lkml.org 
[lkml]   [2007]   [Jun]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Writing a driver for a legacy serial device
Hi Dmitry,

Thanks for your answer, very much appreciated.

On Tue, 19 Jun 2007 14:59:34 -0400, Dmitry Torokhov wrote:
> Hi Jean,
>
> On 6/19/07, Jean Delvare <khali@linux-fr.org> wrote:
> > Hi all,
> >
> > I want to write a Linux kernel driver for a device which connects to
> > the legacy serial port. I started writing a driver, however I am
> > already stuck at the very beginning. The .connect function of my serial
> > driver is never called, and I just don't get why. I couldn't find any
> > documentation about writing such a legacy driver in Documentation nor
> > in LDD3. Is there anyone out there which could lend a helping hand?
> >
> > I know that the device and my serial port both work. I can talk to the
> > device using minicom just fine. I have the following drivers loaded:
> >
> > $ lsmod | grep 8250
> > 8250_pnp 11648 0
> > 8250 23464 1 8250_pnp
> > serial_core 19392 1 8250
> >
> > Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
> > 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> >
> > But I need to implement my driver in kernel space. My code looks like
> > this:
> >
> > static struct serio_device_id taos_serio_ids[] = {
> > {
> > .type = SERIO_RS232,
> > .proto = SERIO_ANY,
> > .id = SERIO_ANY,
> > .extra = SERIO_ANY,
> > },
> > { 0 }
> > };
> > MODULE_DEVICE_TABLE(serio, taos_serio_ids);
> >
> > static struct serio_driver taos_drv = {
> > .driver = {
> > .name = "taos-evm",
> > },
> > .description = "TAOS evaluation module driver",
> > .id_table = taos_serio_ids,
> > .connect = taos_connect,
> > .disconnect = taos_disconnect,
> > .interrupt = taos_interrupt,
> > };
> >
> > static int __init taos_init(void)
> > {
> > return serio_register_driver(&taos_drv);
> > }
> >
> > static void __exit taos_exit(void)
> > {
> > serio_unregister_driver(&taos_drv);
> > }
> >
> > The problem is that taos_connect is never called. I suppose that I need
> > different values for .type, .proto or .id, except that I just don't
> > know what to put there. I tried a few random values without success.
> > What's the trick?
>
> You need to load serport modue and play with inputattach utility.

Ah, I see. There's no way to detect what device is connected to the
serial port, so we need a user-space tool to bind the port to the right
driver? Makes some sense, even though it's a but strange that I need
something called inputattach for a device which isn't an input device.

So I've set CONFIG_SERIO_SERPORT=m, compiled and loaded serport. Then I
added a new protocol number in <linux/serio.h>:

#define SERIO_TAOSEVM 0x40

Then I added the following entry to inputattach and recompiled it:

{ "--taos-evm", "-taos", B1200, CS8, SERIO_TAOSEVM, 0, 0, 0, NULL },

Then I changed my driver code to:

static struct serio_device_id taos_serio_ids[] = {
{
.type = SERIO_RS232,
.proto = SERIO_TAOSEVM,
.id = SERIO_ANY,
.extra = SERIO_ANY,
},
{ 0 }
};

And lastly I ran, as root:

./inputattach -taos /dev/ttyS0

I see the following line in the logs as a result:

serio: Serial port ttyS0

But unfortunately, my driver's .connect function is still not called.
I guess that I missed one step? Any idea what it would be?

Thanks,
--
Jean Delvare
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-06-20 10:59    [W:0.081 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site