lkml.org 
[lkml]   [2007]   [Jul]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subjectusb-storage autosuspend bug?
Alan and Oliver, was this caused by the autosuspend changes for
usb-storage?

thanks,

greg k-h

On Wed, Jul 25, 2007 at 04:34:03PM -0700, Linus Torvalds wrote:
>
>
> On Thu, 19 Jul 2007, Greg KH wrote:
> >
> > Here are some more USB patches and fixes against your 2.6.22 git tree.
> >
> > They add a new usb gadget driver, more urb->status cleanups, a new sysfs
> > attribute to get the raw config of the usb device, and some bugfixes and
> > documentation updates.
>
> I have a flaky(?) USB multi-card reader, and I just got an oops with it on
> x86-64. It was preceded by some of the IO errors:
>
> end_request: I/O error, dev sdc, sector 0
> sd 11:0:0:1: [sdc] Result: hostbyte=0x07 driverbyte=0x00
> end_request: I/O error, dev sdc, sector 0
> Buffer I/O error on device sdc, logical block 0
> usb 2-5: reset high speed USB device using ehci_hcd and address 10
> usb 2-5: reset high speed USB device using ehci_hcd and address 10
> usb 2-5: reset high speed USB device using ehci_hcd and address 10
> usb 2-5: reset high speed USB device using ehci_hcd and address 10
> usb 2-5: reset high speed USB device using ehci_hcd and address 10
> usb 2-5: reset high speed USB device using ehci_hcd and address 10
> usb 2-5: device descriptor read/all, error 0
>
> but the oops itself happened when I then removed the USB device due to
> the errors, causing this:
>
> usb 2-5: USB disconnect, address 10
> sd 11:0:0:1: [sdc] Result: hostbyte=0x07 driverbyte=0x00
> end_request: I/O error, dev sdc, sector 0
> Buffer I/O error on device sdc, logical block 0
> sd 11:0:0:1: [sdc] Result: hostbyte=0x07 driverbyte=0x00
> end_request: I/O error, dev sdc, sector 0
> Buffer I/O error on device sdc, logical block 0
> sd 11:0:0:1: [sdc] Result: hostbyte=0x01 driverbyte=0x00
> end_request: I/O error, dev sdc, sector 0
> Buffer I/O error on device sdc, logical block 0
> sd 11:0:0:1: [sdc] Result: hostbyte=0x01 driverbyte=0x00
> end_request: I/O error, dev sdc, sector 0
> Buffer I/O error on device sdc, logical block 0
> sd 11:0:0:1: [sdc] Result: hostbyte=0x01 driverbyte=0x00
> end_request: I/O error, dev sdc, sector 0
> Buffer I/O error on device sdc, logical block 0
> Dev sdc: unable to read RDB block 0
> sd 11:0:0:1: [sdc] Result: hostbyte=0x01 driverbyte=0x00
> end_request: I/O error, dev sdc, sector 0
> Buffer I/O error on device sdc, logical block 0
> unable to read partition table
> sd 11:0:0:1: [sdc] Attached SCSI removable disk
> sd 11:0:0:1: Attached scsi generic sg3 type 0
> usb-storage: device scan complete
>
> and finally the oops itself:
>
>
> general protection fault: 0000 [1] SMP
> CPU 0
> Modules linked in:
> Pid: 214, comm: khubd Not tainted 2.6.22-g20082208 #56
> RIP: 0010:[<ffffffff80274670>] [<ffffffff80274670>] kfree+0x27/0x81
> RSP: 0018:ffff81012bd0dd90 EFLAGS: 00010212
> RAX: 037d001b2d7d01b8 RBX: ffff810001000000 RCX: ffffffff80314f0f
> RDX: ffff81012337b738 RSI: 037c811b2e7d01b8 RDI: ff241b0cff251c0b
> RBP: ff241b0cff251c0b R08: ffffffff8062eed0 R09: ffff81012bc0f430
> R10: 0000000000000287 R11: ffffffff803ed953 R12: ffff81008642f140
> R13: 0000000000000000 R14: 0000000000001540 R15: 0000000000000008
> FS: 0000000000000000(0000) GS:ffffffff806a0000(0000) knlGS:0000000000000000
> CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
> CR2: 00002b02340410a0 CR3: 000000010bd4b000 CR4: 00000000000006e0
> Process khubd (pid: 214, threadinfo ffff81012bd0c000, task ffff81012bed36b0)
> Stack: ffff81012337b738 ffff81011e9fa800 ffff81008642f140 ffffffff803f50c4
> ffff81012337b738 ffff81011e9fa800 ffffffff8064ae70 ffff81011e9fa888
> ffff81012ad60978 ffff81012ad60800 ffff81012ad60800 ffffffff803ed96c
> Call Trace:
> [<ffffffff803f50c4>] usb_destroy_configuration+0x85/0xee
> [<ffffffff803ed96c>] usb_release_dev+0x19/0x55
> [<ffffffff803140c9>] kobject_cleanup+0x52/0x70
> [<ffffffff803140e7>] kobject_release+0x0/0x9
> [<ffffffff80314f0f>] kref_put+0x5d/0x68
> [<ffffffff803ef78f>] hub_thread+0x390/0xb27
> [<ffffffff8023dcb1>] autoremove_wake_function+0x0/0x2e
> [<ffffffff803ef3ff>] hub_thread+0x0/0xb27
> [<ffffffff8023db95>] kthread+0x47/0x76
> [<ffffffff8020c0f8>] child_rip+0xa/0x12
> [<ffffffff8023db4e>] kthread+0x0/0x76
> [<ffffffff8020c0ee>] child_rip+0x0/0x12
>
> Code: 48 8b 06 25 00 40 02 00 48 3d 00 40 02 00 75 04 48 8b 76 10
> RIP [<ffffffff80274670>] kfree+0x27/0x81
> RSP <ffff81012bd0dd90>
>
> Looks like another reference counting bug...
>
> Linus
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-07-27 01:11    [W:0.178 / U:0.380 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site