lkml.org 
[lkml]   [2007]   [Sep]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: 2.6.23-rc4-mm1 OOPS in forcedeth?
    From: Andrew Morton <akpm@linux-foundation.org>
    Date: Fri, Aug 31, 2007 at 09:58:22PM -0700
    >
    > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23-rc4/2.6.23-rc4-mm1/
    >
    On this machine (Athlon 64 X2 4600, 4 GiB memory, lots of disks),
    2.6.23-rc1-mm2 runs fine. 2.6.23-rc4-mm1 reproducably dies within seconds of starting
    a rsync session on another PC against this machine.

    NULL pointer dereference
    code: nv_napi_poll+0x108
    trace: net_rx_action+0xab
    __do_softirq+0x74
    call_softirq+0x1c
    do_softirq+0x3d
    irq_exit+0x85
    do_IRQ+0x85
    ret_from_intr+0x0

    .config and dmesg output below.

    Kind regards,
    Jurriaan

    #
    # Automatically generated make config: don't edit
    # Linux kernel version: 2.6.23-rc4-mm1
    # Sat Sep 1 08:20:54 2007
    #
    CONFIG_X86_64=y
    CONFIG_64BIT=y
    CONFIG_X86=y
    CONFIG_GENERIC_TIME=y
    CONFIG_GENERIC_CLOCKEVENTS=y
    CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
    CONFIG_NONIRQ_WAKEUP=y
    CONFIG_GENERIC_TIME_VSYSCALL=y
    CONFIG_GENERIC_CMOS_UPDATE=y
    CONFIG_ZONE_DMA32=y
    CONFIG_LOCKDEP_SUPPORT=y
    CONFIG_STACKTRACE_SUPPORT=y
    CONFIG_SEMAPHORE_SLEEPERS=y
    CONFIG_MMU=y
    CONFIG_ZONE_DMA=y
    CONFIG_QUICKLIST=y
    CONFIG_NR_QUICK=2
    CONFIG_RWSEM_GENERIC_SPINLOCK=y
    CONFIG_GENERIC_HWEIGHT=y
    CONFIG_GENERIC_CALIBRATE_DELAY=y
    CONFIG_X86_CMPXCHG=y
    CONFIG_EARLY_PRINTK=y
    CONFIG_GENERIC_ISA_DMA=y
    CONFIG_GENERIC_IOMAP=y
    CONFIG_ARCH_MAY_HAVE_PC_FDC=y
    CONFIG_ARCH_POPULATES_NODE_MAP=y
    CONFIG_DMI=y
    CONFIG_AUDIT_ARCH=y
    CONFIG_GENERIC_BUG=y
    # CONFIG_ARCH_HAS_ILOG2_U32 is not set
    # CONFIG_ARCH_HAS_ILOG2_U64 is not set
    CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

    #
    # General setup
    #
    CONFIG_EXPERIMENTAL=y
    CONFIG_LOCK_KERNEL=y
    CONFIG_INIT_ENV_ARG_LIMIT=32
    CONFIG_LOCALVERSION=""
    CONFIG_LOCALVERSION_AUTO=y
    CONFIG_SWAP=y
    CONFIG_SYSVIPC=y
    CONFIG_SYSVIPC_SYSCTL=y
    CONFIG_POSIX_MQUEUE=y
    CONFIG_BSD_PROCESS_ACCT=y
    # CONFIG_BSD_PROCESS_ACCT_V3 is not set
    # CONFIG_TASKSTATS is not set
    # CONFIG_USER_NS is not set
    # CONFIG_AUDIT is not set
    CONFIG_IKCONFIG=y
    CONFIG_IKCONFIG_PROC=y
    CONFIG_LOG_BUF_SHIFT=18
    # CONFIG_CONTAINERS is not set
    CONFIG_SYSFS_DEPRECATED=y
    # CONFIG_RELAY is not set
    # CONFIG_BLK_DEV_INITRD is not set
    # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
    CONFIG_SYSCTL=y
    # CONFIG_EMBEDDED is not set
    CONFIG_SYSCTL_SYSCALL=y
    CONFIG_KALLSYMS=y
    # CONFIG_KALLSYMS_ALL is not set
    # CONFIG_KALLSYMS_EXTRA_PASS is not set
    CONFIG_HOTPLUG=y
    CONFIG_PRINTK=y
    CONFIG_BUG=y
    CONFIG_ELF_CORE=y
    CONFIG_BASE_FULL=y
    CONFIG_FUTEX=y
    CONFIG_ANON_INODES=y
    CONFIG_EPOLL=y
    CONFIG_SIGNALFD=y
    CONFIG_TIMERFD=y
    CONFIG_EVENTFD=y
    CONFIG_SHMEM=y
    CONFIG_VM_EVENT_COUNTERS=y
    CONFIG_SLAB=y
    # CONFIG_SLUB is not set
    # CONFIG_SLOB is not set
    CONFIG_PROC_PAGE_MONITOR=y
    CONFIG_PROC_KPAGEMAP=y
    CONFIG_RT_MUTEXES=y
    # CONFIG_TINY_SHMEM is not set
    CONFIG_BASE_SMALL=0
    CONFIG_MODULES=y
    CONFIG_MODULE_UNLOAD=y
    CONFIG_MODULE_FORCE_UNLOAD=y
    # CONFIG_MODVERSIONS is not set
    # CONFIG_MODULE_SRCVERSION_ALL is not set
    CONFIG_KMOD=y
    CONFIG_STOP_MACHINE=y
    CONFIG_BLOCK=y
    # CONFIG_BLK_DEV_IO_TRACE is not set
    # CONFIG_BLK_DEV_BSG is not set

    #
    # IO Schedulers
    #
    CONFIG_IOSCHED_NOOP=y
    CONFIG_IOSCHED_AS=y
    CONFIG_IOSCHED_DEADLINE=y
    CONFIG_IOSCHED_CFQ=y
    CONFIG_DEFAULT_AS=y
    # CONFIG_DEFAULT_DEADLINE is not set
    # CONFIG_DEFAULT_CFQ is not set
    # CONFIG_DEFAULT_NOOP is not set
    CONFIG_DEFAULT_IOSCHED="anticipatory"

    #
    # Processor type and features
    #
    CONFIG_TICK_ONESHOT=y
    CONFIG_NO_HZ=y
    CONFIG_HIGH_RES_TIMERS=y
    CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
    CONFIG_X86_PC=y
    # CONFIG_X86_VSMP is not set
    CONFIG_MK8=y
    # CONFIG_MPSC is not set
    # CONFIG_MCORE2 is not set
    # CONFIG_GENERIC_CPU is not set
    CONFIG_X86_L1_CACHE_BYTES=64
    CONFIG_X86_L1_CACHE_SHIFT=6
    CONFIG_X86_INTERNODE_CACHE_BYTES=64
    CONFIG_X86_TSC=y
    CONFIG_X86_GOOD_APIC=y
    # CONFIG_MICROCODE is not set
    CONFIG_X86_MSR=y
    CONFIG_X86_CPUID=y
    CONFIG_X86_IO_APIC=y
    CONFIG_X86_LOCAL_APIC=y
    CONFIG_MTRR=y
    CONFIG_SMP=y
    # CONFIG_SCHED_SMT is not set
    CONFIG_SCHED_MC=y
    # CONFIG_PREEMPT_NONE is not set
    CONFIG_PREEMPT_VOLUNTARY=y
    # CONFIG_PREEMPT is not set
    CONFIG_PREEMPT_BKL=y
    # CONFIG_NUMA is not set
    CONFIG_ARCH_SPARSEMEM_ENABLE=y
    CONFIG_ARCH_FLATMEM_ENABLE=y
    CONFIG_SELECT_MEMORY_MODEL=y
    CONFIG_FLATMEM_MANUAL=y
    # CONFIG_DISCONTIGMEM_MANUAL is not set
    # CONFIG_SPARSEMEM_MANUAL is not set
    CONFIG_FLATMEM=y
    CONFIG_FLAT_NODE_MEM_MAP=y
    # CONFIG_SPARSEMEM_STATIC is not set
    CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
    CONFIG_SPLIT_PTLOCK_CPUS=4
    CONFIG_RESOURCES_64BIT=y
    CONFIG_ZONE_DMA_FLAG=1
    CONFIG_BOUNCE=y
    CONFIG_VIRT_TO_BUS=y
    CONFIG_NR_CPUS=2
    CONFIG_PHYSICAL_ALIGN=0x200000
    CONFIG_HOTPLUG_CPU=y
    CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
    CONFIG_HPET_TIMER=y
    CONFIG_HPET_EMULATE_RTC=y
    CONFIG_IOMMU=y
    # CONFIG_CALGARY_IOMMU is not set
    CONFIG_SWIOTLB=y
    CONFIG_X86_MCE=y
    # CONFIG_X86_MCE_INTEL is not set
    CONFIG_X86_MCE_AMD=y
    # CONFIG_KEXEC is not set
    # CONFIG_CRASH_DUMP is not set
    # CONFIG_RELOCATABLE is not set
    CONFIG_PHYSICAL_START=0x200000
    CONFIG_SECCOMP=y
    # CONFIG_CC_STACKPROTECTOR is not set
    # CONFIG_HZ_100 is not set
    # CONFIG_HZ_250 is not set
    # CONFIG_HZ_300 is not set
    CONFIG_HZ_1000=y
    CONFIG_HZ=1000
    CONFIG_K8_NB=y
    CONFIG_GENERIC_HARDIRQS=y
    CONFIG_GENERIC_IRQ_PROBE=y
    CONFIG_ISA_DMA_API=y
    CONFIG_GENERIC_PENDING_IRQ=y

    #
    # Power management options
    #
    CONFIG_PM=y
    # CONFIG_PM_LEGACY is not set
    # CONFIG_PM_DEBUG is not set
    CONFIG_PM_SLEEP_SMP=y
    CONFIG_PM_SLEEP=y
    CONFIG_SUSPEND_SMP_POSSIBLE=y
    CONFIG_SUSPEND=y
    CONFIG_HIBERNATION_SMP_POSSIBLE=y
    # CONFIG_HIBERNATION is not set
    CONFIG_ACPI=y
    CONFIG_ACPI_SLEEP=y
    # CONFIG_ACPI_PROCFS is not set
    CONFIG_ACPI_PROC_EVENT=y
    CONFIG_ACPI_AC=y
    # CONFIG_ACPI_BATTERY is not set
    CONFIG_ACPI_BUTTON=y
    CONFIG_ACPI_FAN=y
    # CONFIG_ACPI_DOCK is not set
    CONFIG_ACPI_PROCESSOR=y
    CONFIG_ACPI_HOTPLUG_CPU=y
    CONFIG_ACPI_THERMAL=y
    # CONFIG_ACPI_ASUS is not set
    # CONFIG_ACPI_TOSHIBA is not set
    CONFIG_ACPI_BLACKLIST_YEAR=0
    # CONFIG_ACPI_DEBUG is not set
    CONFIG_ACPI_EC=y
    CONFIG_ACPI_POWER=y
    CONFIG_ACPI_SYSTEM=y
    CONFIG_X86_PM_TIMER=y
    CONFIG_ACPI_CONTAINER=y
    # CONFIG_ACPI_SBS is not set

    #
    # CPU Frequency scaling
    #
    CONFIG_CPU_FREQ=y
    CONFIG_CPU_FREQ_TABLE=y
    # CONFIG_CPU_FREQ_DEBUG is not set
    CONFIG_CPU_FREQ_STAT=y
    # CONFIG_CPU_FREQ_STAT_DETAILS is not set
    # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
    # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
    CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
    # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
    CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
    CONFIG_CPU_FREQ_GOV_POWERSAVE=y
    # CONFIG_CPU_FREQ_GOV_USERSPACE is not set
    CONFIG_CPU_FREQ_GOV_ONDEMAND=y
    # CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set

    #
    # CPUFreq processor drivers
    #
    CONFIG_X86_POWERNOW_K8=y
    CONFIG_X86_POWERNOW_K8_ACPI=y
    # CONFIG_X86_SPEEDSTEP_CENTRINO is not set
    CONFIG_X86_ACPI_CPUFREQ=m

    #
    # shared options
    #
    # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
    # CONFIG_X86_SPEEDSTEP_LIB is not set

    #
    # CPU idle PM support
    #
    CONFIG_CPU_IDLE=y

    #
    # Governors
    #
    CONFIG_CPU_IDLE_GOV_LADDER=y
    CONFIG_CPU_IDLE_GOV_MENU=y

    #
    # Bus options (PCI etc.)
    #
    CONFIG_PCI=y
    CONFIG_PCI_DIRECT=y
    CONFIG_PCI_MMCONFIG=y
    CONFIG_DMAR=y
    CONFIG_DMAR_GFX_WA=y
    CONFIG_DMAR_FLOPPY_WA=y
    CONFIG_PCIEPORTBUS=y
    CONFIG_PCIEAER=y
    CONFIG_ARCH_SUPPORTS_MSI=y
    CONFIG_PCI_MSI=y
    # CONFIG_PCI_DEBUG is not set
    CONFIG_HT_IRQ=y
    # CONFIG_PCCARD is not set
    # CONFIG_HOTPLUG_PCI is not set

    #
    # Executable file formats / Emulations
    #
    CONFIG_BINFMT_ELF=y
    # CONFIG_BINFMT_MISC is not set
    # CONFIG_IA32_EMULATION is not set
    # CONFIG_COMPAT_FOR_U64_ALIGNMENT is not set

    #
    # Networking
    #
    CONFIG_NET=y

    #
    # Networking options
    #
    CONFIG_PACKET=y
    CONFIG_PACKET_MMAP=y
    CONFIG_UNIX=y
    CONFIG_XFRM=y
    # CONFIG_XFRM_USER is not set
    # CONFIG_XFRM_SUB_POLICY is not set
    # CONFIG_XFRM_MIGRATE is not set
    CONFIG_NET_KEY=y
    # CONFIG_NET_KEY_MIGRATE is not set
    CONFIG_INET=y
    CONFIG_IP_MULTICAST=y
    CONFIG_IP_ADVANCED_ROUTER=y
    CONFIG_ASK_IP_FIB_HASH=y
    # CONFIG_IP_FIB_TRIE is not set
    CONFIG_IP_FIB_HASH=y
    # CONFIG_IP_MULTIPLE_TABLES is not set
    # CONFIG_IP_ROUTE_MULTIPATH is not set
    CONFIG_IP_ROUTE_VERBOSE=y
    # CONFIG_IP_PNP is not set
    CONFIG_NET_IPIP=y
    CONFIG_NET_IPGRE=y
    CONFIG_NET_IPGRE_BROADCAST=y
    # CONFIG_IP_MROUTE is not set
    # CONFIG_ARPD is not set
    CONFIG_SYN_COOKIES=y
    CONFIG_INET_AH=y
    CONFIG_INET_ESP=y
    CONFIG_INET_IPCOMP=y
    CONFIG_INET_XFRM_TUNNEL=y
    CONFIG_INET_TUNNEL=y
    CONFIG_INET_XFRM_MODE_TRANSPORT=y
    CONFIG_INET_XFRM_MODE_TUNNEL=y
    CONFIG_INET_XFRM_MODE_BEET=y
    # CONFIG_INET_LRO is not set
    CONFIG_INET_DIAG=y
    CONFIG_INET_TCP_DIAG=y
    # CONFIG_TCP_CONG_ADVANCED is not set
    CONFIG_TCP_CONG_CUBIC=y
    CONFIG_DEFAULT_TCP_CONG="cubic"
    # CONFIG_TCP_MD5SIG is not set
    CONFIG_IP_VS=m
    # CONFIG_IP_VS_DEBUG is not set
    CONFIG_IP_VS_TAB_BITS=12

    #
    # IPVS transport protocol load balancing support
    #
    CONFIG_IP_VS_PROTO_TCP=y
    CONFIG_IP_VS_PROTO_UDP=y
    CONFIG_IP_VS_PROTO_ESP=y
    CONFIG_IP_VS_PROTO_AH=y

    #
    # IPVS scheduler
    #
    CONFIG_IP_VS_RR=m
    CONFIG_IP_VS_WRR=m
    CONFIG_IP_VS_LC=m
    CONFIG_IP_VS_WLC=m
    CONFIG_IP_VS_LBLC=m
    CONFIG_IP_VS_LBLCR=m
    CONFIG_IP_VS_DH=m
    CONFIG_IP_VS_SH=m
    CONFIG_IP_VS_SED=m
    CONFIG_IP_VS_NQ=m

    #
    # IPVS application helper
    #
    CONFIG_IP_VS_FTP=m
    # CONFIG_IPV6 is not set
    # CONFIG_INET6_XFRM_TUNNEL is not set
    # CONFIG_INET6_TUNNEL is not set
    # CONFIG_NETWORK_SECMARK is not set
    CONFIG_NETFILTER=y
    # CONFIG_NETFILTER_DEBUG is not set

    #
    # Core Netfilter Configuration
    #
    # CONFIG_NETFILTER_NETLINK is not set
    CONFIG_NF_CONNTRACK_ENABLED=y
    CONFIG_NF_CONNTRACK=y
    CONFIG_NF_CT_ACCT=y
    CONFIG_NF_CONNTRACK_MARK=y
    CONFIG_NF_CONNTRACK_EVENTS=y
    CONFIG_NF_CT_PROTO_GRE=m
    CONFIG_NF_CT_PROTO_SCTP=m
    CONFIG_NF_CT_PROTO_UDPLITE=m
    CONFIG_NF_CONNTRACK_AMANDA=m
    CONFIG_NF_CONNTRACK_FTP=m
    CONFIG_NF_CONNTRACK_H323=m
    CONFIG_NF_CONNTRACK_IRC=m
    CONFIG_NF_CONNTRACK_NETBIOS_NS=m
    CONFIG_NF_CONNTRACK_PPTP=m
    # CONFIG_NF_CONNTRACK_SANE is not set
    CONFIG_NF_CONNTRACK_SIP=m
    CONFIG_NF_CONNTRACK_TFTP=m
    CONFIG_NETFILTER_XTABLES=m
    CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
    CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
    CONFIG_NETFILTER_XT_TARGET_DSCP=m
    CONFIG_NETFILTER_XT_TARGET_MARK=m
    CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
    CONFIG_NETFILTER_XT_TARGET_NFLOG=m
    CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
    CONFIG_NETFILTER_XT_TARGET_TRACE=m
    # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
    CONFIG_NETFILTER_XT_MATCH_COMMENT=m
    CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
    CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
    CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
    CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
    CONFIG_NETFILTER_XT_MATCH_DCCP=m
    CONFIG_NETFILTER_XT_MATCH_DSCP=m
    CONFIG_NETFILTER_XT_MATCH_ESP=m
    CONFIG_NETFILTER_XT_MATCH_HELPER=m
    CONFIG_NETFILTER_XT_MATCH_LENGTH=m
    CONFIG_NETFILTER_XT_MATCH_LIMIT=m
    CONFIG_NETFILTER_XT_MATCH_MAC=m
    CONFIG_NETFILTER_XT_MATCH_MARK=m
    CONFIG_NETFILTER_XT_MATCH_POLICY=m
    CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
    CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
    CONFIG_NETFILTER_XT_MATCH_QUOTA=m
    CONFIG_NETFILTER_XT_MATCH_REALM=m
    CONFIG_NETFILTER_XT_MATCH_SCTP=m
    CONFIG_NETFILTER_XT_MATCH_STATE=m
    CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
    CONFIG_NETFILTER_XT_MATCH_STRING=m
    CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
    CONFIG_NETFILTER_XT_MATCH_U32=m
    CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m

    #
    # IP: Netfilter Configuration
    #
    CONFIG_NF_CONNTRACK_IPV4=m
    CONFIG_NF_CONNTRACK_PROC_COMPAT=y
    CONFIG_IP_NF_QUEUE=m
    CONFIG_IP_NF_IPTABLES=m
    CONFIG_IP_NF_MATCH_IPRANGE=m
    CONFIG_IP_NF_MATCH_TOS=m
    CONFIG_IP_NF_MATCH_RECENT=m
    CONFIG_IP_NF_MATCH_ECN=m
    CONFIG_IP_NF_MATCH_AH=m
    CONFIG_IP_NF_MATCH_TTL=m
    CONFIG_IP_NF_MATCH_OWNER=m
    CONFIG_IP_NF_MATCH_ADDRTYPE=m
    CONFIG_IP_NF_FILTER=m
    CONFIG_IP_NF_TARGET_REJECT=m
    CONFIG_IP_NF_TARGET_LOG=m
    CONFIG_IP_NF_TARGET_ULOG=m
    CONFIG_NF_NAT=m
    CONFIG_NF_NAT_NEEDED=y
    CONFIG_IP_NF_TARGET_MASQUERADE=m
    CONFIG_IP_NF_TARGET_REDIRECT=m
    CONFIG_IP_NF_TARGET_NETMAP=m
    CONFIG_IP_NF_TARGET_SAME=m
    CONFIG_NF_NAT_SNMP_BASIC=m
    CONFIG_NF_NAT_PROTO_GRE=m
    CONFIG_NF_NAT_FTP=m
    CONFIG_NF_NAT_IRC=m
    CONFIG_NF_NAT_TFTP=m
    CONFIG_NF_NAT_AMANDA=m
    CONFIG_NF_NAT_PPTP=m
    CONFIG_NF_NAT_H323=m
    CONFIG_NF_NAT_SIP=m
    CONFIG_IP_NF_MANGLE=m
    CONFIG_IP_NF_TARGET_TOS=m
    CONFIG_IP_NF_TARGET_ECN=m
    CONFIG_IP_NF_TARGET_TTL=m
    CONFIG_IP_NF_TARGET_CLUSTERIP=m
    CONFIG_IP_NF_RAW=m
    CONFIG_IP_NF_ARPTABLES=m
    CONFIG_IP_NF_ARPFILTER=m
    CONFIG_IP_NF_ARP_MANGLE=m
    # CONFIG_IP_DCCP is not set
    CONFIG_IP_SCTP=m
    # CONFIG_SCTP_DBG_MSG is not set
    # CONFIG_SCTP_DBG_OBJCNT is not set
    # CONFIG_SCTP_HMAC_NONE is not set
    # CONFIG_SCTP_HMAC_SHA1 is not set
    CONFIG_SCTP_HMAC_MD5=y
    # CONFIG_TIPC is not set
    # CONFIG_ATM is not set
    # CONFIG_BRIDGE is not set
    # CONFIG_VLAN_8021Q is not set
    # CONFIG_DECNET is not set
    # CONFIG_LLC2 is not set
    # CONFIG_IPX is not set
    # CONFIG_ATALK is not set
    # CONFIG_X25 is not set
    # CONFIG_LAPB is not set
    # CONFIG_ECONET is not set
    # CONFIG_WAN_ROUTER is not set

    #
    # QoS and/or fair queueing
    #
    CONFIG_NET_SCHED=y
    CONFIG_NET_SCH_FIFO=y

    #
    # Queueing/Scheduling
    #
    CONFIG_NET_SCH_CBQ=m
    CONFIG_NET_SCH_HTB=m
    CONFIG_NET_SCH_HFSC=m
    CONFIG_NET_SCH_PRIO=m
    CONFIG_NET_SCH_RR=m
    CONFIG_NET_SCH_RED=m
    CONFIG_NET_SCH_SFQ=m
    CONFIG_NET_SCH_TEQL=m
    CONFIG_NET_SCH_TBF=m
    CONFIG_NET_SCH_GRED=m
    CONFIG_NET_SCH_DSMARK=m
    CONFIG_NET_SCH_NETEM=m
    CONFIG_NET_SCH_INGRESS=m

    #
    # Classification
    #
    CONFIG_NET_CLS=y
    # CONFIG_NET_CLS_BASIC is not set
    CONFIG_NET_CLS_TCINDEX=m
    CONFIG_NET_CLS_ROUTE4=m
    CONFIG_NET_CLS_ROUTE=y
    CONFIG_NET_CLS_FW=m
    CONFIG_NET_CLS_U32=m
    # CONFIG_CLS_U32_PERF is not set
    # CONFIG_CLS_U32_MARK is not set
    CONFIG_NET_CLS_RSVP=m
    CONFIG_NET_CLS_RSVP6=m
    # CONFIG_NET_EMATCH is not set
    CONFIG_NET_CLS_ACT=y
    CONFIG_NET_ACT_POLICE=y
    CONFIG_NET_ACT_GACT=y
    CONFIG_GACT_PROB=y
    CONFIG_NET_ACT_MIRRED=y
    CONFIG_NET_ACT_IPT=m
    # CONFIG_NET_ACT_PEDIT is not set
    # CONFIG_NET_ACT_SIMP is not set
    CONFIG_NET_CLS_POLICE=y
    # CONFIG_NET_CLS_IND is not set

    #
    # Network testing
    #
    CONFIG_NET_PKTGEN=m
    # CONFIG_HAMRADIO is not set
    # CONFIG_IRDA is not set
    # CONFIG_BT is not set
    # CONFIG_AF_RXRPC is not set

    #
    # Wireless
    #
    # CONFIG_CFG80211 is not set
    # CONFIG_WIRELESS_EXT is not set
    # CONFIG_MAC80211 is not set
    # CONFIG_IEEE80211 is not set
    # CONFIG_RFKILL is not set

    #
    # Device Drivers
    #

    #
    # Generic Driver Options
    #
    CONFIG_STANDALONE=y
    CONFIG_PREVENT_FIRMWARE_BUILD=y
    CONFIG_FW_LOADER=y
    # CONFIG_DEBUG_DRIVER is not set
    # CONFIG_DEBUG_DEVRES is not set
    # CONFIG_SYS_HYPERVISOR is not set
    # CONFIG_CONNECTOR is not set
    # CONFIG_MTD is not set
    # CONFIG_PARPORT is not set
    CONFIG_PNP=y
    # CONFIG_PNP_DEBUG is not set

    #
    # Protocols
    #
    CONFIG_PNPACPI=y
    CONFIG_BLK_DEV=y
    CONFIG_BLK_DEV_FD=y
    # CONFIG_BLK_CPQ_DA is not set
    # CONFIG_BLK_CPQ_CISS_DA is not set
    # CONFIG_BLK_DEV_DAC960 is not set
    # CONFIG_BLK_DEV_UMEM is not set
    # CONFIG_BLK_DEV_COW_COMMON is not set
    CONFIG_BLK_DEV_LOOP=y
    # CONFIG_BLK_DEV_CRYPTOLOOP is not set
    # CONFIG_BLK_DEV_NBD is not set
    # CONFIG_BLK_DEV_SX8 is not set
    # CONFIG_BLK_DEV_UB is not set
    # CONFIG_BLK_DEV_RAM is not set
    CONFIG_CDROM_PKTCDVD=y
    CONFIG_CDROM_PKTCDVD_BUFFERS=32
    # CONFIG_CDROM_PKTCDVD_WCACHE is not set
    # CONFIG_ATA_OVER_ETH is not set
    CONFIG_MISC_DEVICES=y
    # CONFIG_IBM_ASM is not set
    # CONFIG_PHANTOM is not set
    # CONFIG_EEPROM_93CX6 is not set
    # CONFIG_SGI_IOC4 is not set
    # CONFIG_TIFM_CORE is not set
    # CONFIG_MSI_LAPTOP is not set
    # CONFIG_SONY_LAPTOP is not set
    # CONFIG_THINKPAD_ACPI is not set
    CONFIG_IDE=y
    CONFIG_BLK_DEV_IDE=y

    #
    # Please see Documentation/ide.txt for help/info on IDE drives
    #
    # CONFIG_BLK_DEV_IDE_SATA is not set
    # CONFIG_BLK_DEV_HD_IDE is not set
    CONFIG_BLK_DEV_IDEDISK=y
    # CONFIG_IDEDISK_MULTI_MODE is not set
    CONFIG_BLK_DEV_IDECD=y
    # CONFIG_BLK_DEV_IDETAPE is not set
    # CONFIG_BLK_DEV_IDEFLOPPY is not set
    CONFIG_BLK_DEV_IDESCSI=y
    # CONFIG_BLK_DEV_IDEACPI is not set
    # CONFIG_IDE_TASK_IOCTL is not set
    CONFIG_IDE_PROC_FS=y

    #
    # IDE chipset support/bugfixes
    #
    # CONFIG_IDE_GENERIC is not set
    # CONFIG_BLK_DEV_PLATFORM is not set
    # CONFIG_BLK_DEV_CMD640 is not set
    # CONFIG_BLK_DEV_IDEPNP is not set

    #
    # PCI IDE chipsets support
    #
    CONFIG_BLK_DEV_IDEPCI=y
    # CONFIG_IDEPCI_SHARE_IRQ is not set
    CONFIG_IDEPCI_PCIBUS_ORDER=y
    # CONFIG_BLK_DEV_OFFBOARD is not set
    # CONFIG_BLK_DEV_GENERIC is not set
    # CONFIG_BLK_DEV_OPTI621 is not set
    # CONFIG_BLK_DEV_RZ1000 is not set
    CONFIG_BLK_DEV_IDEDMA_PCI=y
    # CONFIG_BLK_DEV_AEC62XX is not set
    # CONFIG_BLK_DEV_ALI15X3 is not set
    CONFIG_BLK_DEV_AMD74XX=y
    # CONFIG_BLK_DEV_ATIIXP is not set
    # CONFIG_BLK_DEV_CMD64X is not set
    # CONFIG_BLK_DEV_TRIFLEX is not set
    # CONFIG_BLK_DEV_CY82C693 is not set
    # CONFIG_BLK_DEV_CS5520 is not set
    # CONFIG_BLK_DEV_CS5530 is not set
    # CONFIG_BLK_DEV_HPT34X is not set
    CONFIG_BLK_DEV_HPT366=y
    # CONFIG_BLK_DEV_JMICRON is not set
    # CONFIG_BLK_DEV_SC1200 is not set
    # CONFIG_BLK_DEV_PIIX is not set
    # CONFIG_BLK_DEV_IT8213 is not set
    # CONFIG_BLK_DEV_IT821X is not set
    # CONFIG_BLK_DEV_NS87415 is not set
    # CONFIG_BLK_DEV_PDC202XX_OLD is not set
    # CONFIG_BLK_DEV_PDC202XX_NEW is not set
    # CONFIG_BLK_DEV_SVWKS is not set
    # CONFIG_BLK_DEV_SIIMAGE is not set
    # CONFIG_BLK_DEV_SIS5513 is not set
    # CONFIG_BLK_DEV_SLC90E66 is not set
    # CONFIG_BLK_DEV_TRM290 is not set
    # CONFIG_BLK_DEV_VIA82CXXX is not set
    # CONFIG_BLK_DEV_TC86C001 is not set
    # CONFIG_IDE_ARM is not set
    CONFIG_BLK_DEV_IDEDMA=y
    # CONFIG_BLK_DEV_HD is not set

    #
    # SCSI device support
    #
    # CONFIG_RAID_ATTRS is not set
    CONFIG_SCSI=y
    CONFIG_SCSI_DMA=y
    # CONFIG_SCSI_TGT is not set
    # CONFIG_SCSI_NETLINK is not set
    CONFIG_SCSI_PROC_FS=y

    #
    # SCSI support type (disk, tape, CD-ROM)
    #
    CONFIG_BLK_DEV_SD=y
    # CONFIG_CHR_DEV_ST is not set
    # CONFIG_CHR_DEV_OSST is not set
    CONFIG_BLK_DEV_SR=y
    # CONFIG_BLK_DEV_SR_VENDOR is not set
    CONFIG_CHR_DEV_SG=y
    # CONFIG_CHR_DEV_SCH is not set

    #
    # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
    #
    CONFIG_SCSI_MULTI_LUN=y
    CONFIG_SCSI_CONSTANTS=y
    CONFIG_SCSI_LOGGING=y
    # CONFIG_SCSI_SCAN_ASYNC is not set
    CONFIG_SCSI_WAIT_SCAN=m

    #
    # SCSI Transports
    #
    # CONFIG_SCSI_SPI_ATTRS is not set
    # CONFIG_SCSI_FC_ATTRS is not set
    # CONFIG_SCSI_ISCSI_ATTRS is not set
    # CONFIG_SCSI_SAS_LIBSAS is not set
    # CONFIG_SCSI_SRP_ATTRS is not set
    # CONFIG_SCSI_LOWLEVEL is not set
    CONFIG_ATA=y
    # CONFIG_ATA_NONSTANDARD is not set
    CONFIG_ATA_ACPI=y
    CONFIG_SATA_AHCI=y
    # CONFIG_SATA_SVW is not set
    # CONFIG_ATA_PIIX is not set
    # CONFIG_SATA_MV is not set
    CONFIG_SATA_NV=y
    # CONFIG_PDC_ADMA is not set
    # CONFIG_SATA_QSTOR is not set
    # CONFIG_SATA_PROMISE is not set
    # CONFIG_SATA_SX4 is not set
    CONFIG_SATA_SIL=y
    CONFIG_SATA_SIL24=y
    # CONFIG_SATA_SIS is not set
    # CONFIG_SATA_ULI is not set
    # CONFIG_SATA_VIA is not set
    # CONFIG_SATA_VITESSE is not set
    # CONFIG_SATA_INIC162X is not set
    # CONFIG_PATA_ALI is not set
    # CONFIG_PATA_AMD is not set
    # CONFIG_PATA_ARTOP is not set
    # CONFIG_PATA_ATIIXP is not set
    # CONFIG_PATA_CMD640_PCI is not set
    # CONFIG_PATA_CMD64X is not set
    # CONFIG_PATA_CS5520 is not set
    # CONFIG_PATA_CS5530 is not set
    # CONFIG_PATA_CYPRESS is not set
    # CONFIG_PATA_EFAR is not set
    # CONFIG_ATA_GENERIC is not set
    # CONFIG_PATA_HPT366 is not set
    # CONFIG_PATA_HPT37X is not set
    # CONFIG_PATA_HPT3X2N is not set
    # CONFIG_PATA_HPT3X3 is not set
    # CONFIG_PATA_IT821X is not set
    # CONFIG_PATA_IT8213 is not set
    # CONFIG_PATA_JMICRON is not set
    # CONFIG_PATA_TRIFLEX is not set
    # CONFIG_PATA_MARVELL is not set
    # CONFIG_PATA_MPIIX is not set
    # CONFIG_PATA_OLDPIIX is not set
    # CONFIG_PATA_NETCELL is not set
    # CONFIG_PATA_NS87410 is not set
    # CONFIG_PATA_OPTI is not set
    # CONFIG_PATA_OPTIDMA is not set
    # CONFIG_PATA_PDC_OLD is not set
    # CONFIG_PATA_RADISYS is not set
    # CONFIG_PATA_RZ1000 is not set
    # CONFIG_PATA_SC1200 is not set
    # CONFIG_PATA_SERVERWORKS is not set
    # CONFIG_PATA_PDC2027X is not set
    # CONFIG_PATA_SIL680 is not set
    # CONFIG_PATA_SIS is not set
    # CONFIG_PATA_VIA is not set
    # CONFIG_PATA_WINBOND is not set
    CONFIG_MD=y
    CONFIG_BLK_DEV_MD=y
    CONFIG_MD_LINEAR=y
    CONFIG_MD_RAID0=y
    CONFIG_MD_RAID1=y
    CONFIG_MD_RAID10=y
    CONFIG_MD_RAID456=y
    CONFIG_MD_RAID5_RESHAPE=y
    # CONFIG_MD_MULTIPATH is not set
    # CONFIG_MD_FAULTY is not set
    # CONFIG_BLK_DEV_DM is not set
    # CONFIG_FUSION is not set

    #
    # IEEE 1394 (FireWire) support
    #
    # CONFIG_FIREWIRE is not set
    CONFIG_IEEE1394=y

    #
    # Subsystem Options
    #
    # CONFIG_IEEE1394_VERBOSEDEBUG is not set

    #
    # Controllers
    #
    # CONFIG_IEEE1394_PCILYNX is not set
    CONFIG_IEEE1394_OHCI1394=y

    #
    # Protocols
    #
    CONFIG_IEEE1394_VIDEO1394=y
    CONFIG_IEEE1394_SBP2=y
    # CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
    # CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
    # CONFIG_IEEE1394_ETH1394 is not set
    CONFIG_IEEE1394_DV1394=y
    CONFIG_IEEE1394_RAWIO=y
    # CONFIG_I2O is not set
    CONFIG_MACINTOSH_DRIVERS=y
    # CONFIG_MAC_EMUMOUSEBTN is not set
    CONFIG_NETDEVICES=y
    # CONFIG_NETDEVICES_MULTIQUEUE is not set
    # CONFIG_IFB is not set
    CONFIG_DUMMY=y
    # CONFIG_BONDING is not set
    # CONFIG_MACVLAN is not set
    # CONFIG_EQUALIZER is not set
    # CONFIG_TUN is not set
    # CONFIG_VETH is not set
    # CONFIG_NET_SB1000 is not set
    CONFIG_ARCNET=m
    CONFIG_ARCNET_1201=m
    CONFIG_ARCNET_1051=m
    CONFIG_ARCNET_RAW=m
    # CONFIG_ARCNET_CAP is not set
    CONFIG_ARCNET_COM90xx=m
    CONFIG_ARCNET_COM90xxIO=m
    CONFIG_ARCNET_RIM_I=m
    CONFIG_ARCNET_COM20020=m
    CONFIG_ARCNET_COM20020_PCI=m
    CONFIG_PHYLIB=y

    #
    # MII PHY device drivers
    #
    CONFIG_MARVELL_PHY=y
    CONFIG_DAVICOM_PHY=y
    CONFIG_QSEMI_PHY=y
    CONFIG_LXT_PHY=y
    CONFIG_CICADA_PHY=y
    # CONFIG_VITESSE_PHY is not set
    # CONFIG_SMSC_PHY is not set
    # CONFIG_BROADCOM_PHY is not set
    # CONFIG_ICPLUS_PHY is not set
    # CONFIG_FIXED_PHY is not set
    CONFIG_NET_ETHERNET=y
    CONFIG_MII=y
    # CONFIG_HAPPYMEAL is not set
    # CONFIG_SUNGEM is not set
    # CONFIG_CASSINI is not set
    # CONFIG_NET_VENDOR_3COM is not set
    CONFIG_NET_TULIP=y
    # CONFIG_DE2104X is not set
    CONFIG_TULIP=y
    # CONFIG_TULIP_MWI is not set
    # CONFIG_TULIP_MMIO is not set
    # CONFIG_TULIP_NAPI is not set
    # CONFIG_DE4X5 is not set
    # CONFIG_WINBOND_840 is not set
    # CONFIG_DM9102 is not set
    # CONFIG_ULI526X is not set
    # CONFIG_HP100 is not set
    CONFIG_NET_PCI=y
    # CONFIG_PCNET32 is not set
    # CONFIG_AMD8111_ETH is not set
    # CONFIG_ADAPTEC_STARFIRE is not set
    # CONFIG_B44 is not set
    CONFIG_FORCEDETH=y
    CONFIG_FORCEDETH_NAPI=y
    # CONFIG_DGRS is not set
    # CONFIG_EEPRO100 is not set
    # CONFIG_E100 is not set
    # CONFIG_FEALNX is not set
    # CONFIG_NATSEMI is not set
    # CONFIG_NE2K_PCI is not set
    # CONFIG_8139CP is not set
    # CONFIG_8139TOO is not set
    # CONFIG_SIS900 is not set
    # CONFIG_EPIC100 is not set
    # CONFIG_SUNDANCE is not set
    # CONFIG_VIA_RHINE is not set
    # CONFIG_SC92031 is not set
    CONFIG_NETDEV_1000=y
    # CONFIG_ACENIC is not set
    # CONFIG_DL2K is not set
    # CONFIG_E1000 is not set
    # CONFIG_E1000E is not set
    # CONFIG_NS83820 is not set
    # CONFIG_HAMACHI is not set
    # CONFIG_YELLOWFIN is not set
    # CONFIG_R8169 is not set
    # CONFIG_SIS190 is not set
    CONFIG_SKGE=y
    # CONFIG_SKY2 is not set
    # CONFIG_VIA_VELOCITY is not set
    # CONFIG_TIGON3 is not set
    # CONFIG_BNX2 is not set
    # CONFIG_QLA3XXX is not set
    # CONFIG_ATL1 is not set
    # CONFIG_NETDEV_10000 is not set
    # CONFIG_TR is not set

    #
    # Wireless LAN
    #
    # CONFIG_WLAN_PRE80211 is not set
    # CONFIG_WLAN_80211 is not set

    #
    # USB Network Adapters
    #
    # CONFIG_USB_CATC is not set
    # CONFIG_USB_KAWETH is not set
    # CONFIG_USB_PEGASUS is not set
    # CONFIG_USB_RTL8150 is not set
    # CONFIG_USB_USBNET_MII is not set
    # CONFIG_USB_USBNET is not set
    # CONFIG_WAN is not set
    # CONFIG_FDDI is not set
    # CONFIG_HIPPI is not set
    # CONFIG_PPP is not set
    # CONFIG_SLIP is not set
    # CONFIG_NET_FC is not set
    # CONFIG_SHAPER is not set
    # CONFIG_NETCONSOLE is not set
    # CONFIG_NETPOLL is not set
    # CONFIG_NET_POLL_CONTROLLER is not set
    # CONFIG_ISDN is not set
    # CONFIG_PHONE is not set

    #
    # Input device support
    #
    CONFIG_INPUT=y
    # CONFIG_INPUT_FF_MEMLESS is not set
    # CONFIG_INPUT_POLLDEV is not set

    #
    # Userland interfaces
    #
    CONFIG_INPUT_MOUSEDEV=y
    CONFIG_INPUT_MOUSEDEV_PSAUX=y
    CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600
    CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200
    # CONFIG_INPUT_JOYDEV is not set
    # CONFIG_INPUT_TSDEV is not set
    # CONFIG_INPUT_EVDEV is not set
    # CONFIG_INPUT_EVBUG is not set

    #
    # Input Device Drivers
    #
    CONFIG_INPUT_KEYBOARD=y
    CONFIG_KEYBOARD_ATKBD=y
    # CONFIG_KEYBOARD_SUNKBD is not set
    # CONFIG_KEYBOARD_LKKBD is not set
    # CONFIG_KEYBOARD_XTKBD is not set
    # CONFIG_KEYBOARD_NEWTON is not set
    # CONFIG_KEYBOARD_STOWAWAY is not set
    CONFIG_INPUT_MOUSE=y
    CONFIG_MOUSE_PS2=y
    CONFIG_MOUSE_PS2_ALPS=y
    CONFIG_MOUSE_PS2_LOGIPS2PP=y
    CONFIG_MOUSE_PS2_SYNAPTICS=y
    CONFIG_MOUSE_PS2_LIFEBOOK=y
    CONFIG_MOUSE_PS2_TRACKPOINT=y
    # CONFIG_MOUSE_PS2_TOUCHKIT is not set
    # CONFIG_MOUSE_SERIAL is not set
    # CONFIG_MOUSE_APPLETOUCH is not set
    # CONFIG_MOUSE_VSXXXAA is not set
    # CONFIG_INPUT_JOYSTICK is not set
    # CONFIG_INPUT_TABLET is not set
    # CONFIG_INPUT_TOUCHSCREEN is not set
    CONFIG_INPUT_MISC=y
    CONFIG_INPUT_PCSPKR=y
    # CONFIG_INPUT_ATLAS_BTNS is not set
    # CONFIG_INPUT_ATI_REMOTE is not set
    # CONFIG_INPUT_ATI_REMOTE2 is not set
    # CONFIG_INPUT_KEYSPAN_REMOTE is not set
    # CONFIG_INPUT_POWERMATE is not set
    # CONFIG_INPUT_YEALINK is not set
    # CONFIG_INPUT_UINPUT is not set

    #
    # Hardware I/O ports
    #
    CONFIG_SERIO=y
    CONFIG_SERIO_I8042=y
    # CONFIG_SERIO_SERPORT is not set
    # CONFIG_SERIO_CT82C710 is not set
    # CONFIG_SERIO_PCIPS2 is not set
    CONFIG_SERIO_LIBPS2=y
    # CONFIG_SERIO_RAW is not set
    # CONFIG_GAMEPORT is not set

    #
    # Character devices
    #
    CONFIG_VT=y
    CONFIG_VT_CONSOLE=y
    CONFIG_HW_CONSOLE=y
    # CONFIG_VT_HW_CONSOLE_BINDING is not set
    # CONFIG_SERIAL_NONSTANDARD is not set
    # CONFIG_NOZOMI is not set

    #
    # Serial drivers
    #
    CONFIG_SERIAL_8250=y
    CONFIG_SERIAL_8250_CONSOLE=y
    CONFIG_FIX_EARLYCON_MEM=y
    CONFIG_SERIAL_8250_PCI=y
    CONFIG_SERIAL_8250_PNP=y
    CONFIG_SERIAL_8250_NR_UARTS=4
    CONFIG_SERIAL_8250_RUNTIME_UARTS=4
    CONFIG_SERIAL_8250_EXTENDED=y
    CONFIG_SERIAL_8250_MANY_PORTS=y
    CONFIG_SERIAL_8250_SHARE_IRQ=y
    # CONFIG_SERIAL_8250_DETECT_IRQ is not set
    CONFIG_SERIAL_8250_RSA=y

    #
    # Non-8250 serial port support
    #
    CONFIG_SERIAL_CORE=y
    CONFIG_SERIAL_CORE_CONSOLE=y
    # CONFIG_SERIAL_JSM is not set
    CONFIG_UNIX98_PTYS=y
    CONFIG_LEGACY_PTYS=y
    CONFIG_LEGACY_PTY_COUNT=256
    # CONFIG_IPMI_HANDLER is not set
    CONFIG_HW_RANDOM=y
    # CONFIG_HW_RANDOM_INTEL is not set
    CONFIG_HW_RANDOM_AMD=y
    CONFIG_NVRAM=y
    CONFIG_RTC=y
    # CONFIG_R3964 is not set
    # CONFIG_APPLICOM is not set
    CONFIG_AGP=y
    CONFIG_AGP_AMD64=y
    # CONFIG_AGP_INTEL is not set
    # CONFIG_AGP_SIS is not set
    # CONFIG_AGP_VIA is not set
    # CONFIG_DRM is not set
    # CONFIG_MWAVE is not set
    # CONFIG_PC8736x_GPIO is not set
    # CONFIG_RAW_DRIVER is not set
    CONFIG_HPET=y
    # CONFIG_HPET_RTC_IRQ is not set
    CONFIG_HPET_MMAP=y
    CONFIG_HANGCHECK_TIMER=y
    # CONFIG_TCG_TPM is not set
    # CONFIG_TELCLOCK is not set
    CONFIG_DEVPORT=y
    CONFIG_I2C=y
    CONFIG_I2C_BOARDINFO=y
    CONFIG_I2C_CHARDEV=y

    #
    # I2C Algorithms
    #
    CONFIG_I2C_ALGOBIT=y
    # CONFIG_I2C_ALGOPCF is not set
    # CONFIG_I2C_ALGOPCA is not set

    #
    # I2C Hardware Bus support
    #
    # CONFIG_I2C_ALI1535 is not set
    # CONFIG_I2C_ALI1563 is not set
    # CONFIG_I2C_ALI15X3 is not set
    # CONFIG_I2C_AMD756 is not set
    # CONFIG_I2C_AMD8111 is not set
    # CONFIG_I2C_I801 is not set
    # CONFIG_I2C_I810 is not set
    # CONFIG_I2C_PIIX4 is not set
    CONFIG_I2C_NFORCE2=m
    # CONFIG_I2C_OCORES is not set
    # CONFIG_I2C_PARPORT_LIGHT is not set
    # CONFIG_I2C_PROSAVAGE is not set
    # CONFIG_I2C_SAVAGE4 is not set
    # CONFIG_I2C_SIMTEC is not set
    # CONFIG_I2C_SIS5595 is not set
    # CONFIG_I2C_SIS630 is not set
    # CONFIG_I2C_SIS96X is not set
    # CONFIG_I2C_TAOS_EVM is not set
    # CONFIG_I2C_STUB is not set
    # CONFIG_I2C_TINY_USB is not set
    # CONFIG_I2C_VIA is not set
    # CONFIG_I2C_VIAPRO is not set
    # CONFIG_I2C_VOODOO3 is not set

    #
    # Miscellaneous I2C Chip support
    #
    # CONFIG_SENSORS_DS1337 is not set
    # CONFIG_SENSORS_DS1374 is not set
    # CONFIG_DS1682 is not set
    CONFIG_SENSORS_EEPROM=m
    # CONFIG_SENSORS_PCF8574 is not set
    # CONFIG_SENSORS_PCA9539 is not set
    # CONFIG_SENSORS_PCF8591 is not set
    # CONFIG_SENSORS_MAX6875 is not set
    # CONFIG_SENSORS_TSL2550 is not set
    # CONFIG_I2C_DEBUG_CORE is not set
    # CONFIG_I2C_DEBUG_ALGO is not set
    # CONFIG_I2C_DEBUG_BUS is not set
    # CONFIG_I2C_DEBUG_CHIP is not set

    #
    # SPI support
    #
    # CONFIG_SPI is not set
    # CONFIG_SPI_MASTER is not set
    # CONFIG_W1 is not set
    # CONFIG_POWER_SUPPLY is not set
    CONFIG_HWMON=m
    CONFIG_HWMON_VID=m
    # CONFIG_SENSORS_ABITUGURU is not set
    # CONFIG_SENSORS_ABITUGURU3 is not set
    # CONFIG_SENSORS_AD7418 is not set
    # CONFIG_SENSORS_ADM1021 is not set
    # CONFIG_SENSORS_ADM1025 is not set
    # CONFIG_SENSORS_ADM1026 is not set
    # CONFIG_SENSORS_ADM1029 is not set
    # CONFIG_SENSORS_ADM1031 is not set
    # CONFIG_SENSORS_ADM9240 is not set
    # CONFIG_SENSORS_ADT7470 is not set
    CONFIG_SENSORS_K8TEMP=m
    # CONFIG_SENSORS_ASB100 is not set
    # CONFIG_SENSORS_ATXP1 is not set
    # CONFIG_SENSORS_DS1621 is not set
    # CONFIG_SENSORS_F71805F is not set
    # CONFIG_SENSORS_F71882FG is not set
    # CONFIG_SENSORS_F75375S is not set
    # CONFIG_SENSORS_FSCHER is not set
    # CONFIG_SENSORS_FSCPOS is not set
    # CONFIG_SENSORS_GL518SM is not set
    # CONFIG_SENSORS_GL520SM is not set
    # CONFIG_SENSORS_CORETEMP is not set
    CONFIG_SENSORS_IT87=m
    # CONFIG_SENSORS_LM63 is not set
    # CONFIG_SENSORS_LM75 is not set
    # CONFIG_SENSORS_LM77 is not set
    # CONFIG_SENSORS_LM78 is not set
    # CONFIG_SENSORS_LM80 is not set
    # CONFIG_SENSORS_LM83 is not set
    # CONFIG_SENSORS_LM85 is not set
    # CONFIG_SENSORS_LM87 is not set
    # CONFIG_SENSORS_LM90 is not set
    # CONFIG_SENSORS_LM92 is not set
    # CONFIG_SENSORS_LM93 is not set
    # CONFIG_SENSORS_MAX1619 is not set
    # CONFIG_SENSORS_MAX6650 is not set
    # CONFIG_SENSORS_PC87360 is not set
    # CONFIG_SENSORS_PC87427 is not set
    # CONFIG_SENSORS_SIS5595 is not set
    # CONFIG_SENSORS_DME1737 is not set
    # CONFIG_SENSORS_SMSC47M1 is not set
    # CONFIG_SENSORS_SMSC47M192 is not set
    # CONFIG_SENSORS_SMSC47B397 is not set
    # CONFIG_SENSORS_THMC50 is not set
    # CONFIG_SENSORS_VIA686A is not set
    # CONFIG_SENSORS_VT1211 is not set
    # CONFIG_SENSORS_VT8231 is not set
    # CONFIG_SENSORS_W83781D is not set
    CONFIG_SENSORS_W83791D=m
    # CONFIG_SENSORS_W83792D is not set
    # CONFIG_SENSORS_W83793 is not set
    # CONFIG_SENSORS_W83L785TS is not set
    # CONFIG_SENSORS_W83627HF is not set
    # CONFIG_SENSORS_W83627EHF is not set
    # CONFIG_SENSORS_HDAPS is not set
    # CONFIG_SENSORS_APPLESMC is not set
    # CONFIG_HWMON_DEBUG_CHIP is not set
    CONFIG_WATCHDOG=y
    # CONFIG_WATCHDOG_NOWAYOUT is not set
    CONFIG_WATCHDOG_CORE=m
    # CONFIG_WATCHDOG_DEBUG_CORE is not set

    #
    # Watchdog Device Drivers
    #
    CONFIG_SOFT_WATCHDOG=m
    CONFIG_ACQUIRE_WDT=m
    CONFIG_ADVANTECH_WDT=m
    CONFIG_ALIM1535_WDT=m
    CONFIG_ALIM7101_WDT=m
    CONFIG_SC520_WDT=m
    CONFIG_EUROTECH_WDT=m
    CONFIG_IB700_WDT=m
    # CONFIG_IBMASR is not set
    CONFIG_WAFER_WDT=m
    # CONFIG_I6300ESB_WDT is not set
    # CONFIG_ITCO_WDT is not set
    CONFIG_SC1200_WDT=m
    # CONFIG_PC87413_WDT is not set
    CONFIG_60XX_WDT=m
    # CONFIG_SBC8360_WDT is not set
    CONFIG_CPU5_WDT=m
    # CONFIG_SMSC37B787_WDT is not set
    CONFIG_W83627HF_WDT=m
    # CONFIG_W83697HF_WDT is not set
    CONFIG_W83877F_WDT=m
    # CONFIG_W83977F_WDT is not set
    CONFIG_MACHZ_WDT=m
    # CONFIG_SBC_EPX_C3_WATCHDOG is not set

    #
    # PCI-based Watchdog Cards
    #
    CONFIG_PCIPCWATCHDOG=m
    CONFIG_WDTPCI=m
    CONFIG_WDT_501_PCI=y

    #
    # USB-based Watchdog Cards
    #
    CONFIG_USBPCWATCHDOG=m

    #
    # Sonics Silicon Backplane
    #
    CONFIG_SSB_POSSIBLE=y
    # CONFIG_SSB is not set

    #
    # Multifunction device drivers
    #
    # CONFIG_MFD_SM501 is not set

    #
    # Multimedia devices
    #
    # CONFIG_VIDEO_DEV is not set
    # CONFIG_DVB_CORE is not set
    # CONFIG_DAB is not set

    #
    # Graphics support
    #
    CONFIG_BACKLIGHT_LCD_SUPPORT=y
    CONFIG_LCD_CLASS_DEVICE=m
    CONFIG_BACKLIGHT_CLASS_DEVICE=y
    # CONFIG_BACKLIGHT_PROGEAR is not set

    #
    # Display device support
    #
    # CONFIG_DISPLAY_SUPPORT is not set
    CONFIG_VGASTATE=y
    # CONFIG_VIDEO_OUTPUT_CONTROL is not set
    CONFIG_FB=y
    # CONFIG_FIRMWARE_EDID is not set
    CONFIG_FB_DDC=y
    CONFIG_FB_CFB_FILLRECT=y
    CONFIG_FB_CFB_COPYAREA=y
    CONFIG_FB_CFB_IMAGEBLIT=y
    # CONFIG_FB_SYS_FILLRECT is not set
    # CONFIG_FB_SYS_COPYAREA is not set
    # CONFIG_FB_SYS_IMAGEBLIT is not set
    # CONFIG_FB_SYS_FOPS is not set
    CONFIG_FB_DEFERRED_IO=y
    # CONFIG_FB_SVGALIB is not set
    # CONFIG_FB_MACMODES is not set
    CONFIG_FB_BACKLIGHT=y
    CONFIG_FB_MODE_HELPERS=y
    # CONFIG_FB_TILEBLITTING is not set

    #
    # Frame buffer hardware drivers
    #
    # CONFIG_FB_CIRRUS is not set
    # CONFIG_FB_PM2 is not set
    # CONFIG_FB_CYBER2000 is not set
    # CONFIG_FB_ARC is not set
    # CONFIG_FB_ASILIANT is not set
    # CONFIG_FB_IMSTT is not set
    # CONFIG_FB_VGA16 is not set
    # CONFIG_FB_VESA is not set
    # CONFIG_FB_EFI is not set
    # CONFIG_FB_HECUBA is not set
    # CONFIG_FB_HGA is not set
    # CONFIG_FB_S1D13XXX is not set
    CONFIG_FB_NVIDIA=y
    CONFIG_FB_NVIDIA_I2C=y
    # CONFIG_FB_NVIDIA_DEBUG is not set
    CONFIG_FB_NVIDIA_BACKLIGHT=y
    # CONFIG_FB_RIVA is not set
    # CONFIG_FB_LE80578 is not set
    # CONFIG_FB_INTEL is not set
    # CONFIG_FB_MATROX is not set
    # CONFIG_FB_RADEON is not set
    # CONFIG_FB_ATY128 is not set
    # CONFIG_FB_ATY is not set
    # CONFIG_FB_S3 is not set
    # CONFIG_FB_SAVAGE is not set
    # CONFIG_FB_SIS is not set
    # CONFIG_FB_NEOMAGIC is not set
    # CONFIG_FB_KYRO is not set
    # CONFIG_FB_3DFX is not set
    # CONFIG_FB_VOODOO1 is not set
    # CONFIG_FB_VT8623 is not set
    # CONFIG_FB_TRIDENT is not set
    # CONFIG_FB_ARK is not set
    # CONFIG_FB_PM3 is not set
    # CONFIG_FB_GEODE is not set
    # CONFIG_FB_VIRTUAL is not set

    #
    # Console display driver support
    #
    CONFIG_VGA_CONSOLE=y
    # CONFIG_VGACON_SOFT_SCROLLBACK is not set
    CONFIG_VIDEO_SELECT=y
    CONFIG_DUMMY_CONSOLE=y
    CONFIG_FRAMEBUFFER_CONSOLE=y
    # CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
    # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
    CONFIG_FONTS=y
    # CONFIG_FONT_8x8 is not set
    # CONFIG_FONT_8x16 is not set
    # CONFIG_FONT_6x11 is not set
    # CONFIG_FONT_7x14 is not set
    # CONFIG_FONT_PEARL_8x8 is not set
    # CONFIG_FONT_ACORN_8x8 is not set
    # CONFIG_FONT_MINI_4x6 is not set
    # CONFIG_FONT_SUN8x16 is not set
    # CONFIG_FONT_SUN12x22 is not set
    CONFIG_FONT_10x18=y
    CONFIG_LOGO=y
    CONFIG_LOGO_LINUX_MONO=y
    CONFIG_LOGO_LINUX_VGA16=y
    CONFIG_LOGO_LINUX_CLUT224=y

    #
    # Sound
    #
    CONFIG_SOUND=m

    #
    # Advanced Linux Sound Architecture
    #
    CONFIG_SND=m
    CONFIG_SND_TIMER=m
    CONFIG_SND_PCM=m
    CONFIG_SND_HWDEP=m
    CONFIG_SND_RAWMIDI=m
    CONFIG_SND_SEQUENCER=m
    CONFIG_SND_SEQ_DUMMY=m
    CONFIG_SND_OSSEMUL=y
    CONFIG_SND_MIXER_OSS=m
    CONFIG_SND_PCM_OSS=m
    CONFIG_SND_PCM_OSS_PLUGINS=y
    CONFIG_SND_SEQUENCER_OSS=y
    CONFIG_SND_RTCTIMER=m
    CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
    # CONFIG_SND_DYNAMIC_MINORS is not set
    # CONFIG_SND_SUPPORT_OLD_API is not set
    CONFIG_SND_VERBOSE_PROCFS=y
    # CONFIG_SND_VERBOSE_PRINTK is not set
    # CONFIG_SND_DEBUG is not set

    #
    # Generic devices
    #
    CONFIG_SND_AC97_CODEC=m
    CONFIG_SND_DUMMY=m
    CONFIG_SND_VIRMIDI=m
    # CONFIG_SND_MTPAV is not set
    # CONFIG_SND_SERIAL_U16550 is not set
    # CONFIG_SND_MPU401 is not set

    #
    # PCI devices
    #
    # CONFIG_SND_AD1889 is not set
    # CONFIG_SND_ALS300 is not set
    # CONFIG_SND_ALS4000 is not set
    # CONFIG_SND_ALI5451 is not set
    # CONFIG_SND_ATIIXP is not set
    # CONFIG_SND_ATIIXP_MODEM is not set
    # CONFIG_SND_AU8810 is not set
    # CONFIG_SND_AU8820 is not set
    # CONFIG_SND_AU8830 is not set
    # CONFIG_SND_AZT3328 is not set
    # CONFIG_SND_BT87X is not set
    # CONFIG_SND_CA0106 is not set
    # CONFIG_SND_CMIPCI is not set
    # CONFIG_SND_CS4281 is not set
    # CONFIG_SND_CS46XX is not set
    # CONFIG_SND_CS5530 is not set
    # CONFIG_SND_DARLA20 is not set
    # CONFIG_SND_GINA20 is not set
    # CONFIG_SND_LAYLA20 is not set
    # CONFIG_SND_DARLA24 is not set
    # CONFIG_SND_GINA24 is not set
    # CONFIG_SND_LAYLA24 is not set
    # CONFIG_SND_MONA is not set
    # CONFIG_SND_MIA is not set
    # CONFIG_SND_ECHO3G is not set
    # CONFIG_SND_INDIGO is not set
    # CONFIG_SND_INDIGOIO is not set
    # CONFIG_SND_INDIGODJ is not set
    CONFIG_SND_EMU10K1=m
    # CONFIG_SND_EMU10K1X is not set
    # CONFIG_SND_ENS1370 is not set
    # CONFIG_SND_ENS1371 is not set
    # CONFIG_SND_ES1938 is not set
    # CONFIG_SND_ES1968 is not set
    # CONFIG_SND_FM801 is not set
    # CONFIG_SND_HDA_INTEL is not set
    # CONFIG_SND_HDSP is not set
    # CONFIG_SND_HDSPM is not set
    # CONFIG_SND_ICE1712 is not set
    # CONFIG_SND_ICE1724 is not set
    # CONFIG_SND_INTEL8X0 is not set
    # CONFIG_SND_INTEL8X0M is not set
    # CONFIG_SND_KORG1212 is not set
    # CONFIG_SND_MAESTRO3 is not set
    # CONFIG_SND_MIXART is not set
    # CONFIG_SND_NM256 is not set
    # CONFIG_SND_PCXHR is not set
    # CONFIG_SND_RIPTIDE is not set
    # CONFIG_SND_RME32 is not set
    # CONFIG_SND_RME96 is not set
    # CONFIG_SND_RME9652 is not set
    # CONFIG_SND_SONICVIBES is not set
    # CONFIG_SND_TRIDENT is not set
    # CONFIG_SND_VIA82XX is not set
    # CONFIG_SND_VIA82XX_MODEM is not set
    # CONFIG_SND_VX222 is not set
    # CONFIG_SND_YMFPCI is not set
    # CONFIG_SND_AC97_POWER_SAVE is not set

    #
    # USB devices
    #
    # CONFIG_SND_USB_AUDIO is not set
    # CONFIG_SND_USB_USX2Y is not set
    # CONFIG_SND_USB_CAIAQ is not set

    #
    # System on Chip audio support
    #
    # CONFIG_SND_SOC is not set

    #
    # SoC Audio support for SuperH
    #

    #
    # Open Sound System
    #
    # CONFIG_SOUND_PRIME is not set
    CONFIG_AC97_BUS=m
    CONFIG_HID_SUPPORT=y
    CONFIG_HID=y
    # CONFIG_HID_DEBUG is not set
    # CONFIG_HIDRAW is not set

    #
    # USB Input Devices
    #
    # CONFIG_USB_HID is not set

    #
    # USB HID Boot Protocol drivers
    #
    CONFIG_USB_KBD=m
    CONFIG_USB_MOUSE=m
    CONFIG_USB_SUPPORT=y
    CONFIG_USB_ARCH_HAS_HCD=y
    CONFIG_USB_ARCH_HAS_OHCI=y
    CONFIG_USB_ARCH_HAS_EHCI=y
    CONFIG_USB=y
    # CONFIG_USB_DEBUG is not set

    #
    # Miscellaneous USB options
    #
    CONFIG_USB_DEVICEFS=y
    # CONFIG_USB_DEVICE_CLASS is not set
    # CONFIG_USB_DYNAMIC_MINORS is not set
    # CONFIG_USB_SUSPEND is not set
    # CONFIG_USB_PERSIST is not set
    # CONFIG_USB_OTG is not set

    #
    # USB Host Controller Drivers
    #
    CONFIG_USB_EHCI_HCD=y
    # CONFIG_USB_EHCI_SPLIT_ISO is not set
    CONFIG_USB_EHCI_ROOT_HUB_TT=y
    # CONFIG_USB_EHCI_TT_NEWSCHED is not set
    # CONFIG_USB_ISP116X_HCD is not set
    CONFIG_USB_OHCI_HCD=y
    # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
    # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
    CONFIG_USB_OHCI_LITTLE_ENDIAN=y
    # CONFIG_USB_UHCI_HCD is not set
    # CONFIG_USB_SL811_HCD is not set
    # CONFIG_USB_R8A66597_HCD is not set

    #
    # USB Device Class drivers
    #
    # CONFIG_USB_ACM is not set
    CONFIG_USB_PRINTER=y

    #
    # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
    #

    #
    # may also be needed; see USB_STORAGE Help for more information
    #
    # CONFIG_USB_STORAGE is not set
    # CONFIG_USB_LIBUSUAL is not set

    #
    # USB Imaging devices
    #
    # CONFIG_USB_MDC800 is not set
    # CONFIG_USB_MICROTEK is not set
    # CONFIG_USB_MON is not set

    #
    # USB port drivers
    #

    #
    # USB Serial Converter support
    #
    # CONFIG_USB_SERIAL is not set

    #
    # USB Miscellaneous drivers
    #
    # CONFIG_USB_EMI62 is not set
    # CONFIG_USB_EMI26 is not set
    # CONFIG_USB_ADUTUX is not set
    # CONFIG_USB_AUERSWALD is not set
    # CONFIG_USB_RIO500 is not set
    # CONFIG_USB_LEGOTOWER is not set
    # CONFIG_USB_LCD is not set
    # CONFIG_USB_BERRY_CHARGE is not set
    # CONFIG_USB_IPHONE is not set
    # CONFIG_USB_LED is not set
    # CONFIG_USB_CYPRESS_CY7C63 is not set
    # CONFIG_USB_CYTHERM is not set
    # CONFIG_USB_PHIDGET is not set
    # CONFIG_USB_IDMOUSE is not set
    # CONFIG_USB_FTDI_ELAN is not set
    # CONFIG_USB_APPLEDISPLAY is not set
    # CONFIG_USB_SISUSBVGA is not set
    # CONFIG_USB_LD is not set
    # CONFIG_USB_TRANCEVIBRATOR is not set
    # CONFIG_USB_IOWARRIOR is not set
    # CONFIG_USB_TEST is not set
    # CONFIG_USB_GOTEMP is not set

    #
    # USB DSL modem support
    #

    #
    # USB Gadget Support
    #
    # CONFIG_USB_GADGET is not set
    # CONFIG_MMC is not set
    # CONFIG_NEW_LEDS is not set
    # CONFIG_INFINIBAND is not set
    CONFIG_EDAC=y

    #
    # Reporting subsystems
    #
    # CONFIG_EDAC_DEBUG is not set
    CONFIG_EDAC_MM_EDAC=y
    # CONFIG_EDAC_E752X is not set
    # CONFIG_EDAC_I82975X is not set
    # CONFIG_EDAC_I5000 is not set
    CONFIG_RTC_LIB=y
    CONFIG_RTC_CLASS=y
    CONFIG_RTC_HCTOSYS=y
    CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
    # CONFIG_RTC_DEBUG is not set

    #
    # RTC interfaces
    #
    CONFIG_RTC_INTF_SYSFS=y
    CONFIG_RTC_INTF_PROC=y
    CONFIG_RTC_INTF_DEV=y
    # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
    # CONFIG_RTC_DRV_TEST is not set

    #
    # I2C RTC drivers
    #
    CONFIG_RTC_DRV_DS1307=m
    CONFIG_RTC_DRV_DS1672=m
    CONFIG_RTC_DRV_MAX6900=m
    CONFIG_RTC_DRV_RS5C372=m
    CONFIG_RTC_DRV_ISL1208=m
    CONFIG_RTC_DRV_X1205=m
    CONFIG_RTC_DRV_PCF8563=m
    # CONFIG_RTC_DRV_PCF8583 is not set
    # CONFIG_RTC_DRV_M41T80 is not set

    #
    # SPI RTC drivers
    #

    #
    # Platform RTC drivers
    #
    CONFIG_RTC_DRV_CMOS=m
    CONFIG_RTC_DRV_DS1553=m
    # CONFIG_RTC_DRV_STK17TA8 is not set
    CONFIG_RTC_DRV_DS1742=m
    CONFIG_RTC_DRV_M48T86=m
    # CONFIG_RTC_DRV_M48T59 is not set
    CONFIG_RTC_DRV_V3020=m

    #
    # on-CPU RTC drivers
    #
    # CONFIG_DMADEVICES is not set
    CONFIG_VIRTUALIZATION=y
    # CONFIG_KVM is not set

    #
    # Userspace I/O
    #
    # CONFIG_UIO is not set

    #
    # Firmware Drivers
    #
    # CONFIG_EDD is not set
    # CONFIG_DELL_RBU is not set
    # CONFIG_DCDBAS is not set
    CONFIG_DMIID=y

    #
    # File systems
    #
    CONFIG_EXT2_FS=y
    CONFIG_EXT2_FS_XATTR=y
    CONFIG_EXT2_FS_POSIX_ACL=y
    CONFIG_EXT2_FS_SECURITY=y
    # CONFIG_EXT2_FS_XIP is not set
    CONFIG_EXT3_FS=y
    CONFIG_EXT3_FS_XATTR=y
    CONFIG_EXT3_FS_POSIX_ACL=y
    CONFIG_EXT3_FS_SECURITY=y
    # CONFIG_EXT4DEV_FS is not set
    CONFIG_JBD=y
    # CONFIG_JBD_DEBUG is not set
    CONFIG_FS_MBCACHE=y
    # CONFIG_REISER4_FS is not set
    CONFIG_REISERFS_FS=y
    # CONFIG_REISERFS_CHECK is not set
    # CONFIG_REISERFS_PROC_INFO is not set
    # CONFIG_REISERFS_FS_XATTR is not set
    # CONFIG_JFS_FS is not set
    CONFIG_FS_POSIX_ACL=y
    # CONFIG_XFS_FS is not set
    # CONFIG_GFS2_FS is not set
    # CONFIG_OCFS2_FS is not set
    CONFIG_MINIX_FS=y
    # CONFIG_ROMFS_FS is not set
    CONFIG_INOTIFY=y
    CONFIG_INOTIFY_USER=y
    # CONFIG_QUOTA is not set
    CONFIG_DNOTIFY=y
    # CONFIG_AUTOFS_FS is not set
    # CONFIG_AUTOFS4_FS is not set
    # CONFIG_FUSE_FS is not set

    #
    # CD-ROM/DVD Filesystems
    #
    CONFIG_ISO9660_FS=y
    CONFIG_JOLIET=y
    CONFIG_ZISOFS=y
    CONFIG_UDF_FS=y
    CONFIG_UDF_NLS=y

    #
    # DOS/FAT/NT Filesystems
    #
    CONFIG_FAT_FS=y
    CONFIG_MSDOS_FS=y
    CONFIG_VFAT_FS=y
    CONFIG_FAT_DEFAULT_CODEPAGE=437
    CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
    CONFIG_NTFS_FS=y
    # CONFIG_NTFS_DEBUG is not set
    # CONFIG_NTFS_RW is not set

    #
    # Pseudo filesystems
    #
    CONFIG_PROC_FS=y
    CONFIG_PROC_KCORE=y
    CONFIG_PROC_SYSCTL=y
    CONFIG_SYSFS=y
    CONFIG_TMPFS=y
    # CONFIG_TMPFS_POSIX_ACL is not set
    # CONFIG_HUGETLBFS is not set
    # CONFIG_HUGETLB_PAGE is not set
    # CONFIG_CONFIGFS_FS is not set

    #
    # Layered filesystems
    #
    # CONFIG_UNION_FS is not set

    #
    # Miscellaneous filesystems
    #
    # CONFIG_ADFS_FS is not set
    # CONFIG_AFFS_FS is not set
    # CONFIG_HFS_FS is not set
    # CONFIG_HFSPLUS_FS is not set
    # CONFIG_BEFS_FS is not set
    # CONFIG_BFS_FS is not set
    # CONFIG_EFS_FS is not set
    # CONFIG_CRAMFS is not set
    # CONFIG_VXFS_FS is not set
    # CONFIG_HPFS_FS is not set
    # CONFIG_QNX4FS_FS is not set
    # CONFIG_SYSV_FS is not set
    # CONFIG_UFS_FS is not set

    #
    # Network File Systems
    #
    # CONFIG_NFS_FS is not set
    # CONFIG_NFSD is not set
    # CONFIG_SMB_FS is not set
    # CONFIG_CIFS is not set
    # CONFIG_NCP_FS is not set
    # CONFIG_CODA_FS is not set
    # CONFIG_AFS_FS is not set

    #
    # Partition Types
    #
    # CONFIG_PARTITION_ADVANCED is not set
    CONFIG_MSDOS_PARTITION=y

    #
    # Native Language Support
    #
    CONFIG_NLS=y
    CONFIG_NLS_DEFAULT="cp437"
    CONFIG_NLS_CODEPAGE_437=y
    # CONFIG_NLS_CODEPAGE_737 is not set
    # CONFIG_NLS_CODEPAGE_775 is not set
    CONFIG_NLS_CODEPAGE_850=y
    # CONFIG_NLS_CODEPAGE_852 is not set
    # CONFIG_NLS_CODEPAGE_855 is not set
    # CONFIG_NLS_CODEPAGE_857 is not set
    # CONFIG_NLS_CODEPAGE_860 is not set
    # CONFIG_NLS_CODEPAGE_861 is not set
    # CONFIG_NLS_CODEPAGE_862 is not set
    # CONFIG_NLS_CODEPAGE_863 is not set
    # CONFIG_NLS_CODEPAGE_864 is not set
    # CONFIG_NLS_CODEPAGE_865 is not set
    # CONFIG_NLS_CODEPAGE_866 is not set
    # CONFIG_NLS_CODEPAGE_869 is not set
    # CONFIG_NLS_CODEPAGE_936 is not set
    # CONFIG_NLS_CODEPAGE_950 is not set
    # CONFIG_NLS_CODEPAGE_932 is not set
    # CONFIG_NLS_CODEPAGE_949 is not set
    # CONFIG_NLS_CODEPAGE_874 is not set
    # CONFIG_NLS_ISO8859_8 is not set
    # CONFIG_NLS_CODEPAGE_1250 is not set
    # CONFIG_NLS_CODEPAGE_1251 is not set
    CONFIG_NLS_ASCII=y
    CONFIG_NLS_ISO8859_1=y
    # CONFIG_NLS_ISO8859_2 is not set
    # CONFIG_NLS_ISO8859_3 is not set
    # CONFIG_NLS_ISO8859_4 is not set
    # CONFIG_NLS_ISO8859_5 is not set
    # CONFIG_NLS_ISO8859_6 is not set
    # CONFIG_NLS_ISO8859_7 is not set
    # CONFIG_NLS_ISO8859_9 is not set
    # CONFIG_NLS_ISO8859_13 is not set
    # CONFIG_NLS_ISO8859_14 is not set
    CONFIG_NLS_ISO8859_15=y
    # CONFIG_NLS_KOI8_R is not set
    # CONFIG_NLS_KOI8_U is not set
    # CONFIG_NLS_UTF8 is not set

    #
    # Distributed Lock Manager
    #
    # CONFIG_DLM is not set

    #
    # Instrumentation Support
    #
    # CONFIG_PROFILING is not set
    # CONFIG_KPROBES is not set

    #
    # Kernel hacking
    #
    CONFIG_TRACE_IRQFLAGS_SUPPORT=y
    # CONFIG_PRINTK_TIME is not set
    CONFIG_ENABLE_MUST_CHECK=y
    CONFIG_MAGIC_SYSRQ=y
    # CONFIG_UNUSED_SYMBOLS is not set
    # CONFIG_PAGE_OWNER is not set
    # CONFIG_DEBUG_FS is not set
    # CONFIG_HEADERS_CHECK is not set
    CONFIG_DEBUG_KERNEL=y
    # CONFIG_DEBUG_SHIRQ is not set
    CONFIG_DETECT_SOFTLOCKUP=y
    CONFIG_SCHED_DEBUG=y
    # CONFIG_SCHEDSTATS is not set
    # CONFIG_TIMER_STATS is not set
    # CONFIG_DEBUG_SLAB is not set
    # CONFIG_DEBUG_RT_MUTEXES is not set
    # CONFIG_RT_MUTEX_TESTER is not set
    # CONFIG_DEBUG_SPINLOCK is not set
    # CONFIG_DEBUG_MUTEXES is not set
    # CONFIG_DEBUG_LOCK_ALLOC is not set
    # CONFIG_PROVE_LOCKING is not set
    # CONFIG_LOCK_STAT is not set
    # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
    # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
    # CONFIG_DEBUG_KOBJECT is not set
    CONFIG_DEBUG_BUGVERBOSE=y
    CONFIG_DEBUG_INFO=y
    # CONFIG_DEBUG_VM is not set
    # CONFIG_DEBUG_LIST is not set
    CONFIG_FRAME_POINTER=y
    # CONFIG_UNWIND_INFO is not set
    # CONFIG_PROFILE_LIKELY is not set
    # CONFIG_FORCED_INLINING is not set
    # CONFIG_BOOT_PRINTK_DELAY is not set
    # CONFIG_DEBUG_SYNCHRO_TEST is not set
    # CONFIG_RCU_TORTURE_TEST is not set
    # CONFIG_FAULT_INJECTION is not set
    # CONFIG_WANT_EXTRA_DEBUG_INFORMATION is not set
    # CONFIG_KGDB is not set
    # CONFIG_KGDB_ATTACH_WAIT is not set
    # CONFIG_DEBUG_RODATA is not set
    # CONFIG_IOMMU_DEBUG is not set
    # CONFIG_DEBUG_STACKOVERFLOW is not set
    # CONFIG_DEBUG_STACK_USAGE is not set

    #
    # Security options
    #
    # CONFIG_KEYS is not set
    # CONFIG_SECURITY is not set
    # CONFIG_SECURITY_FILE_CAPABILITIES is not set
    CONFIG_XOR_BLOCKS=y
    CONFIG_ASYNC_CORE=y
    CONFIG_ASYNC_MEMCPY=y
    CONFIG_ASYNC_XOR=y
    CONFIG_CRYPTO=y
    CONFIG_CRYPTO_ALGAPI=y
    CONFIG_CRYPTO_BLKCIPHER=y
    CONFIG_CRYPTO_HASH=y
    CONFIG_CRYPTO_MANAGER=y
    CONFIG_CRYPTO_HMAC=y
    # CONFIG_CRYPTO_XCBC is not set
    # CONFIG_CRYPTO_NULL is not set
    # CONFIG_CRYPTO_MD4 is not set
    CONFIG_CRYPTO_MD5=y
    CONFIG_CRYPTO_SHA1=y
    # CONFIG_CRYPTO_SHA256 is not set
    # CONFIG_CRYPTO_SHA512 is not set
    # CONFIG_CRYPTO_WP512 is not set
    # CONFIG_CRYPTO_TGR192 is not set
    # CONFIG_CRYPTO_GF128MUL is not set
    # CONFIG_CRYPTO_ECB is not set
    CONFIG_CRYPTO_CBC=y
    # CONFIG_CRYPTO_PCBC is not set
    # CONFIG_CRYPTO_LRW is not set
    # CONFIG_CRYPTO_CRYPTD is not set
    CONFIG_CRYPTO_DES=y
    # CONFIG_CRYPTO_FCRYPT is not set
    # CONFIG_CRYPTO_BLOWFISH is not set
    # CONFIG_CRYPTO_TWOFISH is not set
    # CONFIG_CRYPTO_TWOFISH_X86_64 is not set
    # CONFIG_CRYPTO_SERPENT is not set
    # CONFIG_CRYPTO_AES is not set
    # CONFIG_CRYPTO_AES_X86_64 is not set
    # CONFIG_CRYPTO_CAST5 is not set
    # CONFIG_CRYPTO_CAST6 is not set
    # CONFIG_CRYPTO_TEA is not set
    # CONFIG_CRYPTO_ARC4 is not set
    # CONFIG_CRYPTO_KHAZAD is not set
    # CONFIG_CRYPTO_ANUBIS is not set
    # CONFIG_CRYPTO_SEED is not set
    CONFIG_CRYPTO_DEFLATE=y
    # CONFIG_CRYPTO_MICHAEL_MIC is not set
    # CONFIG_CRYPTO_CRC32C is not set
    # CONFIG_CRYPTO_CAMELLIA is not set
    # CONFIG_CRYPTO_TEST is not set
    # CONFIG_CRYPTO_AUTHENC is not set
    CONFIG_CRYPTO_HW=y

    #
    # Library routines
    #
    CONFIG_BITREVERSE=y
    CONFIG_CRC_CCITT=y
    # CONFIG_CRC16 is not set
    # CONFIG_CRC_ITU_T is not set
    CONFIG_CRC32=y
    # CONFIG_CRC7 is not set
    CONFIG_LIBCRC32C=y
    CONFIG_ZLIB_INFLATE=y
    CONFIG_ZLIB_DEFLATE=y
    CONFIG_TEXTSEARCH=y
    CONFIG_TEXTSEARCH_KMP=m
    CONFIG_TEXTSEARCH_BM=m
    CONFIG_TEXTSEARCH_FSM=m
    CONFIG_PLIST=y
    CONFIG_HAS_IOMEM=y
    CONFIG_HAS_IOPORT=y
    Linux version 2.6.23-rc4-mm1 (jurriaan@middle) (gcc version 4.1.3 20070812 (prerelease) (Debian 4.1.2-15)) #1 SMP Sat Sep 1 08:24:52 CEST 2007
    Command line: root=/dev/md2 video=nvidiafb:1792x1344-32@75 atkbd.softrepeat=1
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009c800 (usable)
    BIOS-e820: 000000000009c800 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 00000000bfff0000 (usable)
    BIOS-e820: 00000000bfff0000 - 00000000bfff3000 (ACPI NVS)
    BIOS-e820: 00000000bfff3000 - 00000000c0000000 (ACPI data)
    BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
    BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
    Entering add_active_range(0, 0, 156) 0 entries of 256 used
    Entering add_active_range(0, 256, 786416) 1 entries of 256 used
    Entering add_active_range(0, 1048576, 1310720) 2 entries of 256 used
    end_pfn_map = 1310720
    DMI 2.3 present.
    ACPI: RSDP 000F7D30, 0014 (r0 Nvidia)
    ACPI: RSDT BFFF3040, 0038 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
    ACPI: FACP BFFF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
    ACPI: DSDT BFFF3180, 6678 (r1 NVIDIA AWRDACPI 1000 MSFT 100000E)
    ACPI: FACS BFFF0000, 0040
    ACPI: SSDT BFFF9900, 020C (r1 PTLTD POWERNOW 1 LTP 1)
    ACPI: SRAT BFFF9B80, 00C8 (r1 AMD HAMMER 1 AMD 1)
    ACPI: MCFG BFFF9CC0, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
    ACPI: APIC BFFF9840, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
    ACPI: Local APIC address 0xfee00000
    Entering add_active_range(0, 0, 156) 0 entries of 256 used
    Entering add_active_range(0, 256, 786416) 1 entries of 256 used
    Entering add_active_range(0, 1048576, 1310720) 2 entries of 256 used
    sizeof(struct page) = 56
    Zone PFN ranges:
    DMA 0 -> 4096
    DMA32 4096 -> 1048576
    Normal 1048576 -> 1310720
    Movable zone start PFN for each node
    early_node_map[3] active PFN ranges
    0: 0 -> 156
    0: 256 -> 786416
    0: 1048576 -> 1310720
    On node 0 totalpages: 1048460
    Node 0 memmap at 0xffff810001000000 size 73400320 first pfn 0xffff810001000000
    DMA zone: 56 pages used for memmap
    DMA zone: 1473 pages reserved
    DMA zone: 2467 pages, LIFO batch:0
    DMA32 zone: 14280 pages used for memmap
    DMA32 zone: 768040 pages, LIFO batch:31
    Normal zone: 3584 pages used for memmap
    Normal zone: 258560 pages, LIFO batch:31
    Movable zone: 0 pages used for memmap
    Nvidia board detected. Ignoring ACPI timer override.
    If you got timer trouble try acpi_use_timer_override
    ACPI: PM-Timer IO Port: 0x4008
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    Processor #0 (Bootup-CPU)
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    Processor #1
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: BIOS IRQ0 pin2 override ignored.
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
    ACPI: IRQ9 used by override.
    ACPI: IRQ14 used by override.
    ACPI: IRQ15 used by override.
    Setting APIC routing to flat
    Using ACPI (MADT) for SMP configuration information
    Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
    SMP: Allowing 2 CPUs, 0 hotplug CPUs
    PERCPU: Allocating 29160 bytes of per cpu data
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1029067
    Kernel command line: root=/dev/md2 video=nvidiafb:1792x1344-32@75 atkbd.softrepeat=1
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 32768 bytes)
    TSC calibrated against PM_TIMER
    Marking TSC unstable due to TSCs unsynchronized
    time.c: Detected 2412.365 MHz processor.
    Console: colour VGA+ 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Checking aperture...
    CPU 0: aperture @ 8000000 size 32 MB
    Aperture too small (32 MB)
    No AGP bridge found
    Your BIOS doesn't leave a aperture memory hole
    Please enable the IOMMU option in the BIOS setup
    This costs you 64 MB of RAM
    Mapping aperture over 65536 KB of RAM @ 8000000
    Memory: 4044140k/5242880k available (3550k kernel code, 149480k reserved, 1431k data, 244k init)
    Calibrating delay using timer specific routine.. 4826.21 BogoMIPS (lpj=2413107)
    Mount-cache hash table entries: 256
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 512K (64 bytes/line)
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    SMP alternatives: switching to UP code
    ACPI: Core revision 20070126
    Using local APIC timer interrupts.
    APIC timer calibration result 12564415
    Detected 12.564 MHz APIC timer.
    SMP alternatives: switching to SMP code
    Booting processor 1/2 APIC 0x1
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 4824.65 BogoMIPS (lpj=2412326)
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 512K (64 bytes/line)
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 1
    AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 01
    Brought up 2 CPUs
    xor: automatically using best checksumming function: generic_sse
    generic_sse: 7704.000 MB/sec
    xor: using function: generic_sse (7704.000 MB/sec)
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: Using configuration type 1
    ACPI: EC: Look up EC in DSDT
    ACPI: Interpreter enabled
    ACPI: (supports S0 S1 S3)
    ACPI: Using IOAPIC for interrupt routing
    PCI: MCFG configuration 0: base 3758096384 segment 0 buses 0 - 255
    PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
    PCI: Using MMCONFIG at e0000000 - efffffff
    PCI: No mmconfig possible on device 00:18
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: Probing PCI hardware (bus 00)
    PCI: Transparent bridge - 0000:00:09.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
    ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 7 9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 *5 7 9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNK3] (IRQs *3 4 5 7 9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LUBA] (IRQs *3 4 5 7 9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
    ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
    ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
    ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
    ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
    ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
    ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
    ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
    ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
    ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
    ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
    ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
    ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 16 devices
    ACPI: ACPI bus type pnp unregistered
    Generic PHY: Registered new driver
    SCSI subsystem initialized
    libata version 2.21 loaded.
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    DMAR:No DMAR devices found
    PCI-DMA: Disabling AGP.
    PCI-DMA: aperture base @ 8000000 size 65536 KB
    PCI-DMA: using GART IOMMU.
    PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
    ACPI: RTC can wake from S4
    pnp: 00:01: ioport range 0x4000-0x407f has been reserved
    pnp: 00:01: ioport range 0x4080-0x40ff has been reserved
    pnp: 00:01: ioport range 0x4400-0x447f has been reserved
    pnp: 00:01: ioport range 0x4480-0x44ff has been reserved
    pnp: 00:01: ioport range 0x4800-0x487f has been reserved
    pnp: 00:01: ioport range 0x4880-0x48ff has been reserved
    pnp: 00:01: iomem range 0x0-0x0 could not be reserved
    pnp: 00:0e: iomem range 0xe0000000-0xefffffff could not be reserved
    pnp: 00:0f: iomem range 0xf0000-0xf3fff could not be reserved
    pnp: 00:0f: iomem range 0xf4000-0xf7fff could not be reserved
    pnp: 00:0f: iomem range 0xf8000-0xfbfff could not be reserved
    pnp: 00:0f: iomem range 0xfc000-0xfffff could not be reserved
    ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
    ACPI: PCI Interrupt 0000:05:08.2[B] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
    ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[d400e000-d400e7ff] Max Packet=[2048] IR/IT contexts=[4/8]
    ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
    ACPI: PCI Interrupt 0000:05:0b.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16
    ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[d400d000-d400d7ff] Max Packet=[2048] IR/IT contexts=[4/8]
    PCI: Bridge: 0000:00:09.0
    IO window: 5000-9fff
    Time: acpi_pm clocksource has been installed.
    Switched to high resolution mode on CPU 0
    MEM window: d3000000-d4ffffff
    Switched to high resolution mode on CPU 1
    PREFETCH window: d5100000-d51fffff
    PCI: Bridge: 0000:00:0b.0
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:0c.0
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:0d.0
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:0e.0
    IO window: a000-afff
    MEM window: d0000000-d2ffffff
    PREFETCH window: c0000000-cfffffff
    PCI: Setting latency timer of device 0000:00:09.0 to 64
    PCI: Setting latency timer of device 0000:00:0b.0 to 64
    PCI: Setting latency timer of device 0000:00:0c.0 to 64
    PCI: Setting latency timer of device 0000:00:0d.0 to 64
    PCI: Setting latency timer of device 0000:00:0e.0 to 64
    NET: Registered protocol family 2
    IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
    TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    NTFS driver 2.1.28 [Flags: R/O].
    async_tx: api initialized (sync-only)
    io scheduler noop registered
    io scheduler anticipatory registered (default)
    io scheduler deadline registered
    io scheduler cfq registered
    PCI: Found disabled HT MSI Mapping on 0000:00:0b.0
    PCI: Found enabled HT MSI Mapping on 0000:00:00.0
    PCI: Linking AER extended capability on 0000:00:0b.0
    PCI: Found disabled HT MSI Mapping on 0000:00:0c.0
    PCI: Found enabled HT MSI Mapping on 0000:00:00.0
    PCI: Linking AER extended capability on 0000:00:0c.0
    PCI: Found disabled HT MSI Mapping on 0000:00:0d.0
    PCI: Found enabled HT MSI Mapping on 0000:00:00.0
    PCI: Linking AER extended capability on 0000:00:0d.0
    PCI: Found disabled HT MSI Mapping on 0000:00:0e.0
    PCI: Found enabled HT MSI Mapping on 0000:00:00.0
    PCI: Linking AER extended capability on 0000:00:0e.0
    Boot video device is 0000:01:00.0
    PCI: Setting latency timer of device 0000:00:0b.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:0b.0:pcie00]
    Allocate Port Service[0000:00:0b.0:pcie03]
    PCI: Setting latency timer of device 0000:00:0c.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:0c.0:pcie00]
    Allocate Port Service[0000:00:0c.0:pcie03]
    PCI: Setting latency timer of device 0000:00:0d.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:0d.0:pcie00]
    Allocate Port Service[0000:00:0d.0:pcie03]
    PCI: Setting latency timer of device 0000:00:0e.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:0e.0:pcie00]
    Allocate Port Service[0000:00:0e.0:pcie03]
    ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
    ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
    nvidiafb: Device ID: 10de0392
    nvidiafb: CRTC0 analog found
    nvidiafb: CRTC1 analog not found
    nvidiafb: EDID found from BUS1
    i2c-adapter i2c-1: unable to read EDID block.
    i2c-adapter i2c-1: unable to read EDID block.
    i2c-adapter i2c-1: unable to read EDID block.
    nvidiafb: CRTC 0 appears to have a CRT attached
    nvidiafb: Using CRT on CRTC 0
    nvidiafb: MTRR set to ON
    Console: switching to colour frame buffer device 185x77
    nvidiafb: PCI nVidia NV39 framebuffer (64MB @ 0xC0000000)
    input: Power Button (FF) as /class/input/input0
    ACPI: Power Button (FF) [PWRF]
    input: Power Button (CM) as /class/input/input1
    ACPI: Power Button (CM) [PWRB]
    ACPI: Fan [FAN] (on)
    ACPI: Thermal Zone [THRM] (40 C)
    Real Time Clock Driver v1.12ac
    Non-volatile memory driver v1.2
    Linux agpgart interface v0.102
    Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
    Hangcheck: Using get_cycles().
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    Floppy drive(s): fd0 is 1.44M
    FDC 0 is a post-1991 82077
    loop: module loaded
    ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
    ACPI: PCI Interrupt 0000:05:0c.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17
    skge 1.11 addr 0xd4008000 irq 17 chip Yukon-Lite rev 9
    skge eth0: addr 00:15:f2:20:e6:69
    Marvell 88E1101: Registered new driver
    Marvell 88E1112: Registered new driver
    Marvell 88E1111: Registered new driver
    Marvell 88E1145: Registered new driver
    Davicom DM9161E: Registered new driver
    Davicom DM9161A: Registered new driver
    Davicom DM9131: Registered new driver
    Cicada Cis8204: Registered new driver
    Cicada Cis8201: Registered new driver
    LXT970: Registered new driver
    LXT971: Registered new driver
    QS6612: Registered new driver
    forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
    ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
    ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 23
    PCI: Setting latency timer of device 0000:00:0a.0 to 64
    forcedeth: using HIGHDMA
    ieee1394: Host added: ID:BUS[0-01:1023] GUID[00023c014100f4bf]
    ieee1394: Host added: ID:BUS[1-00:1023] GUID[0011d80000738f5d]
    eth1: forcedeth.c: subsystem: 01043:8141 bound to 0000:00:0a.0
    Linux Tulip driver version 1.1.15 (Feb 27, 2007)
    ACPI: PCI Interrupt 0000:05:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17
    tulip0: MII transceiver #1 config 3100 status 7829 advertising 01e1.
    eth2: Lite-On 82c168 PNIC rev 32 at Port 0x7800, 00:A0:CC:21:89:0C, IRQ 17.
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
    NFORCE-CK804: chipset revision 242
    NFORCE-CK804: not 100% native mode: will probe irqs later
    NFORCE-CK804: BIOS didn't set cable bits correctly. Enabling workaround.
    NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
    Probing IDE interface ide0...
    hdb: _NEC DVD_RW ND-3540A, ATAPI CD/DVD-ROM drive
    hda: WDC WD2000JB-32EVA0, ATA DISK drive
    hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
    hda: selected mode 0x45
    hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
    hdb: selected mode 0x42
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    Probing IDE interface ide1...
    hdc: WDC WD2000JB-00FUA0, ATA DISK drive
    hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
    hdc: selected mode 0x45
    ide1 at 0x170-0x177,0x376 on irq 15
    HPT374: IDE controller at PCI slot 0000:05:06.0
    ACPI: PCI Interrupt 0000:05:06.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16
    HPT374: chipset revision 7
    HPT374: DPLL base: 48 MHz, f_CNT: 148, assuming 33 MHz PCI
    HPT374: using 50 MHz DPLL clock
    HPT374: 100% native mode on irq 16
    ide2: BM-DMA at 0x6000-0x6007, BIOS settings: hde:DMA, hdf:pio
    ide3: BM-DMA at 0x6008-0x600f, BIOS settings: hdg:pio, hdh:pio
    ACPI: PCI Interrupt 0000:05:06.1[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16
    HPT374: DPLL base: 48 MHz, f_CNT: 148, assuming 33 MHz PCI
    HPT374: using 50 MHz DPLL clock
    ide4: BM-DMA at 0x7400-0x7407, BIOS settings: hdi:DMA, hdj:pio
    ide5: BM-DMA at 0x7408-0x740f, BIOS settings: hdk:pio, hdl:pio
    Probing IDE interface ide2...
    hde: WDC WD2500JB-00FUA0, ATA DISK drive
    hde: host max PIO4 wanted PIO255(auto-tune) selected PIO4
    hde: selected mode 0x45
    ide2 at 0x5000-0x5007,0x5402 on irq 16
    Probing IDE interface ide3...
    Probing IDE interface ide4...
    hdi: ST3300831A, ATA DISK drive
    hdi: host max PIO4 wanted PIO255(auto-tune) selected PIO4
    hdi: selected mode 0x45
    ide4 at 0x6400-0x6407,0x6802 on irq 16
    Probing IDE interface ide5...
    hda: max request size: 512KiB
    hda: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100)
    hda: cache flushes supported
    hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 >
    hdc: max request size: 512KiB
    hdc: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100)
    hdc: cache flushes supported
    hdc: hdc1 hdc2 < hdc5 hdc6 hdc7 hdc8 hdc9 >
    hde: max request size: 512KiB
    hde: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(100)
    hde: cache flushes supported
    hde: hde1
    hdi: max request size: 512KiB
    hdi: 586072368 sectors (300069 MB) w/8192KiB Cache, CHS=36481/255/63, UDMA(100)
    hdi: cache flushes supported
    hdi: hdi1
    hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
    Uniform CD-ROM driver Revision: 3.20
    sata_sil 0000:05:0a.0: version 2.3
    ACPI: PCI Interrupt 0000:05:0a.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
    sata_sil 0000:05:0a.0: Applying R_ERR on DMA activate FIS errata fix
    scsi0 : sata_sil
    scsi1 : sata_sil
    scsi2 : sata_sil
    scsi3 : sata_sil
    ata1: SATA max UDMA/100 mmio m1024@0xd400c000 tf 0xd400c080 irq 19
    ata2: SATA max UDMA/100 mmio m1024@0xd400c000 tf 0xd400c0c0 irq 19
    ata3: SATA max UDMA/100 mmio m1024@0xd400c000 tf 0xd400c280 irq 19
    ata4: SATA max UDMA/100 mmio m1024@0xd400c000 tf 0xd400c2c0 irq 19
    ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata1.00: ATA-7: ST3750640AS, 3.AAE, max UDMA/133
    ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    ata1.00: configured for UDMA/100
    ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata2.00: ATA-7: ST3750640AS, 3.AAE, max UDMA/133
    ata2.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    ata2.00: configured for UDMA/100
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: ATA-7: ST3750640AS, 3.AAE, max UDMA/133
    ata3.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    ata3.00: configured for UDMA/100
    ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata4.00: ATA-7: ST3750640AS, 3.AAE, max UDMA/133
    ata4.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    ata4.00: configured for UDMA/100
    scsi 0:0:0:0: Direct-Access ATA ST3750640AS 3.AA PQ: 0 ANSI: 5
    sd 0:0:0:0: [sda] 1465149168 512-byte hardware sectors (750156 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 0:0:0:0: [sda] 1465149168 512-byte hardware sectors (750156 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3
    sd 0:0:0:0: [sda] Attached SCSI disk
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    scsi 1:0:0:0: Direct-Access ATA ST3750640AS 3.AA PQ: 0 ANSI: 5
    sd 1:0:0:0: [sdb] 1465149168 512-byte hardware sectors (750156 MB)
    sd 1:0:0:0: [sdb] Write Protect is off
    sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 1:0:0:0: [sdb] 1465149168 512-byte hardware sectors (750156 MB)
    sd 1:0:0:0: [sdb] Write Protect is off
    sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sdb: sdb1 sdb2 sdb3
    sd 1:0:0:0: [sdb] Attached SCSI disk
    sd 1:0:0:0: Attached scsi generic sg1 type 0
    scsi 2:0:0:0: Direct-Access ATA ST3750640AS 3.AA PQ: 0 ANSI: 5
    sd 2:0:0:0: [sdc] 1465149168 512-byte hardware sectors (750156 MB)
    sd 2:0:0:0: [sdc] Write Protect is off
    sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
    sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 2:0:0:0: [sdc] 1465149168 512-byte hardware sectors (750156 MB)
    sd 2:0:0:0: [sdc] Write Protect is off
    sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
    sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sdc: sdc1 sdc2 sdc3
    sd 2:0:0:0: [sdc] Attached SCSI disk
    sd 2:0:0:0: Attached scsi generic sg2 type 0
    scsi 3:0:0:0: Direct-Access ATA ST3750640AS 3.AA PQ: 0 ANSI: 5
    sd 3:0:0:0: [sdd] 1465149168 512-byte hardware sectors (750156 MB)
    sd 3:0:0:0: [sdd] Write Protect is off
    sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
    sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 3:0:0:0: [sdd] 1465149168 512-byte hardware sectors (750156 MB)
    sd 3:0:0:0: [sdd] Write Protect is off
    sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
    sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sdd: sdd1 sdd2 sdd3
    sd 3:0:0:0: [sdd] Attached SCSI disk
    sd 3:0:0:0: Attached scsi generic sg3 type 0
    sata_nv 0000:00:07.0: version 3.5
    ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22
    ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 22 (level, low) -> IRQ 22
    sata_nv 0000:00:07.0: Using ADMA mode
    PCI: Setting latency timer of device 0000:00:07.0 to 64
    scsi4 : sata_nv
    scsi5 : sata_nv
    ata5: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 22
    ata6: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 22
    ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    ata5.00: ATA-7: ST3750640AS, 3.AAE, max UDMA/133
    ata5.00: 1465149168 sectors, multi 1: LBA48 NCQ (depth 31/32)
    ata5.00: configured for UDMA/133
    ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    ata6.00: ATA-7: ST3750640AS, 3.AAE, max UDMA/133
    ata6.00: 1465149168 sectors, multi 1: LBA48 NCQ (depth 31/32)
    ata6.00: configured for UDMA/133
    scsi 4:0:0:0: Direct-Access ATA ST3750640AS 3.AA PQ: 0 ANSI: 5
    ata5: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
    sd 4:0:0:0: [sde] 1465149168 512-byte hardware sectors (750156 MB)
    sd 4:0:0:0: [sde] Write Protect is off
    sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
    sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 4:0:0:0: [sde] 1465149168 512-byte hardware sectors (750156 MB)
    sd 4:0:0:0: [sde] Write Protect is off
    sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
    sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sde: sde1 sde2 sde3
    sd 4:0:0:0: [sde] Attached SCSI disk
    sd 4:0:0:0: Attached scsi generic sg4 type 0
    scsi 5:0:0:0: Direct-Access ATA ST3750640AS 3.AA PQ: 0 ANSI: 5
    ata6: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
    sd 5:0:0:0: [sdf] 1465149168 512-byte hardware sectors (750156 MB)
    sd 5:0:0:0: [sdf] Write Protect is off
    sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
    sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 5:0:0:0: [sdf] 1465149168 512-byte hardware sectors (750156 MB)
    sd 5:0:0:0: [sdf] Write Protect is off
    sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
    sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sdf: sdf1 sdf2 sdf3
    sd 5:0:0:0: [sdf] Attached SCSI disk
    sd 5:0:0:0: Attached scsi generic sg5 type 0
    ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 21
    ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 21 (level, low) -> IRQ 21
    sata_nv 0000:00:08.0: Using ADMA mode
    PCI: Setting latency timer of device 0000:00:08.0 to 64
    scsi6 : sata_nv
    scsi7 : sata_nv
    ata7: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 21
    ata8: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 21
    ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    ata7.00: ATA-7: ST3750640AS, 3.AAE, max UDMA/133
    ata7.00: 1465149168 sectors, multi 1: LBA48 NCQ (depth 31/32)
    ata7.00: configured for UDMA/133
    ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    ata8.00: ATA-7: ST3750640AS, 3.AAE, max UDMA/133
    ata8.00: 1465149168 sectors, multi 1: LBA48 NCQ (depth 31/32)
    ata8.00: configured for UDMA/133
    scsi 6:0:0:0: Direct-Access ATA ST3750640AS 3.AA PQ: 0 ANSI: 5
    ata7: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
    sd 6:0:0:0: [sdg] 1465149168 512-byte hardware sectors (750156 MB)
    sd 6:0:0:0: [sdg] Write Protect is off
    sd 6:0:0:0: [sdg] Mode Sense: 00 3a 00 00
    sd 6:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 6:0:0:0: [sdg] 1465149168 512-byte hardware sectors (750156 MB)
    sd 6:0:0:0: [sdg] Write Protect is off
    sd 6:0:0:0: [sdg] Mode Sense: 00 3a 00 00
    sd 6:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sdg: sdg1 sdg2 sdg3
    sd 6:0:0:0: [sdg] Attached SCSI disk
    sd 6:0:0:0: Attached scsi generic sg6 type 0
    scsi 7:0:0:0: Direct-Access ATA ST3750640AS 3.AA PQ: 0 ANSI: 5
    ata8: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
    sd 7:0:0:0: [sdh] 1465149168 512-byte hardware sectors (750156 MB)
    sd 7:0:0:0: [sdh] Write Protect is off
    sd 7:0:0:0: [sdh] Mode Sense: 00 3a 00 00
    sd 7:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 7:0:0:0: [sdh] 1465149168 512-byte hardware sectors (750156 MB)
    sd 7:0:0:0: [sdh] Write Protect is off
    sd 7:0:0:0: [sdh] Mode Sense: 00 3a 00 00
    sd 7:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sdh: sdh1 sdh2 sdh3
    sd 7:0:0:0: [sdh] Attached SCSI disk
    sd 7:0:0:0: Attached scsi generic sg7 type 0
    video1394: Installed video1394 module
    ieee1394: raw1394: /dev/raw1394 device initialized
    NOTE: The dv1394 driver is unsupported and may be removed in a future Linux release. Use raw1394 instead.
    ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
    ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 20 (level, low) -> IRQ 20
    PCI: Setting latency timer of device 0000:00:02.1 to 64
    ehci_hcd 0000:00:02.1: EHCI Host Controller
    ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:02.1: debug port 1
    PCI: cache line size of 64 is not supported by device 0000:00:02.1
    ehci_hcd 0000:00:02.1: irq 20, io mem 0xfeb00000
    ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 10 ports detected
    usb usb1: new device found, idVendor=0000, idProduct=0000
    usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb1: Product: EHCI Host Controller
    usb usb1: Manufacturer: Linux 2.6.23-rc4-mm1 ehci_hcd
    usb usb1: SerialNumber: 0000:00:02.1
    ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
    ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
    ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23
    PCI: Setting latency timer of device 0000:00:02.0 to 64
    ohci_hcd 0000:00:02.0: OHCI Host Controller
    ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
    ohci_hcd 0000:00:02.0: irq 23, io mem 0xd5004000
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 10 ports detected
    usb usb2: new device found, idVendor=0000, idProduct=0000
    usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb2: Product: OHCI Host Controller
    usb usb2: Manufacturer: Linux 2.6.23-rc4-mm1 ohci_hcd
    usb usb2: SerialNumber: 0000:00:02.0
    usbcore: registered new interface driver usblp
    PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    input: AT Translated Set 2 keyboard as /class/input/input2
    input: PC Speaker as /class/input/input3
    input: ImPS/2 Logitech Wheel Mouse as /class/input/input4
    i2c /dev entries driver
    md: linear personality registered for level -1
    md: raid0 personality registered for level 0
    md: raid1 personality registered for level 1
    md: raid10 personality registered for level 10
    raid6: int64x1 2199 MB/s
    raid6: int64x2 2980 MB/s
    raid6: int64x4 3167 MB/s
    raid6: int64x8 1992 MB/s
    raid6: sse2x1 2339 MB/s
    raid6: sse2x2 3312 MB/s
    raid6: sse2x4 4097 MB/s
    raid6: using algorithm sse2x4 (4097 MB/s)
    md: raid6 personality registered for level 6
    md: raid5 personality registered for level 5
    md: raid4 personality registered for level 4
    EDAC MC: Ver: 2.1.0 Sep 1 2007
    cpuidle: using governor ladder
    cpuidle: using governor menu
    GACT probability on
    Mirror/redirect action on
    nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
    IPv4 over IPv4 tunneling driver
    GRE over IPv4 tunneling driver
    TCP cubic registered
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    NET: Registered protocol family 15
    powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ processors (2 cpu cores) (version 2.00.00)
    powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0x8
    powernow-k8: 1 : fid 0xe (2200 MHz), vid 0xa
    powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xc
    powernow-k8: 3 : fid 0xa (1800 MHz), vid 0xe
    powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12
    drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
    md: Autodetecting RAID arrays.
    md: Scanned 34 and added 34 devices.
    md: autorun ...
    md: considering sdh3 ...
    md: adding sdh3 ...
    md: sdh2 has different UUID to sdh3
    md: sdh1 has different UUID to sdh3
    md: adding sdg3 ...
    md: sdg2 has different UUID to sdh3
    md: sdg1 has different UUID to sdh3
    md: adding sdf3 ...
    md: sdf2 has different UUID to sdh3
    md: sdf1 has different UUID to sdh3
    md: adding sde3 ...
    md: sde2 has different UUID to sdh3
    md: sde1 has different UUID to sdh3
    md: adding sdd3 ...
    md: sdd2 has different UUID to sdh3
    md: sdd1 has different UUID to sdh3
    md: adding sdc3 ...
    md: sdc2 has different UUID to sdh3
    md: sdc1 has different UUID to sdh3
    md: adding sdb3 ...
    md: sdb2 has different UUID to sdh3
    md: sdb1 has different UUID to sdh3
    md: adding sda3 ...
    md: sda2 has different UUID to sdh3
    md: sda1 has different UUID to sdh3
    md: hdc9 has different UUID to sdh3
    md: hdc8 has different UUID to sdh3
    md: hdc7 has different UUID to sdh3
    md: hdc6 has different UUID to sdh3
    md: hdc5 has different UUID to sdh3
    md: hda9 has different UUID to sdh3
    md: hda8 has different UUID to sdh3
    md: hda7 has different UUID to sdh3
    md: hda6 has different UUID to sdh3
    md: hda5 has different UUID to sdh3
    md: created md7
    md: bind<sda3>
    md: bind<sdb3>
    md: bind<sdc3>
    md: bind<sdd3>
    md: bind<sde3>
    md: bind<sdf3>
    md: bind<sdg3>
    md: bind<sdh3>
    md: running: <sdh3><sdg3><sdf3><sde3><sdd3><sdc3><sdb3><sda3>
    raid5: device sdh3 operational as raid disk 7
    raid5: device sdg3 operational as raid disk 6
    raid5: device sdf3 operational as raid disk 5
    raid5: device sde3 operational as raid disk 4
    raid5: device sdd3 operational as raid disk 3
    raid5: device sdc3 operational as raid disk 2
    raid5: device sdb3 operational as raid disk 1
    raid5: device sda3 operational as raid disk 0
    raid5: allocated 8474kB for md7
    raid5: raid level 6 set md7 active with 8 out of 8 devices, algorithm 2
    RAID5 conf printout:
    --- rd:8 wd:8
    disk 0, o:1, dev:sda3
    disk 1, o:1, dev:sdb3
    disk 2, o:1, dev:sdc3
    disk 3, o:1, dev:sdd3
    disk 4, o:1, dev:sde3
    disk 5, o:1, dev:sdf3
    disk 6, o:1, dev:sdg3
    disk 7, o:1, dev:sdh3
    md: considering sdh2 ...
    md: adding sdh2 ...
    md: sdh1 has different UUID to sdh2
    md: adding sdg2 ...
    md: sdg1 has different UUID to sdh2
    md: adding sdf2 ...
    md: sdf1 has different UUID to sdh2
    md: adding sde2 ...
    md: sde1 has different UUID to sdh2
    md: adding sdd2 ...
    md: sdd1 has different UUID to sdh2
    md: adding sdc2 ...
    md: sdc1 has different UUID to sdh2
    md: adding sdb2 ...
    md: sdb1 has different UUID to sdh2
    md: adding sda2 ...
    md: sda1 has different UUID to sdh2
    md: hdc9 has different UUID to sdh2
    md: hdc8 has different UUID to sdh2
    md: hdc7 has different UUID to sdh2
    md: hdc6 has different UUID to sdh2
    md: hdc5 has different UUID to sdh2
    md: hda9 has different UUID to sdh2
    md: hda8 has different UUID to sdh2
    md: hda7 has different UUID to sdh2
    md: hda6 has different UUID to sdh2
    md: hda5 has different UUID to sdh2
    md: created md6
    md: bind<sda2>
    md: bind<sdb2>
    md: bind<sdc2>
    md: bind<sdd2>
    md: bind<sde2>
    md: bind<sdf2>
    md: bind<sdg2>
    md: bind<sdh2>
    md: running: <sdh2><sdg2><sdf2><sde2><sdd2><sdc2><sdb2><sda2>
    raid5: device sdh2 operational as raid disk 7
    raid5: device sdg2 operational as raid disk 6
    raid5: device sdf2 operational as raid disk 5
    raid5: device sde2 operational as raid disk 4
    raid5: device sdd2 operational as raid disk 3
    raid5: device sdc2 operational as raid disk 2
    raid5: device sdb2 operational as raid disk 1
    raid5: device sda2 operational as raid disk 0
    raid5: allocated 8474kB for md6
    raid5: raid level 6 set md6 active with 8 out of 8 devices, algorithm 2
    RAID5 conf printout:
    --- rd:8 wd:8
    disk 0, o:1, dev:sda2
    disk 1, o:1, dev:sdb2
    disk 2, o:1, dev:sdc2
    disk 3, o:1, dev:sdd2
    disk 4, o:1, dev:sde2
    disk 5, o:1, dev:sdf2
    disk 6, o:1, dev:sdg2
    disk 7, o:1, dev:sdh2
    md: considering sdh1 ...
    md: adding sdh1 ...
    md: adding sdg1 ...
    md: adding sdf1 ...
    md: adding sde1 ...
    md: adding sdd1 ...
    md: adding sdc1 ...
    md: adding sdb1 ...
    md: adding sda1 ...
    md: hdc9 has different UUID to sdh1
    md: hdc8 has different UUID to sdh1
    md: hdc7 has different UUID to sdh1
    md: hdc6 has different UUID to sdh1
    md: hdc5 has different UUID to sdh1
    md: hda9 has different UUID to sdh1
    md: hda8 has different UUID to sdh1
    md: hda7 has different UUID to sdh1
    md: hda6 has different UUID to sdh1
    md: hda5 has different UUID to sdh1
    md: created md0
    md: bind<sda1>
    md: bind<sdb1>
    md: bind<sdc1>
    md: bind<sdd1>
    md: bind<sde1>
    md: bind<sdf1>
    md: bind<sdg1>
    md: bind<sdh1>
    md: running: <sdh1><sdg1><sdf1><sde1><sdd1><sdc1><sdb1><sda1>
    raid5: device sdh1 operational as raid disk 7
    raid5: device sdg1 operational as raid disk 6
    raid5: device sdf1 operational as raid disk 5
    raid5: device sde1 operational as raid disk 4
    raid5: device sdd1 operational as raid disk 3
    raid5: device sdc1 operational as raid disk 2
    raid5: device sdb1 operational as raid disk 1
    raid5: device sda1 operational as raid disk 0
    raid5: allocated 8474kB for md0
    raid5: raid level 6 set md0 active with 8 out of 8 devices, algorithm 2
    RAID5 conf printout:
    --- rd:8 wd:8
    disk 0, o:1, dev:sda1
    disk 1, o:1, dev:sdb1
    disk 2, o:1, dev:sdc1
    disk 3, o:1, dev:sdd1
    disk 4, o:1, dev:sde1
    disk 5, o:1, dev:sdf1
    disk 6, o:1, dev:sdg1
    disk 7, o:1, dev:sdh1
    md: considering hdc9 ...
    md: adding hdc9 ...
    md: hdc8 has different UUID to hdc9
    md: hdc7 has different UUID to hdc9
    md: hdc6 has different UUID to hdc9
    md: hdc5 has different UUID to hdc9
    md: adding hda9 ...
    md: hda8 has different UUID to hdc9
    md: hda7 has different UUID to hdc9
    md: hda6 has different UUID to hdc9
    md: hda5 has different UUID to hdc9
    md: created md4
    md: bind<hda9>
    md: bind<hdc9>
    md: running: <hdc9><hda9>
    raid1: raid set md4 active with 2 out of 2 mirrors
    md4: bitmap initialized from disk: read 10/10 pages, set 66 bits
    created bitmap (156 pages) for device md4
    md: considering hdc8 ...
    md: adding hdc8 ...
    md: hdc7 has different UUID to hdc8
    md: hdc6 has different UUID to hdc8
    md: hdc5 has different UUID to hdc8
    md: adding hda8 ...
    md: hda7 has different UUID to hdc8
    md: hda6 has different UUID to hdc8
    md: hda5 has different UUID to hdc8
    md: created md3
    md: bind<hda8>
    md: bind<hdc8>
    md: running: <hdc8><hda8>
    raid1: raid set md3 active with 2 out of 2 mirrors
    md3: bitmap initialized from disk: read 8/8 pages, set 6 bits
    created bitmap (123 pages) for device md3
    md: considering hdc7 ...
    md: adding hdc7 ...
    md: hdc6 has different UUID to hdc7
    md: hdc5 has different UUID to hdc7
    md: adding hda7 ...
    md: hda6 has different UUID to hdc7
    md: hda5 has different UUID to hdc7
    md: created md2
    md: bind<hda7>
    md: bind<hdc7>
    md: running: <hdc7><hda7>
    raid1: raid set md2 active with 2 out of 2 mirrors
    md2: bitmap initialized from disk: read 8/8 pages, set 105 bits
    created bitmap (123 pages) for device md2
    md: considering hdc6 ...
    md: adding hdc6 ...
    md: hdc5 has different UUID to hdc6
    md: adding hda6 ...
    md: hda5 has different UUID to hdc6
    md: created md1
    md: bind<hda6>
    md: bind<hdc6>
    md: running: <hdc6><hda6>
    raid1: raid set md1 active with 2 out of 2 mirrors
    md1: bitmap initialized from disk: read 12/12 pages, set 77 bits
    created bitmap (184 pages) for device md1
    md: considering hdc5 ...
    md: adding hdc5 ...
    md: adding hda5 ...
    md: created md5
    md: bind<hda5>
    md: bind<hdc5>
    md: running: <hdc5><hda5>
    raid1: raid set md5 active with 2 out of 2 mirrors
    md5: bitmap initialized from disk: read 9/9 pages, set 0 bits
    created bitmap (129 pages) for device md5
    md: ... autorun DONE.
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    VFS: Mounted root (ext3 filesystem) readonly.
    Freeing unused kernel memory: 244k freed
    Adding 4200888k swap on /dev/md5. Priority:-1 extents:1 across:4200888k
    EXT3 FS on md2, internal journal
    i2c-adapter i2c-3: nForce2 SMBus adapter at 0x4c00
    i2c-adapter i2c-4: nForce2 SMBus adapter at 0x4c40
    it87: Found IT8712F chip at 0x290, revision 7
    it87: in3 is VCC (+5V)
    it87: in7 is VCCH (+5V Stand-By)
    it87 it87.656: Detected broken BIOS defaults, disabling PWM interface
    ACPI: PCI Interrupt 0000:05:08.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
    Installing spdif_bug patch: Audigy 2 ZS [2001]
    kjournald starting. Commit interval 5 seconds
    EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
    EXT3 FS on md1, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
    EXT3 FS on md3, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    ReiserFS: md4: found reiserfs format "3.6" with standard journal
    ReiserFS: md4: using ordered data mode
    ReiserFS: md4: journal params: device md4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    ReiserFS: md4: checking transaction log (md4)
    ReiserFS: md4: Using r5 hash to sort names
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on md0, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on md6, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on md7, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
    EXT3 FS on hdi1, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    ReiserFS: hde1: found reiserfs format "3.6" with standard journal
    ReiserFS: hde1: using ordered data mode
    ReiserFS: hde1: journal params: device hde1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    ReiserFS: hde1: checking transaction log (hde1)
    ReiserFS: hde1: Using r5 hash to sort names
    eth1 renamed to switch
    net switch: device_rename: sysfs_create_symlink failed (-17)
    eth2 renamed to adsl
    net adsl: device_rename: sysfs_create_symlink failed (-17)
    ip_tables: (C) 2000-2006 Netfilter Core Team
    adsl: Setting full-duplex based on MII#1 link partner capability of 05e1.
    --
    The frightened are ever keen to bow to a perceived necessity, in the believe
    that necessity forces conformity, and conformity a certain stability. In a
    world shaped into conformity, dissidents stand out, are easily branded and
    dealt with. There is no multidude of perspectives, no dialogue. The victim
    assumes the face of the tyrant, self-righteous and intransigent, and wars
    breed like vermin. And people die.
    Steven Erikson - Midnight Tides
    Debian (Unstable) GNU/Linux 2.6.23-rc1-mm2 2x3619 bogomips load 0.91
    the Jack Vance Integral Edition: http://www.integralarchive.org
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2007-09-01 20:25    [W:0.199 / U:120.096 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site