lkml.org 
[lkml]   [2008]   [Jan]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [2.6.24 REGRESSION] BUG: Soft lockup - with VFS
    and so then dmesg ..

    --
    Thanks,
    Oliver
    Initializing cgroup subsys cpuset
    Linux version 2.6.24-szami2 (root@pancs) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #2 SMP Sun Jan 27 01:47:58 CET 2008
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000001ff30000 (usable)
    BIOS-e820: 000000001ff30000 - 000000001ff40000 (ACPI data)
    BIOS-e820: 000000001ff40000 - 000000001fff0000 (ACPI NVS)
    BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved)
    BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
    0MB HIGHMEM available.
    511MB LOWMEM available.
    found SMP MP-table at 000ff780
    Entering add_active_range(0, 0, 130864) 0 entries of 256 used
    Zone PFN ranges:
    DMA 0 -> 4096
    Normal 4096 -> 130864
    HighMem 130864 -> 130864
    Movable zone start PFN for each node
    early_node_map[1] active PFN ranges
    0: 0 -> 130864
    On node 0 totalpages: 130864
    DMA zone: 56 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 4040 pages, LIFO batch:0
    Normal zone: 1733 pages used for memmap
    Normal zone: 125035 pages, LIFO batch:31
    HighMem zone: 0 pages used for memmap
    Movable zone: 0 pages used for memmap
    DMI 2.3 present.
    ACPI: RSDP 000F9E30, 0021 (r2 ACPIAM)
    ACPI: XSDT 1FF30100, 003C (r1 A M I OEMXSDT 10000414 MSFT 97)
    ACPI: FACP 1FF30290, 00F4 (r3 A M I OEMFACP 10000414 MSFT 97)
    ACPI: DSDT 1FF303F0, 3779 (r1 P4C8B P4C8B106 106 INTL 2002026)
    ACPI: FACS 1FF40000, 0040
    ACPI: APIC 1FF30390, 005C (r1 A M I OEMAPIC 10000414 MSFT 97)
    ACPI: OEMB 1FF40040, 003F (r1 A M I OEMBIOS 10000414 MSFT 97)
    ACPI: PM-Timer IO Port: 0x808
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Processor #0 15:2 APIC version 20
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    Processor #1 15:2 APIC version 20
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Enabling APIC mode: Flat. Using 1 I/O APICs
    Using ACPI (MADT) for SMP configuration information
    Allocating PCI resources starting at 30000000 (gap: 20000000:dfb80000)
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129075
    Kernel command line: BOOT_IMAGE=deb_s2.6.24 ro root=803 1
    mapped APIC to ffffb000 (fee00000)
    mapped IOAPIC to ffffa000 (fec00000)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 2048 (order: 11, 8192 bytes)
    Detected 3150.239 MHz processor.
    Console: colour VGA+ 132x44
    console [tty0] enabled
    Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
    ... MAX_LOCKDEP_SUBCLASSES: 8
    ... MAX_LOCK_DEPTH: 30
    ... MAX_LOCKDEP_KEYS: 2048
    ... CLASSHASH_SIZE: 1024
    ... MAX_LOCKDEP_ENTRIES: 8192
    ... MAX_LOCKDEP_CHAINS: 16384
    ... CHAINHASH_SIZE: 8192
    memory used by lock dependency info: 1024 kB
    per task-struct memory footprint: 1680 bytes
    ------------------------
    | Locking API testsuite:
    ----------------------------------------------------------------------------
    | spin |wlock |rlock |mutex | wsem | rsem |
    --------------------------------------------------------------------------
    A-A deadlock: ok | ok | ok | ok | ok | ok |
    A-B-B-A deadlock: ok | ok | ok | ok | ok | ok |
    A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok |
    A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok |
    A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
    A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
    A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok |
    double unlock: ok | ok | ok | ok | ok | ok |
    initialize held: ok | ok | ok | ok | ok | ok |
    bad unlock order: ok | ok | ok | ok | ok | ok |
    --------------------------------------------------------------------------
    recursive read-lock: | ok | | ok |
    recursive read-lock #2: | ok | | ok |
    mixed read-write-lock: | ok | | ok |
    mixed write-read-lock: | ok | | ok |
    --------------------------------------------------------------------------
    hard-irqs-on + irq-safe-A/12: ok | ok | ok |
    soft-irqs-on + irq-safe-A/12: ok | ok | ok |
    hard-irqs-on + irq-safe-A/21: ok | ok | ok |
    soft-irqs-on + irq-safe-A/21: ok | ok | ok |
    sirq-safe-A => hirqs-on/12: ok | ok | ok |
    sirq-safe-A => hirqs-on/21: ok | ok | ok |
    hard-safe-A + irqs-on/12: ok | ok | ok |
    soft-safe-A + irqs-on/12: ok | ok | ok |
    hard-safe-A + irqs-on/21: ok | ok | ok |
    soft-safe-A + irqs-on/21: ok | ok | ok |
    hard-safe-A + unsafe-B #1/123: ok | ok | ok |
    soft-safe-A + unsafe-B #1/123: ok | ok | ok |
    hard-safe-A + unsafe-B #1/132: ok | ok | ok |
    soft-safe-A + unsafe-B #1/132: ok | ok | ok |
    hard-safe-A + unsafe-B #1/213: ok | ok | ok |
    soft-safe-A + unsafe-B #1/213: ok | ok | ok |
    hard-safe-A + unsafe-B #1/231: ok | ok | ok |
    soft-safe-A + unsafe-B #1/231: ok | ok | ok |
    hard-safe-A + unsafe-B #1/312: ok | ok | ok |
    soft-safe-A + unsafe-B #1/312: ok | ok | ok |
    hard-safe-A + unsafe-B #1/321: ok | ok | ok |
    soft-safe-A + unsafe-B #1/321: ok | ok | ok |
    hard-safe-A + unsafe-B #2/123: ok | ok | ok |
    soft-safe-A + unsafe-B #2/123: ok | ok | ok |
    hard-safe-A + unsafe-B #2/132: ok | ok | ok |
    soft-safe-A + unsafe-B #2/132: ok | ok | ok |
    hard-safe-A + unsafe-B #2/213: ok | ok | ok |
    soft-safe-A + unsafe-B #2/213: ok | ok | ok |
    hard-safe-A + unsafe-B #2/231: ok | ok | ok |
    soft-safe-A + unsafe-B #2/231: ok | ok | ok |
    hard-safe-A + unsafe-B #2/312: ok | ok | ok |
    soft-safe-A + unsafe-B #2/312: ok | ok | ok |
    hard-safe-A + unsafe-B #2/321: ok | ok | ok |
    soft-safe-A + unsafe-B #2/321: ok | ok | ok |
    hard-irq lock-inversion/123: ok | ok | ok |
    soft-irq lock-inversion/123: ok | ok | ok |
    hard-irq lock-inversion/132: ok | ok | ok |
    soft-irq lock-inversion/132: ok | ok | ok |
    hard-irq lock-inversion/213: ok | ok | ok |
    soft-irq lock-inversion/213: ok | ok | ok |
    hard-irq lock-inversion/231: ok | ok | ok |
    soft-irq lock-inversion/231: ok | ok | ok |
    hard-irq lock-inversion/312: ok | ok | ok |
    soft-irq lock-inversion/312: ok | ok | ok |
    hard-irq lock-inversion/321: ok | ok | ok |
    soft-irq lock-inversion/321: ok | ok | ok |
    hard-irq read-recursion/123: ok |
    soft-irq read-recursion/123: ok |
    hard-irq read-recursion/132: ok |
    soft-irq read-recursion/132: ok |
    hard-irq read-recursion/213: ok |
    soft-irq read-recursion/213: ok |
    hard-irq read-recursion/231: ok |
    soft-irq read-recursion/231: ok |
    hard-irq read-recursion/312: ok |
    soft-irq read-recursion/312: ok |
    hard-irq read-recursion/321: ok |
    soft-irq read-recursion/321: ok |
    -------------------------------------------------------
    Good, all 218 testcases passed! |
    ---------------------------------
    Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    Memory: 499208k/523456k available (3833k kernel code, 23708k reserved, 1404k data, 540k init, 0k highmem)
    virtual kernel memory layout:
    fixmap : 0xfff4a000 - 0xfffff000 ( 724 kB)
    pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
    vmalloc : 0xe0800000 - 0xffbfe000 ( 499 MB)
    lowmem : 0xc0000000 - 0xdff30000 ( 511 MB)
    .init : 0xc0624000 - 0xc06ab000 ( 540 kB)
    .data : 0xc04be514 - 0xc061d534 (1404 kB)
    .text : 0xc0100000 - 0xc04be514 (3833 kB)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
    Calibrating delay using timer specific routine.. 6306.19 BogoMIPS (lpj=31530951)
    Security Framework initialized
    SELinux: Initializing.
    SELinux: Starting in permissive mode
    selinux_register_security: Registering secondary module capability
    Capability LSM initialized as secondary
    Mount-cache hash table entries: 512
    Initializing cgroup subsys debug
    Initializing cgroup subsys ns
    Initializing cgroup subsys cpuacct
    CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 00000000
    CPU: Trace cache: 12K uops, L1 D cache: 8K
    CPU: L2 cache: 512K
    CPU: Physical Processor ID: 0
    CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b080 00004400 00000000 00000000 00000000
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
    CPU0: Thermal monitoring enabled
    Compat vDSO mapped to ffffe000.
    Checking 'hlt' instruction... OK.
    Freeing SMP alternatives: 14k freed
    ACPI: Core revision 20070126
    CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09
    lockdep: not fixing up alternatives.
    Booting processor 1/1 eip 2000
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 6300.12 BogoMIPS (lpj=31500600)
    CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 00000000
    CPU: Trace cache: 12K uops, L1 D cache: 8K
    CPU: L2 cache: 512K
    CPU: Physical Processor ID: 0
    CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b080 00004400 00000000 00000000 00000000
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#1.
    CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
    CPU1: Thermal monitoring enabled
    CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09
    Total of 2 processors activated (12606.31 BogoMIPS).
    ENABLING IO-APIC IRQs
    ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
    checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    Brought up 2 CPUs
    CPU0 attaching sched-domain:
    domain 0: span 3
    groups: 1 2
    domain 1: span 3
    groups: 3
    CPU1 attaching sched-domain:
    domain 0: span 3
    groups: 2 1
    domain 1: span 3
    groups: 3
    khelper used greatest stack depth: 7108 bytes left
    khelper used greatest stack depth: 7036 bytes left
    net_namespace: 80 bytes
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: Using configuration type 1
    Setting up standard PCI resources
    ACPI: EC: Look up EC in DSDT
    ACPI: Interpreter enabled
    ACPI: (supports S0 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    Force enabled HPET at base address 0xfed00000
    PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
    PCI quirk: region 0480-04bf claimed by ICH4 GPIO
    PCI: Transparent bridge - 0000:00:1e.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 10 devices
    ACPI: ACPI bus type pnp unregistered
    SCSI subsystem initialized
    libata version 3.00 loaded.
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    hpet clockevent registered
    hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    hpet0: 3 64-bit timers, 14318180 Hz
    ACPI: RTC can wake from S4
    Time: tsc clocksource has been installed.
    system 00:06: ioport range 0x680-0x6ff has been reserved
    system 00:06: ioport range 0x290-0x297 has been reserved
    system 00:07: ioport range 0x4d0-0x4d1 has been reserved
    system 00:07: ioport range 0x800-0x87f has been reserved
    system 00:07: ioport range 0x480-0x4bf has been reserved
    system 00:07: iomem range 0xfed20000-0xfed8ffff has been reserved
    system 00:07: iomem range 0xffb00000-0xffbfffff could not be reserved
    system 00:08: iomem range 0xfec00000-0xfec00fff has been reserved
    system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
    system 00:09: iomem range 0x0-0x9ffff could not be reserved
    system 00:09: iomem range 0xc0000-0xdffff could not be reserved
    system 00:09: iomem range 0xe0000-0xfffff could not be reserved
    system 00:09: iomem range 0x100000-0x1ffeffff could not be reserved
    system 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
    PCI: Bridge: 0000:00:01.0
    IO window: c000-cfff
    MEM window: fe900000-fe9fffff
    PREFETCH window: bbf00000-fbefffff
    PCI: Bridge: 0000:00:1e.0
    IO window: d000-dfff
    MEM window: fea00000-feafffff
    PREFETCH window: disabled.
    PCI: Setting latency timer of device 0000:00:1e.0 to 64
    NET: Registered protocol family 2
    IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
    TCP established hash table entries: 16384 (order: 5, 131072 bytes)
    TCP bind hash table entries: 16384 (order: 7, 589824 bytes)
    TCP: Hash tables configured (established 16384 bind 16384)
    TCP reno registered
    Machine check exception polling timer started.
    IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
    audit: initializing netlink socket (disabled)
    audit(1201472922.779:1): initialized
    Total HugeTLB memory allocated, 0
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
    SGI XFS Quota Management subsystem
    SELinux: Registering netfilter hooks
    io scheduler noop registered
    io scheduler cfq registered (default)
    Boot video device is 0000:01:00.0
    input: Power Button (FF) as /class/input/input0
    ACPI: Power Button (FF) [PWRF]
    input: Power Button (CM) as /class/input/input1
    ACPI: Power Button (CM) [PWRB]
    Non-volatile memory driver v1.2
    intel_rng: FWH not detected
    Linux agpgart interface v0.102
    agpgart: Detected an Intel i875 Chipset.
    agpgart: AGP aperture is 32M @ 0xfc000000
    [drm] Initialized drm 1.1.0 20060810
    ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
    [drm] Initialized radeon 1.28.0 20060524 on minor 0
    Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
    Hangcheck: Using get_cycles().
    loop: module loaded
    usbcore: registered new interface driver ub
    ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 22 (level, low) -> IRQ 17
    skge 1.13 addr 0xfeafc000 irq 17 chip Yukon rev 1
    skge eth0: addr 00:0e:a6:88:6f:05
    ath_rate_minstrel: Minstrel automatic rate control algorithm 1.2 (svn r3262)
    ath_rate_minstrel: look around rate set to 10%
    ath_rate_minstrel: EWMA rolloff level set to 75%
    ath_rate_minstrel: max segment size in the mrr set to 6000 us
    ath_pci: svn r3262
    ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 17
    Switched to NOHz mode on CPU #0
    Switched to NOHz mode on CPU #1
    HAL returned 27 channels.
    Channel 1 (2412 MHz) Max Tx Power 18 dBm (hw limited) [18 hw 20 reg] Flags CF_CCK CF_2GHZ
    Channel 1 (2412 MHz) Max Tx Power 18 dBm (hw limited) [18 hw 20 reg] Flags CF_OFDM CF_2GHZ
    Channel 2 (2417 MHz) Max Tx Power 18 dBm (hw limited) [18 hw 20 reg] Flags CF_CCK CF_2GHZ
    Channel 2 (2417 MHz) Max Tx Power 18 dBm (hw limited) [18 hw 20 reg] Flags CF_OFDM CF_2GHZ
    Channel 3 (2422 MHz) Max Tx Power 18 dBm (hw limited) [18 hw 20 reg] Flags CF_CCK CF_2GHZ
    Channel 3 (2422 MHz) Max Tx Power 18 dBm (hw limited) [18 hw 20 reg] Flags CF_OFDM CF_2GHZ
    Channel 4 (2427 MHz) Max Tx Power 18 dBm (hw limited) [18 hw 20 reg] Flags CF_CCK CF_2GHZ
    Channel 4 (2427 MHz) Max Tx Power 18 dBm (hw limited) [18 hw 20 reg] Flags CF_OFDM CF_2GHZ
    Channel 5 (2432 MHz) Max Tx Power 18 dBm (hw limited) [18 hw 20 reg] Flags CF_CCK CF_2GHZ
    Channel 5 (2432 MHz) Max Tx Power 18 dBm (hw limited) [18 hw 20 reg] Flags CF_OFDM CF_2GHZ
    Channel 6 (2437 MHz) Max Tx Power 18 dBm (hw limited) [18 hw 20 reg] Flags CF_CCK CF_2GHZ
    Channel 6 (2437 MHz) Max Tx Power 18 dBm (hw limited) [18 hw 20 reg] Flags CF_OFDM CF_2GHZ
    Channel 6 (2437 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_TURBO CF_OFDM CF_2GHZ
    Channel 7 (2442 MHz) Max Tx Power 18 dBm (hw limited) [18 hw 20 reg] Flags CF_CCK CF_2GHZ
    Channel 7 (2442 MHz) Max Tx Power 18 dBm (hw limited) [18 hw 20 reg] Flags CF_OFDM CF_2GHZ
    Channel 8 (2447 MHz) Max Tx Power 18 dBm (hw limited) [18 hw 20 reg] Flags CF_CCK CF_2GHZ
    Channel 8 (2447 MHz) Max Tx Power 18 dBm (hw limited) [18 hw 20 reg] Flags CF_OFDM CF_2GHZ
    Channel 9 (2452 MHz) Max Tx Power 18 dBm (hw limited) [18 hw 20 reg] Flags CF_CCK CF_2GHZ
    Channel 9 (2452 MHz) Max Tx Power 18 dBm (hw limited) [18 hw 20 reg] Flags CF_OFDM CF_2GHZ
    Channel 10 (2457 MHz) Max Tx Power 18 dBm (hw limited) [18 hw 20 reg] Flags CF_CCK CF_2GHZ
    Channel 10 (2457 MHz) Max Tx Power 18 dBm (hw limited) [18 hw 20 reg] Flags CF_OFDM CF_2GHZ
    Channel 11 (2462 MHz) Max Tx Power 18 dBm (hw limited) [18 hw 20 reg] Flags CF_CCK CF_2GHZ
    Channel 11 (2462 MHz) Max Tx Power 18 dBm (hw limited) [18 hw 20 reg] Flags CF_OFDM CF_2GHZ
    Channel 12 (2467 MHz) Max Tx Power 18 dBm (hw limited) [18 hw 20 reg] Flags CF_CCK CF_2GHZ
    Channel 12 (2467 MHz) Max Tx Power 18 dBm (hw limited) [18 hw 20 reg] Flags CF_OFDM CF_2GHZ
    Channel 13 (2472 MHz) Max Tx Power 18 dBm (hw limited) [18 hw 20 reg] Flags CF_CCK CF_2GHZ
    Channel 13 (2472 MHz) Max Tx Power 18 dBm (hw limited) [18 hw 20 reg] Flags CF_OFDM CF_2GHZ
    ath_pci: switching rfkill capability off
    ath_pci: switching per-packet transmit power control off
    wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
    wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
    wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
    wifi0: H/W encryption support: WEP AES AES_CCM TKIP
    wifi0: mac 7.9 phy 4.5 radio 5.6
    wifi0: Use hw queue 1 for WME_AC_BE traffic
    wifi0: Use hw queue 0 for WME_AC_BK traffic
    wifi0: Use hw queue 2 for WME_AC_VI traffic
    wifi0: Use hw queue 3 for WME_AC_VO traffic
    wifi0: Use hw queue 8 for CAB traffic
    wifi0: Use hw queue 9 for beacons
    Unable to load needed module: wlan_scan_sta; no support for automatic module loading
    unable to load wlan_scan_sta
    wifi0: Atheros 5212: mem=0xfeae0000, irq=17
    ath_hal: 0.9.30.13 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
    wlan: svn r3262
    wlan: mac acl policy registered
    Driver 'sd' needs updating - please use bus_type methods
    Driver 'sr' needs updating - please use bus_type methods
    ata_piix 0000:00:1f.1: version 2.12
    PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
    ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:1f.1 to 64
    scsi0 : ata_piix
    scsi1 : ata_piix
    ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
    ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
    ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-4163B, A103, max UDMA/33
    ata2.00: configured for UDMA/33
    scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4163B A103 PQ: 0 ANSI: 5
    sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    sr 1:0:0:0: Attached scsi generic sg0 type 5
    ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
    ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:1f.2 to 64
    scsi2 : ata_piix
    scsi3 : ata_piix
    ata3: SATA max UDMA/133 cmd 0xefe0 ctl 0xefac bmdma 0xef60 irq 18
    ata4: SATA max UDMA/133 cmd 0xefa0 ctl 0xefa8 bmdma 0xef68 irq 18
    ata4.00: ATA-7: SAMSUNG SP1213C, SV100-27, max UDMA7
    ata4.00: 234493056 sectors, multi 16: LBA48
    ata4.00: configured for UDMA/133
    scsi 3:0:0:0: Direct-Access ATA SAMSUNG SP1213C SV10 PQ: 0 ANSI: 5
    sd 3:0:0:0: [sda] 234493056 512-byte hardware sectors (120060 MB)
    sd 3:0:0:0: [sda] Write Protect is off
    sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 3:0:0:0: [sda] 234493056 512-byte hardware sectors (120060 MB)
    sd 3:0:0:0: [sda] Write Protect is off
    sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3 sda4
    sd 3:0:0:0: [sda] Attached SCSI disk
    sd 3:0:0:0: Attached scsi generic sg1 type 0
    ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19
    PCI: Setting latency timer of device 0000:00:1d.7 to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:1d.7: debug port 1
    PCI: cache line size of 128 is not supported by device 0000:00:1d.7
    ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfebffc00
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 4 ports detected
    USB Universal Host Controller Interface driver v3.0
    ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:1d.0 to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ef00
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
    PCI: Setting latency timer of device 0000:00:1d.1 to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000ef20
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    usb 2-1: new low speed USB device using uhci_hcd and address 2
    usb 2-1: configuration #1 chosen from 1 choice
    usbcore: registered new interface driver cdc_acm
    drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters
    Initializing USB Mass Storage driver...
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    serio: i8042 KBD port at 0x60,0x64 irq 1
    mice: PS/2 mouse device common for all mice
    input: PC Speaker as /class/input/input2
    input: AT Translated Set 2 keyboard as /class/input/input3
    rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month
    i2c /dev entries driver
    ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 21
    w83627hf: Found W83627THF chip at 0x290
    w83627hf w83627hf.656: Reading VID from GPIO5
    iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
    iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0860)
    iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    iTCO_vendor_support: vendor-support=0
    device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
    EDAC MC: Ver: 2.1.0 Jan 26 2008
    EDAC i82875p: i82875p init one
    EDAC MC0: Giving out device to 'i82875p_edac' 'i82875p': DEV 0000:00:00.0
    EDAC PCI0: Giving out device to module 'i82875p_edac' controller 'EDAC PCI controller': DEV '0000:00:00.0' (POLLED)
    cpuidle: using governor ladder
    cpuidle: using governor menu
    input: HID 1241:1166 as /class/input/input4
    input: USB HID v1.10 Mouse [HID 1241:1166] on usb-0000:00:1d.0-1
    usbcore: registered new interface driver usbhid
    drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
    Advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Nov 20 19:16:42 2007 UTC).
    ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 21
    PCI: Setting latency timer of device 0000:00:1f.5 to 64
    intel8x0_measure_ac97_clock: measured 58037 usecs
    intel8x0: clocking to 48000
    ALSA device list:
    #0: Intel ICH5 with AD1985 at irq 21
    Netfilter messages via NETLINK v0.30.
    nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
    IPv4 over IPv4 tunneling driver
    GRE over IPv4 tunneling driver
    ip_tables: (C) 2000-2006 Netfilter Core Team
    arp_tables: (C) 2002 David S. Miller
    TCP cubic registered
    Initializing XFRM netlink socket
    NET: Registered protocol family 1
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    tunl0: Disabled Privacy Extensions
    ip6_tables: (C) 2000-2006 Netfilter Core Team
    IPv6 over IPv4 tunneling driver
    sit0: Disabled Privacy Extensions
    NET: Registered protocol family 17
    Bridge firewalling registered
    Ebtables v2.0 registered
    Starting balanced_irq
    Using IPI Shortcut mode
    rtc_cmos 00:02: setting system clock to 2008-01-27 22:28:46 UTC (1201472926)
    UDF-fs: No VRS found
    XFS mounting filesystem sda3
    Ending clean XFS mount for filesystem: sda3
    VFS: Mounted root (xfs filesystem) readonly.
    Freeing unused kernel memory: 540k freed
    Write protecting the kernel text: 3836k
    Write protecting the kernel read-only data: 1091k
    khelper used greatest stack depth: 6128 bytes left
    stty used greatest stack depth: 6068 bytes left
    mount used greatest stack depth: 5956 bytes left
    modprobe used greatest stack depth: 5924 bytes left
    modprobe used greatest stack depth: 5908 bytes left
    alsactl used greatest stack depth: 5884 bytes left
    Adding 2048276k swap on /dev/sda2. Priority:-1 extents:1 across:2048276k
    logsave used greatest stack depth: 5664 bytes left
    XFS mounting filesystem sda1
    Ending clean XFS mount for filesystem: sda1
    XFS mounting filesystem sda4
    Ending clean XFS mount for filesystem: sda4
    skge eth0: enabling interface
    ADDRCONF(NETDEV_UP): eth0: link is not ready
    wpa_supplicant used greatest stack depth: 5584 bytes left
    dhclient3 used greatest stack depth: 5448 bytes left
    eth1: no IPv6 routers present
    \
     
     \ /
      Last update: 2008-01-28 17:29    [W:0.107 / U:30.000 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site