lkml.org 
[lkml]   [2008]   [Jan]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH] x86: ioport_{32|64}.c unification
Date
From
ioport_{32|64}.c unification.

This patch unifies the code from the ioport_32.c and ioport_64.c files.

Tested and working fine with i386 and x86_64 kernels.

Signed-off-by: Miguel Botón <mboton@gmail.com>

diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 0903bbf..5ed68b4 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -10,7 +10,7 @@ CFLAGS_vsyscall_64.o := $(PROFILING) -g0

obj-y := process_$(BITS).o signal_$(BITS).o entry_$(BITS).o
obj-y += traps_$(BITS).o irq_$(BITS).o
-obj-y += time_$(BITS).o ioport_$(BITS).o ldt.o
+obj-y += time_$(BITS).o ioport.o ldt.o
obj-y += setup_$(BITS).o i8259_$(BITS).o
obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o
obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o
diff --git a/arch/x86/kernel/ioport.c b/arch/x86/kernel/ioport.c
new file mode 100644
index 0000000..be3d521
--- /dev/null
+++ b/arch/x86/kernel/ioport.c
@@ -0,0 +1,138 @@
+/*
+ * This contains the io-permission bitmap code - written by obz, with changes
+ * by Linus. 32/64 bits code unification by Miguel Botón.
+ */
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/capability.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/ioport.h>
+#include <linux/smp.h>
+#include <linux/stddef.h>
+#include <linux/slab.h>
+#include <linux/thread_info.h>
+#include <linux/syscalls.h>
+
+/* Set EXTENT bits starting at BASE in BITMAP to value TURN_ON. */
+static void set_bitmap(unsigned long *bitmap, unsigned int base,
+ unsigned int extent, int new_value)
+{
+ unsigned int i;
+
+ for (i = base; i < base + extent; i++) {
+ if (new_value)
+ __set_bit(i, bitmap);
+ else
+ __clear_bit(i, bitmap);
+ }
+}
+
+/*
+ * this changes the io permissions bitmap in the current task.
+ */
+asmlinkage long sys_ioperm(unsigned long from, unsigned long num, int turn_on)
+{
+ struct thread_struct *t = &current->thread;
+ struct tss_struct *tss;
+ unsigned int i, max_long, bytes, bytes_updated;
+
+ if ((from + num <= from) || (from + num > IO_BITMAP_BITS))
+ return -EINVAL;
+ if (turn_on && !capable(CAP_SYS_RAWIO))
+ return -EPERM;
+
+ /*
+ * If it's the first ioperm() call in this thread's lifetime, set the
+ * IO bitmap up. ioperm() is much less timing critical than clone(),
+ * this is why we delay this operation until now:
+ */
+ if (!t->io_bitmap_ptr) {
+ unsigned long *bitmap = kmalloc(IO_BITMAP_BYTES, GFP_KERNEL);
+
+ if (!bitmap)
+ return -ENOMEM;
+
+ memset(bitmap, 0xff, IO_BITMAP_BYTES);
+ t->io_bitmap_ptr = bitmap;
+ set_thread_flag(TIF_IO_BITMAP);
+ }
+
+ /*
+ * do it in the per-thread copy and in the TSS ...
+ *
+ * Disable preemption via get_cpu() - we must not switch away
+ * because the ->io_bitmap_max value must match the bitmap
+ * contents:
+ */
+ tss = &per_cpu(init_tss, get_cpu());
+
+ set_bitmap(t->io_bitmap_ptr, from, num, !turn_on);
+
+ /*
+ * Search for a (possibly new) maximum. This is simple and stupid,
+ * to keep it obviously correct:
+ */
+ max_long = 0;
+ for (i = 0; i < IO_BITMAP_LONGS; i++)
+ if (t->io_bitmap_ptr[i] != ~0UL)
+ max_long = i;
+
+ bytes = (max_long + 1) * sizeof(unsigned long);
+ bytes_updated = max(bytes, t->io_bitmap_max);
+
+ t->io_bitmap_max = bytes;
+
+#ifdef CONFIG_X86_32
+ /*
+ * Sets the lazy trigger so that the next I/O operation will
+ * reload the correct bitmap.
+ * Reset the owner so that a process switch will not set
+ * tss->io_bitmap_base to IO_BITMAP_OFFSET.
+ */
+ tss->x86_tss.io_bitmap_base = INVALID_IO_BITMAP_OFFSET_LAZY;
+ tss->io_bitmap_owner = NULL;
+#else
+ /* Update the TSS: */
+ memcpy(tss->io_bitmap, t->io_bitmap_ptr, bytes_updated);
+#endif
+
+ put_cpu();
+
+ return 0;
+}
+
+/*
+ * sys_iopl has to be used when you want to access the IO ports
+ * beyond the 0x3ff range: to get the full 65536 ports bitmapped
+ * you'd need 8kB of bitmaps/process, which is a bit excessive.
+ *
+ * Here we just change the flags value on the stack: we allow
+ * only the super-user to do it. This depends on the stack-layout
+ * on system-call entry - see also fork() and the signal handling
+ * code.
+ */
+#ifdef CONFIG_X86_32
+asmlinkage long sys_iopl(unsigned long regsp)
+#else
+asmlinkage long sys_iopl(unsigned int level, struct pt_regs *regs)
+#endif
+{
+#ifdef CONFIG_X86_32
+ volatile struct pt_regs *regs = (struct pt_regs *)&regsp;
+ unsigned int level = regs->bx;
+#endif
+ unsigned int old = (regs->flags >> 12) & 3;
+
+ if (level > 3)
+ return -EINVAL;
+ /* Trying to gain more privileges? */
+ if (level > old) {
+ if (!capable(CAP_SYS_RAWIO))
+ return -EPERM;
+ }
+ regs->flags = (regs->flags & ~X86_EFLAGS_IOPL) | (level << 12);;
+
+ return 0;
+}
diff --git a/arch/x86/kernel/ioport_32.c b/arch/x86/kernel/ioport_32.c
deleted file mode 100644
index 9295e01..0000000
--- a/arch/x86/kernel/ioport_32.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * This contains the io-permission bitmap code - written by obz, with changes
- * by Linus.
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/capability.h>
-#include <linux/errno.h>
-#include <linux/types.h>
-#include <linux/ioport.h>
-#include <linux/smp.h>
-#include <linux/stddef.h>
-#include <linux/slab.h>
-#include <linux/thread_info.h>
-#include <linux/syscalls.h>
-
-/* Set EXTENT bits starting at BASE in BITMAP to value TURN_ON. */
-static void set_bitmap(unsigned long *bitmap, unsigned int base,
- unsigned int extent, int new_value)
-{
- unsigned int i;
-
- for (i = base; i < base + extent; i++) {
- if (new_value)
- __set_bit(i, bitmap);
- else
- __clear_bit(i, bitmap);
- }
-}
-
-/*
- * this changes the io permissions bitmap in the current task.
- */
-asmlinkage long sys_ioperm(unsigned long from, unsigned long num, int turn_on)
-{
- struct thread_struct * t = &current->thread;
- struct tss_struct * tss;
- unsigned long i, max_long;
-
- if ((from + num <= from) || (from + num > IO_BITMAP_BITS))
- return -EINVAL;
- if (turn_on && !capable(CAP_SYS_RAWIO))
- return -EPERM;
-
- /*
- * If it's the first ioperm() call in this thread's lifetime, set the
- * IO bitmap up. ioperm() is much less timing critical than clone(),
- * this is why we delay this operation until now:
- */
- if (!t->io_bitmap_ptr) {
- unsigned long *bitmap = kmalloc(IO_BITMAP_BYTES, GFP_KERNEL);
-
- if (!bitmap)
- return -ENOMEM;
-
- memset(bitmap, 0xff, IO_BITMAP_BYTES);
- t->io_bitmap_ptr = bitmap;
- set_thread_flag(TIF_IO_BITMAP);
- }
-
- /*
- * do it in the per-thread copy and in the TSS ...
- *
- * Disable preemption via get_cpu() - we must not switch away
- * because the ->io_bitmap_max value must match the bitmap
- * contents:
- */
- tss = &per_cpu(init_tss, get_cpu());
-
- set_bitmap(t->io_bitmap_ptr, from, num, !turn_on);
-
- /*
- * Search for a (possibly new) maximum. This is simple and stupid,
- * to keep it obviously correct:
- */
- max_long = 0;
- for (i = 0; i < IO_BITMAP_LONGS; i++)
- if (t->io_bitmap_ptr[i] != ~0UL)
- max_long = i;
-
- t->io_bitmap_max = (max_long + 1) * sizeof(unsigned long);
-
- /*
- * Sets the lazy trigger so that the next I/O operation will
- * reload the correct bitmap.
- * Reset the owner so that a process switch will not set
- * tss->io_bitmap_base to IO_BITMAP_OFFSET.
- */
- tss->x86_tss.io_bitmap_base = INVALID_IO_BITMAP_OFFSET_LAZY;
- tss->io_bitmap_owner = NULL;
-
- put_cpu();
-
- return 0;
-}
-
-/*
- * sys_iopl has to be used when you want to access the IO ports
- * beyond the 0x3ff range: to get the full 65536 ports bitmapped
- * you'd need 8kB of bitmaps/process, which is a bit excessive.
- *
- * Here we just change the flags value on the stack: we allow
- * only the super-user to do it. This depends on the stack-layout
- * on system-call entry - see also fork() and the signal handling
- * code.
- */
-
-asmlinkage long sys_iopl(unsigned long regsp)
-{
- volatile struct pt_regs *regs = (struct pt_regs *)&regsp;
- unsigned int level = regs->bx;
- unsigned int old = (regs->flags >> 12) & 3;
- struct thread_struct *t = &current->thread;
-
- if (level > 3)
- return -EINVAL;
- /* Trying to gain more privileges? */
- if (level > old) {
- if (!capable(CAP_SYS_RAWIO))
- return -EPERM;
- }
-
- t->iopl = level << 12;
- regs->flags = (regs->flags & ~X86_EFLAGS_IOPL) | t->iopl;
- set_iopl_mask(t->iopl);
-
- return 0;
-}
diff --git a/arch/x86/kernel/ioport_64.c b/arch/x86/kernel/ioport_64.c
deleted file mode 100644
index ff7514b..0000000
--- a/arch/x86/kernel/ioport_64.c
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * This contains the io-permission bitmap code - written by obz, with changes
- * by Linus.
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/capability.h>
-#include <linux/errno.h>
-#include <linux/types.h>
-#include <linux/ioport.h>
-#include <linux/smp.h>
-#include <linux/stddef.h>
-#include <linux/slab.h>
-#include <linux/thread_info.h>
-#include <linux/syscalls.h>
-
-/* Set EXTENT bits starting at BASE in BITMAP to value TURN_ON. */
-static void set_bitmap(unsigned long *bitmap, unsigned int base, unsigned int extent, int new_value)
-{
- int i;
- if (new_value)
- for (i = base; i < base + extent; i++)
- __set_bit(i, bitmap);
- else
- for (i = base; i < base + extent; i++)
- clear_bit(i, bitmap);
-}
-
-/*
- * this changes the io permissions bitmap in the current task.
- */
-asmlinkage long sys_ioperm(unsigned long from, unsigned long num, int turn_on)
-{
- unsigned int i, max_long, bytes, bytes_updated;
- struct thread_struct * t = &current->thread;
- struct tss_struct * tss;
- unsigned long *bitmap;
-
- if ((from + num <= from) || (from + num > IO_BITMAP_BITS))
- return -EINVAL;
- if (turn_on && !capable(CAP_SYS_RAWIO))
- return -EPERM;
-
- /*
- * If it's the first ioperm() call in this thread's lifetime, set the
- * IO bitmap up. ioperm() is much less timing critical than clone(),
- * this is why we delay this operation until now:
- */
- if (!t->io_bitmap_ptr) {
- bitmap = kmalloc(IO_BITMAP_BYTES, GFP_KERNEL);
- if (!bitmap)
- return -ENOMEM;
-
- memset(bitmap, 0xff, IO_BITMAP_BYTES);
- t->io_bitmap_ptr = bitmap;
- set_thread_flag(TIF_IO_BITMAP);
- }
-
- /*
- * do it in the per-thread copy and in the TSS ...
- *
- * Disable preemption via get_cpu() - we must not switch away
- * because the ->io_bitmap_max value must match the bitmap
- * contents:
- */
- tss = &per_cpu(init_tss, get_cpu());
-
- set_bitmap(t->io_bitmap_ptr, from, num, !turn_on);
-
- /*
- * Search for a (possibly new) maximum. This is simple and stupid,
- * to keep it obviously correct:
- */
- max_long = 0;
- for (i = 0; i < IO_BITMAP_LONGS; i++)
- if (t->io_bitmap_ptr[i] != ~0UL)
- max_long = i;
-
- bytes = (max_long + 1) * sizeof(long);
- bytes_updated = max(bytes, t->io_bitmap_max);
-
- t->io_bitmap_max = bytes;
-
- /* Update the TSS: */
- memcpy(tss->io_bitmap, t->io_bitmap_ptr, bytes_updated);
-
- put_cpu();
-
- return 0;
-}
-
-/*
- * sys_iopl has to be used when you want to access the IO ports
- * beyond the 0x3ff range: to get the full 65536 ports bitmapped
- * you'd need 8kB of bitmaps/process, which is a bit excessive.
- *
- * Here we just change the flags value on the stack: we allow
- * only the super-user to do it. This depends on the stack-layout
- * on system-call entry - see also fork() and the signal handling
- * code.
- */
-
-asmlinkage long sys_iopl(unsigned int level, struct pt_regs *regs)
-{
- unsigned int old = (regs->flags >> 12) & 3;
-
- if (level > 3)
- return -EINVAL;
- /* Trying to gain more privileges? */
- if (level > old) {
- if (!capable(CAP_SYS_RAWIO))
- return -EPERM;
- }
- regs->flags = (regs->flags &~ X86_EFLAGS_IOPL) | (level << 12);
- return 0;
-}

--
Miguel Botón
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2008-01-06 01:09    [W:0.058 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site