lkml.org 
[lkml]   [2008]   [Jan]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [BUG] 2.6.24-git usb reset problems
On Tue, Jan 29 2008 at 20:48 +0200, James Bottomley <James.Bottomley@HansenPartnership.com> wrote:
> On Tue, 2008-01-29 at 20:27 +0200, Boaz Harrosh wrote:
>> On Tue, Jan 29 2008 at 18:34 +0200, James Bottomley <James.Bottomley@HansenPartnership.com> wrote:
>>> On Tue, 2008-01-29 at 10:36 -0500, Alan Stern wrote:
>>>> On Tue, 29 Jan 2008, Boaz Harrosh wrote:
>>>>
>>>>> --- a/drivers/usb/storage/transport.c
>>>>> +++ b/drivers/usb/storage/transport.c
>>>>> @@ -462,18 +462,24 @@ static int usb_stor_bulk_transfer_sglist(struct us_data *us, unsigned int pipe,
>>>>> * Common used function. Transfer a complete command
>>>>> * via usb_stor_bulk_transfer_sglist() above. Set cmnd resid
>>>>> */
>>>>> -int usb_stor_bulk_srb(struct us_data* us, unsigned int pipe,
>>>>> - struct scsi_cmnd* srb)
>>>>> +int usb_stor_bulk_srb_length(struct us_data* us, unsigned int pipe,
>>>>> + struct scsi_cmnd* srb, unsigned length)
>>>>> {
>>>>> unsigned int partial;
>>>>> int result = usb_stor_bulk_transfer_sglist(us, pipe, scsi_sglist(srb),
>>>>> - scsi_sg_count(srb), scsi_bufflen(srb),
>>>>> + scsi_sg_count(srb), length,
>>>>> &partial);
>>>>>
>>>>> scsi_set_resid(srb, scsi_bufflen(srb) - partial);
>>>>> return result;
>>>>> }
>>>>>
>>>>> +int usb_stor_bulk_srb(struct us_data* us, unsigned int pipe,
>>>>> + struct scsi_cmnd* srb)
>>>>> +{
>>>>> + return usb_stor_bulk_srb_length(us, pipe, srb, scsi_bufflen(srb));
>>>>> +}
>>>>> +
>>>> I don't like this patch very much. Why add another layer of
>>>> indirection when the two subroutines do hardly any work? Leave
>>>> usb_stor_bulk_srb() the way it was, and add usb_stor_bulk_srb_length()
>>>> as a separate routine that simply calls usb_stor_bulk_transfer_sglist()
>>>> and scsi_set_resid().
>>>>
>>>> BTW, the standard coding style calls for a blank line after the list of
>>>> local variables at the start of a function or block.
>>> There's another bug in the transport.c conversion in that the residuals
>>> are updated with bogus data in several error cases, since
>>> usb_stor_bulk_transfer_sglist() only sets the actual length if the urb
>>> is actually sent.
>>>
>>> I'm not sure if this is is the solution to the problem at hand, but it
>>> definitely fixes another bug in the code.
>>>
>>> James
>>>
>>> diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
>>> index d9f4912..bab0858 100644
>>> --- a/drivers/usb/storage/transport.c
>>> +++ b/drivers/usb/storage/transport.c
>>> @@ -465,7 +465,7 @@ static int usb_stor_bulk_transfer_sglist(struct us_data *us, unsigned int pipe,
>>> int usb_stor_bulk_srb(struct us_data* us, unsigned int pipe,
>>> struct scsi_cmnd* srb)
>>> {
>>> - unsigned int partial;
>>> + unsigned int partial = scsi_get_resid(srb);
>>> int result = usb_stor_bulk_transfer_sglist(us, pipe, scsi_sglist(srb),
>>> scsi_sg_count(srb), scsi_bufflen(srb),
>>> &partial);
>>>
>>>
>>> -
>> But then this is weird because it is not what usb_stor_bulk_transfer_sg() is doing
>> which was the one called before.
>
> Um, yes it was. The original code did this
>
> sb_stor_bulk_transfer_sg(..., &srp->resid, ...)
>
> Which was at liberty not to touch resid, which it chose not to do in the
> error legs.
>
> Your new code does
>
> int partial; <- stack uninitialised
> sb_stor_bulk_transfer_sglist(..., &partial, ...);
> scsi_set_resid(srb, scsi_bufflen(srb) - partial);
>
> If the function doesn't touch partial, as it doesn't in the error legs,
> resid now gets set with rubbish.
>
> Actually, my code is still wrong .. we have to set it to
> scsi_bufflen(srb) - scsi_resid(srb) so that it comes back the same if
> left untouched.
>
>> I have such a device and I get one reset but then every thing works nice.
>> This is with debug on. I'll try to make it fail.
>
> James
>
>
Sorry I still don't see it.

original code did sb_stor_bulk_transfer_sg(..., &srp->resid, ...)

but sb_stor_bulk_transfer_sg does the:
int partial; <- stack uninitialised
sb_stor_bulk_transfer_sglist(..., &partial, ...);

and then unconditionally sets *residual = length_left;
I do not see an "error legs" case in sb_stor_bulk_transfer_sg().

I have just cut and pasted the !use_sg from sb_stor_bulk_transfer_sg names
and all

Boaz



\
 
 \ /
  Last update: 2008-01-29 20:01    [W:0.079 / U:0.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site