Messages in this thread | | | Date | Wed, 26 Sep 2007 22:26:43 +0200 | From | "Torsten Kaiser" <> | Subject | sata_sil24 broken since 2.6.23-rc4-mm1 |
| |
As reported in the "2.6.23-rc4-mm1"-thread and the "What's in linux-2.6-block.git for 2.6.24"-thread I'm having trouble that sometimes on bootup one drive from the SiI-3132 throws errors and becomes inaccesible.
The latest kernel I have seen this error was 2.6.23-rc7-mm1. From 7 boots 2 times the following happend:
Sep 25 07:42:11 treogen [ 33.810000] md1: bitmap initialized from disk: read 10/10 pages, set 0 bits Sep 25 07:42:11 treogen [ 33.810000] created bitmap (145 pages) for device md1 Sep 25 07:42:11 treogen [ 63.910000] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen Sep 25 07:42:11 treogen [ 63.910000] ata1.00: cmd 61/08:00:09:d6:42/00:00:25:00:00/40 tag 0 cdb 0x0 data 4096 out Sep 25 07:42:11 treogen [ 63.910000] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) Sep 25 07:42:11 treogen [ 63.910000] ata1.00: status: {DRDY } Sep 25 07:42:11 treogen [ 63.910000] ata1: hard resetting link Sep 25 07:42:11 treogen [ 66.210000] ata1: softreset failed (port not ready) Sep 25 07:42:11 treogen [ 66.210000] ata1: reset failed (errno=-5), retrying in 8 secs Sep 25 07:42:11 treogen [ 73.910000] ata1: hard resetting link Sep 25 07:42:11 treogen [ 76.210000] ata1: softreset failed (port not ready) Sep 25 07:42:11 treogen [ 76.210000] ata1: reset failed (errno=-5), retrying in 8 secs Sep 25 07:42:11 treogen [ 83.910000] ata1: hard resetting link Sep 25 07:42:11 treogen [ 86.210000] ata1: softreset failed (port not ready) Sep 25 07:42:11 treogen [ 86.210000] ata1: reset failed (errno=-5), retrying in 33 secs Sep 25 07:42:11 treogen [ 118.910000] ata1: limiting SATA link speed to 1.5 Gbps Sep 25 07:42:11 treogen [ 118.910000] ata1: hard resetting link Sep 25 07:42:11 treogen [ 121.210000] ata1: softreset failed (port not ready) Sep 25 07:42:11 treogen [ 121.210000] ata1: reset failed, giving up Sep 25 07:42:11 treogen [ 121.210000] ata1.00: disabled Sep 25 07:42:11 treogen [ 121.210000] ata1: EH complete Sep 25 07:42:11 treogen [ 121.210000] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK Sep 25 07:42:11 treogen [ 121.210000] end_request: I/O error, dev sda, sector 625137161 Sep 25 07:42:11 treogen [ 121.210000] md: super_written gets error=-5, uptodate=0 Sep 25 07:42:11 treogen [ 121.210000] raid5: Disk failure on sda2, disabling device. Operation continuing on 2 devices
Comparing the driver/ata directory from rc3-mm1 and rc4-mm1 the following change looked the most suspicions to me: http://git.kernel.org/?p=linux/kernel/git/jgarzik/libata-dev.git;a=blobdiff;f=drivers/ata/sata_sil24.c;h=3dcb223117be9739ee04d70b6bfc776a4b839a3f;hp=e0cd31aa8002350add53ba6ff07493e503275244;hb=020bc1bd8d369a77bd9379cd9763ac0057651753;hpb=8d4bdf8087e682df98bdb856f6ad451bf6d597e7
That after rc4-mm1 the sata_sil24.c did not change anymore also matches the occurrence of the error.
To confirm my theorie I exchanged the sata_sil24.c from rc8-mm1 with the version from rc3-mm1. I was able to boot the resulting kernel successfully 5 times, without the error happening again.
Torsten - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |