_dma_timeout,
- .dma_lost_irq = icside_dma_lost_irq,
+ .dma_timeout = ide_dma_timeout,
+ .dma_lost_irq = ide_dma_lost_irq,
};
#else
#define icside_v6_dma_ops NULL
diff --git a/drivers/ide/h8300/ide-h8300.c b/drivers/ide/h8300/ide-h8300.c
index bde7a58..e2cdd2e 100644
--- a/drivers/ide/h8300/ide-h8300.c
+++ b/drivers/ide/h8300/ide-h8300.c
@@ -80,7 +80,7 @@ static void h8300_tf_load(ide_drive_t *drive, ide_task_t *task)
outb(tf->lbah, io_ports->lbah_addr);

if (task->tf_flags & IDE_TFLAG_OUT_DEVICE)
- outb((tf->device & HIHI) | drive->select.all,
+ outb((tf->device & HIHI) | drive->select,
io_ports->device_addr);
}

diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c
index 2427c38..244a8a0 100644
--- a/drivers/ide/ide-acpi.c
+++ b/drivers/ide/ide-acpi.c
@@ -290,7 +290,7 @@ static int do_drive_get_GTF(ide_drive_t *drive,
DEBPRINT("ENTER: %s at %s, port#: %d, hard_port#: %d\n",
hwif->name, dev->bus_id, port, hwif->channel);

- if (!drive->present) {
+ if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0) {
DEBPRINT("%s drive %d:%d not present\n",
hwif->name, hwif->channel, port);
goto out;
@@ -420,8 +420,9 @@ static int do_drive_set_taskfiles(ide_drive_t *drive,

DEBPRINT("ENTER: %s, hard_port#: %d\n", drive->name, drive->dn);

- if (!drive->present)
+ if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0)
goto out;
+
if (!gtf_count) /* shouldn't be here */
goto out;

@@ -660,7 +661,8 @@ void ide_acpi_set_state(ide_hwif_t *hwif, int on)
if (!drive->acpidata->obj_handle)
drive->acpidata->obj_handle = ide_acpi_drive_get_handle(drive);

- if (drive->acpidata->obj_handle && drive->present) {
+ if (drive->acpidata->obj_handle &&
+ (drive->dev_flags & IDE_DFLAG_PRESENT)) {
acpi_bus_set_power(drive->acpidata->obj_handle,
on? ACPI_STATE_D0: ACPI_STATE_D3);
}
@@ -720,7 +722,7 @@ void ide_acpi_port_init_devices(ide_hwif_t *hwif)

memset(drive->acpidata, 0, sizeof(*drive->acpidata));

- if (!drive->present)
+ if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0)
continue;

err = taskfile_lib_get_identify(drive, drive->acpidata->idbuff);
@@ -745,7 +747,7 @@ void ide_acpi_port_init_devices(ide_hwif_t *hwif)
for (i = 0; i < MAX_DRIVES; i++) {
drive = &hwif->drives[i];

- if (drive->present)
+ if (drive->dev_flags & IDE_DFLAG_PRESENT)
/* Execute ACPI startup code */
ide_acpi_exec_tfs(drive);
}
diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 608c5ba..2e30571 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -124,8 +124,8 @@ EXPORT_SYMBOL_GPL(ide_init_pc);
* the current request, so that it will be processed immediately, on the next
* pass through the driver.
*/
-void ide_queue_pc_head(ide_drive_t *drive, struct gendisk *disk,
- struct ide_atapi_pc *pc, struct request *rq)
+static void ide_queue_pc_head(ide_drive_t *drive, struct gendisk *disk,
+ struct ide_atapi_pc *pc, struct request *rq)
{
blk_rq_init(NULL, rq);
rq->cmd_type = REQ_TYPE_SPECIAL;
@@ -137,7 +137,6 @@ void ide_queue_pc_head(ide_drive_t *drive, struct gendisk *disk,
rq->cmd[13] = REQ_IDETAPE_PC1;
ide_do_drive_cmd(drive, rq);
}
-EXPORT_SYMBOL_GPL(ide_queue_pc_head);

/*
* Add a special packet command request to the tail of the request queue,
@@ -203,25 +202,80 @@ int ide_set_media_lock(ide_drive_t *drive, struct gendisk *disk, int on)
}
EXPORT_SYMBOL_GPL(ide_set_media_lock);

-/* TODO: unify the code thus making some arguments go away */
-ide_startstop_t ide_pc_intr(ide_drive_t *drive, struct ide_atapi_pc *pc,
- ide_handler_t *handler, unsigned int timeout, ide_expiry_t *expiry,
- void (*update_buffers)(ide_drive_t *, struct ide_atapi_pc *),
- void (*retry_pc)(ide_drive_t *), void (*dsc_handle)(ide_drive_t *),
- int (*io_buffers)(ide_drive_t *, struct ide_atapi_pc *, unsigned, int))
+void ide_create_request_sense_cmd(ide_drive_t *drive, struct ide_atapi_pc *pc)
{
+ ide_init_pc(pc);
+ pc->c[0] = REQUEST_SENSE;
+ if (drive->media == ide_floppy) {
+ pc->c[4] = 255;
+ pc->req_xfer = 18;
+ } else {
+ pc->c[4] = 20;
+ pc->req_xfer = 20;
+ }
+}
+EXPORT_SYMBOL_GPL(ide_create_request_sense_cmd);
+
+/*
+ * Called when an error was detected during the last packet command.
+ * We queue a request sense packet command in the head of the request list.
+ */
+void ide_retry_pc(ide_drive_t *drive, struct gendisk *disk)
+{
+ struct request *rq = &drive->request_sense_rq;
+ struct ide_atapi_pc *pc = &drive->request_sense_pc;
+
+ (void)ide_read_error(drive);
+ ide_create_request_sense_cmd(drive, pc);
+ if (drive->media == ide_tape)
+ set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags);
+ ide_queue_pc_head(drive, disk, pc, rq);
+}
+EXPORT_SYMBOL_GPL(ide_retry_pc);
+
+int ide_scsi_expiry(ide_drive_t *drive)
+{
+ struct ide_atapi_pc *pc = drive->pc;
+
+ debug_log("%s called for %lu at %lu\n", __func__,
+ pc->scsi_cmd->serial_number, jiffies);
+
+ pc->flags |= PC_FLAG_TIMEDOUT;
+
+ return 0; /* we do not want the IDE subsystem to retry */
+}
+EXPORT_SYMBOL_GPL(ide_scsi_expiry);
+
+/*
+ * This is the usual interrupt handler which will be called during a packet
+ * command. We will transfer some of the data (as requested by the drive)
+ * and will re-point interrupt handler to us.
+ */
+static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
+{
+ struct ide_atapi_pc *pc = drive->pc;
ide_hwif_t *hwif = drive->hwif;
struct request *rq = hwif->hwgroup->rq;
const struct ide_tp_ops *tp_ops = hwif->tp_ops;
xfer_func_t *xferfunc;
- unsigned int temp;
+ ide_expiry_t *expiry;
+ unsigned int timeout, temp;
u16 bcount;
- u8 stat, ireason, scsi = drive->scsi;
+ u8 stat, ireason, scsi = !!(drive->dev_flags & IDE_DFLAG_SCSI), dsc = 0;

debug_log("Enter %s - interrupt handler\n", __func__);

+ if (scsi) {
+ timeout = ide_scsi_get_timeout(pc);
+ expiry = ide_scsi_expiry;
+ } else {
+ timeout = (drive->media == ide_floppy) ? WAIT_FLOPPY_CMD
+ : WAIT_TAPE_CMD;
+ expiry = NULL;
+ }
+
if (pc->flags & PC_FLAG_TIMEDOUT) {
- drive->pc_callback(drive);
+ drive->pc_callback(drive, 0);
return ide_stopped;
}

@@ -238,8 +292,8 @@ ide_startstop_t ide_pc_intr(ide_drive_t *drive, struct ide_atapi_pc *pc,
pc->flags |= PC_FLAG_DMA_ERROR;
} else {
pc->xferred = pc->req_xfer;
- if (update_buffers)
- update_buffers(drive, pc);
+ if (drive->pc_update_buffers)
+ drive->pc_update_buffers(drive, pc);
}
debug_log("%s: DMA finished\n", drive->name);
}
@@ -276,21 +330,19 @@ ide_startstop_t ide_pc_intr(ide_drive_t *drive, struct ide_atapi_pc *pc,
debug_log("[cmd %x]: check condition\n", rq->cmd[0]);

/* Retry operation */
- retry_pc(drive);
+ ide_retry_pc(drive, rq->rq_disk);

/* queued, but not started */
return ide_stopped;
}
cmd_finished:
pc->error = 0;
- if ((pc->flags & PC_FLAG_WAIT_FOR_DSC) &&
- (stat & ATA_DSC) == 0) {
- dsc_handle(drive);
- return ide_stopped;
- }
+
+ if ((pc->flags & PC_FLAG_WAIT_FOR_DSC) && (stat & ATA_DSC) == 0)
+ dsc = 1;

/* Command finished - Call the callback function */
- drive->pc_callback(drive);
+ drive->pc_callback(drive, dsc);

return ide_stopped;
}
@@ -336,7 +388,8 @@ cmd_finished:
temp = 0;
if (temp) {
if (pc->sg)
- io_buffers(drive, pc, temp, 0);
+ drive->pc_io_buffers(drive, pc,
+ temp, 0);
else
tp_ops->input_data(drive, NULL,
pc->cur_pos, temp);
@@ -348,9 +401,7 @@ cmd_finished:
pc->xferred += temp;
pc->cur_pos += temp;
ide_pad_transfer(drive, 0, bcount - temp);
- ide_set_handler(drive, handler, timeout,
- expiry);
- return ide_started;
+ goto next_irq;
}
debug_log("The device wants to send us more data than "
"expected - allowing transfer\n");
@@ -362,7 +413,7 @@ cmd_finished:
if ((drive->media == ide_floppy && !scsi && !pc->buf) ||
(drive->media == ide_tape && !scsi && pc->bh) ||
(scsi && pc->sg)) {
- int done = io_buffers(drive, pc, bcount,
+ int done = drive->pc_io_buffers(drive, pc, bcount,
!!(pc->flags & PC_FLAG_WRITING));

/* FIXME: don't do partial completions */
@@ -377,12 +428,11 @@ cmd_finished:

debug_log("[cmd %x] transferred %d bytes on that intr.\n",
rq->cmd[0], bcount);
-
+next_irq:
/* And set the interrupt handler again */
- ide_set_handler(drive, handler, timeout, expiry);
+ ide_set_handler(drive, ide_pc_intr, timeout, expiry);
return ide_started;
}
-EXPORT_SYMBOL_GPL(ide_pc_intr);

static u8 ide_read_ireason(ide_drive_t *drive)
{
@@ -418,12 +468,22 @@ static u8 ide_wait_ireason(ide_drive_t *drive, u8 ireason)
return ireason;
}

-ide_startstop_t ide_transfer_pc(ide_drive_t *drive, struct ide_atapi_pc *pc,
- ide_handler_t *handler, unsigned int timeout,
- ide_expiry_t *expiry)
+static int ide_delayed_transfer_pc(ide_drive_t *drive)
{
+ /* Send the actual packet */
+ drive->hwif->tp_ops->output_data(drive, NULL, drive->pc->c, 12);
+
+ /* Timeout for the packet command */
+ return WAIT_FLOPPY_CMD;
+}
+
+static ide_startstop_t ide_transfer_pc(ide_drive_t *drive)
+{
+ struct ide_atapi_pc *pc = drive->pc;
ide_hwif_t *hwif = drive->hwif;
struct request *rq = hwif->hwgroup->rq;
+ ide_expiry_t *expiry;
+ unsigned int timeout;
ide_startstop_t startstop;
u8 ireason;

@@ -434,7 +494,8 @@ ide_startstop_t ide_transfer_pc(ide_drive_t *drive, struct ide_atapi_pc *pc,
}

ireason = ide_read_ireason(drive);
- if (drive->media == ide_tape && !drive->scsi)
+ if (drive->media == ide_tape &&
+ (drive->dev_flags & IDE_DFLAG_SCSI) == 0)
ireason = ide_wait_ireason(drive, ireason);

if ((ireason & ATAPI_COD) == 0 || (ireason & ATAPI_IO)) {
@@ -443,8 +504,27 @@ ide_startstop_t ide_transfer_pc(ide_drive_t *drive, struct ide_atapi_pc *pc,
return ide_do_reset(drive);
}

+ /*
+ * If necessary schedule the packet transfer to occur 'timeout'
+ * miliseconds later in ide_delayed_transfer_pc() after the device
+ * says it's ready for a packet.
+ */
+ if (drive->atapi_flags & IDE_AFLAG_ZIP_DRIVE) {
+ timeout = drive->pc_delay;
+ expiry = &ide_delayed_transfer_pc;
+ } else {
+ if (drive->dev_flags & IDE_DFLAG_SCSI) {
+ timeout = ide_scsi_get_timeout(pc);
+ expiry = ide_scsi_expiry;
+ } else {
+ timeout = (drive->media == ide_floppy) ? WAIT_FLOPPY_CMD
+ : WAIT_TAPE_CMD;
+ expiry = NULL;
+ }
+ }
+
/* Set the interrupt routine */
- ide_set_handler(drive, handler, timeout, expiry);
+ ide_set_handler(drive, ide_pc_intr, timeout, expiry);

/* Begin DMA, if necessary */
if (pc->flags & PC_FLAG_DMA_OK) {
@@ -458,22 +538,22 @@ ide_startstop_t ide_transfer_pc(ide_drive_t *drive, struct ide_atapi_pc *pc,

return ide_started;
}
-EXPORT_SYMBOL_GPL(ide_transfer_pc);

-ide_startstop_t ide_issue_pc(ide_drive_t *drive, struct ide_atapi_pc *pc,
- ide_handler_t *handler, unsigned int timeout,
+ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
ide_expiry_t *expiry)
{
+ struct ide_atapi_pc *pc = drive->pc;
ide_hwif_t *hwif = drive->hwif;
+ u32 tf_flags;
u16 bcount;
- u8 dma = 0;
+ u8 scsi = !!(drive->dev_flags & IDE_DFLAG_SCSI);

/* We haven't transferred any data yet */
pc->xferred = 0;
pc->cur_pos = pc->buf;

/* Request to transfer the entire buffer at once */
- if (drive->media == ide_tape && !drive->scsi)
+ if (drive->media == ide_tape && scsi == 0)
bcount = pc->req_xfer;
else
bcount = min(pc->req_xfer, 63 * 1024);
@@ -483,28 +563,35 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, struct ide_atapi_pc *pc,
ide_dma_off(drive);
}

- if ((pc->flags & PC_FLAG_DMA_OK) && drive->using_dma) {
- if (drive->scsi)
+ if ((pc->flags & PC_FLAG_DMA_OK) &&
+ (drive->dev_flags & IDE_DFLAG_USING_DMA)) {
+ if (scsi)
hwif->sg_mapped = 1;
- dma = !hwif->dma_ops->dma_setup(drive);
- if (drive->scsi)
+ drive->dma = !hwif->dma_ops->dma_setup(drive);
+ if (scsi)
hwif->sg_mapped = 0;
}

- if (!dma)
+ if (!drive->dma)
pc->flags &= ~PC_FLAG_DMA_OK;

- ide_pktcmd_tf_load(drive, drive->scsi ? 0 : IDE_TFLAG_OUT_DEVICE,
- bcount, dma);
+ if (scsi)
+ tf_flags = 0;
+ else if (drive->media == ide_cdrom || drive->media == ide_optical)
+ tf_flags = IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL;
+ else
+ tf_flags = IDE_TFLAG_OUT_DEVICE;
+
+ ide_pktcmd_tf_load(drive, tf_flags, bcount, drive->dma);

/* Issue the packet command */
if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) {
- ide_execute_command(drive, ATA_CMD_PACKET, handler,
+ ide_execute_command(drive, ATA_CMD_PACKET, ide_transfer_pc,
timeout, NULL);
return ide_started;
} else {
ide_execute_pkt_cmd(drive);
- return (*handler)(drive);
+ return ide_transfer_pc(drive);
}
}
EXPORT_SYMBOL_GPL(ide_issue_pc);
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 465a92c..3308b1c 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -23,6 +23,9 @@
* Documentation/ide/ChangeLog.ide-cd.1994-2004
*/

+#define DRV_NAME "ide-cd"
+#define PFX DRV_NAME ": "
+
#define IDECD_VERSION "5.00"

#include <linux/module.h>
@@ -50,12 +53,15 @@

#include "ide-cd.h"

-static DEFINE_MUTEX(idecd_ref_mutex);
+#define IDECD_DEBUG_LOG 1

-#define to_ide_cd(obj) container_of(obj, struct cdrom_info, kref)
+#if IDECD_DEBUG_LOG
+#define ide_debug_log(lvl, fmt, args...) __ide_debug_log(lvl, fmt, args)
+#else
+#define ide_debug_log(lvl, fmt, args...) do {} while (0)
+#endif

-#define ide_cd_g(disk) \
- container_of((disk)->private_data, struct cdrom_info, driver)
+static DEFINE_MUTEX(idecd_ref_mutex);

static void ide_cd_release(struct kref *);

@@ -64,7 +70,7 @@ static struct cdrom_info *ide_cd_get(struct gendisk *disk)
struct cdrom_info *cd = NULL;

mutex_lock(&idecd_ref_mutex);
- cd = ide_cd_g(disk);
+ cd = ide_drv_g(disk, cdrom_info);
if (cd) {
if (ide_device_get(cd->drive))
cd = NULL;
@@ -102,6 +108,9 @@ static int cdrom_log_sense(ide_drive_t *drive, struct request *rq,
{
int log = 0;

+ ide_debug_log(IDE_DBG_SENSE, "Call %s, sense_key: 0x%x\n", __func__,
+ sense->sense_key);
+
if (!sense || !rq || (rq->cmd_flags & REQ_QUIET))
return 0;

@@ -150,6 +159,14 @@ static void cdrom_analyze_sense_data(ide_drive_t *drive,
unsigned long bio_sectors;
struct cdrom_info *info = drive->driver_data;

+ ide_debug_log(IDE_DBG_SENSE, "Call %s, error_code: 0x%x, "
+ "sense_key: 0x%x\n", __func__, sense->error_code,
+ sense->sense_key);
+
+ if (failed_command)
+ ide_debug_log(IDE_DBG_SENSE, "%s: failed cmd: 0x%x\n",
+ __func__, failed_command->cmd[0]);
+
if (!cdrom_log_sense(drive, failed_command, sense))
return;

@@ -200,6 +217,8 @@ static void cdrom_queue_request_sense(ide_drive_t *drive, void *sense,
struct cdrom_info *info = drive->driver_data;
struct request *rq = &info->request_sense_request;

+ ide_debug_log(IDE_DBG_SENSE, "Call %s\n", __func__);
+
if (sense == NULL)
sense = &info->sense_data;

@@ -219,6 +238,10 @@ static void cdrom_queue_request_sense(ide_drive_t *drive, void *sense,
/* NOTE! Save the failed command in "rq->buffer" */
rq->buffer = (void *) failed_command;

+ if (failed_command)
+ ide_debug_log(IDE_DBG_SENSE, "failed_cmd: 0x%x\n",
+ failed_command->cmd[0]);
+
ide_do_drive_cmd(drive, rq);
}

@@ -227,6 +250,10 @@ static void cdrom_end_request(ide_drive_t *drive, int uptodate)
struct request *rq = HWGROUP(drive)->rq;
int nsectors = rq->hard_cur_sectors;

+ ide_debug_log(IDE_DBG_FUNC, "Call %s, cmd: 0x%x, uptodate: 0x%x, "
+ "nsectors: %d\n", __func__, rq->cmd[0], uptodate,
+ nsectors);
+
if (blk_sense_request(rq) && uptodate) {
/*
* For REQ_TYPE_SENSE, "rq->buffer" points to the original
@@ -269,6 +296,9 @@ static void cdrom_end_request(ide_drive_t *drive, int uptodate)
if (!nsectors)
nsectors = 1;

+ ide_debug_log(IDE_DBG_FUNC, "Exit %s, uptodate: 0x%x, nsectors: %d\n",
+ __func__, uptodate, nsectors);
+
ide_end_request(drive, uptodate, nsectors);
}

@@ -304,11 +334,15 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret)
sense_key = err >> 4;

if (rq == NULL) {
- printk(KERN_ERR "%s: missing rq in %s\n",
+ printk(KERN_ERR PFX "%s: missing rq in %s\n",
drive->name, __func__);
return 1;
}

+ ide_debug_log(IDE_DBG_RQ, "%s: stat: 0x%x, good_stat: 0x%x, "
+ "rq->cmd_type: 0x%x, err: 0x%x\n", __func__, stat,
+ good_stat, rq->cmd_type, err);
+
if (blk_sense_request(rq)) {
/*
* We got an error trying to get sense info from the drive
@@ -374,7 +408,8 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret)
cdrom_saw_media_change(drive);

/* fail the request */
- printk(KERN_ERR "%s: tray open\n", drive->name);
+ printk(KERN_ERR PFX "%s: tray open\n",
+ drive->name);
do_end_request = 1;
} else {
struct cdrom_info *info = drive->driver_data;
@@ -460,7 +495,7 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret)
if (stat & ATA_ERR)
cdrom_queue_request_sense(drive, NULL, NULL);
} else {
- blk_dump_rq_flags(rq, "ide-cd: bad rq");
+ blk_dump_rq_flags(rq, PFX "bad rq");
cdrom_end_request(drive, 0);
}

@@ -488,6 +523,9 @@ static int cdrom_timer_expiry(ide_drive_t *drive)
struct request *rq = HWGROUP(drive)->rq;
unsigned long wait = 0;

+ ide_debug_log(IDE_DBG_RQ, "Call %s: rq->cmd[0]: 0x%x\n", __func__,
+ rq->cmd[0]);
+
/*
* Some commands are *slow* and normally take a long time to complete.
* Usually we can use the ATAPI "disconnect" to bypass this, but not all
@@ -504,7 +542,7 @@ static int cdrom_timer_expiry(ide_drive_t *drive)
break;
default:
if (!(rq->cmd_flags & REQ_QUIET))
- printk(KERN_INFO "ide-cd: cmd 0x%x timed out\n",
+ printk(KERN_INFO PFX "cmd 0x%x timed out\n",
rq->cmd[0]);
wait = 0;
break;
@@ -524,20 +562,21 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive,
int xferlen,
ide_handler_t *handler)
{
- struct cdrom_info *info = drive->driver_data;
ide_hwif_t *hwif = drive->hwif;

+ ide_debug_log(IDE_DBG_PC, "Call %s, xferlen: %d\n", __func__, xferlen);
+
/* FIXME: for Virtual DMA we must check harder */
- if (info->dma)
- info->dma = !hwif->dma_ops->dma_setup(drive);
+ if (drive->dma)
+ drive->dma = !hwif->dma_ops->dma_setup(drive);

/* set up the controller registers */
ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL,
- xferlen, info->dma);
+ xferlen, drive->dma);

if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) {
/* waiting for CDB interrupt, not DMA yet. */
- if (info->dma)
+ if (drive->dma)
drive->waiting_for_dma = 0;

/* packet command */
@@ -564,9 +603,10 @@ static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive,
{
ide_hwif_t *hwif = drive->hwif;
int cmd_len;
- struct cdrom_info *info = drive->driver_data;
ide_startstop_t startstop;

+ ide_debug_log(IDE_DBG_PC, "Call %s\n", __func__);
+
if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) {
/*
* Here we should have been called after receiving an interrupt
@@ -578,7 +618,7 @@ static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive,
return ide_stopped;

/* ok, next interrupt will be DMA interrupt */
- if (info->dma)
+ if (drive->dma)
drive->waiting_for_dma = 1;
} else {
/* otherwise, we must wait for DRQ to get set */
@@ -599,7 +639,7 @@ static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive,
hwif->tp_ops->output_data(drive, NULL, rq->cmd, cmd_len);

/* start the DMA if need be */
- if (info->dma)
+ if (drive->dma)
hwif->dma_ops->dma_start(drive);

return ide_started;
@@ -615,6 +655,9 @@ static int ide_cd_check_ireason(ide_drive_t *drive, struct request *rq,
{
ide_hwif_t *hwif = drive->hwif;

+ ide_debug_log(IDE_DBG_FUNC, "Call %s, ireason: 0x%x, rw: 0x%x\n",
+ __func__, ireason, rw);
+
/*
* ireason == 0: the drive wants to receive data from us
* ireason == 2: the drive is expecting to transfer data to us
@@ -624,7 +667,7 @@ static int ide_cd_check_ireason(ide_drive_t *drive, struct request *rq,
else if (ireason == (rw << 1)) {

/* whoops... */
- printk(KERN_ERR "%s: %s: wrong transfer direction!\n",
+ printk(KERN_ERR PFX "%s: %s: wrong transfer direction!\n",
drive->name, __func__);

ide_pad_transfer(drive, rw, len);
@@ -637,7 +680,7 @@ static int ide_cd_check_ireason(ide_drive_t *drive, struct request *rq,
return 0;
} else {
/* drive wants a command packet, or invalid ireason... */
- printk(KERN_ERR "%s: %s: bad interrupt reason 0x%02x\n",
+ printk(KERN_ERR PFX "%s: %s: bad interrupt reason 0x%02x\n",
drive->name, __func__, ireason);
}

@@ -654,17 +697,19 @@ static int ide_cd_check_ireason(ide_drive_t *drive, struct request *rq,
*/
static int ide_cd_check_transfer_size(ide_drive_t *drive, int len)
{
+ ide_debug_log(IDE_DBG_FUNC, "Call %s, len: %d\n", __func__, len);
+
if ((len % SECTOR_SIZE) == 0)
return 0;

- printk(KERN_ERR "%s: %s: Bad transfer size %d\n",
- drive->name, __func__, len);
+ printk(KERN_ERR PFX "%s: %s: Bad transfer size %d\n", drive->name,
+ __func__, len);

if (drive->atapi_flags & IDE_AFLAG_LIMIT_NFRAMES)
- printk(KERN_ERR " This drive is not supported by "
- "this version of the driver\n");
+ printk(KERN_ERR PFX "This drive is not supported by this "
+ "version of the driver\n");
else {
- printk(KERN_ERR " Trying to limit transfer sizes\n");
+ printk(KERN_ERR PFX "Trying to limit transfer sizes\n");
drive->atapi_flags |= IDE_AFLAG_LIMIT_NFRAMES;
}

@@ -676,6 +721,9 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *);
static ide_startstop_t ide_cd_prepare_rw_request(ide_drive_t *drive,
struct request *rq)
{
+ ide_debug_log(IDE_DBG_RQ, "Call %s: rq->cmd_flags: 0x%x\n", __func__,
+ rq->cmd_flags);
+
if (rq_data_dir(rq) == READ) {
unsigned short sectors_per_frame =
queue_hardsect_size(drive->queue) >> SECTOR_BITS;
@@ -695,7 +743,7 @@ static ide_startstop_t ide_cd_prepare_rw_request(ide_drive_t *drive,
/* sanity check... */
if (rq->current_nr_sectors !=
bio_cur_sectors(rq->bio)) {
- printk(KERN_ERR "%s: %s: buffer botch (%u)\n",
+ printk(KERN_ERR PFX "%s: %s: buffer botch (%u)\n",
drive->name, __func__,
rq->current_nr_sectors);
cdrom_end_request(drive, 0);
@@ -704,11 +752,7 @@ static ide_startstop_t ide_cd_prepare_rw_request(ide_drive_t *drive,
rq->current_nr_sectors += nskip;
}
}
-#if 0
- else
- /* the immediate bit */
- rq->cmd[1] = 1 << 3;
-#endif
+
/* set up the command */
rq->timeout = ATAPI_WAIT_PC;

@@ -739,6 +783,8 @@ static ide_startstop_t cdrom_seek_intr(ide_drive_t *drive)
int stat;
static int retry = 10;

+ ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
+
if (cdrom_decode_status(drive, 0, &stat))
return ide_stopped;

@@ -746,7 +792,7 @@ static ide_startstop_t cdrom_seek_intr(ide_drive_t *drive)

if (retry && time_after(jiffies, info->start_seek + IDECD_SEEK_TIMER)) {
if (--retry == 0)
- drive->dsc_overlap = 0;
+ drive->dev_flags &= ~IDE_DFLAG_DSC_OVERLAP;
}
return ide_stopped;
}
@@ -755,6 +801,8 @@ static void ide_cd_prepare_seek_request(ide_drive_t *drive, struct request *rq)
{
sector_t frame = rq->sector;

+ ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
+
sector_div(frame, queue_hardsect_size(drive->queue) >> SECTOR_BITS);

memset(rq->cmd, 0, BLK_MAX_CDB);
@@ -775,8 +823,11 @@ static ide_startstop_t cdrom_start_seek_continuation(ide_drive_t *drive)
* Fix up a possibly partially-processed request so that we can start it over
* entirely, or even put it back on the request queue.
*/
-static void restore_request(struct request *rq)
+static void ide_cd_restore_request(ide_drive_t *drive, struct request *rq)
{
+
+ ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
+
if (rq->buffer != bio_data(rq->bio)) {
sector_t n =
(rq->buffer - (char *)bio_data(rq->bio)) / SECTOR_SIZE;
@@ -795,8 +846,11 @@ static void restore_request(struct request *rq)
/*
* All other packet commands.
*/
-static void ide_cd_request_sense_fixup(struct request *rq)
+static void ide_cd_request_sense_fixup(ide_drive_t *drive, struct request *rq)
{
+
+ ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
+
/*
* Some of the trailing request sense fields are optional,
* and some drives don't send them. Sigh.
@@ -822,6 +876,10 @@ int ide_cd_queue_pc(ide_drive_t *drive, const unsigned char *cmd,
if (!sense)
sense = &local_sense;

+ ide_debug_log(IDE_DBG_PC, "Call %s, rq->cmd[0]: 0x%x, write: 0x%x, "
+ "timeout: %d, cmd_flags: 0x%x\n", __func__, cmd[0], write,
+ timeout, cmd_flags);
+
/* start of retry loop */
do {
struct request *rq;
@@ -895,7 +953,6 @@ static int cdrom_newpc_intr_dummy_cb(struct request *rq)
static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
- struct cdrom_info *info = drive->driver_data;
struct request *rq = HWGROUP(drive)->rq;
xfer_func_t *xferfunc;
ide_expiry_t *expiry = NULL;
@@ -905,13 +962,16 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
u16 len;
u8 ireason;

+ ide_debug_log(IDE_DBG_PC, "Call %s, rq->cmd[0]: 0x%x, write: 0x%x\n",
+ __func__, rq->cmd[0], write);
+
/* check for errors */
- dma = info->dma;
+ dma = drive->dma;
if (dma) {
- info->dma = 0;
+ drive->dma = 0;
dma_error = hwif->dma_ops->dma_end(drive);
if (dma_error) {
- printk(KERN_ERR "%s: DMA %s error\n", drive->name,
+ printk(KERN_ERR PFX "%s: DMA %s error\n", drive->name,
write ? "write" : "read");
ide_dma_off(drive);
}
@@ -937,6 +997,9 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
if (thislen > len)
thislen = len;

+ ide_debug_log(IDE_DBG_PC, "%s: DRQ: stat: 0x%x, thislen: %d\n",
+ __func__, stat, thislen);
+
/* If DRQ is clear, the command has completed. */
if ((stat & ATA_DRQ) == 0) {
if (blk_fs_request(rq)) {
@@ -946,7 +1009,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
*/
uptodate = 1;
if (rq->current_nr_sectors > 0) {
- printk(KERN_ERR "%s: %s: data underrun "
+ printk(KERN_ERR PFX "%s: %s: data underrun "
"(%d blocks)\n",
drive->name, __func__,
rq->current_nr_sectors);
@@ -957,7 +1020,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
cdrom_end_request(drive, uptodate);
return ide_stopped;
} else if (!blk_pc_request(rq)) {
- ide_cd_request_sense_fixup(rq);
+ ide_cd_request_sense_fixup(drive, rq);
/* complain if we still have data left to transfer */
uptodate = rq->data_len ? 0 : 1;
}
@@ -1000,6 +1063,9 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
xferfunc = hwif->tp_ops->input_data;
}

+ ide_debug_log(IDE_DBG_PC, "%s: data transfer, rq->cmd_type: 0x%x, "
+ "ireason: 0x%x\n", __func__, rq->cmd_type, ireason);
+
/* transfer data */
while (thislen > 0) {
u8 *ptr = blk_fs_request(rq) ? NULL : rq->data;
@@ -1024,7 +1090,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
*/
ide_pad_transfer(drive, 0, thislen);
else {
- printk(KERN_ERR "%s: confused, missing data\n",
+ printk(KERN_ERR PFX "%s: confused, missing data\n",
drive->name);
blk_dump_rq_flags(rq, rq_data_dir(rq)
? "cdrom_newpc_intr, write"
@@ -1111,6 +1177,9 @@ static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq)
unsigned short sectors_per_frame =
queue_hardsect_size(drive->queue) >> SECTOR_BITS;

+ ide_debug_log(IDE_DBG_RQ, "Call %s, write: 0x%x, secs_per_frame: %u\n",
+ __func__, write, sectors_per_frame);
+
if (write) {
/* disk has become write protected */
if (get_disk_ro(cd->disk)) {
@@ -1122,7 +1191,7 @@ static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq)
* We may be retrying this request after an error. Fix up any
* weirdness which might be present in the request packet.
*/
- restore_request(rq);
+ ide_cd_restore_request(drive, rq);
}

/* use DMA, if possible / writes *must* be hardware frame aligned */
@@ -1132,9 +1201,9 @@ static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq)
cdrom_end_request(drive, 0);
return ide_stopped;
}
- cd->dma = 0;
+ drive->dma = 0;
} else
- cd->dma = drive->using_dma;
+ drive->dma = !!(drive->dev_flags & IDE_DFLAG_USING_DMA);

if (write)
cd->devinfo.media_written = 1;
@@ -1151,14 +1220,16 @@ static ide_startstop_t cdrom_do_newpc_cont(ide_drive_t *drive)

static void cdrom_do_block_pc(ide_drive_t *drive, struct request *rq)
{
- struct cdrom_info *info = drive->driver_data;
+
+ ide_debug_log(IDE_DBG_PC, "Call %s, rq->cmd_type: 0x%x\n", __func__,
+ rq->cmd_type);

if (blk_pc_request(rq))
rq->cmd_flags |= REQ_QUIET;
else
rq->cmd_flags &= ~REQ_FAILED;

- info->dma = 0;
+ drive->dma = 0;

/* sg request */
if (rq->bio || ((rq->cmd_type == REQ_TYPE_ATA_PC) && rq->data_len)) {
@@ -1171,7 +1242,7 @@ static void cdrom_do_block_pc(ide_drive_t *drive, struct request *rq)
else
buf = rq->data;

- info->dma = drive->using_dma;
+ drive->dma = !!(drive->dev_flags & IDE_DFLAG_USING_DMA);

/*
* check if dma is safe
@@ -1182,7 +1253,7 @@ static void cdrom_do_block_pc(ide_drive_t *drive, struct request *rq)
alignment = queue_dma_alignment(q) | q->dma_pad_mask;
if ((unsigned long)buf & alignment || rq->data_len & alignment
|| object_is_on_stack(buf))
- info->dma = 0;
+ drive->dma = 0;
}
}

@@ -1196,6 +1267,9 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
ide_handler_t *fn;
int xferlen;

+ ide_debug_log(IDE_DBG_RQ, "Call %s, rq->cmd_type: 0x%x, block: %llu\n",
+ __func__, rq->cmd_type, (unsigned long long)block);
+
if (blk_fs_request(rq)) {
if (drive->atapi_flags & IDE_AFLAG_SEEKING) {
ide_hwif_t *hwif = drive->hwif;
@@ -1208,7 +1282,7 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
IDECD_SEEK_TIMER);
return ide_stopped;
}
- printk(KERN_ERR "%s: DSC timeout\n",
+ printk(KERN_ERR PFX "%s: DSC timeout\n",
drive->name);
}
drive->atapi_flags &= ~IDE_AFLAG_SEEKING;
@@ -1216,11 +1290,11 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
if (rq_data_dir(rq) == READ &&
IDE_LARGE_SEEK(info->last_block, block,
IDECD_SEEK_THRESHOLD) &&
- drive->dsc_overlap) {
+ (drive->dev_flags & IDE_DFLAG_DSC_OVERLAP)) {
xferlen = 0;
fn = cdrom_start_seek_continuation;

- info->dma = 0;
+ drive->dma = 0;
info->start_seek = jiffies;

ide_cd_prepare_seek_request(drive, rq);
@@ -1249,7 +1323,7 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
cdrom_end_request(drive, 1);
return ide_stopped;
} else {
- blk_dump_rq_flags(rq, "ide-cd bad flags");
+ blk_dump_rq_flags(rq, DRV_NAME " bad flags");
cdrom_end_request(drive, 0);
return ide_stopped;
}
@@ -1279,6 +1353,8 @@ int cdrom_check_status(ide_drive_t *drive, struct request_sense *sense)
struct cdrom_device_info *cdi = &info->devinfo;
unsigned char cmd[BLK_MAX_CDB];

+ ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
+
memset(cmd, 0, BLK_MAX_CDB);
cmd[0] = GPCMD_TEST_UNIT_READY;

@@ -1305,6 +1381,8 @@ static int cdrom_read_capacity(ide_drive_t *drive, unsigned long *capacity,
unsigned len = sizeof(capbuf);
u32 blocklen;

+ ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
+
memset(cmd, 0, BLK_MAX_CDB);
cmd[0] = GPCMD_READ_CDVD_CAPACITY;

@@ -1324,10 +1402,10 @@ static int cdrom_read_capacity(ide_drive_t *drive, unsigned long *capacity,
case 4096:
break;
default:
- printk(KERN_ERR "%s: weird block size %u\n",
- drive->name, blocklen);
- printk(KERN_ERR "%s: default to 2kb block size\n",
- drive->name);
+ printk(KERN_ERR PFX "%s: weird block size %u\n",
+ drive->name, blocklen);
+ printk(KERN_ERR PFX "%s: default to 2kb block size\n",
+ drive->name);
blocklen = 2048;
break;
}
@@ -1343,6 +1421,8 @@ static int cdrom_read_tocentry(ide_drive_t *drive, int trackno, int msf_flag,
{
unsigned char cmd[BLK_MAX_CDB];

+ ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
+
memset(cmd, 0, BLK_MAX_CDB);

cmd[0] = GPCMD_READ_TOC_PMA_ATIP;
@@ -1371,11 +1451,13 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense)
long last_written;
unsigned long sectors_per_frame = SECTORS_PER_FRAME;

+ ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
+
if (toc == NULL) {
/* try to allocate space */
toc = kmalloc(sizeof(struct atapi_toc), GFP_KERNEL);
if (toc == NULL) {
- printk(KERN_ERR "%s: No cdrom TOC buffer!\n",
+ printk(KERN_ERR PFX "%s: No cdrom TOC buffer!\n",
drive->name);
return -ENOMEM;
}
@@ -1531,6 +1613,8 @@ int ide_cdrom_get_capabilities(ide_drive_t *drive, u8 *buf)
struct packet_command cgc;
int stat, attempts = 3, size = ATAPI_CAPABILITIES_PAGE_SIZE;

+ ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
+
if ((drive->atapi_flags & IDE_AFLAG_FULL_CAPS_PAGE) == 0)
size -= ATAPI_CAPABILITIES_PAGE_PAD_SIZE;

@@ -1549,6 +1633,8 @@ void ide_cdrom_update_speed(ide_drive_t *drive, u8 *buf)
struct cdrom_info *cd = drive->driver_data;
u16 curspeed, maxspeed;

+ ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
+
if (drive->atapi_flags & IDE_AFLAG_LE_SPEED_FIELDS) {
curspeed = le16_to_cpup((__le16 *)&buf[8 + 14]);
maxspeed = le16_to_cpup((__le16 *)&buf[8 + 8]);
@@ -1589,6 +1675,8 @@ static int ide_cdrom_register(ide_drive_t *drive, int nslots)
struct cdrom_info *info = drive->driver_data;
struct cdrom_device_info *devinfo = &info->devinfo;

+ ide_debug_log(IDE_DBG_PROBE, "Call %s, nslots: %d\n", __func__, nslots);
+
devinfo->ops = &ide_cdrom_dops;
devinfo->speed = info->current_speed;
devinfo->capacity = nslots;
@@ -1610,13 +1698,17 @@ static int ide_cdrom_probe_capabilities(ide_drive_t *drive)
mechtype_t mechtype;
int nslots = 1;

+ ide_debug_log(IDE_DBG_PROBE, "Call %s, drive->media: 0x%x, "
+ "drive->atapi_flags: 0x%lx\n", __func__, drive->media,
+ drive->atapi_flags);
+
cdi->mask = (CDC_CD_R | CDC_CD_RW | CDC_DVD | CDC_DVD_R |
CDC_DVD_RAM | CDC_SELECT_DISC | CDC_PLAY_AUDIO |
CDC_MO_DRIVE | CDC_RAM);

if (drive->media == ide_optical) {
cdi->mask &= ~(CDC_MO_DRIVE | CDC_RAM);
- printk(KERN_ERR "%s: ATAPI magneto-optical drive\n",
+ printk(KERN_ERR PFX "%s: ATAPI magneto-optical drive\n",
drive->name);
return nslots;
}
@@ -1674,7 +1766,7 @@ static int ide_cdrom_probe_capabilities(ide_drive_t *drive)

ide_cdrom_update_speed(drive, buf);

- printk(KERN_INFO "%s: ATAPI", drive->name);
+ printk(KERN_INFO PFX "%s: ATAPI", drive->name);

/* don't print speed if the drive reported 0 */
if (cd->max_speed)
@@ -1697,7 +1789,8 @@ static int ide_cdrom_probe_capabilities(ide_drive_t *drive)
else
printk(KERN_CONT " drive");

- printk(KERN_CONT ", %dkB Cache\n", be16_to_cpup((__be16 *)&buf[8 + 12]));
+ printk(KERN_CONT ", %dkB Cache\n",
+ be16_to_cpup((__be16 *)&buf[8 + 12]));

return nslots;
}
@@ -1809,7 +1902,7 @@ static ide_proc_entry_t idecd_proc[] = {
{ NULL, 0, NULL, NULL }
};

-ide_devset_rw_field(dsc_overlap, dsc_overlap);
+ide_devset_rw_flag(dsc_overlap, IDE_DFLAG_DSC_OVERLAP);

static const struct ide_proc_devset idecd_settings[] = {
IDE_PROC_DEVSET(dsc_overlap, 0, 1),
@@ -1884,6 +1977,8 @@ static int ide_cdrom_setup(ide_drive_t *drive)
char *fw_rev = (char *)&id[ATA_ID_FW_REV];
int nslots;

+ ide_debug_log(IDE_DBG_PROBE, "Call %s\n", __func__);
+
blk_queue_prep_rq(drive->queue, ide_cdrom_prep_fn);
blk_queue_dma_alignment(drive->queue, 31);
blk_queue_update_dma_pad(drive->queue, 15);
@@ -1891,14 +1986,9 @@ static int ide_cdrom_setup(ide_drive_t *drive)
if (!drive->queue->unplug_delay)
drive->queue->unplug_delay = 1;

- drive->special.all = 0;
-
drive->atapi_flags = IDE_AFLAG_MEDIA_CHANGED | IDE_AFLAG_NO_EJECT |
ide_cd_flags(id);

- if ((id[ATA_ID_CONFIG] & 0x0060) == 0x20)
- drive->atapi_flags |= IDE_AFLAG_DRQ_INTERRUPT;
-
if ((drive->atapi_flags & IDE_AFLAG_VERTOS_300_SSD) &&
fw_rev[4] == '1' && fw_rev[6] <= '2')
drive->atapi_flags |= (IDE_AFLAG_TOCTRACKS_AS_BCD |
@@ -1915,10 +2005,13 @@ static int ide_cdrom_setup(ide_drive_t *drive)
/* set correct block size */
blk_queue_hardsect_size(drive->queue, CD_FRAMESIZE);

- drive->dsc_overlap = (drive->next != drive);
+ if (drive->next != drive)
+ drive->dev_flags |= IDE_DFLAG_DSC_OVERLAP;
+ else
+ drive->dev_flags &= ~IDE_DFLAG_DSC_OVERLAP;

if (ide_cdrom_register(drive, nslots)) {
- printk(KERN_ERR "%s: %s failed to register device with the"
+ printk(KERN_ERR PFX "%s: %s failed to register device with the"
" cdrom driver.\n", drive->name, __func__);
cd->devinfo.handle = NULL;
return 1;
@@ -1932,6 +2025,8 @@ static void ide_cd_remove(ide_drive_t *drive)
{
struct cdrom_info *info = drive->driver_data;

+ ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
+
ide_proc_unregister_driver(drive, info->driver);

del_gendisk(info->disk);
@@ -1941,15 +2036,17 @@ static void ide_cd_remove(ide_drive_t *drive)

static void ide_cd_release(struct kref *kref)
{
- struct cdrom_info *info = to_ide_cd(kref);
+ struct cdrom_info *info = to_ide_drv(kref, cdrom_info);
struct cdrom_device_info *devinfo = &info->devinfo;
ide_drive_t *drive = info->drive;
struct gendisk *g = info->disk;

+ ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
+
kfree(info->toc);
if (devinfo->handle == drive)
unregister_cdrom(devinfo);
- drive->dsc_overlap = 0;
+ drive->dev_flags &= ~IDE_DFLAG_DSC_OVERLAP;
drive->driver_data = NULL;
blk_queue_prep_rq(drive->queue, NULL);
g->private_data = NULL;
@@ -1968,7 +2065,6 @@ static ide_driver_t ide_cdrom_driver = {
.probe = ide_cd_probe,
.remove = ide_cd_remove,
.version = IDECD_VERSION,
- .media = ide_cdrom,
.do_request = ide_cd_do_request,
.end_request = ide_end_request,
.error = __ide_error,
@@ -1999,7 +2095,7 @@ static int idecd_open(struct inode *inode, struct file *file)
static int idecd_release(struct inode *inode, struct file *file)
{
struct gendisk *disk = inode->i_bdev->bd_disk;
- struct cdrom_info *info = ide_cd_g(disk);
+ struct cdrom_info *info = ide_drv_g(disk, cdrom_info);

cdrom_release(&info->devinfo, file);

@@ -2051,7 +2147,7 @@ static int idecd_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
struct block_device *bdev = inode->i_bdev;
- struct cdrom_info *info = ide_cd_g(bdev->bd_disk);
+ struct cdrom_info *info = ide_drv_g(bdev->bd_disk, cdrom_info);
int err;

switch (cmd) {
@@ -2072,13 +2168,13 @@ static int idecd_ioctl(struct inode *inode, struct file *file,

static int idecd_media_changed(struct gendisk *disk)
{
- struct cdrom_info *info = ide_cd_g(disk);
+ struct cdrom_info *info = ide_drv_g(disk, cdrom_info);
return cdrom_media_changed(&info->devinfo);
}

static int idecd_revalidate_disk(struct gendisk *disk)
{
- struct cdrom_info *info = ide_cd_g(disk);
+ struct cdrom_info *info = ide_drv_g(disk, cdrom_info);
struct request_sense sense;

ide_cd_read_toc(info->drive, &sense);
@@ -2097,8 +2193,11 @@ static struct block_device_operations idecd_ops = {

/* module options */
static char *ignore;
-
module_param(ignore, charp, 0400);
+
+static unsigned long debug_mask;
+module_param(debug_mask, ulong, 0644);
+
MODULE_DESCRIPTION("ATAPI CD-ROM Driver");

static int ide_cd_probe(ide_drive_t *drive)
@@ -2107,6 +2206,10 @@ static int ide_cd_probe(ide_drive_t *drive)
struct gendisk *g;
struct request_sense sense;

+ ide_debug_log(IDE_DBG_PROBE, "Call %s, drive->driver_req: %s, "
+ "drive->media: 0x%x\n", __func__, drive->driver_req,
+ drive->media);
+
if (!strstr("ide-cdrom", drive->driver_req))
goto failed;

@@ -2116,14 +2219,17 @@ static int ide_cd_probe(ide_drive_t *drive)
/* skip drives that we were told to ignore */
if (ignore != NULL) {
if (strstr(ignore, drive->name)) {
- printk(KERN_INFO "ide-cd: ignoring drive %s\n",
+ printk(KERN_INFO PFX "ignoring drive %s\n",
drive->name);
goto failed;
}
}
+
+ drive->debug_mask = debug_mask;
+
info = kzalloc(sizeof(struct cdrom_info), GFP_KERNEL);
if (info == NULL) {
- printk(KERN_ERR "%s: Can't allocate a cdrom structure\n",
+ printk(KERN_ERR PFX "%s: Can't allocate a cdrom structure\n",
drive->name);
goto failed;
}
@@ -2171,6 +2277,7 @@ static void __exit ide_cdrom_exit(void)

static int __init ide_cdrom_init(void)
{
+ printk(KERN_INFO DRV_NAME " driver " IDECD_VERSION "\n");
return driver_register(&ide_cdrom_driver.gen_driver);
}

diff --git a/drivers/ide/ide-cd.h b/drivers/ide/ide-cd.h
index 61a4599..5882b9a 100644
--- a/drivers/ide/ide-cd.h
+++ b/drivers/ide/ide-cd.h
@@ -88,7 +88,6 @@ struct cdrom_info {
struct request_sense sense_data;

struct request request_sense_request;
- int dma;
unsigned long last_block;
unsigned long start_seek;

diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index 01846f2..3853bde 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -45,21 +45,12 @@
#define IDE_DISK_MINORS 0
#endif

-struct ide_disk_obj {
- ide_drive_t *drive;
- ide_driver_t *driver;
- struct gendisk *disk;
- struct kref kref;
- unsigned int openers; /* protected by BKL for now */
-};
+#include "ide-disk.h"

static DEFINE_MUTEX(idedisk_ref_mutex);

#define to_ide_disk(obj) container_of(obj, struct ide_disk_obj, kref)

-#define ide_disk_g(disk) \
- container_of((disk)->private_data, struct ide_disk_obj, driver)
-
static void ide_disk_release(struct kref *);

static struct ide_disk_obj *ide_disk_get(struct gendisk *disk)
@@ -140,9 +131,9 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq,
sector_t block)
{
ide_hwif_t *hwif = HWIF(drive);
- unsigned int dma = drive->using_dma;
u16 nsectors = (u16)rq->nr_sectors;
- u8 lba48 = (drive->addressing == 1) ? 1 : 0;
+ u8 lba48 = !!(drive->dev_flags & IDE_DFLAG_LBA48);
+ u8 dma = !!(drive->dev_flags & IDE_DFLAG_USING_DMA);
ide_task_t task;
struct ide_taskfile *tf = &task.tf;
ide_startstop_t rc;
@@ -162,7 +153,7 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq,
memset(&task, 0, sizeof(task));
task.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;

- if (drive->select.b.lba) {
+ if (drive->dev_flags & IDE_DFLAG_LBA) {
if (lba48) {
pr_debug("%s: LBA=0x%012llx\n", drive->name,
(unsigned long long)block);
@@ -187,6 +178,8 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq,
tf->lbah = block >>= 8;
tf->device = (block >> 8) & 0xf;
}
+
+ tf->device |= ATA_LBA;
} else {
unsigned int sect, head, cyl, track;

@@ -237,7 +230,7 @@ static ide_startstop_t ide_do_rw_disk(ide_drive_t *drive, struct request *rq,
{
ide_hwif_t *hwif = HWIF(drive);

- BUG_ON(drive->blocked);
+ BUG_ON(drive->dev_flags & IDE_DFLAG_BLOCKED);

if (!blk_fs_request(rq)) {
blk_dump_rq_flags(rq, "ide_do_rw_disk - bad command");
@@ -384,139 +377,39 @@ static void idedisk_check_hpa(ide_drive_t *drive)
static void init_idedisk_capacity(ide_drive_t *drive)
{
u16 *id = drive->id;
- /*
- * If this drive supports the Host Protected Area feature set,
- * then we may need to change our opinion about the drive's capacity.
- */
- int hpa = ata_id_hpa_enabled(id);
+ int lba;

if (ata_id_lba48_enabled(id)) {
/* drive speaks 48-bit LBA */
- drive->select.b.lba = 1;
+ lba = 1;
drive->capacity64 = ata_id_u64(id, ATA_ID_LBA_CAPACITY_2);
- if (hpa)
- idedisk_check_hpa(drive);
} else if (ata_id_has_lba(id) && ata_id_is_lba_capacity_ok(id)) {
/* drive speaks 28-bit LBA */
- drive->select.b.lba = 1;
+ lba = 1;
drive->capacity64 = ata_id_u32(id, ATA_ID_LBA_CAPACITY);
- if (hpa)
- idedisk_check_hpa(drive);
} else {
/* drive speaks boring old 28-bit CHS */
+ lba = 0;
drive->capacity64 = drive->cyl * drive->head * drive->sect;
}
-}

-static sector_t idedisk_capacity(ide_drive_t *drive)
-{
- return drive->capacity64;
-}
+ if (lba) {
+ drive->dev_flags |= IDE_DFLAG_LBA;

-#ifdef CONFIG_IDE_PROC_FS
-static int smart_enable(ide_drive_t *drive)
-{
- ide_task_t args;
- struct ide_taskfile *tf = &args.tf;
-
- memset(&args, 0, sizeof(ide_task_t));
- tf->feature = ATA_SMART_ENABLE;
- tf->lbam = ATA_SMART_LBAM_PASS;
- tf->lbah = ATA_SMART_LBAH_PASS;
- tf->command = ATA_CMD_SMART;
- args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
- return ide_no_data_taskfile(drive, &args);
-}
-
-static int get_smart_data(ide_drive_t *drive, u8 *buf, u8 sub_cmd)
-{
- ide_task_t args;
- struct ide_taskfile *tf = &args.tf;
-
- memset(&args, 0, sizeof(ide_task_t));
- tf->feature = sub_cmd;
- tf->nsect = 0x01;
- tf->lbam = ATA_SMART_LBAM_PASS;
- tf->lbah = ATA_SMART_LBAH_PASS;
- tf->command = ATA_CMD_SMART;
- args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
- args.data_phase = TASKFILE_IN;
- (void) smart_enable(drive);
- return ide_raw_taskfile(drive, &args, buf, 1);
-}
-
-static int proc_idedisk_read_cache
- (char *page, char **start, off_t off, int count, int *eof, void *data)
-{
- ide_drive_t *drive = (ide_drive_t *) data;
- char *out = page;
- int len;
-
- if (drive->id_read)
- len = sprintf(out, "%i\n", drive->id[ATA_ID_BUF_SIZE] / 2);
- else
- len = sprintf(out, "(none)\n");
-
- PROC_IDE_READ_RETURN(page, start, off, count, eof, len);
-}
-
-static int proc_idedisk_read_capacity
- (char *page, char **start, off_t off, int count, int *eof, void *data)
-{
- ide_drive_t*drive = (ide_drive_t *)data;
- int len;
-
- len = sprintf(page, "%llu\n", (long long)idedisk_capacity(drive));
-
- PROC_IDE_READ_RETURN(page, start, off, count, eof, len);
-}
-
-static int proc_idedisk_read_smart(char *page, char **start, off_t off,
- int count, int *eof, void *data, u8 sub_cmd)
-{
- ide_drive_t *drive = (ide_drive_t *)data;
- int len = 0, i = 0;
-
- if (get_smart_data(drive, page, sub_cmd) == 0) {
- unsigned short *val = (unsigned short *) page;
- char *out = (char *)val + SECTOR_SIZE;
-
- page = out;
- do {
- out += sprintf(out, "%04x%c", le16_to_cpu(*val),
- (++i & 7) ? ' ' : '\n');
- val += 1;
- } while (i < SECTOR_SIZE / 2);
- len = out - page;
+ /*
+ * If this device supports the Host Protected Area feature set,
+ * then we may need to change our opinion about its capacity.
+ */
+ if (ata_id_hpa_enabled(id))
+ idedisk_check_hpa(drive);
}
-
- PROC_IDE_READ_RETURN(page, start, off, count, eof, len);
}

-static int proc_idedisk_read_sv
- (char *page, char **start, off_t off, int count, int *eof, void *data)
+sector_t ide_disk_capacity(ide_drive_t *drive)
{
- return proc_idedisk_read_smart(page, start, off, count, eof, data,
- ATA_SMART_READ_VALUES);
-}
-
-static int proc_idedisk_read_st
- (char *page, char **start, off_t off, int count, int *eof, void *data)
-{
- return proc_idedisk_read_smart(page, start, off, count, eof, data,
- ATA_SMART_READ_THRESHOLDS);
+ return drive->capacity64;
}

-static ide_proc_entry_t idedisk_proc[] = {
- { "cache", S_IFREG|S_IRUGO, proc_idedisk_read_cache, NULL },
- { "capacity", S_IFREG|S_IRUGO, proc_idedisk_read_capacity, NULL },
- { "geometry", S_IFREG|S_IRUGO, proc_ide_read_geometry, NULL },
- { "smart_values", S_IFREG|S_IRUSR, proc_idedisk_read_sv, NULL },
- { "smart_thresholds", S_IFREG|S_IRUSR, proc_idedisk_read_st, NULL },
- { NULL, 0, NULL, NULL }
-};
-#endif /* CONFIG_IDE_PROC_FS */
-
static void idedisk_prepare_flush(struct request_queue *q, struct request *rq)
{
ide_drive_t *drive = q->queuedata;
@@ -568,25 +461,43 @@ static int set_multcount(ide_drive_t *drive, int arg)
return (drive->mult_count == arg) ? 0 : -EIO;
}

-ide_devset_get(nowerr, nowerr);
+ide_devset_get_flag(nowerr, IDE_DFLAG_NOWERR);

static int set_nowerr(ide_drive_t *drive, int arg)
{
if (arg < 0 || arg > 1)
return -EINVAL;

- drive->nowerr = arg;
+ if (arg)
+ drive->dev_flags |= IDE_DFLAG_NOWERR;
+ else
+ drive->dev_flags &= ~IDE_DFLAG_NOWERR;
+
drive->bad_wstat = arg ? BAD_R_STAT : BAD_W_STAT;
+
return 0;
}

+static int ide_do_setfeature(ide_drive_t *drive, u8 feature, u8 nsect)
+{
+ ide_task_t task;
+
+ memset(&task, 0, sizeof(task));
+ task.tf.feature = feature;
+ task.tf.nsect = nsect;
+ task.tf.command = ATA_CMD_SET_FEATURES;
+ task.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
+
+ return ide_no_data_taskfile(drive, &task);
+}
+
static void update_ordered(ide_drive_t *drive)
{
u16 *id = drive->id;
unsigned ordered = QUEUE_ORDERED_NONE;
prepare_flush_fn *prep_fn = NULL;

- if (drive->wcache) {
+ if (drive->dev_flags & IDE_DFLAG_WCACHE) {
unsigned long long capacity;
int barrier;
/*
@@ -597,9 +508,11 @@ static void update_ordered(ide_drive_t *drive)
* time we have trimmed the drive capacity if LBA48 is
* not available so we don't need to recheck that.
*/
- capacity = idedisk_capacity(drive);
- barrier = ata_id_flush_enabled(id) && !drive->noflush &&
- (drive->addressing == 0 || capacity <= (1ULL << 28) ||
+ capacity = ide_disk_capacity(drive);
+ barrier = ata_id_flush_enabled(id) &&
+ (drive->dev_flags & IDE_DFLAG_NOFLUSH) == 0 &&
+ ((drive->dev_flags & IDE_DFLAG_LBA48) == 0 ||
+ capacity <= (1ULL << 28) ||
ata_id_flush_ext_enabled(id));

printk(KERN_INFO "%s: cache flushes %ssupported\n",
@@ -615,25 +528,24 @@ static void update_ordered(ide_drive_t *drive)
blk_queue_ordered(drive->queue, ordered, prep_fn);
}

-ide_devset_get(wcache, wcache);
+ide_devset_get_flag(wcache, IDE_DFLAG_WCACHE);

static int set_wcache(ide_drive_t *drive, int arg)
{
- ide_task_t args;
int err = 1;

if (arg < 0 || arg > 1)
return -EINVAL;

if (ata_id_flush_enabled(drive->id)) {
- memset(&args, 0, sizeof(ide_task_t));
- args.tf.feature = arg ?
- SETFEATURES_WC_ON : SETFEATURES_WC_OFF;
- args.tf.command = ATA_CMD_SET_FEATURES;
- args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
- err = ide_no_data_taskfile(drive, &args);
- if (err == 0)
- drive->wcache = arg;
+ err = ide_do_setfeature(drive,
+ arg ? SETFEATURES_WC_ON : SETFEATURES_WC_OFF, 0);
+ if (err == 0) {
+ if (arg)
+ drive->dev_flags |= IDE_DFLAG_WCACHE;
+ else
+ drive->dev_flags &= ~IDE_DFLAG_WCACHE;
+ }
}

update_ordered(drive);
@@ -658,22 +570,18 @@ ide_devset_get(acoustic, acoustic);

static int set_acoustic(ide_drive_t *drive, int arg)
{
- ide_task_t args;
-
if (arg < 0 || arg > 254)
return -EINVAL;

- memset(&args, 0, sizeof(ide_task_t));
- args.tf.feature = arg ? SETFEATURES_AAM_ON : SETFEATURES_AAM_OFF;
- args.tf.nsect = arg;
- args.tf.command = ATA_CMD_SET_FEATURES;
- args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
- ide_no_data_taskfile(drive, &args);
+ ide_do_setfeature(drive,
+ arg ? SETFEATURES_AAM_ON : SETFEATURES_AAM_OFF, arg);
+
drive->acoustic = arg;
+
return 0;
}

-ide_devset_get(addressing, addressing);
+ide_devset_get_flag(addressing, IDE_DFLAG_LBA48);

/*
* drive->addressing:
@@ -686,49 +594,27 @@ static int set_addressing(ide_drive_t *drive, int arg)
if (arg < 0 || arg > 2)
return -EINVAL;

- drive->addressing = 0;
-
- if (drive->hwif->host_flags & IDE_HFLAG_NO_LBA48)
- return 0;
-
- if (ata_id_lba48_enabled(drive->id) == 0)
+ if (arg && ((drive->hwif->host_flags & IDE_HFLAG_NO_LBA48) ||
+ ata_id_lba48_enabled(drive->id) == 0))
return -EIO;

- drive->addressing = arg;
+ if (arg == 2)
+ arg = 0;
+
+ if (arg)
+ drive->dev_flags |= IDE_DFLAG_LBA48;
+ else
+ drive->dev_flags &= ~IDE_DFLAG_LBA48;

return 0;
}

-ide_devset_rw(acoustic, acoustic);
-ide_devset_rw(address, addressing);
-ide_devset_rw(multcount, multcount);
-ide_devset_rw(wcache, wcache);
-
-ide_devset_rw_sync(nowerr, nowerr);
+ide_ext_devset_rw(acoustic, acoustic);
+ide_ext_devset_rw(address, addressing);
+ide_ext_devset_rw(multcount, multcount);
+ide_ext_devset_rw(wcache, wcache);

-#ifdef CONFIG_IDE_PROC_FS
-ide_devset_rw_field(bios_cyl, bios_cyl);
-ide_devset_rw_field(bios_head, bios_head);
-ide_devset_rw_field(bios_sect, bios_sect);
-ide_devset_rw_field(failures, failures);
-ide_devset_rw_field(lun, lun);
-ide_devset_rw_field(max_failures, max_failures);
-
-static const struct ide_proc_devset idedisk_settings[] = {
- IDE_PROC_DEVSET(acoustic, 0, 254),
- IDE_PROC_DEVSET(address, 0, 2),
- IDE_PROC_DEVSET(bios_cyl, 0, 65535),
- IDE_PROC_DEVSET(bios_head, 0, 255),
- IDE_PROC_DEVSET(bios_sect, 0, 63),
- IDE_PROC_DEVSET(failures, 0, 65535),
- IDE_PROC_DEVSET(lun, 0, 7),
- IDE_PROC_DEVSET(max_failures, 0, 65535),
- IDE_PROC_DEVSET(multcount, 0, 16),
- IDE_PROC_DEVSET(nowerr, 0, 1),
- IDE_PROC_DEVSET(wcache, 0, 1),
- { 0 },
-};
-#endif
+ide_ext_devset_rw_sync(nowerr, nowerr);

static void idedisk_setup(ide_drive_t *drive)
{
@@ -740,20 +626,20 @@ static void idedisk_setup(ide_drive_t *drive)

ide_proc_register_driver(drive, idkp->driver);

- if (drive->id_read == 0)
+ if ((drive->dev_flags & IDE_DFLAG_ID_READ) == 0)
return;

- if (drive->removable) {
+ if (drive->dev_flags & IDE_DFLAG_REMOVABLE) {
/*
* Removable disks (eg. SYQUEST); ignore 'WD' drives
*/
if (m[0] != 'W' || m[1] != 'D')
- drive->doorlocking = 1;
+ drive->dev_flags |= IDE_DFLAG_DOORLOCKING;
}

(void)set_addressing(drive, 1);

- if (drive->addressing == 1) {
+ if (drive->dev_flags & IDE_DFLAG_LBA48) {
int max_s = 2048;

if (max_s > hwif->rqsize)
@@ -769,7 +655,8 @@ static void idedisk_setup(ide_drive_t *drive)
init_idedisk_capacity(drive);

/* limit drive capacity to 137GB if LBA48 cannot be used */
- if (drive->addressing == 0 && drive->capacity64 > 1ULL << 28) {
+ if ((drive->dev_flags & IDE_DFLAG_LBA48) == 0 &&
+ drive->capacity64 > 1ULL << 28) {
printk(KERN_WARNING "%s: cannot use LBA48 - full capacity "
"%llu sectors (%llu MB)\n",
drive->name, (unsigned long long)drive->capacity64,
@@ -777,22 +664,23 @@ static void idedisk_setup(ide_drive_t *drive)
drive->capacity64 = 1ULL << 28;
}

- if ((hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA) && drive->addressing) {
+ if ((hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA) &&
+ (drive->dev_flags & IDE_DFLAG_LBA48)) {
if (drive->capacity64 > 1ULL << 28) {
printk(KERN_INFO "%s: cannot use LBA48 DMA - PIO mode"
" will be used for accessing sectors "
"> %u\n", drive->name, 1 << 28);
} else
- drive->addressing = 0;
+ drive->dev_flags &= ~IDE_DFLAG_LBA48;
}

/*
* if possible, give fdisk access to more of the drive,
* by correcting bios_cyls:
*/
- capacity = idedisk_capacity(drive);
+ capacity = ide_disk_capacity(drive);

- if (!drive->forced_geom) {
+ if ((drive->dev_flags & IDE_DFLAG_FORCED_GEOM) == 0) {
if (ata_id_lba48_enabled(drive->id)) {
/* compatibility */
drive->bios_sect = 63;
@@ -827,14 +715,15 @@ static void idedisk_setup(ide_drive_t *drive)

/* write cache enabled? */
if ((id[ATA_ID_CSFO] & 1) || ata_id_wcache_enabled(id))
- drive->wcache = 1;
+ drive->dev_flags |= IDE_DFLAG_WCACHE;

set_wcache(drive, 1);
}

static void ide_cacheflush_p(ide_drive_t *drive)
{
- if (!drive->wcache || ata_id_flush_enabled(drive->id) == 0)
+ if (ata_id_flush_enabled(drive->id) == 0 ||
+ (drive->dev_flags & IDE_DFLAG_WCACHE) == 0)
return;

if (do_idedisk_flushcache(drive))
@@ -918,13 +807,12 @@ static ide_driver_t idedisk_driver = {
.resume = ide_disk_resume,
.shutdown = ide_device_shutdown,
.version = IDEDISK_VERSION,
- .media = ide_disk,
.do_request = ide_do_rw_disk,
.end_request = ide_end_request,
.error = __ide_error,
#ifdef CONFIG_IDE_PROC_FS
- .proc = idedisk_proc,
- .settings = idedisk_settings,
+ .proc = ide_disk_proc,
+ .settings = ide_disk_settings,
#endif
};

@@ -953,15 +841,16 @@ static int idedisk_open(struct inode *inode, struct file *filp)

idkp->openers++;

- if (drive->removable && idkp->openers == 1) {
+ if ((drive->dev_flags & IDE_DFLAG_REMOVABLE) && idkp->openers == 1) {
check_disk_change(inode->i_bdev);
/*
* Ignore the return code from door_lock,
* since the open() has already succeeded,
* and the door_lock is irrelevant at this point.
*/
- if (drive->doorlocking && idedisk_set_doorlock(drive, 1))
- drive->doorlocking = 0;
+ if ((drive->dev_flags & IDE_DFLAG_DOORLOCKING) &&
+ idedisk_set_doorlock(drive, 1))
+ drive->dev_flags &= ~IDE_DFLAG_DOORLOCKING;
}
return 0;
}
@@ -975,9 +864,10 @@ static int idedisk_release(struct inode *inode, struct file *filp)
if (idkp->openers == 1)
ide_cacheflush_p(drive);

- if (drive->removable && idkp->openers == 1) {
- if (drive->doorlocking && idedisk_set_doorlock(drive, 0))
- drive->doorlocking = 0;
+ if ((drive->dev_flags & IDE_DFLAG_REMOVABLE) && idkp->openers == 1) {
+ if ((drive->dev_flags & IDE_DFLAG_DOORLOCKING) &&
+ idedisk_set_doorlock(drive, 0))
+ drive->dev_flags &= ~IDE_DFLAG_DOORLOCKING;
}

idkp->openers--;
@@ -998,48 +888,25 @@ static int idedisk_getgeo(struct block_device *bdev, struct hd_geometry *geo)
return 0;
}

-static const struct ide_ioctl_devset ide_disk_ioctl_settings[] = {
-{ HDIO_GET_ADDRESS, HDIO_SET_ADDRESS, &ide_devset_address },
-{ HDIO_GET_MULTCOUNT, HDIO_SET_MULTCOUNT, &ide_devset_multcount },
-{ HDIO_GET_NOWERR, HDIO_SET_NOWERR, &ide_devset_nowerr },
-{ HDIO_GET_WCACHE, HDIO_SET_WCACHE, &ide_devset_wcache },
-{ HDIO_GET_ACOUSTIC, HDIO_SET_ACOUSTIC, &ide_devset_acoustic },
-{ 0 }
-};
-
-static int idedisk_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- struct block_device *bdev = inode->i_bdev;
- struct ide_disk_obj *idkp = ide_disk_g(bdev->bd_disk);
- ide_drive_t *drive = idkp->drive;
- int err;
-
- err = ide_setting_ioctl(drive, bdev, cmd, arg, ide_disk_ioctl_settings);
- if (err != -EOPNOTSUPP)
- return err;
-
- return generic_ide_ioctl(drive, file, bdev, cmd, arg);
-}
-
static int idedisk_media_changed(struct gendisk *disk)
{
struct ide_disk_obj *idkp = ide_disk_g(disk);
ide_drive_t *drive = idkp->drive;

/* do not scan partitions twice if this is a removable device */
- if (drive->attach) {
- drive->attach = 0;
+ if (drive->dev_flags & IDE_DFLAG_ATTACH) {
+ drive->dev_flags &= ~IDE_DFLAG_ATTACH;
return 0;
}
+
/* if removable, always assume it was changed */
- return drive->removable;
+ return !!(drive->dev_flags & IDE_DFLAG_REMOVABLE);
}

static int idedisk_revalidate_disk(struct gendisk *disk)
{
struct ide_disk_obj *idkp = ide_disk_g(disk);
- set_capacity(disk, idedisk_capacity(idkp->drive));
+ set_capacity(disk, ide_disk_capacity(idkp->drive));
return 0;
}

@@ -1047,7 +914,7 @@ static struct block_device_operations idedisk_ops = {
.owner = THIS_MODULE,
.open = idedisk_open,
.release = idedisk_release,
- .ioctl = idedisk_ioctl,
+ .ioctl = ide_disk_ioctl,
.getgeo = idedisk_getgeo,
.media_changed = idedisk_media_changed,
.revalidate_disk = idedisk_revalidate_disk
@@ -1088,19 +955,20 @@ static int ide_disk_probe(ide_drive_t *drive)
drive->driver_data = idkp;

idedisk_setup(drive);
- if ((!drive->head || drive->head > 16) && !drive->select.b.lba) {
+ if ((drive->dev_flags & IDE_DFLAG_LBA) == 0 &&
+ (drive->head == 0 || drive->head > 16)) {
printk(KERN_ERR "%s: INVALID GEOMETRY: %d PHYSICAL HEADS?\n",
drive->name, drive->head);
- drive->attach = 0;
+ drive->dev_flags &= ~IDE_DFLAG_ATTACH;
} else
- drive->attach = 1;
+ drive->dev_flags |= IDE_DFLAG_ATTACH;

g->minors = IDE_DISK_MINORS;
g->driverfs_dev = &drive->gendev;
g->flags |= GENHD_FL_EXT_DEVT;
- if (drive->removable)
- g->flags |= GENHD_FL_REMOVABLE;
- set_capacity(g, idedisk_capacity(drive));
+ if (drive->dev_flags & IDE_DFLAG_REMOVABLE)
+ g->flags = GENHD_FL_REMOVABLE;
+ set_capacity(g, ide_disk_capacity(drive));
g->fops = &idedisk_ops;
add_disk(g);
return 0;
@@ -1122,6 +990,7 @@ static int __init idedisk_init(void)
}

MODULE_ALIAS("ide:*m-disk*");
+MODULE_ALIAS("ide-disk");
module_init(idedisk_init);
module_exit(idedisk_exit);
MODULE_LICENSE("GPL");
diff --git a/drivers/ide/ide-disk.h b/drivers/ide/ide-disk.h
new file mode 100644
index 0000000..a82fa43
--- /dev/null
+++ b/drivers/ide/ide-disk.h
@@ -0,0 +1,32 @@
+#ifndef __IDE_DISK_H
+#define __IDE_DISK_H
+
+struct ide_disk_obj {
+ ide_drive_t *drive;
+ ide_driver_t *driver;
+ struct gendisk *disk;
+ struct kref kref;
+ unsigned int openers; /* protected by BKL for now */
+};
+
+#define ide_disk_g(disk) \
+ container_of((disk)->private_data, struct ide_disk_obj, driver)
+
+/* ide-disk.c */
+sector_t ide_disk_capacity(ide_drive_t *);
+ide_decl_devset(address);
+ide_decl_devset(multcount);
+ide_decl_devset(nowerr);
+ide_decl_devset(wcache);
+ide_decl_devset(acoustic);
+
+/* ide-disk_ioctl.c */
+int ide_disk_ioctl(struct inode *, struct file *, unsigned int, unsigned long);
+
+#ifdef CONFIG_IDE_PROC_FS
+/* ide-disk_proc.c */
+extern ide_proc_entry_t ide_disk_proc[];
+extern const struct ide_proc_devset ide_disk_settings[];
+#endif
+
+#endif /* __IDE_DISK_H */
diff --git a/drivers/ide/ide-disk_ioctl.c b/drivers/ide/ide-disk_ioctl.c
new file mode 100644
index 0000000..a6cf1a0
--- /dev/null
+++ b/drivers/ide/ide-disk_ioctl.c
@@ -0,0 +1,29 @@
+#include <linux/kernel.h>
+#include <linux/ide.h>
+#include <linux/hdreg.h>
+
+#include "ide-disk.h"
+
+static const struct ide_ioctl_devset ide_disk_ioctl_settings[] = {
+{ HDIO_GET_ADDRESS, HDIO_SET_ADDRESS, &ide_devset_address },
+{ HDIO_GET_MULTCOUNT, HDIO_SET_MULTCOUNT, &ide_devset_multcount },
+{ HDIO_GET_NOWERR, HDIO_SET_NOWERR, &ide_devset_nowerr },
+{ HDIO_GET_WCACHE, HDIO_SET_WCACHE, &ide_devset_wcache },
+{ HDIO_GET_ACOUSTIC, HDIO_SET_ACOUSTIC, &ide_devset_acoustic },
+{ 0 }
+};
+
+int ide_disk_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ struct block_device *bdev = inode->i_bdev;
+ struct ide_disk_obj *idkp = ide_disk_g(bdev->bd_disk);
+ ide_drive_t *drive = idkp->drive;
+ int err;
+
+ err = ide_setting_ioctl(drive, bdev, cmd, arg, ide_disk_ioctl_settings);
+ if (err != -EOPNOTSUPP)
+ return err;
+
+ return generic_ide_ioctl(drive, file, bdev, cmd, arg);
+}
diff --git a/drivers/ide/ide-disk_proc.c b/drivers/ide/ide-disk_proc.c
new file mode 100644
index 0000000..4724976
--- /dev/null
+++ b/drivers/ide/ide-disk_proc.c
@@ -0,0 +1,129 @@
+#include <linux/kernel.h>
+#include <linux/ide.h>
+#include <linux/hdreg.h>
+
+#include "ide-disk.h"
+
+static int smart_enable(ide_drive_t *drive)
+{
+ ide_task_t args;
+ struct ide_taskfile *tf = &args.tf;
+
+ memset(&args, 0, sizeof(ide_task_t));
+ tf->feature = ATA_SMART_ENABLE;
+ tf->lbam = ATA_SMART_LBAM_PASS;
+ tf->lbah = ATA_SMART_LBAH_PASS;
+ tf->command = ATA_CMD_SMART;
+ args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
+ return ide_no_data_taskfile(drive, &args);
+}
+
+static int get_smart_data(ide_drive_t *drive, u8 *buf, u8 sub_cmd)
+{
+ ide_task_t args;
+ struct ide_taskfile *tf = &args.tf;
+
+ memset(&args, 0, sizeof(ide_task_t));
+ tf->feature = sub_cmd;
+ tf->nsect = 0x01;
+ tf->lbam = ATA_SMART_LBAM_PASS;
+ tf->lbah = ATA_SMART_LBAH_PASS;
+ tf->command = ATA_CMD_SMART;
+ args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
+ args.data_phase = TASKFILE_IN;
+ (void) smart_enable(drive);
+ return ide_raw_taskfile(drive, &args, buf, 1);
+}
+
+static int proc_idedisk_read_cache
+ (char *page, char **start, off_t off, int count, int *eof, void *data)
+{
+ ide_drive_t *drive = (ide_drive_t *) data;
+ char *out = page;
+ int len;
+
+ if (drive->dev_flags & IDE_DFLAG_ID_READ)
+ len = sprintf(out, "%i\n", drive->id[ATA_ID_BUF_SIZE] / 2);
+ else
+ len = sprintf(out, "(none)\n");
+
+ PROC_IDE_READ_RETURN(page, start, off, count, eof, len);
+}
+
+static int proc_idedisk_read_capacity
+ (char *page, char **start, off_t off, int count, int *eof, void *data)
+{
+ ide_drive_t*drive = (ide_drive_t *)data;
+ int len;
+
+ len = sprintf(page, "%llu\n", (long long)ide_disk_capacity(drive));
+
+ PROC_IDE_READ_RETURN(page, start, off, count, eof, len);
+}
+
+static int proc_idedisk_read_smart(char *page, char **start, off_t off,
+ int count, int *eof, void *data, u8 sub_cmd)
+{
+ ide_drive_t *drive = (ide_drive_t *)data;
+ int len = 0, i = 0;
+
+ if (get_smart_data(drive, page, sub_cmd) == 0) {
+ unsigned short *val = (unsigned short *) page;
+ char *out = (char *)val + SECTOR_SIZE;
+
+ page = out;
+ do {
+ out += sprintf(out, "%04x%c", le16_to_cpu(*val),
+ (++i & 7) ? ' ' : '\n');
+ val += 1;
+ } while (i < SECTOR_SIZE / 2);
+ len = out - page;
+ }
+
+ PROC_IDE_READ_RETURN(page, start, off, count, eof, len);
+}
+
+static int proc_idedisk_read_sv
+ (char *page, char **start, off_t off, int count, int *eof, void *data)
+{
+ return proc_idedisk_read_smart(page, start, off, count, eof, data,
+ ATA_SMART_READ_VALUES);
+}
+
+static int proc_idedisk_read_st
+ (char *page, char **start, off_t off, int count, int *eof, void *data)
+{
+ return proc_idedisk_read_smart(page, start, off, count, eof, data,
+ ATA_SMART_READ_THRESHOLDS);
+}
+
+ide_proc_entry_t ide_disk_proc[] = {
+ { "cache", S_IFREG|S_IRUGO, proc_idedisk_read_cache, NULL },
+ { "capacity", S_IFREG|S_IRUGO, proc_idedisk_read_capacity, NULL },
+ { "geometry", S_IFREG|S_IRUGO, proc_ide_read_geometry, NULL },
+ { "smart_values", S_IFREG|S_IRUSR, proc_idedisk_read_sv, NULL },
+ { "smart_thresholds", S_IFREG|S_IRUSR, proc_idedisk_read_st, NULL },
+ { NULL, 0, NULL, NULL }
+};
+
+ide_devset_rw_field(bios_cyl, bios_cyl);
+ide_devset_rw_field(bios_head, bios_head);
+ide_devset_rw_field(bios_sect, bios_sect);
+ide_devset_rw_field(failures, failures);
+ide_devset_rw_field(lun, lun);
+ide_devset_rw_field(max_failures, max_failures);
+
+const struct ide_proc_devset ide_disk_settings[] = {
+ IDE_PROC_DEVSET(acoustic, 0, 254),
+ IDE_PROC_DEVSET(address, 0, 2),
+ IDE_PROC_DEVSET(bios_cyl, 0, 65535),
+ IDE_PROC_DEVSET(bios_head, 0, 255),
+ IDE_PROC_DEVSET(bios_sect, 0, 63),
+ IDE_PROC_DEVSET(failures, 0, 65535),
+ IDE_PROC_DEVSET(lun, 0, 7),
+ IDE_PROC_DEVSET(max_failures, 0, 65535),
+ IDE_PROC_DEVSET(multcount, 0, 16),
+ IDE_PROC_DEVSET(nowerr, 0, 1),
+ IDE_PROC_DEVSET(wcache, 0, 1),
+ { 0 },
+};
diff --git a/drivers/ide/ide-dma-sff.c b/drivers/ide/ide-dma-sff.c
new file mode 100644
index 0000000..0903782
--- /dev/null
+++ b/drivers/ide/ide-dma-sff.c
@@ -0,0 +1,356 @@
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/ide.h>
+#include <linux/scatterlist.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+
+/**
+ * config_drive_for_dma - attempt to activate IDE DMA
+ * @drive: the drive to place in DMA mode
+ *
+ * If the drive supports at least mode 2 DMA or UDMA of any kind
+ * then attempt to place it into DMA mode. Drives that are known to
+ * support DMA but predate the DMA properties or that are known
+ * to have DMA handling bugs are also set up appropriately based
+ * on the good/bad drive lists.
+ */
+
+int config_drive_for_dma(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ u16 *id = drive->id;
+
+ if (drive->media != ide_disk) {
+ if (hwif->host_flags & IDE_HFLAG_NO_ATAPI_DMA)
+ return 0;
+ }
+
+ /*
+ * Enable DMA on any drive that has
+ * UltraDMA (mode 0/1/2/3/4/5/6) enabled
+ */
+ if ((id[ATA_ID_FIELD_VALID] & 4) &&
+ ((id[ATA_ID_UDMA_MODES] >> 8) & 0x7f))
+ return 1;
+
+ /*
+ * Enable DMA on any drive that has mode2 DMA
+ * (multi or single) enabled
+ */
+ if (id[ATA_ID_FIELD_VALID] & 2) /* regular DMA */
+ if ((id[ATA_ID_MWDMA_MODES] & 0x404) == 0x404 ||
+ (id[ATA_ID_SWDMA_MODES] & 0x404) == 0x404)
+ return 1;
+
+ /* Consult the list of known "good" drives */
+ if (ide_dma_good_drive(drive))
+ return 1;
+
+ return 0;
+}
+
+/**
+ * ide_dma_host_set - Enable/disable DMA on a host
+ * @drive: drive to control
+ *
+ * Enable/disable DMA on an IDE controller following generic
+ * bus-mastering IDE controller behaviour.
+ */
+
+void ide_dma_host_set(ide_drive_t *drive, int on)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ u8 unit = drive->dn & 1;
+ u8 dma_stat = hwif->tp_ops->read_sff_dma_status(hwif);
+
+ if (on)
+ dma_stat |= (1 << (5 + unit));
+ else
+ dma_stat &= ~(1 << (5 + unit));
+
+ if (hwif->host_flags & IDE_HFLAG_MMIO)
+ writeb(dma_stat,
+ (void __iomem *)(hwif->dma_base + ATA_DMA_STATUS));
+ else
+ outb(dma_stat, hwif->dma_base + ATA_DMA_STATUS);
+}
+EXPORT_SYMBOL_GPL(ide_dma_host_set);
+
+/**
+ * ide_build_dmatable - build IDE DMA table
+ *
+ * ide_build_dmatable() prepares a dma request. We map the command
+ * to get the pci bus addresses of the buffers and then build up
+ * the PRD table that the IDE layer wants to be fed.
+ *
+ * Most chipsets correctly interpret a length of 0x0000 as 64KB,
+ * but at least one (e.g. CS5530) misinterprets it as zero (!).
+ * So we break the 64KB entry into two 32KB entries instead.
+ *
+ * Returns the number of built PRD entries if all went okay,
+ * returns 0 otherwise.
+ *
+ * May also be invoked from trm290.c
+ */
+
+int ide_build_dmatable(ide_drive_t *drive, struct request *rq)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ __le32 *table = (__le32 *)hwif->dmatable_cpu;
+ unsigned int is_trm290 = (hwif->chipset == ide_trm290) ? 1 : 0;
+ unsigned int count = 0;
+ int i;
+ struct scatterlist *sg;
+
+ hwif->sg_nents = ide_build_sglist(drive, rq);
+ if (hwif->sg_nents == 0)
+ return 0;
+
+ for_each_sg(hwif->sg_table, sg, hwif->sg_nents, i) {
+ u32 cur_addr, cur_len, xcount, bcount;
+
+ cur_addr = sg_dma_address(sg);
+ cur_len = sg_dma_len(sg);
+
+ /*
+ * Fill in the dma table, without crossing any 64kB boundaries.
+ * Most hardware requires 16-bit alignment of all blocks,
+ * but the trm290 requires 32-bit alignment.
+ */
+
+ while (cur_len) {
+ if (count++ >= PRD_ENTRIES)
+ goto use_pio_instead;
+
+ bcount = 0x10000 - (cur_addr & 0xffff);
+ if (bcount > cur_len)
+ bcount = cur_len;
+ *table++ = cpu_to_le32(cur_addr);
+ xcount = bcount & 0xffff;
+ if (is_trm290)
+ xcount = ((xcount >> 2) - 1) << 16;
+ if (xcount == 0x0000) {
+ if (count++ >= PRD_ENTRIES)
+ goto use_pio_instead;
+ *table++ = cpu_to_le32(0x8000);
+ *table++ = cpu_to_le32(cur_addr + 0x8000);
+ xcount = 0x8000;
+ }
+ *table++ = cpu_to_le32(xcount);
+ cur_addr += bcount;
+ cur_len -= bcount;
+ }
+ }
+
+ if (count) {
+ if (!is_trm290)
+ *--table |= cpu_to_le32(0x80000000);
+ return count;
+ }
+
+use_pio_instead:
+ printk(KERN_ERR "%s: %s\n", drive->name,
+ count ? "DMA table too small" : "empty DMA table?");
+
+ ide_destroy_dmatable(drive);
+
+ return 0; /* revert to PIO for this request */
+}
+EXPORT_SYMBOL_GPL(ide_build_dmatable);
+
+/**
+ * ide_dma_setup - begin a DMA phase
+ * @drive: target device
+ *
+ * Build an IDE DMA PRD (IDE speak for scatter gather table)
+ * and then set up the DMA transfer registers for a device
+ * that follows generic IDE PCI DMA behaviour. Controllers can
+ * override this function if they need to
+ *
+ * Returns 0 on success. If a PIO fallback is required then 1
+ * is returned.
+ */
+
+int ide_dma_setup(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ struct request *rq = hwif->hwgroup->rq;
+ unsigned int reading;
+ u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
+ u8 dma_stat;
+
+ if (rq_data_dir(rq))
+ reading = 0;
+ else
+ reading = 1 << 3;
+
+ /* fall back to pio! */
+ if (!ide_build_dmatable(drive, rq)) {
+ ide_map_sg(drive, rq);
+ return 1;
+ }
+
+ /* PRD table */
+ if (hwif->host_flags & IDE_HFLAG_MMIO)
+ writel(hwif->dmatable_dma,
+ (void __iomem *)(hwif->dma_base + ATA_DMA_TABLE_OFS));
+ else
+ outl(hwif->dmatable_dma, hwif->dma_base + ATA_DMA_TABLE_OFS);
+
+ /* specify r/w */
+ if (mmio)
+ writeb(reading, (void __iomem *)(hwif->dma_base + ATA_DMA_CMD));
+ else
+ outb(reading, hwif->dma_base + ATA_DMA_CMD);
+
+ /* read DMA status for INTR & ERROR flags */
+ dma_stat = hwif->tp_ops->read_sff_dma_status(hwif);
+
+ /* clear INTR & ERROR flags */
+ if (mmio)
+ writeb(dma_stat | 6,
+ (void __iomem *)(hwif->dma_base + ATA_DMA_STATUS));
+ else
+ outb(dma_stat | 6, hwif->dma_base + ATA_DMA_STATUS);
+
+ drive->waiting_for_dma = 1;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ide_dma_setup);
+
+/**
+ * dma_timer_expiry - handle a DMA timeout
+ * @drive: Drive that timed out
+ *
+ * An IDE DMA transfer timed out. In the event of an error we ask
+ * the driver to resolve the problem, if a DMA transfer is still
+ * in progress we continue to wait (arguably we need to add a
+ * secondary 'I don't care what the drive thinks' timeout here)
+ * Finally if we have an interrupt we let it complete the I/O.
+ * But only one time - we clear expiry and if it's still not
+ * completed after WAIT_CMD, we error and retry in PIO.
+ * This can occur if an interrupt is lost or due to hang or bugs.
+ */
+
+static int dma_timer_expiry(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ u8 dma_stat = hwif->tp_ops->read_sff_dma_status(hwif);
+
+ printk(KERN_WARNING "%s: %s: DMA status (0x%02x)\n",
+ drive->name, __func__, dma_stat);
+
+ if ((dma_stat & 0x18) == 0x18) /* BUSY Stupid Early Timer !! */
+ return WAIT_CMD;
+
+ hwif->hwgroup->expiry = NULL; /* one free ride for now */
+
+ /* 1 dmaing, 2 error, 4 intr */
+ if (dma_stat & 2) /* ERROR */
+ return -1;
+
+ if (dma_stat & 1) /* DMAing */
+ return WAIT_CMD;
+
+ if (dma_stat & 4) /* Got an Interrupt */
+ return WAIT_CMD;
+
+ return 0; /* Status is unknown -- reset the bus */
+}
+
+void ide_dma_exec_cmd(ide_drive_t *drive, u8 command)
+{
+ /* issue cmd to drive */
+ ide_execute_command(drive, command, &ide_dma_intr, 2 * WAIT_CMD,
+ dma_timer_expiry);
+}
+EXPORT_SYMBOL_GPL(ide_dma_exec_cmd);
+
+void ide_dma_start(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ u8 dma_cmd;
+
+ /* Note that this is done *after* the cmd has
+ * been issued to the drive, as per the BM-IDE spec.
+ * The Promise Ultra33 doesn't work correctly when
+ * we do this part before issuing the drive cmd.
+ */
+ if (hwif->host_flags & IDE_HFLAG_MMIO) {
+ dma_cmd = readb((void __iomem *)(hwif->dma_base + ATA_DMA_CMD));
+ /* start DMA */
+ writeb(dma_cmd | 1,
+ (void __iomem *)(hwif->dma_base + ATA_DMA_CMD));
+ } else {
+ dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
+ outb(dma_cmd | 1, hwif->dma_base + ATA_DMA_CMD);
+ }
+
+ wmb();
+}
+EXPORT_SYMBOL_GPL(ide_dma_start);
+
+/* returns 1 on error, 0 otherwise */
+int ide_dma_end(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
+ u8 dma_stat = 0, dma_cmd = 0;
+
+ drive->waiting_for_dma = 0;
+
+ if (mmio) {
+ /* get DMA command mode */
+ dma_cmd = readb((void __iomem *)(hwif->dma_base + ATA_DMA_CMD));
+ /* stop DMA */
+ writeb(dma_cmd & ~1,
+ (void __iomem *)(hwif->dma_base + ATA_DMA_CMD));
+ } else {
+ dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
+ outb(dma_cmd & ~1, hwif->dma_base + ATA_DMA_CMD);
+ }
+
+ /* get DMA status */
+ dma_stat = hwif->tp_ops->read_sff_dma_status(hwif);
+
+ if (mmio)
+ /* clear the INTR & ERROR bits */
+ writeb(dma_stat | 6,
+ (void __iomem *)(hwif->dma_base + ATA_DMA_STATUS));
+ else
+ outb(dma_stat | 6, hwif->dma_base + ATA_DMA_STATUS);
+
+ /* purge DMA mappings */
+ ide_destroy_dmatable(drive);
+ /* verify good DMA status */
+ wmb();
+ return (dma_stat & 7) != 4 ? (0x10 | dma_stat) : 0;
+}
+EXPORT_SYMBOL_GPL(ide_dma_end);
+
+/* returns 1 if dma irq issued, 0 otherwise */
+int ide_dma_test_irq(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ u8 dma_stat = hwif->tp_ops->read_sff_dma_status(hwif);
+
+ /* return 1 if INTR asserted */
+ if ((dma_stat & 4) == 4)
+ return 1;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ide_dma_test_irq);
+
+const struct ide_dma_ops sff_dma_ops = {
+ .dma_host_set = ide_dma_host_set,
+ .dma_setup = ide_dma_setup,
+ .dma_exec_cmd = ide_dma_exec_cmd,
+ .dma_start = ide_dma_start,
+ .dma_end = ide_dma_end,
+ .dma_test_irq = ide_dma_test_irq,
+ .dma_timeout = ide_dma_timeout,
+ .dma_lost_irq = ide_dma_lost_irq,
+};
+EXPORT_SYMBOL_GPL(sff_dma_ops);
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index ef2f150..fffd117 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -28,24 +28,13 @@
* for supplying a Promise UDMA board & WD UDMA drive for this work!
*/

-#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/ide.h>
-#include <linux/delay.h>
#include <linux/scatterlist.h>
#include <linux/dma-mapping.h>

-#include <asm/io.h>
-#include <asm/irq.h>
-
-static const struct drive_list_entry drive_whitelist [] = {
-
+static const struct drive_list_entry drive_whitelist[] = {
{ "Micropolis 2112A" , NULL },
{ "CONNER CTMA 4000" , NULL },
{ "CONNER CTT8000-A" , NULL },
@@ -53,8 +42,7 @@ static const struct drive_list_entry drive_whitelist [] = {
{ NULL , NULL }
};

-static const struct drive_list_entry drive_blacklist [] = {
-
+static const struct drive_list_entry drive_blacklist[] = {
{ "WDC AC11000H" , NULL },
{ "WDC AC22100H" , NULL },
{ "WDC AC32500H" , NULL },
@@ -94,11 +82,11 @@ static const struct drive_list_entry drive_blacklist [] = {
* ide_dma_intr - IDE DMA interrupt handler
* @drive: the drive the interrupt is for
*
- * Handle an interrupt completing a read/write DMA transfer on an
+ * Handle an interrupt completing a read/write DMA transfer on an
* IDE device
*/
-
-ide_startstop_t ide_dma_intr (ide_drive_t *drive)
+
+ide_startstop_t ide_dma_intr(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
u8 stat = 0, dma_stat = 0;
@@ -108,20 +96,19 @@ ide_startstop_t ide_dma_intr (ide_drive_t *drive)

if (OK_STAT(stat, DRIVE_READY, drive->bad_wstat | ATA_DRQ)) {
if (!dma_stat) {
- struct request *rq = HWGROUP(drive)->rq;
+ struct request *rq = hwif->hwgroup->rq;

task_end_request(drive, rq, stat);
return ide_stopped;
}
- printk(KERN_ERR "%s: dma_intr: bad DMA status (dma_stat=%x)\n",
- drive->name, dma_stat);
+ printk(KERN_ERR "%s: %s: bad DMA status (0x%02x)\n",
+ drive->name, __func__, dma_stat);
}
return ide_error(drive, "dma_intr", stat);
}
-
EXPORT_SYMBOL_GPL(ide_dma_intr);

-static int ide_dma_good_drive(ide_drive_t *drive)
+int ide_dma_good_drive(ide_drive_t *drive)
{
return ide_in_drive_list(drive->id, drive_whitelist);
}
@@ -139,7 +126,7 @@ static int ide_dma_good_drive(ide_drive_t *drive)

int ide_build_sglist(ide_drive_t *drive, struct request *rq)
{
- ide_hwif_t *hwif = HWIF(drive);
+ ide_hwif_t *hwif = drive->hwif;
struct scatterlist *sg = hwif->sg_table;

ide_map_sg(drive, rq);
@@ -152,106 +139,8 @@ int ide_build_sglist(ide_drive_t *drive, struct request *rq)
return dma_map_sg(hwif->dev, sg, hwif->sg_nents,
hwif->sg_dma_direction);
}
-
EXPORT_SYMBOL_GPL(ide_build_sglist);

-#ifdef CONFIG_BLK_DEV_IDEDMA_SFF
-/**
- * ide_build_dmatable - build IDE DMA table
- *
- * ide_build_dmatable() prepares a dma request. We map the command
- * to get the pci bus addresses of the buffers and then build up
- * the PRD table that the IDE layer wants to be fed. The code
- * knows about the 64K wrap bug in the CS5530.
- *
- * Returns the number of built PRD entries if all went okay,
- * returns 0 otherwise.
- *
- * May also be invoked from trm290.c
- */
-
-int ide_build_dmatable (ide_drive_t *drive, struct request *rq)
-{
- ide_hwif_t *hwif = HWIF(drive);
- __le32 *table = (__le32 *)hwif->dmatable_cpu;
- unsigned int is_trm290 = (hwif->chipset == ide_trm290) ? 1 : 0;
- unsigned int count = 0;
- int i;
- struct scatterlist *sg;
-
- hwif->sg_nents = i = ide_build_sglist(drive, rq);
-
- if (!i)
- return 0;
-
- sg = hwif->sg_table;
- while (i) {
- u32 cur_addr;
- u32 cur_len;
-
- cur_addr = sg_dma_address(sg);
- cur_len = sg_dma_len(sg);
-
- /*
- * Fill in the dma table, without crossing any 64kB boundaries.
- * Most hardware requires 16-bit alignment of all blocks,
- * but the trm290 requires 32-bit alignment.
- */
-
- while (cur_len) {
- if (count++ >= PRD_ENTRIES) {
- printk(KERN_ERR "%s: DMA table too small\n", drive->name);
- goto use_pio_instead;
- } else {
- u32 xcount, bcount = 0x10000 - (cur_addr & 0xffff);
-
- if (bcount > cur_len)
- bcount = cur_len;
- *table++ = cpu_to_le32(cur_addr);
- xcount = bcount & 0xffff;
- if (is_trm290)
- xcount = ((xcount >> 2) - 1) << 16;
- else if (xcount == 0x0000) {
- /*
- * Most chipsets correctly interpret a length of 0x0000 as 64KB,
- * but at least one (e.g. CS5530) misinterprets it as zero (!).
- * So here we break the 64KB entry into two 32KB entries instead.
- */
- if (count++ >= PRD_ENTRIES) {
- printk(KERN_ERR "%s: DMA table too small\n", drive->name);
- goto use_pio_instead;
- }
- *table++ = cpu_to_le32(0x8000);
- *table++ = cpu_to_le32(cur_addr + 0x8000);
- xcount = 0x8000;
- }
- *table++ = cpu_to_le32(xcount);
- cur_addr += bcount;
- cur_len -= bcount;
- }
- }
-
- sg = sg_next(sg);
- i--;
- }
-
- if (count) {
- if (!is_trm290)
- *--table |= cpu_to_le32(0x80000000);
- return count;
- }
-
- printk(KERN_ERR "%s: empty DMA table?\n", drive->name);
-
-use_pio_instead:
- ide_destroy_dmatable(drive);
-
- return 0; /* revert to PIO for this request */
-}
-
-EXPORT_SYMBOL_GPL(ide_build_dmatable);
-#endif
-
/**
* ide_destroy_dmatable - clean up DMA mapping
* @drive: The drive to unmap
@@ -262,147 +151,30 @@ EXPORT_SYMBOL_GPL(ide_build_dmatable);
* an oops as only one mapping can be live for each target at a given
* time.
*/
-
-void ide_destroy_dmatable (ide_drive_t *drive)
+
+void ide_destroy_dmatable(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;

dma_unmap_sg(hwif->dev, hwif->sg_table, hwif->sg_nents,
hwif->sg_dma_direction);
}
-
EXPORT_SYMBOL_GPL(ide_destroy_dmatable);

-#ifdef CONFIG_BLK_DEV_IDEDMA_SFF
-/**
- * config_drive_for_dma - attempt to activate IDE DMA
- * @drive: the drive to place in DMA mode
- *
- * If the drive supports at least mode 2 DMA or UDMA of any kind
- * then attempt to place it into DMA mode. Drives that are known to
- * support DMA but predate the DMA properties or that are known
- * to have DMA handling bugs are also set up appropriately based
- * on the good/bad drive lists.
- */
-
-static int config_drive_for_dma (ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- u16 *id = drive->id;
-
- if (drive->media != ide_disk) {
- if (hwif->host_flags & IDE_HFLAG_NO_ATAPI_DMA)
- return 0;
- }
-
- /*
- * Enable DMA on any drive that has
- * UltraDMA (mode 0/1/2/3/4/5/6) enabled
- */
- if ((id[ATA_ID_FIELD_VALID] & 4) &&
- ((id[ATA_ID_UDMA_MODES] >> 8) & 0x7f))
- return 1;
-
- /*
- * Enable DMA on any drive that has mode2 DMA
- * (multi or single) enabled
- */
- if (id[ATA_ID_FIELD_VALID] & 2) /* regular DMA */
- if ((id[ATA_ID_MWDMA_MODES] & 0x404) == 0x404 ||
- (id[ATA_ID_SWDMA_MODES] & 0x404) == 0x404)
- return 1;
-
- /* Consult the list of known "good" drives */
- if (ide_dma_good_drive(drive))
- return 1;
-
- return 0;
-}
-
-/**
- * dma_timer_expiry - handle a DMA timeout
- * @drive: Drive that timed out
- *
- * An IDE DMA transfer timed out. In the event of an error we ask
- * the driver to resolve the problem, if a DMA transfer is still
- * in progress we continue to wait (arguably we need to add a
- * secondary 'I don't care what the drive thinks' timeout here)
- * Finally if we have an interrupt we let it complete the I/O.
- * But only one time - we clear expiry and if it's still not
- * completed after WAIT_CMD, we error and retry in PIO.
- * This can occur if an interrupt is lost or due to hang or bugs.
- */
-
-static int dma_timer_expiry (ide_drive_t *drive)
-{
- ide_hwif_t *hwif = HWIF(drive);
- u8 dma_stat = hwif->tp_ops->read_sff_dma_status(hwif);
-
- printk(KERN_WARNING "%s: dma_timer_expiry: dma status == 0x%02x\n",
- drive->name, dma_stat);
-
- if ((dma_stat & 0x18) == 0x18) /* BUSY Stupid Early Timer !! */
- return WAIT_CMD;
-
- HWGROUP(drive)->expiry = NULL; /* one free ride for now */
-
- /* 1 dmaing, 2 error, 4 intr */
- if (dma_stat & 2) /* ERROR */
- return -1;
-
- if (dma_stat & 1) /* DMAing */
- return WAIT_CMD;
-
- if (dma_stat & 4) /* Got an Interrupt */
- return WAIT_CMD;
-
- return 0; /* Status is unknown -- reset the bus */
-}
-
-/**
- * ide_dma_host_set - Enable/disable DMA on a host
- * @drive: drive to control
- *
- * Enable/disable DMA on an IDE controller following generic
- * bus-mastering IDE controller behaviour.
- */
-
-void ide_dma_host_set(ide_drive_t *drive, int on)
-{
- ide_hwif_t *hwif = HWIF(drive);
- u8 unit = (drive->select.b.unit & 0x01);
- u8 dma_stat = hwif->tp_ops->read_sff_dma_status(hwif);
-
- if (on)
- dma_stat |= (1 << (5 + unit));
- else
- dma_stat &= ~(1 << (5 + unit));
-
- if (hwif->host_flags & IDE_HFLAG_MMIO)
- writeb(dma_stat,
- (void __iomem *)(hwif->dma_base + ATA_DMA_STATUS));
- else
- outb(dma_stat, hwif->dma_base + ATA_DMA_STATUS);
-}
-
-EXPORT_SYMBOL_GPL(ide_dma_host_set);
-#endif /* CONFIG_BLK_DEV_IDEDMA_SFF */
-
/**
* ide_dma_off_quietly - Generic DMA kill
* @drive: drive to control
*
- * Turn off the current DMA on this IDE controller.
+ * Turn off the current DMA on this IDE controller.
*/

void ide_dma_off_quietly(ide_drive_t *drive)
{
- drive->using_dma = 0;
+ drive->dev_flags &= ~IDE_DFLAG_USING_DMA;
ide_toggle_bounce(drive, 0);

drive->hwif->dma_ops->dma_host_set(drive, 0);
}
-
EXPORT_SYMBOL(ide_dma_off_quietly);

/**
@@ -418,7 +190,6 @@ void ide_dma_off(ide_drive_t *drive)
printk(KERN_INFO "%s: DMA disabled\n", drive->name);
ide_dma_off_quietly(drive);
}
-
EXPORT_SYMBOL(ide_dma_off);

/**
@@ -430,167 +201,13 @@ EXPORT_SYMBOL(ide_dma_off);

void ide_dma_on(ide_drive_t *drive)
{
- drive->using_dma = 1;
+ drive->dev_flags |= IDE_DFLAG_USING_DMA;
ide_toggle_bounce(drive, 1);

drive->hwif->dma_ops->dma_host_set(drive, 1);
}

-#ifdef CONFIG_BLK_DEV_IDEDMA_SFF
-/**
- * ide_dma_setup - begin a DMA phase
- * @drive: target device
- *
- * Build an IDE DMA PRD (IDE speak for scatter gather table)
- * and then set up the DMA transfer registers for a device
- * that follows generic IDE PCI DMA behaviour. Controllers can
- * override this function if they need to
- *
- * Returns 0 on success. If a PIO fallback is required then 1
- * is returned.
- */
-
-int ide_dma_setup(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct request *rq = HWGROUP(drive)->rq;
- unsigned int reading;
- u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
- u8 dma_stat;
-
- if (rq_data_dir(rq))
- reading = 0;
- else
- reading = 1 << 3;
-
- /* fall back to pio! */
- if (!ide_build_dmatable(drive, rq)) {
- ide_map_sg(drive, rq);
- return 1;
- }
-
- /* PRD table */
- if (hwif->host_flags & IDE_HFLAG_MMIO)
- writel(hwif->dmatable_dma,
- (void __iomem *)(hwif->dma_base + ATA_DMA_TABLE_OFS));
- else
- outl(hwif->dmatable_dma, hwif->dma_base + ATA_DMA_TABLE_OFS);
-
- /* specify r/w */
- if (mmio)
- writeb(reading, (void __iomem *)(hwif->dma_base + ATA_DMA_CMD));
- else
- outb(reading, hwif->dma_base + ATA_DMA_CMD);
-
- /* read DMA status for INTR & ERROR flags */
- dma_stat = hwif->tp_ops->read_sff_dma_status(hwif);
-
- /* clear INTR & ERROR flags */
- if (mmio)
- writeb(dma_stat | 6,
- (void __iomem *)(hwif->dma_base + ATA_DMA_STATUS));
- else
- outb(dma_stat | 6, hwif->dma_base + ATA_DMA_STATUS);
-
- drive->waiting_for_dma = 1;
- return 0;
-}
-
-EXPORT_SYMBOL_GPL(ide_dma_setup);
-
-void ide_dma_exec_cmd(ide_drive_t *drive, u8 command)
-{
- /* issue cmd to drive */
- ide_execute_command(drive, command, &ide_dma_intr, 2*WAIT_CMD, dma_timer_expiry);
-}
-EXPORT_SYMBOL_GPL(ide_dma_exec_cmd);
-
-void ide_dma_start(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- u8 dma_cmd;
-
- /* Note that this is done *after* the cmd has
- * been issued to the drive, as per the BM-IDE spec.
- * The Promise Ultra33 doesn't work correctly when
- * we do this part before issuing the drive cmd.
- */
- if (hwif->host_flags & IDE_HFLAG_MMIO) {
- dma_cmd = readb((void __iomem *)(hwif->dma_base + ATA_DMA_CMD));
- /* start DMA */
- writeb(dma_cmd | 1,
- (void __iomem *)(hwif->dma_base + ATA_DMA_CMD));
- } else {
- dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
- outb(dma_cmd | 1, hwif->dma_base + ATA_DMA_CMD);
- }
-
- hwif->dma = 1;
- wmb();
-}
-
-EXPORT_SYMBOL_GPL(ide_dma_start);
-
-/* returns 1 on error, 0 otherwise */
-int __ide_dma_end (ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
- u8 dma_stat = 0, dma_cmd = 0;
-
- drive->waiting_for_dma = 0;
-
- if (mmio) {
- /* get DMA command mode */
- dma_cmd = readb((void __iomem *)(hwif->dma_base + ATA_DMA_CMD));
- /* stop DMA */
- writeb(dma_cmd & ~1,
- (void __iomem *)(hwif->dma_base + ATA_DMA_CMD));
- } else {
- dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
- outb(dma_cmd & ~1, hwif->dma_base + ATA_DMA_CMD);
- }
-
- /* get DMA status */
- dma_stat = hwif->tp_ops->read_sff_dma_status(hwif);
-
- if (mmio)
- /* clear the INTR & ERROR bits */
- writeb(dma_stat | 6,
- (void __iomem *)(hwif->dma_base + ATA_DMA_STATUS));
- else
- outb(dma_stat | 6, hwif->dma_base + ATA_DMA_STATUS);
-
- /* purge DMA mappings */
- ide_destroy_dmatable(drive);
- /* verify good DMA status */
- hwif->dma = 0;
- wmb();
- return (dma_stat & 7) != 4 ? (0x10 | dma_stat) : 0;
-}
-
-EXPORT_SYMBOL(__ide_dma_end);
-
-/* returns 1 if dma irq issued, 0 otherwise */
-int ide_dma_test_irq(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = HWIF(drive);
- u8 dma_stat = hwif->tp_ops->read_sff_dma_status(hwif);
-
- /* return 1 if INTR asserted */
- if ((dma_stat & 4) == 4)
- return 1;
- if (!drive->waiting_for_dma)
- printk(KERN_WARNING "%s: (%s) called while not waiting\n",
- drive->name, __func__);
- return 0;
-}
-EXPORT_SYMBOL_GPL(ide_dma_test_irq);
-#else
-static inline int config_drive_for_dma(ide_drive_t *drive) { return 0; }
-#endif /* CONFIG_BLK_DEV_IDEDMA_SFF */
-
-int __ide_dma_bad_drive (ide_drive_t *drive)
+int __ide_dma_bad_drive(ide_drive_t *drive)
{
u16 *id = drive->id;

@@ -602,7 +219,6 @@ int __ide_dma_bad_drive (ide_drive_t *drive)
}
return 0;
}
-
EXPORT_SYMBOL(__ide_dma_bad_drive);

static const u8 xfer_mode_bases[] = {
@@ -618,7 +234,7 @@ static unsigned int ide_get_mode_mask(ide_drive_t *drive, u8 base, u8 req_mode)
const struct ide_port_ops *port_ops = hwif->port_ops;
unsigned int mask = 0;

- switch(base) {
+ switch (base) {
case XFER_UDMA_0:
if ((id[ATA_ID_FIELD_VALID] & 4) == 0)
break;
@@ -719,7 +335,6 @@ u8 ide_find_dma_mode(ide_drive_t *drive, u8 req_mode)

return mode;
}
-
EXPORT_SYMBOL_GPL(ide_find_dma_mode);

static int ide_tune_dma(ide_drive_t *drive)
@@ -727,7 +342,8 @@ static int ide_tune_dma(ide_drive_t *drive)
ide_hwif_t *hwif = drive->hwif;
u8 speed;

- if (drive->nodma || ata_id_has_dma(drive->id) == 0)
+ if (ata_id_has_dma(drive->id) == 0 ||
+ (drive->dev_flags & IDE_DFLAG_NODMA))
return 0;

/* consult the list of known "bad" drives */
@@ -827,66 +443,59 @@ void ide_check_dma_crc(ide_drive_t *drive)
ide_dma_on(drive);
}

-#ifdef CONFIG_BLK_DEV_IDEDMA_SFF
-void ide_dma_lost_irq (ide_drive_t *drive)
+void ide_dma_lost_irq(ide_drive_t *drive)
{
- printk("%s: DMA interrupt recovery\n", drive->name);
+ printk(KERN_ERR "%s: DMA interrupt recovery\n", drive->name);
}
+EXPORT_SYMBOL_GPL(ide_dma_lost_irq);

-EXPORT_SYMBOL(ide_dma_lost_irq);
-
-void ide_dma_timeout (ide_drive_t *drive)
+void ide_dma_timeout(ide_drive_t *drive)
{
- ide_hwif_t *hwif = HWIF(drive);
+ ide_hwif_t *hwif = drive->hwif;

printk(KERN_ERR "%s: timeout waiting for DMA\n", drive->name);

if (hwif->dma_ops->dma_test_irq(drive))
return;

+ ide_dump_status(drive, "DMA timeout", hwif->tp_ops->read_status(hwif));
+
hwif->dma_ops->dma_end(drive);
}
-
-EXPORT_SYMBOL(ide_dma_timeout);
+EXPORT_SYMBOL_GPL(ide_dma_timeout);

void ide_release_dma_engine(ide_hwif_t *hwif)
{
if (hwif->dmatable_cpu) {
- struct pci_dev *pdev = to_pci_dev(hwif->dev);
+ int prd_size = hwif->prd_max_nents * hwif->prd_ent_size;

- pci_free_consistent(pdev, PRD_ENTRIES * PRD_BYTES,
- hwif->dmatable_cpu, hwif->dmatable_dma);
+ dma_free_coherent(hwif->dev, prd_size,
+ hwif->dmatable_cpu, hwif->dmatable_dma);
hwif->dmatable_cpu = NULL;
}
}
+EXPORT_SYMBOL_GPL(ide_release_dma_engine);

int ide_allocate_dma_engine(ide_hwif_t *hwif)
{
- struct pci_dev *pdev = to_pci_dev(hwif->dev);
+ int prd_size;

- hwif->dmatable_cpu = pci_alloc_consistent(pdev,
- PRD_ENTRIES * PRD_BYTES,
- &hwif->dmatable_dma);
+ if (hwif->prd_max_nents == 0)
+ hwif->prd_max_nents = PRD_ENTRIES;
+ if (hwif->prd_ent_size == 0)
+ hwif->prd_ent_size = PRD_BYTES;

- if (hwif->dmatable_cpu)
- return 0;
+ prd_size = hwif->prd_max_nents * hwif->prd_ent_size;

- printk(KERN_ERR "%s: -- Error, unable to allocate DMA table.\n",
+ hwif->dmatable_cpu = dma_alloc_coherent(hwif->dev, prd_size,
+ &hwif->dmatable_dma,
+ GFP_ATOMIC);
+ if (hwif->dmatable_cpu == NULL) {
+ printk(KERN_ERR "%s: unable to allocate PRD table\n",
hwif->name);
+ return -ENOMEM;
+ }

- return 1;
+ return 0;
}
EXPORT_SYMBOL_GPL(ide_allocate_dma_engine);
-
-const struct ide_dma_ops sff_dma_ops = {
- .dma_host_set = ide_dma_host_set,
- .dma_setup = ide_dma_setup,
- .dma_exec_cmd = ide_dma_exec_cmd,
- .dma_start = ide_dma_start,
- .dma_end = __ide_dma_end,
- .dma_test_irq = ide_dma_test_irq,
- .dma_timeout = ide_dma_timeout,
- .dma_lost_irq = ide_dma_lost_irq,
-};
-EXPORT_SYMBOL_GPL(sff_dma_ops);
-#endif /* CONFIG_BLK_DEV_IDEDMA_SFF */
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index d36f155..cf0aa25 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -16,6 +16,7 @@
*/

#define DRV_NAME "ide-floppy"
+#define PFX DRV_NAME ": "

#define IDEFLOPPY_VERSION "1.00"

@@ -48,17 +49,17 @@

#include "ide-floppy.h"

-/* define to see debug info */
-#define IDEFLOPPY_DEBUG_LOG 0
+/* module parameters */
+static unsigned long debug_mask;
+module_param(debug_mask, ulong, 0644);

-/* #define IDEFLOPPY_DEBUG(fmt, args...) printk(KERN_INFO fmt, ## args) */
-#define IDEFLOPPY_DEBUG(fmt, args...)
+/* define to see debug info */
+#define IDEFLOPPY_DEBUG_LOG 0

#if IDEFLOPPY_DEBUG_LOG
-#define debug_log(fmt, args...) \
- printk(KERN_INFO "ide-floppy: " fmt, ## args)
+#define ide_debug_log(lvl, fmt, args...) __ide_debug_log(lvl, fmt, args)
#else
-#define debug_log(fmt, args...) do {} while (0)
+#define ide_debug_log(lvl, fmt, args...) do {} while (0)
#endif

/*
@@ -73,18 +74,17 @@
#define CAPACITY_CURRENT 0x02
#define CAPACITY_NO_CARTRIDGE 0x03

-#define IDEFLOPPY_TICKS_DELAY HZ/20 /* default delay for ZIP 100 (50ms) */
+/*
+ * The following delay solves a problem with ATAPI Zip 100 drive where BSY bit
+ * was apparently being deasserted before the unit was ready to receive data.
+ */
+#define IDEFLOPPY_PC_DELAY (HZ/20) /* default delay for ZIP 100 (50ms) */

/* Error code returned in rq->errors to the higher part of the driver. */
#define IDEFLOPPY_ERROR_GENERAL 101

static DEFINE_MUTEX(idefloppy_ref_mutex);

-#define to_ide_floppy(obj) container_of(obj, struct ide_floppy_obj, kref)
-
-#define ide_floppy_g(disk) \
- container_of((disk)->private_data, struct ide_floppy_obj, driver)
-
static void idefloppy_cleanup_obj(struct kref *);

static struct ide_floppy_obj *ide_floppy_get(struct gendisk *disk)
@@ -92,7 +92,7 @@ static struct ide_floppy_obj *ide_floppy_get(struct gendisk *disk)
struct ide_floppy_obj *floppy = NULL;

mutex_lock(&idefloppy_ref_mutex);
- floppy = ide_floppy_g(disk);
+ floppy = ide_drv_g(disk, ide_floppy_obj);
if (floppy) {
if (ide_device_get(floppy->drive))
floppy = NULL;
@@ -123,13 +123,21 @@ static int idefloppy_end_request(ide_drive_t *drive, int uptodate, int nsecs)
struct request *rq = HWGROUP(drive)->rq;
int error;

- debug_log("Reached %s\n", __func__);
+ ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);

switch (uptodate) {
- case 0: error = IDEFLOPPY_ERROR_GENERAL; break;
- case 1: error = 0; break;
- default: error = uptodate;
+ case 0:
+ error = IDEFLOPPY_ERROR_GENERAL;
+ break;
+
+ case 1:
+ error = 0;
+ break;
+
+ default:
+ error = uptodate;
}
+
if (error)
floppy->failed_pc = NULL;
/* Why does this happen? */
@@ -156,13 +164,13 @@ static void idefloppy_update_buffers(ide_drive_t *drive,
idefloppy_end_request(drive, 1, 0);
}

-static void ide_floppy_callback(ide_drive_t *drive)
+static void ide_floppy_callback(ide_drive_t *drive, int dsc)
{
idefloppy_floppy_t *floppy = drive->driver_data;
- struct ide_atapi_pc *pc = floppy->pc;
+ struct ide_atapi_pc *pc = drive->pc;
int uptodate = pc->error ? 0 : 1;

- debug_log("Reached %s\n", __func__);
+ ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);

if (floppy->failed_pc == pc)
floppy->failed_pc = NULL;
@@ -171,7 +179,7 @@ static void ide_floppy_callback(ide_drive_t *drive)
(pc->rq && blk_pc_request(pc->rq)))
uptodate = 1; /* FIXME */
else if (pc->c[0] == GPCMD_REQUEST_SENSE) {
- u8 *buf = floppy->pc->buf;
+ u8 *buf = pc->buf;

if (!pc->error) {
floppy->sense_key = buf[2] & 0x0F;
@@ -181,99 +189,20 @@ static void ide_floppy_callback(ide_drive_t *drive)
(u16)get_unaligned((u16 *)&buf[16]) : 0x10000;

if (floppy->failed_pc)
- debug_log("pc = %x, ", floppy->failed_pc->c[0]);
+ ide_debug_log(IDE_DBG_PC, "pc = %x, ",
+ floppy->failed_pc->c[0]);

- debug_log("sense key = %x, asc = %x, ascq = %x\n",
- floppy->sense_key, floppy->asc, floppy->ascq);
+ ide_debug_log(IDE_DBG_SENSE, "sense key = %x, asc = %x,"
+ "ascq = %x\n", floppy->sense_key,
+ floppy->asc, floppy->ascq);
} else
- printk(KERN_ERR "Error in REQUEST SENSE itself - "
- "Aborting request!\n");
+ printk(KERN_ERR PFX "Error in REQUEST SENSE itself - "
+ "Aborting request!\n");
}

idefloppy_end_request(drive, uptodate, 0);
}

-void ide_floppy_create_request_sense_cmd(struct ide_atapi_pc *pc)
-{
- ide_init_pc(pc);
- pc->c[0] = GPCMD_REQUEST_SENSE;
- pc->c[4] = 255;
- pc->req_xfer = 18;
-}
-
-/*
- * Called when an error was detected during the last packet command. We queue a
- * request sense packet command in the head of the request list.
- */
-static void idefloppy_retry_pc(ide_drive_t *drive)
-{
- struct ide_floppy_obj *floppy = drive->driver_data;
- struct request *rq = &floppy->request_sense_rq;
- struct ide_atapi_pc *pc = &floppy->request_sense_pc;
-
- (void)ide_read_error(drive);
- ide_floppy_create_request_sense_cmd(pc);
- ide_queue_pc_head(drive, floppy->disk, pc, rq);
-}
-
-/* The usual interrupt handler called during a packet command. */
-static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive)
-{
- idefloppy_floppy_t *floppy = drive->driver_data;
-
- return ide_pc_intr(drive, floppy->pc, idefloppy_pc_intr,
- WAIT_FLOPPY_CMD, NULL, idefloppy_update_buffers,
- idefloppy_retry_pc, NULL, ide_io_buffers);
-}
-
-/*
- * What we have here is a classic case of a top half / bottom half interrupt
- * service routine. In interrupt mode, the device sends an interrupt to signal
- * that it is ready to receive a packet. However, we need to delay about 2-3
- * ticks before issuing the packet or we gets in trouble.
- */
-static int idefloppy_transfer_pc(ide_drive_t *drive)
-{
- idefloppy_floppy_t *floppy = drive->driver_data;
-
- /* Send the actual packet */
- drive->hwif->tp_ops->output_data(drive, NULL, floppy->pc->c, 12);
-
- /* Timeout for the packet command */
- return WAIT_FLOPPY_CMD;
-}
-
-/*
- * Called as an interrupt (or directly). When the device says it's ready for a
- * packet, we schedule the packet transfer to occur about 2-3 ticks later in
- * transfer_pc.
- */
-static ide_startstop_t idefloppy_start_pc_transfer(ide_drive_t *drive)
-{
- idefloppy_floppy_t *floppy = drive->driver_data;
- struct ide_atapi_pc *pc = floppy->pc;
- ide_expiry_t *expiry;
- unsigned int timeout;
-
- /*
- * The following delay solves a problem with ATAPI Zip 100 drives
- * where the Busy flag was apparently being deasserted before the
- * unit was ready to receive data. This was happening on a
- * 1200 MHz Athlon system. 10/26/01 25msec is too short,
- * 40 and 50msec work well. idefloppy_pc_intr will not be actually
- * used until after the packet is moved in about 50 msec.
- */
- if (drive->atapi_flags & IDE_AFLAG_ZIP_DRIVE) {
- timeout = floppy->ticks;
- expiry = &idefloppy_transfer_pc;
- } else {
- timeout = WAIT_FLOPPY_CMD;
- expiry = NULL;
- }
-
- return ide_transfer_pc(drive, pc, idefloppy_pc_intr, timeout, expiry);
-}
-
static void ide_floppy_report_error(idefloppy_floppy_t *floppy,
struct ide_atapi_pc *pc)
{
@@ -283,7 +212,7 @@ static void ide_floppy_report_error(idefloppy_floppy_t *floppy,
floppy->ascq == 0x00)
return;

- printk(KERN_ERR "ide-floppy: %s: I/O error, pc = %2x, key = %2x, "
+ printk(KERN_ERR PFX "%s: I/O error, pc = %2x, key = %2x, "
"asc = %2x, ascq = %2x\n",
floppy->drive->name, pc->c[0], floppy->sense_key,
floppy->asc, floppy->ascq);
@@ -298,8 +227,9 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive,
if (floppy->failed_pc == NULL &&
pc->c[0] != GPCMD_REQUEST_SENSE)
floppy->failed_pc = pc;
+
/* Set the current packet command */
- floppy->pc = pc;
+ drive->pc = pc;

if (pc->retries > IDEFLOPPY_MAX_PC_RETRIES) {
if (!(pc->flags & PC_FLAG_SUPPRESS_ERROR))
@@ -308,16 +238,15 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive,
pc->error = IDEFLOPPY_ERROR_GENERAL;

floppy->failed_pc = NULL;
- drive->pc_callback(drive);
+ drive->pc_callback(drive, 0);
return ide_stopped;
}

- debug_log("Retry number - %d\n", pc->retries);
+ ide_debug_log(IDE_DBG_FUNC, "%s: Retry #%d\n", __func__, pc->retries);

pc->retries++;

- return ide_issue_pc(drive, pc, idefloppy_start_pc_transfer,
- WAIT_FLOPPY_CMD, NULL);
+ return ide_issue_pc(drive, WAIT_FLOPPY_CMD, NULL);
}

void ide_floppy_create_read_capacity_cmd(struct ide_atapi_pc *pc)
@@ -347,23 +276,23 @@ void ide_floppy_create_mode_sense_cmd(struct ide_atapi_pc *pc, u8 page_code)
length += 32;
break;
default:
- printk(KERN_ERR "ide-floppy: unsupported page code "
- "in create_mode_sense_cmd\n");
+ printk(KERN_ERR PFX "unsupported page code in %s\n", __func__);
}
put_unaligned(cpu_to_be16(length), (u16 *) &pc->c[7]);
pc->req_xfer = length;
}

-static void idefloppy_create_rw_cmd(idefloppy_floppy_t *floppy,
+static void idefloppy_create_rw_cmd(ide_drive_t *drive,
struct ide_atapi_pc *pc, struct request *rq,
unsigned long sector)
{
+ idefloppy_floppy_t *floppy = drive->driver_data;
int block = sector / floppy->bs_factor;
int blocks = rq->nr_sectors / floppy->bs_factor;
int cmd = rq_data_dir(rq);

- debug_log("create_rw10_cmd: block == %d, blocks == %d\n",
- block, blocks);
+ ide_debug_log(IDE_DBG_FUNC, "%s: block: %d, blocks: %d\n", __func__,
+ block, blocks);

ide_init_pc(pc);
pc->c[0] = cmd == READ ? GPCMD_READ_10 : GPCMD_WRITE_10;
@@ -408,41 +337,42 @@ static ide_startstop_t idefloppy_do_request(ide_drive_t *drive,
struct ide_atapi_pc *pc;
unsigned long block = (unsigned long)block_s;

- debug_log("%s: dev: %s, cmd: 0x%x, cmd_type: %x, errors: %d\n",
- __func__, rq->rq_disk ? rq->rq_disk->disk_name : "?",
- rq->cmd[0], rq->cmd_type, rq->errors);
+ ide_debug_log(IDE_DBG_FUNC, "%s: dev: %s, cmd: 0x%x, cmd_type: %x, "
+ "errors: %d\n",
+ __func__, rq->rq_disk ? rq->rq_disk->disk_name : "?",
+ rq->cmd[0], rq->cmd_type, rq->errors);

- debug_log("%s: sector: %ld, nr_sectors: %ld, current_nr_sectors: %d\n",
- __func__, (long)rq->sector, rq->nr_sectors,
- rq->current_nr_sectors);
+ ide_debug_log(IDE_DBG_FUNC, "%s: sector: %ld, nr_sectors: %ld, "
+ "current_nr_sectors: %d\n",
+ __func__, (long)rq->sector, rq->nr_sectors,
+ rq->current_nr_sectors);

if (rq->errors >= ERROR_MAX) {
if (floppy->failed_pc)
ide_floppy_report_error(floppy, floppy->failed_pc);
else
- printk(KERN_ERR "ide-floppy: %s: I/O error\n",
- drive->name);
+ printk(KERN_ERR PFX "%s: I/O error\n", drive->name);
+
idefloppy_end_request(drive, 0, 0);
return ide_stopped;
}
if (blk_fs_request(rq)) {
if (((long)rq->sector % floppy->bs_factor) ||
(rq->nr_sectors % floppy->bs_factor)) {
- printk(KERN_ERR "%s: unsupported r/w request size\n",
- drive->name);
+ printk(KERN_ERR PFX "%s: unsupported r/w rq size\n",
+ drive->name);
idefloppy_end_request(drive, 0, 0);
return ide_stopped;
}
pc = &floppy->queued_pc;
- idefloppy_create_rw_cmd(floppy, pc, rq, block);
+ idefloppy_create_rw_cmd(drive, pc, rq, block);
} else if (blk_special_request(rq)) {
pc = (struct ide_atapi_pc *) rq->buffer;
} else if (blk_pc_request(rq)) {
pc = &floppy->queued_pc;
idefloppy_blockpc_cmd(floppy, pc, rq);
} else {
- blk_dump_rq_flags(rq,
- "ide-floppy: unsupported command in queue");
+ blk_dump_rq_flags(rq, PFX "unsupported command in queue");
idefloppy_end_request(drive, 0, 0);
return ide_stopped;
}
@@ -475,8 +405,7 @@ static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive)
ide_floppy_create_mode_sense_cmd(&pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE);

if (ide_queue_pc_tail(drive, disk, &pc)) {
- printk(KERN_ERR "ide-floppy: Can't get flexible disk page"
- " parameters\n");
+ printk(KERN_ERR PFX "Can't get flexible disk page params\n");
return 1;
}

@@ -499,7 +428,7 @@ static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive)
capacity = cyls * heads * sectors * sector_size;

if (memcmp(page, &floppy->flexible_disk_page, 32))
- printk(KERN_INFO "%s: %dkB, %d/%d/%d CHS, %d kBps, "
+ printk(KERN_INFO PFX "%s: %dkB, %d/%d/%d CHS, %d kBps, "
"%d sector size, %d rpm\n",
drive->name, capacity / 1024, cyls, heads,
sectors, transfer_rate / 8, sector_size, rpm);
@@ -511,7 +440,7 @@ static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive)
lba_capacity = floppy->blocks * floppy->block_size;

if (capacity < lba_capacity) {
- printk(KERN_NOTICE "%s: The disk reports a capacity of %d "
+ printk(KERN_NOTICE PFX "%s: The disk reports a capacity of %d "
"bytes, but the drive only handles %d\n",
drive->name, lba_capacity, capacity);
floppy->blocks = floppy->block_size ?
@@ -541,7 +470,7 @@ static int ide_floppy_get_capacity(ide_drive_t *drive)

ide_floppy_create_read_capacity_cmd(&pc);
if (ide_queue_pc_tail(drive, disk, &pc)) {
- printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n");
+ printk(KERN_ERR PFX "Can't get floppy parameters\n");
return 1;
}
header_len = pc.buf[3];
@@ -554,8 +483,9 @@ static int ide_floppy_get_capacity(ide_drive_t *drive)
blocks = be32_to_cpup((__be32 *)&pc.buf[desc_start]);
length = be16_to_cpup((__be16 *)&pc.buf[desc_start + 6]);

- debug_log("Descriptor %d: %dkB, %d blocks, %d sector size\n",
- i, blocks * length / 1024, blocks, length);
+ ide_debug_log(IDE_DBG_PROBE, "Descriptor %d: %dkB, %d blocks, "
+ "%d sector size\n",
+ i, blocks * length / 1024, blocks, length);

if (i)
continue;
@@ -575,23 +505,24 @@ static int ide_floppy_get_capacity(ide_drive_t *drive)
case CAPACITY_CURRENT:
/* Normal Zip/LS-120 disks */
if (memcmp(cap_desc, &floppy->cap_desc, 8))
- printk(KERN_INFO "%s: %dkB, %d blocks, %d "
- "sector size\n", drive->name,
- blocks * length / 1024, blocks, length);
+ printk(KERN_INFO PFX "%s: %dkB, %d blocks, %d "
+ "sector size\n",
+ drive->name, blocks * length / 1024,
+ blocks, length);
memcpy(&floppy->cap_desc, cap_desc, 8);

if (!length || length % 512) {
- printk(KERN_NOTICE "%s: %d bytes block size "
- "not supported\n", drive->name, length);
+ printk(KERN_NOTICE PFX "%s: %d bytes block size"
+ " not supported\n", drive->name, length);
} else {
floppy->blocks = blocks;
floppy->block_size = length;
floppy->bs_factor = length / 512;
if (floppy->bs_factor != 1)
- printk(KERN_NOTICE "%s: warning: non "
- "512 bytes block size not "
- "fully supported\n",
- drive->name);
+ printk(KERN_NOTICE PFX "%s: Warning: "
+ "non 512 bytes block size not "
+ "fully supported\n",
+ drive->name);
rc = 0;
}
break;
@@ -600,15 +531,16 @@ static int ide_floppy_get_capacity(ide_drive_t *drive)
* This is a KERN_ERR so it appears on screen
* for the user to see
*/
- printk(KERN_ERR "%s: No disk in drive\n", drive->name);
+ printk(KERN_ERR PFX "%s: No disk in drive\n",
+ drive->name);
break;
case CAPACITY_INVALID:
- printk(KERN_ERR "%s: Invalid capacity for disk "
+ printk(KERN_ERR PFX "%s: Invalid capacity for disk "
"in drive\n", drive->name);
break;
}
- debug_log("Descriptor 0 Code: %d\n",
- pc.buf[desc_start + 4] & 0x03);
+ ide_debug_log(IDE_DBG_PROBE, "Descriptor 0 Code: %d\n",
+ pc.buf[desc_start + 4] & 0x03);
}

/* Clik! disk does not support get_flexible_disk_page */
@@ -620,7 +552,7 @@ static int ide_floppy_get_capacity(ide_drive_t *drive)
return rc;
}

-static sector_t idefloppy_capacity(ide_drive_t *drive)
+sector_t ide_floppy_capacity(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;
unsigned long capacity = floppy->blocks * floppy->bs_factor;
@@ -628,46 +560,14 @@ static sector_t idefloppy_capacity(ide_drive_t *drive)
return capacity;
}

-#ifdef CONFIG_IDE_PROC_FS
-ide_devset_rw_field(bios_cyl, bios_cyl);
-ide_devset_rw_field(bios_head, bios_head);
-ide_devset_rw_field(bios_sect, bios_sect);
-
-static int get_ticks(ide_drive_t *drive)
-{
- idefloppy_floppy_t *floppy = drive->driver_data;
- return floppy->ticks;
-}
-
-static int set_ticks(ide_drive_t *drive, int arg)
-{
- idefloppy_floppy_t *floppy = drive->driver_data;
- floppy->ticks = arg;
- return 0;
-}
-
-IDE_DEVSET(ticks, DS_SYNC, get_ticks, set_ticks);
-
-static const struct ide_proc_devset idefloppy_settings[] = {
- IDE_PROC_DEVSET(bios_cyl, 0, 1023),
- IDE_PROC_DEVSET(bios_head, 0, 255),
- IDE_PROC_DEVSET(bios_sect, 0, 63),
- IDE_PROC_DEVSET(ticks, 0, 255),
- { 0 },
-};
-#endif
-
static void idefloppy_setup(ide_drive_t *drive, idefloppy_floppy_t *floppy)
{
u16 *id = drive->id;
- u8 gcw[2];
-
- *((u16 *)&gcw) = id[ATA_ID_CONFIG];

- drive->pc_callback = ide_floppy_callback;
+ drive->pc_callback = ide_floppy_callback;
+ drive->pc_update_buffers = idefloppy_update_buffers;
+ drive->pc_io_buffers = ide_io_buffers;

- if (((gcw[0] & 0x60) >> 5) == 1)
- drive->atapi_flags |= IDE_AFLAG_DRQ_INTERRUPT;
/*
* We used to check revisions here. At this point however I'm giving up.
* Just assume they are all broken, its easier.
@@ -680,7 +580,7 @@ static void idefloppy_setup(ide_drive_t *drive, idefloppy_floppy_t *floppy)
if (!strncmp((char *)&id[ATA_ID_PROD], "IOMEGA ZIP 100 ATAPI", 20)) {
drive->atapi_flags |= IDE_AFLAG_ZIP_DRIVE;
/* This value will be visible in the /proc/ide/hdx/settings */
- floppy->ticks = IDEFLOPPY_TICKS_DELAY;
+ drive->pc_delay = IDEFLOPPY_PC_DELAY;
blk_queue_max_sectors(drive->queue, 64);
}

@@ -714,7 +614,7 @@ static void ide_floppy_remove(ide_drive_t *drive)

static void idefloppy_cleanup_obj(struct kref *kref)
{
- struct ide_floppy_obj *floppy = to_ide_floppy(kref);
+ struct ide_floppy_obj *floppy = to_ide_drv(kref, ide_floppy_obj);
ide_drive_t *drive = floppy->drive;
struct gendisk *g = floppy->disk;

@@ -724,24 +624,6 @@ static void idefloppy_cleanup_obj(struct kref *kref)
kfree(floppy);
}

-#ifdef CONFIG_IDE_PROC_FS
-static int proc_idefloppy_read_capacity(char *page, char **start, off_t off,
- int count, int *eof, void *data)
-{
- ide_drive_t*drive = (ide_drive_t *)data;
- int len;
-
- len = sprintf(page, "%llu\n", (long long)idefloppy_capacity(drive));
- PROC_IDE_READ_RETURN(page, start, off, count, eof, len);
-}
-
-static ide_proc_entry_t idefloppy_proc[] = {
- { "capacity", S_IFREG|S_IRUGO, proc_idefloppy_read_capacity, NULL },
- { "geometry", S_IFREG|S_IRUGO, proc_ide_read_geometry, NULL },
- { NULL, 0, NULL, NULL }
-};
-#endif /* CONFIG_IDE_PROC_FS */
-
static int ide_floppy_probe(ide_drive_t *);

static ide_driver_t idefloppy_driver = {
@@ -753,13 +635,12 @@ static ide_driver_t idefloppy_driver = {
.probe = ide_floppy_probe,
.remove = ide_floppy_remove,
.version = IDEFLOPPY_VERSION,
- .media = ide_floppy,
.do_request = idefloppy_do_request,
.end_request = idefloppy_end_request,
.error = __ide_error,
#ifdef CONFIG_IDE_PROC_FS
- .proc = idefloppy_proc,
- .settings = idefloppy_settings,
+ .proc = ide_floppy_proc,
+ .settings = ide_floppy_settings,
#endif
};

@@ -770,14 +651,14 @@ static int idefloppy_open(struct inode *inode, struct file *filp)
ide_drive_t *drive;
int ret = 0;

- debug_log("Reached %s\n", __func__);
-
floppy = ide_floppy_get(disk);
if (!floppy)
return -ENXIO;

drive = floppy->drive;

+ ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
+
floppy->openers++;

if (floppy->openers == 1) {
@@ -822,10 +703,10 @@ out_put_floppy:
static int idefloppy_release(struct inode *inode, struct file *filp)
{
struct gendisk *disk = inode->i_bdev->bd_disk;
- struct ide_floppy_obj *floppy = ide_floppy_g(disk);
+ struct ide_floppy_obj *floppy = ide_drv_g(disk, ide_floppy_obj);
ide_drive_t *drive = floppy->drive;

- debug_log("Reached %s\n", __func__);
+ ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);

if (floppy->openers == 1) {
ide_set_media_lock(drive, disk, 0);
@@ -841,7 +722,8 @@ static int idefloppy_release(struct inode *inode, struct file *filp)

static int idefloppy_getgeo(struct block_device *bdev, struct hd_geometry *geo)
{
- struct ide_floppy_obj *floppy = ide_floppy_g(bdev->bd_disk);
+ struct ide_floppy_obj *floppy = ide_drv_g(bdev->bd_disk,
+ ide_floppy_obj);
ide_drive_t *drive = floppy->drive;

geo->heads = drive->bios_head;
@@ -850,64 +732,15 @@ static int idefloppy_getgeo(struct block_device *bdev, struct hd_geometry *geo)
return 0;
}

-static int ide_floppy_lockdoor(ide_drive_t *drive, struct ide_atapi_pc *pc,
- unsigned long arg, unsigned int cmd)
-{
- idefloppy_floppy_t *floppy = drive->driver_data;
- struct gendisk *disk = floppy->disk;
- int prevent = (arg && cmd != CDROMEJECT) ? 1 : 0;
-
- if (floppy->openers > 1)
- return -EBUSY;
-
- ide_set_media_lock(drive, disk, prevent);
-
- if (cmd == CDROMEJECT)
- ide_do_start_stop(drive, disk, 2);
-
- return 0;
-}
-
-static int idefloppy_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- struct block_device *bdev = inode->i_bdev;
- struct ide_floppy_obj *floppy = ide_floppy_g(bdev->bd_disk);
- ide_drive_t *drive = floppy->drive;
- struct ide_atapi_pc pc;
- void __user *argp = (void __user *)arg;
- int err;
-
- if (cmd == CDROMEJECT || cmd == CDROM_LOCKDOOR)
- return ide_floppy_lockdoor(drive, &pc, arg, cmd);
-
- err = ide_floppy_format_ioctl(drive, file, cmd, argp);
- if (err != -ENOTTY)
- return err;
-
- /*
- * skip SCSI_IOCTL_SEND_COMMAND (deprecated)
- * and CDROM_SEND_PACKET (legacy) ioctls
- */
- if (cmd != CDROM_SEND_PACKET && cmd != SCSI_IOCTL_SEND_COMMAND)
- err = scsi_cmd_ioctl(file, bdev->bd_disk->queue,
- bdev->bd_disk, cmd, argp);
-
- if (err == -ENOTTY)
- err = generic_ide_ioctl(drive, file, bdev, cmd, arg);
-
- return err;
-}
-
static int idefloppy_media_changed(struct gendisk *disk)
{
- struct ide_floppy_obj *floppy = ide_floppy_g(disk);
+ struct ide_floppy_obj *floppy = ide_drv_g(disk, ide_floppy_obj);
ide_drive_t *drive = floppy->drive;
int ret;

/* do not scan partitions twice if this is a removable device */
- if (drive->attach) {
- drive->attach = 0;
+ if (drive->dev_flags & IDE_DFLAG_ATTACH) {
+ drive->dev_flags &= ~IDE_DFLAG_ATTACH;
return 0;
}
ret = !!(drive->atapi_flags & IDE_AFLAG_MEDIA_CHANGED);
@@ -917,8 +750,8 @@ static int idefloppy_media_changed(struct gendisk *disk)

static int idefloppy_revalidate_disk(struct gendisk *disk)
{
- struct ide_floppy_obj *floppy = ide_floppy_g(disk);
- set_capacity(disk, idefloppy_capacity(floppy->drive));
+ struct ide_floppy_obj *floppy = ide_drv_g(disk, ide_floppy_obj);
+ set_capacity(disk, ide_floppy_capacity(floppy->drive));
return 0;
}

@@ -926,7 +759,7 @@ static struct block_device_operations idefloppy_ops = {
.owner = THIS_MODULE,
.open = idefloppy_open,
.release = idefloppy_release,
- .ioctl = idefloppy_ioctl,
+ .ioctl = ide_floppy_ioctl,
.getgeo = idefloppy_getgeo,
.media_changed = idefloppy_media_changed,
.revalidate_disk = idefloppy_revalidate_disk
@@ -944,14 +777,14 @@ static int ide_floppy_probe(ide_drive_t *drive)
goto failed;

if (!ide_check_atapi_device(drive, DRV_NAME)) {
- printk(KERN_ERR "ide-floppy: %s: not supported by this version"
- " of ide-floppy\n", drive->name);
+ printk(KERN_ERR PFX "%s: not supported by this version of "
+ DRV_NAME "\n", drive->name);
goto failed;
}
floppy = kzalloc(sizeof(idefloppy_floppy_t), GFP_KERNEL);
if (!floppy) {
- printk(KERN_ERR "ide-floppy: %s: Can't allocate a floppy"
- " structure\n", drive->name);
+ printk(KERN_ERR PFX "%s: Can't allocate a floppy structure\n",
+ drive->name);
goto failed;
}

@@ -971,13 +804,16 @@ static int ide_floppy_probe(ide_drive_t *drive)

drive->driver_data = floppy;

+ drive->debug_mask = debug_mask;
+
idefloppy_setup(drive, floppy);
+ drive->dev_flags |= IDE_DFLAG_ATTACH;

g->minors = 1 << PARTN_BITS;
g->driverfs_dev = &drive->gendev;
- g->flags = drive->removable ? GENHD_FL_REMOVABLE : 0;
+ if (drive->dev_flags & IDE_DFLAG_REMOVABLE)
+ g->flags = GENHD_FL_REMOVABLE;
g->fops = &idefloppy_ops;
- drive->attach = 1;
add_disk(g);
return 0;

@@ -994,7 +830,7 @@ static void __exit idefloppy_exit(void)

static int __init idefloppy_init(void)
{
- printk("ide-floppy driver " IDEFLOPPY_VERSION "\n");
+ printk(KERN_INFO DRV_NAME " driver " IDEFLOPPY_VERSION "\n");
return driver_register(&idefloppy_driver.gen_driver);
}

diff --git a/drivers/ide/ide-floppy.h b/drivers/ide/ide-floppy.h
index ecadc2b..17cf865 100644
--- a/drivers/ide/ide-floppy.h
+++ b/drivers/ide/ide-floppy.h
@@ -13,20 +13,14 @@ typedef struct ide_floppy_obj {
struct kref kref;
unsigned int openers; /* protected by BKL for now */

- /* Current packet command */
- struct ide_atapi_pc *pc;
/* Last failed packet command */
struct ide_atapi_pc *failed_pc;
/* used for blk_{fs,pc}_request() requests */
struct ide_atapi_pc queued_pc;

- struct ide_atapi_pc request_sense_pc;
- struct request request_sense_rq;
-
/* Last error information */
u8 sense_key, asc, ascq;
- /* delay this long before sending packet command */
- u8 ticks;
+
int progress_indication;

/* Device information */
@@ -54,10 +48,15 @@ typedef struct ide_floppy_obj {
/* ide-floppy.c */
void ide_floppy_create_mode_sense_cmd(struct ide_atapi_pc *, u8);
void ide_floppy_create_read_capacity_cmd(struct ide_atapi_pc *);
-void ide_floppy_create_request_sense_cmd(struct ide_atapi_pc *);
+sector_t ide_floppy_capacity(ide_drive_t *);

/* ide-floppy_ioctl.c */
-int ide_floppy_format_ioctl(ide_drive_t *, struct file *, unsigned int,
- void __user *);
+int ide_floppy_ioctl(struct inode *, struct file *, unsigned, unsigned long);
+
+#ifdef CONFIG_IDE_PROC_FS
+/* ide-floppy_proc.c */
+extern ide_proc_entry_t ide_floppy_proc[];
+extern const struct ide_proc_devset ide_floppy_settings[];
+#endif

#endif /*__IDE_FLOPPY_H */
diff --git a/drivers/ide/ide-floppy_ioctl.c b/drivers/ide/ide-floppy_ioctl.c
index 5ffc451..a3a7a08 100644
--- a/drivers/ide/ide-floppy_ioctl.c
+++ b/drivers/ide/ide-floppy_ioctl.c
@@ -195,7 +195,7 @@ static int ide_floppy_get_format_progress(ide_drive_t *drive, int __user *arg)
int progress_indication = 0x10000;

if (drive->atapi_flags & IDE_AFLAG_SRFP) {
- ide_floppy_create_request_sense_cmd(&pc);
+ ide_create_request_sense_cmd(drive, &pc);
if (ide_queue_pc_tail(drive, floppy->disk, &pc))
return -EIO;

@@ -223,8 +223,26 @@ static int ide_floppy_get_format_progress(ide_drive_t *drive, int __user *arg)
return 0;
}

-int ide_floppy_format_ioctl(ide_drive_t *drive, struct file *file,
- unsigned int cmd, void __user *argp)
+static int ide_floppy_lockdoor(ide_drive_t *drive, struct ide_atapi_pc *pc,
+ unsigned long arg, unsigned int cmd)
+{
+ idefloppy_floppy_t *floppy = drive->driver_data;
+ struct gendisk *disk = floppy->disk;
+ int prevent = (arg && cmd != CDROMEJECT) ? 1 : 0;
+
+ if (floppy->openers > 1)
+ return -EBUSY;
+
+ ide_set_media_lock(drive, disk, prevent);
+
+ if (cmd == CDROMEJECT)
+ ide_do_start_stop(drive, disk, 2);
+
+ return 0;
+}
+
+static int ide_floppy_format_ioctl(ide_drive_t *drive, struct file *file,
+ unsigned int cmd, void __user *argp)
{
switch (cmd) {
case IDEFLOPPY_IOCTL_FORMAT_SUPPORTED:
@@ -241,3 +259,35 @@ int ide_floppy_format_ioctl(ide_drive_t *drive, struct file *file,
return -ENOTTY;
}
}
+
+int ide_floppy_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ struct block_device *bdev = inode->i_bdev;
+ struct ide_floppy_obj *floppy = ide_drv_g(bdev->bd_disk,
+ ide_floppy_obj);
+ ide_drive_t *drive = floppy->drive;
+ struct ide_atapi_pc pc;
+ void __user *argp = (void __user *)arg;
+ int err;
+
+ if (cmd == CDROMEJECT || cmd == CDROM_LOCKDOOR)
+ return ide_floppy_lockdoor(drive, &pc, arg, cmd);
+
+ err = ide_floppy_format_ioctl(drive, file, cmd, argp);
+ if (err != -ENOTTY)
+ return err;
+
+ /*
+ * skip SCSI_IOCTL_SEND_COMMAND (deprecated)
+ * and CDROM_SEND_PACKET (legacy) ioctls
+ */
+ if (cmd != CDROM_SEND_PACKET && cmd != SCSI_IOCTL_SEND_COMMAND)
+ err = scsi_cmd_ioctl(file, bdev->bd_disk->queue,
+ bdev->bd_disk, cmd, argp);
+
+ if (err == -ENOTTY)
+ err = generic_ide_ioctl(drive, file, bdev, cmd, arg);
+
+ return err;
+}
diff --git a/drivers/ide/ide-floppy_proc.c b/drivers/ide/ide-floppy_proc.c
new file mode 100644
index 0000000..76f0c6c
--- /dev/null
+++ b/drivers/ide/ide-floppy_proc.c
@@ -0,0 +1,33 @@
+#include <linux/kernel.h>
+#include <linux/ide.h>
+
+#include "ide-floppy.h"
+
+static int proc_idefloppy_read_capacity(char *page, char **start, off_t off,
+ int count, int *eof, void *data)
+{
+ ide_drive_t*drive = (ide_drive_t *)data;
+ int len;
+
+ len = sprintf(page, "%llu\n", (long long)ide_floppy_capacity(drive));
+ PROC_IDE_READ_RETURN(page, start, off, count, eof, len);
+}
+
+ide_proc_entry_t ide_floppy_proc[] = {
+ { "capacity", S_IFREG|S_IRUGO, proc_idefloppy_read_capacity, NULL },
+ { "geometry", S_IFREG|S_IRUGO, proc_ide_read_geometry, NULL },
+ { NULL, 0, NULL, NULL }
+};
+
+ide_devset_rw_field(bios_cyl, bios_cyl);
+ide_devset_rw_field(bios_head, bios_head);
+ide_devset_rw_field(bios_sect, bios_sect);
+ide_devset_rw_field(ticks, pc_delay);
+
+const struct ide_proc_devset ide_floppy_settings[] = {
+ IDE_PROC_DEVSET(bios_cyl, 0, 1023),
+ IDE_PROC_DEVSET(bios_head, 0, 255),
+ IDE_PROC_DEVSET(bios_sect, 0, 63),
+ IDE_PROC_DEVSET(ticks, 0, 255),
+ { 0 },
+};
diff --git a/drivers/ide/ide-generic.c b/drivers/ide/ide-generic.c
index 0a3cb0c..81a5282 100644
--- a/drivers/ide/ide-generic.c
+++ b/drivers/ide/ide-generic.c
@@ -137,15 +137,10 @@ static void ide_generic_check_pci_legacy_iobases(int *primary, int *secondary)

static int __init ide_generic_init(void)
{
- hw_regs_t hw[MAX_HWIFS], *hws[MAX_HWIFS];
- struct ide_host *host;
+ hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
unsigned long io_addr;
- int i, rc, primary = 0, secondary = 0;
+ int i, rc = 0, primary = 0, secondary = 0;

-#ifdef CONFIG_MIPS
- if (!ide_probe_legacy())
- return -ENODEV;
-#endif
ide_generic_check_pci_legacy_iobases(&primary, &secondary);

if (!probe_mask) {
@@ -161,13 +156,9 @@ static int __init ide_generic_init(void)
printk(KERN_INFO DRV_NAME ": enforcing probing of I/O ports "
"upon user request\n");

- memset(hws, 0, sizeof(hw_regs_t *) * MAX_HWIFS);
-
for (i = 0; i < ARRAY_SIZE(legacy_bases); i++) {
io_addr = legacy_bases[i];

- hws[i] = NULL;
-
if ((probe_mask & (1 << i)) && io_addr) {
if (!request_region(io_addr, 8, DRV_NAME)) {
printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX "
@@ -184,45 +175,27 @@ static int __init ide_generic_init(void)
continue;
}

- memset(&hw[i], 0, sizeof(hw[i]));
- ide_std_init_ports(&hw[i], io_addr, io_addr + 0x206);
+ memset(&hw, 0, sizeof(hw));
+ ide_std_init_ports(&hw, io_addr, io_addr + 0x206);
#ifdef CONFIG_IA64
- hw[i].irq = isa_irq_to_vector(legacy_irqs[i]);
+ hw.irq = isa_irq_to_vector(legacy_irqs[i]);
#else
- hw[i].irq = legacy_irqs[i];
+ hw.irq = legacy_irqs[i];
#endif
- hw[i].chipset = ide_generic;
+ hw.chipset = ide_generic;

- hws[i] = &hw[i];
+ rc = ide_host_add(NULL, hws, NULL);
+ if (rc) {
+ release_region(io_addr + 0x206, 1);
+ release_region(io_addr, 8);
+ }
}
}

- host = ide_host_alloc_all(NULL, hws);
- if (host == NULL) {
- rc = -ENOMEM;
- goto err;
- }
-
- rc = ide_host_register(host, NULL, hws);
- if (rc)
- goto err_free;
-
if (ide_generic_sysfs_init())
printk(KERN_ERR DRV_NAME ": failed to create ide_generic "
"class\n");

- return 0;
-err_free:
- ide_host_free(host);
-err:
- for (i = 0; i < MAX_HWIFS; i++) {
- if (hws[i] == NULL)
- continue;
-
- io_addr = hws[i]->io_ports.data_addr;
- release_region(io_addr + 0x206, 1);
- release_region(io_addr, 8);
- }
return rc;
}

diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 1c51949..77c6eae 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -78,8 +78,9 @@ static int __ide_end_request(ide_drive_t *drive, struct request *rq,
* decide whether to reenable DMA -- 3 is a random magic for now,
* if we DMA timeout more than 3 times, just stay in PIO
*/
- if (drive->state == DMA_PIO_RETRY && drive->retry_pio <= 3) {
- drive->state = 0;
+ if ((drive->dev_flags & IDE_DFLAG_DMA_PIO_RETRY) &&
+ drive->retry_pio <= 3) {
+ drive->dev_flags &= ~IDE_DFLAG_DMA_PIO_RETRY;
ide_dma_on(drive);
}

@@ -131,21 +132,6 @@ int ide_end_request (ide_drive_t *drive, int uptodate, int nr_sectors)
}
EXPORT_SYMBOL(ide_end_request);

-/*
- * Power Management state machine. This one is rather trivial for now,
- * we should probably add more, like switching back to PIO on suspend
- * to help some BIOSes, re-do the door locking on resume, etc...
- */
-
-enum {
- ide_pm_flush_cache = ide_pm_state_start_suspend,
- idedisk_pm_standby,
-
- idedisk_pm_restore_pio = ide_pm_state_start_resume,
- idedisk_pm_idle,
- ide_pm_restore_dma,
-};
-
static void ide_complete_power_step(ide_drive_t *drive, struct request *rq, u8 stat, u8 error)
{
struct request_pm_state *pm = rq->data;
@@ -154,20 +140,20 @@ static void ide_complete_power_step(ide_drive_t *drive, struct request *rq, u8 s
return;

switch (pm->pm_step) {
- case ide_pm_flush_cache: /* Suspend step 1 (flush cache) complete */
+ case IDE_PM_FLUSH_CACHE: /* Suspend step 1 (flush cache) */
if (pm->pm_state == PM_EVENT_FREEZE)
- pm->pm_step = ide_pm_state_completed;
+ pm->pm_step = IDE_PM_COMPLETED;
else
- pm->pm_step = idedisk_pm_standby;
+ pm->pm_step = IDE_PM_STANDBY;
break;
- case idedisk_pm_standby: /* Suspend step 2 (standby) complete */
- pm->pm_step = ide_pm_state_completed;
+ case IDE_PM_STANDBY: /* Suspend step 2 (standby) */
+ pm->pm_step = IDE_PM_COMPLETED;
break;
- case idedisk_pm_restore_pio: /* Resume step 1 complete */
- pm->pm_step = idedisk_pm_idle;
+ case IDE_PM_RESTORE_PIO: /* Resume step 1 (restore PIO) */
+ pm->pm_step = IDE_PM_IDLE;
break;
- case idedisk_pm_idle: /* Resume step 2 (idle) complete */
- pm->pm_step = ide_pm_restore_dma;
+ case IDE_PM_IDLE: /* Resume step 2 (idle)*/
+ pm->pm_step = IDE_PM_RESTORE_DMA;
break;
}
}
@@ -180,11 +166,12 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *
memset(args, 0, sizeof(*args));

switch (pm->pm_step) {
- case ide_pm_flush_cache: /* Suspend step 1 (flush cache) */
+ case IDE_PM_FLUSH_CACHE: /* Suspend step 1 (flush cache) */
if (drive->media != ide_disk)
break;
/* Not supported? Switch to next step now. */
- if (!drive->wcache || ata_id_flush_enabled(drive->id) == 0) {
+ if (ata_id_flush_enabled(drive->id) == 0 ||
+ (drive->dev_flags & IDE_DFLAG_WCACHE) == 0) {
ide_complete_power_step(drive, rq, 0, 0);
return ide_stopped;
}
@@ -193,27 +180,23 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *
else
args->tf.command = ATA_CMD_FLUSH;
goto out_do_tf;
-
- case idedisk_pm_standby: /* Suspend step 2 (standby) */
+ case IDE_PM_STANDBY: /* Suspend step 2 (standby) */
args->tf.command = ATA_CMD_STANDBYNOW1;
goto out_do_tf;
-
- case idedisk_pm_restore_pio: /* Resume step 1 (restore PIO) */
+ case IDE_PM_RESTORE_PIO: /* Resume step 1 (restore PIO) */
ide_set_max_pio(drive);
/*
- * skip idedisk_pm_idle for ATAPI devices
+ * skip IDE_PM_IDLE for ATAPI devices
*/
if (drive->media != ide_disk)
- pm->pm_step = ide_pm_restore_dma;
+ pm->pm_step = IDE_PM_RESTORE_DMA;
else
ide_complete_power_step(drive, rq, 0, 0);
return ide_stopped;
-
- case idedisk_pm_idle: /* Resume step 2 (idle) */
+ case IDE_PM_IDLE: /* Resume step 2 (idle) */
args->tf.command = ATA_CMD_IDLEIMMEDIATE;
goto out_do_tf;
-
- case ide_pm_restore_dma: /* Resume step 3 (restore DMA) */
+ case IDE_PM_RESTORE_DMA: /* Resume step 3 (restore DMA) */
/*
* Right now, all we do is call ide_set_dma(drive),
* we could be smarter and check for current xfer_speed
@@ -222,12 +205,13 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *
if (drive->hwif->dma_ops == NULL)
break;
/*
- * TODO: respect ->using_dma setting
+ * TODO: respect IDE_DFLAG_USING_DMA
*/
ide_set_dma(drive);
break;
}
- pm->pm_step = ide_pm_state_completed;
+
+ pm->pm_step = IDE_PM_COMPLETED;
return ide_stopped;

out_do_tf:
@@ -287,7 +271,7 @@ static void ide_complete_pm_request (ide_drive_t *drive, struct request *rq)
if (blk_pm_suspend_request(rq)) {
blk_stop_queue(drive->queue);
} else {
- drive->blocked = 0;
+ drive->dev_flags &= ~IDE_DFLAG_BLOCKED;
blk_start_queue(drive->queue);
}
HWGROUP(drive)->rq = NULL;
@@ -343,7 +327,7 @@ void ide_end_drive_cmd (ide_drive_t *drive, u8 stat, u8 err)
drive->name, rq->pm->pm_step, stat, err);
#endif
ide_complete_power_step(drive, rq, stat, err);
- if (pm->pm_step == ide_pm_state_completed)
+ if (pm->pm_step == IDE_PM_COMPLETED)
ide_complete_pm_request(drive, rq);
return;
}
@@ -374,13 +358,14 @@ static ide_startstop_t ide_ata_error(ide_drive_t *drive, struct request *rq, u8
{
ide_hwif_t *hwif = drive->hwif;

- if ((stat & ATA_BUSY) || ((stat & ATA_DF) && !drive->nowerr)) {
+ if ((stat & ATA_BUSY) ||
+ ((stat & ATA_DF) && (drive->dev_flags & IDE_DFLAG_NOWERR) == 0)) {
/* other bits are useless when BUSY */
rq->errors |= ERROR_RESET;
} else if (stat & ATA_ERR) {
/* err has different meaning on cdrom and tape */
if (err == ATA_ABORTED) {
- if (drive->select.b.lba &&
+ if ((drive->dev_flags & IDE_DFLAG_LBA) &&
/* some newer drives don't support ATA_CMD_INIT_DEV_PARAMS */
hwif->tp_ops->read_status(hwif) == ATA_CMD_INIT_DEV_PARAMS)
return ide_stopped;
@@ -428,7 +413,8 @@ static ide_startstop_t ide_atapi_error(ide_drive_t *drive, struct request *rq, u
{
ide_hwif_t *hwif = drive->hwif;

- if ((stat & ATA_BUSY) || ((stat & ATA_DF) && !drive->nowerr)) {
+ if ((stat & ATA_BUSY) ||
+ ((stat & ATA_DF) && (drive->dev_flags & IDE_DFLAG_NOWERR) == 0)) {
/* other bits are useless when BUSY */
rq->errors |= ERROR_RESET;
} else {
@@ -509,7 +495,7 @@ static void ide_tf_set_specify_cmd(ide_drive_t *drive, struct ide_taskfile *tf)
tf->lbal = drive->sect;
tf->lbam = drive->cyl;
tf->lbah = drive->cyl >> 8;
- tf->device = ((drive->head - 1) | drive->select.all) & ~ATA_LBA;
+ tf->device = (drive->head - 1) | drive->select;
tf->command = ATA_CMD_INIT_DEV_PARAMS;
}

@@ -557,30 +543,6 @@ static ide_startstop_t ide_disk_special(ide_drive_t *drive)
return ide_started;
}

-/*
- * handle HDIO_SET_PIO_MODE ioctl abusers here, eventually it will go away
- */
-static int set_pio_mode_abuse(ide_hwif_t *hwif, u8 req_pio)
-{
- switch (req_pio) {
- case 202:
- case 201:
- case 200:
- case 102:
- case 101:
- case 100:
- return (hwif->host_flags & IDE_HFLAG_ABUSE_DMA_MODES) ? 1 : 0;
- case 9:
- case 8:
- return (hwif->host_flags & IDE_HFLAG_ABUSE_PREFETCH) ? 1 : 0;
- case 7:
- case 6:
- return (hwif->host_flags & IDE_HFLAG_ABUSE_FAST_DEVSEL) ? 1 : 0;
- default:
- return 0;
- }
-}
-
/**
* do_special - issue some special commands
* @drive: drive the command is for
@@ -598,45 +560,12 @@ static ide_startstop_t do_special (ide_drive_t *drive)
#ifdef DEBUG
printk("%s: do_special: 0x%02x\n", drive->name, s->all);
#endif
- if (s->b.set_tune) {
- ide_hwif_t *hwif = drive->hwif;
- const struct ide_port_ops *port_ops = hwif->port_ops;
- u8 req_pio = drive->tune_req;
-
- s->b.set_tune = 0;
-
- if (set_pio_mode_abuse(drive->hwif, req_pio)) {
- /*
- * take ide_lock for drive->[no_]unmask/[no_]io_32bit
- */
- if (req_pio == 8 || req_pio == 9) {
- unsigned long flags;
-
- spin_lock_irqsave(&ide_lock, flags);
- port_ops->set_pio_mode(drive, req_pio);
- spin_unlock_irqrestore(&ide_lock, flags);
- } else
- port_ops->set_pio_mode(drive, req_pio);
- } else {
- int keep_dma = drive->using_dma;
-
- ide_set_pio(drive, req_pio);
-
- if (hwif->host_flags & IDE_HFLAG_SET_PIO_MODE_KEEP_DMA) {
- if (keep_dma)
- ide_dma_on(drive);
- }
- }
-
- return ide_stopped;
- } else {
- if (drive->media == ide_disk)
- return ide_disk_special(drive);
+ if (drive->media == ide_disk)
+ return ide_disk_special(drive);

- s->all = 0;
- drive->mult_req = 0;
- return ide_stopped;
- }
+ s->all = 0;
+ drive->mult_req = 0;
+ return ide_stopped;
}

void ide_map_sg(ide_drive_t *drive, struct request *rq)
@@ -726,10 +655,7 @@ int ide_devset_execute(ide_drive_t *drive, const struct ide_devset *setting,
if (!(setting->flags & DS_SYNC))
return setting->set(drive, arg);

- rq = blk_get_request(q, READ, GFP_KERNEL);
- if (!rq)
- return -ENOMEM;
-
+ rq = blk_get_request(q, READ, __GFP_WAIT);
rq->cmd_type = REQ_TYPE_SPECIAL;
rq->cmd_len = 5;
rq->cmd[0] = REQ_DEVSET_EXEC;
@@ -746,7 +672,32 @@ EXPORT_SYMBOL_GPL(ide_devset_execute);

static ide_startstop_t ide_special_rq(ide_drive_t *drive, struct request *rq)
{
- switch (rq->cmd[0]) {
+ u8 cmd = rq->cmd[0];
+
+ if (cmd == REQ_PARK_HEADS || cmd == REQ_UNPARK_HEADS) {
+ ide_task_t task;
+ struct ide_taskfile *tf = &task.tf;
+
+ memset(&task, 0, sizeof(task));
+ if (cmd == REQ_PARK_HEADS) {
+ drive->sleep = *(unsigned long *)rq->special;
+ drive->dev_flags |= IDE_DFLAG_SLEEPING;
+ tf->command = ATA_CMD_IDLEIMMEDIATE;
+ tf->feature = 0x44;
+ tf->lbal = 0x4c;
+ tf->lbam = 0x4e;
+ tf->lbah = 0x55;
+ task.tf_flags |= IDE_TFLAG_CUSTOM_HANDLER;
+ } else /* cmd == REQ_UNPARK_HEADS */
+ tf->command = ATA_CMD_CHK_POWER;
+
+ task.tf_flags |= IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
+ task.rq = rq;
+ drive->hwif->data_phase = task.data_phase = TASKFILE_NO_DATA;
+ return do_rw_taskfile(drive, &task);
+ }
+
+ switch (cmd) {
case REQ_DEVSET_EXEC:
{
int err, (*setfunc)(ide_drive_t *, int) = rq->special;
@@ -773,11 +724,11 @@ static void ide_check_pm_state(ide_drive_t *drive, struct request *rq)
struct request_pm_state *pm = rq->data;

if (blk_pm_suspend_request(rq) &&
- pm->pm_step == ide_pm_state_start_suspend)
+ pm->pm_step == IDE_PM_START_SUSPEND)
/* Mark drive blocked when starting the suspend sequence. */
- drive->blocked = 1;
+ drive->dev_flags |= IDE_DFLAG_BLOCKED;
else if (blk_pm_resume_request(rq) &&
- pm->pm_step == ide_pm_state_start_resume) {
+ pm->pm_step == IDE_PM_START_RESUME) {
/*
* The first thing we do on wakeup is to wait for BSY bit to
* go away (with a looong timeout) as a drive on this hwif may
@@ -857,7 +808,7 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq)
#endif
startstop = ide_start_power_step(drive, rq);
if (startstop == ide_stopped &&
- pm->pm_step == ide_pm_state_completed)
+ pm->pm_step == IDE_PM_COMPLETED)
ide_complete_pm_request(drive, rq);
return startstop;
} else if (!rq->rq_disk && blk_special_request(rq))
@@ -895,7 +846,7 @@ void ide_stall_queue (ide_drive_t *drive, unsigned long timeout)
if (timeout > WAIT_WORSTCASE)
timeout = WAIT_WORSTCASE;
drive->sleep = timeout + jiffies;
- drive->sleeping = 1;
+ drive->dev_flags |= IDE_DFLAG_SLEEPING;
}

EXPORT_SYMBOL(ide_stall_queue);
@@ -935,18 +886,23 @@ repeat:
}

do {
- if ((!drive->sleeping || time_after_eq(jiffies, drive->sleep))
- && !elv_queue_empty(drive->queue)) {
- if (!best
- || (drive->sleeping && (!best->sleeping || time_before(drive->sleep, best->sleep)))
- || (!best->sleeping && time_before(WAKEUP(drive), WAKEUP(best))))
- {
+ u8 dev_s = !!(drive->dev_flags & IDE_DFLAG_SLEEPING);
+ u8 best_s = (best && !!(best->dev_flags & IDE_DFLAG_SLEEPING));
+
+ if ((dev_s == 0 || time_after_eq(jiffies, drive->sleep)) &&
+ !elv_queue_empty(drive->queue)) {
+ if (best == NULL ||
+ (dev_s && (best_s == 0 || time_before(drive->sleep, best->sleep))) ||
+ (best_s == 0 && time_before(WAKEUP(drive), WAKEUP(best)))) {
if (!blk_queue_plugged(drive->queue))
best = drive;
}
}
} while ((drive = drive->next) != hwgroup->drive);
- if (best && best->nice1 && !best->sleeping && best != hwgroup->drive && best->service_time > WAIT_MIN_SLEEP) {
+
+ if (best && (best->dev_flags & IDE_DFLAG_NICE1) &&
+ (best->dev_flags & IDE_DFLAG_SLEEPING) == 0 &&
+ best != hwgroup->drive && best->service_time > WAIT_MIN_SLEEP) {
long t = (signed long)(WAKEUP(best) - jiffies);
if (t >= WAIT_MIN_SLEEP) {
/*
@@ -955,7 +911,7 @@ repeat:
*/
drive = best->next;
do {
- if (!drive->sleeping
+ if ((drive->dev_flags & IDE_DFLAG_SLEEPING) == 0
&& time_before(jiffies - best->service_time, WAKEUP(drive))
&& time_before(WAKEUP(drive), jiffies + t))
{
@@ -1026,7 +982,9 @@ static void ide_do_request (ide_hwgroup_t *hwgroup, int masked_irq)
hwgroup->rq = NULL;
drive = hwgroup->drive;
do {
- if (drive->sleeping && (!sleeping || time_before(drive->sleep, sleep))) {
+ if ((drive->dev_flags & IDE_DFLAG_SLEEPING) &&
+ (sleeping == 0 ||
+ time_before(drive->sleep, sleep))) {
sleeping = 1;
sleep = drive->sleep;
}
@@ -1075,7 +1033,7 @@ static void ide_do_request (ide_hwgroup_t *hwgroup, int masked_irq)
}
hwgroup->hwif = hwif;
hwgroup->drive = drive;
- drive->sleeping = 0;
+ drive->dev_flags &= ~(IDE_DFLAG_SLEEPING | IDE_DFLAG_PARKED);
drive->service_start = jiffies;

if (blk_queue_plugged(drive->queue)) {
@@ -1109,7 +1067,9 @@ static void ide_do_request (ide_hwgroup_t *hwgroup, int masked_irq)
* We count how many times we loop here to make sure we service
* all drives in the hwgroup without looping for ever
*/
- if (drive->blocked && !blk_pm_request(rq) && !(rq->cmd_flags & REQ_PREEMPT)) {
+ if ((drive->dev_flags & IDE_DFLAG_BLOCKED) &&
+ blk_pm_request(rq) == 0 &&
+ (rq->cmd_flags & REQ_PREEMPT) == 0) {
drive = drive->next ? drive->next : hwgroup->drive;
if (loops++ < 4 && !blk_queue_plugged(drive->queue))
goto again;
@@ -1182,8 +1142,8 @@ static ide_startstop_t ide_dma_timeout_retry(ide_drive_t *drive, int error)
* a timeout -- we'll reenable after we finish this next request
* (or rather the first chunk of it) in pio.
*/
+ drive->dev_flags |= IDE_DFLAG_DMA_PIO_RETRY;
drive->retry_pio++;
- drive->state = DMA_PIO_RETRY;
ide_dma_off_quietly(drive);

/*
@@ -1480,23 +1440,16 @@ irqreturn_t ide_intr (int irq, void *dev_id)
del_timer(&hwgroup->timer);
spin_unlock(&ide_lock);

- /* Some controllers might set DMA INTR no matter DMA or PIO;
- * bmdma status might need to be cleared even for
- * PIO interrupts to prevent spurious/lost irq.
- */
- if (hwif->ide_dma_clear_irq && !(drive->waiting_for_dma))
- /* ide_dma_end() needs bmdma status for error checking.
- * So, skip clearing bmdma status here and leave it
- * to ide_dma_end() if this is dma interrupt.
- */
- hwif->ide_dma_clear_irq(drive);
+ if (hwif->port_ops && hwif->port_ops->clear_irq)
+ hwif->port_ops->clear_irq(drive);

- if (drive->unmask)
+ if (drive->dev_flags & IDE_DFLAG_UNMASK)
local_irq_enable_in_hardirq();
+
/* service this interrupt, may set handler for next interrupt */
startstop = handler(drive);
- spin_lock_irq(&ide_lock);

+ spin_lock_irq(&ide_lock);
/*
* Note that handler() may have set things up for another
* interrupt to occur soon, but it cannot happen until
diff --git a/drivers/ide/ide-ioctls.c b/drivers/ide/ide-ioctls.c
index cf01564..a90945f 100644
--- a/drivers/ide/ide-ioctls.c
+++ b/drivers/ide/ide-ioctls.c
@@ -62,7 +62,7 @@ static int ide_get_identity_ioctl(ide_drive_t *drive, unsigned int cmd,
int size = (cmd == HDIO_GET_IDENTITY) ? (ATA_ID_WORDS * 2) : 142;
int rc = 0;

- if (drive->id_read == 0) {
+ if ((drive->dev_flags & IDE_DFLAG_ID_READ) == 0) {
rc = -ENOMSG;
goto out;
}
@@ -86,8 +86,10 @@ out:

static int ide_get_nice_ioctl(ide_drive_t *drive, unsigned long arg)
{
- return put_user((drive->dsc_overlap << IDE_NICE_DSC_OVERLAP) |
- (drive->nice1 << IDE_NICE_1), (long __user *)arg);
+ return put_user((!!(drive->dev_flags & IDE_DFLAG_DSC_OVERLAP)
+ << IDE_NICE_DSC_OVERLAP) |
+ (!!(drive->dev_flags & IDE_DFLAG_NICE1)
+ << IDE_NICE_1), (long __user *)arg);
}

static int ide_set_nice_ioctl(ide_drive_t *drive, unsigned long arg)
@@ -97,11 +99,18 @@ static int ide_set_nice_ioctl(ide_drive_t *drive, unsigned long arg)

if (((arg >> IDE_NICE_DSC_OVERLAP) & 1) &&
(drive->media == ide_disk || drive->media == ide_floppy ||
- drive->scsi))
+ (drive->dev_flags & IDE_DFLAG_SCSI)))
return -EPERM;

- drive->dsc_overlap = (arg >> IDE_NICE_DSC_OVERLAP) & 1;
- drive->nice1 = (arg >> IDE_NICE_1) & 1;
+ if ((arg >> IDE_NICE_DSC_OVERLAP) & 1)
+ drive->dev_flags |= IDE_DFLAG_DSC_OVERLAP;
+ else
+ drive->dev_flags &= ~IDE_DFLAG_DSC_OVERLAP;
+
+ if ((arg >> IDE_NICE_1) & 1)
+ drive->dev_flags |= IDE_DFLAG_NICE1;
+ else
+ drive->dev_flags &= ~IDE_DFLAG_NICE1;

return 0;
}
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index 0a2fd3b..b762deb 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -181,7 +181,7 @@ void ide_tf_load(ide_drive_t *drive, ide_task_t *task)
tf_outb(tf->lbah, io_ports->lbah_addr);

if (task->tf_flags & IDE_TFLAG_OUT_DEVICE)
- tf_outb((tf->device & HIHI) | drive->select.all,
+ tf_outb((tf->device & HIHI) | drive->select,
io_ports->device_addr);
}
EXPORT_SYMBOL_GPL(ide_tf_load);
@@ -647,7 +647,7 @@ u8 eighty_ninty_three (ide_drive_t *drive)
return 1;

no_80w:
- if (drive->udma33_warned == 1)
+ if (drive->dev_flags & IDE_DFLAG_UDMA33_WARNED)
return 0;

printk(KERN_WARNING "%s: %s side 80-wire cable detection failed, "
@@ -655,7 +655,7 @@ no_80w:
drive->name,
hwif->cbl == ATA_CBL_PATA80 ? "drive" : "host");

- drive->udma33_warned = 1;
+ drive->dev_flags |= IDE_DFLAG_UDMA33_WARNED;

return 0;
}
@@ -711,7 +711,7 @@ int ide_driveid_update(ide_drive_t *drive)

kfree(id);

- if (drive->using_dma && ide_id_dma_bug(drive))
+ if ((drive->dev_flags & IDE_DFLAG_USING_DMA) && ide_id_dma_bug(drive))
ide_dma_off(drive);

return 1;
@@ -790,7 +790,7 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed)

skip:
#ifdef CONFIG_BLK_DEV_IDEDMA
- if (speed >= XFER_SW_DMA_0 && drive->using_dma)
+ if (speed >= XFER_SW_DMA_0 && (drive->dev_flags & IDE_DFLAG_USING_DMA))
hwif->dma_ops->dma_host_set(drive, 1);
else if (hwif->dma_ops) /* check if host supports DMA */
ide_dma_off_quietly(drive);
@@ -940,6 +940,25 @@ static ide_startstop_t atapi_reset_pollfunc (ide_drive_t *drive)
return ide_stopped;
}

+static void ide_reset_report_error(ide_hwif_t *hwif, u8 err)
+{
+ static const char *err_master_vals[] =
+ { NULL, "passed", "formatter device error",
+ "sector buffer error", "ECC circuitry error",
+ "controlling MPU error" };
+
+ u8 err_master = err & 0x7f;
+
+ printk(KERN_ERR "%s: reset: master: ", hwif->name);
+ if (err_master && err_master < 6)
+ printk(KERN_CONT "%s", err_master_vals[err_master]);
+ else
+ printk(KERN_CONT "error (0x%02x?)", err);
+ if (err & 0x80)
+ printk(KERN_CONT "; slave: failed");
+ printk(KERN_CONT "\n");
+}
+
/*
* reset_pollfunc() gets invoked to poll the interface for completion every 50ms
* during an ide reset operation. If the drives have not yet responded,
@@ -975,31 +994,14 @@ static ide_startstop_t reset_pollfunc (ide_drive_t *drive)
drive->failures++;
err = -EIO;
} else {
- printk("%s: reset: ", hwif->name);
tmp = ide_read_error(drive);

if (tmp == 1) {
- printk("success\n");
+ printk(KERN_INFO "%s: reset: success\n", hwif->name);
drive->failures = 0;
} else {
+ ide_reset_report_error(hwif, tmp);
drive->failures++;
- printk("master: ");
- switch (tmp & 0x7f) {
- case 1: printk("passed");
- break;
- case 2: printk("formatter device error");
- break;
- case 3: printk("sector buffer error");
- break;
- case 4: printk("ECC circuitry error");
- break;
- case 5: printk("controlling MPU error");
- break;
- default:printk("error (0x%02x?)", tmp);
- }
- if (tmp & 0x80)
- printk("; slave: failed");
- printk("\n");
err = -EIO;
}
}
@@ -1016,9 +1018,14 @@ static void ide_disk_pre_reset(ide_drive_t *drive)
drive->special.all = 0;
drive->special.b.set_geometry = legacy;
drive->special.b.recalibrate = legacy;
+
drive->mult_count = 0;
- if (!drive->keep_settings && !drive->using_dma)
+ drive->dev_flags &= ~IDE_DFLAG_PARKED;
+
+ if ((drive->dev_flags & IDE_DFLAG_KEEP_SETTINGS) == 0 &&
+ (drive->dev_flags & IDE_DFLAG_USING_DMA) == 0)
drive->mult_req = 0;
+
if (drive->mult_req != drive->mult_count)
drive->special.b.set_multmode = 1;
}
@@ -1030,18 +1037,18 @@ static void pre_reset(ide_drive_t *drive)
if (drive->media == ide_disk)
ide_disk_pre_reset(drive);
else
- drive->post_reset = 1;
+ drive->dev_flags |= IDE_DFLAG_POST_RESET;

- if (drive->using_dma) {
+ if (drive->dev_flags & IDE_DFLAG_USING_DMA) {
if (drive->crc_count)
ide_check_dma_crc(drive);
else
ide_dma_off(drive);
}

- if (!drive->keep_settings) {
- if (!drive->using_dma) {
- drive->unmask = 0;
+ if ((drive->dev_flags & IDE_DFLAG_KEEP_SETTINGS) == 0) {
+ if ((drive->dev_flags & IDE_DFLAG_USING_DMA) == 0) {
+ drive->dev_flags &= ~IDE_DFLAG_UNMASK;
drive->io_32bit = 0;
}
return;
@@ -1073,12 +1080,13 @@ static void pre_reset(ide_drive_t *drive)
static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi)
{
unsigned int unit;
- unsigned long flags;
+ unsigned long flags, timeout;
ide_hwif_t *hwif;
ide_hwgroup_t *hwgroup;
struct ide_io_ports *io_ports;
const struct ide_tp_ops *tp_ops;
const struct ide_port_ops *port_ops;
+ DEFINE_WAIT(wait);

spin_lock_irqsave(&ide_lock, flags);
hwif = HWIF(drive);
@@ -1105,6 +1113,31 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi)
return ide_started;
}

+ /* We must not disturb devices in the IDE_DFLAG_PARKED state. */
+ do {
+ unsigned long now;
+
+ prepare_to_wait(&ide_park_wq, &wait, TASK_UNINTERRUPTIBLE);
+ timeout = jiffies;
+ for (unit = 0; unit < MAX_DRIVES; unit++) {
+ ide_drive_t *tdrive = &hwif->drives[unit];
+
+ if (tdrive->dev_flags & IDE_DFLAG_PRESENT &&
+ tdrive->dev_flags & IDE_DFLAG_PARKED &&
+ time_after(tdrive->sleep, timeout))
+ timeout = tdrive->sleep;
+ }
+
+ now = jiffies;
+ if (time_before_eq(timeout, now))
+ break;
+
+ spin_unlock_irqrestore(&ide_lock, flags);
+ timeout = schedule_timeout_uninterruptible(timeout - now);
+ spin_lock_irqsave(&ide_lock, flags);
+ } while (timeout);
+ finish_wait(&ide_park_wq, &wait);
+
/*
* First, reset any device state data we were maintaining
* for any of the drives on this interface.
diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c
index ed426dd..9fc4cfb 100644
--- a/drivers/ide/ide-lib.c
+++ b/drivers/ide/ide-lib.c
@@ -317,7 +317,7 @@ static void ide_dump_sector(ide_drive_t *drive)
{
ide_task_t task;
struct ide_taskfile *tf = &task.tf;
- int lba48 = (drive->addressing == 1) ? 1 : 0;
+ u8 lba48 = !!(drive->dev_flags & IDE_DFLAG_LBA48);

memset(&task, 0, sizeof(task));
if (lba48)
diff --git a/drivers/ide/ide-park.c b/drivers/ide/ide-park.c
new file mode 100644
index 0000000..03b00e5
--- /dev/null
+++ b/drivers/ide/ide-park.c
@@ -0,0 +1,121 @@
+#include <linux/kernel.h>
+#include <linux/ide.h>
+#include <linux/jiffies.h>
+#include <linux/blkdev.h>
+
+DECLARE_WAIT_QUEUE_HEAD(ide_park_wq);
+
+static void issue_park_cmd(ide_drive_t *drive, unsigned long timeout)
+{
+ struct request_queue *q = drive->queue;
+ struct request *rq;
+ int rc;
+
+ timeout += jiffies;
+ spin_lock_irq(&ide_lock);
+ if (drive->dev_flags & IDE_DFLAG_PARKED) {
+ ide_hwgroup_t *hwgroup = drive->hwif->hwgroup;
+ int reset_timer;
+
+ reset_timer = time_before(timeout, drive->sleep);
+ drive->sleep = timeout;
+ wake_up_all(&ide_park_wq);
+ if (reset_timer && hwgroup->sleeping &&
+ del_timer(&hwgroup->timer)) {
+ hwgroup->sleeping = 0;
+ hwgroup->busy = 0;
+ blk_start_queueing(q);
+ }
+ spin_unlock_irq(&ide_lock);
+ return;
+ }
+ spin_unlock_irq(&ide_lock);
+
+ rq = blk_get_request(q, READ, __GFP_WAIT);
+ rq->cmd[0] = REQ_PARK_HEADS;
+ rq->cmd_len = 1;
+ rq->cmd_type = REQ_TYPE_SPECIAL;
+ rq->special = &timeout;
+ rc = blk_execute_rq(q, NULL, rq, 1);
+ blk_put_request(rq);
+ if (rc)
+ goto out;
+
+ /*
+ * Make sure that *some* command is sent to the drive after the
+ * timeout has expired, so power management will be reenabled.
+ */
+ rq = blk_get_request(q, READ, GFP_NOWAIT);
+ if (unlikely(!rq))
+ goto out;
+
+ rq->cmd[0] = REQ_UNPARK_HEADS;
+ rq->cmd_len = 1;
+ rq->cmd_type = REQ_TYPE_SPECIAL;
+ elv_add_request(q, rq, ELEVATOR_INSERT_FRONT, 1);
+
+out:
+ return;
+}
+
+ssize_t ide_park_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ ide_drive_t *drive = to_ide_device(dev);
+ unsigned long now;
+ unsigned int msecs;
+
+ if (drive->dev_flags & IDE_DFLAG_NO_UNLOAD)
+ return -EOPNOTSUPP;
+
+ spin_lock_irq(&ide_lock);
+ now = jiffies;
+ if (drive->dev_flags & IDE_DFLAG_PARKED &&
+ time_after(drive->sleep, now))
+ msecs = jiffies_to_msecs(drive->sleep - now);
+ else
+ msecs = 0;
+ spin_unlock_irq(&ide_lock);
+
+ return snprintf(buf, 20, "%u\n", msecs);
+}
+
+ssize_t ide_park_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+#define MAX_PARK_TIMEOUT 30000
+ ide_drive_t *drive = to_ide_device(dev);
+ long int input;
+ int rc;
+
+ rc = strict_strtol(buf, 10, &input);
+ if (rc || input < -2)
+ return -EINVAL;
+ if (input > MAX_PARK_TIMEOUT) {
+ input = MAX_PARK_TIMEOUT;
+ rc = -EOVERFLOW;
+ }
+
+ mutex_lock(&ide_setting_mtx);
+ if (input >= 0) {
+ if (drive->dev_flags & IDE_DFLAG_NO_UNLOAD)
+ rc = -EOPNOTSUPP;
+ else if (input || drive->dev_flags & IDE_DFLAG_PARKED)
+ issue_park_cmd(drive, msecs_to_jiffies(input));
+ } else {
+ if (drive->media == ide_disk)
+ switch (input) {
+ case -1:
+ drive->dev_flags &= ~IDE_DFLAG_NO_UNLOAD;
+ break;
+ case -2:
+ drive->dev_flags |= IDE_DFLAG_NO_UNLOAD;
+ break;
+ }
+ else
+ rc = -EOPNOTSUPP;
+ }
+ mutex_unlock(&ide_setting_mtx);
+
+ return rc ? rc : len;
+}
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 06575a1..f27baa5 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -121,7 +121,8 @@ static inline void do_identify (ide_drive_t *drive, u8 cmd)
/* read 512 bytes of id info */
hwif->tp_ops->input_data(drive, NULL, id, SECTOR_SIZE);

- drive->id_read = 1;
+ drive->dev_flags |= IDE_DFLAG_ID_READ;
+
local_irq_enable();
#ifdef DEBUG
printk(KERN_INFO "%s: dumping identify data\n", drive->name);
@@ -153,8 +154,8 @@ static inline void do_identify (ide_drive_t *drive, u8 cmd)

printk(KERN_INFO "%s: %s, ", drive->name, m);

- drive->present = 1;
- drive->dead = 0;
+ drive->dev_flags |= IDE_DFLAG_PRESENT;
+ drive->dev_flags &= ~IDE_DFLAG_DEAD;

/*
* Check for an ATAPI device
@@ -172,14 +173,14 @@ static inline void do_identify (ide_drive_t *drive, u8 cmd)
printk(KERN_CONT "cdrom or floppy?, assuming ");
if (drive->media != ide_cdrom) {
printk(KERN_CONT "FLOPPY");
- drive->removable = 1;
+ drive->dev_flags |= IDE_DFLAG_REMOVABLE;
break;
}
}
/* Early cdrom models used zero */
type = ide_cdrom;
case ide_cdrom:
- drive->removable = 1;
+ drive->dev_flags |= IDE_DFLAG_REMOVABLE;
#ifdef CONFIG_PPC
/* kludge for Apple PowerBook internal zip */
if (!strstr(m, "CD-ROM") && strstr(m, "ZIP")) {
@@ -195,7 +196,7 @@ static inline void do_identify (ide_drive_t *drive, u8 cmd)
break;
case ide_optical:
printk(KERN_CONT "OPTICAL");
- drive->removable = 1;
+ drive->dev_flags |= IDE_DFLAG_REMOVABLE;
break;
default:
printk(KERN_CONT "UNKNOWN (type %d)", type);
@@ -205,6 +206,10 @@ static inline void do_identify (ide_drive_t *drive, u8 cmd)
drive->media = type;
/* an ATAPI device ignores DRDY */
drive->ready_stat = 0;
+ if (ata_id_cdb_intr(id))
+ drive->atapi_flags |= IDE_AFLAG_DRQ_INTERRUPT;
+ /* we don't do head unloading on ATAPI devices */
+ drive->dev_flags |= IDE_DFLAG_NO_UNLOAD;
return;
}

@@ -216,17 +221,20 @@ static inline void do_identify (ide_drive_t *drive, u8 cmd)

/* CF devices are *not* removable in Linux definition of the term */
if (is_cfa == 0 && (id[ATA_ID_CONFIG] & (1 << 7)))
- drive->removable = 1;
+ drive->dev_flags |= IDE_DFLAG_REMOVABLE;

drive->media = ide_disk;

+ if (!ata_id_has_unload(drive->id))
+ drive->dev_flags |= IDE_DFLAG_NO_UNLOAD;
+
printk(KERN_CONT "%s DISK drive\n", is_cfa ? "CFA" : "ATA");

return;

err_misc:
kfree(id);
- drive->present = 0;
+ drive->dev_flags &= ~IDE_DFLAG_PRESENT;
return;
}

@@ -426,16 +434,15 @@ static int do_probe (ide_drive_t *drive, u8 cmd)
ide_hwif_t *hwif = HWIF(drive);
const struct ide_tp_ops *tp_ops = hwif->tp_ops;
int rc;
- u8 stat;
+ u8 present = !!(drive->dev_flags & IDE_DFLAG_PRESENT), stat;
+
+ /* avoid waiting for inappropriate probes */
+ if (present && drive->media != ide_disk && cmd == ATA_CMD_ID_ATA)
+ return 4;

- if (drive->present) {
- /* avoid waiting for inappropriate probes */
- if (drive->media != ide_disk && cmd == ATA_CMD_ID_ATA)
- return 4;
- }
#ifdef DEBUG
printk(KERN_INFO "probing for %s: present=%d, media=%d, probetype=%s\n",
- drive->name, drive->present, drive->media,
+ drive->name, present, drive->media,
(cmd == ATA_CMD_ID_ATA) ? "ATA" : "ATAPI");
#endif

@@ -446,8 +453,8 @@ static int do_probe (ide_drive_t *drive, u8 cmd)
SELECT_DRIVE(drive);
msleep(50);

- if (ide_read_device(drive) != drive->select.all && !drive->present) {
- if (drive->select.b.unit != 0) {
+ if (ide_read_device(drive) != drive->select && present == 0) {
+ if (drive->dn & 1) {
/* exit with drive0 selected */
SELECT_DRIVE(&hwif->drives[0]);
/* allow ATA_BUSY to assert & clear */
@@ -460,7 +467,7 @@ static int do_probe (ide_drive_t *drive, u8 cmd)
stat = tp_ops->read_status(hwif);

if (OK_STAT(stat, ATA_DRDY, ATA_BUSY) ||
- drive->present || cmd == ATA_CMD_ID_ATAPI) {
+ present || cmd == ATA_CMD_ID_ATAPI) {
/* send cmd and wait */
if ((rc = try_to_identify(drive, cmd))) {
/* failed: try again */
@@ -493,7 +500,7 @@ static int do_probe (ide_drive_t *drive, u8 cmd)
/* not present or maybe ATAPI */
rc = 3;
}
- if (drive->select.b.unit != 0) {
+ if (drive->dn & 1) {
/* exit with drive0 selected */
SELECT_DRIVE(&hwif->drives[0]);
msleep(50);
@@ -542,8 +549,8 @@ static void enable_nest (ide_drive_t *drive)
* and presents things to the user as needed.
*
* Returns: 0 no device was found
- * 1 device was found (note: drive->present might
- * still be 0)
+ * 1 device was found
+ * (note: IDE_DFLAG_PRESENT might still be not set)
*/

static inline u8 probe_for_drive (ide_drive_t *drive)
@@ -559,10 +566,10 @@ static inline u8 probe_for_drive (ide_drive_t *drive)
* Also note that 0 everywhere means "can't do X"
*/

+ drive->dev_flags &= ~IDE_DFLAG_ID_READ;
+
drive->id = kzalloc(SECTOR_SIZE, GFP_KERNEL);
- drive->id_read = 0;
- if(drive->id == NULL)
- {
+ if (drive->id == NULL) {
printk(KERN_ERR "ide: out of memory for id data.\n");
return 0;
}
@@ -571,14 +578,14 @@ static inline u8 probe_for_drive (ide_drive_t *drive)
strcpy(m, "UNKNOWN");

/* skip probing? */
- if (!drive->noprobe) {
+ if ((drive->dev_flags & IDE_DFLAG_NOPROBE) == 0) {
retry:
/* if !(success||timed-out) */
if (do_probe(drive, ATA_CMD_ID_ATA) >= 2)
/* look for ATAPI device */
(void)do_probe(drive, ATA_CMD_ID_ATAPI);

- if (!drive->present)
+ if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0)
/* drive not found */
return 0;

@@ -588,7 +595,7 @@ retry:
}

/* identification failed? */
- if (!drive->id_read) {
+ if ((drive->dev_flags & IDE_DFLAG_ID_READ) == 0) {
if (drive->media == ide_disk) {
printk(KERN_INFO "%s: non-IDE drive, CHS=%d/%d/%d\n",
drive->name, drive->cyl,
@@ -598,15 +605,17 @@ retry:
} else {
/* nuke it */
printk(KERN_WARNING "%s: Unknown device on bus refused identification. Ignoring.\n", drive->name);
- drive->present = 0;
+ drive->dev_flags &= ~IDE_DFLAG_PRESENT;
}
}
/* drive was found */
}
- if(!drive->present)
+
+ if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0)
return 0;
+
/* The drive wasn't being helpful. Add generic info only */
- if (drive->id_read == 0) {
+ if ((drive->dev_flags & IDE_DFLAG_ID_READ) == 0) {
generic_id(drive);
return 1;
}
@@ -616,7 +625,7 @@ retry:
ide_disk_init_mult_count(drive);
}

- return drive->present;
+ return !!(drive->dev_flags & IDE_DFLAG_PRESENT);
}

static void hwif_release_dev(struct device *dev)
@@ -707,7 +716,8 @@ static int ide_port_wait_ready(ide_hwif_t *hwif)
ide_drive_t *drive = &hwif->drives[unit];

/* Ignore disks that we will not probe for later. */
- if (!drive->noprobe || drive->present) {
+ if ((drive->dev_flags & IDE_DFLAG_NOPROBE) == 0 ||
+ (drive->dev_flags & IDE_DFLAG_PRESENT)) {
SELECT_DRIVE(drive);
hwif->tp_ops->set_irq(hwif, 1);
mdelay(2);
@@ -739,7 +749,7 @@ void ide_undecoded_slave(ide_drive_t *dev1)
{
ide_drive_t *dev0 = &dev1->hwif->drives[0];

- if ((dev1->dn & 1) == 0 || dev0->present == 0)
+ if ((dev1->dn & 1) == 0 || (dev0->dev_flags & IDE_DFLAG_PRESENT) == 0)
return;

/* If the models don't match they are not the same product */
@@ -759,7 +769,7 @@ void ide_undecoded_slave(ide_drive_t *dev1)
/* Appears to be an IDE flash adapter with decode bugs */
printk(KERN_WARNING "ide-probe: ignoring undecoded slave\n");

- dev1->present = 0;
+ dev1->dev_flags &= ~IDE_DFLAG_PRESENT;
}

EXPORT_SYMBOL_GPL(ide_undecoded_slave);
@@ -772,7 +782,8 @@ static int ide_probe_port(ide_hwif_t *hwif)

BUG_ON(hwif->present);

- if (hwif->drives[0].noprobe && hwif->drives[1].noprobe)
+ if ((hwif->drives[0].dev_flags & IDE_DFLAG_NOPROBE) &&
+ (hwif->drives[1].dev_flags & IDE_DFLAG_NOPROBE))
return -EACCES;

/*
@@ -794,9 +805,9 @@ static int ide_probe_port(ide_hwif_t *hwif)
*/
for (unit = 0; unit < MAX_DRIVES; ++unit) {
ide_drive_t *drive = &hwif->drives[unit];
- drive->dn = (hwif->channel ? 2 : 0) + unit;
+
(void) probe_for_drive(drive);
- if (drive->present)
+ if (drive->dev_flags & IDE_DFLAG_PRESENT)
rc = 0;
}

@@ -820,17 +831,19 @@ static void ide_port_tune_devices(ide_hwif_t *hwif)
for (unit = 0; unit < MAX_DRIVES; unit++) {
ide_drive_t *drive = &hwif->drives[unit];

- if (drive->present && port_ops && port_ops->quirkproc)
- port_ops->quirkproc(drive);
+ if (drive->dev_flags & IDE_DFLAG_PRESENT) {
+ if (port_ops && port_ops->quirkproc)
+ port_ops->quirkproc(drive);
+ }
}

for (unit = 0; unit < MAX_DRIVES; ++unit) {
ide_drive_t *drive = &hwif->drives[unit];

- if (drive->present) {
+ if (drive->dev_flags & IDE_DFLAG_PRESENT) {
ide_set_max_pio(drive);

- drive->nice1 = 1;
+ drive->dev_flags |= IDE_DFLAG_NICE1;

if (hwif->dma_ops)
ide_set_dma(drive);
@@ -840,14 +853,14 @@ static void ide_port_tune_devices(ide_hwif_t *hwif)
for (unit = 0; unit < MAX_DRIVES; ++unit) {
ide_drive_t *drive = &hwif->drives[unit];

- if (hwif->host_flags & IDE_HFLAG_NO_IO_32BIT)
- drive->no_io_32bit = 1;
+ if ((hwif->host_flags & IDE_HFLAG_NO_IO_32BIT) ||
+ drive->id[ATA_ID_DWORD_IO])
+ drive->dev_flags |= IDE_DFLAG_NO_IO_32BIT;
else
- drive->no_io_32bit = drive->id[ATA_ID_DWORD_IO] ? 1 : 0;
+ drive->dev_flags &= ~IDE_DFLAG_NO_IO_32BIT;
}
}

-#if MAX_HWIFS > 1
/*
* save_match() is used to simplify logic in init_irq() below.
*
@@ -872,7 +885,6 @@ static void save_match(ide_hwif_t *hwif, ide_hwif_t *new, ide_hwif_t **match)
if (!m || m->irq != hwif->irq) /* don't undo a prior perfect match */
*match = new;
}
-#endif /* MAX_HWIFS > 1 */

/*
* init request queue
@@ -951,26 +963,33 @@ static void ide_add_drive_to_hwgroup(ide_drive_t *drive)
* - allocate the block device queue
* - link drive into the hwgroup
*/
-static void ide_port_setup_devices(ide_hwif_t *hwif)
+static int ide_port_setup_devices(ide_hwif_t *hwif)
{
- int i;
+ int i, j = 0;

mutex_lock(&ide_cfg_mtx);
for (i = 0; i < MAX_DRIVES; i++) {
ide_drive_t *drive = &hwif->drives[i];

- if (!drive->present)
+ if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0)
continue;

if (ide_init_queue(drive)) {
printk(KERN_ERR "ide: failed to init %s\n",
drive->name);
+ kfree(drive->id);
+ drive->id = NULL;
+ drive->dev_flags &= ~IDE_DFLAG_PRESENT;
continue;
}

+ j++;
+
ide_add_drive_to_hwgroup(drive);
}
mutex_unlock(&ide_cfg_mtx);
+
+ return j;
}

static ide_hwif_t *ide_ports[MAX_HWIFS];
@@ -1029,7 +1048,7 @@ static int init_irq (ide_hwif_t *hwif)

mutex_lock(&ide_cfg_mtx);
hwif->hwgroup = NULL;
-#if MAX_HWIFS > 1
+
/*
* Group up with any other hwifs that share our irq(s).
*/
@@ -1054,7 +1073,7 @@ static int init_irq (ide_hwif_t *hwif)
}
}
}
-#endif /* MAX_HWIFS > 1 */
+
/*
* If we are still without a hwgroup, then form a new one
*/
@@ -1153,12 +1172,13 @@ static struct kobject *ata_probe(dev_t dev, int *part, void *data)
ide_hwif_t *hwif = data;
int unit = *part >> PARTN_BITS;
ide_drive_t *drive = &hwif->drives[unit];
- if (!drive->present)
+
+ if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0)
return NULL;

if (drive->media == ide_disk)
request_module("ide-disk");
- if (drive->scsi)
+ if (drive->dev_flags & IDE_DFLAG_SCSI)
request_module("ide-scsi");
if (drive->media == ide_cdrom || drive->media == ide_optical)
request_module("ide-cd");
@@ -1205,7 +1225,7 @@ EXPORT_SYMBOL_GPL(ide_unregister_region);
void ide_init_disk(struct gendisk *disk, ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
- unsigned int unit = (drive->select.all >> 4) & 1;
+ unsigned int unit = drive->dn & 1;

disk->major = hwif->major;
disk->first_minor = unit << PARTN_BITS;
@@ -1248,7 +1268,7 @@ static void drive_release_dev (struct device *dev)
ide_remove_drive_from_hwgroup(drive);
kfree(drive->id);
drive->id = NULL;
- drive->present = 0;
+ drive->dev_flags &= ~IDE_DFLAG_PRESENT;
/* Messed up locking ... */
spin_unlock_irq(&ide_lock);
blk_cleanup_queue(drive->queue);
@@ -1327,7 +1347,7 @@ static void hwif_register_devices(ide_hwif_t *hwif)
struct device *dev = &drive->gendev;
int ret;

- if (!drive->present)
+ if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0)
continue;

snprintf(dev->bus_id, BUS_ID_SIZE, "%u.%u", hwif->index, i);
@@ -1351,12 +1371,14 @@ static void ide_port_init_devices(ide_hwif_t *hwif)
for (i = 0; i < MAX_DRIVES; i++) {
ide_drive_t *drive = &hwif->drives[i];

+ drive->dn = i + hwif->channel * 2;
+
if (hwif->host_flags & IDE_HFLAG_IO_32BIT)
drive->io_32bit = 1;
if (hwif->host_flags & IDE_HFLAG_UNMASK_IRQS)
- drive->unmask = 1;
+ drive->dev_flags |= IDE_DFLAG_UNMASK;
if (hwif->host_flags & IDE_HFLAG_NO_UNMASK_IRQS)
- drive->no_unmask = 1;
+ drive->dev_flags |= IDE_DFLAG_NO_UNMASK;

if (port_ops && port_ops->init_dev)
port_ops->init_dev(drive);
@@ -1513,19 +1535,14 @@ static int ide_find_port_slot(const struct ide_port_info *d)
* ports 0x1f0/0x170 (the ide0/ide1 defaults).
*/
mutex_lock(&ide_cfg_mtx);
- if (MAX_HWIFS == 1) {
- if (ide_indexes == 0 && i == 0)
- idx = 1;
+ if (bootable) {
+ if ((ide_indexes | i) != (1 << MAX_HWIFS) - 1)
+ idx = ffz(ide_indexes | i);
} else {
- if (bootable) {
- if ((ide_indexes | i) != (1 << MAX_HWIFS) - 1)
- idx = ffz(ide_indexes | i);
- } else {
- if ((ide_indexes | 3) != (1 << MAX_HWIFS) - 1)
- idx = ffz(ide_indexes | 3);
- else if ((ide_indexes & 3) != 3)
- idx = ffz(ide_indexes);
- }
+ if ((ide_indexes | 3) != (1 << MAX_HWIFS) - 1)
+ idx = ffz(ide_indexes | 3);
+ else if ((ide_indexes & 3) != 3)
+ idx = ffz(ide_indexes);
}
if (idx >= 0)
ide_indexes |= (1 << idx);
@@ -1541,8 +1558,7 @@ static void ide_free_port_slot(int idx)
mutex_unlock(&ide_cfg_mtx);
}

-struct ide_host *ide_host_alloc_all(const struct ide_port_info *d,
- hw_regs_t **hws)
+struct ide_host *ide_host_alloc(const struct ide_port_info *d, hw_regs_t **hws)
{
struct ide_host *host;
int i;
@@ -1551,7 +1567,7 @@ struct ide_host *ide_host_alloc_all(const struct ide_port_info *d,
if (host == NULL)
return NULL;

- for (i = 0; i < MAX_HWIFS; i++) {
+ for (i = 0; i < MAX_HOST_PORTS; i++) {
ide_hwif_t *hwif;
int idx;

@@ -1593,18 +1609,6 @@ struct ide_host *ide_host_alloc_all(const struct ide_port_info *d,

return host;
}
-EXPORT_SYMBOL_GPL(ide_host_alloc_all);
-
-struct ide_host *ide_host_alloc(const struct ide_port_info *d, hw_regs_t **hws)
-{
- hw_regs_t *hws_all[MAX_HWIFS];
- int i;
-
- for (i = 0; i < MAX_HWIFS; i++)
- hws_all[i] = (i < 4) ? hws[i] : NULL;
-
- return ide_host_alloc_all(d, hws_all);
-}
EXPORT_SYMBOL_GPL(ide_host_alloc);

int ide_host_register(struct ide_host *host, const struct ide_port_info *d,
@@ -1613,7 +1617,7 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d,
ide_hwif_t *hwif, *mate = NULL;
int i, j = 0;

- for (i = 0; i < MAX_HWIFS; i++) {
+ for (i = 0; i < MAX_HOST_PORTS; i++) {
hwif = host->ports[i];

if (hwif == NULL) {
@@ -1626,22 +1630,22 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d,

if (d == NULL) {
mate = NULL;
- continue;
- }
+ } else {
+ if ((i & 1) && mate) {
+ hwif->mate = mate;
+ mate->mate = hwif;
+ }

- if ((i & 1) && mate) {
- hwif->mate = mate;
- mate->mate = hwif;
- }
+ mate = (i & 1) ? NULL : hwif;

- mate = (i & 1) ? NULL : hwif;
+ ide_init_port(hwif, i & 1, d);
+ ide_port_cable_detect(hwif);
+ }

- ide_init_port(hwif, i & 1, d);
- ide_port_cable_detect(hwif);
ide_port_init_devices(hwif);
}

- for (i = 0; i < MAX_HWIFS; i++) {
+ for (i = 0; i < MAX_HOST_PORTS; i++) {
hwif = host->ports[i];

if (hwif == NULL)
@@ -1658,7 +1662,7 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d,
ide_port_tune_devices(hwif);
}

- for (i = 0; i < MAX_HWIFS; i++) {
+ for (i = 0; i < MAX_HOST_PORTS; i++) {
hwif = host->ports[i];

if (hwif == NULL)
@@ -1671,10 +1675,13 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d,
continue;
}

- j++;
-
if (hwif->present)
- ide_port_setup_devices(hwif);
+ if (ide_port_setup_devices(hwif) == 0) {
+ hwif->present = 0;
+ continue;
+ }
+
+ j++;

ide_acpi_init(hwif);

@@ -1682,7 +1689,7 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d,
ide_acpi_port_init_devices(hwif);
}

- for (i = 0; i < MAX_HWIFS; i++) {
+ for (i = 0; i < MAX_HOST_PORTS; i++) {
hwif = host->ports[i];

if (hwif == NULL)
@@ -1695,7 +1702,7 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d,
hwif_register_devices(hwif);
}

- for (i = 0; i < MAX_HWIFS; i++) {
+ for (i = 0; i < MAX_HOST_PORTS; i++) {
hwif = host->ports[i];

if (hwif == NULL)
@@ -1740,7 +1747,7 @@ void ide_host_free(struct ide_host *host)
ide_hwif_t *hwif;
int i;

- for (i = 0; i < MAX_HWIFS; i++) {
+ for (i = 0; i < MAX_HOST_PORTS; i++) {
hwif = host->ports[i];

if (hwif == NULL)
@@ -1758,7 +1765,7 @@ void ide_host_remove(struct ide_host *host)
{
int i;

- for (i = 0; i < MAX_HWIFS; i++) {
+ for (i = 0; i < MAX_HOST_PORTS; i++) {
if (host->ports[i])
ide_unregister(host->ports[i]);
}
diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c
index e7030a4..b269264 100644
--- a/drivers/ide/ide-proc.c
+++ b/drivers/ide/ide-proc.c
@@ -227,7 +227,7 @@ static int set_xfer_rate (ide_drive_t *drive, int arg)

ide_devset_rw(current_speed, xfer_rate);
ide_devset_rw_field(init_speed, init_speed);
-ide_devset_rw_field(nice1, nice1);
+ide_devset_rw_flag(nice1, IDE_DFLAG_NICE1);
ide_devset_rw_field(number, dn);

static const struct ide_proc_devset ide_generic_settings[] = {
@@ -622,9 +622,7 @@ void ide_proc_port_register_devices(ide_hwif_t *hwif)
for (d = 0; d < MAX_DRIVES; d++) {
ide_drive_t *drive = &hwif->drives[d];

- if (!drive->present)
- continue;
- if (drive->proc)
+ if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0 || drive->proc)
continue;

drive->proc = proc_mkdir(drive->name, parent);
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index f8c84df..25ac60f 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -172,23 +172,16 @@ typedef struct ide_tape_obj {
struct kref kref;

/*
- * pc points to the current processed packet command.
- *
* failed_pc points to the last failed packet command, or contains
* NULL if we do not need to retry any packet command. This is
* required since an additional packet command is needed before the
* retry, to get detailed information on what went wrong.
*/
- /* Current packet command */
- struct ide_atapi_pc *pc;
/* Last failed packet command */
struct ide_atapi_pc *failed_pc;
/* used by REQ_IDETAPE_{READ,WRITE} requests */
struct ide_atapi_pc queued_pc;

- struct ide_atapi_pc request_sense_pc;
- struct request request_sense_rq;
-
/*
* DSC polling variables.
*
@@ -274,11 +267,6 @@ static DEFINE_MUTEX(idetape_ref_mutex);

static struct class *idetape_sysfs_class;

-#define to_ide_tape(obj) container_of(obj, struct ide_tape_obj, kref)
-
-#define ide_tape_g(disk) \
- container_of((disk)->private_data, struct ide_tape_obj, driver)
-
static void ide_tape_release(struct kref *);

static struct ide_tape_obj *ide_tape_get(struct gendisk *disk)
@@ -286,7 +274,7 @@ static struct ide_tape_obj *ide_tape_get(struct gendisk *disk)
struct ide_tape_obj *tape = NULL;

mutex_lock(&idetape_ref_mutex);
- tape = ide_tape_g(disk);
+ tape = ide_drv_g(disk, ide_tape_obj);
if (tape) {
if (ide_device_get(tape->drive))
tape = NULL;
@@ -313,8 +301,6 @@ static void ide_tape_put(struct ide_tape_obj *tape)
*/
static struct ide_tape_obj *idetape_devs[MAX_HWIFS * MAX_DRIVES];

-#define ide_tape_f(file) ((file)->private_data)
-
static struct ide_tape_obj *ide_tape_chrdev_get(unsigned int i)
{
struct ide_tape_obj *tape = NULL;
@@ -522,14 +508,19 @@ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects)
return 0;
}

-static void ide_tape_callback(ide_drive_t *drive)
+static void ide_tape_handle_dsc(ide_drive_t *);
+
+static void ide_tape_callback(ide_drive_t *drive, int dsc)
{
idetape_tape_t *tape = drive->driver_data;
- struct ide_atapi_pc *pc = tape->pc;
+ struct ide_atapi_pc *pc = drive->pc;
int uptodate = pc->error ? 0 : 1;

debug_log(DBG_PROCS, "Enter %s\n", __func__);

+ if (dsc)
+ ide_tape_handle_dsc(drive);
+
if (tape->failed_pc == pc)
tape->failed_pc = NULL;

@@ -558,7 +549,7 @@ static void ide_tape_callback(ide_drive_t *drive)
if (pc->error)
uptodate = pc->error;
} else if (pc->c[0] == READ_POSITION && uptodate) {
- u8 *readpos = tape->pc->buf;
+ u8 *readpos = pc->buf;

debug_log(DBG_SENSE, "BOP - %s\n",
(readpos[0] & 0x80) ? "Yes" : "No");
@@ -583,31 +574,6 @@ static void ide_tape_callback(ide_drive_t *drive)
idetape_end_request(drive, uptodate, 0);
}

-static void idetape_create_request_sense_cmd(struct ide_atapi_pc *pc)
-{
- ide_init_pc(pc);
- pc->c[0] = REQUEST_SENSE;
- pc->c[4] = 20;
- pc->req_xfer = 20;
-}
-
-/*
- * idetape_retry_pc is called when an error was detected during the
- * last packet command. We queue a request sense packet command in
- * the head of the request list.
- */
-static void idetape_retry_pc(ide_drive_t *drive)
-{
- struct ide_tape_obj *tape = drive->driver_data;
- struct request *rq = &tape->request_sense_rq;
- struct ide_atapi_pc *pc = &tape->request_sense_pc;
-
- (void)ide_read_error(drive);
- idetape_create_request_sense_cmd(pc);
- set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags);
- ide_queue_pc_head(drive, tape->disk, pc, rq);
-}
-
/*
* Postpone the current request so that ide.c will be able to service requests
* from another device on the same hwgroup while we are polling for DSC.
@@ -646,34 +612,18 @@ static int ide_tape_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
}

/*
- * This is the usual interrupt handler which will be called during a packet
- * command. We will transfer some of the data (as requested by the drive) and
- * will re-point interrupt handler to us. When data transfer is finished, we
- * will act according to the algorithm described before
- * idetape_issue_pc.
- */
-static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
-{
- idetape_tape_t *tape = drive->driver_data;
-
- return ide_pc_intr(drive, tape->pc, idetape_pc_intr, WAIT_TAPE_CMD,
- NULL, idetape_update_buffers, idetape_retry_pc,
- ide_tape_handle_dsc, ide_tape_io_buffers);
-}
-
-/*
* Packet Command Interface
*
- * The current Packet Command is available in tape->pc, and will not change
+ * The current Packet Command is available in drive->pc, and will not change
* until we finish handling it. Each packet command is associated with a
* callback function that will be called when the command is finished.
*
* The handling will be done in three stages:
*
* 1. idetape_issue_pc will send the packet command to the drive, and will set
- * the interrupt handler to idetape_pc_intr.
+ * the interrupt handler to ide_pc_intr.
*
- * 2. On each interrupt, idetape_pc_intr will be called. This step will be
+ * 2. On each interrupt, ide_pc_intr will be called. This step will be
* repeated until the device signals us that no more interrupts will be issued.
*
* 3. ATAPI Tape media access commands have immediate status with a delayed
@@ -697,20 +647,13 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
* again, the callback function will be called and then we will handle the next
* request.
*/
-static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive)
-{
- idetape_tape_t *tape = drive->driver_data;
-
- return ide_transfer_pc(drive, tape->pc, idetape_pc_intr,
- WAIT_TAPE_CMD, NULL);
-}

static ide_startstop_t idetape_issue_pc(ide_drive_t *drive,
struct ide_atapi_pc *pc)
{
idetape_tape_t *tape = drive->driver_data;

- if (tape->pc->c[0] == REQUEST_SENSE &&
+ if (drive->pc->c[0] == REQUEST_SENSE &&
pc->c[0] == REQUEST_SENSE) {
printk(KERN_ERR "ide-tape: possible ide-tape.c bug - "
"Two request sense in serial were issued\n");
@@ -718,8 +661,9 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive,

if (tape->failed_pc == NULL && pc->c[0] != REQUEST_SENSE)
tape->failed_pc = pc;
+
/* Set the current packet command */
- tape->pc = pc;
+ drive->pc = pc;

if (pc->retries > IDETAPE_MAX_PC_RETRIES ||
(pc->flags & PC_FLAG_ABORT)) {
@@ -743,15 +687,14 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive,
pc->error = IDETAPE_ERROR_GENERAL;
}
tape->failed_pc = NULL;
- drive->pc_callback(drive);
+ drive->pc_callback(drive, 0);
return ide_stopped;
}
debug_log(DBG_SENSE, "Retry #%d, cmd = %02X\n", pc->retries, pc->c[0]);

pc->retries++;

- return ide_issue_pc(drive, pc, idetape_transfer_pc,
- WAIT_TAPE_CMD, NULL);
+ return ide_issue_pc(drive, WAIT_TAPE_CMD, NULL);
}

/* A mode sense command is used to "sense" tape parameters. */
@@ -785,7 +728,7 @@ static ide_startstop_t idetape_media_access_finished(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
idetape_tape_t *tape = drive->driver_data;
- struct ide_atapi_pc *pc = tape->pc;
+ struct ide_atapi_pc *pc = drive->pc;
u8 stat;

stat = hwif->tp_ops->read_status(hwif);
@@ -797,7 +740,7 @@ static ide_startstop_t idetape_media_access_finished(ide_drive_t *drive)
printk(KERN_ERR "ide-tape: %s: I/O error, ",
tape->name);
/* Retry operation */
- idetape_retry_pc(drive);
+ ide_retry_pc(drive, tape->disk);
return ide_stopped;
}
pc->error = 0;
@@ -805,7 +748,7 @@ static ide_startstop_t idetape_media_access_finished(ide_drive_t *drive)
pc->error = IDETAPE_ERROR_GENERAL;
tape->failed_pc = NULL;
}
- drive->pc_callback(drive);
+ drive->pc_callback(drive, 0);
return ide_stopped;
}

@@ -862,7 +805,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
}

/* Retry a failed packet command */
- if (tape->failed_pc && tape->pc->c[0] == REQUEST_SENSE) {
+ if (tape->failed_pc && drive->pc->c[0] == REQUEST_SENSE) {
pc = tape->failed_pc;
goto out;
}
@@ -883,12 +826,13 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
*/
stat = hwif->tp_ops->read_status(hwif);

- if (!drive->dsc_overlap && !(rq->cmd[13] & REQ_IDETAPE_PC2))
+ if ((drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) == 0 &&
+ (rq->cmd[13] & REQ_IDETAPE_PC2) == 0)
set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags);

- if (drive->post_reset == 1) {
+ if (drive->dev_flags & IDE_DFLAG_POST_RESET) {
set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags);
- drive->post_reset = 0;
+ drive->dev_flags &= ~IDE_DFLAG_POST_RESET;
}

if (!test_and_clear_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags) &&
@@ -1411,7 +1355,7 @@ static int idetape_init_read(ide_drive_t *drive)
* No point in issuing this if DSC overlap isn't supported, some
* drives (Seagate STT3401A) will return an error.
*/
- if (drive->dsc_overlap) {
+ if (drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) {
bytes_read = idetape_queue_rw_tail(drive,
REQ_IDETAPE_READ, 0,
tape->merge_bh);
@@ -1592,7 +1536,7 @@ static int idetape_space_over_filemarks(ide_drive_t *drive, short mt_op,
static ssize_t idetape_chrdev_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
- struct ide_tape_obj *tape = ide_tape_f(file);
+ struct ide_tape_obj *tape = file->private_data;
ide_drive_t *drive = tape->drive;
ssize_t bytes_read, temp, actually_read = 0, rc;
ssize_t ret = 0;
@@ -1654,7 +1598,7 @@ finish:
static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
- struct ide_tape_obj *tape = ide_tape_f(file);
+ struct ide_tape_obj *tape = file->private_data;
ide_drive_t *drive = tape->drive;
ssize_t actually_written = 0;
ssize_t ret = 0;
@@ -1687,7 +1631,7 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf,
* point in issuing this if DSC overlap isn't supported, some
* drives (Seagate STT3401A) will return an error.
*/
- if (drive->dsc_overlap) {
+ if (drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) {
ssize_t retval = idetape_queue_rw_tail(drive,
REQ_IDETAPE_WRITE, 0,
tape->merge_bh);
@@ -1886,7 +1830,7 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count)
static int idetape_chrdev_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
- struct ide_tape_obj *tape = ide_tape_f(file);
+ struct ide_tape_obj *tape = file->private_data;
ide_drive_t *drive = tape->drive;
struct mtop mtop;
struct mtget mtget;
@@ -2063,7 +2007,7 @@ static void idetape_write_release(ide_drive_t *drive, unsigned int minor)

static int idetape_chrdev_release(struct inode *inode, struct file *filp)
{
- struct ide_tape_obj *tape = ide_tape_f(filp);
+ struct ide_tape_obj *tape = filp->private_data;
ide_drive_t *drive = tape->drive;
unsigned int minor = iminor(inode);

@@ -2202,7 +2146,7 @@ static int divf_tdsc(ide_drive_t *drive) { return HZ; }
static int divf_buffer(ide_drive_t *drive) { return 2; }
static int divf_buffer_size(ide_drive_t *drive) { return 1024; }

-ide_devset_rw_field(dsc_overlap, dsc_overlap);
+ide_devset_rw_flag(dsc_overlap, IDE_DFLAG_DSC_OVERLAP);

ide_tape_devset_rw_field(debug_mask, debug_mask);
ide_tape_devset_rw_field(tdsc, best_dsc_rw_freq);
@@ -2241,33 +2185,32 @@ static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor)
unsigned long t;
int speed;
int buffer_size;
- u8 gcw[2];
u16 *ctl = (u16 *)&tape->caps[12];

- drive->pc_callback = ide_tape_callback;
+ drive->pc_callback = ide_tape_callback;
+ drive->pc_update_buffers = idetape_update_buffers;
+ drive->pc_io_buffers = ide_tape_io_buffers;

spin_lock_init(&tape->lock);
- drive->dsc_overlap = 1;
+
+ drive->dev_flags |= IDE_DFLAG_DSC_OVERLAP;
+
if (drive->hwif->host_flags & IDE_HFLAG_NO_DSC) {
printk(KERN_INFO "ide-tape: %s: disabling DSC overlap\n",
tape->name);
- drive->dsc_overlap = 0;
+ drive->dev_flags &= ~IDE_DFLAG_DSC_OVERLAP;
}
+
/* Seagate Travan drives do not support DSC overlap. */
if (strstr((char *)&drive->id[ATA_ID_PROD], "Seagate STT3401"))
- drive->dsc_overlap = 0;
+ drive->dev_flags &= ~IDE_DFLAG_DSC_OVERLAP;
+
tape->minor = minor;
tape->name[0] = 'h';
tape->name[1] = 't';
tape->name[2] = '0' + minor;
tape->chrdev_dir = IDETAPE_DIR_NONE;

- *((u16 *)&gcw) = drive->id[ATA_ID_CONFIG];
-
- /* Command packet DRQ type */
- if (((gcw[0] & 0x60) >> 5) == 1)
- set_bit(IDE_AFLAG_DRQ_INTERRUPT, &drive->atapi_flags);
-
idetape_get_inquiry_results(drive);
idetape_get_mode_sense_results(drive);
ide_tape_get_bsize_from_bdesc(drive);
@@ -2302,7 +2245,7 @@ static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor)
(*(u16 *)&tape->caps[16] * 512) / tape->buffer_size,
tape->buffer_size / 1024,
tape->best_dsc_rw_freq * 1000 / HZ,
- drive->using_dma ? ", DMA":"");
+ (drive->dev_flags & IDE_DFLAG_USING_DMA) ? ", DMA" : "");

ide_proc_register_driver(drive, tape->driver);
}
@@ -2320,13 +2263,13 @@ static void ide_tape_remove(ide_drive_t *drive)

static void ide_tape_release(struct kref *kref)
{
- struct ide_tape_obj *tape = to_ide_tape(kref);
+ struct ide_tape_obj *tape = to_ide_drv(kref, ide_tape_obj);
ide_drive_t *drive = tape->drive;
struct gendisk *g = tape->disk;

BUG_ON(tape->merge_bh_size);

- drive->dsc_overlap = 0;
+ drive->dev_flags &= ~IDE_DFLAG_DSC_OVERLAP;
drive->driver_data = NULL;
device_destroy(idetape_sysfs_class, MKDEV(IDETAPE_MAJOR, tape->minor));
device_destroy(idetape_sysfs_class,
@@ -2368,7 +2311,6 @@ static ide_driver_t idetape_driver = {
.probe = ide_tape_probe,
.remove = ide_tape_remove,
.version = IDETAPE_VERSION,
- .media = ide_tape,
.do_request = idetape_do_request,
.end_request = idetape_end_request,
.error = __ide_error,
@@ -2403,7 +2345,7 @@ static int idetape_open(struct inode *inode, struct file *filp)
static int idetape_release(struct inode *inode, struct file *filp)
{
struct gendisk *disk = inode->i_bdev->bd_disk;
- struct ide_tape_obj *tape = ide_tape_g(disk);
+ struct ide_tape_obj *tape = ide_drv_g(disk, ide_tape_obj);

ide_tape_put(tape);

@@ -2414,7 +2356,7 @@ static int idetape_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
struct block_device *bdev = inode->i_bdev;
- struct ide_tape_obj *tape = ide_tape_g(bdev->bd_disk);
+ struct ide_tape_obj *tape = ide_drv_g(bdev->bd_disk, ide_tape_obj);
ide_drive_t *drive = tape->drive;
int err = generic_ide_ioctl(drive, file, bdev, cmd, arg);
if (err == -EINVAL)
@@ -2441,7 +2383,8 @@ static int ide_tape_probe(ide_drive_t *drive)
if (drive->media != ide_tape)
goto failed;

- if (drive->id_read == 1 && !ide_check_atapi_device(drive, DRV_NAME)) {
+ if ((drive->dev_flags & IDE_DFLAG_ID_READ) &&
+ ide_check_atapi_device(drive, DRV_NAME) == 0) {
printk(KERN_ERR "ide-tape: %s: not supported by this version of"
" the driver\n", drive->name);
goto failed;
diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c
index 487b18b..bf4fb9d 100644
--- a/drivers/ide/ide-taskfile.c
+++ b/drivers/ide/ide-taskfile.c
@@ -53,9 +53,6 @@ int taskfile_lib_get_identify (ide_drive_t *drive, u8 *buf)
}

static ide_startstop_t task_no_data_intr(ide_drive_t *);
-static ide_startstop_t set_geometry_intr(ide_drive_t *);
-static ide_startstop_t recal_intr(ide_drive_t *);
-static ide_startstop_t set_multmode_intr(ide_drive_t *);
static ide_startstop_t pre_task_out_intr(ide_drive_t *, struct request *);
static ide_startstop_t task_in_intr(ide_drive_t *);

@@ -79,6 +76,8 @@ ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task)
if (task->tf_flags & IDE_TFLAG_FLAGGED)
task->tf_flags |= IDE_TFLAG_FLAGGED_SET_IN_FLAGS;

+ memcpy(&hwif->task, task, sizeof(*task));
+
if ((task->tf_flags & IDE_TFLAG_DMA_PIO_FALLBACK) == 0) {
ide_tf_dump(drive->name, tf);
tp_ops->set_irq(hwif, 1);
@@ -99,24 +98,12 @@ ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task)
case TASKFILE_NO_DATA:
if (handler == NULL)
handler = task_no_data_intr;
- if (task->tf_flags & IDE_TFLAG_CUSTOM_HANDLER) {
- switch (tf->command) {
- case ATA_CMD_INIT_DEV_PARAMS:
- handler = set_geometry_intr;
- break;
- case ATA_CMD_RESTORE:
- handler = recal_intr;
- break;
- case ATA_CMD_SET_MULTI:
- handler = set_multmode_intr;
- break;
- }
- }
ide_execute_command(drive, tf->command, handler,
WAIT_WORSTCASE, NULL);
return ide_started;
default:
- if (drive->using_dma == 0 || dma_ops->dma_setup(drive))
+ if ((drive->dev_flags & IDE_DFLAG_USING_DMA) == 0 ||
+ dma_ops->dma_setup(drive))
return ide_stopped;
dma_ops->dma_exec_cmd(drive, tf->command);
dma_ops->dma_start(drive);
@@ -126,33 +113,15 @@ ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task)
EXPORT_SYMBOL_GPL(do_rw_taskfile);

/*
- * set_multmode_intr() is invoked on completion of a ATA_CMD_SET_MULTI cmd.
- */
-static ide_startstop_t set_multmode_intr(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- u8 stat;
-
- local_irq_enable_in_hardirq();
- stat = hwif->tp_ops->read_status(hwif);
-
- if (OK_STAT(stat, ATA_DRDY, BAD_STAT))
- drive->mult_count = drive->mult_req;
- else {
- drive->mult_req = drive->mult_count = 0;
- drive->special.b.recalibrate = 1;
- (void) ide_dump_status(drive, "set_multmode", stat);
- }
- return ide_stopped;
-}
-
-/*
- * set_geometry_intr() is invoked on completion of a ATA_CMD_INIT_DEV_PARAMS cmd.
+ * Handler for commands without a data phase
*/
-static ide_startstop_t set_geometry_intr(ide_drive_t *drive)
+static ide_startstop_t task_no_data_intr(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
- int retries = 5;
+ ide_task_t *task = &hwif->task;
+ struct ide_taskfile *tf = &task->tf;
+ int custom = (task->tf_flags & IDE_TFLAG_CUSTOM_HANDLER) ? 1 : 0;
+ int retries = (custom && tf->command == ATA_CMD_INIT_DEV_PARAMS) ? 5 : 1;
u8 stat;

local_irq_enable_in_hardirq();
@@ -164,50 +133,36 @@ static ide_startstop_t set_geometry_intr(ide_drive_t *drive)
udelay(10);
};

- if (OK_STAT(stat, ATA_DRDY, BAD_STAT))
- return ide_stopped;
-
- if (stat & (ATA_ERR | ATA_DRQ))
- return ide_error(drive, "set_geometry_intr", stat);
-
- ide_set_handler(drive, &set_geometry_intr, WAIT_WORSTCASE, NULL);
- return ide_started;
-}
-
-/*
- * recal_intr() is invoked on completion of a ATA_CMD_RESTORE (recalibrate) cmd.
- */
-static ide_startstop_t recal_intr(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- u8 stat;
-
- local_irq_enable_in_hardirq();
- stat = hwif->tp_ops->read_status(hwif);
-
- if (!OK_STAT(stat, ATA_DRDY, BAD_STAT))
- return ide_error(drive, "recal_intr", stat);
- return ide_stopped;
-}
-
-/*
- * Handler for commands without a data phase
- */
-static ide_startstop_t task_no_data_intr(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- ide_task_t *args = hwif->hwgroup->rq->special;
- u8 stat;
-
- local_irq_enable_in_hardirq();
- stat = hwif->tp_ops->read_status(hwif);
-
- if (!OK_STAT(stat, ATA_DRDY, BAD_STAT))
+ if (!OK_STAT(stat, ATA_DRDY, BAD_STAT)) {
+ if (custom && tf->command == ATA_CMD_SET_MULTI) {
+ drive->mult_req = drive->mult_count = 0;
+ drive->special.b.recalibrate = 1;
+ (void)ide_dump_status(drive, __func__, stat);
+ return ide_stopped;
+ } else if (custom && tf->command == ATA_CMD_INIT_DEV_PARAMS) {
+ if ((stat & (ATA_ERR | ATA_DRQ)) == 0) {
+ ide_set_handler(drive, &task_no_data_intr,
+ WAIT_WORSTCASE, NULL);
+ return ide_started;
+ }
+ }
return ide_error(drive, "task_no_data_intr", stat);
/* calls ide_end_drive_cmd */
+ }

- if (args)
+ if (!custom)
+ ide_end_drive_cmd(drive, stat, ide_read_error(drive));
+ else if (tf->command == ATA_CMD_IDLEIMMEDIATE) {
+ hwif->tp_ops->tf_read(drive, task);
+ if (tf->lbal != 0xc4) {
+ printk(KERN_ERR "%s: head unload failed!\n",
+ drive->name);
+ ide_tf_dump(drive->name, tf);
+ } else
+ drive->dev_flags |= IDE_DFLAG_PARKED;
ide_end_drive_cmd(drive, stat, ide_read_error(drive));
+ } else if (tf->command == ATA_CMD_SET_MULTI)
+ drive->mult_count = drive->mult_req;

return ide_stopped;
}
@@ -469,13 +424,12 @@ static ide_startstop_t pre_task_out_intr(ide_drive_t *drive, struct request *rq)
if (ide_wait_stat(&startstop, drive, ATA_DRQ,
drive->bad_wstat, WAIT_DRQ)) {
printk(KERN_ERR "%s: no DRQ after issuing %sWRITE%s\n",
- drive->name,
- drive->hwif->data_phase ? "MULT" : "",
- drive->addressing ? "_EXT" : "");
+ drive->name, drive->hwif->data_phase ? "MULT" : "",
+ (drive->dev_flags & IDE_DFLAG_LBA48) ? "_EXT" : "");
return startstop;
}

- if (!drive->unmask)
+ if ((drive->dev_flags & IDE_DFLAG_UNMASK) == 0)
local_irq_disable();

ide_set_handler(drive, &task_out_intr, WAIT_WORSTCASE, NULL);
@@ -591,7 +545,7 @@ int ide_taskfile_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg)

args.tf_flags = IDE_TFLAG_IO_16BIT | IDE_TFLAG_DEVICE |
IDE_TFLAG_IN_TF;
- if (drive->addressing == 1)
+ if (drive->dev_flags & IDE_DFLAG_LBA48)
args.tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_IN_HOB);

if (req_task->out_flags.all) {
@@ -694,7 +648,7 @@ int ide_taskfile_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg)
if ((args.tf_flags & IDE_TFLAG_FLAGGED_SET_IN_FLAGS) &&
req_task->in_flags.all == 0) {
req_task->in_flags.all = IDE_TASKFILE_STD_IN_FLAGS;
- if (drive->addressing == 1)
+ if (drive->dev_flags & IDE_DFLAG_LBA48)
req_task->in_flags.all |= (IDE_HOB_STD_IN_FLAGS << 8);
}

diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index 9dcf5ae..04f8f13 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -114,7 +114,7 @@ static void ide_port_init_devices_data(ide_hwif_t *hwif)
memset(drive, 0, sizeof(*drive));

drive->media = ide_disk;
- drive->select.all = (unit<<4)|0xa0;
+ drive->select = (unit << 4) | ATA_DEVICE_OBS;
drive->hwif = hwif;
drive->ready_stat = ATA_DRDY;
drive->bad_wstat = BAD_W_STAT;
@@ -138,7 +138,7 @@ static void __ide_port_unregister_devices(ide_hwif_t *hwif)
for (i = 0; i < MAX_DRIVES; i++) {
ide_drive_t *drive = &hwif->drives[i];

- if (drive->present) {
+ if (drive->dev_flags & IDE_DFLAG_PRESENT) {
spin_unlock_irq(&ide_lock);
device_unregister(&drive->gendev);
wait_for_completion(&drive->gendev_rel_comp);
@@ -227,8 +227,7 @@ void ide_unregister(ide_hwif_t *hwif)
kfree(hwif->sg_table);
unregister_blkdev(hwif->major, hwif->name);

- if (hwif->dma_base)
- ide_release_dma_engine(hwif);
+ ide_release_dma_engine(hwif);

mutex_unlock(&ide_cfg_mtx);
}
@@ -254,7 +253,7 @@ ide_devset_get(io_32bit, io_32bit);

static int set_io_32bit(ide_drive_t *drive, int arg)
{
- if (drive->no_io_32bit)
+ if (drive->dev_flags & IDE_DFLAG_NO_IO_32BIT)
return -EPERM;

if (arg < 0 || arg > 1 + (SUPPORT_VLB_SYNC << 1))
@@ -265,19 +264,22 @@ static int set_io_32bit(ide_drive_t *drive, int arg)
return 0;
}

-ide_devset_get(ksettings, keep_settings);
+ide_devset_get_flag(ksettings, IDE_DFLAG_KEEP_SETTINGS);

static int set_ksettings(ide_drive_t *drive, int arg)
{
if (arg < 0 || arg > 1)
return -EINVAL;

- drive->keep_settings = arg;
+ if (arg)
+ drive->dev_flags |= IDE_DFLAG_KEEP_SETTINGS;
+ else
+ drive->dev_flags &= ~IDE_DFLAG_KEEP_SETTINGS;

return 0;
}

-ide_devset_get(using_dma, using_dma);
+ide_devset_get_flag(using_dma, IDE_DFLAG_USING_DMA);

static int set_using_dma(ide_drive_t *drive, int arg)
{
@@ -311,9 +313,32 @@ out:
#endif
}

+/*
+ * handle HDIO_SET_PIO_MODE ioctl abusers here, eventually it will go away
+ */
+static int set_pio_mode_abuse(ide_hwif_t *hwif, u8 req_pio)
+{
+ switch (req_pio) {
+ case 202:
+ case 201:
+ case 200:
+ case 102:
+ case 101:
+ case 100:
+ return (hwif->host_flags & IDE_HFLAG_ABUSE_DMA_MODES) ? 1 : 0;
+ case 9:
+ case 8:
+ return (hwif->host_flags & IDE_HFLAG_ABUSE_PREFETCH) ? 1 : 0;
+ case 7:
+ case 6:
+ return (hwif->host_flags & IDE_HFLAG_ABUSE_FAST_DEVSEL) ? 1 : 0;
+ default:
+ return 0;
+ }
+}
+
static int set_pio_mode(ide_drive_t *drive, int arg)
{
- struct request *rq;
ide_hwif_t *hwif = drive->hwif;
const struct ide_port_ops *port_ops = hwif->port_ops;

@@ -324,56 +349,65 @@ static int set_pio_mode(ide_drive_t *drive, int arg)
(hwif->host_flags & IDE_HFLAG_NO_SET_MODE))
return -ENOSYS;

- if (drive->special.b.set_tune)
- return -EBUSY;
+ if (set_pio_mode_abuse(drive->hwif, arg)) {
+ if (arg == 8 || arg == 9) {
+ unsigned long flags;

- rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
- rq->cmd_type = REQ_TYPE_ATA_TASKFILE;
+ /* take lock for IDE_DFLAG_[NO_]UNMASK/[NO_]IO_32BIT */
+ spin_lock_irqsave(&ide_lock, flags);
+ port_ops->set_pio_mode(drive, arg);
+ spin_unlock_irqrestore(&ide_lock, flags);
+ } else
+ port_ops->set_pio_mode(drive, arg);
+ } else {
+ int keep_dma = !!(drive->dev_flags & IDE_DFLAG_USING_DMA);

- drive->tune_req = (u8) arg;
- drive->special.b.set_tune = 1;
+ ide_set_pio(drive, arg);

- blk_execute_rq(drive->queue, NULL, rq, 0);
- blk_put_request(rq);
+ if (hwif->host_flags & IDE_HFLAG_SET_PIO_MODE_KEEP_DMA) {
+ if (keep_dma)
+ ide_dma_on(drive);
+ }
+ }

return 0;
}

-ide_devset_get(unmaskirq, unmask);
+ide_devset_get_flag(unmaskirq, IDE_DFLAG_UNMASK);

static int set_unmaskirq(ide_drive_t *drive, int arg)
{
- if (drive->no_unmask)
+ if (drive->dev_flags & IDE_DFLAG_NO_UNMASK)
return -EPERM;

if (arg < 0 || arg > 1)
return -EINVAL;

- drive->unmask = arg;
+ if (arg)
+ drive->dev_flags |= IDE_DFLAG_UNMASK;
+ else
+ drive->dev_flags &= ~IDE_DFLAG_UNMASK;

return 0;
}

-#define ide_gen_devset_rw(_name, _func) \
-__IDE_DEVSET(_name, DS_SYNC, get_##_func, set_##_func)
-
-ide_gen_devset_rw(io_32bit, io_32bit);
-ide_gen_devset_rw(keepsettings, ksettings);
-ide_gen_devset_rw(unmaskirq, unmaskirq);
-ide_gen_devset_rw(using_dma, using_dma);
-__IDE_DEVSET(pio_mode, 0, NULL, set_pio_mode);
+ide_ext_devset_rw_sync(io_32bit, io_32bit);
+ide_ext_devset_rw_sync(keepsettings, ksettings);
+ide_ext_devset_rw_sync(unmaskirq, unmaskirq);
+ide_ext_devset_rw_sync(using_dma, using_dma);
+__IDE_DEVSET(pio_mode, DS_SYNC, NULL, set_pio_mode);

static int generic_ide_suspend(struct device *dev, pm_message_t mesg)
{
- ide_drive_t *drive = dev->driver_data;
+ ide_drive_t *drive = dev->driver_data, *pair = ide_get_pair_dev(drive);
ide_hwif_t *hwif = HWIF(drive);
struct request *rq;
struct request_pm_state rqpm;
ide_task_t args;
int ret;

- /* Call ACPI _GTM only once */
- if (!(drive->dn % 2))
+ /* call ACPI _GTM only once */
+ if ((drive->dn & 1) == 0 || pair == NULL)
ide_acpi_get_timing(hwif);

memset(&rqpm, 0, sizeof(rqpm));
@@ -382,33 +416,32 @@ static int generic_ide_suspend(struct device *dev, pm_message_t mesg)
rq->cmd_type = REQ_TYPE_PM_SUSPEND;
rq->special = &args;
rq->data = &rqpm;
- rqpm.pm_step = ide_pm_state_start_suspend;
+ rqpm.pm_step = IDE_PM_START_SUSPEND;
if (mesg.event == PM_EVENT_PRETHAW)
mesg.event = PM_EVENT_FREEZE;
rqpm.pm_state = mesg.event;

ret = blk_execute_rq(drive->queue, NULL, rq, 0);
blk_put_request(rq);
- /* only call ACPI _PS3 after both drivers are suspended */
- if (!ret && (((drive->dn % 2) && hwif->drives[0].present
- && hwif->drives[1].present)
- || !hwif->drives[0].present
- || !hwif->drives[1].present))
+
+ /* call ACPI _PS3 only after both devices are suspended */
+ if (ret == 0 && ((drive->dn & 1) || pair == NULL))
ide_acpi_set_state(hwif, 0);
+
return ret;
}

static int generic_ide_resume(struct device *dev)
{
- ide_drive_t *drive = dev->driver_data;
+ ide_drive_t *drive = dev->driver_data, *pair = ide_get_pair_dev(drive);
ide_hwif_t *hwif = HWIF(drive);
struct request *rq;
struct request_pm_state rqpm;
ide_task_t args;
int err;

- /* Call ACPI _STM only once */
- if (!(drive->dn % 2)) {
+ /* call ACPI _PS0 / _STM only once */
+ if ((drive->dn & 1) == 0 || pair == NULL) {
ide_acpi_set_state(hwif, 1);
ide_acpi_push_timing(hwif);
}
@@ -422,7 +455,7 @@ static int generic_ide_resume(struct device *dev)
rq->cmd_flags |= REQ_PREEMPT;
rq->special = &args;
rq->data = &rqpm;
- rqpm.pm_step = ide_pm_state_start_resume;
+ rqpm.pm_step = IDE_PM_START_RESUME;
rqpm.pm_state = PM_EVENT_ON;

err = blk_execute_rq(drive->queue, NULL, rq, 1);
@@ -554,6 +587,7 @@ static struct device_attribute ide_dev_attrs[] = {
__ATTR_RO(model),
__ATTR_RO(firmware),
__ATTR(serial, 0400, serial_show, NULL),
+ __ATTR(unload_heads, 0644, ide_park_show, ide_park_store),
__ATTR_NULL
};

@@ -708,22 +742,22 @@ static int ide_set_disk_chs(const char *str, struct kernel_param *kp)
module_param_call(chs, ide_set_disk_chs, NULL, NULL, 0);
MODULE_PARM_DESC(chs, "force device as a disk (using CHS)");

-static void ide_dev_apply_params(ide_drive_t *drive)
+static void ide_dev_apply_params(ide_drive_t *drive, u8 unit)
{
- int i = drive->hwif->index * MAX_DRIVES + drive->select.b.unit;
+ int i = drive->hwif->index * MAX_DRIVES + unit;

if (ide_nodma & (1 << i)) {
printk(KERN_INFO "ide: disallowing DMA for %s\n", drive->name);
- drive->nodma = 1;
+ drive->dev_flags |= IDE_DFLAG_NODMA;
}
if (ide_noflush & (1 << i)) {
printk(KERN_INFO "ide: disabling flush requests for %s\n",
drive->name);
- drive->noflush = 1;
+ drive->dev_flags |= IDE_DFLAG_NOFLUSH;
}
if (ide_noprobe & (1 << i)) {
printk(KERN_INFO "ide: skipping probe for %s\n", drive->name);
- drive->noprobe = 1;
+ drive->dev_flags |= IDE_DFLAG_NOPROBE;
}
if (ide_nowerr & (1 << i)) {
printk(KERN_INFO "ide: ignoring the ATA_DF bit for %s\n",
@@ -732,7 +766,7 @@ static void ide_dev_apply_params(ide_drive_t *drive)
}
if (ide_cdroms & (1 << i)) {
printk(KERN_INFO "ide: forcing %s as a CD-ROM\n", drive->name);
- drive->present = 1;
+ drive->dev_flags |= IDE_DFLAG_PRESENT;
drive->media = ide_cdrom;
/* an ATAPI device ignores DRDY */
drive->ready_stat = 0;
@@ -741,11 +775,12 @@ static void ide_dev_apply_params(ide_drive_t *drive)
drive->cyl = drive->bios_cyl = ide_disks_chs[i].cyl;
drive->head = drive->bios_head = ide_disks_chs[i].head;
drive->sect = drive->bios_sect = ide_disks_chs[i].sect;
- drive->forced_geom = 1;
+
printk(KERN_INFO "ide: forcing %s as a disk (%d/%d/%d)\n",
drive->name,
drive->cyl, drive->head, drive->sect);
- drive->present = 1;
+
+ drive->dev_flags |= IDE_DFLAG_FORCED_GEOM | IDE_DFLAG_PRESENT;
drive->media = ide_disk;
drive->ready_stat = ATA_DRDY;
}
@@ -785,7 +820,7 @@ void ide_port_apply_params(ide_hwif_t *hwif)
}

for (i = 0; i < MAX_DRIVES; i++)
- ide_dev_apply_params(&hwif->drives[i]);
+ ide_dev_apply_params(&hwif->drives[i], i);
}

/*
diff --git a/drivers/ide/legacy/ali14xx.c b/drivers/ide/legacy/ali14xx.c
index 7276c96..90da1f9 100644
--- a/drivers/ide/legacy/ali14xx.c
+++ b/drivers/ide/legacy/ali14xx.c
@@ -131,7 +131,7 @@ static void ali14xx_set_pio_mode(ide_drive_t *drive, const u8 pio)
drive->name, pio, time1, time2, param1, param2, param3, param4);

/* stuff timing parameters into controller registers */
- driveNum = (HWIF(drive)->index << 1) + drive->select.b.unit;
+ driveNum = (drive->hwif->index << 1) + (drive->dn & 1);
spin_lock_irqsave(&ali14xx_lock, flags);
outb_p(regOn, basePort);
outReg(param1, regTab[driveNum].reg1);
diff --git a/drivers/ide/legacy/ht6560b.c b/drivers/ide/legacy/ht6560b.c
index 5123ea2..c7e5c22 100644
--- a/drivers/ide/legacy/ht6560b.c
+++ b/drivers/ide/legacy/ht6560b.c
@@ -120,7 +120,8 @@ static void ht6560b_selectproc (ide_drive_t *drive)
* Need to enforce prefetch sometimes because otherwise
* it'll hang (hard).
*/
- if (drive->media != ide_disk || !drive->present)
+ if (drive->media != ide_disk ||
+ (drive->dev_flags & IDE_DFLAG_PRESENT) == 0)
select |= HT_PREFETCH_MODE;

if (select != current_select || timing != current_timing) {
@@ -249,11 +250,11 @@ static void ht_set_prefetch(ide_drive_t *drive, u8 state)
*/
if (state) {
drive->drive_data |= t; /* enable prefetch mode */
- drive->no_unmask = 1;
- drive->unmask = 0;
+ drive->dev_flags |= IDE_DFLAG_NO_UNMASK;
+ drive->dev_flags &= ~IDE_DFLAG_UNMASK;
} else {
drive->drive_data &= ~t; /* disable prefetch mode */
- drive->no_unmask = 0;
+ drive->dev_flags &= ~IDE_DFLAG_NO_UNMASK;
}

spin_unlock_irqrestore(&ht6560b_lock, flags);
diff --git a/drivers/ide/legacy/ide-4drives.c b/drivers/ide/legacy/ide-4drives.c
index c76d55d..9e85b1e 100644
--- a/drivers/ide/legacy/ide-4drives.c
+++ b/drivers/ide/legacy/ide-4drives.c
@@ -14,7 +14,7 @@ MODULE_PARM_DESC(probe, "probe for generic IDE chipset with 4 drives/port");
static void ide_4drives_init_dev(ide_drive_t *drive)
{
if (drive->hwif->channel)
- drive->select.all ^= 0x20;
+ drive->select ^= 0x20;
}

static const struct ide_port_ops ide_4drives_port_ops = {
diff --git a/drivers/ide/legacy/qd65xx.c b/drivers/ide/legacy/qd65xx.c
index ec408b3..bc27c7a 100644
--- a/drivers/ide/legacy/qd65xx.c
+++ b/drivers/ide/legacy/qd65xx.c
@@ -305,7 +305,7 @@ static void __init qd6580_init_dev(ide_drive_t *drive)
} else
t2 = t1 = hwif->channel ? QD6580_DEF_DATA2 : QD6580_DEF_DATA;

- drive->drive_data = drive->select.b.unit ? t2 : t1;
+ drive->drive_data = (drive->dn & 1) ? t2 : t1;
}

static const struct ide_port_ops qd6500_port_ops = {
diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c
index 11b7f61..0ec8fd1 100644
--- a/drivers/ide/mips/au1xxx-ide.c
+++ b/drivers/ide/mips/au1xxx-ide.c
@@ -322,11 +322,7 @@ static int auide_dma_setup(ide_drive_t *drive)
}

static int auide_dma_test_irq(ide_drive_t *drive)
-{
- if (drive->waiting_for_dma == 0)
- printk(KERN_WARNING "%s: ide_dma_test_irq \
- called while not waiting\n", drive->name);
-
+{
/* If dbdma didn't execute the STOP command yet, the
* active bit is still set
*/
@@ -344,11 +340,6 @@ static void auide_dma_host_set(ide_drive_t *drive, int on)
{
}

-static void auide_dma_lost_irq(ide_drive_t *drive)
-{
- printk(KERN_ERR "%s: IRQ lost\n", drive->name);
-}
-
static void auide_ddma_tx_callback(int irq, void *param)
{
_auide_hwif *ahwif = (_auide_hwif*)param;
@@ -375,18 +366,6 @@ static void auide_init_dbdma_dev(dbdev_tab_t *dev, u32 dev_id, u32 tsize, u32 de
}

#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
-static void auide_dma_timeout(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = HWIF(drive);
-
- printk(KERN_ERR "%s: DMA timeout occurred: ", drive->name);
-
- if (auide_dma_test_irq(drive))
- return;
-
- auide_dma_end(drive);
-}
-
static const struct ide_dma_ops au1xxx_dma_ops = {
.dma_host_set = auide_dma_host_set,
.dma_setup = auide_dma_setup,
@@ -394,8 +373,8 @@ static const struct ide_dma_ops au1xxx_dma_ops = {
.dma_start = auide_dma_start,
.dma_end = auide_dma_end,
.dma_test_irq = auide_dma_test_irq,
- .dma_lost_irq = auide_dma_lost_irq,
- .dma_timeout = auide_dma_timeout,
+ .dma_lost_irq = ide_dma_lost_irq,
+ .dma_timeout = ide_dma_timeout,
};

static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d)
@@ -448,10 +427,9 @@ static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d)
NUM_DESCRIPTORS);
auide->rx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->rx_chan,
NUM_DESCRIPTORS);
-
- hwif->dmatable_cpu = dma_alloc_coherent(hwif->dev,
- PRD_ENTRIES * PRD_BYTES, /* 1 Page */
- &hwif->dmatable_dma, GFP_KERNEL);
+
+ /* FIXME: check return value */
+ (void)ide_allocate_dma_engine(hwif);

au1xxx_dbdma_start( auide->tx_chan );
au1xxx_dbdma_start( auide->rx_chan );
diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c
index e7475ba..4142c69 100644
--- a/drivers/ide/pci/aec62xx.c
+++ b/drivers/ide/pci/aec62xx.c
@@ -115,7 +115,7 @@ static void aec6260_set_mode(ide_drive_t *drive, const u8 speed)
struct pci_dev *dev = to_pci_dev(hwif->dev);
struct ide_host *host = pci_get_drvdata(dev);
struct chipset_bus_clock_list_entry *bus_clock = host->host_priv;
- u8 unit = (drive->select.b.unit & 0x01);
+ u8 unit = drive->dn & 1;
u8 tmp1 = 0, tmp2 = 0;
u8 ultra = 0, drive_conf = 0, ultra_conf = 0;
unsigned long flags;
@@ -302,7 +302,7 @@ static const struct pci_device_id aec62xx_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, aec62xx_pci_tbl);

-static struct pci_driver driver = {
+static struct pci_driver aec62xx_pci_driver = {
.name = "AEC62xx_IDE",
.id_table = aec62xx_pci_tbl,
.probe = aec62xx_init_one,
@@ -313,12 +313,12 @@ static struct pci_driver driver = {

static int __init aec62xx_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&aec62xx_pci_driver);
}

static void __exit aec62xx_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&aec62xx_pci_driver);
}

module_init(aec62xx_ide_init);
diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c
index 053c752..daf9dce 100644
--- a/drivers/ide/pci/alim15x3.c
+++ b/drivers/ide/pci/alim15x3.c
@@ -77,8 +77,7 @@ static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio)
int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
int port = hwif->channel ? 0x5c : 0x58;
int portFIFO = hwif->channel ? 0x55 : 0x54;
- u8 cd_dma_fifo = 0;
- int unit = drive->select.b.unit & 1;
+ u8 cd_dma_fifo = 0, unit = drive->dn & 1;

if ((s_clc = (s_time * bus_speed + 999) / 1000) >= 8)
s_clc = 0;
@@ -112,7 +111,7 @@ static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio)
}

pci_write_config_byte(dev, port, s_clc);
- pci_write_config_byte(dev, port+drive->select.b.unit+2, (a_clc << 4) | r_clc);
+ pci_write_config_byte(dev, port + unit + 2, (a_clc << 4) | r_clc);
local_irq_restore(flags);
}

@@ -154,7 +153,7 @@ static void ali_set_dma_mode(ide_drive_t *drive, const u8 speed)
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 speed1 = speed;
- u8 unit = (drive->select.b.unit & 0x01);
+ u8 unit = drive->dn & 1;
u8 tmpbyte = 0x00;
int m5229_udma = (hwif->channel) ? 0x57 : 0x56;

@@ -508,7 +507,7 @@ static const struct ide_dma_ops ali_dma_ops = {
.dma_setup = ali15x3_dma_setup,
.dma_exec_cmd = ide_dma_exec_cmd,
.dma_start = ide_dma_start,
- .dma_end = __ide_dma_end,
+ .dma_end = ide_dma_end,
.dma_test_irq = ide_dma_test_irq,
.dma_lost_irq = ide_dma_lost_irq,
.dma_timeout = ide_dma_timeout,
@@ -576,7 +575,7 @@ static const struct pci_device_id alim15x3_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, alim15x3_pci_tbl);

-static struct pci_driver driver = {
+static struct pci_driver alim15x3_pci_driver = {
.name = "ALI15x3_IDE",
.id_table = alim15x3_pci_tbl,
.probe = alim15x3_init_one,
@@ -587,12 +586,12 @@ static struct pci_driver driver = {

static int __init ali15x3_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&alim15x3_pci_driver);
}

static void __exit ali15x3_ide_exit(void)
{
- return pci_unregister_driver(&driver);
+ return pci_unregister_driver(&alim15x3_pci_driver);
}

module_init(ali15x3_ide_init);
diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c
index 824471f..81ec731 100644
--- a/drivers/ide/pci/amd74xx.c
+++ b/drivers/ide/pci/amd74xx.c
@@ -92,7 +92,7 @@ static void amd_set_drive(ide_drive_t *drive, const u8 speed)

ide_timing_compute(drive, speed, &t, T, UT);

- if (peer->present) {
+ if (peer->dev_flags & IDE_DFLAG_PRESENT) {
ide_timing_compute(peer, peer->current_speed, &p, T, UT);
ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT);
}
@@ -319,7 +319,7 @@ static const struct pci_device_id amd74xx_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, amd74xx_pci_tbl);

-static struct pci_driver driver = {
+static struct pci_driver amd74xx_pci_driver = {
.name = "AMD_IDE",
.id_table = amd74xx_pci_tbl,
.probe = amd74xx_probe,
@@ -330,12 +330,12 @@ static struct pci_driver driver = {

static int __init amd74xx_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&amd74xx_pci_driver);
}

static void __exit amd74xx_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&amd74xx_pci_driver);
}

module_init(amd74xx_ide_init);
diff --git a/drivers/ide/pci/atiixp.c b/drivers/ide/pci/atiixp.c
index e443703..b2735d2 100644
--- a/drivers/ide/pci/atiixp.c
+++ b/drivers/ide/pci/atiixp.c
@@ -182,7 +182,7 @@ static const struct pci_device_id atiixp_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, atiixp_pci_tbl);

-static struct pci_driver driver = {
+static struct pci_driver atiixp_pci_driver = {
.name = "ATIIXP_IDE",
.id_table = atiixp_pci_tbl,
.probe = atiixp_init_one,
@@ -193,12 +193,12 @@ static struct pci_driver driver = {

static int __init atiixp_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&atiixp_pci_driver);
}

static void __exit atiixp_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&atiixp_pci_driver);
}

module_init(atiixp_ide_init);
diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c
index 7f39cdb..e430664 100644
--- a/drivers/ide/pci/cmd640.c
+++ b/drivers/ide/pci/cmd640.c
@@ -378,13 +378,13 @@ static void __set_prefetch_mode(ide_drive_t *drive, int mode)
{
if (mode) { /* want prefetch on? */
#if CMD640_PREFETCH_MASKS
- drive->no_unmask = 1;
- drive->unmask = 0;
+ drive->dev_flags |= IDE_DFLAG_NO_UNMASK;
+ drive->dev_flags &= ~IDE_DFLAG_UNMASK;
#endif
- drive->no_io_32bit = 0;
+ drive->dev_flags &= ~IDE_DFLAG_NO_IO_32BIT;
} else {
- drive->no_unmask = 0;
- drive->no_io_32bit = 1;
+ drive->dev_flags &= ~IDE_DFLAG_NO_UNMASK;
+ drive->dev_flags |= IDE_DFLAG_NO_IO_32BIT;
drive->io_32bit = 0;
}
}
@@ -468,10 +468,10 @@ static void program_drive_counts(ide_drive_t *drive, unsigned int index)
*/
if (index > 1) {
ide_hwif_t *hwif = drive->hwif;
- ide_drive_t *peer = &hwif->drives[!drive->select.b.unit];
+ ide_drive_t *peer = &hwif->drives[!(drive->dn & 1)];
unsigned int mate = index ^ 1;

- if (peer->present) {
+ if (peer->dev_flags & IDE_DFLAG_PRESENT) {
if (setup_count < setup_counts[mate])
setup_count = setup_counts[mate];
if (active_count < active_counts[mate])
@@ -607,7 +607,7 @@ static void cmd640_set_pio_mode(ide_drive_t *drive, const u8 pio)

static void cmd640_init_dev(ide_drive_t *drive)
{
- unsigned int i = drive->hwif->channel * 2 + drive->select.b.unit;
+ unsigned int i = drive->hwif->channel * 2 + (drive->dn & 1);

#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
/*
@@ -626,7 +626,7 @@ static void cmd640_init_dev(ide_drive_t *drive)
*/
check_prefetch(drive, i);
printk(KERN_INFO DRV_NAME ": drive%d timings/prefetch(%s) preserved\n",
- i, drive->no_io_32bit ? "off" : "on");
+ i, (drive->dev_flags & IDE_DFLAG_NO_IO_32BIT) ? "off" : "on");
#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
}

diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c
index 456dee1..935385c 100644
--- a/drivers/ide/pci/cmd64x.c
+++ b/drivers/ide/pci/cmd64x.c
@@ -228,7 +228,7 @@ static int cmd648_dma_end(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
unsigned long base = hwif->dma_base - (hwif->channel * 8);
- int err = __ide_dma_end(drive);
+ int err = ide_dma_end(drive);
u8 irq_mask = hwif->channel ? MRDMODE_INTR_CH1 :
MRDMODE_INTR_CH0;
u8 mrdmode = inb(base + 1);
@@ -248,7 +248,7 @@ static int cmd64x_dma_end(ide_drive_t *drive)
u8 irq_mask = hwif->channel ? ARTTIM23_INTR_CH1 :
CFR_INTR_CH0;
u8 irq_stat = 0;
- int err = __ide_dma_end(drive);
+ int err = ide_dma_end(drive);

(void) pci_read_config_byte(dev, irq_reg, &irq_stat);
/* clear the interrupt bit */
@@ -505,7 +505,7 @@ static const struct pci_device_id cmd64x_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, cmd64x_pci_tbl);

-static struct pci_driver driver = {
+static struct pci_driver cmd64x_pci_driver = {
.name = "CMD64x_IDE",
.id_table = cmd64x_pci_tbl,
.probe = cmd64x_init_one,
@@ -516,12 +516,12 @@ static struct pci_driver driver = {

static int __init cmd64x_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&cmd64x_pci_driver);
}

static void __exit cmd64x_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&cmd64x_pci_driver);
}

module_init(cmd64x_ide_init);
diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c
index d6341f7..5efb467 100644
--- a/drivers/ide/pci/cs5520.c
+++ b/drivers/ide/pci/cs5520.c
@@ -145,7 +145,7 @@ static const struct pci_device_id cs5520_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, cs5520_pci_tbl);

-static struct pci_driver driver = {
+static struct pci_driver cs5520_pci_driver = {
.name = "Cyrix_IDE",
.id_table = cs5520_pci_tbl,
.probe = cs5520_init_one,
@@ -155,7 +155,7 @@ static struct pci_driver driver = {

static int __init cs5520_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&cs5520_pci_driver);
}

module_init(cs5520_ide_init);
diff --git a/drivers/ide/pci/cs5530.c b/drivers/ide/pci/cs5530.c
index da42fa7..53f079c 100644
--- a/drivers/ide/pci/cs5530.c
+++ b/drivers/ide/pci/cs5530.c
@@ -267,7 +267,7 @@ static const struct pci_device_id cs5530_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, cs5530_pci_tbl);

-static struct pci_driver driver = {
+static struct pci_driver cs5530_pci_driver = {
.name = "CS5530 IDE",
.id_table = cs5530_pci_tbl,
.probe = cs5530_init_one,
@@ -278,12 +278,12 @@ static struct pci_driver driver = {

static int __init cs5530_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&cs5530_pci_driver);
}

static void __exit cs5530_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&cs5530_pci_driver);
}

module_init(cs5530_ide_init);
diff --git a/drivers/ide/pci/cs5535.c b/drivers/ide/pci/cs5535.c
index 1e5bc59..983d957 100644
--- a/drivers/ide/pci/cs5535.c
+++ b/drivers/ide/pci/cs5535.c
@@ -76,7 +76,7 @@ static unsigned int cs5535_udma_timings[5] =
static void cs5535_set_speed(ide_drive_t *drive, const u8 speed)
{
u32 reg = 0, dummy;
- int unit = drive->select.b.unit;
+ u8 unit = drive->dn & 1;

/* Set the PIO timings */
if (speed < XFER_SW_DMA_0) {
@@ -192,7 +192,7 @@ static const struct pci_device_id cs5535_pci_tbl[] = {

MODULE_DEVICE_TABLE(pci, cs5535_pci_tbl);

-static struct pci_driver driver = {
+static struct pci_driver cs5535_pci_driver = {
.name = "CS5535_IDE",
.id_table = cs5535_pci_tbl,
.probe = cs5535_init_one,
@@ -203,12 +203,12 @@ static struct pci_driver driver = {

static int __init cs5535_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&cs5535_pci_driver);
}

static void __exit cs5535_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&cs5535_pci_driver);
}

module_init(cs5535_ide_init);
diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/pci/cy82c693.c
index 69820e9..5297f07 100644
--- a/drivers/ide/pci/cy82c693.c
+++ b/drivers/ide/pci/cy82c693.c
@@ -50,18 +50,11 @@

#define DRV_NAME "cy82c693"

-/* the current version */
-#define CY82_VERSION "CY82C693U driver v0.34 99-13-12 Andreas S. Krebs (akrebs@altavista.net)"
-
/*
* The following are used to debug the driver.
*/
-#define CY82C693_DEBUG_LOGS 0
#define CY82C693_DEBUG_INFO 0

-/* define CY82C693_SETDMA_CLOCK to set DMA Controller Clock Speed to ATCLK */
-#undef CY82C693_SETDMA_CLOCK
-
/*
* NOTE: the value for busmaster timeout is tricky and I got it by
* trial and error! By using a to low value will cause DMA timeouts
@@ -89,7 +82,6 @@
#define CY82_INDEX_PORT 0x22
#define CY82_DATA_PORT 0x23

-#define CY82_INDEX_CTRLREG1 0x01
#define CY82_INDEX_CHANNEL0 0x30
#define CY82_INDEX_CHANNEL1 0x31
#define CY82_INDEX_TIMEOUT 0x32
@@ -179,17 +171,6 @@ static void cy82c693_set_dma_mode(ide_drive_t *drive, const u8 mode)

index = hwif->channel ? CY82_INDEX_CHANNEL1 : CY82_INDEX_CHANNEL0;

-#if CY82C693_DEBUG_LOGS
- /* for debug let's show the previous values */
-
- outb(index, CY82_INDEX_PORT);
- data = inb(CY82_DATA_PORT);
-
- printk(KERN_INFO "%s (ch=%d, dev=%d): DMA mode is %d (single=%d)\n",
- drive->name, HWIF(drive)->channel, drive->select.b.unit,
- (data&0x3), ((data>>2)&1));
-#endif /* CY82C693_DEBUG_LOGS */
-
data = (mode & 3) | (single << 2);

outb(index, CY82_INDEX_PORT);
@@ -197,8 +178,7 @@ static void cy82c693_set_dma_mode(ide_drive_t *drive, const u8 mode)

#if CY82C693_DEBUG_INFO
printk(KERN_INFO "%s (ch=%d, dev=%d): set DMA mode to %d (single=%d)\n",
- drive->name, HWIF(drive)->channel, drive->select.b.unit,
- mode & 3, single);
+ drive->name, hwif->channel, drive->dn & 1, mode & 3, single);
#endif /* CY82C693_DEBUG_INFO */

/*
@@ -239,50 +219,11 @@ static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio)
}
}

-#if CY82C693_DEBUG_LOGS
- /* for debug let's show the register values */
-
- if (drive->select.b.unit == 0) {
- /*
- * get master drive registers
- * address setup control register
- * is 32 bit !!!
- */
- pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl);
- addrCtrl &= 0x0F;
-
- /* now let's get the remaining registers */
- pci_read_config_byte(dev, CY82_IDE_MASTER_IOR, &pclk.time_16r);
- pci_read_config_byte(dev, CY82_IDE_MASTER_IOW, &pclk.time_16w);
- pci_read_config_byte(dev, CY82_IDE_MASTER_8BIT, &pclk.time_8);
- } else {
- /*
- * set slave drive registers
- * address setup control register
- * is 32 bit !!!
- */
- pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl);
-
- addrCtrl &= 0xF0;
- addrCtrl >>= 4;
-
- /* now let's get the remaining registers */
- pci_read_config_byte(dev, CY82_IDE_SLAVE_IOR, &pclk.time_16r);
- pci_read_config_byte(dev, CY82_IDE_SLAVE_IOW, &pclk.time_16w);
- pci_read_config_byte(dev, CY82_IDE_SLAVE_8BIT, &pclk.time_8);
- }
-
- printk(KERN_INFO "%s (ch=%d, dev=%d): PIO timing is "
- "(addr=0x%X, ior=0x%X, iow=0x%X, 8bit=0x%X)\n",
- drive->name, hwif->channel, drive->select.b.unit,
- addrCtrl, pclk.time_16r, pclk.time_16w, pclk.time_8);
-#endif /* CY82C693_DEBUG_LOGS */
-
/* let's calc the values for this PIO mode */
compute_clocks(pio, &pclk);

/* now let's write the clocks registers */
- if (drive->select.b.unit == 0) {
+ if ((drive->dn & 1) == 0) {
/*
* set master drive
* address setup control register
@@ -324,63 +265,11 @@ static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio)
#if CY82C693_DEBUG_INFO
printk(KERN_INFO "%s (ch=%d, dev=%d): set PIO timing to "
"(addr=0x%X, ior=0x%X, iow=0x%X, 8bit=0x%X)\n",
- drive->name, hwif->channel, drive->select.b.unit,
+ drive->name, hwif->channel, drive->dn & 1,
addrCtrl, pclk.time_16r, pclk.time_16w, pclk.time_8);
#endif /* CY82C693_DEBUG_INFO */
}

-/*
- * this function is called during init and is used to setup the cy82c693 chip
- */
-static unsigned int init_chipset_cy82c693(struct pci_dev *dev)
-{
- if (PCI_FUNC(dev->devfn) != 1)
- return 0;
-
-#ifdef CY82C693_SETDMA_CLOCK
- u8 data = 0;
-#endif /* CY82C693_SETDMA_CLOCK */
-
- /* write info about this verion of the driver */
- printk(KERN_INFO CY82_VERSION "\n");
-
-#ifdef CY82C693_SETDMA_CLOCK
- /* okay let's set the DMA clock speed */
-
- outb(CY82_INDEX_CTRLREG1, CY82_INDEX_PORT);
- data = inb(CY82_DATA_PORT);
-
-#if CY82C693_DEBUG_INFO
- printk(KERN_INFO DRV_NAME ": Peripheral Configuration Register: 0x%X\n",
- data);
-#endif /* CY82C693_DEBUG_INFO */
-
- /*
- * for some reason sometimes the DMA controller
- * speed is set to ATCLK/2 ???? - we fix this here
- *
- * note: i don't know what causes this strange behaviour,
- * but even changing the dma speed doesn't solve it :-(
- * the ide performance is still only half the normal speed
- *
- * if anybody knows what goes wrong with my machine, please
- * let me know - ASK
- */
-
- data |= 0x03;
-
- outb(CY82_INDEX_CTRLREG1, CY82_INDEX_PORT);
- outb(data, CY82_DATA_PORT);
-
-#if CY82C693_DEBUG_INFO
- printk(KERN_INFO ": New Peripheral Configuration Register: 0x%X\n",
- data);
-#endif /* CY82C693_DEBUG_INFO */
-
-#endif /* CY82C693_SETDMA_CLOCK */
- return 0;
-}
-
static void __devinit init_iops_cy82c693(ide_hwif_t *hwif)
{
static ide_hwif_t *primary;
@@ -401,7 +290,6 @@ static const struct ide_port_ops cy82c693_port_ops = {

static const struct ide_port_info cy82c693_chipset __devinitdata = {
.name = DRV_NAME,
- .init_chipset = init_chipset_cy82c693,
.init_iops = init_iops_cy82c693,
.port_ops = &cy82c693_port_ops,
.chipset = ide_cy82c693,
@@ -443,7 +331,7 @@ static const struct pci_device_id cy82c693_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, cy82c693_pci_tbl);

-static struct pci_driver driver = {
+static struct pci_driver cy82c693_pci_driver = {
.name = "Cypress_IDE",
.id_table = cy82c693_pci_tbl,
.probe = cy82c693_init_one,
@@ -454,12 +342,12 @@ static struct pci_driver driver = {

static int __init cy82c693_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&cy82c693_pci_driver);
}

static void __exit cy82c693_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&cy82c693_pci_driver);
}

module_init(cy82c693_ide_init);
diff --git a/drivers/ide/pci/delkin_cb.c b/drivers/ide/pci/delkin_cb.c
index 83b63b3..8689a70 100644
--- a/drivers/ide/pci/delkin_cb.c
+++ b/drivers/ide/pci/delkin_cb.c
@@ -117,7 +117,7 @@ static struct pci_device_id delkin_cb_pci_tbl[] __devinitdata = {
};
MODULE_DEVICE_TABLE(pci, delkin_cb_pci_tbl);

-static struct pci_driver driver = {
+static struct pci_driver delkin_cb_pci_driver = {
.name = "Delkin-ASKA-Workbit Cardbus IDE",
.id_table = delkin_cb_pci_tbl,
.probe = delkin_cb_probe,
@@ -126,12 +126,12 @@ static struct pci_driver driver = {

static int __init delkin_cb_init(void)
{
- return pci_register_driver(&driver);
+ return pci_register_driver(&delkin_cb_pci_driver);
}

static void __exit delkin_cb_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&delkin_cb_pci_driver);
}

module_init(delkin_cb_init);
diff --git a/drivers/ide/pci/generic.c b/drivers/ide/pci/generic.c
index 092b238..474f96a 100644
--- a/drivers/ide/pci/generic.c
+++ b/drivers/ide/pci/generic.c
@@ -166,7 +166,7 @@ static const struct pci_device_id generic_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, generic_pci_tbl);

-static struct pci_driver driver = {
+static struct pci_driver generic_pci_driver = {
.name = "PCI_IDE",
.id_table = generic_pci_tbl,
.probe = generic_init_one,
@@ -177,12 +177,12 @@ static struct pci_driver driver = {

static int __init generic_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&generic_pci_driver);
}

static void __exit generic_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&generic_pci_driver);
}

module_init(generic_ide_init);
diff --git a/drivers/ide/pci/hpt34x.c b/drivers/ide/pci/hpt34x.c
index 644de29..fb1a3aa 100644
--- a/drivers/ide/pci/hpt34x.c
+++ b/drivers/ide/pci/hpt34x.c
@@ -166,7 +166,7 @@ static const struct pci_device_id hpt34x_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, hpt34x_pci_tbl);

-static struct pci_driver driver = {
+static struct pci_driver hpt34x_pci_driver = {
.name = "HPT34x_IDE",
.id_table = hpt34x_pci_tbl,
.probe = hpt34x_init_one,
@@ -177,12 +177,12 @@ static struct pci_driver driver = {

static int __init hpt34x_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&hpt34x_pci_driver);
}

static void __exit hpt34x_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&hpt34x_pci_driver);
}

module_init(hpt34x_ide_init);
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index a194022..9cf171c 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -835,7 +835,7 @@ static int hpt370_dma_end(ide_drive_t *drive)
if (dma_stat & 0x01)
hpt370_irq_timeout(drive);
}
- return __ide_dma_end(drive);
+ return ide_dma_end(drive);
}

static void hpt370_dma_timeout(ide_drive_t *drive)
@@ -863,9 +863,6 @@ static int hpt374_dma_test_irq(ide_drive_t *drive)
if (dma_stat & 4)
return 1;

- if (!drive->waiting_for_dma)
- printk(KERN_WARNING "%s: (%s) called while not waiting\n",
- drive->name, __func__);
return 0;
}

@@ -880,7 +877,7 @@ static int hpt374_dma_end(ide_drive_t *drive)
pci_read_config_byte(dev, mcr_addr, &mcr);
if (bwsr & mask)
pci_write_config_byte(dev, mcr_addr, mcr | 0x30);
- return __ide_dma_end(drive);
+ return ide_dma_end(drive);
}

/**
@@ -1456,7 +1453,7 @@ static const struct ide_dma_ops hpt36x_dma_ops = {
.dma_setup = ide_dma_setup,
.dma_exec_cmd = ide_dma_exec_cmd,
.dma_start = ide_dma_start,
- .dma_end = __ide_dma_end,
+ .dma_end = ide_dma_end,
.dma_test_irq = ide_dma_test_irq,
.dma_lost_irq = hpt366_dma_lost_irq,
.dma_timeout = ide_dma_timeout,
@@ -1622,7 +1619,7 @@ static const struct pci_device_id hpt366_pci_tbl[] __devinitconst = {
};
MODULE_DEVICE_TABLE(pci, hpt366_pci_tbl);

-static struct pci_driver driver = {
+static struct pci_driver hpt366_pci_driver = {
.name = "HPT366_IDE",
.id_table = hpt366_pci_tbl,
.probe = hpt366_init_one,
@@ -1633,12 +1630,12 @@ static struct pci_driver driver = {

static int __init hpt366_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&hpt366_pci_driver);
}

static void __exit hpt366_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&hpt366_pci_driver);
}

module_init(hpt366_ide_init);
diff --git a/drivers/ide/pci/it8213.c b/drivers/ide/pci/it8213.c
index 0954ccd..7c2feeb 100644
--- a/drivers/ide/pci/it8213.c
+++ b/drivers/ide/pci/it8213.c
@@ -189,7 +189,7 @@ static const struct pci_device_id it8213_pci_tbl[] = {

MODULE_DEVICE_TABLE(pci, it8213_pci_tbl);

-static struct pci_driver driver = {
+static struct pci_driver it8213_pci_driver = {
.name = "ITE8213_IDE",
.id_table = it8213_pci_tbl,
.probe = it8213_init_one,
@@ -200,12 +200,12 @@ static struct pci_driver driver = {

static int __init it8213_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&it8213_pci_driver);
}

static void __exit it8213_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&it8213_pci_driver);
}

module_init(it8213_ide_init);
diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c
index 46edd08..995e18b 100644
--- a/drivers/ide/pci/it821x.c
+++ b/drivers/ide/pci/it821x.c
@@ -138,8 +138,7 @@ static void it821x_program_udma(ide_drive_t *drive, u16 timing)
struct pci_dev *dev = to_pci_dev(hwif->dev);
struct it821x_dev *itdev = ide_get_hwifdata(hwif);
int channel = hwif->channel;
- int unit = drive->select.b.unit;
- u8 conf;
+ u8 unit = drive->dn & 1, conf;

/* Program UDMA timing bits */
if(itdev->clock_mode == ATA_66)
@@ -168,13 +167,11 @@ static void it821x_clock_strategy(ide_drive_t *drive)
ide_hwif_t *hwif = drive->hwif;
struct pci_dev *dev = to_pci_dev(hwif->dev);
struct it821x_dev *itdev = ide_get_hwifdata(hwif);
+ ide_drive_t *pair;
+ int clock, altclock, sel = 0;
+ u8 unit = drive->dn & 1, v;

- u8 unit = drive->select.b.unit;
- ide_drive_t *pair = &hwif->drives[1-unit];
-
- int clock, altclock;
- u8 v;
- int sel = 0;
+ pair = &hwif->drives[1 - unit];

if(itdev->want[0][0] > itdev->want[1][0]) {
clock = itdev->want[0][1];
@@ -240,16 +237,17 @@ static void it821x_clock_strategy(ide_drive_t *drive)

static void it821x_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- ide_hwif_t *hwif = drive->hwif;
+ ide_hwif_t *hwif = drive->hwif;
struct it821x_dev *itdev = ide_get_hwifdata(hwif);
- int unit = drive->select.b.unit;
- ide_drive_t *pair = &hwif->drives[1 - unit];
- u8 set_pio = pio;
+ ide_drive_t *pair;
+ u8 unit = drive->dn & 1, set_pio = pio;

/* Spec says 89 ref driver uses 88 */
static u16 pio_timings[]= { 0xAA88, 0xA382, 0xA181, 0x3332, 0x3121 };
static u8 pio_want[] = { ATA_66, ATA_66, ATA_66, ATA_66, ATA_ANY };

+ pair = &hwif->drives[1 - unit];
+
/*
* Compute the best PIO mode we can for a given device. We must
* pick a speed that does not cause problems with the other device
@@ -286,9 +284,7 @@ static void it821x_tune_mwdma (ide_drive_t *drive, byte mode_wanted)
ide_hwif_t *hwif = drive->hwif;
struct pci_dev *dev = to_pci_dev(hwif->dev);
struct it821x_dev *itdev = (void *)ide_get_hwifdata(hwif);
- int unit = drive->select.b.unit;
- int channel = hwif->channel;
- u8 conf;
+ u8 unit = drive->dn & 1, channel = hwif->channel, conf;

static u16 dma[] = { 0x8866, 0x3222, 0x3121 };
static u8 mwdma_want[] = { ATA_ANY, ATA_66, ATA_ANY };
@@ -325,9 +321,7 @@ static void it821x_tune_udma (ide_drive_t *drive, byte mode_wanted)
ide_hwif_t *hwif = drive->hwif;
struct pci_dev *dev = to_pci_dev(hwif->dev);
struct it821x_dev *itdev = ide_get_hwifdata(hwif);
- int unit = drive->select.b.unit;
- int channel = hwif->channel;
- u8 conf;
+ u8 unit = drive->dn & 1, channel = hwif->channel, conf;

static u16 udma[] = { 0x4433, 0x4231, 0x3121, 0x2121, 0x1111, 0x2211, 0x1111 };
static u8 udma_want[] = { ATA_ANY, ATA_50, ATA_ANY, ATA_66, ATA_66, ATA_50, ATA_66 };
@@ -369,7 +363,8 @@ static void it821x_dma_start(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
struct it821x_dev *itdev = ide_get_hwifdata(hwif);
- int unit = drive->select.b.unit;
+ u8 unit = drive->dn & 1;
+
if(itdev->mwdma[unit] != MWDMA_OFF)
it821x_program(drive, itdev->mwdma[unit]);
else if(itdev->udma[unit] != UDMA_OFF && itdev->timing10)
@@ -389,9 +384,10 @@ static void it821x_dma_start(ide_drive_t *drive)
static int it821x_dma_end(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
- int unit = drive->select.b.unit;
struct it821x_dev *itdev = ide_get_hwifdata(hwif);
- int ret = __ide_dma_end(drive);
+ int ret = ide_dma_end(drive);
+ u8 unit = drive->dn & 1;
+
if(itdev->mwdma[unit] != MWDMA_OFF)
it821x_program(drive, itdev->pio[unit]);
return ret;
@@ -454,7 +450,7 @@ static void it821x_quirkproc(ide_drive_t *drive)
* IRQ mask as we may well be in PIO (eg rev 0x10)
* for now and we know unmasking is safe on this chipset.
*/
- drive->unmask = 1;
+ drive->dev_flags |= IDE_DFLAG_UNMASK;
} else {
/*
* Perform fixups on smart mode. We need to "lose" some
@@ -680,7 +676,7 @@ static const struct pci_device_id it821x_pci_tbl[] = {

MODULE_DEVICE_TABLE(pci, it821x_pci_tbl);

-static struct pci_driver driver = {
+static struct pci_driver it821x_pci_driver = {
.name = "ITE821x IDE",
.id_table = it821x_pci_tbl,
.probe = it821x_init_one,
@@ -691,12 +687,12 @@ static struct pci_driver driver = {

static int __init it821x_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&it821x_pci_driver);
}

static void __exit it821x_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&it821x_pci_driver);
}

module_init(it821x_ide_init);
diff --git a/drivers/ide/pci/jmicron.c b/drivers/ide/pci/jmicron.c
index acd6471..9a68433 100644
--- a/drivers/ide/pci/jmicron.c
+++ b/drivers/ide/pci/jmicron.c
@@ -149,7 +149,7 @@ static struct pci_device_id jmicron_pci_tbl[] = {

MODULE_DEVICE_TABLE(pci, jmicron_pci_tbl);

-static struct pci_driver driver = {
+static struct pci_driver jmicron_pci_driver = {
.name = "JMicron IDE",
.id_table = jmicron_pci_tbl,
.probe = jmicron_init_one,
@@ -160,12 +160,12 @@ static struct pci_driver driver = {

static int __init jmicron_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&jmicron_pci_driver);
}

static void __exit jmicron_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&jmicron_pci_driver);
}

module_init(jmicron_ide_init);
diff --git a/drivers/ide/pci/ns87415.c b/drivers/ide/pci/ns87415.c
index 53bd645..1378906 100644
--- a/drivers/ide/pci/ns87415.c
+++ b/drivers/ide/pci/ns87415.c
@@ -137,7 +137,7 @@ static void __devinit superio_init_iops(struct hwif_s *hwif)
static unsigned int ns87415_count = 0, ns87415_control[MAX_HWIFS] = { 0 };

/*
- * This routine either enables/disables (according to drive->present)
+ * This routine either enables/disables (according to IDE_DFLAG_PRESENT)
* the IRQ associated with the port (HWIF(drive)),
* and selects either PIO or DMA handshaking for the next I/O operation.
*/
@@ -153,11 +153,15 @@ static void ns87415_prepare_drive (ide_drive_t *drive, unsigned int use_dma)

/* Adjust IRQ enable bit */
bit = 1 << (8 + hwif->channel);
- new = drive->present ? (new & ~bit) : (new | bit);
+
+ if (drive->dev_flags & IDE_DFLAG_PRESENT)
+ new &= ~bit;
+ else
+ new |= bit;

/* Select PIO or DMA, DMA may only be selected for one drive/channel. */
- bit = 1 << (20 + drive->select.b.unit + (hwif->channel << 1));
- other = 1 << (20 + (1 - drive->select.b.unit) + (hwif->channel << 1));
+ bit = 1 << (20 + (drive->dn & 1) + (hwif->channel << 1));
+ other = 1 << (20 + (1 - (drive->dn & 1)) + (hwif->channel << 1));
new = use_dma ? ((new & ~other) | bit) : (new & ~bit);

if (new != *old) {
@@ -187,7 +191,8 @@ static void ns87415_prepare_drive (ide_drive_t *drive, unsigned int use_dma)

static void ns87415_selectproc (ide_drive_t *drive)
{
- ns87415_prepare_drive (drive, drive->using_dma);
+ ns87415_prepare_drive(drive,
+ !!(drive->dev_flags & IDE_DFLAG_USING_DMA));
}

static int ns87415_dma_end(ide_drive_t *drive)
@@ -334,7 +339,7 @@ static const struct pci_device_id ns87415_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, ns87415_pci_tbl);

-static struct pci_driver driver = {
+static struct pci_driver ns87415_pci_driver = {
.name = "NS87415_IDE",
.id_table = ns87415_pci_tbl,
.probe = ns87415_init_one,
@@ -345,12 +350,12 @@ static struct pci_driver driver = {

static int __init ns87415_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&ns87415_pci_driver);
}

static void __exit ns87415_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&ns87415_pci_driver);
}

module_init(ns87415_ide_init);
diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c
index 3de11dd..6048eda 100644
--- a/drivers/ide/pci/opti621.c
+++ b/drivers/ide/pci/opti621.c
@@ -179,7 +179,7 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio)
misc = addr_timings[clk][addr_pio];

/* select Index-0/1 for Register-A/B */
- write_reg(drive->select.b.unit, MISC_REG);
+ write_reg(drive->dn & 1, MISC_REG);
/* set read cycle timings */
write_reg(tim, READ_REG);
/* set write cycle timings */
@@ -220,7 +220,7 @@ static const struct pci_device_id opti621_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, opti621_pci_tbl);

-static struct pci_driver driver = {
+static struct pci_driver opti621_pci_driver = {
.name = "Opti621_IDE",
.id_table = opti621_pci_tbl,
.probe = opti621_init_one,
@@ -231,12 +231,12 @@ static struct pci_driver driver = {

static int __init opti621_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&opti621_pci_driver);
}

static void __exit opti621_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&opti621_pci_driver);
}

module_init(opti621_ide_init);
diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c
index 9fc5996..211ae46 100644
--- a/drivers/ide/pci/pdc202xx_new.c
+++ b/drivers/ide/pci/pdc202xx_new.c
@@ -561,7 +561,7 @@ static const struct pci_device_id pdc202new_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, pdc202new_pci_tbl);

-static struct pci_driver driver = {
+static struct pci_driver pdc202new_pci_driver = {
.name = "Promise_IDE",
.id_table = pdc202new_pci_tbl,
.probe = pdc202new_init_one,
@@ -572,12 +572,12 @@ static struct pci_driver driver = {

static int __init pdc202new_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&pdc202new_pci_driver);
}

static void __exit pdc202new_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&pdc202new_pci_driver);
}

module_init(pdc202new_ide_init);
diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c
index cb6d2a0..799557c 100644
--- a/drivers/ide/pci/pdc202xx_old.c
+++ b/drivers/ide/pci/pdc202xx_old.c
@@ -168,7 +168,7 @@ static void pdc202xx_dma_start(ide_drive_t *drive)
{
if (drive->current_speed > XFER_UDMA_2)
pdc_old_enable_66MHz_clock(drive->hwif);
- if (drive->media != ide_disk || drive->addressing == 1) {
+ if (drive->media != ide_disk || (drive->dev_flags & IDE_DFLAG_LBA48)) {
struct request *rq = HWGROUP(drive)->rq;
ide_hwif_t *hwif = HWIF(drive);
unsigned long high_16 = hwif->extra_base - 16;
@@ -188,7 +188,7 @@ static void pdc202xx_dma_start(ide_drive_t *drive)

static int pdc202xx_dma_end(ide_drive_t *drive)
{
- if (drive->media != ide_disk || drive->addressing == 1) {
+ if (drive->media != ide_disk || (drive->dev_flags & IDE_DFLAG_LBA48)) {
ide_hwif_t *hwif = HWIF(drive);
unsigned long high_16 = hwif->extra_base - 16;
unsigned long atapi_reg = high_16 + (hwif->channel ? 0x24 : 0x20);
@@ -200,7 +200,7 @@ static int pdc202xx_dma_end(ide_drive_t *drive)
}
if (drive->current_speed > XFER_UDMA_2)
pdc_old_disable_66MHz_clock(drive->hwif);
- return __ide_dma_end(drive);
+ return ide_dma_end(drive);
}

static int pdc202xx_dma_test_irq(ide_drive_t *drive)
@@ -333,7 +333,7 @@ static const struct ide_dma_ops pdc20246_dma_ops = {
.dma_setup = ide_dma_setup,
.dma_exec_cmd = ide_dma_exec_cmd,
.dma_start = ide_dma_start,
- .dma_end = __ide_dma_end,
+ .dma_end = ide_dma_end,
.dma_test_irq = pdc202xx_dma_test_irq,
.dma_lost_irq = pdc202xx_dma_lost_irq,
.dma_timeout = pdc202xx_dma_timeout,
@@ -426,7 +426,7 @@ static const struct pci_device_id pdc202xx_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, pdc202xx_pci_tbl);

-static struct pci_driver driver = {
+static struct pci_driver pdc202xx_pci_driver = {
.name = "Promise_Old_IDE",
.id_table = pdc202xx_pci_tbl,
.probe = pdc202xx_init_one,
@@ -437,12 +437,12 @@ static struct pci_driver driver = {

static int __init pdc202xx_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&pdc202xx_pci_driver);
}

static void __exit pdc202xx_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&pdc202xx_pci_driver);
}

module_init(pdc202xx_ide_init);
diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c
index a06c03f..d63f9fd 100644
--- a/drivers/ide/pci/piix.c
+++ b/drivers/ide/pci/piix.c
@@ -215,17 +215,26 @@ static unsigned int init_chipset_ich(struct pci_dev *dev)
}

/**
- * piix_dma_clear_irq - clear BMDMA status
- * @drive: IDE drive to clear
+ * ich_clear_irq - clear BMDMA status
+ * @drive: IDE drive
*
- * Called from ide_intr() for PIO interrupts
- * to clear BMDMA status as needed by ICHx
+ * ICHx contollers set DMA INTR no matter DMA or PIO.
+ * BMDMA status might need to be cleared even for
+ * PIO interrupts to prevent spurious/lost IRQ.
*/
-static void piix_dma_clear_irq(ide_drive_t *drive)
+static void ich_clear_irq(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
u8 dma_stat;

+ /*
+ * ide_dma_end() needs BMDMA status for error checking.
+ * So, skip clearing BMDMA status here and leave it
+ * to ide_dma_end() if this is DMA interrupt.
+ */
+ if (drive->waiting_for_dma || hwif->dma_base == 0)
+ return;
+
/* clear the INTR & ERROR bits */
dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS);
/* Should we force the bit as well ? */
@@ -249,6 +258,7 @@ static const struct ich_laptop ich_laptop[] = {
{ 0x27DF, 0x1025, 0x0110 }, /* ICH7 on Acer 3682WLMi */
{ 0x27DF, 0x1043, 0x1267 }, /* ICH7 on Asus W5F */
{ 0x27DF, 0x103C, 0x30A1 }, /* ICH7 on HP Compaq nc2400 */
+ { 0x27DF, 0x1071, 0xD221 }, /* ICH7 on Hercules EC-900 */
{ 0x24CA, 0x1025, 0x0061 }, /* ICH4 on Acer Aspire 2023WLMi */
{ 0x2653, 0x1043, 0x82D8 }, /* ICH6M on Asus Eee 701 */
/* end marker */
@@ -293,21 +303,19 @@ static void __devinit init_hwif_piix(ide_hwif_t *hwif)
hwif->ultra_mask = hwif->mwdma_mask = hwif->swdma_mask = 0;
}

-static void __devinit init_hwif_ich(ide_hwif_t *hwif)
-{
- init_hwif_piix(hwif);
-
- /* ICHx need to clear the BMDMA status for all interrupts */
- if (hwif->dma_base)
- hwif->ide_dma_clear_irq = &piix_dma_clear_irq;
-}
-
static const struct ide_port_ops piix_port_ops = {
.set_pio_mode = piix_set_pio_mode,
.set_dma_mode = piix_set_dma_mode,
.cable_detect = piix_cable_detect,
};

+static const struct ide_port_ops ich_port_ops = {
+ .set_pio_mode = piix_set_pio_mode,
+ .set_dma_mode = piix_set_dma_mode,
+ .clear_irq = ich_clear_irq,
+ .cable_detect = piix_cable_detect,
+};
+
#ifndef CONFIG_IA64
#define IDE_HFLAGS_PIIX IDE_HFLAG_LEGACY_IRQS
#else
@@ -331,9 +339,9 @@ static const struct ide_port_ops piix_port_ops = {
{ \
.name = DRV_NAME, \
.init_chipset = init_chipset_ich, \
- .init_hwif = init_hwif_ich, \
+ .init_hwif = init_hwif_piix, \
.enablebits = {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, \
- .port_ops = &piix_port_ops, \
+ .port_ops = &ich_port_ops, \
.host_flags = IDE_HFLAGS_PIIX, \
.pio_mask = ATA_PIO4, \
.swdma_mask = ATA_SWDMA2_ONLY, \
@@ -444,7 +452,7 @@ static const struct pci_device_id piix_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, piix_pci_tbl);

-static struct pci_driver driver = {
+static struct pci_driver piix_pci_driver = {
.name = "PIIX_IDE",
.id_table = piix_pci_tbl,
.probe = piix_init_one,
@@ -456,12 +464,12 @@ static struct pci_driver driver = {
static int __init piix_ide_init(void)
{
piix_check_450nx();
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&piix_pci_driver);
}

static void __exit piix_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&piix_pci_driver);
}

module_init(piix_ide_init);
diff --git a/drivers/ide/pci/rz1000.c b/drivers/ide/pci/rz1000.c
index c117a06..7daf013 100644
--- a/drivers/ide/pci/rz1000.c
+++ b/drivers/ide/pci/rz1000.c
@@ -59,7 +59,7 @@ static const struct pci_device_id rz1000_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, rz1000_pci_tbl);

-static struct pci_driver driver = {
+static struct pci_driver rz1000_pci_driver = {
.name = "RZ1000_IDE",
.id_table = rz1000_pci_tbl,
.probe = rz1000_init_one,
@@ -68,12 +68,12 @@ static struct pci_driver driver = {

static int __init rz1000_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&rz1000_pci_driver);
}

static void __exit rz1000_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&rz1000_pci_driver);
}

module_init(rz1000_ide_init);
diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/pci/sc1200.c
index bdc1fed..f1a8758 100644
--- a/drivers/ide/pci/sc1200.c
+++ b/drivers/ide/pci/sc1200.c
@@ -126,7 +126,6 @@ static void sc1200_set_dma_mode(ide_drive_t *drive, const u8 mode)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = to_pci_dev(hwif->dev);
- int unit = drive->select.b.unit;
unsigned int reg, timings;
unsigned short pci_clock;
unsigned int basereg = hwif->channel ? 0x50 : 0x40;
@@ -155,7 +154,7 @@ static void sc1200_set_dma_mode(ide_drive_t *drive, const u8 mode)
else
timings = mwdma_timing[pci_clock][mode - XFER_MW_DMA_0];

- if (unit == 0) { /* are we configuring drive0? */
+ if ((drive->dn & 1) == 0) {
pci_read_config_dword(dev, basereg + 4, &reg);
timings |= reg & 0x80000000; /* preserve PIO format bit */
pci_write_config_dword(dev, basereg + 4, timings);
@@ -216,7 +215,8 @@ static void sc1200_set_pio_mode(ide_drive_t *drive, const u8 pio)
if (mode != -1) {
printk("SC1200: %s: changing (U)DMA mode\n", drive->name);
ide_dma_off_quietly(drive);
- if (ide_set_dma_mode(drive, mode) == 0 && drive->using_dma)
+ if (ide_set_dma_mode(drive, mode) == 0 &&
+ (drive->dev_flags & IDE_DFLAG_USING_DMA))
hwif->dma_ops->dma_host_set(drive, 1);
return;
}
@@ -328,7 +328,7 @@ static const struct pci_device_id sc1200_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, sc1200_pci_tbl);

-static struct pci_driver driver = {
+static struct pci_driver sc1200_pci_driver = {
.name = "SC1200_IDE",
.id_table = sc1200_pci_tbl,
.probe = sc1200_init_one,
@@ -341,12 +341,12 @@ static struct pci_driver driver = {

static int __init sc1200_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&sc1200_pci_driver);
}

static void __exit sc1200_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&sc1200_pci_driver);
}

module_init(sc1200_ide_init);
diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c
index e92a874..9ce1d80 100644
--- a/drivers/ide/pci/scc_pata.c
+++ b/drivers/ide/pci/scc_pata.c
@@ -291,7 +291,7 @@ static void scc_set_dma_mode(ide_drive_t *drive, const u8 speed)
static void scc_dma_host_set(ide_drive_t *drive, int on)
{
ide_hwif_t *hwif = drive->hwif;
- u8 unit = (drive->select.b.unit & 0x01);
+ u8 unit = drive->dn & 1;
u8 dma_stat = scc_ide_inb(hwif->dma_base + 4);

if (on)
@@ -353,7 +353,6 @@ static void scc_dma_start(ide_drive_t *drive)

/* start DMA */
scc_ide_outb(dma_cmd | 1, hwif->dma_base);
- hwif->dma = 1;
wmb();
}

@@ -374,7 +373,6 @@ static int __scc_dma_end(ide_drive_t *drive)
/* purge DMA mappings */
ide_destroy_dmatable(drive);
/* verify good DMA status */
- hwif->dma = 0;
wmb();
return (dma_stat & 7) != 4 ? (0x10 | dma_stat) : 0;
}
@@ -511,9 +509,6 @@ static int scc_dma_test_irq(ide_drive_t *drive)
if (int_stat & INTSTS_IOIRQS)
return 1;

- if (!drive->waiting_for_dma)
- printk(KERN_WARNING "%s: (%s) called while not waiting\n",
- drive->name, __func__);
return 0;
}

@@ -710,7 +705,7 @@ static void scc_tf_load(ide_drive_t *drive, ide_task_t *task)
scc_ide_outb(tf->lbah, io_ports->lbah_addr);

if (task->tf_flags & IDE_TFLAG_OUT_DEVICE)
- scc_ide_outb((tf->device & HIHI) | drive->select.all,
+ scc_ide_outb((tf->device & HIHI) | drive->select,
io_ports->device_addr);
}

@@ -826,6 +821,12 @@ static void __devinit init_iops_scc(ide_hwif_t *hwif)
init_mmio_iops_scc(hwif);
}

+static int __devinit scc_init_dma(ide_hwif_t *hwif,
+ const struct ide_port_info *d)
+{
+ return ide_allocate_dma_engine(hwif);
+}
+
static u8 scc_cable_detect(ide_hwif_t *hwif)
{
return ATA_CBL_PATA80;
@@ -890,6 +891,7 @@ static const struct ide_dma_ops scc_dma_ops = {
{ \
.name = name_str, \
.init_iops = init_iops_scc, \
+ .init_dma = scc_init_dma, \
.init_hwif = init_hwif_scc, \
.tp_ops = &scc_tp_ops, \
.port_ops = &scc_port_ops, \
@@ -927,13 +929,6 @@ static void __devexit scc_remove(struct pci_dev *dev)
{
struct scc_ports *ports = pci_get_drvdata(dev);
struct ide_host *host = ports->host;
- ide_hwif_t *hwif = host->ports[0];
-
- if (hwif->dmatable_cpu) {
- pci_free_consistent(dev, PRD_ENTRIES * PRD_BYTES,
- hwif->dmatable_cpu, hwif->dmatable_dma);
- hwif->dmatable_cpu = NULL;
- }

ide_host_remove(host);

@@ -949,7 +944,7 @@ static const struct pci_device_id scc_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, scc_pci_tbl);

-static struct pci_driver driver = {
+static struct pci_driver scc_pci_driver = {
.name = "SCC IDE",
.id_table = scc_pci_tbl,
.probe = scc_init_one,
@@ -958,14 +953,14 @@ static struct pci_driver driver = {

static int scc_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&scc_pci_driver);
}

module_init(scc_ide_init);
/* -- No exit code?
static void scc_ide_exit(void)
{
- ide_pci_unregister_driver(&driver);
+ ide_pci_unregister_driver(&scc_pci_driver);
}
module_exit(scc_ide_exit);
*/
diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c
index 3dff2ae..437bc91 100644
--- a/drivers/ide/pci/serverworks.c
+++ b/drivers/ide/pci/serverworks.c
@@ -153,7 +153,7 @@ static void svwks_set_dma_mode(ide_drive_t *drive, const u8 speed)

ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = to_pci_dev(hwif->dev);
- u8 unit = (drive->select.b.unit & 0x01);
+ u8 unit = drive->dn & 1;

u8 ultra_enable = 0, ultra_timing = 0, dma_timing = 0;

@@ -443,7 +443,7 @@ static const struct pci_device_id svwks_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, svwks_pci_tbl);

-static struct pci_driver driver = {
+static struct pci_driver svwks_pci_driver = {
.name = "Serverworks_IDE",
.id_table = svwks_pci_tbl,
.probe = svwks_init_one,
@@ -454,12 +454,12 @@ static struct pci_driver driver = {

static int __init svwks_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&svwks_pci_driver);
}

static void __exit svwks_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&svwks_pci_driver);
}

module_init(svwks_ide_init);
diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c
index 1017fb4..dd63454 100644
--- a/drivers/ide/pci/sgiioc4.c
+++ b/drivers/ide/pci/sgiioc4.c
@@ -1,5 +1,6 @@
/*
* Copyright (c) 2003-2006 Silicon Graphics, Inc. All Rights Reserved.
+ * Copyright (C) 2008 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License
@@ -150,7 +151,7 @@ sgiioc4_clearirq(ide_drive_t * drive)
int count = 0;

stat = sgiioc4_read_status(hwif);
- while ((stat & 0x80) && (count++ < 100)) {
+ while ((stat & ATA_BUSY) && (count++ < 100)) {
udelay(1);
stat = sgiioc4_read_status(hwif);
}
@@ -310,7 +311,7 @@ static u8 sgiioc4_read_status(ide_hwif_t *hwif)
u8 reg = (u8) readb((void __iomem *) port);

if ((port & 0xFFF) == 0x11C) { /* Status register of IOC4 */
- if (reg & 0x51) { /* Not busy...check for interrupt */
+ if (!(reg & ATA_BUSY)) { /* Not busy... check for interrupt */
unsigned long other_ir = port - 0x110;
unsigned int intr_reg = (u32) readl((void __iomem *) other_ir);

@@ -338,35 +339,31 @@ ide_dma_sgiioc4(ide_hwif_t *hwif, const struct ide_port_info *d)
if (dma_base == 0)
return -1;

- printk(KERN_INFO "%s: BM-DMA at 0x%04lx-0x%04lx\n", hwif->name,
- dma_base, dma_base + num_ports - 1);
+ printk(KERN_INFO " %s: MMIO-DMA\n", hwif->name);

- if (!request_mem_region(dma_base, num_ports, hwif->name)) {
- printk(KERN_ERR
- "%s(%s) -- ERROR, Addresses 0x%p to 0x%p "
- "ALREADY in use\n",
- __func__, hwif->name, (void *) dma_base,
- (void *) dma_base + num_ports - 1);
+ if (request_mem_region(dma_base, num_ports, hwif->name) == NULL) {
+ printk(KERN_ERR "%s(%s) -- ERROR: addresses 0x%08lx to 0x%08lx "
+ "already in use\n", __func__, hwif->name,
+ dma_base, dma_base + num_ports - 1);
return -1;
}

virt_dma_base = ioremap(dma_base, num_ports);
if (virt_dma_base == NULL) {
- printk(KERN_ERR
- "%s(%s) -- ERROR, Unable to map addresses 0x%lx to 0x%lx\n",
- __func__, hwif->name, dma_base, dma_base + num_ports - 1);
+ printk(KERN_ERR "%s(%s) -- ERROR: unable to map addresses "
+ "0x%lx to 0x%lx\n", __func__, hwif->name,
+ dma_base, dma_base + num_ports - 1);
goto dma_remap_failure;
}
hwif->dma_base = (unsigned long) virt_dma_base;

- hwif->dmatable_cpu = pci_alloc_consistent(dev,
- IOC4_PRD_ENTRIES * IOC4_PRD_BYTES,
- &hwif->dmatable_dma);
+ hwif->sg_max_nents = IOC4_PRD_ENTRIES;

- if (!hwif->dmatable_cpu)
- goto dma_pci_alloc_failure;
+ hwif->prd_max_nents = IOC4_PRD_ENTRIES;
+ hwif->prd_ent_size = IOC4_PRD_BYTES;

- hwif->sg_max_nents = IOC4_PRD_ENTRIES;
+ if (ide_allocate_dma_engine(hwif))
+ goto dma_pci_alloc_failure;

pad = pci_alloc_consistent(dev, IOC4_IDE_CACHELINE_SIZE,
(dma_addr_t *)&hwif->extra_base);
@@ -375,13 +372,11 @@ ide_dma_sgiioc4(ide_hwif_t *hwif, const struct ide_port_info *d)
return 0;
}

- pci_free_consistent(dev, IOC4_PRD_ENTRIES * IOC4_PRD_BYTES,
- hwif->dmatable_cpu, hwif->dmatable_dma);
- printk(KERN_INFO
- "%s() -- Error! Unable to allocate DMA Maps for drive %s\n",
+ ide_release_dma_engine(hwif);
+
+ printk(KERN_ERR "%s(%s) -- ERROR: Unable to allocate DMA maps\n",
__func__, hwif->name);
- printk(KERN_INFO
- "Changing from DMA to PIO mode for Drive %s\n", hwif->name);
+ printk(KERN_INFO "%s: changing from DMA to PIO mode", hwif->name);

dma_pci_alloc_failure:
iounmap(virt_dma_base);
@@ -617,14 +612,12 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
irqport = (unsigned long) virt_base + IOC4_INTR_OFFSET;

cmd_phys_base = bar0 + IOC4_CMD_OFFSET;
- if (!request_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE,
- DRV_NAME)) {
- printk(KERN_ERR
- "%s %s: -- ERROR, Addresses "
- "0x%p to 0x%p ALREADY in use\n",
- DRV_NAME, pci_name(dev), (void *)cmd_phys_base,
- (void *) cmd_phys_base + IOC4_CMD_CTL_BLK_SIZE);
- return -ENOMEM;
+ if (request_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE,
+ DRV_NAME) == NULL) {
+ printk(KERN_ERR "%s %s -- ERROR: addresses 0x%08lx to 0x%08lx "
+ "already in use\n", DRV_NAME, pci_name(dev),
+ cmd_phys_base, cmd_phys_base + IOC4_CMD_CTL_BLK_SIZE);
+ return -EBUSY;
}

/* Initialize the IO registers */
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index 174a873..eb4faf9 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -116,13 +116,14 @@ static inline unsigned long siimage_seldev(ide_drive_t *drive, int r)
{
ide_hwif_t *hwif = HWIF(drive);
unsigned long base = (unsigned long)hwif->hwif_data;
+ u8 unit = drive->dn & 1;

base += 0xA0 + r;
if (hwif->host_flags & IDE_HFLAG_MMIO)
base += hwif->channel << 6;
else
base += hwif->channel << 4;
- base |= drive->select.b.unit << drive->select.b.unit;
+ base |= unit << unit;
return base;
}

@@ -255,7 +256,7 @@ static void sil_set_pio_mode(ide_drive_t *drive, u8 pio)
u8 addr_mask = hwif->channel ? (mmio ? 0xF4 : 0x84)
: (mmio ? 0xB4 : 0x80);
u8 mode = 0;
- u8 unit = drive->select.b.unit;
+ u8 unit = drive->dn & 1;

/* trim *taskfile* PIO to the slowest of the master/slave */
if (pair) {
@@ -301,9 +302,9 @@ static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed)

ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = to_pci_dev(hwif->dev);
- u16 ultra = 0, multi = 0;
- u8 mode = 0, unit = drive->select.b.unit;
unsigned long base = (unsigned long)hwif->hwif_data;
+ u16 ultra = 0, multi = 0;
+ u8 mode = 0, unit = drive->dn & 1;
u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
u8 scsc = 0, addr_mask = hwif->channel ? (mmio ? 0xF4 : 0x84)
: (mmio ? 0xB4 : 0x80);
@@ -712,7 +713,7 @@ static const struct ide_dma_ops sil_dma_ops = {
.dma_setup = ide_dma_setup,
.dma_exec_cmd = ide_dma_exec_cmd,
.dma_start = ide_dma_start,
- .dma_end = __ide_dma_end,
+ .dma_end = ide_dma_end,
.dma_test_irq = siimage_dma_test_irq,
.dma_timeout = ide_dma_timeout,
.dma_lost_irq = ide_dma_lost_irq,
@@ -829,7 +830,7 @@ static const struct pci_device_id siimage_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, siimage_pci_tbl);

-static struct pci_driver driver = {
+static struct pci_driver siimage_pci_driver = {
.name = "SiI_IDE",
.id_table = siimage_pci_tbl,
.probe = siimage_init_one,
@@ -840,12 +841,12 @@ static struct pci_driver driver = {

static int __init siimage_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&siimage_pci_driver);
}

static void __exit siimage_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&siimage_pci_driver);
}

module_init(siimage_ide_init);
diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c
index 734dd41..ad32e18 100644
--- a/drivers/ide/pci/sis5513.c
+++ b/drivers/ide/pci/sis5513.c
@@ -605,7 +605,7 @@ static const struct pci_device_id sis5513_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, sis5513_pci_tbl);

-static struct pci_driver driver = {
+static struct pci_driver sis5513_pci_driver = {
.name = "SIS_IDE",
.id_table = sis5513_pci_tbl,
.probe = sis5513_init_one,
@@ -616,12 +616,12 @@ static struct pci_driver driver = {

static int __init sis5513_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&sis5513_pci_driver);
}

static void __exit sis5513_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&sis5513_pci_driver);
}

module_init(sis5513_ide_init);
diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c
index 37a6b7b..84dc336 100644
--- a/drivers/ide/pci/sl82c105.c
+++ b/drivers/ide/pci/sl82c105.c
@@ -207,7 +207,7 @@ static int sl82c105_dma_end(ide_drive_t *drive)

DBG(("%s(drive:%s)\n", __func__, drive->name));

- ret = __ide_dma_end(drive);
+ ret = ide_dma_end(drive);

pci_write_config_word(dev, reg, drive->drive_data);

@@ -345,7 +345,7 @@ static const struct pci_device_id sl82c105_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, sl82c105_pci_tbl);

-static struct pci_driver driver = {
+static struct pci_driver sl82c105_pci_driver = {
.name = "W82C105_IDE",
.id_table = sl82c105_pci_tbl,
.probe = sl82c105_init_one,
@@ -356,12 +356,12 @@ static struct pci_driver driver = {

static int __init sl82c105_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&sl82c105_pci_driver);
}

static void __exit sl82c105_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&sl82c105_pci_driver);
}

module_init(sl82c105_ide_init);
diff --git a/drivers/ide/pci/slc90e66.c b/drivers/ide/pci/slc90e66.c
index a9551a1..0f759e4 100644
--- a/drivers/ide/pci/slc90e66.c
+++ b/drivers/ide/pci/slc90e66.c
@@ -154,7 +154,7 @@ static const struct pci_device_id slc90e66_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, slc90e66_pci_tbl);

-static struct pci_driver driver = {
+static struct pci_driver slc90e66_pci_driver = {
.name = "SLC90e66_IDE",
.id_table = slc90e66_pci_tbl,
.probe = slc90e66_init_one,
@@ -165,12 +165,12 @@ static struct pci_driver driver = {

static int __init slc90e66_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&slc90e66_pci_driver);
}

static void __exit slc90e66_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&slc90e66_pci_driver);
}

module_init(slc90e66_ide_init);
diff --git a/drivers/ide/pci/tc86c001.c b/drivers/ide/pci/tc86c001.c
index 927277c..93e2cce 100644
--- a/drivers/ide/pci/tc86c001.c
+++ b/drivers/ide/pci/tc86c001.c
@@ -186,7 +186,7 @@ static const struct ide_dma_ops tc86c001_dma_ops = {
.dma_setup = ide_dma_setup,
.dma_exec_cmd = ide_dma_exec_cmd,
.dma_start = tc86c001_dma_start,
- .dma_end = __ide_dma_end,
+ .dma_end = ide_dma_end,
.dma_test_irq = ide_dma_test_irq,
.dma_lost_irq = ide_dma_lost_irq,
.dma_timeout = ide_dma_timeout,
@@ -245,7 +245,7 @@ static const struct pci_device_id tc86c001_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, tc86c001_pci_tbl);

-static struct pci_driver driver = {
+static struct pci_driver tc86c001_pci_driver = {
.name = "TC86C001",
.id_table = tc86c001_pci_tbl,
.probe = tc86c001_init_one,
@@ -254,12 +254,12 @@ static struct pci_driver driver = {

static int __init tc86c001_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&tc86c001_pci_driver);
}

static void __exit tc86c001_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&tc86c001_pci_driver);
}

module_init(tc86c001_ide_init);
diff --git a/drivers/ide/pci/triflex.c b/drivers/ide/pci/triflex.c
index be8715d..b6ff403 100644
--- a/drivers/ide/pci/triflex.c
+++ b/drivers/ide/pci/triflex.c
@@ -38,13 +38,12 @@ static void triflex_set_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = to_pci_dev(hwif->dev);
- u8 channel_offset = hwif->channel ? 0x74 : 0x70;
- u16 timing = 0;
u32 triflex_timings = 0;
- u8 unit = (drive->select.b.unit & 0x01);
-
+ u16 timing = 0;
+ u8 channel_offset = hwif->channel ? 0x74 : 0x70, unit = drive->dn & 1;
+
pci_read_config_dword(dev, channel_offset, &triflex_timings);
-
+
switch(speed) {
case XFER_MW_DMA_2:
timing = 0x0103;
@@ -114,7 +113,7 @@ static const struct pci_device_id triflex_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, triflex_pci_tbl);

-static struct pci_driver driver = {
+static struct pci_driver triflex_pci_driver = {
.name = "TRIFLEX_IDE",
.id_table = triflex_pci_tbl,
.probe = triflex_init_one,
@@ -125,12 +124,12 @@ static struct pci_driver driver = {

static int __init triflex_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&triflex_pci_driver);
}

static void __exit triflex_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&triflex_pci_driver);
}

module_init(triflex_ide_init);
diff --git a/drivers/ide/pci/trm290.c b/drivers/ide/pci/trm290.c
index 4dfbc6a..75ea615 100644
--- a/drivers/ide/pci/trm290.c
+++ b/drivers/ide/pci/trm290.c
@@ -161,7 +161,7 @@ static void trm290_prepare_drive (ide_drive_t *drive, unsigned int use_dma)
}

/* enable IRQ if not probing */
- if (drive->present) {
+ if (drive->dev_flags & IDE_DFLAG_PRESENT) {
reg = inw(hwif->config_data + 3);
reg &= 0x13;
reg &= ~(1 << hwif->channel);
@@ -173,7 +173,7 @@ static void trm290_prepare_drive (ide_drive_t *drive, unsigned int use_dma)

static void trm290_selectproc (ide_drive_t *drive)
{
- trm290_prepare_drive(drive, drive->using_dma);
+ trm290_prepare_drive(drive, !!(drive->dev_flags & IDE_DFLAG_USING_DMA));
}

static void trm290_dma_exec_cmd(ide_drive_t *drive, u8 command)
@@ -350,7 +350,7 @@ static const struct pci_device_id trm290_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, trm290_pci_tbl);

-static struct pci_driver driver = {
+static struct pci_driver trm290_pci_driver = {
.name = "TRM290_IDE",
.id_table = trm290_pci_tbl,
.probe = trm290_init_one,
@@ -359,12 +359,12 @@ static struct pci_driver driver = {

static int __init trm290_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&trm290_pci_driver);
}

static void __exit trm290_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&trm290_pci_driver);
}

module_init(trm290_ide_init);
diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c
index acacdaa..2a812d3 100644
--- a/drivers/ide/pci/via82cxxx.c
+++ b/drivers/ide/pci/via82cxxx.c
@@ -487,7 +487,7 @@ static const struct pci_device_id via_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, via_pci_tbl);

-static struct pci_driver driver = {
+static struct pci_driver via_pci_driver = {
.name = "VIA_IDE",
.id_table = via_pci_tbl,
.probe = via_init_one,
@@ -498,12 +498,12 @@ static struct pci_driver driver = {

static int __init via_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&via_pci_driver);
}

static void __exit via_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&via_pci_driver);
}

module_init(via_ide_init);
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index c3432da..2e19d62 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -430,10 +430,7 @@ pmac_ide_selectproc(ide_drive_t *drive)
pmac_ide_hwif_t *pmif =
(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);

- if (pmif == NULL)
- return;
-
- if (drive->select.b.unit & 0x01)
+ if (drive->dn & 1)
writel(pmif->timings[1], PMAC_IDE_REG(IDE_TIMING_CONFIG));
else
writel(pmif->timings[0], PMAC_IDE_REG(IDE_TIMING_CONFIG));
@@ -452,10 +449,7 @@ pmac_ide_kauai_selectproc(ide_drive_t *drive)
pmac_ide_hwif_t *pmif =
(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);

- if (pmif == NULL)
- return;
-
- if (drive->select.b.unit & 0x01) {
+ if (drive->dn & 1) {
writel(pmif->timings[1], PMAC_IDE_REG(IDE_KAUAI_PIO_CONFIG));
writel(pmif->timings[3], PMAC_IDE_REG(IDE_KAUAI_ULTRA_CONFIG));
} else {
@@ -475,9 +469,6 @@ pmac_ide_do_update_timings(ide_drive_t *drive)
pmac_ide_hwif_t *pmif =
(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);

- if (pmif == NULL)
- return;
-
if (pmif->kind == controller_sh_ata6 ||
pmif->kind == controller_un_ata6 ||
pmif->kind == controller_k2_ata6)
@@ -524,11 +515,8 @@ pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio)
unsigned accessTime, recTime;
unsigned int cycle_time;

- if (pmif == NULL)
- return;
-
/* which drive is it ? */
- timings = &pmif->timings[drive->select.b.unit & 0x01];
+ timings = &pmif->timings[drive->dn & 1];
t = *timings;

cycle_time = ide_pio_cycle_time(drive, pio);
@@ -805,9 +793,9 @@ static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed)
ide_hwif_t *hwif = drive->hwif;
pmac_ide_hwif_t *pmif =
(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
- int unit = (drive->select.b.unit & 0x01);
int ret = 0;
u32 *timings, *timings2, tl[2];
+ u8 unit = drive->dn & 1;

timings = &pmif->timings[unit];
timings2 = &pmif->timings[unit+2];
@@ -966,11 +954,11 @@ static void pmac_ide_init_dev(ide_drive_t *drive)
if (pmif->mediabay) {
#ifdef CONFIG_PMAC_MEDIABAY
if (check_media_bay_by_base(pmif->regbase, MB_CD) == 0) {
- drive->noprobe = 0;
+ drive->dev_flags &= ~IDE_DFLAG_NOPROBE;
return;
}
#endif
- drive->noprobe = 1;
+ drive->dev_flags |= IDE_DFLAG_NOPROBE;
}
}

@@ -1535,18 +1523,6 @@ use_pio_instead:
return 0; /* revert to PIO for this request */
}

-/* Teardown mappings after DMA has completed. */
-static void
-pmac_ide_destroy_dmatable (ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
-
- if (hwif->sg_nents) {
- ide_destroy_dmatable(drive);
- hwif->sg_nents = 0;
- }
-}
-
/*
* Prepare a DMA transfer. We build the DMA table, adjust the timings for
* a read on KeyLargo ATA/66 and mark us as waiting for DMA completion
@@ -1558,12 +1534,7 @@ pmac_ide_dma_setup(ide_drive_t *drive)
pmac_ide_hwif_t *pmif =
(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
struct request *rq = HWGROUP(drive)->rq;
- u8 unit = (drive->select.b.unit & 0x01);
- u8 ata4;
-
- if (pmif == NULL)
- return 1;
- ata4 = (pmif->kind == controller_kl_ata4);
+ u8 unit = drive->dn & 1, ata4 = (pmif->kind == controller_kl_ata4);

if (!pmac_ide_build_dmatable(drive, rq)) {
ide_map_sg(drive, rq);
@@ -1617,17 +1588,15 @@ pmac_ide_dma_end (ide_drive_t *drive)
ide_hwif_t *hwif = drive->hwif;
pmac_ide_hwif_t *pmif =
(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
- volatile struct dbdma_regs __iomem *dma;
+ volatile struct dbdma_regs __iomem *dma = pmif->dma_regs;
u32 dstat;
-
- if (pmif == NULL)
- return 0;
- dma = pmif->dma_regs;

drive->waiting_for_dma = 0;
dstat = readl(&dma->status);
writel(((RUN|WAKE|DEAD) << 16), &dma->control);
- pmac_ide_destroy_dmatable(drive);
+
+ ide_destroy_dmatable(drive);
+
/* verify good dma status. we don't check for ACTIVE beeing 0. We should...
* in theory, but with ATAPI decices doing buffer underruns, that would
* cause us to disable DMA, which isn't what we want
@@ -1647,13 +1616,9 @@ pmac_ide_dma_test_irq (ide_drive_t *drive)
ide_hwif_t *hwif = drive->hwif;
pmac_ide_hwif_t *pmif =
(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
- volatile struct dbdma_regs __iomem *dma;
+ volatile struct dbdma_regs __iomem *dma = pmif->dma_regs;
unsigned long status, timeout;

- if (pmif == NULL)
- return 0;
- dma = pmif->dma_regs;
-
/* We have to things to deal with here:
*
* - The dbdma won't stop if the command was started
@@ -1672,9 +1637,6 @@ pmac_ide_dma_test_irq (ide_drive_t *drive)
status = readl(&dma->status);
if (!(status & ACTIVE))
return 1;
- if (!drive->waiting_for_dma)
- printk(KERN_WARNING "ide%d, ide_dma_test_irq \
- called while not waiting\n", HWIF(drive)->index);

/* If dbdma didn't execute the STOP command yet, the
* active bit is still set. We consider that we aren't
@@ -1709,14 +1671,9 @@ pmac_ide_dma_lost_irq (ide_drive_t *drive)
ide_hwif_t *hwif = drive->hwif;
pmac_ide_hwif_t *pmif =
(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
- volatile struct dbdma_regs __iomem *dma;
- unsigned long status;
-
- if (pmif == NULL)
- return;
- dma = pmif->dma_regs;
+ volatile struct dbdma_regs __iomem *dma = pmif->dma_regs;
+ unsigned long status = readl(&dma->status);

- status = readl(&dma->status);
printk(KERN_ERR "ide-pmac lost interrupt, dma status: %lx\n", status);
}

diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c
index 90212ac..740bad4 100644
--- a/drivers/scsi/ide-scsi.c
+++ b/drivers/scsi/ide-scsi.c
@@ -82,7 +82,6 @@ typedef struct ide_scsi_obj {
struct gendisk *disk;
struct Scsi_Host *host;

- struct ide_atapi_pc *pc; /* Current packet command */
unsigned long transform; /* SCSI cmd translation layer */
unsigned long log; /* log flags */
} idescsi_scsi_t;
@@ -137,10 +136,10 @@ static void ide_scsi_hex_dump(u8 *data, int len)

static int idescsi_end_request(ide_drive_t *, int, int);

-static void ide_scsi_callback(ide_drive_t *drive)
+static void ide_scsi_callback(ide_drive_t *drive, int dsc)
{
idescsi_scsi_t *scsi = drive_to_idescsi(drive);
- struct ide_atapi_pc *pc = scsi->pc;
+ struct ide_atapi_pc *pc = drive->pc;

if (pc->flags & PC_FLAG_TIMEDOUT)
debug_log("%s: got timed out packet %lu at %lu\n", __func__,
@@ -267,49 +266,10 @@ static int idescsi_end_request (ide_drive_t *drive, int uptodate, int nrsecs)
spin_unlock_irqrestore(host->host_lock, flags);
kfree(pc);
blk_put_request(rq);
- scsi->pc = NULL;
+ drive->pc = NULL;
return 0;
}

-static inline unsigned long get_timeout(struct ide_atapi_pc *pc)
-{
- return max_t(unsigned long, WAIT_CMD, pc->timeout - jiffies);
-}
-
-static int idescsi_expiry(ide_drive_t *drive)
-{
- idescsi_scsi_t *scsi = drive_to_idescsi(drive);
- struct ide_atapi_pc *pc = scsi->pc;
-
- debug_log("%s called for %lu at %lu\n", __func__,
- pc->scsi_cmd->serial_number, jiffies);
-
- pc->flags |= PC_FLAG_TIMEDOUT;
-
- return 0; /* we do not want the ide subsystem to retry */
-}
-
-/*
- * Our interrupt handler.
- */
-static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive)
-{
- idescsi_scsi_t *scsi = drive_to_idescsi(drive);
- struct ide_atapi_pc *pc = scsi->pc;
-
- return ide_pc_intr(drive, pc, idescsi_pc_intr, get_timeout(pc),
- idescsi_expiry, NULL, NULL, NULL,
- ide_io_buffers);
-}
-
-static ide_startstop_t idescsi_transfer_pc(ide_drive_t *drive)
-{
- idescsi_scsi_t *scsi = drive_to_idescsi(drive);
-
- return ide_transfer_pc(drive, scsi->pc, idescsi_pc_intr,
- get_timeout(scsi->pc), idescsi_expiry);
-}
-
static inline int idescsi_set_direction(struct ide_atapi_pc *pc)
{
switch (pc->c[0]) {
@@ -352,13 +312,10 @@ static int idescsi_map_sg(ide_drive_t *drive, struct ide_atapi_pc *pc)
static ide_startstop_t idescsi_issue_pc(ide_drive_t *drive,
struct ide_atapi_pc *pc)
{
- idescsi_scsi_t *scsi = drive_to_idescsi(drive);
-
/* Set the current packet command */
- scsi->pc = pc;
+ drive->pc = pc;

- return ide_issue_pc(drive, pc, idescsi_transfer_pc,
- get_timeout(pc), idescsi_expiry);
+ return ide_issue_pc(drive, ide_scsi_get_timeout(pc), ide_scsi_expiry);
}

/*
@@ -374,7 +331,8 @@ static ide_startstop_t idescsi_do_request (ide_drive_t *drive, struct request *r
if (blk_sense_request(rq) || blk_special_request(rq)) {
struct ide_atapi_pc *pc = (struct ide_atapi_pc *)rq->special;

- if (drive->using_dma && !idescsi_map_sg(drive, pc))
+ if ((drive->dev_flags & IDE_DFLAG_USING_DMA) &&
+ idescsi_map_sg(drive, pc) == 0)
pc->flags |= PC_FLAG_DMA_OK;

return idescsi_issue_pc(drive, pc);
@@ -427,14 +385,14 @@ static const struct ide_proc_devset idescsi_settings[] = {
*/
static void idescsi_setup (ide_drive_t *drive, idescsi_scsi_t *scsi)
{
- if ((drive->id[ATA_ID_CONFIG] & 0x0060) == 0x20)
- set_bit(IDE_AFLAG_DRQ_INTERRUPT, &drive->atapi_flags);
clear_bit(IDESCSI_SG_TRANSFORM, &scsi->transform);
#if IDESCSI_DEBUG_LOG
set_bit(IDESCSI_LOG_CMD, &scsi->log);
#endif /* IDESCSI_DEBUG_LOG */

- drive->pc_callback = ide_scsi_callback;
+ drive->pc_callback = ide_scsi_callback;
+ drive->pc_update_buffers = NULL;
+ drive->pc_io_buffers = ide_io_buffers;

ide_proc_register_driver(drive, scsi->driver);
}
@@ -456,7 +414,7 @@ static void ide_scsi_remove(ide_drive_t *drive)

ide_scsi_put(scsi);

- drive->scsi = 0;
+ drive->dev_flags &= ~IDE_DFLAG_SCSI;
}

static int ide_scsi_probe(ide_drive_t *);
@@ -477,7 +435,6 @@ static ide_driver_t idescsi_driver = {
.probe = ide_scsi_probe,
.remove = ide_scsi_remove,
.version = IDESCSI_VERSION,
- .media = ide_scsi,
.do_request = idescsi_do_request,
.end_request = idescsi_end_request,
.error = idescsi_atapi_error,
@@ -622,6 +579,8 @@ static int idescsi_eh_abort (struct scsi_cmnd *cmd)
int busy;
int ret = FAILED;

+ struct ide_atapi_pc *pc;
+
/* In idescsi_eh_abort we try to gently pry our command from the ide subsystem */

if (test_bit(IDESCSI_LOG_CMD, &scsi->log))
@@ -642,26 +601,27 @@ static int idescsi_eh_abort (struct scsi_cmnd *cmd)
spin_lock_irq(&ide_lock);

/* If there is no pc running we're done (our interrupt took care of it) */
- if (!scsi->pc) {
+ pc = drive->pc;
+ if (pc == NULL) {
ret = SUCCESS;
goto ide_unlock;
}

/* It's somewhere in flight. Does ide subsystem agree? */
- if (scsi->pc->scsi_cmd->serial_number == cmd->serial_number && !busy &&
- elv_queue_empty(drive->queue) && HWGROUP(drive)->rq != scsi->pc->rq) {
+ if (pc->scsi_cmd->serial_number == cmd->serial_number && !busy &&
+ elv_queue_empty(drive->queue) && HWGROUP(drive)->rq != pc->rq) {
/*
* FIXME - not sure this condition can ever occur
*/
printk (KERN_ERR "ide-scsi: cmd aborted!\n");

- if (blk_sense_request(scsi->pc->rq))
- kfree(scsi->pc->buf);
+ if (blk_sense_request(pc->rq))
+ kfree(pc->buf);
/* we need to call blk_put_request twice. */
- blk_put_request(scsi->pc->rq);
- blk_put_request(scsi->pc->rq);
- kfree(scsi->pc);
- scsi->pc = NULL;
+ blk_put_request(pc->rq);
+ blk_put_request(pc->rq);
+ kfree(pc);
+ drive->pc = NULL;

ret = SUCCESS;
}
@@ -683,6 +643,8 @@ static int idescsi_eh_reset (struct scsi_cmnd *cmd)
int ready = 0;
int ret = SUCCESS;

+ struct ide_atapi_pc *pc;
+
/* In idescsi_eh_reset we forcefully remove the command from the ide subsystem and reset the device. */

if (test_bit(IDESCSI_LOG_CMD, &scsi->log))
@@ -697,7 +659,9 @@ static int idescsi_eh_reset (struct scsi_cmnd *cmd)
spin_lock_irq(cmd->device->host->host_lock);
spin_lock(&ide_lock);

- if (!scsi->pc || (req = scsi->pc->rq) != HWGROUP(drive)->rq || !HWGROUP(drive)->handler) {
+ pc = drive->pc;
+
+ if (pc == NULL || (req = pc->rq) != HWGROUP(drive)->rq || !HWGROUP(drive)->handler) {
printk (KERN_WARNING "ide-scsi: No active request in idescsi_eh_reset\n");
spin_unlock(&ide_lock);
spin_unlock_irq(cmd->device->host->host_lock);
@@ -708,9 +672,9 @@ static int idescsi_eh_reset (struct scsi_cmnd *cmd)
if (__blk_end_request(req, -EIO, 0))
BUG();
if (blk_sense_request(req))
- kfree(scsi->pc->buf);
- kfree(scsi->pc);
- scsi->pc = NULL;
+ kfree(pc->buf);
+ kfree(pc);
+ drive->pc = NULL;
blk_put_request(req);

/* now nuke the drive queue */
@@ -801,7 +765,7 @@ static int ide_scsi_probe(ide_drive_t *drive)
!(host = scsi_host_alloc(&idescsi_template,sizeof(idescsi_scsi_t))))
return -ENODEV;

- drive->scsi = 1;
+ drive->dev_flags |= IDE_DFLAG_SCSI;

g = alloc_disk(1 << PARTN_BITS);
if (!g)
@@ -842,7 +806,7 @@ static int ide_scsi_probe(ide_drive_t *drive)

put_disk(g);
out_host_put:
- drive->scsi = 0;
+ drive->dev_flags &= ~IDE_DFLAG_SCSI;
scsi_host_put(host);
return err;
}
diff --git a/include/linux/ide.h b/include/linux/ide.h
index a9d82d6..c47e371 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -48,12 +48,6 @@ typedef unsigned char byte; /* used everywhere */
#define ERROR_RESET 3 /* Reset controller every 4th retry */
#define ERROR_RECAL 1 /* Recalibrate every 2nd retry */

-/*
- * state flags
- */
-
-#define DMA_PIO_RETRY 1 /* retrying in PIO */
-
#define HWIF(drive) ((ide_hwif_t *)((drive)->hwif))
#define HWGROUP(drive) ((ide_hwgroup_t *)(HWIF(drive)->hwgroup))

@@ -162,6 +156,8 @@ enum {
*/
#define REQ_DRIVE_RESET 0x20
#define REQ_DEVSET_EXEC 0x21
+#define REQ_PARK_HEADS 0x22
+#define REQ_UNPARK_HEADS 0x23

/*
* Check for an interrupt and acknowledge the interrupt status
@@ -268,8 +264,6 @@ static inline int __ide_default_irq(unsigned long base)
* set_geometry : respecify drive geometry
* recalibrate : seek to cyl 0
* set_multmode : set multmode count
- * set_tune : tune interface for drive
- * serviced : service command
* reserved : unused
*/
typedef union {
@@ -278,43 +272,11 @@ typedef union {
unsigned set_geometry : 1;
unsigned recalibrate : 1;
unsigned set_multmode : 1;
- unsigned set_tune : 1;
- unsigned serviced : 1;
- unsigned reserved : 3;
+ unsigned reserved : 5;
} b;
} special_t;

/*
- * ATA-IDE Select Register, aka Device-Head
- *
- * head : always zeros here
- * unit : drive select number: 0/1
- * bit5 : always 1
- * lba : using LBA instead of CHS
- * bit7 : always 1
- */
-typedef union {
- unsigned all : 8;
- struct {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- unsigned head : 4;
- unsigned unit : 1;
- unsigned bit5 : 1;
- unsigned lba : 1;
- unsigned bit7 : 1;
-#elif defined(__BIG_ENDIAN_BITFIELD)
- unsigned bit7 : 1;
- unsigned lba : 1;
- unsigned bit5 : 1;
- unsigned unit : 1;
- unsigned head : 4;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
- } b;
-} select_t, ata_select_t;
-
-/*
* Status returned from various ide_ functions
*/
typedef enum {
@@ -322,6 +284,175 @@ typedef enum {
ide_started, /* a drive operation was started, handler was set */
} ide_startstop_t;

+enum {
+ IDE_TFLAG_LBA48 = (1 << 0),
+ IDE_TFLAG_FLAGGED = (1 << 2),
+ IDE_TFLAG_OUT_DATA = (1 << 3),
+ IDE_TFLAG_OUT_HOB_FEATURE = (1 << 4),
+ IDE_TFLAG_OUT_HOB_NSECT = (1 << 5),
+ IDE_TFLAG_OUT_HOB_LBAL = (1 << 6),
+ IDE_TFLAG_OUT_HOB_LBAM = (1 << 7),
+ IDE_TFLAG_OUT_HOB_LBAH = (1 << 8),
+ IDE_TFLAG_OUT_HOB = IDE_TFLAG_OUT_HOB_FEATURE |
+ IDE_TFLAG_OUT_HOB_NSECT |
+ IDE_TFLAG_OUT_HOB_LBAL |
+ IDE_TFLAG_OUT_HOB_LBAM |
+ IDE_TFLAG_OUT_HOB_LBAH,
+ IDE_TFLAG_OUT_FEATURE = (1 << 9),
+ IDE_TFLAG_OUT_NSECT = (1 << 10),
+ IDE_TFLAG_OUT_LBAL = (1 << 11),
+ IDE_TFLAG_OUT_LBAM = (1 << 12),
+ IDE_TFLAG_OUT_LBAH = (1 << 13),
+ IDE_TFLAG_OUT_TF = IDE_TFLAG_OUT_FEATURE |
+ IDE_TFLAG_OUT_NSECT |
+ IDE_TFLAG_OUT_LBAL |
+ IDE_TFLAG_OUT_LBAM |
+ IDE_TFLAG_OUT_LBAH,
+ IDE_TFLAG_OUT_DEVICE = (1 << 14),
+ IDE_TFLAG_WRITE = (1 << 15),
+ IDE_TFLAG_FLAGGED_SET_IN_FLAGS = (1 << 16),
+ IDE_TFLAG_IN_DATA = (1 << 17),
+ IDE_TFLAG_CUSTOM_HANDLER = (1 << 18),
+ IDE_TFLAG_DMA_PIO_FALLBACK = (1 << 19),
+ IDE_TFLAG_IN_HOB_FEATURE = (1 << 20),
+ IDE_TFLAG_IN_HOB_NSECT = (1 << 21),
+ IDE_TFLAG_IN_HOB_LBAL = (1 << 22),
+ IDE_TFLAG_IN_HOB_LBAM = (1 << 23),
+ IDE_TFLAG_IN_HOB_LBAH = (1 << 24),
+ IDE_TFLAG_IN_HOB_LBA = IDE_TFLAG_IN_HOB_LBAL |
+ IDE_TFLAG_IN_HOB_LBAM |
+ IDE_TFLAG_IN_HOB_LBAH,
+ IDE_TFLAG_IN_HOB = IDE_TFLAG_IN_HOB_FEATURE |
+ IDE_TFLAG_IN_HOB_NSECT |
+ IDE_TFLAG_IN_HOB_LBA,
+ IDE_TFLAG_IN_FEATURE = (1 << 1),
+ IDE_TFLAG_IN_NSECT = (1 << 25),
+ IDE_TFLAG_IN_LBAL = (1 << 26),
+ IDE_TFLAG_IN_LBAM = (1 << 27),
+ IDE_TFLAG_IN_LBAH = (1 << 28),
+ IDE_TFLAG_IN_LBA = IDE_TFLAG_IN_LBAL |
+ IDE_TFLAG_IN_LBAM |
+ IDE_TFLAG_IN_LBAH,
+ IDE_TFLAG_IN_TF = IDE_TFLAG_IN_NSECT |
+ IDE_TFLAG_IN_LBA,
+ IDE_TFLAG_IN_DEVICE = (1 << 29),
+ IDE_TFLAG_HOB = IDE_TFLAG_OUT_HOB |
+ IDE_TFLAG_IN_HOB,
+ IDE_TFLAG_TF = IDE_TFLAG_OUT_TF |
+ IDE_TFLAG_IN_TF,
+ IDE_TFLAG_DEVICE = IDE_TFLAG_OUT_DEVICE |
+ IDE_TFLAG_IN_DEVICE,
+ /* force 16-bit I/O operations */
+ IDE_TFLAG_IO_16BIT = (1 << 30),
+ /* ide_task_t was allocated using kmalloc() */
+ IDE_TFLAG_DYN = (1 << 31),
+};
+
+struct ide_taskfile {
+ u8 hob_data; /* 0: high data byte (for TASKFILE IOCTL) */
+
+ u8 hob_feature; /* 1-5: additional data to support LBA48 */
+ u8 hob_nsect;
+ u8 hob_lbal;
+ u8 hob_lbam;
+ u8 hob_lbah;
+
+ u8 data; /* 6: low data byte (for TASKFILE IOCTL) */
+
+ union { /*  7: */
+ u8 error; /* read: error */
+ u8 feature; /* write: feature */
+ };
+
+ u8 nsect; /* 8: number of sectors */
+ u8 lbal; /* 9: LBA low */
+ u8 lbam; /* 10: LBA mid */
+ u8 lbah; /* 11: LBA high */
+
+ u8 device; /* 12: device select */
+
+ union { /* 13: */
+ u8 status; /*  read: status  */
+ u8 command; /* write: command */
+ };
+};
+
+typedef struct ide_task_s {
+ union {
+ struct ide_taskfile tf;
+ u8 tf_array[14];
+ };
+ u32 tf_flags;
+ int data_phase;
+ struct request *rq; /* copy of request */
+ void *special; /* valid_t generally */
+} ide_task_t;
+
+/* ATAPI packet command flags */
+enum {
+ /* set when an error is considered normal - no retry (ide-tape) */
+ PC_FLAG_ABORT = (1 << 0),
+ PC_FLAG_SUPPRESS_ERROR = (1 << 1),
+ PC_FLAG_WAIT_FOR_DSC = (1 << 2),
+ PC_FLAG_DMA_OK = (1 << 3),
+ PC_FLAG_DMA_IN_PROGRESS = (1 << 4),
+ PC_FLAG_DMA_ERROR = (1 << 5),
+ PC_FLAG_WRITING = (1 << 6),
+ /* command timed out */
+ PC_FLAG_TIMEDOUT = (1 << 7),
+};
+
+/*
+ * With each packet command, we allocate a buffer of IDE_PC_BUFFER_SIZE bytes.
+ * This is used for several packet commands (not for READ/WRITE commands).
+ */
+#define IDE_PC_BUFFER_SIZE 256
+
+struct ide_atapi_pc {
+ /* actual packet bytes */
+ u8 c[12];
+ /* incremented on each retry */
+ int retries;
+ int error;
+
+ /* bytes to transfer */
+ int req_xfer;
+ /* bytes actually transferred */
+ int xferred;
+
+ /* data buffer */
+ u8 *buf;
+ /* current buffer position */
+ u8 *cur_pos;
+ int buf_size;
+ /* missing/available data on the current buffer */
+ int b_count;
+
+ /* the corresponding request */
+ struct request *rq;
+
+ unsigned long flags;
+
+ /*
+ * those are more or less driver-specific and some of them are subject
+ * to change/removal later.
+ */
+ u8 pc_buf[IDE_PC_BUFFER_SIZE];
+
+ /* idetape only */
+ struct idetape_bh *bh;
+ char *b_data;
+
+ /* idescsi only for now */
+ struct scatterlist *sg;
+ unsigned int sg_cnt;
+
+ struct scsi_cmnd *scsi_cmd;
+ void (*done) (struct scsi_cmnd *);
+
+ unsigned long timeout;
+};
+
struct ide_devset;
struct ide_driver_s;

@@ -394,6 +525,62 @@ enum {
IDE_AFLAG_NO_AUTOCLOSE = (1 << 29),
};

+/* device flags */
+enum {
+ /* restore settings after device reset */
+ IDE_DFLAG_KEEP_SETTINGS = (1 << 0),
+ /* device is using DMA for read/write */
+ IDE_DFLAG_USING_DMA = (1 << 1),
+ /* okay to unmask other IRQs */
+ IDE_DFLAG_UNMASK = (1 << 2),
+ /* don't attempt flushes */
+ IDE_DFLAG_NOFLUSH = (1 << 3),
+ /* DSC overlap */
+ IDE_DFLAG_DSC_OVERLAP = (1 << 4),
+ /* give potential excess bandwidth */
+ IDE_DFLAG_NICE1 = (1 << 5),
+ /* device is physically present */
+ IDE_DFLAG_PRESENT = (1 << 6),
+ /* device ejected hint */
+ IDE_DFLAG_DEAD = (1 << 7),
+ /* id read from device (synthetic if not set) */
+ IDE_DFLAG_ID_READ = (1 << 8),
+ IDE_DFLAG_NOPROBE = (1 << 9),
+ /* need to do check_media_change() */
+ IDE_DFLAG_REMOVABLE = (1 << 10),
+ /* needed for removable devices */
+ IDE_DFLAG_ATTACH = (1 << 11),
+ IDE_DFLAG_FORCED_GEOM = (1 << 12),
+ /* disallow setting unmask bit */
+ IDE_DFLAG_NO_UNMASK = (1 << 13),
+ /* disallow enabling 32-bit I/O */
+ IDE_DFLAG_NO_IO_32BIT = (1 << 14),
+ /* for removable only: door lock/unlock works */
+ IDE_DFLAG_DOORLOCKING = (1 << 15),
+ /* disallow DMA */
+ IDE_DFLAG_NODMA = (1 << 16),
+ /* powermanagment told us not to do anything, so sleep nicely */
+ IDE_DFLAG_BLOCKED = (1 << 17),
+ /* ide-scsi emulation */
+ IDE_DFLAG_SCSI = (1 << 18),
+ /* sleeping & sleep field valid */
+ IDE_DFLAG_SLEEPING = (1 << 19),
+ IDE_DFLAG_POST_RESET = (1 << 20),
+ IDE_DFLAG_UDMA33_WARNED = (1 << 21),
+ IDE_DFLAG_LBA48 = (1 << 22),
+ /* status of write cache */
+ IDE_DFLAG_WCACHE = (1 << 23),
+ /* used for ignoring ATA_DF */
+ IDE_DFLAG_NOWERR = (1 << 24),
+ /* retrying in PIO */
+ IDE_DFLAG_DMA_PIO_RETRY = (1 << 25),
+ IDE_DFLAG_LBA = (1 << 26),
+ /* don't unload heads */
+ IDE_DFLAG_NO_UNLOAD = (1 << 27),
+ /* heads unloaded, please don't reset port */
+ IDE_DFLAG_PARKED = (1 << 28)
+};
+
struct ide_drive_s {
char name[4]; /* drive name, such as "hda" */
char driver_req[10]; /* requests specific driver */
@@ -410,43 +597,19 @@ struct ide_drive_s {
#endif
struct hwif_s *hwif; /* actually (ide_hwif_t *) */

+ unsigned long dev_flags;
+
unsigned long sleep; /* sleep until this time */
unsigned long service_start; /* time we started last request */
unsigned long service_time; /* service time of last request */
unsigned long timeout; /* max time to wait for irq */

special_t special; /* special action flags */
- select_t select; /* basic drive/head select reg value */

+ u8 select; /* basic drive/head select reg value */
u8 retry_pio; /* retrying dma capable host in pio */
- u8 state; /* retry state */
u8 waiting_for_dma; /* dma currently in progress */
-
- unsigned keep_settings : 1; /* restore settings after drive reset */
- unsigned using_dma : 1; /* disk is using dma for read/write */
- unsigned unmask : 1; /* okay to unmask other irqs */
- unsigned noflush : 1; /* don't attempt flushes */
- unsigned dsc_overlap : 1; /* DSC overlap */
- unsigned nice1 : 1; /* give potential excess bandwidth */
- unsigned present : 1; /* drive is physically present */
- unsigned dead : 1; /* device ejected hint */
- unsigned id_read : 1; /* 1=id read from disk 0 = synthetic */
- unsigned noprobe : 1; /* from: hdx=noprobe */
- unsigned removable : 1; /* 1 if need to do check_media_change */
- unsigned attach : 1; /* needed for removable devices */
- unsigned forced_geom : 1; /* 1 if hdx=c,h,s was given at boot */
- unsigned no_unmask : 1; /* disallow setting unmask bit */
- unsigned no_io_32bit : 1; /* disallow enabling 32bit I/O */
- unsigned doorlocking : 1; /* for removable only: door lock/unlock works */
- unsigned nodma : 1; /* disallow DMA */
- unsigned blocked : 1; /* 1=powermanagment told us not to do anything, so sleep nicely */
- unsigned scsi : 1; /* 0=default, 1=ide-scsi emulation */
- unsigned sleeping : 1; /* 1=sleeping & sleep field valid */
- unsigned post_reset : 1;
- unsigned udma33_warned : 1;
- unsigned addressing : 2; /* 0=28-bit, 1=48-bit, 2=48-bit doing 28-bit */
- unsigned wcache : 1; /* status of write cache */
- unsigned nowerr : 1; /* used for ignoring ATA_DF */
+ u8 dma; /* atapi dma flag */

u8 quirk_list; /* considered quirky, set for a specific host */
u8 init_speed; /* transfer rate set at boot */
@@ -458,7 +621,6 @@ struct ide_drive_s {
u8 ready_stat; /* min status value for drive ready */
u8 mult_count; /* current multiple sector setting */
u8 mult_req; /* requested multiple sector setting */
- u8 tune_req; /* requested drive tuning setting */
u8 io_32bit; /* 0=16-bit, 1=32-bit, 2/3=32bit+sync */
u8 bad_wstat; /* used for ignoring ATA_DF */
u8 head; /* "real" number of heads */
@@ -466,6 +628,9 @@ struct ide_drive_s {
u8 bios_head; /* BIOS/fdisk/LILO number of heads */
u8 bios_sect; /* BIOS/fdisk/LILO sectors per track */

+ /* delay this long before sending packet command */
+ u8 pc_delay;
+
unsigned int bios_cyl; /* BIOS/fdisk/LILO number of cyls */
unsigned int cyl; /* "real" number of cyls */
unsigned int drive_data; /* used by set_pio_mode/selectproc */
@@ -477,6 +642,9 @@ struct ide_drive_s {

int lun; /* logical unit */
int crc_count; /* crc counter to reduce drive speed */
+
+ unsigned long debug_mask; /* debugging levels switch */
+
#ifdef CONFIG_BLK_DEV_IDEACPI
struct ide_acpi_drive_link *acpidata;
#endif
@@ -484,17 +652,32 @@ struct ide_drive_s {
struct device gendev;
struct completion gendev_rel_comp; /* to deal with device release() */

+ /* current packet command */
+ struct ide_atapi_pc *pc;
+
/* callback for packet commands */
- void (*pc_callback)(struct ide_drive_s *);
+ void (*pc_callback)(struct ide_drive_s *, int);
+
+ void (*pc_update_buffers)(struct ide_drive_s *, struct ide_atapi_pc *);
+ int (*pc_io_buffers)(struct ide_drive_s *, struct ide_atapi_pc *,
+ unsigned int, int);

unsigned long atapi_flags;
+
+ struct ide_atapi_pc request_sense_pc;
+ struct request request_sense_rq;
};

typedef struct ide_drive_s ide_drive_t;

-#define to_ide_device(dev)container_of(dev, ide_drive_t, gendev)
+#define to_ide_device(dev) container_of(dev, ide_drive_t, gendev)
+
+#define to_ide_drv(obj, cont_type) \
+ container_of(obj, struct cont_type, kref)
+
+#define ide_drv_g(disk, cont_type) \
+ container_of((disk)->private_data, struct cont_type, driver)

-struct ide_task_s;
struct ide_port_info;

struct ide_tp_ops {
@@ -528,6 +711,7 @@ extern const struct ide_tp_ops default_tp_ops;
* @resetproc: routine to reset controller after a disk reset
* @maskproc: special host masking for drive selection
* @quirkproc: check host's drive quirk list
+ * @clear_irq: clear IRQ
*
* @mdma_filter: filter MDMA modes
* @udma_filter: filter UDMA modes
@@ -544,6 +728,7 @@ struct ide_port_ops {
void (*resetproc)(ide_drive_t *);
void (*maskproc)(ide_drive_t *, int);
void (*quirkproc)(ide_drive_t *);
+ void (*clear_irq)(ide_drive_t *);

u8 (*mdma_filter)(ide_drive_t *);
u8 (*udma_filter)(ide_drive_t *);
@@ -606,12 +791,16 @@ typedef struct hwif_s {
const struct ide_port_ops *port_ops;
const struct ide_dma_ops *dma_ops;

- void (*ide_dma_clear_irq)(ide_drive_t *drive);
-
/* dma physical region descriptor table (cpu view) */
unsigned int *dmatable_cpu;
/* dma physical region descriptor table (dma view) */
dma_addr_t dmatable_dma;
+
+ /* maximum number of PRD table entries */
+ int prd_max_nents;
+ /* PRD entry size in bytes */
+ int prd_ent_size;
+
/* Scatter-gather list used to build the above */
struct scatterlist *sg_table;
int sg_max_nents; /* Maximum number of entries in it */
@@ -621,6 +810,8 @@ typedef struct hwif_s {
/* data phase of the active command (currently only valid for PIO/DMA) */
int data_phase;

+ struct ide_task_s task; /* current command */
+
unsigned int nsect;
unsigned int nleft;
struct scatterlist *cursg;
@@ -649,15 +840,15 @@ typedef struct hwif_s {

void *hwif_data; /* extra hwif data */

- unsigned dma;
-
#ifdef CONFIG_BLK_DEV_IDEACPI
struct ide_acpi_hwif_link *acpidata;
#endif
} ____cacheline_internodealigned_in_smp ide_hwif_t;

+#define MAX_HOST_PORTS 4
+
struct ide_host {
- ide_hwif_t *ports[MAX_HWIFS];
+ ide_hwif_t *ports[MAX_HOST_PORTS];
unsigned int n_ports;
struct device *dev[2];
unsigned int (*init_chipset)(struct pci_dev *);
@@ -739,6 +930,22 @@ static int set_##name(ide_drive_t *drive, int arg) \
return 0; \
}

+#define ide_devset_get_flag(name, flag) \
+static int get_##name(ide_drive_t *drive) \
+{ \
+ return !!(drive->dev_flags & flag); \
+}
+
+#define ide_devset_set_flag(name, flag) \
+static int set_##name(ide_drive_t *drive, int arg) \
+{ \
+ if (arg) \
+ drive->dev_flags |= flag; \
+ else \
+ drive->dev_flags &= ~flag; \
+ return 0; \
+}
+
#define __IDE_DEVSET(_name, _flags, _get, _set) \
const struct ide_devset ide_devset_##_name = \
__DEVSET(_flags, _get, _set)
@@ -752,8 +959,11 @@ IDE_DEVSET(_name, 0, get_##_func, set_##_func)
#define ide_devset_w(_name, _func) \
IDE_DEVSET(_name, 0, NULL, set_##_func)

-#define ide_devset_rw_sync(_name, _func) \
-IDE_DEVSET(_name, DS_SYNC, get_##_func, set_##_func)
+#define ide_ext_devset_rw(_name, _func) \
+__IDE_DEVSET(_name, 0, get_##_func, set_##_func)
+
+#define ide_ext_devset_rw_sync(_name, _func) \
+__IDE_DEVSET(_name, DS_SYNC, get_##_func, set_##_func)

#define ide_decl_devset(_name) \
extern const struct ide_devset ide_devset_##_name
@@ -764,71 +974,6 @@ ide_decl_devset(pio_mode);
ide_decl_devset(unmaskirq);
ide_decl_devset(using_dma);

-/* ATAPI packet command flags */
-enum {
- /* set when an error is considered normal - no retry (ide-tape) */
- PC_FLAG_ABORT = (1 << 0),
- PC_FLAG_SUPPRESS_ERROR = (1 << 1),
- PC_FLAG_WAIT_FOR_DSC = (1 << 2),
- PC_FLAG_DMA_OK = (1 << 3),
- PC_FLAG_DMA_IN_PROGRESS = (1 << 4),
- PC_FLAG_DMA_ERROR = (1 << 5),
- PC_FLAG_WRITING = (1 << 6),
- /* command timed out */
- PC_FLAG_TIMEDOUT = (1 << 7),
-};
-
-/*
- * With each packet command, we allocate a buffer of IDE_PC_BUFFER_SIZE bytes.
- * This is used for several packet commands (not for READ/WRITE commands).
- */
-#define IDE_PC_BUFFER_SIZE 256
-
-struct ide_atapi_pc {
- /* actual packet bytes */
- u8 c[12];
- /* incremented on each retry */
- int retries;
- int error;
-
- /* bytes to transfer */
- int req_xfer;
- /* bytes actually transferred */
- int xferred;
-
- /* data buffer */
- u8 *buf;
- /* current buffer position */
- u8 *cur_pos;
- int buf_size;
- /* missing/available data on the current buffer */
- int b_count;
-
- /* the corresponding request */
- struct request *rq;
-
- unsigned long flags;
-
- /*
- * those are more or less driver-specific and some of them are subject
- * to change/removal later.
- */
- u8 pc_buf[IDE_PC_BUFFER_SIZE];
-
- /* idetape only */
- struct idetape_bh *bh;
- char *b_data;
-
- /* idescsi only for now */
- struct scatterlist *sg;
- unsigned int sg_cnt;
-
- struct scsi_cmnd *scsi_cmd;
- void (*done) (struct scsi_cmnd *);
-
- unsigned long timeout;
-};
-
#ifdef CONFIG_IDE_PROC_FS
/*
* /proc/ide interface
@@ -839,6 +984,11 @@ ide_devset_get(_name, _field); \
ide_devset_set(_name, _field); \
IDE_DEVSET(_name, DS_SYNC, get_##_name, set_##_name)

+#define ide_devset_rw_flag(_name, _field) \
+ide_devset_get_flag(_name, _field); \
+ide_devset_set_flag(_name, _field); \
+IDE_DEVSET(_name, DS_SYNC, get_##_name, set_##_name)
+
struct ide_proc_devset {
const char *name;
const struct ide_devset *setting;
@@ -905,37 +1055,55 @@ static inline void ide_proc_unregister_driver(ide_drive_t *drive, ide_driver_t *
#define PROC_IDE_READ_RETURN(page,start,off,count,eof,len) return 0;
#endif

+enum {
+ /* enter/exit functions */
+ IDE_DBG_FUNC = (1 << 0),
+ /* sense key/asc handling */
+ IDE_DBG_SENSE = (1 << 1),
+ /* packet commands handling */
+ IDE_DBG_PC = (1 << 2),
+ /* request handling */
+ IDE_DBG_RQ = (1 << 3),
+ /* driver probing/setup */
+ IDE_DBG_PROBE = (1 << 4),
+};
+
+/* DRV_NAME has to be defined in the driver before using the macro below */
+#define __ide_debug_log(lvl, fmt, args...) \
+{ \
+ if (unlikely(drive->debug_mask & lvl)) \
+ printk(KERN_INFO DRV_NAME ": " fmt, ## args); \
+}
+
/*
- * Power Management step value (rq->pm->pm_step).
- *
- * The step value starts at 0 (ide_pm_state_start_suspend) for a
- * suspend operation or 1000 (ide_pm_state_start_resume) for a
- * resume operation.
+ * Power Management state machine (rq->pm->pm_step).
*
- * For each step, the core calls the subdriver start_power_step() first.
+ * For each step, the core calls ide_start_power_step() first.
* This can return:
* - ide_stopped : In this case, the core calls us back again unless
* step have been set to ide_power_state_completed.
* - ide_started : In this case, the channel is left busy until an
* async event (interrupt) occurs.
- * Typically, start_power_step() will issue a taskfile request with
+ * Typically, ide_start_power_step() will issue a taskfile request with
* do_rw_taskfile().
*
- * Upon reception of the interrupt, the core will call complete_power_step()
+ * Upon reception of the interrupt, the core will call ide_complete_power_step()
* with the error code if any. This routine should update the step value
* and return. It should not start a new request. The core will call
- * start_power_step for the new step value, unless step have been set to
- * ide_power_state_completed.
- *
- * Subdrivers are expected to define their own additional power
- * steps from 1..999 for suspend and from 1001..1999 for resume,
- * other values are reserved for future use.
+ * ide_start_power_step() for the new step value, unless step have been
+ * set to IDE_PM_COMPLETED.
*/
-
enum {
- ide_pm_state_completed = -1,
- ide_pm_state_start_suspend = 0,
- ide_pm_state_start_resume = 1000,
+ IDE_PM_START_SUSPEND,
+ IDE_PM_FLUSH_CACHE = IDE_PM_START_SUSPEND,
+ IDE_PM_STANDBY,
+
+ IDE_PM_START_RESUME,
+ IDE_PM_RESTORE_PIO = IDE_PM_START_RESUME,
+ IDE_PM_IDLE,
+ IDE_PM_RESTORE_DMA,
+
+ IDE_PM_COMPLETED,
};

/*
@@ -946,7 +1114,6 @@ enum {
*/
struct ide_driver_s {
const char *version;
- u8 media;
ide_startstop_t (*do_request)(ide_drive_t *, struct request *, sector_t);
int (*end_request)(ide_drive_t *, int, int);
ide_startstop_t (*error)(ide_drive_t *, struct request *rq, u8, u8);
@@ -1015,110 +1182,6 @@ extern void ide_do_drive_cmd(ide_drive_t *, struct request *);

extern void ide_end_drive_cmd(ide_drive_t *, u8, u8);

-enum {
- IDE_TFLAG_LBA48 = (1 << 0),
- IDE_TFLAG_FLAGGED = (1 << 2),
- IDE_TFLAG_OUT_DATA = (1 << 3),
- IDE_TFLAG_OUT_HOB_FEATURE = (1 << 4),
- IDE_TFLAG_OUT_HOB_NSECT = (1 << 5),
- IDE_TFLAG_OUT_HOB_LBAL = (1 << 6),
- IDE_TFLAG_OUT_HOB_LBAM = (1 << 7),
- IDE_TFLAG_OUT_HOB_LBAH = (1 << 8),
- IDE_TFLAG_OUT_HOB = IDE_TFLAG_OUT_HOB_FEATURE |
- IDE_TFLAG_OUT_HOB_NSECT |
- IDE_TFLAG_OUT_HOB_LBAL |
- IDE_TFLAG_OUT_HOB_LBAM |
- IDE_TFLAG_OUT_HOB_LBAH,
- IDE_TFLAG_OUT_FEATURE = (1 << 9),
- IDE_TFLAG_OUT_NSECT = (1 << 10),
- IDE_TFLAG_OUT_LBAL = (1 << 11),
- IDE_TFLAG_OUT_LBAM = (1 << 12),
- IDE_TFLAG_OUT_LBAH = (1 << 13),
- IDE_TFLAG_OUT_TF = IDE_TFLAG_OUT_FEATURE |
- IDE_TFLAG_OUT_NSECT |
- IDE_TFLAG_OUT_LBAL |
- IDE_TFLAG_OUT_LBAM |
- IDE_TFLAG_OUT_LBAH,
- IDE_TFLAG_OUT_DEVICE = (1 << 14),
- IDE_TFLAG_WRITE = (1 << 15),
- IDE_TFLAG_FLAGGED_SET_IN_FLAGS = (1 << 16),
- IDE_TFLAG_IN_DATA = (1 << 17),
- IDE_TFLAG_CUSTOM_HANDLER = (1 << 18),
- IDE_TFLAG_DMA_PIO_FALLBACK = (1 << 19),
- IDE_TFLAG_IN_HOB_FEATURE = (1 << 20),
- IDE_TFLAG_IN_HOB_NSECT = (1 << 21),
- IDE_TFLAG_IN_HOB_LBAL = (1 << 22),
- IDE_TFLAG_IN_HOB_LBAM = (1 << 23),
- IDE_TFLAG_IN_HOB_LBAH = (1 << 24),
- IDE_TFLAG_IN_HOB_LBA = IDE_TFLAG_IN_HOB_LBAL |
- IDE_TFLAG_IN_HOB_LBAM |
- IDE_TFLAG_IN_HOB_LBAH,
- IDE_TFLAG_IN_HOB = IDE_TFLAG_IN_HOB_FEATURE |
- IDE_TFLAG_IN_HOB_NSECT |
- IDE_TFLAG_IN_HOB_LBA,
- IDE_TFLAG_IN_FEATURE = (1 << 1),
- IDE_TFLAG_IN_NSECT = (1 << 25),
- IDE_TFLAG_IN_LBAL = (1 << 26),
- IDE_TFLAG_IN_LBAM = (1 << 27),
- IDE_TFLAG_IN_LBAH = (1 << 28),
- IDE_TFLAG_IN_LBA = IDE_TFLAG_IN_LBAL |
- IDE_TFLAG_IN_LBAM |
- IDE_TFLAG_IN_LBAH,
- IDE_TFLAG_IN_TF = IDE_TFLAG_IN_NSECT |
- IDE_TFLAG_IN_LBA,
- IDE_TFLAG_IN_DEVICE = (1 << 29),
- IDE_TFLAG_HOB = IDE_TFLAG_OUT_HOB |
- IDE_TFLAG_IN_HOB,
- IDE_TFLAG_TF = IDE_TFLAG_OUT_TF |
- IDE_TFLAG_IN_TF,
- IDE_TFLAG_DEVICE = IDE_TFLAG_OUT_DEVICE |
- IDE_TFLAG_IN_DEVICE,
- /* force 16-bit I/O operations */
- IDE_TFLAG_IO_16BIT = (1 << 30),
- /* ide_task_t was allocated using kmalloc() */
- IDE_TFLAG_DYN = (1 << 31),
-};
-
-struct ide_taskfile {
- u8 hob_data; /* 0: high data byte (for TASKFILE IOCTL) */
-
- u8 hob_feature; /* 1-5: additional data to support LBA48 */
- u8 hob_nsect;
- u8 hob_lbal;
- u8 hob_lbam;
- u8 hob_lbah;
-
- u8 data; /* 6: low data byte (for TASKFILE IOCTL) */
-
- union { /*  7: */
- u8 error; /* read: error */
- u8 feature; /* write: feature */
- };
-
- u8 nsect; /* 8: number of sectors */
- u8 lbal; /* 9: LBA low */
- u8 lbam; /* 10: LBA mid */
- u8 lbah; /* 11: LBA high */
-
- u8 device; /* 12: device select */
-
- union { /* 13: */
- u8 status; /*  read: status  */
- u8 command; /* write: command */
- };
-};
-
-typedef struct ide_task_s {
- union {
- struct ide_taskfile tf;
- u8 tf_array[14];
- };
- u32 tf_flags;
- int data_phase;
- struct request *rq; /* copy of request */
- void *special; /* valid_t generally */
-} ide_task_t;
-
void ide_tf_dump(const char *, struct ide_taskfile *);

void ide_exec_command(ide_hwif_t *, u8);
@@ -1150,6 +1213,13 @@ int ide_check_atapi_device(ide_drive_t *, const char *);

void ide_init_pc(struct ide_atapi_pc *);

+/* Disk head parking */
+extern wait_queue_head_t ide_park_wq;
+ssize_t ide_park_show(struct device *dev, struct device_attribute *attr,
+ char *buf);
+ssize_t ide_park_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t len);
+
/*
* Special requests for ide-tape block device strategy routine.
*
@@ -1163,24 +1233,22 @@ enum {
REQ_IDETAPE_WRITE = (1 << 3),
};

-void ide_queue_pc_head(ide_drive_t *, struct gendisk *, struct ide_atapi_pc *,
- struct request *);
int ide_queue_pc_tail(ide_drive_t *, struct gendisk *, struct ide_atapi_pc *);

int ide_do_test_unit_ready(ide_drive_t *, struct gendisk *);
int ide_do_start_stop(ide_drive_t *, struct gendisk *, int);
int ide_set_media_lock(ide_drive_t *, struct gendisk *, int);
+void ide_create_request_sense_cmd(ide_drive_t *, struct ide_atapi_pc *);
+void ide_retry_pc(ide_drive_t *, struct gendisk *);
+
+static inline unsigned long ide_scsi_get_timeout(struct ide_atapi_pc *pc)
+{
+ return max_t(unsigned long, WAIT_CMD, pc->timeout - jiffies);
+}
+
+int ide_scsi_expiry(ide_drive_t *);

-ide_startstop_t ide_pc_intr(ide_drive_t *drive, struct ide_atapi_pc *pc,
- ide_handler_t *handler, unsigned int timeout, ide_expiry_t *expiry,
- void (*update_buffers)(ide_drive_t *, struct ide_atapi_pc *),
- void (*retry_pc)(ide_drive_t *), void (*dsc_handle)(ide_drive_t *),
- int (*io_buffers)(ide_drive_t *, struct ide_atapi_pc *, unsigned int,
- int));
-ide_startstop_t ide_transfer_pc(ide_drive_t *, struct ide_atapi_pc *,
- ide_handler_t *, unsigned int, ide_expiry_t *);
-ide_startstop_t ide_issue_pc(ide_drive_t *, struct ide_atapi_pc *,
- ide_handler_t *, unsigned int, ide_expiry_t *);
+ide_startstop_t ide_issue_pc(ide_drive_t *, unsigned int, ide_expiry_t *);

ide_startstop_t do_rw_taskfile(ide_drive_t *, ide_task_t *);

@@ -1358,6 +1426,7 @@ struct drive_list_entry {
int ide_in_drive_list(u16 *, const struct drive_list_entry *);

#ifdef CONFIG_BLK_DEV_IDEDMA
+int ide_dma_good_drive(ide_drive_t *);
int __ide_dma_bad_drive(ide_drive_t *);
int ide_id_dma_bug(ide_drive_t *);

@@ -1375,25 +1444,29 @@ int ide_set_dma(ide_drive_t *);
void ide_check_dma_crc(ide_drive_t *);
ide_startstop_t ide_dma_intr(ide_drive_t *);

+int ide_allocate_dma_engine(ide_hwif_t *);
+void ide_release_dma_engine(ide_hwif_t *);
+
int ide_build_sglist(ide_drive_t *, struct request *);
void ide_destroy_dmatable(ide_drive_t *);

#ifdef CONFIG_BLK_DEV_IDEDMA_SFF
+int config_drive_for_dma(ide_drive_t *);
extern int ide_build_dmatable(ide_drive_t *, struct request *);
-int ide_allocate_dma_engine(ide_hwif_t *);
-void ide_release_dma_engine(ide_hwif_t *);
-
void ide_dma_host_set(ide_drive_t *, int);
extern int ide_dma_setup(ide_drive_t *);
void ide_dma_exec_cmd(ide_drive_t *, u8);
extern void ide_dma_start(ide_drive_t *);
-extern int __ide_dma_end(ide_drive_t *);
+int ide_dma_end(ide_drive_t *);
int ide_dma_test_irq(ide_drive_t *);
-extern void ide_dma_lost_irq(ide_drive_t *);
-extern void ide_dma_timeout(ide_drive_t *);
extern const struct ide_dma_ops sff_dma_ops;
+#else
+static inline int config_drive_for_dma(ide_drive_t *drive) { return 0; }
#endif /* CONFIG_BLK_DEV_IDEDMA_SFF */

+void ide_dma_lost_irq(ide_drive_t *);
+void ide_dma_timeout(ide_drive_t *);
+
#else
static inline int ide_id_dma_bug(ide_drive_t *drive) { return 0; }
static inline u8 ide_find_dma_mode(ide_drive_t *drive, u8 speed) { return 0; }
@@ -1404,11 +1477,8 @@ static inline void ide_dma_on(ide_drive_t *drive) { ; }
static inline void ide_dma_verbose(ide_drive_t *drive) { ; }
static inline int ide_set_dma(ide_drive_t *drive) { return 1; }
static inline void ide_check_dma_crc(ide_drive_t *drive) { ; }
-#endif /* CONFIG_BLK_DEV_IDEDMA */
-
-#ifndef CONFIG_BLK_DEV_IDEDMA_SFF
static inline void ide_release_dma_engine(ide_hwif_t *hwif) { ; }
-#endif
+#endif /* CONFIG_BLK_DEV_IDEDMA */

#ifdef CONFIG_BLK_DEV_IDEACPI
extern int ide_acpi_exec_tfs(ide_drive_t *drive);
@@ -1436,7 +1506,6 @@ void ide_undecoded_slave(ide_drive_t *);

void ide_port_apply_params(ide_hwif_t *);

-struct ide_host *ide_host_alloc_all(const struct ide_port_info *, hw_regs_t **);
struct ide_host *ide_host_alloc(const struct ide_port_info *, hw_regs_t **);
void ide_host_free(struct ide_host *);
int ide_host_register(struct ide_host *, const struct ide_port_info *,
@@ -1547,6 +1616,6 @@ static inline ide_drive_t *ide_get_pair_dev(ide_drive_t *drive)
{
ide_drive_t *peer = &drive->hwif->drives[(drive->dn ^ 1) & 1];

- return peer->present ? peer : NULL;
+ return (peer->dev_flags & IDE_DFLAG_PRESENT) ? peer : NULL;
}
#endif /* _IDE_H */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2008-10-13 22:17    [W:0.534 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site