lkml.org 
[lkml]   [2007]   [Jul]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] retrieve VBE EDID/DDC info independent of used video mode
Daniel Drake wrote:
> H. Peter Anvin wrote:
>> User error.
>> Please replace user and press any key.
>>
>> # CONFIG_FIRMWARE_EDID is not set
>>
>> The user has *explicitly* disabled acquisition of EDID from the
>> firmware, so of course it doesn't probe for it.
>
> I'm not versed with all this EDID and resolution stuff, but shouldn't
> the resolution be detected correctly under all configurations?

Not if you actively disable detection!

Why would you want to be able to disable detection? Well, your BIOS
might be buggy.

> The original problem is that as of 2.6.20.11, the resolution is
> misdetected - it is wrong by 6 pixels. The same configuration with
> 2.6.20.10 works fine.

That is because 2.6.20.11 incorrectly disabled EDID detection when a
non-VESA mode was chosen as the initial mode. This is a bug.

> With the 2.6.20.10/2.6.20.11 configuration, the user did have
> CONFIG_FIRMWARE_EDID set. I'm not sure why he changed this for the -mm
> testing, but then again I don't understand why it should matter.

You're complaining that we didn't query EDID when you *explicitly* asked
us not to. This is not a bug!

-hpa
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-07-10 19:33    [W:0.217 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site