lkml.org 
[lkml]   [2007]   [Jun]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] retrieve VBE EDID/DDC info independent of used video mode
On Sat, 30 Jun 2007 18:25:31 -0400 Daniel Drake <dsd@gentoo.org> wrote:

> Jan Beulich wrote:
> > The code to retrieve this information was (a) inside a CONFIG_VIDEO_SELECT
> > section and (b) protected by a check of a variable (vbe_version) that
> > would get initialized only when a VESA mode was selected on the command
> > line.
>
> This patch solves a 2.6.20.11 (and 2.6.21) regression added by the patch
> titled "x86: Don't probe for DDC on VBE1.2"
>
> The regression caused the screen resolution to be incorrectly adjusted
> by 6 pixels. This patch makes it go back to normal again.
>
> https://bugs.gentoo.org/show_bug.cgi?id=181067
>
> Please apply this patch or discuss further :)

Well drat. I didn't merge the patch because it conflicts with
git-newsetup, and Peter believes that git-newsetup already contains an
equivalent fix. Testing 2.6.22-rc6-mm1 would confirm that. Please.

So what do we think? Should we merge Jan's patch into 2.6.22? And 2.6.21?
And do we feel that it is safe enough for this?

Or can we afford to leave this bug in place in 2.6.22, which would suck a
bit?


> > Signed-off-by: Jan Beulich <jbeulich@novell.com>
> >
> > arch/i386/boot/video.S | 28 ++++++++++++++++++----------
> > 1 files changed, 18 insertions(+), 10 deletions(-)
> >
> > --- linux-2.6.22-rc5/arch/i386/boot/video.S 2007-04-26 05:08:32.000000000 +0200
> > +++ 2.6.22-rc5-edid-no-vesa-mode/arch/i386/boot/video.S 2007-06-19 14:34:50.000000000 +0200
> > @@ -96,6 +96,7 @@
> > #define PARAM_LFB_PAGES 0x32
> > #define PARAM_VESA_ATTRIB 0x34
> > #define PARAM_CAPABILITIES 0x36
> > +#define PARAM_EDID_INFO 0x140
> >
> > /* Define DO_STORE according to CONFIG_VIDEO_RETAIN */
> > #ifdef CONFIG_VIDEO_RETAIN
> > @@ -132,8 +133,8 @@ vid1:
> > #ifdef CONFIG_VIDEO_RETAIN
> > call restore_screen # Restore screen contents
> > #endif /* CONFIG_VIDEO_RETAIN */
> > - call store_edid
> > #endif /* CONFIG_VIDEO_SELECT */
> > + call store_edid
> > call mode_params # Store mode parameters
> > popw %ds # Restore original DS
> > ret
> > @@ -571,16 +572,12 @@ setr1: lodsw
> > jmp _m_s
> >
> > check_vesa:
> > -#ifdef CONFIG_FIRMWARE_EDID
> > leaw modelist+1024, %di
> > movw $0x4f00, %ax
> > int $0x10
> > cmpw $0x004f, %ax
> > jnz setbad
> >
> > - movw 4(%di), %ax
> > - movw %ax, vbe_version
> > -#endif
> > leaw modelist+1024, %di
> > subb $VIDEO_FIRST_VESA>>8, %bh
> > movw %bx, %cx # Get mode information structure
> > @@ -1935,6 +1932,7 @@ skip10: movb %ah, %al
> > popw %cx
> > popw %ax
> > ret
> > +#endif /* CONFIG_VIDEO_SELECT */
> >
> > store_edid:
> > #ifdef CONFIG_FIRMWARE_EDID
> > @@ -1945,18 +1943,28 @@ store_edid:
> > pushw %dx
> > pushw %di
> >
> > + pushw %ds
> > + popw %es
> > + leaw modelist, %di
> > + movw $0x4f00, %ax
> > + int $0x10
> > + cmpw $0x004f, %ax
> > + setne %dl
> > + cmpw $0x0200, 4(%di) # only do EDID on >= VBE2.0
> > + adc %dl, %dl
> > +
> > pushw %fs
> > popw %es
> >
> > movl $0x13131313, %eax # memset block with 0x13
> > movw $32, %cx
> > - movw $0x140, %di
> > + movw $PARAM_EDID_INFO, %di
> > cld
> > rep
> > stosl
> >
> > - cmpw $0x0200, vbe_version # only do EDID on >= VBE2.0
> > - jl no_edid
> > + testb %dl, %dl
> > + jnz no_edid
> >
> > pushw %es # save ES
> > xorw %di, %di # Report Capability
> > @@ -1978,7 +1986,7 @@ store_edid:
> > movw $0x01, %bx
> > movw $0x00, %cx
> > movw $0x00, %dx
> > - movw $0x140, %di
> > + movw $PARAM_EDID_INFO, %di
> > int $0x10
> >
> > no_edid:
> > @@ -1991,6 +1999,7 @@ no_edid:
> > #endif
> > ret
> >
> > +#ifdef CONFIG_VIDEO_SELECT
> > # VIDEO_SELECT-only variables
> > mt_end: .word 0 # End of video mode table if built
> > edit_buf: .space 6 # Line editor buffer
> > @@ -2000,7 +2009,6 @@ do_restore: .byte 0 # Screen contents al
> > svga_prefix: .byte VIDEO_FIRST_BIOS>>8 # Default prefix for BIOS modes
> > graphic_mode: .byte 0 # Graphic mode with a linear frame buffer
> > dac_size: .byte 6 # DAC bit depth
> > -vbe_version: .word 0 # VBE bios version
> >
> > # Status messages
> > keymsg: .ascii "Press <RETURN> to see video modes available, "
> >
> >
> >
> > -
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> > Please read the FAQ at http://www.tux.org/lkml/
> >
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-07-01 00:47    [W:2.117 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site