Messages in this thread | | | Date | Wed, 18 Jul 2007 16:22:57 -0700 | From | Ben Greear <> | Subject | Re: Linux, tcpdump and vlan |
| |
Patrick McHardy wrote: > andrei radulescu-banu wrote: > >> [...] >> >> In conclusion, here is the buglist: >> 1). If set promiscuous, the e1000 should disable any vlan rx filtering, so that it can receive vlan frames of other vlan id's. Other ethernet drivers probably need fixed as well. >> 2). The packet layer should change the rx skb device from the vlan 'fake' device (eth0.2) to the corresponding physical device (eth0), so when we run tcpdump on eth0 we see all vlan-tagged and non-vlan-tagged frames >> 3). The packet socket layer should insert the vlan tag header before passing frames to the upper layer, so tcpdump can display them. >> > Put another way, once you enable VLAN header stripping, you > won't see the headers for *any* VLAN, not only for those you're > actually running locally. This is also a problem for devices > like macvlan, where it would be desirable to make use of > hardware VLAN accerlation. I was thinking about storing the > information somewhere in the packets meta-data on both RX and > TX paths, that would also allow tcpdump to properly display > packets. > MAC-VLAN could gather this information based on it's parent device (ie, if parent-dev has VID 7, then add VID 7 to the meta data. There would be no need for any driver changes I think.
Other than TCP-dump, or some other raw protocol that wants to see the VLAN header in user-space, I can't think of what use this would be, however. And, if you just disable VLAN accel in the NIC (see below), that would make this mac-vlan hackery not needed at all? > I have planned to look into this when I find some time. > Your suggestion of disabling VLAN acceleration in promiscous > mode sounds like a reasonable solution until then .. > I think a better method would be to allow disabling VLAN HW accel for a NIC with ethtool. Then, the packets will be received by the software stack with the vlan header intact. Something sniffing on the physical dev will automatically get the VLAN header.
Thanks, Ben
-- Ben Greear <greearb@candelatech.com> Candela Technologies Inc http://www.candelatech.com
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |