Messages in this thread |  | | | Date | Sat, 08 Sep 2007 17:14:50 +0200 | | From | Werner Meurer <> | | Subject | PROBLEM: Network sky2 Module |
| |
[1.] One line summary of the problem:
hw csum failure appears in syslog
[2.] Full description of the problem/report:
hw csum failure appears in syslog and sometimes, under heavy network utilization, with NFS-Daemon the Network Device totally fails. Then no Network Access is possible. Reboot is not required but i must restart the Network with the following commands: "ifdown eth0" and "rmmod sky2", then "insmod sky2" and "ifup eth0".
[3.] Keywords (i.e., modules, networking, kernel):
sky2 (Marvell Yukon Onboard Ethernet), networking, checksum
[4.] Kernel version (from /proc/version):
Linux version 2.6.18.8 (root@endeavour) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #6 SMP Sun Aug 5 15:09:57 CEST 2007
[5.] Output of Oops.. message (if applicable) with symbolic information resolved (see Documentation/oops-tracing.txt)
endeavour:~ # dmesg -c <unknown>: hw csum failure.
Call Trace: [<ffffffff80248cbc>] __skb_checksum_complete+0x4a/0x62 [<ffffffff803bc9c4>] udp_poll+0x67/0xf3 [<ffffffff8020f3f4>] do_select+0x285/0x46d [<ffffffff8021c589>] __pollwait+0x0/0xe0 [<ffffffff8027ee8f>] default_wake_function+0x0/0xe [<ffffffff8025e0a0>] _spin_lock_bh+0x9/0x14 [<ffffffff8022ec61>] release_sock+0x13/0xaa [<ffffffff8024da32>] udp_sendmsg+0x480/0x563 [<ffffffff80250300>] sock_sendmsg+0xf3/0x110 [<ffffffff8022e430>] sock_recvmsg+0x101/0x120 [<ffffffff80292267>] autoremove_wake_function+0x0/0x2e [<ffffffff8024362b>] sock_aio_write+0x51/0x60 [<ffffffff80242efe>] try_to_wake_up+0x3e2/0x3f3 [<ffffffff80214323>] sys_select+0x26f/0x3d6 [<ffffffff80388aa0>] sys_sendto+0x119/0x14c [<ffffffff80257b16>] system_call+0x7e/0x83
[6.] A small shell script or example program which triggers the problem (if possible)
-
[7.] Environment
Homebrew Server (Asus P5WDG2-WS Motherboard).
[7.1.] Software (add the output of the ver_linux script here)
Linux endeavour 2.6.18.8 #6 SMP Sun Aug 5 15:09:57 CEST 2007 x86_64 x86_64 x86_6 4 GNU/Linux
Gnu C 4.1.2 Gnu make 3.81 binutils 2.17.50.0.5 util-linux 2.12r mount 2.12r module-init-tools 3.2.2 e2fsprogs 1.39 jfsutils 1.1.11 reiserfsprogs 3.6.19 xfsprogs 2.8.11 PPP 2.4.4 Linux C Library > libc.2.5 Dynamic linker (ldd) 2.5 Procps 3.2.7 Net-tools 1.60 Kbd 1.12 Sh-utils 6.4 udev 103 Modules Loaded capability commoncap sky2 nfs lockd nfs_acl sunrpc iptabl e_filter ip_tables x_tables nls_utf8 af_packet w83627ehf hwmon i2c_isa eeprom i2 c_dev joydev st sd_mod ide_cd truecrypt nls_iso8859_1 nls_cp437 vfat fat vmnet v mmon ipv6 button battery ac sg sr_mod cdrom loop usb_storage scsi_mod dm_mod i2c _i801 shpchp pci_hotplug ehci_hcd uhci_hcd i2c_core usbcore floppy parport_pc lp parport ext3 mbcache jbd edd fan piix thermal processor ide_disk ide_core
[7.2.] Processor information (from /proc/cpuinfo):
processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 6 model name : Intel(R) Pentium(R) D CPU 3.60GHz stepping : 4 cpu MHz : 3612.869 cache size : 2048 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 fpu : yes fpu_exception : yes cpuid level : 6 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall lm constant_tsc pni monitor ds_cpl vmx est cid cx16 xtpr lahf_lm bogomips : 7231.81 clflush size : 64 cache_alignment : 128 address sizes : 36 bits physical, 48 bits virtual
[7.3.] Module information (from /proc/modules):
capability 22536 0 - Live 0xffffffff88435000 commoncap 25472 1 capability, Live 0xffffffff8842d000 sky2 61444 0 - Live 0xffffffff8811b000 nfs 275768 0 - Live 0xffffffff883e8000 lockd 86800 1 nfs, Live 0xffffffff883d1000 nfs_acl 20608 1 nfs, Live 0xffffffff883ca000 sunrpc 193224 3 nfs,lockd,nfs_acl, Live 0xffffffff88399000 iptable_filter 20096 0 - Live 0xffffffff88393000 ip_tables 39656 1 iptable_filter, Live 0xffffffff88388000 x_tables 35336 1 ip_tables, Live 0xffffffff8837e000 nls_utf8 19072 0 - Live 0xffffffff88378000 af_packet 57356 0 - Live 0xffffffff88368000 w83627ehf 33548 0 - Live 0xffffffff8835e000 hwmon 20488 1 w83627ehf, Live 0xffffffff88357000 i2c_isa 23040 1 w83627ehf, Live 0xffffffff88350000 eeprom 24976 0 - Live 0xffffffff88348000 i2c_dev 28168 0 - Live 0xffffffff88340000 joydev 28160 0 - Live 0xffffffff88338000 st 57764 0 - Live 0xffffffff88328000 sd_mod 39296 0 - Live 0xffffffff8831d000 ide_cd 59552 0 - Live 0xffffffff8830d000 truecrypt 173088 1 - Live 0xffffffff882c0000 nls_iso8859_1 22144 1 - Live 0xffffffff88306000 nls_cp437 23808 1 - Live 0xffffffff882ff000 vfat 31104 1 - Live 0xffffffff88220000 fat 73008 1 vfat, Live 0xffffffff882ec000 vmnet 76976 21 - Live 0xffffffff882ac000 vmmon 166252 28 - Live 0xffffffff88282000 ipv6 358496 77 - Live 0xffffffff88229000 button 24736 0 - Live 0xffffffff88218000 battery 28168 0 - Live 0xffffffff88210000 ac 22792 0 - Live 0xffffffff88209000 sg 54952 0 - Live 0xffffffff881fa000 sr_mod 34724 0 - Live 0xffffffff881f0000 cdrom 54056 2 ide_cd,sr_mod, Live 0xffffffff881e1000 loop 33296 0 - Live 0xffffffff881d7000 usb_storage 105664 0 - Live 0xffffffff881bc000 scsi_mod 174128 5 st,sd_mod,sg,sr_mod,usb_storage, Live 0xffffffff88190000 dm_mod 81872 3 truecrypt, Live 0xffffffff8817b000 i2c_i801 25364 0 - Live 0xffffffff88173000 shpchp 56748 0 - Live 0xffffffff88162000 pci_hotplug 52356 1 shpchp, Live 0xffffffff88154000 ehci_hcd 51080 0 - Live 0xffffffff88144000 uhci_hcd 42520 0 - Live 0xffffffff88138000 i2c_core 41472 5 w83627ehf,i2c_isa,eeprom,i2c_dev,i2c_i801, Live 0xffffffff8812c000 usbcore 163240 4 usb_storage,ehci_hcd,uhci_hcd, Live 0xffffffff880f2000 floppy 82344 0 - Live 0xffffffff880dc000 parport_pc 58984 1 - Live 0xffffffff880cc000 lp 30664 0 - Live 0xffffffff880c1000 parport 59788 2 parport_pc,lp, Live 0xffffffff880b1000 ext3 163856 1 - Live 0xffffffff88087000 mbcache 27016 1 ext3, Live 0xffffffff8807f000 jbd 91000 1 ext3, Live 0xffffffff88067000 edd 27912 0 - Live 0xffffffff8805f000 fan 22408 0 - Live 0xffffffff88058000 piix 28164 0 [permanent], Live 0xffffffff88050000 thermal 33552 0 - Live 0xffffffff88046000 processor 54120 1 thermal, Live 0xffffffff88037000 ide_disk 34304 4 - Live 0xffffffff8802d000 ide_core 171136 4 ide_cd,usb_storage,piix,ide_disk, Live 0xffffffff88002000 [7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
0000-001f : dma1 0020-0021 : pic1 0040-0043 : timer0 0050-0053 : timer1 0060-006f : keyboard 0070-0077 : rtc 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 01f0-01f7 : ide0 0295-0296 : w83627ehf 0378-037a : parport0 037b-037f : parport0 03c0-03df : vga+ 03f2-03f5 : floppy 03f6-03f6 : ide0 03f7-03f7 : floppy DIR 03f8-03ff : serial 0400-041f : 0000:00:1f.3 0400-041f : i801_smbus 0800-0803 : ACPI PM1a_EVT_BLK 0804-0805 : ACPI PM1a_CNT_BLK 0808-080b : ACPI PM_TMR 0810-0815 : ACPI CPU throttle 0820-0820 : ACPI PM2_CNT_BLK 0828-082f : ACPI GPE0_BLK 0cf8-0cff : PCI conf1 b000-bfff : PCI Bus #01 b800-b8ff : 0000:01:00.0 c000-cfff : PCI Bus #02 c800-c8ff : 0000:02:00.0 c800-c8ff : sky2 d880-d88f : 0000:00:1f.2 dc00-dc03 : 0000:00:1f.2 e000-e007 : 0000:00:1f.2 e080-e083 : 0000:00:1f.2 e400-e407 : 0000:00:1f.2 e480-e49f : 0000:00:1d.0 e480-e49f : uhci_hcd e800-e81f : 0000:00:1d.1 e800-e81f : uhci_hcd e880-e89f : 0000:00:1d.2 e880-e89f : uhci_hcd ec00-ec1f : 0000:00:1d.3 ec00-ec1f : uhci_hcd ffa0-ffaf : 0000:00:1f.1 ffa0-ffa7 : ide0 ffa8-ffaf : ide1 00000000-0009fbff : System RAM 00000000-00000000 : Crash kernel 0009fc00-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000f0000-000fffff : System ROM 00100000-7ff7ffff : System RAM 00200000-003d71c7 : Kernel code 003d71c8-00513607 : Kernel data 7ff80000-7ff8dfff : ACPI Tables 7ff8e000-7ffdffff : ACPI Non-volatile Storage 7ffe0000-7fffffff : reserved 88000000-880fffff : PCI Bus #01 88000000-8800ffff : 0000:01:00.0 fc900000-fe9fffff : PCI Bus #01 fd000000-fdffffff : 0000:01:00.0 fea00000-feafffff : PCI Bus #02 feac0000-feadffff : 0000:02:00.0 feafc000-feafffff : 0000:02:00.0 feafc000-feafffff : sky2 febff800-febffbff : 0000:00:1f.2 febffc00-febfffff : 0000:00:1d.7 febffc00-febfffff : ehci_hcd ff800000-ff8fffff : PCI Bus #03 ff900000-ff9fffff : PCI Bus #05 ffb00000-ffffffff : reserved [7.5.] PCI information ('lspci -vvv' as root)
00:00.0 Host bridge: Intel Corporation 82975X Memory Controller Hub (rev c0) Subsystem: ASUSTeK Computer Inc. Unknown device 8178 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Capabilities: [e0] Vendor Specific Information
00:01.0 PCI bridge: Intel Corporation 82975X PCI Express Root Port (rev c0) (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 16 bytes Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000ff900000-00000000ff9fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [88] Subsystem: Intel Corporation Unknown device 0000 Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee00000 Data: 40b9 Capabilities: [a0] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 2 Link: Latency L0s <1us, L1 <4us Link: ASPM Disabled RCB 64 bytes Disabled CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x0 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- Slot: Number 0, PowerLimit 0.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Off, PwrInd On, Power- Root: Correctable- Non-Fatal- Fatal- PME- 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 16 bytes Bus: primary=00, secondary=03, subordinate=04, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000ff800000-00000000ff8fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [40] Express Root Port (Slot-) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s unlimited, L1 unlimited Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 256 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 1 Link: Latency L0s <1us, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x4 Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee00000 Data: 40c1 Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Unknown device 8179 Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:1c.4 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 5 (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 16 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fea00000-feafffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [40] Express Root Port (Slot-) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s unlimited, L1 unlimited Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 5 Link: Latency L0s <256ns, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x1 Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee00000 Data: 40c9 Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Unknown device 8179 Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Unknown device 8179 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 225 Region 4: I/O ports at e480 [size=32]
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Unknown device 8179 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 233 Region 4: I/O ports at e800 [size=32]
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Unknown device 8179 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin C routed to IRQ 50 Region 4: I/O ports at e880 [size=32]
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Unknown device 8179 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin D routed to IRQ 58 Region 4: I/O ports at ec00 [size=32]
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Unknown device 8179 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 225 Region 0: Memory at febffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fc900000-fe9fffff Prefetchable memory behind bridge: 0000000088000000-00000000880fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- Capabilities: [50] Subsystem: ASUSTeK Computer Inc. Unknown device 8179 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) Subsystem: ASUSTeK Computer Inc. Unknown device 8179 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: [e0] Vendor Specific Information
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) (prog-if 8a [Master SecP PriP]) Subsystem: ASUSTeK Computer Inc. Unknown device 8179 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 209 Region 0: I/O ports at <unassigned> Region 1: I/O ports at <unassigned> Region 2: I/O ports at <unassigned> Region 3: I/O ports at <unassigned> Region 4: I/O ports at ffa0 [size=16]
00:1f.2 SATA controller: Intel Corporation 82801GR/GH (ICH7 Family) Serial ATA Storage Controller AHCI (rev 01) (prog-if 01 [AHCI 1.0]) Subsystem: ASUSTeK Computer Inc. Unknown device 2606 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 11 Region 0: I/O ports at e400 [size=8] Region 1: I/O ports at e080 [size=4] Region 2: I/O ports at e000 [size=8] Region 3: I/O ports at dc00 [size=4] Region 4: I/O ports at d880 [size=16] Region 5: Memory at febff800 (32-bit, non-prefetchable) [size=1K] Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [70] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) Subsystem: ASUSTeK Computer Inc. Unknown device 8179 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 66 Region 4: I/O ports at 0400 [size=32]
01:00.0 VGA compatible controller: ATI Technologies Inc 264VT [Mach64 VT] (rev 40) (prog-if 00 [VGA]) Subsystem: ATI Technologies Inc Mach64VT Reference Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping+ SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Region 1: I/O ports at b800 [size=256] Expansion ROM at 88000000 [disabled] [size=64K] 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8062 PCI-E IPMI Gigabit Ethernet Controller (rev 14) Subsystem: ASUSTeK Computer Inc. Unknown device 81da Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 16 bytes Interrupt: pin A routed to IRQ 217 Region 0: Memory at feafc000 (64-bit, non-prefetchable) [size=16K] Region 2: I/O ports at c800 [size=256] Expansion ROM at feac0000 [disabled] [size=128K] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME- Capabilities: [50] Vital Product Data Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+ Address: 00000000fee00000 Data: 40d9 Capabilities: [e0] Express Legacy Endpoint IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s unlimited, L1 unlimited Device: AtnBtn- AtnInd- PwrInd- Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr+ NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 512 bytes Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s, Port 0 Link: Latency L0s <256ns, L1 unlimited Link: ASPM Disabled RCB 128 bytes CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x1 03:00.0 PCI bridge: Intel Corporation 6702PXH PCI Express-to-PCI Bridge A (rev 09) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 16 bytes Bus: primary=03, secondary=04, subordinate=04, sec-latency=64 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [44] Express PCI/PCI-X Bridge IRQ 0 Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: AtnBtn- AtnInd- PwrInd- Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 512 bytes Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0 Link: Latency L0s unlimited, L1 unlimited Link: ASPM Disabled CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x4 Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [6c] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [d8] PCI-X bridge device Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz Status: Dev=03:00.0 64bit- 133MHz- SCD- USC- SCO- SRD- Upstream: Capacity=65535 CommitmentLimit=65535 Downstream: Capacity=65535 CommitmentLimit=65535 [7.6.] SCSI information (from /proc/scsi/scsi)
Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: PLEXTOR Model: DVDR PX-716A Rev: 1.09 Type: CD-ROM ANSI SCSI revision: 02
[7.7.] Other information that might be relevant to the problem (please look in /proc and include all information that you think to be relevant):
filename: /lib/modules/2.6.18.8/kernel/drivers/net/sky2.ko description: Marvell Yukon 2 Gigabit Ethernet driver author: Stephen Hemminger <shemminger@osdl.org> license: GPL version: 1.5 vermagic: 2.6.18.8 SMP mod_unload gcc-4.1 depends: alias: pci:v00001148d00009000sv*sd*bc*sc*i* alias: pci:v00001148d00009E00sv*sd*bc*sc*i* alias: pci:v00001186d00004B00sv*sd*bc*sc*i* alias: pci:v00001186d00004001sv*sd*bc*sc*i* alias: pci:v000011ABd00004340sv*sd*bc*sc*i* alias: pci:v000011ABd00004341sv*sd*bc*sc*i* alias: pci:v000011ABd00004342sv*sd*bc*sc*i* alias: pci:v000011ABd00004343sv*sd*bc*sc*i* alias: pci:v000011ABd00004344sv*sd*bc*sc*i* alias: pci:v000011ABd00004345sv*sd*bc*sc*i* alias: pci:v000011ABd00004346sv*sd*bc*sc*i* alias: pci:v000011ABd00004347sv*sd*bc*sc*i* alias: pci:v000011ABd00004350sv*sd*bc*sc*i* alias: pci:v000011ABd00004351sv*sd*bc*sc*i* alias: pci:v000011ABd00004352sv*sd*bc*sc*i* alias: pci:v000011ABd00004353sv*sd*bc*sc*i* alias: pci:v000011ABd00004360sv*sd*bc*sc*i* alias: pci:v000011ABd00004361sv*sd*bc*sc*i* alias: pci:v000011ABd00004362sv*sd*bc*sc*i* alias: pci:v000011ABd00004363sv*sd*bc*sc*i* alias: pci:v000011ABd00004364sv*sd*bc*sc*i* alias: pci:v000011ABd00004365sv*sd*bc*sc*i* alias: pci:v000011ABd00004366sv*sd*bc*sc*i* alias: pci:v000011ABd00004367sv*sd*bc*sc*i* alias: pci:v000011ABd00004368sv*sd*bc*sc*i* alias: pci:v000011ABd00004369sv*sd*bc*sc*i* srcversion: B7CB0B95067486ED1B6EEEB parm: idle_timeout:Idle timeout workaround for lost interrupts (ms) (int) parm: disable_msi:Disable Message Signaled Interrupt (MSI) (int) parm: copybreak:Receive copy threshold (int) parm: debug:Debug level (0=none,...,16=all) (int)
[X.] Other notes, patches, fixes, workarounds:
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
|  |