lkml.org 
[lkml]   [2007]   [Sep]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [Sparc64 BUG] hangup under booting 2.6.22.X whith Sparc64
2007/9/10, David Miller <davem@davemloft.net>:
> From: "Kövedi_Krisztián" <kovedi@gmail.com>
> Date: Mon, 10 Sep 2007 13:42:43 +0200
>
> > Executing last command: boot
> > Boot device: /pci@1f,0/ide@d/disk@0,0:a File and args:
> > SILO Version 1.4.13
> > boot: teszt
> > Allocated 8 Megs of memory at 0x40000000 for kernel
> > Loaded kernel version 2.6.22
> >
> > Remapping the kernel... done.
> > Booting Linux...
>
> Please add "-p" to the boot command line so we can see
> if any other useful messages are printed by the kernel.
>
> There is a period between this last message and the
> console initialization, which can be quite long and the
> "-p" option forces all messages to be printed via the
> firmware.
>

thanks, we find one kernel panic under initailizin the pci deveces

hier is the dmesg with -p:

###################
Sun Fire V100 (UltraSPARC-IIe 648MHz), No Keyboard
OpenBoot 4.0, 1024 MB memory installed, Serial #53829668.
Ethernet address 0:3:ba:35:60:24, Host ID: 83356024.



Executing last command: boot
Boot device: /pci@1f,0/ide@d/disk@0,0:a File and args:
SILO Version 1.4.13
boot: teszt -p
Allocated 8 Megs of memory
Loaded kernel version 2.6.22

[ 0.000000] PROMLIB: Sun IEEE Boot Prom 'OBP 4.0.18 2002/05/23
18:22'
[ 0.000000] PROMLIB: Root node compatible: sun4u
[ 0.000000] Linux version 2.6.22.6 (root@www) (gcc version 4.1.1
(Gentoo 4.1.
1)) #2 Mon Sep 10 09:14:17 CEST 2007
[ 0.000000] ARCH: SUN4U
[ 0.000000] Ethernet address: 00:03:ba:35:60:24
Remapping the kernel... done.
[ 0.000000] PROM: Built device tree with 45240 bytes of memory.
Booting Linux...
[ 0.000000] Built 1 zonelists. Total pages: 12723
[ 0.000000] Kernel command line: root=/dev/md1 ro
md=1,/dev/hda2,/dev/hdc2 id
e=nodma -p
[ 0.000000] md: Will configure md1 (super-block) from
/dev/hda2,/dev/hdc2, be
low.
[ 0.000000] ide_setup: ide=nodma : Prevented DMA
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 47.328995] clocksource: mult[b40001] shift[16]
[ 47.382760] clockevent: mult[16c16bf] shift[32]
[ 47.437635] Console: colour dummy device 80x25
[ 47.495580] Dentry cache hash table entries: 131072 (order: 7,

[ 47.588109] Inode-cache hash table entries: 65536 (order: 6, 524288
bytes)
[ 47.730785] Memory: 1026136k available (2496k kernel code, 848k
data, 128k in
it) [fffff80000000000,00000000dfec8000]
[ 48.005810] Calibrating delay using timer specific routine.. 11.12
BogoMIPS (
lpj=55615)
[ 48.100809] Mount-cache hash table entries: 512
[ 48.156265] NET: Registered protocol family 16
[ 48.217211] PCI: Probing for controllers.
[ 48.267219] /pci@1f,0: SABRE PCI Bus Module
[ 48.316321] /pci@1f,0: PCI IO
[ 48.382804] PCI: Scanning PBM /pci@1f,0
[ 48.429059] PCI quirk: region 2000-203f claimed by ali7101 ACPI
[ 48.499146] PCI quirk: region 4000-401f claimed by ali7101 SMB
[ 48.569859] kobject_add failed for 0000:00:03.0 with -EEXIST, don't
try to re
gister things with the same name in the same directory.
[ 48.711319] Call Trace:
[ 48.740395] [0000000000578374] device_add+0x88/0x518
[ 48.800670] [0000000000550830] pci_bus_add_device+0x10/0x6c
[ 48.868208] [00000000005508ac] pci_bus_add_devices+
[ 48.937827] [0000000000434a64] pci_scan_one_pbm+0xa4/0xb4
[ 49.003288] [000000000043d1e4] sabre_scan_bus+0x54/0x270
[ 49.067712] [0000000000755d28] pcibios_init+0x64/0x90
[ 49.129014] [00000000007501f0] kernel_init+0xc0/0x260
[ 49.190319] [00000000004277f8] kernel_thread+0x38/0x48
[ 49.252663] [000000000066f4d8] rest_init+0x18/0x50
[ 49.310852] pci 0000:00:03.0: Error adding device, continuing
[ 49.380101] kernel BUG at drivers/pci/bus.c:127!
[ 49.434512] \|/ ____ \|/
[ 49.434518] "@'/ .. \`@"
[ 49.434524] /_| \__/ |_\
[ 49.434529] \__U_/
[ 49.610113] swapper(1): Kernel bad sw trap 5 [#1]
[ 49.666218] TSTATE: 0000000080001600 TPC: 0000000000550924 TNPC:
000000000055
0928 Y: 00000000 Not tainted
[ 49.783631] TPC: <pci_bus_add_devices+0x98/0x14c>
[ 49.839738] g0: 00000000007289f0 g1: 0000000000000001 g2:
0000000000715000 g3
: 00000000007152b0
[ 49.943647] g4: fffff800dfe9f9e0 g5: 0000000000000000 g6:
fffff800defc00
: 0000000000000000
[ 50.047551] o0: 0000000000000037 o1: 00000000006d3310 o2: 000000000000007f o3
: fffff800defcb380
[ 50.151458] o4: 0000000000000101 o5: 0000000000000000 sp: fffff800defc32a1 re
t_pc: 000000000055091c
[ 50.259521] RPC: <pci_bus_add_devices+0x90/0x14c>
[ 50.315635] l0: fffff800dfec2498 l1: fffff800dfec24a8 l2: fffff800dfea8a60 l3
: 000000000071e000
[ 50.419536] l4: fffff800def3f000 l5: 0000000000000000 l6: 0000000000000000 l7
: 0000000000000008
[ 50.523447] i0: fffff800def3d000 i1: fffff80080e0de80 i2: fffff800dfec2480 i3
: 0000000000000000
[ 50.627350] i4: 0000000000000001 i5: 0000000000728518 i6: fffff800defc3361 i7
: 0000000000434a64
[ 50.731257] I7: <pci_scan_one_pbm+0xa4/0xb4>
[ 50.782168] Caller[0000000000434a64]: pci_scan_one_pbm+0xa4/0xb4
[ 50.853852] Caller[000000000043d1e4]: sabre_scan_bus+0x54/0x270
[ 50.924508] Caller[0000000000755d28]: pcibios_init+0x64/0x90
[ 50.992048] Caller[00000000007501f0]: kernel_init+0xc0/0x260
[ 51.059586] Caller[00000000004277f8]: kernel_thread+0x38/0x48
[ 51.128166] Caller[000000000066f4d8]: rest_init+0x18/0x50
[ 51.192586] Instruction DUMP: 9210207f 7ffb66c3 90122310 <91d02005> 22c0802
5 c25e2010 c2588000 80a04002 1268000e
[ 51.321433] Kernel panic - not syncing: Attempted to kill init!
[ 51.392101] Press Stop-A (L1-A) to return to the boot prom



Thanks,
Krisz
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-09-11 07:35    [W:0.070 / U:0.688 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site