lkml.org 
[lkml]   [2007]   [Jul]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[rft] Kill junk from s2ram resume paths
Hi!

This removes some stale debugging infrastructure from s2ram
paths. Also, there's no need to verify_cpu on x86-64 -- cpu can't
change during s2ram, and removed #if 0-ed code. Some testing would be
useful, perpahs it will even fix someone's machine :-). (VGA accesses
could theoretically hurt if vga is not present / if it is in some
strange state).

Signed-off-by: Pavel Machek <pavel@suse.cz>

diff --git a/arch/i386/kernel/acpi/wakeup.S b/arch/i386/kernel/acpi/wakeup.S
index 1415da1..9719bd6 100644
--- a/arch/i386/kernel/acpi/wakeup.S
+++ b/arch/i386/kernel/acpi/wakeup.S
@@ -53,9 +38,6 @@ wakeup_code:
# Uncomment this to make your computer start producing ugly noise as soon
# as BIOS returns to this real-mode entry point.
# BEEP
- movw $0xb800, %ax
- movw %ax,%fs
- movw $0x0e00 + 'L', %fs:(0x10)

cli
cld
@@ -70,7 +52,6 @@ # BEEP
BEEP
1:
mov $(wakeup_stack - wakeup_code), %sp # Private stack is needed for ASUS board
- movw $0x0e00 + 'S', %fs:(0x12)

pushl $0 # Kill any dangerous flags
popfl
@@ -108,9 +89,6 @@ # BEEP
# make sure %cr4 is set correctly (features, etc)
movl real_save_cr4 - wakeup_code, %eax
movl %eax, %cr4
- movw $0xb800, %ax
- movw %ax,%fs
- movw $0x0e00 + 'i', %fs:(0x12)

# need a gdt -- use lgdtl to force 32-bit operands, in case
# the GDT is located past 16 megabytes.
@@ -120,8 +98,6 @@ # BEEP
movl %eax, %cr0
jmp 1f
1:
- movw $0x0e00 + 'n', %fs:(0x14)
-
movl real_magic - wakeup_code, %eax
cmpl $0x12345678, %eax
jne bogus_real_magic
@@ -145,7 +121,6 @@ real_save_efer_edx: .long 0
real_save_efer_eax: .long 0

bogus_real_magic:
- movw $0x0e00 + 'B', %fs:(0x12)
jmp bogus_real_magic

/* This code uses an extended set of video mode numbers. These include:
@@ -170,29 +145,9 @@ #define VIDEO_FIRST_V7 0x0900
# Setting of user mode (AX=mode ID) => CF=success
mode_set:
movw %ax, %bx
-#if 0
- cmpb $0xff, %ah
- jz setalias
-
- testb $VIDEO_RECALC>>8, %ah
- jnz _setrec
-
- cmpb $VIDEO_FIRST_RESOLUTION>>8, %ah
- jnc setres
-
- cmpb $VIDEO_FIRST_SPECIAL>>8, %ah
- jz setspc
-
- cmpb $VIDEO_FIRST_V7>>8, %ah
- jz setv7
-#endif

cmpb $VIDEO_FIRST_VESA>>8, %ah
jnc check_vesa
-#if 0
- orb %ah, %ah
- jz setmenu
-#endif

decb %ah
# jz setbios Add bios modes later
@@ -232,7 +187,6 @@ wakeup_pmode_return:
movw %ax, %es
movw %ax, %fs
movw %ax, %gs
- movw $0x0e00 + 'u', 0xb8016

# reload the gdt, as we need the full 32 bit address
lgdt saved_gdt
diff --git a/arch/x86_64/kernel/acpi/wakeup.S b/arch/x86_64/kernel/acpi/wakeup.S
index 13f1480..bc9af5d 100644
--- a/arch/x86_64/kernel/acpi/wakeup.S
+++ b/arch/x86_64/kernel/acpi/wakeup.S
@@ -41,7 +41,6 @@ wakeup_code:

# Running in *copy* of this code, somewhere in low 1MB.

- movb $0xa1, %al ; outb %al, $0x80
cli
cld
# setup data segment
@@ -65,11 +64,6 @@ # Running in *copy* of this code, somewh
cmpl $0x12345678, %eax
jne bogus_real_magic

- call verify_cpu # Verify the cpu supports long
- # mode
- testl %eax, %eax
- jnz no_longmode
-
testl $1, realmode_flags - wakeup_code
jz 1f
lcall $0xc000,$3
@@ -88,8 +82,6 @@ # Running in *copy* of this code, somewh
movw %ax,%fs
movw $0x0e00 + 'L', %fs:(0x10)

- movb $0xa2, %al ; outb %al, $0x80
-
mov %ds, %ax # Find 32bit wakeup_code addr
movzx %ax, %esi # (Convert %ds:gdt to a liner ptr)
shll $4, %esi
@@ -117,14 +109,10 @@ wakeup_32_vector:
.code32
wakeup_32:
# Running in this code, but at low address; paging is not yet turned on.
- movb $0xa5, %al ; outb %al, $0x80

movl $__KERNEL_DS, %eax
movl %eax, %ds

- movw $0x0e00 + 'i', %ds:(0xb8012)
- movb $0xa8, %al ; outb %al, $0x80;
-
/*
* Prepare for entering 64bits mode
*/
@@ -200,16 +188,11 @@ wakeup_long64:
*/
lgdt cpu_gdt_descr

- movw $0x0e00 + 'n', %ds:(0xb8014)
- movb $0xa9, %al ; outb %al, $0x80
-
movq saved_magic, %rax
movq $0x123456789abcdef0, %rdx
cmpq %rdx, %rax
jne bogus_64_magic

- movw $0x0e00 + 'u', %ds:(0xb8016)
-
nop
nop
movw $__KERNEL_DS, %ax
@@ -256,20 +239,12 @@ realmode_flags: .quad 0

.code16
bogus_real_magic:
- movb $0xba,%al ; outb %al,$0x80
jmp bogus_real_magic

.code64
bogus_64_magic:
- movb $0xb3,%al ; outb %al,$0x80
jmp bogus_64_magic

-.code16
-no_longmode:
- movb $0xbc,%al ; outb %al,$0x80
- jmp no_longmode
-
-#include "../verify_cpu.S"

/* This code uses an extended set of video mode numbers. These include:
* Aliases for standard modes
@@ -294,29 +269,9 @@ # Setting of user mode (AX=mode ID) => C
.code16
mode_seta:
movw %ax, %bx
-#if 0
- cmpb $0xff, %ah
- jz setalias
-
- testb $VIDEO_RECALC>>8, %ah
- jnz _setrec
-
- cmpb $VIDEO_FIRST_RESOLUTION>>8, %ah
- jnc setres
-
- cmpb $VIDEO_FIRST_SPECIAL>>8, %ah
- jz setspc
-
- cmpb $VIDEO_FIRST_V7>>8, %ah
- jz setv7
-#endif

cmpb $VIDEO_FIRST_VESA>>8, %ah
jnc check_vesaa
-#if 0
- orb %ah, %ah
- jz setmenu
-#endif

decb %ah
# jz setbios Add bios modes later
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-07-31 14:15    [W:0.125 / U:0.056 seconds]
©2003-2014 Jasper Spaans. Advertise on this site