[lkml]   [2008]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH 5/6] Driver for WM97xx touchscreens in streaming mode on PXA2xx systems
Mark Brown wrote:
> On Mon, Jan 14, 2008 at 10:56:06AM +0100, Marc Kleine-Budde wrote:
>> reMark Brown wrote:
>>> Cc: Marc Kleine-Budde <>
>> ^^
>> it's
> Fixed, sorry about that.
>>> + /* use PEN_DOWN GPIO 13 to assert IRQ on GPIO line 2 */
>>> + wm->pen_irq = MAINSTONE_AC97_IRQ;
>> I'm missing some kind of abstraction here, what about non mainstone
>> boards with the pen irq wired to some other gpio?
> The driver really isn't intended to cope with them. As you say, other
> boards may have things wired up differently and therefore require
> different configuration of the wm97xx and other bits of the system. The
> expectation is that other systems will have their own driver.

What bits have to setup in a different way? Only the stuff in
wm97xx_acc_startup() or other things aswell. An irq can be put as utual
into a device's resouce, Setting up bits may be done like other stuff on
pxa, too. e.g. pxa_set_ohci_info.

> My initial thought is that the most straightforward way of handling this
> would be to rename the driver to mainstone-wm97xx or similar to make it
> clear that the driver is only intended to handle Mainstone as-is. Does
> that seem reasonable?

With my limited understanding of the pxa-wm97xx.c file, the only board
dependent stuff is done in wm97xx_acc_startup() so a different "driver"
for other boards would result in code duplication.

regards - Marc

Marc Kleine-Budde Phone: +49-231-2826-924
Pengutronix - Linux Solutions for Science and Industry
Vertretung West/Dortmund

[unhandled content-type:application/pgp-signature]
 \ /
  Last update: 2008-01-14 16:09    [W:0.043 / U:1.664 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site