lkml.org 
[lkml]   [2007]   [Sep]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: ramdisk
Date
From

On Mon, 3 Sep 2007, Xu Yang wrote:

> Hi everyone,
>
> I want to use ramdisk to boot my filesystem, as I can't use NFS and harddisk.
>
> I have load the ramdisk into the ram memory (start address :0x4000000)
>
> and in the boot options I specified : root =dev/ram0 initrd=0x4000000

Since you don't know what the default directory is, perhaps
root should be /dev/ram0. Also, make sure you actually create
those device nodes in /dev

[Snipped...]

> but the kernel said it can not find any file system on it.
>
> regards,
>
> Yang
>

Cheers,
Dick Johnson
Penguin : Linux version 2.6.22.1 on an i686 machine (5588.30 BogoMips).
My book : http://www.AbominableFirebug.com/
_


****************************************************************
The information transmitted in this message is confidential and may be privileged. Any review, retransmission, dissemination, or other use of this information by persons or entities other than the intended recipient is prohibited. If you are not the intended recipient, please notify Analogic Corporation immediately - by replying to this message or by sending an email to DeliveryErrors@analogic.com - and destroy all copies of this information, including any attachments, without reading or disclosing them.

Thank you.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-09-04 17:09    [W:0.099 / U:0.456 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site