lkml.org 
[lkml]   [2008]   [Jan]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC][PATCH] PM: Acquire device locks on suspend (rev. 2)
Date
Hi,

The patch below is intended as a replacement for
gregkh-driver-pm-acquire-device-locks-prior-to-suspending.patch that deadlocked
suspend and hibernation on some systems. The present patch contains some
safeguards against deadlocks in that cases and a mechanism to print warnings
if a deadlock is probable.

I've tested it a little, but the error paths are generally untested.

Please review.

Thanks,
Rafael

---
From: Alan Stern <stern@rowland.harvard.edu>, Rafael J. Wysocki <rjw@sisk.pl>
This patch reorganizes the way suspend and resume notifications are
sent to drivers. The major changes are that now the PM core acquires
every device semaphore before calling the methods, and calls to
device_add() during suspends will fail, while calls to device_del()
during suspends will block.

It also provides a way to safely remove a suspended device with the
help of the PM core, by using the destroy_suspended_device() callback
introduced specifically for this purpose, and updates two drivers (msr
and cpuid) that need to use it.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
---
arch/x86/kernel/cpuid.c | 6
arch/x86/kernel/msr.c | 6
drivers/base/core.c | 79 ++++++-
drivers/base/power/main.c | 494 ++++++++++++++++++++++++++++-----------------
drivers/base/power/power.h | 12 +
include/linux/device.h | 8
6 files changed, 406 insertions(+), 199 deletions(-)
Index: linux-2.6/drivers/base/core.c
===================================================================
--- linux-2.6.orig/drivers/base/core.c
+++ linux-2.6/drivers/base/core.c
@@ -726,11 +726,20 @@ int device_add(struct device *dev)
{
struct device *parent = NULL;
struct class_interface *class_intf;
- int error = -EINVAL;
+ int error;
+
+ error = pm_sleep_lock();
+ if (error) {
+ dev_warn(dev, "Illegal %s during suspend\n", __FUNCTION__);
+ dump_stack();
+ return error;
+ }

dev = get_device(dev);
- if (!dev || !strlen(dev->bus_id))
+ if (!dev || !strlen(dev->bus_id)) {
+ error = -EINVAL;
goto Error;
+ }

pr_debug("DEV: registering device: ID = '%s'\n", dev->bus_id);

@@ -795,6 +804,7 @@ int device_add(struct device *dev)
}
Done:
put_device(dev);
+ pm_sleep_unlock();
return error;
BusError:
device_pm_remove(dev);
@@ -905,6 +915,27 @@ void device_del(struct device * dev)
struct device * parent = dev->parent;
struct class_interface *class_intf;

+ /*
+ * If this function is called during a suspend, it will be blocked by
+ * the PM core holding the device's semaphore at that time, which may
+ * lead to a deadlock. In that case we want to print a warning.
+ * However, it may also be called by the PM core itself with the
+ * device's semaphore released, in which case the warning should not be
+ * printed.
+ */
+ if (down_trylock(&dev->sem)) {
+ if (pm_sleep_lock()) {
+ /* Suspend in progress, we may deadlock */
+ dev_warn(dev, "Illegal %s during suspend\n",
+ __FUNCTION__);
+ dump_stack();
+ } else {
+ pm_sleep_unlock();
+ }
+ } else {
+ up(&dev->sem);
+ }
+
if (parent)
klist_del(&dev->knode_parent);
if (MAJOR(dev->devt))
@@ -1156,14 +1187,11 @@ error:
EXPORT_SYMBOL_GPL(device_create);

/**
- * device_destroy - removes a device that was created with device_create()
+ * find_device - finds a device that was created with device_create()
* @class: pointer to the struct class that this device was registered with
* @devt: the dev_t of the device that was previously registered
- *
- * This call unregisters and cleans up a device that was created with a
- * call to device_create().
*/
-void device_destroy(struct class *class, dev_t devt)
+static struct device *find_device(struct class *class, dev_t devt)
{
struct device *dev = NULL;
struct device *dev_tmp;
@@ -1176,12 +1204,49 @@ void device_destroy(struct class *class,
}
}
up(&class->sem);
+ return dev;
+}
+
+/**
+ * device_destroy - removes a device that was created with device_create()
+ * @class: pointer to the struct class that this device was registered with
+ * @devt: the dev_t of the device that was previously registered
+ *
+ * This call unregisters and cleans up a device that was created with a
+ * call to device_create().
+ */
+void device_destroy(struct class *class, dev_t devt)
+{
+ struct device *dev;

+ dev = find_device(class, devt);
if (dev)
device_unregister(dev);
}
EXPORT_SYMBOL_GPL(device_destroy);

+#ifdef CONFIG_PM_SLEEP
+/**
+ * destroy_suspended_device - asks the PM core to remove a suspended device
+ * @class: pointer to the struct class that this device was registered with
+ * @devt: the dev_t of the device that was previously registered
+ *
+ * This call causes the PM core to release and unregister a suspended device
+ * created with a call to device_create() (devices cannot be unregistered
+ * directly while suspended, since the PM core holds their semaphores at that
+ * time).
+ */
+void destroy_suspended_device(struct class *class, dev_t devt)
+{
+ struct device *dev;
+
+ dev = find_device(class, devt);
+ if (dev)
+ device_pm_destroy_suspended(dev);
+}
+EXPORT_SYMBOL_GPL(destroy_suspended_device);
+#endif /* CONFIG_PM_SLEEP */
+
/**
* device_rename - renames a device
* @dev: the pointer to the struct device to be renamed
Index: linux-2.6/include/linux/device.h
===================================================================
--- linux-2.6.orig/include/linux/device.h
+++ linux-2.6/include/linux/device.h
@@ -521,6 +521,14 @@ extern struct device *device_create(stru
dev_t devt, const char *fmt, ...)
__attribute__((format(printf,4,5)));
extern void device_destroy(struct class *cls, dev_t devt);
+#ifdef CONFIG_PM_SLEEP
+extern void destroy_suspended_device(struct class *cls, dev_t devt);
+#else /* !CONFIG_PM_SLEEP */
+static inline void destroy_suspended_device(struct class *cls, dev_t devt)
+{
+ device_destroy(cls, devt);
+}
+#endif /* !CONFIG_PM_SLEEP */

/*
* Platform "fixup" functions - allow the platform to have their say
Index: linux-2.6/drivers/base/power/power.h
===================================================================
--- linux-2.6.orig/drivers/base/power/power.h
+++ linux-2.6/drivers/base/power/power.h
@@ -20,6 +20,9 @@ static inline struct device *to_device(s

extern void device_pm_add(struct device *);
extern void device_pm_remove(struct device *);
+extern void device_pm_destroy_suspended(struct device *);
+extern int pm_sleep_lock(void);
+extern void pm_sleep_unlock(void);

#else /* CONFIG_PM_SLEEP */

@@ -32,6 +35,15 @@ static inline void device_pm_remove(stru
{
}

+static inline int pm_sleep_lock(void)
+{
+ return 0;
+}
+
+static inline void pm_sleep_unlock(void)
+{
+}
+
#endif

#ifdef CONFIG_PM
Index: linux-2.6/drivers/base/power/main.c
===================================================================
--- linux-2.6.orig/drivers/base/power/main.c
+++ linux-2.6/drivers/base/power/main.c
@@ -24,20 +24,50 @@
#include <linux/mutex.h>
#include <linux/pm.h>
#include <linux/resume-trace.h>
+#include <linux/rwsem.h>

#include "../base.h"
#include "power.h"

+/*
+ * The entries in the dpm_active list are in a depth first order, simply
+ * because children are guaranteed to be discovered after parents, and
+ * are inserted at the back of the list on discovery.
+ *
+ * All the other lists are kept in the same order, for consistency.
+ * However the lists aren't always traversed in the same order.
+ * Semaphores must be acquired from the top (i.e., front) down
+ * and released in the opposite order. Devices must be suspended
+ * from the bottom (i.e., end) up and resumed in the opposite order.
+ * That way no parent will be suspended while it still has an active
+ * child.
+ *
+ * Since device_pm_add() may be called with a device semaphore held,
+ * we must never try to acquire a device semaphore while holding
+ * dpm_list_mutex.
+ */
+
LIST_HEAD(dpm_active);
+static LIST_HEAD(dpm_locked);
static LIST_HEAD(dpm_off);
static LIST_HEAD(dpm_off_irq);

-static DEFINE_MUTEX(dpm_mtx);
static DEFINE_MUTEX(dpm_list_mtx);

-int (*platform_enable_wakeup)(struct device *dev, int is_on);
+static DECLARE_RWSEM(pm_sleep_rwsem);

+/*
+ * As long as this mutex is held, the suspending of devices cannot be started
+ * or the resuming of them cannot be finished (if in progress).
+ */
+static DEFINE_MUTEX(pm_sleep_start_end_mtx);
+
+int (*platform_enable_wakeup)(struct device *dev, int is_on);

+/**
+ * device_pm_add - add a device to the list of active devices
+ * @dev: Device to be added to the list
+ */
void device_pm_add(struct device *dev)
{
pr_debug("PM: Adding info for %s:%s\n",
@@ -48,34 +78,154 @@ void device_pm_add(struct device *dev)
mutex_unlock(&dpm_list_mtx);
}

+/**
+ * device_pm_remove - remove a device from the list of active devices
+ * @dev: Device to be removed from the list
+ *
+ * This function also removes the device's PM-related sysfs attributes.
+ */
void device_pm_remove(struct device *dev)
{
pr_debug("PM: Removing info for %s:%s\n",
dev->bus ? dev->bus->name : "No Bus",
kobject_name(&dev->kobj));
+
+ /* Don't remove a device while the PM core has it locked for suspend */
+ down(&dev->sem);
mutex_lock(&dpm_list_mtx);
dpm_sysfs_remove(dev);
list_del_init(&dev->power.entry);
mutex_unlock(&dpm_list_mtx);
+ up(&dev->sem);
+}
+
+/**
+ * device_pm_destroy_suspended - destroy a suspended device
+ * @dev: Device to destroy
+ *
+ * If called during a suspend, it unlocks the device's semaphore and
+ * unregisters it. Otherwise, the device is unregistered without
+ * releasing the semaphore, but a warning is printed and the stack is
+ * dumped.
+ */
+void device_pm_destroy_suspended(struct device *dev)
+{
+ mutex_lock(&pm_sleep_start_end_mtx);
+ if (down_read_trylock(&pm_sleep_rwsem)) {
+ up_read(&pm_sleep_rwsem);
+ printk(KERN_ERR "PM: Suspend is not in progress in %s!\n",
+ __FUNCTION__);
+ dump_stack();
+ } else {
+ pr_debug("PM: Removing suspended device %s:%s\n",
+ dev->bus ? dev->bus->name : "No Bus",
+ kobject_name(&dev->kobj));
+ mutex_lock(&dpm_list_mtx);
+ list_del_init(&dev->power.entry);
+ mutex_unlock(&dpm_list_mtx);
+ up(&dev->sem);
+ }
+ mutex_unlock(&pm_sleep_start_end_mtx);
+ device_unregister(dev);
+}
+
+/**
+ * pm_sleep_lock - mutual exclusion for registration and suspend
+ *
+ * Returns 0 if no suspend is underway and device registration
+ * may proceed, otherwise -EBUSY.
+ */
+int pm_sleep_lock(void)
+{
+ if (down_read_trylock(&pm_sleep_rwsem))
+ return 0;
+
+ return -EBUSY;
+}
+
+/**
+ * pm_sleep_unlock - mutual exclusion for registration and suspend
+ *
+ * This routine undoes the effect of device_pm_add_lock
+ * when a device's registration is complete.
+ */
+void pm_sleep_unlock(void)
+{
+ up_read(&pm_sleep_rwsem);
}


/*------------------------- Resume routines -------------------------*/

/**
- * resume_device - Restore state for one device.
+ * resume_device_early - Power on one device (early resume).
* @dev: Device.
*
+ * Must be called with interrupts disabled.
*/
-
-static int resume_device(struct device * dev)
+static int resume_device_early(struct device *dev)
{
int error = 0;

TRACE_DEVICE(dev);
TRACE_RESUME(0);

- down(&dev->sem);
+ if (dev->bus && dev->bus->resume_early) {
+ dev_dbg(dev,"EARLY resume\n");
+ error = dev->bus->resume_early(dev);
+ }
+
+ TRACE_RESUME(error);
+ return error;
+}
+
+/**
+ * dpm_power_up - Power on all regular (non-sysdev) devices.
+ *
+ * Walk the dpm_off_irq list and power each device up. This
+ * is used for devices that required they be powered down with
+ * interrupts disabled. As devices are powered on, they are moved
+ * to the dpm_off list.
+ *
+ * Interrupts must be disabled when calling this.
+ */
+static void dpm_power_up(void)
+{
+ while (!list_empty(&dpm_off_irq)) {
+ struct list_head *entry = dpm_off_irq.next;
+ struct device *dev = to_device(entry);
+
+ list_move_tail(entry, &dpm_off);
+ resume_device_early(dev);
+ }
+}
+
+/**
+ * device_power_up - Turn on all devices that need special attention.
+ *
+ * Power on system devices, then devices that required we shut them down
+ * with interrupts disabled.
+ *
+ * Must be called with interrupts disabled.
+ */
+void device_power_up(void)
+{
+ sysdev_resume();
+ dpm_power_up();
+}
+EXPORT_SYMBOL_GPL(device_power_up);
+
+/**
+ * resume_device - Restore state for one device.
+ * @dev: Device.
+ *
+ */
+static int resume_device(struct device *dev)
+{
+ int error = 0;
+
+ TRACE_DEVICE(dev);
+ TRACE_RESUME(0);

if (dev->bus && dev->bus->resume) {
dev_dbg(dev,"resuming\n");
@@ -92,126 +242,70 @@ static int resume_device(struct device *
error = dev->class->resume(dev);
}

- up(&dev->sem);
-
TRACE_RESUME(error);
return error;
}

-
-static int resume_device_early(struct device * dev)
+/**
+ * dpm_resume - Resume every device.
+ *
+ * Resume the devices that have either not gone through
+ * the late suspend, or that did go through it but also
+ * went through the early resume.
+ *
+ * Take devices from the dpm_off_list, resume them,
+ * and put them on the dpm_locked list.
+ */
+static void dpm_resume(void)
{
- int error = 0;
+ while(!list_empty(&dpm_off)) {
+ struct list_head *entry = dpm_off.next;
+ struct device *dev = to_device(entry);

- TRACE_DEVICE(dev);
- TRACE_RESUME(0);
- if (dev->bus && dev->bus->resume_early) {
- dev_dbg(dev,"EARLY resume\n");
- error = dev->bus->resume_early(dev);
+ list_move_tail(entry, &dpm_locked);
+ resume_device(dev);
}
- TRACE_RESUME(error);
- return error;
}

-/*
- * Resume the devices that have either not gone through
- * the late suspend, or that did go through it but also
- * went through the early resume
+/**
+ * unlock_all_devices - Release each device's semaphore
+ *
+ * Go through the dpm_off list. Put each device on the dpm_active
+ * list and unlock it.
*/
-static void dpm_resume(void)
+static void unlock_all_devices(void)
{
mutex_lock(&dpm_list_mtx);
- while(!list_empty(&dpm_off)) {
- struct list_head * entry = dpm_off.next;
- struct device * dev = to_device(entry);
-
- get_device(dev);
- list_move_tail(entry, &dpm_active);
-
- mutex_unlock(&dpm_list_mtx);
- resume_device(dev);
- mutex_lock(&dpm_list_mtx);
- put_device(dev);
- }
+ while (!list_empty(&dpm_locked)) {
+ struct list_head *entry = dpm_locked.prev;
+ struct device *dev = to_device(entry);
+
+ list_move(entry, &dpm_active);
+ up(&dev->sem);
+ }
mutex_unlock(&dpm_list_mtx);
}

-
/**
* device_resume - Restore state of each device in system.
*
- * Walk the dpm_off list, remove each entry, resume the device,
- * then add it to the dpm_active list.
+ * Resume all the devices, unlock them all, and allow new
+ * devices to be registered once again.
*/
-
void device_resume(void)
{
might_sleep();
- mutex_lock(&dpm_mtx);
dpm_resume();
- mutex_unlock(&dpm_mtx);
+ mutex_lock(&pm_sleep_start_end_mtx);
+ unlock_all_devices();
+ up_write(&pm_sleep_rwsem);
+ mutex_unlock(&pm_sleep_start_end_mtx);
}
-
EXPORT_SYMBOL_GPL(device_resume);


-/**
- * dpm_power_up - Power on some devices.
- *
- * Walk the dpm_off_irq list and power each device up. This
- * is used for devices that required they be powered down with
- * interrupts disabled. As devices are powered on, they are moved
- * to the dpm_active list.
- *
- * Interrupts must be disabled when calling this.
- */
-
-static void dpm_power_up(void)
-{
- while(!list_empty(&dpm_off_irq)) {
- struct list_head * entry = dpm_off_irq.next;
- struct device * dev = to_device(entry);
-
- list_move_tail(entry, &dpm_off);
- resume_device_early(dev);
- }
-}
-
-
-/**
- * device_power_up - Turn on all devices that need special attention.
- *
- * Power on system devices then devices that required we shut them down
- * with interrupts disabled.
- * Called with interrupts disabled.
- */
-
-void device_power_up(void)
-{
- sysdev_resume();
- dpm_power_up();
-}
-
-EXPORT_SYMBOL_GPL(device_power_up);
-
-
/*------------------------- Suspend routines -------------------------*/

-/*
- * The entries in the dpm_active list are in a depth first order, simply
- * because children are guaranteed to be discovered after parents, and
- * are inserted at the back of the list on discovery.
- *
- * All list on the suspend path are done in reverse order, so we operate
- * on the leaves of the device tree (or forests, depending on how you want
- * to look at it ;) first. As nodes are removed from the back of the list,
- * they are inserted into the front of their destintation lists.
- *
- * Things are the reverse on the resume path - iterations are done in
- * forward order, and nodes are inserted at the back of their destination
- * lists. This way, the ancestors will be accessed before their descendents.
- */
-
static inline char *suspend_verb(u32 event)
{
switch (event) {
@@ -222,7 +316,6 @@ static inline char *suspend_verb(u32 eve
}
}

-
static void
suspend_device_dbg(struct device *dev, pm_message_t state, char *info)
{
@@ -232,16 +325,70 @@ suspend_device_dbg(struct device *dev, p
}

/**
- * suspend_device - Save state of one device.
+ * suspend_device_late - Shut down one device (late suspend).
* @dev: Device.
* @state: Power state device is entering.
+ *
+ * This is called with interrupts off and only a single CPU running.
*/
+static int suspend_device_late(struct device *dev, pm_message_t state)
+{
+ int error = 0;

-static int suspend_device(struct device * dev, pm_message_t state)
+ if (dev->bus && dev->bus->suspend_late) {
+ suspend_device_dbg(dev, state, "LATE ");
+ error = dev->bus->suspend_late(dev, state);
+ suspend_report_result(dev->bus->suspend_late, error);
+ }
+ return error;
+}
+
+/**
+ * device_power_down - Shut down special devices.
+ * @state: Power state to enter.
+ *
+ * Power down devices that require interrupts to be disabled
+ * and move them from the dpm_off list to the dpm_off_irq list.
+ * Then power down system devices.
+ *
+ * Must be called with interrupts disabled and only one CPU running.
+ */
+int device_power_down(pm_message_t state)
+{
+ int error = 0;
+
+ while (!list_empty(&dpm_off)) {
+ struct list_head *entry = dpm_off.prev;
+ struct device *dev = to_device(entry);
+
+ error = suspend_device_late(dev, state);
+ if (error) {
+ printk(KERN_ERR "Could not power down device %s: "
+ "error %d\n",
+ kobject_name(&dev->kobj), error);
+ break;
+ }
+ if (!list_empty(&dev->power.entry))
+ list_move(&dev->power.entry, &dpm_off_irq);
+ }
+
+ if (!error)
+ error = sysdev_suspend(state);
+ if (error)
+ dpm_power_up();
+ return error;
+}
+EXPORT_SYMBOL_GPL(device_power_down);
+
+/**
+ * suspend_device - Save state of one device.
+ * @dev: Device.
+ * @state: Power state device is entering.
+ */
+int suspend_device(struct device *dev, pm_message_t state)
{
int error = 0;

- down(&dev->sem);
if (dev->power.power_state.event) {
dev_dbg(dev, "PM: suspend %d-->%d\n",
dev->power.power_state.event, state.event);
@@ -264,123 +411,98 @@ static int suspend_device(struct device
error = dev->bus->suspend(dev, state);
suspend_report_result(dev->bus->suspend, error);
}
- up(&dev->sem);
return error;
}

-
-/*
- * This is called with interrupts off, only a single CPU
- * running. We can't acquire a mutex or semaphore (and we don't
- * need the protection)
+/**
+ * dpm_suspend - Suspend every device.
+ * @state: Power state to put each device in.
+ *
+ * Walk the dpm_locked list. Suspend each device and move it
+ * to the dpm_off list.
+ *
+ * (For historical reasons, if it returns -EAGAIN, that used to mean
+ * that the device would be called again with interrupts disabled.
+ * These days, we use the "suspend_late()" callback for that, so we
+ * print a warning and consider it an error).
*/
-static int suspend_device_late(struct device *dev, pm_message_t state)
+static int dpm_suspend(pm_message_t state)
{
int error = 0;

- if (dev->bus && dev->bus->suspend_late) {
- suspend_device_dbg(dev, state, "LATE ");
- error = dev->bus->suspend_late(dev, state);
- suspend_report_result(dev->bus->suspend_late, error);
+ while (!list_empty(&dpm_locked)) {
+ struct list_head *entry = dpm_locked.prev;
+ struct device *dev = to_device(entry);
+
+ error = suspend_device(dev, state);
+ if (error) {
+ printk(KERN_ERR "Could not suspend device %s: "
+ "error %d%s\n",
+ kobject_name(&dev->kobj),
+ error,
+ (error == -EAGAIN ?
+ " (please convert to suspend_late)" :
+ ""));
+ break;
+ }
+ if (!list_empty(&dev->power.entry))
+ list_move(&dev->power.entry, &dpm_off);
}
+
return error;
}

/**
- * device_suspend - Save state and stop all devices in system.
- * @state: Power state to put each device in.
- *
- * Walk the dpm_active list, call ->suspend() for each device, and move
- * it to the dpm_off list.
- *
- * (For historical reasons, if it returns -EAGAIN, that used to mean
- * that the device would be called again with interrupts disabled.
- * These days, we use the "suspend_late()" callback for that, so we
- * print a warning and consider it an error).
- *
- * If we get a different error, try and back out.
- *
- * If we hit a failure with any of the devices, call device_resume()
- * above to bring the suspended devices back to life.
+ * lock_all_devices - Acquire every device's semaphore
*
+ * Go through the dpm_active list. Carefully lock each device's
+ * semaphore and put it in on the dpm_locked list.
*/
-
-int device_suspend(pm_message_t state)
+static void lock_all_devices(void)
{
- int error = 0;
-
- might_sleep();
- mutex_lock(&dpm_mtx);
mutex_lock(&dpm_list_mtx);
- while (!list_empty(&dpm_active) && error == 0) {
- struct list_head * entry = dpm_active.prev;
- struct device * dev = to_device(entry);
-
+ while (!list_empty(&dpm_active)) {
+ struct list_head *entry = dpm_active.next;
+ struct device *dev = to_device(entry);
+
+ /* Required locking order is dev->sem first,
+ * then dpm_list_mutex. Hence this awkward code.
+ */
get_device(dev);
mutex_unlock(&dpm_list_mtx);
-
- error = suspend_device(dev, state);
-
+ down(&dev->sem);
mutex_lock(&dpm_list_mtx);

- /* Check if the device got removed */
- if (!list_empty(&dev->power.entry)) {
- /* Move it to the dpm_off list */
- if (!error)
- list_move(&dev->power.entry, &dpm_off);
- }
- if (error)
- printk(KERN_ERR "Could not suspend device %s: "
- "error %d%s\n",
- kobject_name(&dev->kobj), error,
- error == -EAGAIN ? " (please convert to suspend_late)" : "");
+ if (list_empty(entry))
+ up(&dev->sem); /* Device was removed */
+ else
+ list_move_tail(entry, &dpm_locked);
put_device(dev);
}
mutex_unlock(&dpm_list_mtx);
- if (error)
- dpm_resume();
-
- mutex_unlock(&dpm_mtx);
- return error;
}

-EXPORT_SYMBOL_GPL(device_suspend);
-
/**
- * device_power_down - Shut down special devices.
- * @state: Power state to enter.
+ * device_suspend - Save state and stop all devices in system.
*
- * Walk the dpm_off_irq list, calling ->power_down() for each device that
- * couldn't power down the device with interrupts enabled. When we're
- * done, power down system devices.
+ * Prevent new devices from being registered, then lock all devices
+ * and suspend them.
*/
-
-int device_power_down(pm_message_t state)
+int device_suspend(pm_message_t state)
{
- int error = 0;
- struct device * dev;
-
- while (!list_empty(&dpm_off)) {
- struct list_head * entry = dpm_off.prev;
-
- dev = to_device(entry);
- error = suspend_device_late(dev, state);
- if (error)
- goto Error;
- list_move(&dev->power.entry, &dpm_off_irq);
- }
+ int error;

- error = sysdev_suspend(state);
- Done:
+ might_sleep();
+ mutex_lock(&pm_sleep_start_end_mtx);
+ down_write(&pm_sleep_rwsem);
+ lock_all_devices();
+ mutex_unlock(&pm_sleep_start_end_mtx);
+ error = dpm_suspend(state);
+ if (error)
+ device_resume();
return error;
- Error:
- printk(KERN_ERR "Could not power down device %s: "
- "error %d\n", kobject_name(&dev->kobj), error);
- dpm_power_up();
- goto Done;
}
-
-EXPORT_SYMBOL_GPL(device_power_down);
+EXPORT_SYMBOL_GPL(device_suspend);

void __suspend_report_result(const char *function, void *fn, int ret)
{
Index: linux-2.6/arch/x86/kernel/msr.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/msr.c
+++ linux-2.6/arch/x86/kernel/msr.c
@@ -155,15 +155,15 @@ static int __cpuinit msr_class_cpu_callb

switch (action) {
case CPU_UP_PREPARE:
- case CPU_UP_PREPARE_FROZEN:
err = msr_device_create(cpu);
break;
case CPU_UP_CANCELED:
- case CPU_UP_CANCELED_FROZEN:
case CPU_DEAD:
- case CPU_DEAD_FROZEN:
msr_device_destroy(cpu);
break;
+ case CPU_UP_CANCELED_FROZEN:
+ destroy_suspended_device(msr_class, MKDEV(MSR_MAJOR, cpu));
+ break;
}
return err ? NOTIFY_BAD : NOTIFY_OK;
}
Index: linux-2.6/arch/x86/kernel/cpuid.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/cpuid.c
+++ linux-2.6/arch/x86/kernel/cpuid.c
@@ -157,15 +157,15 @@ static int __cpuinit cpuid_class_cpu_cal

switch (action) {
case CPU_UP_PREPARE:
- case CPU_UP_PREPARE_FROZEN:
err = cpuid_device_create(cpu);
break;
case CPU_UP_CANCELED:
- case CPU_UP_CANCELED_FROZEN:
case CPU_DEAD:
- case CPU_DEAD_FROZEN:
cpuid_device_destroy(cpu);
break;
+ case CPU_UP_CANCELED_FROZEN:
+ destroy_suspended_device(cpuid_class, MKDEV(CPUID_MAJOR, cpu));
+ break;
}
return err ? NOTIFY_BAD : NOTIFY_OK;
}

\
 
 \ /
  Last update: 2008-01-07 02:53    [from the cache]
©2003-2011 Jasper Spaans. Advertise on this site