lkml.org 
[lkml]   [2007]   [Jul]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH - 0/2] Identify native drivers and ACPI subsystem accessing the same resources
Date
On Friday 13 July 2007 06:58:12 am Thomas Renninger wrote:
> This patch should:
> a) Identify machines where potentially ACPI interference can happen and
> tell the user which legacy drivers are affected.
> b) Identify drivers/HW where we might need an ACPI driver in future
> c) If it works out (if not too much important drivers are affected)
> enforce that native, non-ACPI drivers using the same IO/System
> memory addresses as declared in ACPI namespace fail to load.

I like some of the ideas here, but as you say, there are some
issues to work out.

> There are two kind of IO/System memory declarations in ACPI ASL
> language: general variables and device specific resource
> declarations.
> The latter is already handled by pnpacpi and resources get requested
> from pnpacpi already. These resources can (with this patch) partly
> already be requested by the general ACPI declarations and this patch
> should handle this gracefully.

The PNP core does not request resources for devices that are active
at boot. Those resources currently don't get requested until a driver
claims the device. I think this is a bug that we should fix.

> ACPI drivers (e.g. pnpacpi and others) are allowed to request these
> resources (marked IORESOURCE_SHARED) through acpi_request_region().

I'm not a fan of IORESOURCE_SHARED. I think that will make people
think it's acceptable to share a device between several drivers. It
would be better to keep the ugliness of forcibly taking over a resource,
just as an incentive to clean up the drivers.

> Here two examples of not nice things that could happen with lax option:
>
> a) legacy drivers (in this case arch/x86_64/setup.c) request resources
> before ACPI variables (shared resources) are requested:
> (/proc/ioports):
> 0080-008f : dma page reg
> 0080-0080 : ACPI DEB0*
> In this case it's working as "dma page reg" includes the ACPI
> SystemIO variable's space. If the ACPI variable is bigger, I expect
> the ACPI variable would not get inserted...

I think the best thing would be to reserve the PNP (including ACPI)
resources first, then the legacy things from setup.c. I haven't looked
into that to see whether it's feasible. Then you might have something
like this:

0080-008f : 00:07 PNP0200
0080-008f : dma page reg

> b) A legacy driver requests resources bigger than the ACPI SystemIO
> variable, but the ACPI resource variable lies within the requested
> space. Example:
> (/proc/ioports):
> 0070-0071 : rtc0
> 0072-0073 : ACPI KSB0*
> (syslog):
> IO region [rtc] conflicts with [ACPI KSB0]. Ignoring.., system might
> run unstable.
> rtc: I/O resource 70 is not free.
>
> The rtc driver seems to request the whole rtc space (0x70-0x77)
> which fails because 0x72-0x73 has already been requested SHARED by
> an ACPI SystemIO variable. At least parts of the rtc space got
> requested (rtc0), I haven't checked whether the device was working
> correctly...

I tripped over a couple of these when I changed the PNP core to request
resources for active devices. The RTC is one; often BIOS says the RTC
is at 0x70-0x71 and 0x72-0x73, but the rtc drivers like to claim 0x8
(RTC_IO_EXTENT) ports. However, I think the driver only *uses* two
ports, so we should change the driver to only request what it is
using.

Another case is the "dma1" region from e820.c. Currently this is
0x0-0x1f, but most PNP0c02 devices only respond from 0x10-0x1f. So
I think we should start by splitting "dma1" into 0x0-0xf and 0x10-0x1f.

> Another issue that needs fix up is that the motherboad driver is not
> requesting it's resources anymore (which it still did with 2.6.18 - I
> didn't dig here anymore, maybe someone can comment why this has changed)

I don't know what's up here; I haven't looked at this recently.

> Summary:
> ...
> - Not fixable (maybe someone has an idea): If ACPI IO region declares
> a smaller IO part than the later native driver (e.g. example above
> with rtc driver), the partially overlapping resource cannot be
> registered and the native driver fails to load with strict and lax
> option.

Assuming the BIOS describes the region correctly, I'd say a driver
that claims a larger region is buggy and should be fixed.

Bjorn
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-07-13 19:13    [W:0.113 / U:22.948 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site