lkml.org 
[lkml]   [2008]   [Jan]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH 16/22 -v2] add get_monotonic_cycles
* Steven Rostedt (rostedt@goodmis.org) wrote:
>
...
> >
> > > >
> > > > - Disable preemption at the read-side :
> > > > it makes sure the pointer I get will point to a data structure that
> > > > will never change while I am in the preempt disabled code. (see *)
> > > > - I use per-cpu data to allow the read-side to be as fast as possible
> > > > (only need to disable preemption, does not race against other CPUs and
> > > > won't generate cache line bouncing). It also allows dealing with
> > > > unsynchronized TSCs if needed.
> > > > - Periodical write side : it's called from an IPI running on each CPU.
> > > >
> > > > (*) We expect the read-side (preempt off region) to last shorter than
> > > > the interval between IPI updates so we can guarantee the data structure
> > > > it uses won't be modified underneath it. Since the IPI update is
> > > > launched each seconds or so (depends on the frequency of the counter we
> > > > are trying to extend), it's more than ok.
> > >
> > > One thing I want to clear up. The major difference between this
> > > latency_tracer and LTTng is what we consider fast paths. The latency
> > > tracer is recording things like enabling and disabling interrupts, preempt
> > > count changes, or simply profiling all function calls. Those are what I
> > > consider fast paths. The slow path WRT the latency_tracer are things like
> > > context switches. This is why I don't have a problem with copying the
> > > comm at context switch time. Because that _is_ a slow path for the latency
> > > tracer.
> >
> > LTTng hooks in the lockdep tracer to trace irq on/off, spinlocks, etc..
> > in flight recorder mode, we have nothing to write to disk and therefore
> > we can handle very frequent events. We then do the analysis off-line
> > using the last MB written in the buffers. The advantage is that the
> > kernel dumbly writes data to a buffer : we therefore move the complexity
> > to user-space.
>
> But you would still need to do something in case you want this information
> dumped to console on a kernel crash. Of course you can rely on kexec, but
> if the kexec fails (which is possible) then you lose all the information.
> Having the ability to dump the output to console on a crash is one of the
> benefits of latency_tracer that I want to keep.
>

There has been some integration done between LTTng and the "crash" tool
to extract the buffers from a crashed kernel. I am not an expert in
crash buffer extraction though, but I guess all the available mechanisms
depend on kexec and could show the limits you are referring to.

If you really want to pretty-print the information to the console, I
would propose that you leave that part of the problem to a different
output module. The core of the latency tracer could keep the minimum
information. Then, when a dump is triggered, it either sends the
information to LTTng or to your console pretty-printer.

However, I would not call the pretty-printer a "tracer" module per-se.
We would have to accept that it is a bit more tied to the kernel
internals than the latency tracer. My goal is to separate the core
"profiling" module from the optional "pretty-printing" module as much as
possible so the latency tracer core could be reused by other output
modules.

>
> >
> > I agree that some kind of tracing, like the one you are doing, might be
> > done more efficiently if you do a first clever analysis phase directly
> > in the kernel without writing the raw high event rate data in memory
> > buffers. However, I believe that it would be more powerful if we combine
> > the two approaches rather than trying to do everything in or out of the
> > kernel. LTTng could provide the comm names, priorities, etc, and your
> > tracer could provide the top X list of processes that had a bad
> > behavior. It would mean that the complete overall information would be
> > made available after a post-processing phase done in an analysis tool
> > like LTTV, but I don't see any problem with it.
>
> Of course you don't see any problem with it, because you know LTTV and
> LTTng very well ;-)
>
> latency_tracer has been very detrimental in solving -rt patch latencies by
> telling the customer to run with latency trace on, and then having them
> simply set a few sysctl variables and run their app. By combining this
> with LTTng, I wouldn't know how to start with telling a customer how to
> analyze the problem.
>
> Simply put, latency_tracer has a much smaller learning curve than LTTng.
> Not to mention, a smaller footprint. The tracer here is very focused on
> what to do, and is not meant to be a general profiling tool as LTTng is.
>
> In-other-words, latency_tracer is LTTng-lite ;-)
>

If LTTng is already ported to your specific kernel, the learning-curve
is not big at all. Here is what the latency_tracer over LTTng guide
could look like :

Well, once you have LTTng in your kernel and have compiled and installed
the ltt-control and lttv packages (configure, make, make install), all
that would be needed is :

(there may be some bits in the QUICKSTART GUIDE on
http://ltt.polymtl.ca, like adding the debugfs mount to fstab and make sure
the LTTng modules are loaded)

#arm all the markers
ltt-armall
#start lttng tracing
lttctl -n test -t /tmp/trace1 -d -l /mnt/debugfs/ltt

-> start latency tracer
-> stop latency tracer
-> trigger latency tracer dump

While the tracing is active, trigger the condition...

(rince, repeat, can handle multiple latency tracer dumps)

#stop lttng tracing
lttctl -n test -R
#disarm all markers
ltt-disarmall

You can easily test the trace with :
lttv -m textDump -t /tmp/trace1

Your users would issue something like :

lttv -m latencytracerDump -t /tmp/trace1

that's it. LatencytracerDump would be a new specialized plugin, inspired
from the generic textDump.c plugin and from the state.c module (for
hooking on specific events rather that on _all_ events). It would
generate a text output from the trace collected at each latency tracer
dump.

Mathieu


--
Mathieu Desnoyers
Computer Engineering Ph.D. Student, Ecole Polytechnique de Montreal
OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F BA06 3F25 A8FE 3BAE 9A68


\
 
 \ /
  Last update: 2008-01-16 21:25    [W:0.097 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site