lkml.org 
[lkml]   [2008]   [Jan]   [15]   [last100]   RSS Feed
Views: [more markup]  [less markup]  [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH]PCIE ASPM support - takes 2
FromShaohua Li <>
DateTue, 15 Jan 2008 13:07:02 +0800
On Mon, 2008-01-14 at 21:19 -0700, Matthew Wilcox wrote:
> On Tue, Jan 15, 2008 at 11:21:16AM +0800, Shaohua Li wrote:
> > +	int same_clock = 0;
> > +
> > +	/* Check downstream component if bit Slot Clock Configuration is 1 */
> > +	child_pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP);
> > +	pci_read_config_word(child_dev, child_pos + PCI_EXP_LNKSTA, &reg16);
> > +	if (reg16 & PCI_EXP_LNKSTA_SLC)
> > +		same_clock = 1;
> > +
> > +	/* Check upstream component if bit Slot Clock Configuration is 1 */
> > +	pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
> > +	pci_read_config_word(pdev, pos + PCI_EXP_LNKSTA, &reg16);
> > +	if (reg16 & PCI_EXP_LNKSTA_SLC)
> > +		same_clock &= 1;
> > +	else
> > +		same_clock = 0;
> 
> This could be done a little neater ... the &= 1 idiom confused me on a
> quick scan.
> 
> How about:
> 
> 	int same_clock = 1;
> 
> 	child_pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP);
> 	pci_read_config_word(child_dev, child_pos + PCI_EXP_LNKSTA, &reg16);
> 	if (!(reg16 & PCI_EXP_LNKSTA_SLC))
> 		same_clock = 0;
> 
> 	pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
> 	pci_read_config_word(pdev, pos + PCI_EXP_LNKSTA, &reg16);
> 	if (!(reg16 & PCI_EXP_LNKSTA_SLC))
> 		same_clock = 0;
Thanks, for your time. ok, this is better.
> > +#ifdef CONFIG_PCIEASPM
> > +extern int pcie_aspm_init(void);
> > +#else
> > +#define pcie_aspm_init() do {} while (0)
> > +#endif
> 
> If pcie_aspm_init() returns a value, then callers may want to check it
> ... which they can't do for this null definition.  How about simply:
> 
> #define pcie_aspm_init() 0
ok
> 
> > Index: linux/drivers/pci/pci-acpi.c
> > ===================================================================
> > --- linux.orig/drivers/pci/pci-acpi.c	2008-01-15 10:16:35.000000000 +0800
> > +++ linux/drivers/pci/pci-acpi.c	2008-01-15 10:16:54.000000000 +0800
> > @@ -15,6 +15,7 @@
> >  #include <acpi/acnamesp.h>
> >  #include <acpi/acresrc.h>
> >  #include <acpi/acpi_bus.h>
> > +#include <linux/aspm.h>
> > 
> >  #include <linux/pci-acpi.h>
> >  #include "pci.h"
> > @@ -349,3 +350,11 @@ static int __init acpi_pci_init(void)
> >  	return 0;
> >  }
> >  arch_initcall(acpi_pci_init);
> > +
> > +/* Called after ACPI is enabled */
> > +static int __init acpi_pcie_support_init(void)
> > +{
> > +	pcie_aspm_init();
> > +	return 0;
> > +}
> > +fs_initcall(acpi_pcie_support_init);
> 
> Is there any reason to put this in here instead of just making
> pcie_aspm_init an initcall?
yes, this will evaluate some ACPI methods, so must be called after ACPI
is initialized, which is a sub_system call

Thanks,
Shaohua

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2008-01-15 05:09    [from the cache]
©2003-2008