lkml.org 
[lkml]   [2008]   [Jan]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Problem with ata layer in 2.6.24
On Monday 28 January 2008, Peter Zijlstra wrote:
>On Mon, 2008-01-28 at 09:17 +0100, Mikael Pettersson wrote:
>> 1. Wrong mailing list; use linux-ide (@vger) instead.
>
>What, and keep all us other interested people in the dark?

As a test, I tried rebooting to the latest fedora kernel and found it kills X,
so I'm back to the second to last fedora version ATM, and the
third 'smartctl -t lng /dev/sda' in 24 hours is running now. The first two
completed with no errors.

I've added the linux-ide list to refresh those people of the problem,
the logs are being spammed by this message stanza:

Jan 28 04:46:25 coyote kernel: [26550.290016] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
Jan 28 04:46:25 coyote kernel: [26550.290028] ata1.00: cmd 35/00:58:c9:9c:0a/00:01:00:00:00/e0 tag 0 dma 176128 out
Jan 28 04:46:25 coyote kernel: [26550.290029] res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 28 04:46:25 coyote kernel: [26550.290032] ata1.00: status: { DRDY }
Jan 28 04:46:25 coyote kernel: [26550.290060] ata1: soft resetting link
Jan 28 04:46:25 coyote kernel: [26550.452301] ata1.00: configured for UDMA/100
Jan 28 04:46:25 coyote kernel: [26550.452318] ata1: EH complete
Jan 28 04:46:25 coyote kernel: [26550.455898] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
Jan 28 04:46:25 coyote kernel: [26550.456151] sd 0:0:0:0: [sda] Write Protect is off
Jan 28 04:46:25 coyote kernel: [26550.456403] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA

And it just did it again, using the fedora kernel but without logging
anything at all when it froze. In other words I had to reboot between
the word list and the word to above. So now I'm booted to 2.6.24-rc7.

Before it crashes again, here is the dmesg:
[ 0.000000] Linux version 2.6.24-rc7 (root@coyote.coyote.den) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP
Mon Jan 14 10:00:40 EST 2008
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 262128) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 262128
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 262128
[ 0.000000] On node 0 totalpages: 262128
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 255 pages used for memmap
[ 0.000000] HighMem zone: 32497 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.2 present.
[ 0.000000] ACPI: RSDP 000F7220, 0014 (r0 Nvidia)
[ 0.000000] ACPI: RSDT 3FFF3000, 002C (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 3FFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 3FFF30C0, 4CC4 (r1 NVIDIA AWRDACPI 1000 MSFT 100000E)
[ 0.000000] ACPI: FACS 3FFF0000, 0040
[ 0.000000] ACPI: APIC 3FFF7DC0, 006E (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:10 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260081
[ 0.000000] Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] CPU 0 irqstacks, hard=c073a000 soft=c071a000
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2079.551 MHz processor.
[ 28.725256] Console: colour VGA+ 80x25
[ 28.725259] console [tty0] enabled
[ 28.725828] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 28.726361] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 28.756701] Memory: 1031116k/1048512k available (1938k kernel code, 16656k reserved, 967k data, 236k init, 131008k
highmem)
[ 28.756710] virtual kernel memory layout:
[ 28.756711] fixmap : 0xffc55000 - 0xfffff000 (3752 kB)
[ 28.756713] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 28.756714] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 28.756715] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 28.756716] .init : 0xc06dc000 - 0xc0717000 ( 236 kB)
[ 28.756718] .data : 0xc05e4944 - 0xc06d66e4 ( 967 kB)
[ 28.756719] .text : 0xc0400000 - 0xc05e4944 (1938 kB)
[ 28.756722] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 28.756770] SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 28.816731] Calibrating delay using timer specific routine.. 4160.90 BogoMIPS (lpj=2080452)
[ 28.816763] Security Framework initialized
[ 28.816770] SELinux: Initializing.
[ 28.816784] SELinux: Starting in permissive mode
[ 28.816797] selinux_register_security: Registering secondary module capability
[ 28.816800] Capability LSM initialized as secondary
[ 28.816809] Mount-cache hash table entries: 512
[ 28.816976] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
00000000
[ 28.816985] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 28.816987] CPU: L2 Cache: 512K (64 bytes/line)
[ 28.816990] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000 00000000
[ 28.816996] Intel machine check architecture supported.
[ 28.816998] Intel machine check reporting enabled on CPU#0.
[ 28.817003] Compat vDSO mapped to ffffe000.
[ 28.817017] Checking 'hlt' instruction... OK.
[ 28.820895] SMP alternatives: switching to UP code
[ 28.821401] Freeing SMP alternatives: 12k freed
[ 28.821404] ACPI: Core revision 20070126
[ 28.824590] CPU0: AMD Athlon(tm) XP 2800+ stepping 00
[ 28.824614] Total of 1 processors activated (4160.90 BogoMIPS).
[ 28.824820] ENABLING IO-APIC IRQs
[ 28.825012] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 28.936680] Brought up 1 CPUs
[ 28.936708] CPU0 attaching sched-domain:
[ 28.936711] domain 0: span 00000001
[ 28.936713] groups: 00000001
[ 28.936925] net_namespace: 64 bytes
[ 28.937409] Time: 12:43:09 Date: 01/28/08
[ 28.937442] NET: Registered protocol family 16
[ 28.937683] ACPI: bus type pci registered
[ 28.972986] PCI: PCI BIOS revision 2.10 entry at 0xfb4c0, last bus=2
[ 28.972989] PCI: Using configuration type 1
[ 28.972991] Setting up standard PCI resources
[ 28.980763] ACPI: EC: Look up EC in DSDT
[ 28.986590] ACPI: Interpreter enabled
[ 28.986593] ACPI: (supports S0 S1 S4 S5)
[ 28.986608] ACPI: Using IOAPIC for interrupt routing
[ 28.997079] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 28.997157] PCI: nForce2 C1 Halt Disconnect fixup
[ 28.998175] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 28.998355] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 28.998631] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[ 29.054757] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 29.054952] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 29.055144] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 29.055334] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 29.055529] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 29.055724] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 29.055918] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 11 *12 14 15)
[ 29.056109] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 11 *12 14 15)
[ 29.056298] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 29.056489] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 11 *12 14 15)
[ 29.056685] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 29.056876] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 29.057066] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 29.057258] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 29.057448] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 29.057642] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 29.057803] ACPI: PCI Interrupt Link [APC1] (IRQs *16)
[ 29.057951] ACPI: PCI Interrupt Link [APC2] (IRQs *17)
[ 29.058099] ACPI: PCI Interrupt Link [APC3] (IRQs *18)
[ 29.058246] ACPI: PCI Interrupt Link [APC4] (IRQs *19)
[ 29.058402] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[ 29.058617] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0
[ 29.058827] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0
[ 29.059036] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0
[ 29.059245] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
[ 29.059454] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0
[ 29.059669] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
[ 29.059819] ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
[ 29.060028] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
[ 29.060236] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
[ 29.060446] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
[ 29.060661] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
[ 29.060822] ACPI: Power Resource [ISAV] (on)
[ 29.060880] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 29.060917] pnp: PnP ACPI init
[ 29.060926] ACPI: bus type pnp registered
[ 29.066989] pnp: PnP ACPI: found 16 devices
[ 29.066992] ACPI: ACPI bus type pnp unregistered
[ 29.067179] usbcore: registered new interface driver usbfs
[ 29.067257] usbcore: registered new interface driver hub
[ 29.067309] usbcore: registered new device driver usb
[ 29.067395] PCI: Using ACPI for IRQ routing
[ 29.067399] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 29.117453] NetLabel: Initializing
[ 29.117455] NetLabel: domain hash size = 128
[ 29.117457] NetLabel: protocols = UNLABELED CIPSOv4
[ 29.117471] NetLabel: unlabeled traffic allowed by default
[ 29.118443] Time: tsc clocksource has been installed.
[ 29.120481] system 00:00: ioport range 0x4000-0x407f has been reserved
[ 29.120484] system 00:00: ioport range 0x4080-0x40ff has been reserved
[ 29.120487] system 00:00: ioport range 0x4400-0x447f has been reserved
[ 29.120490] system 00:00: ioport range 0x4480-0x44ff has been reserved
[ 29.120492] system 00:00: ioport range 0x4200-0x427f has been reserved
[ 29.120495] system 00:00: ioport range 0x4280-0x42ff has been reserved
[ 29.120502] system 00:01: ioport range 0x5000-0x503f has been reserved
[ 29.120505] system 00:01: ioport range 0x5100-0x513f has been reserved
[ 29.120511] system 00:02: iomem range 0xda800-0xdbfff has been reserved
[ 29.120514] system 00:02: iomem range 0xf0000-0xf7fff could not be reserved
[ 29.120516] system 00:02: iomem range 0xf8000-0xfbfff could not be reserved
[ 29.120519] system 00:02: iomem range 0xfc000-0xfffff could not be reserved
[ 29.120522] system 00:02: iomem range 0x3fff0000-0x3fffffff could not be reserved
[ 29.120525] system 00:02: iomem range 0xffff0000-0xffffffff could not be reserved
[ 29.120528] system 00:02: iomem range 0x0-0x9ffff could not be reserved
[ 29.120531] system 00:02: iomem range 0x100000-0x3ffeffff could not be reserved
[ 29.120534] system 00:02: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 29.120537] system 00:02: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 29.120543] system 00:04: ioport range 0xb78-0xb7b has been reserved
[ 29.120546] system 00:04: ioport range 0xf78-0xf7b has been reserved
[ 29.120548] system 00:04: ioport range 0xa78-0xa7b has been reserved
[ 29.120551] system 00:04: ioport range 0xe78-0xe7b has been reserved
[ 29.120554] system 00:04: ioport range 0xbbc-0xbbf has been reserved
[ 29.120556] system 00:04: ioport range 0xfbc-0xfbf has been reserved
[ 29.120559] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
[ 29.120562] system 00:04: ioport range 0x294-0x297 has been reserved
[ 29.151040] PCI: Bridge: 0000:00:08.0
[ 29.151044] IO window: 9000-afff
[ 29.151049] MEM window: e3000000-e6ffffff
[ 29.151053] PREFETCH window: 50000000-500fffff
[ 29.151058] PCI: Bridge: 0000:00:1e.0
[ 29.151059] IO window: disabled.
[ 29.151063] MEM window: e0000000-e2ffffff
[ 29.151066] PREFETCH window: d0000000-dfffffff
[ 29.151077] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 29.151093] NET: Registered protocol family 2
[ 29.160585] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 29.160952] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 29.162429] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 29.163092] TCP: Hash tables configured (established 131072 bind 65536)
[ 29.163095] TCP reno registered
[ 29.165574] checking if image is initramfs... it is
[ 29.446295] Freeing initrd memory: 3628k freed
[ 29.446709] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 29.446712] apm: overridden by ACPI.
[ 29.447133] audit: initializing netlink socket (disabled)
[ 29.447149] audit(1201524188.569:1): initialized
[ 29.447287] highmem bounce pool size: 64 pages
[ 29.447291] Total HugeTLB memory allocated, 0
[ 29.449941] SELinux: Registering netfilter hooks
[ 29.450082] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 29.450086] io scheduler noop registered
[ 29.450088] io scheduler anticipatory registered
[ 29.450090] io scheduler deadline registered
[ 29.450101] io scheduler cfq registered (default)
[ 29.472109] Boot video device is 0000:02:00.0
[ 29.477398] ACPI: Thermal Zone [THRM] (51 C)
[ 29.477413] isapnp: Scanning for PnP cards...
[ 29.650914] Switched to high resolution mode on CPU 0
[ 29.834322] isapnp: No Plug & Play device found
[ 29.837157] Real Time Clock Driver v1.12ac
[ 29.837309] Non-volatile memory driver v1.2
[ 29.837312] Linux agpgart interface v0.102
[ 29.837365] agpgart: Detected NVIDIA nForce2 chipset
[ 29.853228] agpgart: AGP aperture is 256M @ 0xc0000000
[ 29.853255] Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
[ 29.853403] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 29.853542] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 29.853854] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 29.854037] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 29.855000] RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
[ 29.855188] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 29.855191] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 29.855565] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 29.855638] mice: PS/2 mouse device common for all mice
[ 29.876081] input: AT Translated Set 2 keyboard as /class/input/input0
[ 29.878901] cpuidle: using governor ladder
[ 29.878904] cpuidle: using governor menu
[ 29.878982] usbcore: registered new interface driver hiddev
[ 29.879024] usbcore: registered new interface driver usbhid
[ 29.879027] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 29.879098] TCP cubic registered
[ 29.879100] Initializing XFRM netlink socket
[ 29.879180] NET: Registered protocol family 1
[ 29.879196] NET: Registered protocol family 17
[ 29.879204] Using IPI No-Shortcut mode
[ 29.879217] registered taskstats version 1
[ 29.879349] Magic number: 8:30:735
[ 29.879657] Freeing unused kernel memory: 236k freed
[ 29.879695] Write protecting the kernel text: 1940k
[ 29.879708] Write protecting the kernel read-only data: 758k
[ 30.175117] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[ 30.175126] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 22 (level, high) -> IRQ 16
[ 30.175139] PCI: Setting latency timer of device 0000:00:02.2 to 64
[ 30.175143] ehci_hcd 0000:00:02.2: EHCI Host Controller
[ 30.175235] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
[ 30.175275] ehci_hcd 0000:00:02.2: debug port 1
[ 30.175280] PCI: cache line size of 64 is not supported by device 0000:00:02.2
[ 30.175291] ehci_hcd 0000:00:02.2: irq 16, io mem 0xe7005000
[ 30.180677] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 30.180795] usb usb1: configuration #1 chosen from 1 choice
[ 30.180823] hub 1-0:1.0: USB hub found
[ 30.180834] hub 1-0:1.0: 6 ports detected
[ 30.287626] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 30.288031] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
[ 30.288038] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, high) -> IRQ 17
[ 30.288052] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 30.288055] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 30.288129] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 30.288148] ohci_hcd 0000:00:02.0: irq 17, io mem 0xe7003000
[ 30.340664] usb usb2: configuration #1 chosen from 1 choice
[ 30.340691] hub 2-0:1.0: USB hub found
[ 30.340704] hub 2-0:1.0: 3 ports detected
[ 30.441860] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20
[ 30.441865] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 20 (level, high) -> IRQ 18
[ 30.441873] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 30.441876] ohci_hcd 0000:00:02.1: OHCI Host Controller
[ 30.441932] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
[ 30.441945] ohci_hcd 0000:00:02.1: irq 18, io mem 0xe7004000
[ 30.487468] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 30.494540] usb usb3: configuration #1 chosen from 1 choice
[ 30.494569] hub 3-0:1.0: USB hub found
[ 30.494579] hub 3-0:1.0: 3 ports detected
[ 30.601427] USB Universal Host Controller Interface driver v3.0
[ 30.601865] usb 1-1: configuration #1 chosen from 1 choice
[ 30.602052] hub 1-1:1.0: USB hub found
[ 30.602151] hub 1-1:1.0: 4 ports detected
[ 30.660576] SCSI subsystem initialized
[ 30.673851] Driver 'sd' needs updating - please use bus_type methods
[ 30.700319] libata version 3.00 loaded.
[ 30.702887] pata_amd 0000:00:09.0: version 0.3.10
[ 30.703052] PCI: Setting latency timer of device 0000:00:09.0 to 64
[ 30.703188] scsi0 : pata_amd
[ 30.709313] scsi1 : pata_amd
[ 30.710076] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 30.710079] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 30.864753] ata1.00: ATA-6: WDC WD2000JB-00EVA0, 15.05R15, max UDMA/100
[ 30.864756] ata1.00: 390721968 sectors, multi 16: LBA48
[ 30.871629] ata1.00: configured for UDMA/100
[ 31.195305] ata2.00: ATAPI: LITE-ON DVDRW SHM-165H6S, HS06, max UDMA/66
[ 31.243813] ata2.01: ATA-7: MAXTOR STM3320620A, 3.AAE, max UDMA/100
[ 31.243816] ata2.01: 625142448 sectors, multi 16: LBA48
[ 31.243825] ata2.00: limited to UDMA/33 due to 40-wire cable
[ 31.417074] ata2.00: configured for UDMA/33
[ 31.451769] ata2.01: configured for UDMA/100
[ 31.451873] scsi 0:0:0:0: Direct-Access ATA WDC WD2000JB-00E 15.0 PQ: 0 ANSI: 5
[ 31.451953] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
[ 31.451967] sd 0:0:0:0: [sda] Write Protect is off
[ 31.451970] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 31.451989] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 31.452040] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
[ 31.452051] sd 0:0:0:0: [sda] Write Protect is off
[ 31.452054] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 31.452071] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 31.452075] sda: sda1 sda2
[ 31.467219] sd 0:0:0:0: [sda] Attached SCSI disk
[ 31.468093] scsi 1:0:0:0: CD-ROM LITE-ON DVDRW SHM-165H6S HS06 PQ: 0 ANSI: 5
[ 31.468208] scsi 1:0:1:0: Direct-Access ATA MAXTOR STM332062 3.AA PQ: 0 ANSI: 5
[ 31.468272] sd 1:0:1:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
[ 31.468283] sd 1:0:1:0: [sdb] Write Protect is off
[ 31.468286] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 31.468303] sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 31.468338] sd 1:0:1:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
[ 31.468349] sd 1:0:1:0: [sdb] Write Protect is off
[ 31.468352] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 31.468370] sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 31.468373] sdb:<6>usb 2-2: new full speed USB device using ohci_hcd and address 2
[ 31.499690] sdb1 sdb2 sdb3
[ 31.500119] sd 1:0:1:0: [sdb] Attached SCSI disk
[ 31.637428] usb 2-2: configuration #1 chosen from 1 choice
[ 31.856522] usb 2-3: new low speed USB device using ohci_hcd and address 3
[ 32.020045] usb 2-3: configuration #1 chosen from 1 choice
[ 32.035222] input: Chicony Saitek Eclipse II Keyboard as /class/input/input1
[ 32.038424] input,hidraw0: USB HID v1.11 Keyboard [Chicony Saitek Eclipse II Keyboard] on usb-0000:00:02.0-3
[ 32.067995] input: Chicony Saitek Eclipse II Keyboard as /class/input/input2
[ 32.070422] input,hiddev96,hidraw1: USB HID v1.11 Device [Chicony Saitek Eclipse II Keyboard] on usb-0000:00:02.0-3
[ 32.287225] usb 3-3: new full speed USB device using ohci_hcd and address 2
[ 32.422699] usb 3-3: configuration #1 chosen from 1 choice
[ 32.425658] hub 3-3:1.0: USB hub found
[ 32.428631] hub 3-3:1.0: 4 ports detected
[ 32.724000] usb 1-1.1: new low speed USB device using ehci_hcd and address 6
[ 32.919001] usb 1-1.1: configuration #1 chosen from 1 choice
[ 33.655893] hiddev97hidraw2: USB HID v1.11 Device [Belkin Belkin UPS] on usb-0000:00:02.2-1.1
[ 33.833315] usb 1-1.2: new full speed USB device using ehci_hcd and address 7
[ 33.925926] usb 1-1.2: configuration #1 chosen from 1 choice
[ 34.018028] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
[ 34.043070] sata_sil 0000:01:0a.0: version 2.3
[ 34.043348] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[ 34.043355] ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 19
[ 34.045029] scsi2 : sata_sil
[ 34.050031] scsi3 : sata_sil
[ 34.050064] ata3: SATA max UDMA/100 mmio m512@0xe6004000 tf 0xe6004080 irq 19
[ 34.050068] ata4: SATA max UDMA/100 mmio m512@0xe6004000 tf 0xe60040c0 irq 19
[ 34.107056] usb 1-1.4: new high speed USB device using ehci_hcd and address 8
[ 34.192310] usb 1-1.4: configuration #1 chosen from 1 choice
[ 34.192499] hub 1-1.4:1.0: USB hub found
[ 34.192597] hub 1-1.4:1.0: 4 ports detected
[ 34.352811] ata3: SATA link down (SStatus 0 SControl 310)
[ 34.481823] usb 1-1.4.3: new low speed USB device using ehci_hcd and address 9
[ 34.573676] usb 1-1.4.3: configuration #1 chosen from 1 choice
[ 34.577917] input: Logitech USB Receiver as /class/input/input3
[ 34.580691] input,hidraw3: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.2-1.4.3
[ 34.757557] usb 1-1.4.4: new full speed USB device using ehci_hcd and address 10
[ 34.806514] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 34.810071] ata4.00: ATA-7: Hitachi HDT725040VLA360, V5COA7EA, max UDMA/133
[ 34.810074] ata4.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 34.816059] ata4.00: configured for UDMA/100
[ 34.816175] scsi 3:0:0:0: Direct-Access ATA Hitachi HDT72504 V5CO PQ: 0 ANSI: 5
[ 34.816257] sd 3:0:0:0: [sdc] 781422768 512-byte hardware sectors (400088 MB)
[ 34.816271] sd 3:0:0:0: [sdc] Write Protect is off
[ 34.816274] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 34.816293] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 34.816344] sd 3:0:0:0: [sdc] 781422768 512-byte hardware sectors (400088 MB)
[ 34.816355] sd 3:0:0:0: [sdc] Write Protect is off
[ 34.816358] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 34.816375] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 34.816379] sdc: sdc1
[ 34.829837] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 34.843933] usb 1-1.4.4: configuration #1 chosen from 1 choice
[ 37.852458] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 37.852464] EXT3-fs: write access will be enabled during recovery.
[ 41.522866] kjournald starting. Commit interval 5 seconds
[ 41.522885] EXT3-fs: recovery complete.
[ 41.524254] EXT3-fs: mounted filesystem with ordered data mode.
[ 41.972449] audit(1201524201.103:2): enforcing=1 old_enforcing=0 auid=4294967295
[ 42.187011] SELinux:8192 avtab hash slots allocated.Num of rules:213166
[ 42.260611] SELinux:8192 avtab hash slots allocated.Num of rules:213166
[ 42.314117] security: 8 users, 11 roles, 2363 types, 114 bools, 1 sens, 1024 cats
[ 42.314122] security: 67 classes, 213166 rules
[ 42.327287] SELinux: Completing initialization.
[ 42.327290] SELinux: Setting up existing superblocks.
[ 42.353550] SELinux: initialized (dev dm-0, type ext3), uses xattr
[ 42.515071] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
[ 42.515088] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 42.515193] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[ 42.515205] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[ 42.515235] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[ 42.515244] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
[ 42.515250] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[ 42.515262] SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
[ 42.515266] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 42.515274] SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
[ 42.515280] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
[ 42.515285] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[ 42.515290] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[ 42.515299] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 42.515312] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
[ 42.515318] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[ 42.515341] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 42.520002] SELinux: policy loaded with handle_unknown=allow
[ 42.520011] audit(1201524201.651:3): policy loaded auid=4294967295
[ 46.528101] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 46.528126] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 46.528149] sd 1:0:1:0: Attached scsi generic sg2 type 0
[ 46.528174] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 46.931288] input: Power Button (FF) as /class/input/input4
[ 46.938141] ACPI: Power Button (FF) [PWRF]
[ 46.938186] ACPI Error (evxfevnt-0186): Could not enable SleepButton event [20070126]
[ 46.938192] ACPI Warning (evxface-0145): Could not enable fixed event 3 [20070126]
[ 46.938283] input: Power Button (CM) as /class/input/input5
[ 46.941132] ACPI: Power Button (CM) [PWRB]
[ 46.941190] input: Sleep Button (CM) as /class/input/input6
[ 46.944347] ACPI: Sleep Button (CM) [SLPB]
[ 47.285717] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
[ 47.285742] usbcore: registered new interface driver usblp
[ 47.308848] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000
[ 47.308876] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x5100
[ 47.352146] usbcore: registered new interface driver usbserial
[ 47.352152] drivers/usb/serial/usb-serial.c: USB Serial Driver core
[ 47.455275] drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI USB Serial Device
[ 47.455308] ftdi_sio 1-1.2:1.0: FTDI USB Serial Device converter detected
[ 47.455342] drivers/usb/serial/ftdi_sio.c: Detected FT232RL
[ 47.455381] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0
[ 47.455398] usbcore: registered new interface driver ftdi_sio
[ 47.455401] drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters Driver
[ 47.530751] input: PC Speaker as /class/input/input7
[ 47.572764] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[ 47.573147] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
[ 47.573151] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCH] -> GSI 22 (level, high) -> IRQ 16
[ 47.573158] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 47.615492] Floppy drive(s): fd0 is 1.44M
[ 47.630509] FDC 0 is a post-1991 82077
[ 48.084769] forcedeth 0000:00:04.0: ifname eth0, PHY OUI 0x20 @ 1, addr 00:04:4b:5d:eb:7d
[ 48.084775] forcedeth 0000:00:04.0: timirq lnktim desc-v1
[ 48.085214] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 48.085222] ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 20
[ 48.141308] firewire_ohci: Added fw-ohci device 0000:01:09.0, OHCI version 1.10
[ 48.285456] nvidia: module license 'NVIDIA' taints kernel.
[ 48.549725] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 20
[ 48.550149] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.07 Thu Dec 13 18:42:56 PST 2007
[ 48.641028] firewire_core: created new fw device fw0 (0 config rom retries, S400)
[ 48.848094] Linux video capture interface: v2.00
[ 49.104974] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
[ 49.105072] cx88[0]: subsystem: 7063:3000, board: pcHDTV HD3000 HDTV [card=22,autodetected]
[ 49.105076] cx88[0]: TV tuner type 60, Radio tuner type -1
[ 49.151205] cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
[ 49.255507] cx88[0]/2: cx2388x 8802 Driver Manager
[ 49.257461] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 49.257472] ACPI: PCI Interrupt 0000:01:07.2[A] -> Link [APC2] -> GSI 17 (level, high) -> IRQ 21
[ 49.257484] cx88[0]/2: found at 0000:01:07.2, rev: 5, irq: 21, latency: 32, mmio: 0xe4000000
[ 49.257561] ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC2] -> GSI 17 (level, high) -> IRQ 21
[ 49.257573] cx88[0]/0: found at 0000:01:07.0, rev: 5, irq: 21, latency: 32, mmio: 0xe3000000
[ 49.440179] tda8290_probe: not probed - driver disabled by Kconfig
[ 49.440185] tuner 2-0043: chip found @ 0x86 (cx88[0])
[ 49.440208] tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner)
[ 49.440211] tuner 2-0043: type set to tda9887
[ 49.442442] tuner 2-0061: chip found @ 0xc2 (cx88[0])
[ 49.442458] tuner-simple 2-0061: type set to 60 (Thomson DTT 761X (ATSC/NTSC))
[ 49.442461] tuner 2-0061: type set to Thomson DTT 761X (A
[ 49.442464] tuner-simple 2-0061: type set to 60 (Thomson DTT 761X (ATSC/NTSC))
[ 49.442466] tuner 2-0061: type set to Thomson DTT 761X (A
[ 49.451016] cx88[0]/0: registered device video0 [v4l2]
[ 49.451038] cx88[0]/0: registered device vbi0
[ 49.451064] cx88[0]/0: registered device radio0
[ 49.454722] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 49.454731] ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC3] -> GSI 18 (level, high) -> IRQ 22
[ 49.459555] Audigy2 value: Special config.
[ 49.532042] cx88/2: cx2388x dvb driver version 0.0.6 loaded
[ 49.532047] cx88/2: registering cx8802 driver, type: dvb access: shared
[ 49.532052] cx88[0]/2: subsystem: 7063:3000, board: pcHDTV HD3000 HDTV [card=22]
[ 49.532055] cx88[0]/2: cx2388x based DVB/ATSC card
[ 49.548119] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21
[ 49.548125] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 21 (level, high) -> IRQ 17
[ 49.548162] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 49.654575] DVB: registering new adapter (cx88[0])
[ 49.654582] DVB: registering frontend 0 (Oren OR51132 VSB/QAM Frontend)...
[ 49.859126] intel8x0_measure_ac97_clock: measured 50668 usecs
[ 49.859131] intel8x0: clocking to 47378
[ 52.910654] EXT3 FS on dm-0, internal journal
[ 53.162621] kjournald starting. Commit interval 5 seconds
[ 53.170013] EXT3 FS on sda1, internal journal
[ 53.170019] EXT3-fs: mounted filesystem with ordered data mode.
[ 53.170144] SELinux: initialized (dev sda1, type ext3), uses xattr
[ 53.170540] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 53.174936] kjournald starting. Commit interval 5 seconds
[ 53.182987] EXT3 FS on sdc1, internal journal
[ 53.182992] EXT3-fs: mounted filesystem with ordered data mode.
[ 53.188827] SELinux: initialized (dev sdc1, type ext3), uses xattr
[ 54.005729] Adding 2031608k swap on /dev/mapper/VolGroup00-LogVol01. Priority:-1 extents:1 across:2031608k
[ 54.009417] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts


--
Cheers, Gene
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
...[Linux's] capacity to talk via any medium except smoke signals.
-- Dr. Greg Wettstein, Roger Maris Cancer Center


\
 
 \ /
  Last update: 2008-01-28 13:59    [from the cache]
©2003-2014 Jasper Spaans. Advertise on this site