lkml.org 
[lkml]   [2008]   [Jan]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[git patches] libata fixes

Still working through the backlog, but this is most of the immediate
libata stuff. I asked DaveM to help out with netdev fixes, so there
shouldn't be much of a 2.6.24-rc backlog at all there (thanks again David).

Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus

to receive the following updates:

Documentation/kernel-parameters.txt | 8 +++++++
drivers/ata/libata-eh.c | 24 +++++++++++++++-------
drivers/ata/libata-pmp.c | 12 ++++------
drivers/ata/libata-scsi.c | 3 +-
drivers/ata/libata-sff.c | 7 ++++-
drivers/ata/pata_ixp4xx_cf.c | 3 +-
drivers/ata/pata_pdc202xx_old.c | 15 ++++++++++++-
drivers/ata/sata_qstor.c | 2 +-
drivers/ata/sata_sil24.c | 37 ++++++++++++++++++++++++----------
9 files changed, 78 insertions(+), 33 deletions(-)

Alan Cox (2):
libata-sff: PCI IRQ handling fix
pata_pdc202xx_old: Further fixups

FD Cami (1):
Update kernel parameter document for libata DMA mode setting knobs.

Gwendal Grignou (1):
sata_sil24: prevent hba lockup when pass-through ATA commands are used

Ondrej Zary (1):
libata and starting/stopping ATAPI floppy devices

Rod Whitby (1):
pata_ixp4xx_cf: fix compilation introduced by ata_port_desc() conversion

Tejun Heo (4):
sata_qstor: use hardreset instead of softreset
libata-pmp: 4726 hates SRST
libata-pmp: propagate timeout to host link
libata: don't normalize UNKNOWN to NONE after reset

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index e5b447a..c417877 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -883,6 +883,14 @@ and is between 256 and 4096 characters. It is defined in the file
lapic_timer_c2_ok [X86-32,x86-64,APIC] trust the local apic timer in
C2 power state.

+ libata.dma= [LIBATA] DMA control
+ libata.dma=0 Disable all PATA and SATA DMA
+ libata.dma=1 PATA and SATA Disk DMA only
+ libata.dma=2 ATAPI (CDROM) DMA only
+ libata.dma=4 Compact Flash DMA only
+ Combinations also work, so libata.dma=3 enables DMA
+ for disks and CDROMs, but not CFs.
+
libata.noacpi [LIBATA] Disables use of ACPI in libata suspend/resume
when set.
Format: <int>
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index f0124a8..21a81cd 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1733,11 +1733,15 @@ static void ata_eh_link_autopsy(struct ata_link *link)
ehc->i.action &= ~ATA_EH_PERDEV_MASK;
}

- /* consider speeding down */
+ /* propagate timeout to host link */
+ if ((all_err_mask & AC_ERR_TIMEOUT) && !ata_is_host_link(link))
+ ap->link.eh_context.i.err_mask |= AC_ERR_TIMEOUT;
+
+ /* record error and consider speeding down */
dev = ehc->i.dev;
- if (!dev && ata_link_max_devices(link) == 1 &&
- ata_dev_enabled(link->device))
- dev = link->device;
+ if (!dev && ((ata_link_max_devices(link) == 1 &&
+ ata_dev_enabled(link->device))))
+ dev = link->device;

if (dev)
ehc->i.action |= ata_eh_speed_down(dev, is_io, all_err_mask);
@@ -1759,8 +1763,14 @@ void ata_eh_autopsy(struct ata_port *ap)
{
struct ata_link *link;

- __ata_port_for_each_link(link, ap)
+ ata_port_for_each_link(link, ap)
ata_eh_link_autopsy(link);
+
+ /* Autopsy of fanout ports can affect host link autopsy.
+ * Perform host link autopsy last.
+ */
+ if (ap->nr_pmp_links)
+ ata_eh_link_autopsy(&ap->link);
}

/**
@@ -2157,13 +2167,11 @@ int ata_eh_reset(struct ata_link *link, int classify,
if (ata_link_offline(link))
continue;

- /* apply class override and convert UNKNOWN to NONE */
+ /* apply class override */
if (lflags & ATA_LFLAG_ASSUME_ATA)
classes[dev->devno] = ATA_DEV_ATA;
else if (lflags & ATA_LFLAG_ASSUME_SEMB)
classes[dev->devno] = ATA_DEV_SEMB_UNSUP; /* not yet */
- else if (classes[dev->devno] == ATA_DEV_UNKNOWN)
- classes[dev->devno] = ATA_DEV_NONE;
}

/* record current link speed */
diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c
index c0c4dbc..caef2bb 100644
--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -495,14 +495,12 @@ static void sata_pmp_quirks(struct ata_port *ap)
/* SError.N need a kick in the ass to get working */
link->flags |= ATA_LFLAG_HRST_TO_RESUME;

- /* class code report is unreliable */
- if (link->pmp < 5)
- link->flags |= ATA_LFLAG_ASSUME_ATA;
-
- /* The config device, which can be either at
- * port 0 or 5, locks up on SRST.
+ /* Class code report is unreliable and SRST
+ * times out under certain configurations.
+ * Config device can be at port 0 or 5 and
+ * locks up on SRST.
*/
- if (link->pmp == 0 || link->pmp == 5)
+ if (link->pmp <= 5)
link->flags |= ATA_LFLAG_NO_SRST |
ATA_LFLAG_ASSUME_ATA;

diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index a883bb0..264ae60 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -872,7 +872,8 @@ int ata_scsi_slave_config(struct scsi_device *sdev)

ata_scsi_sdev_config(sdev);

- sdev->manage_start_stop = 1;
+ if (dev->class == ATA_DEV_ATA)
+ sdev->manage_start_stop = 1;

if (dev)
ata_scsi_dev_config(sdev, dev);
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 48acc09..b7ac80b 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -806,7 +806,10 @@ int ata_pci_init_one(struct pci_dev *pdev,
if (rc)
goto err_out;

- if (!legacy_mode) {
+ if (!legacy_mode && pdev->irq) {
+ /* We may have no IRQ assigned in which case we can poll. This
+ shouldn't happen on a sane system but robustness is cheap
+ in this case */
rc = devm_request_irq(dev, pdev->irq, pi->port_ops->irq_handler,
IRQF_SHARED, DRV_NAME, host);
if (rc)
@@ -814,7 +817,7 @@ int ata_pci_init_one(struct pci_dev *pdev,

ata_port_desc(host->ports[0], "irq %d", pdev->irq);
ata_port_desc(host->ports[1], "irq %d", pdev->irq);
- } else {
+ } else if (legacy_mode) {
if (!ata_port_is_dummy(host->ports[0])) {
rc = devm_request_irq(dev, ATA_PRIMARY_IRQ(pdev),
pi->port_ops->irq_handler,
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index fcd532a..120b5bf 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -130,10 +130,11 @@ static struct ata_port_operations ixp4xx_port_ops = {
.port_start = ata_port_start,
};

-static void ixp4xx_setup_port(struct ata_ioports *ioaddr,
+static void ixp4xx_setup_port(struct ata_port *ap,
struct ixp4xx_pata_data *data,
unsigned long raw_cs0, unsigned long raw_cs1)
{
+ struct ata_ioports *ioaddr = &ap->ioaddr;
unsigned long raw_cmd = raw_cs0;
unsigned long raw_ctl = raw_cs1 + 0x06;

diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c
index bc7c2d5..8f28156 100644
--- a/drivers/ata/pata_pdc202xx_old.c
+++ b/drivers/ata/pata_pdc202xx_old.c
@@ -215,8 +215,8 @@ static void pdc2026x_bmdma_stop(struct ata_queued_cmd *qc)
/* Flip back to 33Mhz for PIO */
if (adev->dma_mode >= XFER_UDMA_2)
iowrite8(ioread8(clock) & ~sel66, clock);
-
ata_bmdma_stop(qc);
+ pdc202xx_set_piomode(ap, adev);
}

/**
@@ -233,6 +233,17 @@ static void pdc2026x_dev_config(struct ata_device *adev)
adev->max_sectors = 256;
}

+static int pdc2026x_port_start(struct ata_port *ap)
+{
+ void __iomem *bmdma = ap->ioaddr.bmdma_addr;
+ if (bmdma) {
+ /* Enable burst mode */
+ u8 burst = ioread8(bmdma + 0x1f);
+ iowrite8(burst | 0x01, bmdma + 0x1f);
+ }
+ return ata_sff_port_start(ap);
+}
+
static struct scsi_host_template pdc202xx_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
@@ -313,7 +324,7 @@ static struct ata_port_operations pdc2026x_port_ops = {
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,

- .port_start = ata_sff_port_start,
+ .port_start = pdc2026x_port_start,
};

static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id)
diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c
index 2f1de6e..c68b241 100644
--- a/drivers/ata/sata_qstor.c
+++ b/drivers/ata/sata_qstor.c
@@ -270,7 +270,7 @@ static int qs_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val)
static void qs_error_handler(struct ata_port *ap)
{
qs_enter_reg_mode(ap);
- ata_do_eh(ap, qs_prereset, ata_std_softreset, NULL,
+ ata_do_eh(ap, qs_prereset, NULL, sata_std_hardreset,
ata_std_postreset);
}

diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index 96fd526..b4c674d 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -832,16 +832,31 @@ static int sil24_qc_defer(struct ata_queued_cmd *qc)
struct ata_link *link = qc->dev->link;
struct ata_port *ap = link->ap;
u8 prot = qc->tf.protocol;
- int is_atapi = (prot == ATA_PROT_ATAPI ||
- prot == ATA_PROT_ATAPI_NODATA ||
- prot == ATA_PROT_ATAPI_DMA);
-
- /* ATAPI commands completing with CHECK_SENSE cause various
- * weird problems if other commands are active. PMP DMA CS
- * errata doesn't cover all and HSM violation occurs even with
- * only one other device active. Always run an ATAPI command
- * by itself.
- */
+
+ /*
+ * There is a bug in the chip:
+ * Port LRAM Causes the PRB/SGT Data to be Corrupted
+ * If the host issues a read request for LRAM and SActive registers
+ * while active commands are available in the port, PRB/SGT data in
+ * the LRAM can become corrupted. This issue applies only when
+ * reading from, but not writing to, the LRAM.
+ *
+ * Therefore, reading LRAM when there is no particular error [and
+ * other commands may be outstanding] is prohibited.
+ *
+ * To avoid this bug there are two situations where a command must run
+ * exclusive of any other commands on the port:
+ *
+ * - ATAPI commands which check the sense data
+ * - Passthrough ATA commands which always have ATA_QCFLAG_RESULT_TF
+ * set.
+ *
+ */
+ int is_excl = (prot == ATA_PROT_ATAPI ||
+ prot == ATA_PROT_ATAPI_NODATA ||
+ prot == ATA_PROT_ATAPI_DMA ||
+ (qc->flags & ATA_QCFLAG_RESULT_TF));
+
if (unlikely(ap->excl_link)) {
if (link == ap->excl_link) {
if (ap->nr_active_links)
@@ -849,7 +864,7 @@ static int sil24_qc_defer(struct ata_queued_cmd *qc)
qc->flags |= ATA_QCFLAG_CLEAR_EXCL;
} else
return ATA_DEFER_PORT;
- } else if (unlikely(is_atapi)) {
+ } else if (unlikely(is_excl)) {
ap->excl_link = link;
if (ap->nr_active_links)
return ATA_DEFER_PORT;

\
 
 \ /
  Last update: 2008-01-10 23:47    [W:1.552 / U:0.664 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site