lkml.org 
[lkml]   [2008]   [Jan]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [patch 3/3] PCI: use dev_printk in x86 quirk messages
Date
On Monday 17 December 2007 02:09:40 pm bjorn.helgaas@hp.com wrote:
> Convert quirk printks to dev_printk().
>
> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
>
> ---
> arch/x86/kernel/quirks.c | 42 ++++++++++++++++++++++--------------------
> arch/x86/pci/fixup.c | 22 +++++++++++-----------
> 2 files changed, 33 insertions(+), 31 deletions(-)

After all the discussion about whether this should go via
the PCI tree or via Ingo, I think it got dropped :-)

Here it is again, refreshed to apply to current -mm.



Convert quirk printks to dev_printk().

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>

---
arch/x86/kernel/quirks.c | 42 ++++++++++++++++++++++--------------------
arch/x86/pci/fixup.c | 22 +++++++++++-----------
2 files changed, 33 insertions(+), 31 deletions(-)

Index: linux-mm/arch/x86/kernel/quirks.c
===================================================================
--- linux-mm.orig/arch/x86/kernel/quirks.c 2008-01-18 11:16:13.000000000 -0700
+++ linux-mm/arch/x86/kernel/quirks.c 2008-01-22 10:27:37.000000000 -0700
@@ -30,8 +30,8 @@
raw_pci_ops->read(0, 0, 0x40, 0x4c, 2, &word);

if (!(word & (1 << 13))) {
- printk(KERN_INFO "Intel E7520/7320/7525 detected. "
- "Disabling irq balancing and affinity\n");
+ dev_info(&dev->dev, "Intel E7520/7320/7525 detected; "
+ "disabling irq balancing and affinity\n");
#ifdef CONFIG_IRQBALANCE
irqbalance_disable("");
#endif
@@ -104,14 +104,16 @@
pci_read_config_dword(dev, 0xF0, &rcba);
rcba &= 0xFFFFC000;
if (rcba == 0) {
- printk(KERN_DEBUG "RCBA disabled. Cannot force enable HPET\n");
+ dev_printk(KERN_DEBUG, &dev->dev, "RCBA disabled; "
+ "cannot force enable HPET\n");
return;
}

/* use bits 31:14, 16 kB aligned */
rcba_base = ioremap_nocache(rcba, 0x4000);
if (rcba_base == NULL) {
- printk(KERN_DEBUG "ioremap failed. Cannot force enable HPET\n");
+ dev_printk(KERN_DEBUG, &dev->dev, "ioremap failed; "
+ "cannot force enable HPET\n");
return;
}

@@ -122,8 +124,8 @@
/* HPET is enabled in HPTC. Just not reported by BIOS */
val = val & 0x3;
force_hpet_address = 0xFED00000 | (val << 12);
- printk(KERN_DEBUG "Force enabled HPET at base address 0x%lx\n",
- force_hpet_address);
+ dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
+ "0x%lx\n", force_hpet_address);
iounmap(rcba_base);
return;
}
@@ -142,11 +144,12 @@
if (err) {
force_hpet_address = 0;
iounmap(rcba_base);
- printk(KERN_DEBUG "Failed to force enable HPET\n");
+ dev_printk(KERN_DEBUG, &dev->dev,
+ "Failed to force enable HPET\n");
} else {
force_hpet_resume_type = ICH_FORCE_HPET_RESUME;
- printk(KERN_DEBUG "Force enabled HPET at base address 0x%lx\n",
- force_hpet_address);
+ dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
+ "0x%lx\n", force_hpet_address);
}
}

@@ -206,8 +209,8 @@
if (val & 0x4) {
val &= 0x3;
force_hpet_address = 0xFED00000 | (val << 12);
- printk(KERN_DEBUG "HPET at base address 0x%lx\n",
- force_hpet_address);
+ dev_printk(KERN_DEBUG, &dev->dev, "HPET at 0x%lx\n",
+ force_hpet_address);
return;
}

@@ -227,14 +230,14 @@
/* HPET is enabled in HPTC. Just not reported by BIOS */
val &= 0x3;
force_hpet_address = 0xFED00000 | (val << 12);
- printk(KERN_DEBUG "Force enabled HPET at base address 0x%lx\n",
- force_hpet_address);
+ dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
+ "0x%lx\n", force_hpet_address);
cached_dev = dev;
force_hpet_resume_type = OLD_ICH_FORCE_HPET_RESUME;
return;
}

- printk(KERN_DEBUG "Failed to force enable HPET\n");
+ dev_printk(KERN_DEBUG, &dev->dev, "Failed to force enable HPET\n");
}

/*
@@ -292,8 +295,8 @@
*/
if (val & 0x80) {
force_hpet_address = (val & ~0x3ff);
- printk(KERN_DEBUG "HPET at base address 0x%lx\n",
- force_hpet_address);
+ dev_printk(KERN_DEBUG, &dev->dev, "HPET at 0x%lx\n",
+ force_hpet_address);
return;
}

@@ -307,14 +310,14 @@
pci_read_config_dword(dev, 0x68, &val);
if (val & 0x80) {
force_hpet_address = (val & ~0x3ff);
- printk(KERN_DEBUG "Force enabled HPET at base address 0x%lx\n",
- force_hpet_address);
+ dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
+ "0x%lx\n", force_hpet_address);
cached_dev = dev;
force_hpet_resume_type = VT8237_FORCE_HPET_RESUME;
return;
}

- printk(KERN_DEBUG "Failed to force enable HPET\n");
+ dev_printk(KERN_DEBUG, &dev->dev, "Failed to force enable HPET\n");
}

DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235,
@@ -342,7 +345,7 @@
pci_read_config_dword(dev, 0x44, &val);
force_hpet_address = val & 0xfffffffe;
force_hpet_resume_type = NVIDIA_FORCE_HPET_RESUME;
- printk(KERN_DEBUG "Force enabled HPET at base address 0x%lx\n",
+ dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at 0x%lx\n",
force_hpet_address);
cached_dev = dev;
return;
Index: linux-mm/arch/x86/pci/fixup.c
===================================================================
--- linux-mm.orig/arch/x86/pci/fixup.c 2008-01-18 11:17:15.000000000 -0700
+++ linux-mm/arch/x86/pci/fixup.c 2008-01-22 10:28:28.000000000 -0700
@@ -17,7 +17,7 @@
int pxb, reg;
u8 busno, suba, subb;

- printk(KERN_WARNING "PCI: Searching for i450NX host bridges on %s\n", pci_name(d));
+ dev_warn(&d->dev, "Searching for i450NX host bridges\n");
reg = 0xd0;
for(pxb = 0; pxb < 2; pxb++) {
pci_read_config_byte(d, reg++, &busno);
@@ -41,7 +41,7 @@
*/
u8 busno;
pci_read_config_byte(d, 0x4a, &busno);
- printk(KERN_INFO "PCI: i440KX/GX host bridge %s: secondary bus %02x\n", pci_name(d), busno);
+ dev_info(&d->dev, "i440KX/GX host bridge; secondary bus %02x\n", busno);
pci_scan_bus_with_sysdata(busno);
pcibios_last_bus = -1;
}
@@ -55,7 +55,7 @@
*/
int i;

- printk(KERN_WARNING "PCI: Fixing base address flags for device %s\n", pci_name(d));
+ dev_warn(&d->dev, "Fixing base address flags\n");
for(i = 0; i < 4; i++)
d->resource[i].flags |= PCI_BASE_ADDRESS_SPACE_IO;
}
@@ -68,7 +68,7 @@
* Fix class to be PCI_CLASS_STORAGE_SCSI
*/
if (!d->class) {
- printk(KERN_WARNING "PCI: fixing NCR 53C810 class code for %s\n", pci_name(d));
+ dev_warn(&d->dev, "Fixing NCR 53C810 class code\n");
d->class = PCI_CLASS_STORAGE_SCSI << 8;
}
}
@@ -80,7 +80,7 @@
* SiS 5597 and 5598 chipsets require latency timer set to
* at most 32 to avoid lockups.
*/
- DBG("PCI: Setting max latency to 32\n");
+ dev_dbg(&d->dev, "Setting max latency to 32\n");
pcibios_max_latency = 32;
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, pci_fixup_latency);
@@ -138,7 +138,7 @@

pci_read_config_byte(d, where, &v);
if (v & ~mask) {
- printk(KERN_WARNING "Disabling VIA memory write queue (PCI ID %04x, rev %02x): [%02x] %02x & %02x -> %02x\n", \
+ dev_warn(&d->dev, "Disabling VIA memory write queue (PCI ID %04x, rev %02x): [%02x] %02x & %02x -> %02x\n", \
d->device, d->revision, where, v, mask, v & mask);
v &= mask;
pci_write_config_byte(d, where, v);
@@ -200,7 +200,7 @@
* Apply fixup if needed, but don't touch disconnect state
*/
if ((val & 0x00FF0000) != 0x00010000) {
- printk(KERN_WARNING "PCI: nForce2 C1 Halt Disconnect fixup\n");
+ dev_warn(&dev->dev, "nForce2 C1 Halt Disconnect fixup\n");
pci_write_config_dword(dev, 0x6c, (val & 0xFF00FFFF) | 0x00010000);
}
}
@@ -348,7 +348,7 @@
pci_read_config_word(pdev, PCI_COMMAND, &config);
if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW;
- printk(KERN_DEBUG "Boot video device is %s\n", pci_name(pdev));
+ dev_printk(KERN_DEBUG, &pdev->dev, "Boot video device\n");
}
}
DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_video);
@@ -388,11 +388,11 @@
/* verify the change for status output */
pci_read_config_byte(dev, 0x50, &val);
if (val & 0x40)
- printk(KERN_INFO "PCI: Detected MSI K8T Neo2-FIR, "
+ dev_info(&dev->dev, "Detected MSI K8T Neo2-FIR; "
"can't enable onboard soundcard!\n");
else
- printk(KERN_INFO "PCI: Detected MSI K8T Neo2-FIR, "
- "enabled onboard soundcard.\n");
+ dev_info(&dev->dev, "Detected MSI K8T Neo2-FIR; "
+ "enabled onboard soundcard\n");
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237,

\
 
 \ /
  Last update: 2008-01-22 18:47    [W:0.082 / U:0.468 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site