Messages in this thread | | | From | Bill Gribble <> | Subject | Re: 2.6.24-rc2 libertas_sdio fails to initialize Marvell SD8686 | Date | Wed, 09 Jan 2008 14:53:58 -0500 |
| |
Pierre Ossman <drzeus-mmc@drzeus.cx> writes: > Marvell tend to not have a one true firmware, but one for each device, > so you might end up having to dig out the ones shipped with the > device.
I finally got these firmware files from the manufacturer; still, with 2.6.24-rc6 and the new firmware files, the same errors occur.
>> Nov 13 14:40:09 pequin kernel: mmc0: starting CMD53 arg 9a000002 flags 000001b5 >> Nov 13 14:40:09 pequin kernel: mmc0: blksz 32 blocks 2 flags 00000100 tsac 1000 ms nsac 0 >> Nov 13 14:40:09 pequin kernel: sdhci [sdhci_irq()]: *** sdhci:slot0 got interrupt: 0x00000001 >> Nov 13 14:40:11 pequin kernel: sdhci [sdhci_irq()]: *** sdhci:slot0 got interrupt: 0x00108000 >> Nov 13 14:40:11 pequin kernel: mmc0: req done (CMD53): 0: 00002000 00000000 00000000 00000000 >> Nov 13 14:40:11 pequin kernel: mmc0: 32 bytes transferred: -110 > > Your problem is here. The card chokes for some reason and times out > when it's supposed to receive a chunk of the firmware. Odd, as the > loading loop first queries the card if it is ready for more data.
Any other sage advice? I feel like the device is really close to working, but I just can't get it there!
Thanks, Bill Gribble
!DSPAM:4785262012631060021202!
| |