lkml.org 
[lkml]   [2008]   [Jan]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: regression: 100% io-wait with 2.6.24-rcX
----- Original Message ----
> From: Mike Snitzer <snitzer@gmail.com>
> To: Linus Torvalds <torvalds@linux-foundation.org>
> Cc: Mel Gorman <mel@csn.ul.ie>; Martin Knoblauch <spamtrap@knobisoft.de>; Fengguang Wu <wfg@mail.ustc.edu.cn>; Peter Zijlstra <peterz@infradead.org>; jplatte@naasa.net; Ingo Molnar <mingo@elte.hu>; linux-kernel@vger.kernel.org; "linux-ext4@vger.kernel.org" <linux-ext4@vger.kernel.org>; James.Bottomley@steeleye.com
> Sent: Friday, January 18, 2008 11:47:02 PM
> Subject: Re: regression: 100% io-wait with 2.6.24-rcX
>
> > I can fire up 2.6.24-rc8 in short order to see if things are vastly
> > improved (as Martin seems to indicate that he is happy with
> > AACRAID on 2.6.24-rc8). Although even Martin's AACRAID
> > numbers from 2.6.19.2
>
> are still quite good (relative to mine). Martin can you share any tuning
> > you may have done to get AACRAID to where it is for you right now?
Mike,

I have always been happy with the AACRAID box compared to the CCISS system. Even with the "regression" in 2.6.24-rc1..rc5 it was more than acceptable to me. For me the differences between 2.6.19 and 2.6.24-rc8 on the AACRAID setup are:

- 11% (single stream) to 25% (dual/triple stream) regression in DIO. Something I do not care much about. I just measure it for reference.
+ the very nice behaviour when writing to different targets (mix3), which I attribute to Peter's per-dbi stuff.

And until -rc6 I was extremely pleased with the cool speedup I saw on my CCISS boxes. This would have been the next "production" kernel for me. But lets discuss this under a seperate topic. It has nothing to do with the original wait-io issue.

Oh, before I forget. There has been no tuning for the AACRAID. The system is an IBM x3650 with built in AACRAID and battery backed write cache. The disks are 6x142GB/15krpm in a RAID5 setup. I see one big difference between your an my tests. I do 1MB writes to simulate the behaviour of the real applications, while yours seem to be much smaller.

Cheers
Martin





\
 
 \ /
  Last update: 2008-01-19 11:27    [W:0.559 / U:0.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site