lkml.org 
[lkml]   [2008]   [Jan]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject(was: Re:...) [PATCH 12/12] ide-floppy: fix most of the remaining checkpatch.pl issues-v2
... and finally the last one. Whew! I think we're done here for now. :)

--
From: Borislav Petkov <bbpetkov@yahoo.de>
Date: Tue, 15 Jan 2008 21:01:04 +0100
Subject: ide-floppy: fix most of the remaining checkpatch.pl issues-v2

such as
ERROR: switch and case should be at the same indent
ERROR: need spaces around that '=' (ctx:VxV)
ERROR: trailing statements should be on next line
WARNING: no space between function name and open parenthesis '('
WARNING: printk() should include KERN_ facility level
ERROR: That open brace { should be on the previous line
ERROR: use tabs not spaces
ERROR: do not use assignment in if condition
WARNING: braces {} are not necessary for single statement blocks
ERROR: need space after that ',' (ctx:VxV)
WARNING: line over 80 characters
ERROR: do not use assignment in if condition
...
and so on.
Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de>

:100644 100644 4b9a7e9... 0bf6596... M drivers/ide/ide-floppy.c

diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 4b9a7e9..0bf6596 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -4,9 +4,7 @@
* Copyright (C) 1996-1999 Gadi Oxman <gadio@netvision.net.il>
* Copyright (C) 2000-2002 Paul Bristow <paul@paulbristow.net>
* Copyright (C) 2005 Bartlomiej Zolnierkiewicz
- */
-
-/*
+ *
* The driver currently doesn't have any fancy features, just the bare
* minimum read/write support.
*
@@ -51,57 +49,56 @@
#define IDEFLOPPY_DEBUG_LOG 0

/* #define IDEFLOPPY_DEBUG(fmt, args...) printk(KERN_INFO fmt, ## args) */
-#define IDEFLOPPY_DEBUG( fmt, args... )
+#define IDEFLOPPY_DEBUG(fmt, args...)

#if IDEFLOPPY_DEBUG_LOG
#define debug_log(fmt, args...) \
printk(KERN_INFO "ide-floppy: " fmt, ## args)
#else
-#define debug_log(fmt, args... ) do {} while(0)
+#define debug_log(fmt, args...) do {} while (0)
#endif


-/*
- * Some drives require a longer irq timeout.
- */
+/* Some drives require a longer irq timeout. */
#define IDEFLOPPY_WAIT_CMD (5 * WAIT_CMD)

/*
- * After each failed packet command we issue a request sense command
- * and retry the packet command IDEFLOPPY_MAX_PC_RETRIES times.
+ * After each failed packet command we issue a request sense command and retry
+ * the packet command IDEFLOPPY_MAX_PC_RETRIES times.
*/
#define IDEFLOPPY_MAX_PC_RETRIES 3

/*
- * With each packet command, we allocate a buffer of
- * IDEFLOPPY_PC_BUFFER_SIZE bytes.
+ * With each packet command, we allocate a buffer of IDEFLOPPY_PC_BUFFER_SIZE
+ * bytes.
*/
#define IDEFLOPPY_PC_BUFFER_SIZE 256

/*
- * In various places in the driver, we need to allocate storage
- * for packet commands and requests, which will remain valid while
- * we leave the driver to wait for an interrupt or a timeout event.
+ * In various places in the driver, we need to allocate storage for packet
+ * commands and requests, which will remain valid while we leave the driver to
+ * wait for an interrupt or a timeout event.
*/
#define IDEFLOPPY_PC_STACK (10 + IDEFLOPPY_MAX_PC_RETRIES)

-/*
- * Our view of a packet command.
- */
typedef struct idefloppy_packet_command_s {
u8 c[12]; /* Actual packet bytes */
- int retries; /* On each retry, we increment retries */
+ int retries; /* On each retry, we increment
+ retries */
int error; /* Error code */
int request_transfer; /* Bytes to transfer */
int actually_transferred; /* Bytes actually transferred */
int buffer_size; /* Size of our data buffer */
- int b_count; /* Missing/Available data on the current buffer */
+ int b_count; /* Missing/Available data on
+ the current buffer */
struct request *rq; /* The corresponding request */
u8 *buffer; /* Data buffer */
- u8 *current_position; /* Pointer into the above buffer */
- void (*callback) (ide_drive_t *); /* Called when this packet command is completed */
+ u8 *current_position; /* Pointer into above buffer */
+ void (*callback) (ide_drive_t *); /* Called when this packet
+ command is completed */
u8 pc_buffer[IDEFLOPPY_PC_BUFFER_SIZE]; /* Temporary buffer */
- unsigned long flags; /* Status/Action bit flags: long for set_bit */
+ unsigned long flags; /* Status/Action bit flags: long
+ for set_bit */
} idefloppy_pc_t;

/* Packet command flag bits. */
@@ -125,9 +122,9 @@ enum {
#define CAPACITY_NO_CARTRIDGE 0x03

/*
- * Most of our global data which we need to save even as we leave the
- * driver due to an interrupt or a timer event is stored in a variable
- * of type idefloppy_floppy_t, defined below.
+ * Most of our global data which we need to save even as we leave the driver
+ * due to an interrupt or a timer event is stored in a variable of type
+ * idefloppy_floppy_t, defined below.
*/
typedef struct ide_floppy_obj {
ide_drive_t *drive;
@@ -148,17 +145,13 @@ typedef struct ide_floppy_obj {
/* We implement a circular array */
int rq_stack_index;

- /*
- * Last error information
- */
+ /* Last error information */
u8 sense_key, asc, ascq;
/* delay this long before sending packet command */
u8 ticks;
int progress_indication;

- /*
- * Device information
- */
+ /* Device information */
/* Current format */
int blocks, block_size, bs_factor;
/* Last format capacity descriptor */
@@ -189,34 +182,26 @@ enum {
IDEFLOPPY_FLAG_ZIP_DRIVE = (1 << 4),
};

-/*
- * Defines for the mode sense command
- */
+/* Defines for the MODE SENSE command */
#define MODE_SENSE_CURRENT 0x00
#define MODE_SENSE_CHANGEABLE 0x01
-#define MODE_SENSE_DEFAULT 0x02
+#define MODE_SENSE_DEFAULT 0x02
#define MODE_SENSE_SAVED 0x03

-/*
- * IOCTLs used in low-level formatting.
- */
-
+/* IOCTLs used in low-level formatting. */
#define IDEFLOPPY_IOCTL_FORMAT_SUPPORTED 0x4600
#define IDEFLOPPY_IOCTL_FORMAT_GET_CAPACITY 0x4601
#define IDEFLOPPY_IOCTL_FORMAT_START 0x4602
#define IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS 0x4603

-/*
- * Error codes which are returned in rq->errors to the higher part
- * of the driver.
- */
+/* Error code returned in rq->errors to the higher part of the driver. */
#define IDEFLOPPY_ERROR_GENERAL 101

/*
- * The following is used to format the general configuration word of
- * the ATAPI IDENTIFY DEVICE command.
+ * The following is used to format the general configuration word of the
+ * ATAPI IDENTIFY DEVICE command.
*/
-struct idefloppy_id_gcw {
+struct idefloppy_id_gcw {
#if defined(__LITTLE_ENDIAN_BITFIELD)
unsigned packet_size :2; /* Packet Size */
unsigned reserved234 :3; /* Reserved */
@@ -274,10 +259,10 @@ static void ide_floppy_put(struct ide_floppy_obj *floppy)
}

/*
- * Too bad. The drive wants to send us data which we are not ready to accept.
- * Just throw it away.
+ * Too bad. The drive wants to send us data which we are not ready to accept.
+ * Just throw it away.
*/
-static void idefloppy_discard_data (ide_drive_t *drive, unsigned int bcount)
+static void idefloppy_discard_data(ide_drive_t *drive, unsigned int bcount)
{
while (bcount--)
(void) HWIF(drive)->INB(IDE_DATA_REG);
@@ -291,10 +276,8 @@ static void idefloppy_write_zeros(ide_drive_t *drive, unsigned int bcount)


/*
- * idefloppy_do_end_request is used to finish servicing a request.
- *
- * For read/write requests, we will call ide_end_request to pass to the
- * next buffer.
+ * Used to finish servicing a request. For read/write requests, we will call
+ * ide_end_request to pass to the next buffer.
*/
static int idefloppy_do_end_request(ide_drive_t *drive, int uptodate, int nsecs)
{
@@ -305,9 +288,9 @@ static int idefloppy_do_end_request(ide_drive_t *drive, int uptodate, int nsecs)
debug_log("Reached %s\n", __FUNCTION__);

switch (uptodate) {
- case 0: error = IDEFLOPPY_ERROR_GENERAL; break;
- case 1: error = 0; break;
- default: error = uptodate;
+ case 0: error = IDEFLOPPY_ERROR_GENERAL; break;
+ case 1: error = 0; break;
+ default: error = uptodate;
}
if (error)
floppy->failed_pc = NULL;
@@ -366,7 +349,7 @@ static void ide_floppy_io_buffers(ide_drive_t *drive, idefloppy_pc_t *pc,
}
}

-static void idefloppy_update_buffers (ide_drive_t *drive, idefloppy_pc_t *pc)
+static void idefloppy_update_buffers(ide_drive_t *drive, idefloppy_pc_t *pc)
{
struct request *rq = pc->rq;
struct bio *bio = rq->bio;
@@ -376,11 +359,12 @@ static void idefloppy_update_buffers (ide_drive_t *drive, idefloppy_pc_t *pc)
}

/*
- * idefloppy_queue_pc_head generates a new packet command request in front
- * of the request queue, before the current request, so that it will be
- * processed immediately, on the next pass through the driver.
+ * Generate a new packet command request in front of the request queue, before
+ * the current request so that it will be processed immediately, on the next
+ * pass through the driver.
*/
-static void idefloppy_queue_pc_head (ide_drive_t *drive,idefloppy_pc_t *pc,struct request *rq)
+static void idefloppy_queue_pc_head(ide_drive_t *drive, idefloppy_pc_t *pc,
+ struct request *rq)
{
struct ide_floppy_obj *floppy = drive->driver_data;

@@ -391,16 +375,16 @@ static void idefloppy_queue_pc_head (ide_drive_t *drive,idefloppy_pc_t *pc,struc
(void) ide_do_drive_cmd(drive, rq, ide_preempt);
}

-static idefloppy_pc_t *idefloppy_next_pc_storage (ide_drive_t *drive)
+static idefloppy_pc_t *idefloppy_next_pc_storage(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;

if (floppy->pc_stack_index == IDEFLOPPY_PC_STACK)
- floppy->pc_stack_index=0;
+ floppy->pc_stack_index = 0;
return (&floppy->pc_stack[floppy->pc_stack_index++]);
}

-static struct request *idefloppy_next_rq_storage (ide_drive_t *drive)
+static struct request *idefloppy_next_rq_storage(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;

@@ -445,10 +429,8 @@ static void idefloppy_request_sense_callback(ide_drive_t *drive)
}
}

-/*
- * General packet command callback function.
- */
-static void idefloppy_pc_callback (ide_drive_t *drive)
+/* General packet command callback function. */
+static void idefloppy_pc_callback(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;

@@ -457,10 +439,7 @@ static void idefloppy_pc_callback (ide_drive_t *drive)
idefloppy_do_end_request(drive, floppy->pc->error ? 0 : 1, 0);
}

-/*
- * idefloppy_init_pc initializes a packet command.
- */
-static void idefloppy_init_pc (idefloppy_pc_t *pc)
+static void idefloppy_init_pc(idefloppy_pc_t *pc)
{
memset(pc->c, 0, 12);
pc->retries = 0;
@@ -471,7 +450,7 @@ static void idefloppy_init_pc (idefloppy_pc_t *pc)
pc->callback = &idefloppy_pc_callback;
}

-static void idefloppy_create_request_sense_cmd (idefloppy_pc_t *pc)
+static void idefloppy_create_request_sense_cmd(idefloppy_pc_t *pc)
{
idefloppy_init_pc(pc);
pc->c[0] = GPCMD_REQUEST_SENSE;
@@ -481,11 +460,10 @@ static void idefloppy_create_request_sense_cmd (idefloppy_pc_t *pc)
}

/*
- * idefloppy_retry_pc is called when an error was detected during the
- * last packet command. We queue a request sense packet command in
- * the head of the request list.
+ * Called when an error was detected during the last packet command. We queue a
+ * request sense packet command in the head of the request list.
*/
-static void idefloppy_retry_pc (ide_drive_t *drive)
+static void idefloppy_retry_pc(ide_drive_t *drive)
{
idefloppy_pc_t *pc;
struct request *rq;
@@ -529,7 +507,8 @@ static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive)
/* Clear the interrupt */
stat = drive->hwif->INB(IDE_STATUS_REG);

- if ((stat & DRQ_STAT) == 0) { /* No more interrupts */
+ /* No more interrupts */
+ if ((stat & DRQ_STAT) == 0) {
debug_log("Packet command completed, %d bytes transferred\n",
pc->actually_transferred);
pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
@@ -629,7 +608,7 @@ static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive)
* It fails at high speeds on the Iomega ZIP drive, so there's a slower version
* for that drive below. The algorithm is chosen based on drive type
*/
-static ide_startstop_t idefloppy_transfer_pc (ide_drive_t *drive)
+static ide_startstop_t idefloppy_transfer_pc(ide_drive_t *drive)
{
ide_startstop_t startstop;
idefloppy_floppy_t *floppy = drive->driver_data;
@@ -656,18 +635,16 @@ static ide_startstop_t idefloppy_transfer_pc (ide_drive_t *drive)


/*
- * What we have here is a classic case of a top half / bottom half
- * interrupt service routine. In interrupt mode, the device sends
- * an interrupt to signal it's ready to receive a packet. However,
- * we need to delay about 2-3 ticks before issuing the packet or we
- * gets in trouble.
+ * What we have here is a classic case of a top half / bottom half interrupt
+ * service routine. In interrupt mode, the device sends an interrupt to signal
+ * that it is ready to receive a packet. However, we need to delay about 2-3
+ * ticks before issuing the packet or we gets in trouble.
*
- * So, follow carefully. transfer_pc1 is called as an interrupt (or
- * directly). In either case, when the device says it's ready for a
- * packet, we schedule the packet transfer to occur about 2-3 ticks
- * later in transfer_pc2.
+ * So, follow carefully. transfer_pc1 is called as an interrupt (or directly).
+ * In either case, when the device says it's ready for a packet, we schedule
+ * the packet transfer to occur about 2-3 ticks later in transfer_pc2.
*/
-static int idefloppy_transfer_pc2 (ide_drive_t *drive)
+static int idefloppy_transfer_pc2(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;

@@ -677,7 +654,7 @@ static int idefloppy_transfer_pc2 (ide_drive_t *drive)
return IDEFLOPPY_WAIT_CMD;
}

-static ide_startstop_t idefloppy_transfer_pc1 (ide_drive_t *drive)
+static ide_startstop_t idefloppy_transfer_pc1(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;
ide_startstop_t startstop;
@@ -694,7 +671,7 @@ static ide_startstop_t idefloppy_transfer_pc1 (ide_drive_t *drive)
"while issuing a packet command\n");
return ide_do_reset(drive);
}
- /*
+ /*
* The following delay solves a problem with ATAPI Zip 100 drives
* where the Busy flag was apparently being deasserted before the
* unit was ready to receive data. This was happening on a
@@ -703,10 +680,8 @@ static ide_startstop_t idefloppy_transfer_pc1 (ide_drive_t *drive)
* used until after the packet is moved in about 50 msec.
*/

- ide_set_handler(drive,
- &idefloppy_pc_intr, /* service routine for packet command */
- floppy->ticks, /* wait this long before "failing" */
- &idefloppy_transfer_pc2); /* fail == transfer_pc2 */
+ ide_set_handler(drive, &idefloppy_pc_intr, floppy->ticks,
+ &idefloppy_transfer_pc2);
return ide_started;
}

@@ -726,10 +701,8 @@ static void ide_floppy_report_error(idefloppy_floppy_t *floppy,

}

-/*
- * Issue a packet command
- */
-static ide_startstop_t idefloppy_issue_pc (ide_drive_t *drive, idefloppy_pc_t *pc)
+static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive,
+ idefloppy_pc_t *pc)
{
idefloppy_floppy_t *floppy = drive->driver_data;
ide_hwif_t *hwif = drive->hwif;
@@ -774,7 +747,8 @@ static ide_startstop_t idefloppy_issue_pc (ide_drive_t *drive, idefloppy_pc_t *p
ide_pktcmd_tf_load(drive, IDE_TFLAG_NO_SELECT_MASK |
IDE_TFLAG_OUT_DEVICE, bcount, dma);

- if (dma) { /* Begin DMA, if necessary */
+ if (dma) {
+ /* Begin DMA, if necessary */
pc->flags |= PC_FLAG_DMA_IN_PROGRESS;
hwif->dma_start(drive);
}
@@ -802,7 +776,7 @@ static ide_startstop_t idefloppy_issue_pc (ide_drive_t *drive, idefloppy_pc_t *p
}
}

-static void idefloppy_rw_callback (ide_drive_t *drive)
+static void idefloppy_rw_callback(ide_drive_t *drive)
{
debug_log("Reached %s\n", __FUNCTION__);

@@ -810,7 +784,7 @@ static void idefloppy_rw_callback (ide_drive_t *drive)
return;
}

-static void idefloppy_create_prevent_cmd (idefloppy_pc_t *pc, int prevent)
+static void idefloppy_create_prevent_cmd(idefloppy_pc_t *pc, int prevent)
{
debug_log("creating prevent removal command, prevent = %d\n", prevent);

@@ -819,7 +793,7 @@ static void idefloppy_create_prevent_cmd (idefloppy_pc_t *pc, int prevent)
pc->c[4] = prevent;
}

-static void idefloppy_create_read_capacity_cmd (idefloppy_pc_t *pc)
+static void idefloppy_create_read_capacity_cmd(idefloppy_pc_t *pc)
{
idefloppy_init_pc(pc);
pc->c[0] = GPCMD_READ_FORMAT_CAPACITIES;
@@ -828,7 +802,7 @@ static void idefloppy_create_read_capacity_cmd (idefloppy_pc_t *pc)
pc->request_transfer = 255;
}

-static void idefloppy_create_format_unit_cmd (idefloppy_pc_t *pc, int b, int l,
+static void idefloppy_create_format_unit_cmd(idefloppy_pc_t *pc, int b, int l,
int flags)
{
idefloppy_init_pc(pc);
@@ -845,38 +819,37 @@ static void idefloppy_create_format_unit_cmd (idefloppy_pc_t *pc, int b, int l,

put_unaligned(cpu_to_be32(b), (unsigned int *)(&pc->buffer[4]));
put_unaligned(cpu_to_be32(l), (unsigned int *)(&pc->buffer[8]));
- pc->buffer_size=12;
+ pc->buffer_size = 12;
pc->flags |= PC_FLAG_WRITING;
}

-/*
- * A mode sense command is used to "sense" floppy parameters.
- */
-static void idefloppy_create_mode_sense_cmd (idefloppy_pc_t *pc, u8 page_code, u8 type)
+/* A mode sense command is used to "sense" floppy parameters. */
+static void idefloppy_create_mode_sense_cmd(idefloppy_pc_t *pc, u8 page_code,
+ u8 type)
{
u16 length = 8; /* sizeof(Mode Parameter Header) = 8 Bytes */
-
+
idefloppy_init_pc(pc);
pc->c[0] = GPCMD_MODE_SENSE_10;
pc->c[1] = 0;
pc->c[2] = page_code + (type << 6);

switch (page_code) {
- case IDEFLOPPY_CAPABILITIES_PAGE:
- length += 12;
- break;
- case IDEFLOPPY_FLEXIBLE_DISK_PAGE:
- length += 32;
- break;
- default:
- printk(KERN_ERR "ide-floppy: unsupported page code "
+ case IDEFLOPPY_CAPABILITIES_PAGE:
+ length += 12;
+ break;
+ case IDEFLOPPY_FLEXIBLE_DISK_PAGE:
+ length += 32;
+ break;
+ default:
+ printk(KERN_ERR "ide-floppy: unsupported page code "
"in create_mode_sense_cmd\n");
}
put_unaligned(cpu_to_be16(length), (u16 *) &pc->c[7]);
pc->request_transfer = length;
}

-static void idefloppy_create_start_stop_cmd (idefloppy_pc_t *pc, int start)
+static void idefloppy_create_start_stop_cmd(idefloppy_pc_t *pc, int start)
{
idefloppy_init_pc(pc);
pc->c[0] = GPCMD_START_STOP_UNIT;
@@ -914,8 +887,8 @@ static void idefloppy_create_rw_cmd(idefloppy_floppy_t *floppy,
pc->flags |= PC_FLAG_DMA_RECOMMENDED;
}

-static void
-idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy, idefloppy_pc_t *pc, struct request *rq)
+static void idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy,
+ idefloppy_pc_t *pc, struct request *rq)
{
idefloppy_init_pc(pc);
pc->callback = &idefloppy_rw_callback;
@@ -934,10 +907,8 @@ idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy, idefloppy_pc_t *pc, struct req
pc->request_transfer = pc->buffer_size = rq->data_len;
}

-/*
- * idefloppy_do_request is our request handling function.
- */
-static ide_startstop_t idefloppy_do_request (ide_drive_t *drive, struct request *rq, sector_t block_s)
+static ide_startstop_t idefloppy_do_request(ide_drive_t *drive,
+ struct request *rq, sector_t block_s)
{
idefloppy_floppy_t *floppy = drive->driver_data;
idefloppy_pc_t *pc;
@@ -962,8 +933,8 @@ static ide_startstop_t idefloppy_do_request (ide_drive_t *drive, struct request
if (blk_fs_request(rq)) {
if (((long)rq->sector % floppy->bs_factor) ||
(rq->nr_sectors % floppy->bs_factor)) {
- printk("%s: unsupported r/w request size\n",
- drive->name);
+ printk(KERN_ERR "%s: unsupported r/w request size\n",
+ drive->name);
idefloppy_do_end_request(drive, 0, 0);
return ide_stopped;
}
@@ -986,15 +957,15 @@ static ide_startstop_t idefloppy_do_request (ide_drive_t *drive, struct request
}

/*
- * idefloppy_queue_pc_tail adds a special packet command request to the
- * tail of the request queue, and waits for it to be serviced.
+ * Add a special packet command request to the tail of the request queue,
+ * and wait for it to be serviced.
*/
-static int idefloppy_queue_pc_tail (ide_drive_t *drive,idefloppy_pc_t *pc)
+static int idefloppy_queue_pc_tail(ide_drive_t *drive, idefloppy_pc_t *pc)
{
struct ide_floppy_obj *floppy = drive->driver_data;
struct request rq;

- ide_init_drive_cmd (&rq);
+ ide_init_drive_cmd(&rq);
rq.buffer = (char *) pc;
rq.cmd_type = REQ_TYPE_SPECIAL;
rq.rq_disk = floppy->disk;
@@ -1121,7 +1092,7 @@ static int ide_floppy_get_capacity(ide_drive_t *drive)
/* Clik! drive returns this instead of CAPACITY_CURRENT */
case CAPACITY_UNFORMATTED:
if (!(floppy->flags & IDEFLOPPY_FLAG_CLIK_DRIVE))
- /*
+ /*
* If it is not a clik drive, break out
* (maintains previous driver behaviour)
*/
@@ -1247,14 +1218,14 @@ static int ide_floppy_get_format_capacities(ide_drive_t *drive, int __user *arg)
}

/*
-** Get ATAPI_FORMAT_UNIT progress indication.
-**
-** Userland gives a pointer to an int. The int is set to a progress
-** indicator 0-65536, with 65536=100%.
-**
-** If the drive does not support format progress indication, we just check
-** the dsc bit, and return either 0 or 65536.
-*/
+ * Get ATAPI_FORMAT_UNIT progress indication.
+ *
+ * Userland gives a pointer to an int. The int is set to a progress
+ * indicator 0-65536, with 65536=100%.
+ *
+ * If the drive does not support format progress indication, we just check
+ * the dsc bit, and return either 0 or 65536.
+ */

static int idefloppy_get_format_progress(ide_drive_t *drive, int __user *arg)
{
@@ -1264,17 +1235,15 @@ static int idefloppy_get_format_progress(ide_drive_t *drive, int __user *arg)

if (floppy->srfp) {
idefloppy_create_request_sense_cmd(&pc);
- if (idefloppy_queue_pc_tail(drive, &pc)) {
+ if (idefloppy_queue_pc_tail(drive, &pc))
return (-EIO);
- }

if (floppy->sense_key == 2 &&
floppy->asc == 4 &&
- floppy->ascq == 4) {
+ floppy->ascq == 4)
progress_indication = floppy->progress_indication;
- }
- /* Else assume format_unit has finished, and we're
- ** at 0x10000 */
+
+ /* Else assume format_unit has finished, and we're at 0x10000 */
} else {
unsigned long flags;
u8 stat;
@@ -1291,10 +1260,7 @@ static int idefloppy_get_format_progress(ide_drive_t *drive, int __user *arg)
return (0);
}

-/*
- * Return the current floppy capacity.
- */
-static sector_t idefloppy_capacity (ide_drive_t *drive)
+static sector_t idefloppy_capacity(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;
unsigned long capacity = floppy->blocks * floppy->bs_factor;
@@ -1344,22 +1310,20 @@ static void idefloppy_add_settings(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;

-/*
- * drive setting name read/write data type min max mul_factor div_factor data pointer set function
- */
- ide_add_setting(drive, "bios_cyl", SETTING_RW, TYPE_INT, 0, 1023, 1, 1, &drive->bios_cyl, NULL);
- ide_add_setting(drive, "bios_head", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1, &drive->bios_head, NULL);
- ide_add_setting(drive, "bios_sect", SETTING_RW, TYPE_BYTE, 0, 63, 1, 1, &drive->bios_sect, NULL);
- ide_add_setting(drive, "ticks", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1, &floppy->ticks, NULL);
+ ide_add_setting(drive, "bios_cyl", SETTING_RW, TYPE_INT, 0, 1023, 1, 1,
+ &drive->bios_cyl, NULL);
+ ide_add_setting(drive, "bios_head", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1,
+ &drive->bios_head, NULL);
+ ide_add_setting(drive, "bios_sect", SETTING_RW, TYPE_BYTE, 0, 63, 1, 1,
+ &drive->bios_sect, NULL);
+ ide_add_setting(drive, "ticks", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1,
+ &floppy->ticks, NULL);
}
#else
static inline void idefloppy_add_settings(ide_drive_t *drive) { ; }
#endif

-/*
- * Driver initialization.
- */
-static void idefloppy_setup (ide_drive_t *drive, idefloppy_floppy_t *floppy)
+static void idefloppy_setup(ide_drive_t *drive, idefloppy_floppy_t *floppy)
{
struct idefloppy_id_gcw gcw;

@@ -1368,16 +1332,14 @@ static void idefloppy_setup (ide_drive_t *drive, idefloppy_floppy_t *floppy)
if (gcw.drq_type == 1)
floppy->flags |= IDEFLOPPY_FLAG_DRQ_INTERRUPT;
/*
- * We used to check revisions here. At this point however
- * I'm giving up. Just assume they are all broken, its easier.
+ * We used to check revisions here. At this point however I'm giving up.
+ * Just assume they are all broken, its easier.
*
- * The actual reason for the workarounds was likely
- * a driver bug after all rather than a firmware bug,
- * and the workaround below used to hide it. It should
- * be fixed as of version 1.9, but to be on the safe side
- * we'll leave the limitation below for the 2.2.x tree.
+ * The actual reason for the workarounds was likely a driver bug after
+ * all rather than a firmware bug, and the workaround below used to hide
+ * it. It should be fixed as of version 1.9, but to be on the safe side
+ * we'll leave the limitation below for the 2.2.x tree.
*/
-
if (!strncmp(drive->id->model, "IOMEGA ZIP 100 ATAPI", 20)) {
floppy->flags |= IDEFLOPPY_FLAG_ZIP_DRIVE;
/* This value will be visible in the /proc/ide/hdx/settings */
@@ -1386,16 +1348,14 @@ static void idefloppy_setup (ide_drive_t *drive, idefloppy_floppy_t *floppy)
}

/*
- * Guess what? The IOMEGA Clik! drive also needs the
- * above fix. It makes nasty clicking noises without
- * it, so please don't remove this.
- */
+ * Guess what? The IOMEGA Clik! drive also needs the above fix. It makes
+ * nasty clicking noises without it, so please don't remove this.
+ */
if (strncmp(drive->id->model, "IOMEGA Clik!", 11) == 0) {
blk_queue_max_sectors(drive->queue, 64);
floppy->flags |= IDEFLOPPY_FLAG_CLIK_DRIVE;
}

-
(void) ide_floppy_get_capacity(drive);
idefloppy_add_settings(drive);
}
@@ -1425,19 +1385,19 @@ static void idefloppy_cleanup_obj(struct kref *kref)
}

#ifdef CONFIG_IDE_PROC_FS
-static int proc_idefloppy_read_capacity
- (char *page, char **start, off_t off, int count, int *eof, void *data)
+static int proc_idefloppy_read_capacity(char *page, char **start, off_t off,
+ int count, int *eof, void *data)
{
ide_drive_t*drive = (ide_drive_t *)data;
int len;

- len = sprintf(page,"%llu\n", (long long)idefloppy_capacity(drive));
- PROC_IDE_READ_RETURN(page,start,off,count,eof,len);
+ len = sprintf(page, "%llu\n", (long long)idefloppy_capacity(drive));
+ PROC_IDE_READ_RETURN(page, start, off, count, eof, len);
}

static ide_proc_entry_t idefloppy_proc[] = {
- { "capacity", S_IFREG|S_IRUGO, proc_idefloppy_read_capacity, NULL },
- { "geometry", S_IFREG|S_IRUGO, proc_ide_read_geometry, NULL },
+ { "capacity", S_IFREG|S_IRUGO, proc_idefloppy_read_capacity, NULL },
+ { "geometry", S_IFREG|S_IRUGO, proc_ide_read_geometry, NULL },
{ NULL, 0, NULL, NULL }
};
#endif /* CONFIG_IDE_PROC_FS */
@@ -1474,7 +1434,8 @@ static int idefloppy_open(struct inode *inode, struct file *filp)

debug_log("Reached %s\n", __FUNCTION__);

- if (!(floppy = ide_floppy_get(disk)))
+ floppy = ide_floppy_get(disk);
+ if (!floppy)
return -ENXIO;

drive = floppy->drive;
@@ -1494,10 +1455,10 @@ static int idefloppy_open(struct inode *inode, struct file *filp)
if (ide_floppy_get_capacity(drive)
&& (filp->f_flags & O_NDELAY) == 0
/*
- ** Allow O_NDELAY to open a drive without a disk, or with
- ** an unreadable disk, so that we can get the format
- ** capacity of the drive or begin the format - Sam
- */
+ * Allow O_NDELAY to open a drive without a disk, or with an
+ * unreadable disk, so that we can get the format capacity
+ * of the drive or begin the format - Sam
+ */
) {
ret = -EIO;
goto out_put_floppy;
@@ -1726,16 +1687,20 @@ static int ide_floppy_probe(ide_drive_t *drive)
goto failed;
if (drive->media != ide_floppy)
goto failed;
- if (!idefloppy_identify_device (drive, drive->id)) {
- printk (KERN_ERR "ide-floppy: %s: not supported by this version of ide-floppy\n", drive->name);
+ if (!idefloppy_identify_device(drive, drive->id)) {
+ printk(KERN_ERR "ide-floppy: %s: not supported by this version"
+ " of ide-floppy\n", drive->name);
goto failed;
}
if (drive->scsi) {
- printk("ide-floppy: passing drive %s to ide-scsi emulation.\n", drive->name);
+ printk(KERN_INFO "ide-floppy: passing drive %s to ide-scsi"
+ " emulation.\n", drive->name);
goto failed;
}
- if ((floppy = kzalloc(sizeof (idefloppy_floppy_t), GFP_KERNEL)) == NULL) {
- printk (KERN_ERR "ide-floppy: %s: Can't allocate a floppy structure\n", drive->name);
+ floppy = kzalloc(sizeof(idefloppy_floppy_t), GFP_KERNEL);
+ if (!floppy) {
+ printk(KERN_ERR "ide-floppy: %s: Can't allocate a floppy"
+ " structure\n", drive->name);
goto failed;
}

@@ -1757,7 +1722,7 @@ static int ide_floppy_probe(ide_drive_t *drive)

drive->driver_data = floppy;

- idefloppy_setup (drive, floppy);
+ idefloppy_setup(drive, floppy);

g->minors = 1 << PARTN_BITS;
g->driverfs_dev = &drive->gendev;
@@ -1773,9 +1738,7 @@ failed:
return -ENODEV;
}

-MODULE_DESCRIPTION("ATAPI FLOPPY Driver");
-
-static void __exit idefloppy_exit (void)
+static void __exit idefloppy_exit(void)
{
driver_unregister(&idefloppy_driver.gen_driver);
}
@@ -1790,3 +1753,5 @@ MODULE_ALIAS("ide:*m-floppy*");
module_init(idefloppy_init);
module_exit(idefloppy_exit);
MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("ATAPI FLOPPY Driver");
+
--
1.5.3.7
--
Regards/Gruß,
Boris.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2008-01-15 21:19    [from the cache]
©2003-2014 Jasper Spaans. Advertise on this site