![]() | |||||||||||||
Messages in this thread |
----- "Daniel J Blueman" <daniel.blueman@gmail.com> wrote: > On 1 Jun, 19:40, "Lee Revell" <rlrevell@joe-job.com> wrote: > > On 6/1/07, Matthew Fredrickson <creslin@digium.com> wrote: > > > is it acceptable (although > > > not nice) to simply fix it this way, by disabling irqs while it > loads > > > the firmware? > > > > I would say to just disable IRQs while loading firmware. Almost > every > > server I maintain has some vendor driver which generates a "many > lost > > ticks!" message on load. As long as it's only done at module load > > time it should be fine. > > For anything ~10s or more, you'll probably also need to call the > timer > update function to prevent soft lockup warning being generated. Ahhh... so there is a way to get rid of that cursed message. I forgot to mention this in my original message, the only place that I had seen this problem is on a certain machine (Dell 2950) with a certain distribution (FC6) kernel. I had trimmed the code down to fit in 4K stacks already quite a bit. I believe what actually made it crash and overflow the stack (the straw that breaks the camels back, so to speak) was the intermittent triggering of the softlockup detector. I think if I can disable that while the firmware is loading that will fix the stack overflow issues and correct my problem. Matthew Fredrickson - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/ | ||||||||||||
| Last update: 2007-06-02 15:15 [from the cache] ©2003-2008 | |||||||||||||