lkml.org 
[lkml]   [2007]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/5] Add RapidIO support to powerpc architecture.
Date
This patch adds the RapidIO support to the powerpc architecture.
Some files are moved from ppc. OF-tree and OF-device support are added.
New silicons such as MPC8548, MPC8641 with serial RapidIO controller are all supported.
Memory driver hardware operations are added.
Global mport variables are changed to master port private variables.
Multi master ports are supported.

Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
---
arch/powerpc/Kconfig | 8 +
arch/powerpc/kernel/Makefile | 1 +
arch/powerpc/kernel/rio.c | 64 ++
arch/powerpc/sysdev/Makefile | 1 +
arch/powerpc/sysdev/fsl_rio.c | 1446 +++++++++++++++++++++++++++++++++++++++++
arch/powerpc/sysdev/fsl_rio.h | 20 +
6 files changed, 1540 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/kernel/rio.c
create mode 100644 arch/powerpc/sysdev/fsl_rio.c
create mode 100644 arch/powerpc/sysdev/fsl_rio.h
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index e683668..a41aaac 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -742,6 +742,14 @@ source "drivers/pci/Kconfig"

source "drivers/pcmcia/Kconfig"

+config RAPIDIO
+ bool "RapidIO support" if MPC8540 || MPC8560 || MPC8641 || MPC8548
+ help
+ If you say Y here, the kernel will include drivers and
+ infrastructure code to support RapidIO interconnect devices.
+
+source "drivers/rapidio/Kconfig"
+
source "drivers/pci/hotplug/Kconfig"

endmenu
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 3e779f0..9ed2367 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -69,6 +69,7 @@ pci64-$(CONFIG_PPC64) += pci_64.o pci_dn.o
pci32-$(CONFIG_PPC32) := pci_32.o
obj-$(CONFIG_PCI) += $(pci64-y) $(pci32-y)
obj-$(CONFIG_PCI_MSI) += msi.o
+obj-$(CONFIG_RAPIDIO) += rio.o
kexec-$(CONFIG_PPC64) := machine_kexec_64.o
kexec-$(CONFIG_PPC32) := machine_kexec_32.o
obj-$(CONFIG_KEXEC) += machine_kexec.o crash.o $(kexec-y)
diff --git a/arch/powerpc/kernel/rio.c b/arch/powerpc/kernel/rio.c
new file mode 100644
index 0000000..7275c32
--- /dev/null
+++ b/arch/powerpc/kernel/rio.c
@@ -0,0 +1,64 @@
+/*
+ * RapidIO PowerPC support
+ *
+ * Copyright (C) 2007 Freescale Simconductor, Inc. All rights reserved.
+ * Zhang Wei <wei.zhang@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * New RapidIO peer-to-peer network initialize with of-device supoort.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/rio.h>
+
+#include <asm/rio.h>
+#include <asm/of_device.h>
+#include <asm/of_platform.h>
+
+#include <../sysdev/fsl_rio.h>
+
+
+/* The probe function for RapidIO peer-to-peer network.
+ */
+static int __devinit of_rio_rpn_probe(struct of_device *dev,
+ const struct of_device_id *match)
+{
+ int rc;
+ printk(KERN_INFO "Setting up RapidIO peer-to-peer network %s\n",
+ dev->node->full_name);
+
+ rc = fsl_rio_setup(dev);
+ if (rc)
+ goto out;
+
+ /* Enumerate all registered ports */
+ rc = rio_init_mports();
+out:
+ return rc;
+};
+
+static struct of_device_id of_rio_rpn_ids[] = {
+ {
+ .type = "rapidio",
+ },
+ {},
+};
+
+static struct of_platform_driver of_rio_rpn_driver = {
+ .name = "of-rio",
+ .match_table = of_rio_rpn_ids,
+ .probe = of_rio_rpn_probe,
+};
+
+static __init int of_rio_rpn_init(void)
+{
+ return of_register_platform_driver(&of_rio_rpn_driver);
+}
+
+subsys_initcall(of_rio_rpn_init);
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index c3ce0bd..5d6d66b 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_U3_DART) += dart_iommu.o
obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o
obj-$(CONFIG_FSL_SOC) += fsl_soc.o
obj-$(CONFIG_FSL_PCIE) += fsl_pcie.o
+obj-$(CONFIG_RAPIDIO) += fsl_rio.o
obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o
obj-$(CONFIG_QUICC_ENGINE) += qe_lib/
mv64x60-$(CONFIG_PCI) += mv64x60_pci.o
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
new file mode 100644
index 0000000..6d43068
--- /dev/null
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -0,0 +1,1446 @@
+/*
+ * PowerPC RapidIO support
+ *
+ * Copyright (C) 2007 Freescale Simconductor, Inc. All rights reserved.
+ * Zhang Wei <wei.zhang@freescale.com>
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This file is moved from arch/ppc/ppc85xx_rio.c. And the OF-tree support
+ * is added. New silicons such as MPC8548, MPC8641 are all supported.
+ * Memory driver hardware operations are added.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/of_device.h>
+#include <asm/of_platform.h>
+#include "fsl_soc.h"
+
+/* RapidIO definition irq, which read from OF-tree */
+#define IRQ_RIO_BELL(m) (((struct rio_priv *)(m->priv))->bellirq)
+#define IRQ_RIO_TX(m) (((struct rio_priv *)(m->priv))->txirq)
+#define IRQ_RIO_RX(m) (((struct rio_priv *)(m->priv))->rxirq)
+
+#define ERR(fmt, arg...) \
+ printk(KERN_ERR "RIO %s: " fmt, __FUNCTION__, ## arg)
+#define INFO(fmt...) printk(KERN_INFO "RIO: " fmt)
+#define IS_64BIT_RES ((sizeof(resource_size_t) == 8) ? 1 : 0)
+
+#define RIO_ATMU_REGS_OFFSET 0x10c00
+#define RIO_P_MSG_REGS_OFFSET 0x11000
+#define RIO_S_MSG_REGS_OFFSET 0x13000
+#define RIO_ESCSR 0x158
+#define RIO_CCSR 0x15c
+#define RIO_ISR_AACR 0x10120
+#define RIO_ISR_AACR_AA 0x1 /* Accept All ID */
+#define RIO_MAINT_WIN_SIZE 0x400000
+#define RIO_DBELL_WIN_SIZE 0x1000
+#define RIO_MAX_INB_ATMU 4
+#define RIO_MAX_OUTB_ATMU 8
+#define RIO_INB_ATMU_REGS_OFFSET 0x10de0
+#define RIO_ATMU_EN_MASK 0x80000000
+
+#define RIO_NREAD 0x4
+#define RIO_NWRITE 0x4
+#define RIO_NWRITE_R 0x5
+#define RIO_NREAD_R 0x5
+
+#define RIO_MSG_OMR_MUI 0x00000002
+#define RIO_MSG_OSR_TE 0x00000080
+#define RIO_MSG_OSR_QOI 0x00000020
+#define RIO_MSG_OSR_QFI 0x00000010
+#define RIO_MSG_OSR_MUB 0x00000004
+#define RIO_MSG_OSR_EOMI 0x00000002
+#define RIO_MSG_OSR_QEI 0x00000001
+
+#define RIO_MSG_IMR_MI 0x00000002
+#define RIO_MSG_ISR_TE 0x00000080
+#define RIO_MSG_ISR_QFI 0x00000010
+#define RIO_MSG_ISR_DIQI 0x00000001
+
+#define RIO_MSG_DESC_SIZE 32
+#define RIO_MSG_BUFFER_SIZE 4096
+#define RIO_MIN_TX_RING_SIZE 2
+#define RIO_MAX_TX_RING_SIZE 2048
+#define RIO_MIN_RX_RING_SIZE 2
+#define RIO_MAX_RX_RING_SIZE 2048
+
+#define DOORBELL_DMR_DI 0x00000002
+#define DOORBELL_DSR_TE 0x00000080
+#define DOORBELL_DSR_QFI 0x00000010
+#define DOORBELL_DSR_DIQI 0x00000001
+#define DOORBELL_TID_OFFSET 0x02
+#define DOORBELL_SID_OFFSET 0x04
+#define DOORBELL_INFO_OFFSET 0x06
+
+#define DOORBELL_MESSAGE_SIZE 0x08
+#define DBELL_SID(x) (*(u16 *)(x + DOORBELL_SID_OFFSET))
+#define DBELL_TID(x) (*(u16 *)(x + DOORBELL_TID_OFFSET))
+#define DBELL_INF(x) (*(u16 *)(x + DOORBELL_INFO_OFFSET))
+
+struct rio_atmu_regs {
+ u32 rowtar;
+ u32 rowtear;
+ u32 rowbar;
+ u32 pad2;
+ u32 rowar;
+ u32 pad3[3];
+};
+
+struct rio_inb_atmu_regs {
+ u32 riwtar;
+ u32 pad1;
+ u32 riwbar;
+ u32 pad2;
+ u32 riwar;
+ u32 pad3[3];
+};
+
+struct rio_msg_regs {
+ u32 omr;
+ u32 osr;
+ u32 pad1;
+ u32 odqdpar;
+ u32 pad2;
+ u32 osar;
+ u32 odpr;
+ u32 odatr;
+ u32 odcr;
+ u32 pad3;
+ u32 odqepar;
+ u32 pad4[13];
+ u32 imr;
+ u32 isr;
+ u32 pad5;
+ u32 ifqdpar;
+ u32 pad6;
+ u32 ifqepar;
+ u32 pad7[226];
+ u32 odmr;
+ u32 odsr;
+ u32 res0[4];
+ u32 oddpr;
+ u32 oddatr;
+ u32 res1[3];
+ u32 odretcr;
+ u32 res2[12];
+ u32 dmr;
+ u32 dsr;
+ u32 pad8;
+ u32 dqdpar;
+ u32 pad9;
+ u32 dqepar;
+ u32 pad10[26];
+ u32 pwmr;
+ u32 pwsr;
+ u32 pad11;
+ u32 pwqbar;
+};
+
+struct rio_tx_desc {
+ u32 res1;
+ u32 saddr;
+ u32 dport;
+ u32 dattr;
+ u32 res2;
+ u32 res3;
+ u32 dwcnt;
+ u32 res4;
+};
+
+struct rio_dbell_ring {
+ void *virt;
+ dma_addr_t phys;
+};
+
+struct rio_msg_tx_ring {
+ void *virt;
+ dma_addr_t phys;
+ void *virt_buffer[RIO_MAX_TX_RING_SIZE];
+ dma_addr_t phys_buffer[RIO_MAX_TX_RING_SIZE];
+ int tx_slot;
+ int size;
+ void *dev_id;
+};
+
+struct rio_msg_rx_ring {
+ void *virt;
+ dma_addr_t phys;
+ void *virt_buffer[RIO_MAX_RX_RING_SIZE];
+ int rx_slot;
+ int size;
+ void *dev_id;
+};
+
+struct rio_priv {
+ void __iomem *regs_win;
+ struct rio_atmu_regs __iomem *atmu_regs;
+ struct rio_atmu_regs __iomem *maint_atmu_regs;
+ struct rio_atmu_regs __iomem *dbell_atmu_regs;
+ void __iomem *dbell_win;
+ void __iomem *maint_win;
+ struct rio_msg_regs __iomem *msg_regs;
+ struct rio_dbell_ring dbell_ring;
+ struct rio_msg_tx_ring msg_tx_ring;
+ struct rio_msg_rx_ring msg_rx_ring;
+ int bellirq;
+ int txirq;
+ int rxirq;
+};
+
+/**
+ * fsl_rio_doorbell_send - Send a PowerPC doorbell message
+ * @index: ID of RapidIO interface
+ * @destid: Destination ID of target device
+ * @data: 16-bit info field of RapidIO doorbell message
+ *
+ * Sends a PowerPC doorbell message. Returns %0 on success or
+ * %-EINVAL on failure.
+ */
+static int fsl_rio_doorbell_send(struct rio_mport *mport, int index, u16 destid, u16 data)
+{
+ struct rio_priv *priv = mport->priv;
+ pr_debug("fsl_doorbell_send: index %d destid 0x%04x data 0x%04x\n",
+ index, destid, data);
+
+ switch (mport->phy_type) {
+ case RIO_PHY_SERIAL:
+ /* In the later version silicons, such as MPC8548, MPC8641,
+ * below operations is must be.
+ */
+ out_be32(&priv->msg_regs->odmr, 0x00000000);
+ out_be32(&priv->msg_regs->odretcr, 0x00000004);
+ out_be32(&priv->msg_regs->oddpr, destid << 16);
+ out_be32(&priv->msg_regs->oddatr,data );
+ out_be32(&priv->msg_regs->odmr, 0x00000001);
+ break;
+ case RIO_PHY_PARALLEL:
+ out_be32(&priv->dbell_atmu_regs->rowtar, destid << 22);
+ out_be16(priv->dbell_win, data);
+ break;
+ }
+
+ return 0;
+}
+
+/**
+ * fsl_local_config_read - Generate a PowerPC local config space read
+ * @index: ID of RapdiIO interface
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @data: Value to be read into
+ *
+ * Generates a PowerPC local configuration space read. Returns %0 on
+ * success or %-EINVAL on failure.
+ */
+static int fsl_local_config_read(struct rio_mport *mport, int index, u32 offset, int len, u32 * data)
+{
+ struct rio_priv *priv = mport->priv;
+ pr_debug("fsl_local_config_read: index %d offset 0x%08x\n", index,
+ offset);
+ *data = in_be32(priv->regs_win + offset);
+
+ return 0;
+}
+
+/**
+ * fsl_local_config_write - Generate a PowerPC local config space write
+ * @index: ID of RapdiIO interface
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @data: Value to be written
+ *
+ * Generates a PowerPC local configuration space write. Returns %0 on
+ * success or %-EINVAL on failure.
+ */
+static int fsl_local_config_write(struct rio_mport *mport, int index, u32 offset, int len, u32 data)
+{
+ struct rio_priv *priv = mport->priv;
+ pr_debug("fsl_local_config_write: index %d offset 0x%08x data 0x%08x\n",
+ index, offset, data);
+ out_be32(priv->regs_win + offset, data);
+
+ return 0;
+}
+
+/**
+ * fsl_rio_config_read - Generate a PowerPC read maintenance transaction
+ * @index: ID of RapdiIO interface
+ * @destid: Destination ID of transaction
+ * @hopcount: Number of hops to target device
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @val: Location to be read into
+ *
+ * Generates a PowerPC read maintenance transaction. Returns %0 on
+ * success or %-EINVAL on failure.
+ */
+static int fsl_rio_config_read(struct rio_mport *mport, int index, u16 destid,
+ u8 hopcount, u32 offset, int len, u32 * val)
+{
+ void *data;
+ struct rio_priv *priv = mport->priv;
+
+ pr_debug("fsl_rio_config_read: index %d destid %d hopcount %d "
+ "offset 0x%08x len %d\n",
+ index, destid, hopcount, offset, len);
+ out_be32(&priv->maint_atmu_regs->rowtar,
+ ((destid & 0x3ff) << 22) | (hopcount << 12)
+ | ((offset & ~0x3) >> 9));
+ out_be32(&priv->maint_atmu_regs->rowtear, (destid & 0xfc00) >> 10);
+
+ data = priv->maint_win + offset;
+ switch (len) {
+ case 1:
+ *val = in_8(data);
+ break;
+ case 2:
+ *val = in_be16(data);
+ break;
+ default:
+ *val = in_be32(data);
+ break;
+ }
+
+ return 0;
+}
+
+/**
+ * fsl_rio_config_write - Generate a PowerPC write maintenance transaction
+ * @index: ID of RapdiIO interface
+ * @destid: Destination ID of transaction
+ * @hopcount: Number of hops to target device
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @val: Value to be written
+ *
+ * Generates an PowerPC write maintenance transaction. Returns %0 on
+ * success or %-EINVAL on failure.
+ */
+static int fsl_rio_config_write(struct rio_mport *mport, int index, u16 destid,
+ u8 hopcount, u32 offset, int len, u32 val)
+{
+ void *data;
+ struct rio_priv *priv = mport->priv;
+ pr_debug("fsl_rio_config_write: index %d destid %d hopcount %d"
+ "offset 0x%08x len %d val 0x%08x\n",
+ index, destid, hopcount, offset, len, val);
+ out_be32(&priv->maint_atmu_regs->rowtar,
+ ((destid & 0x3ff) << 22) | (hopcount << 12)
+ | ((offset & ~0x3) >> 9));
+ out_be32(&priv->maint_atmu_regs->rowtear, (destid & 0xfc00) >> 10);
+
+ data = priv->maint_win + offset;
+ switch (len) {
+ case 1:
+ out_8(data, val);
+ break;
+ case 2:
+ out_be16(data, val);
+ break;
+ default:
+ out_be32(data, val);
+ break;
+ }
+
+ return 0;
+}
+
+/**
+ * fsl_rio_map_inb_mem -- Mapping inbound memory region.
+ * @lstart: Local memory space start address.
+ * @rstart: RapidIO space start address.
+ * @size: The mapping region size.
+ * @flags: Flags for mapping.
+ *
+ * Return: 0 -- Success.
+ *
+ * This function will create the inbound mapping
+ * from rstart to lstart.
+ */
+static int fsl_rio_map_inb_mem(struct rio_mport *mport, resource_size_t lstart,
+ resource_size_t rstart, resource_size_t size,
+ u32 flags)
+{
+ int i;
+ struct rio_priv *priv = mport->priv;
+ volatile struct rio_inb_atmu_regs __iomem *inbatmu =
+ (struct rio_inb_atmu_regs *)
+ (priv->regs_win + RIO_INB_ATMU_REGS_OFFSET) - 1;
+ int size_ffs;
+ resource_size_t align;
+
+ align = (size < 0x1000) ? 0x1000 : 1 << (__ilog2(size - 1) + 1);
+
+ /* Align the size */
+ if ((lstart + size) > (_ALIGN_DOWN(lstart, align) + align)) {
+ size_ffs = __ffs(_ALIGN_DOWN(lstart + size - 1, align));
+ size = 1 << (size_ffs + (((_ALIGN_DOWN(lstart, 1 << size_ffs) +
+ (1 << size_ffs)) < (lstart + size)) ? 1 : 0));
+ } else
+ size = align;
+
+ if ((lstart & (size - 1)) != (rstart & (size - 1))) {
+ ERR("The local address 0x%x can not be aligned to the same size"
+ " 0x%x with the RapidIO space address 0x%x!\n", lstart,
+ size, rstart);
+ return -EINVAL;
+ }
+
+ /* Search for free inbound ATMU */
+ for (i = 1;
+ (i <= RIO_MAX_INB_ATMU) && (inbatmu->riwar & RIO_ATMU_EN_MASK);
+ i++, inbatmu--)
+ ;
+
+ if (i > RIO_MAX_INB_ATMU) {
+ ERR("No free inbound ATMU!\n");
+ return -EBUSY;
+ }
+ out_be32(&inbatmu->riwtar, ((IS_64BIT_RES ? (lstart >> 32)
+ & 0xf : 0) << 20) | ((lstart >> 12) & 0xfffff));
+ out_be32(&inbatmu->riwbar, ((IS_64BIT_RES ? (rstart >> 32)
+ & 0x3 : 0) << 20) | ((rstart >> 12) & 0xfffff));
+ out_be32(&inbatmu->riwar, 0x80000000 | (0xf << 20)
+ | (RIO_NREAD_R << 16) | (RIO_NWRITE_R << 12)
+ | (__ilog2(size) - 1));
+ return 0;
+}
+
+/**
+ * fsl_rio_map_outb_mem -- Mapping outbound memory region.
+ * @lstart: Local memory space start address.
+ * @rstart: RapidIO space start address.
+ * @size: The mapping region size.
+ * @tid: The target RapidIO device id.
+ * @flags: Flags for mapping.
+ *
+ * Return: 0 -- Success.
+ *
+ * This function will create the outbound mapping
+ * from lstart to rstart.
+ */
+static int fsl_rio_map_outb_mem(struct rio_mport *mport, resource_size_t lstart,
+ resource_size_t rstart, resource_size_t size,
+ u16 tid, u32 flags)
+{
+ int i;
+ struct rio_priv *priv = mport->priv;
+ volatile struct rio_atmu_regs __iomem *outbatmu =
+ (struct rio_atmu_regs *)
+ (priv->regs_win + RIO_ATMU_REGS_OFFSET) + 1;
+ int size_ffs;
+ resource_size_t align;
+
+ align = (size < 0x1000) ? 0x1000 : 1 << (__ilog2(size - 1) + 1);
+
+ /* Align the size */
+ if ((lstart + size) > (_ALIGN_DOWN(lstart, align) + align)) {
+ size_ffs = __ffs(_ALIGN_DOWN(lstart + size - 1, align));
+ size = 1 << (size_ffs + (((_ALIGN_DOWN(lstart, 1 << size_ffs) +
+ (1 << size_ffs)) < (lstart + size)) ? 1 : 0));
+ } else
+ size = align;
+
+ if ((lstart & (size - 1)) != (rstart & (size - 1))) {
+ ERR("The local address 0x%x can not be aligned to the same size"
+ " 0x%x with the RapidIO space address 0x%x!\n", lstart,
+ size, rstart);
+ return -EINVAL;
+ }
+
+ /* Search for free outbound ATMU */
+ for (i = 1;
+ (i <= RIO_MAX_OUTB_ATMU) && (outbatmu->rowar & RIO_ATMU_EN_MASK);
+ i++, outbatmu++)
+ ;
+
+ if (i > RIO_MAX_OUTB_ATMU) {
+ ERR("No free outbound ATMU!\n");
+ return -EBUSY;
+ }
+ out_be32(&outbatmu->rowtar, ((tid & 0x3ff) << 22)
+ | ((IS_64BIT_RES ? (rstart >> 32) & 0x3 : 0) << 20)
+ | ((rstart >> 12) & 0xfffff));
+ if (mport->phy_type == RIO_PHY_SERIAL)
+ out_be32(&outbatmu->rowtear, tid >> 10);
+ out_be32(&outbatmu->rowbar, ((IS_64BIT_RES ?
+ (lstart >> 32) & 0xf : 0) << 20)
+ | ((lstart >> 12) & 0xfffff));
+ out_be32(&outbatmu->rowar, 0x80000000 | (RIO_NREAD << 16)
+ | (RIO_NWRITE_R << 12) | (__ilog2(size) - 1));
+ return 0;
+}
+
+/**
+ * fsl_rio_unmap_inb_mem -- Unmapping inbound memory region.
+ * @lstart: Local memory space start address.
+ */
+static void fsl_rio_unmap_inb_mem(struct rio_mport *mport, resource_size_t lstart)
+{
+ int i;
+ struct rio_priv *priv = mport->priv;
+ struct rio_inb_atmu_regs __iomem *inbatmu = (struct rio_inb_atmu_regs *)
+ (priv->regs_win + RIO_INB_ATMU_REGS_OFFSET) - 1;
+
+ /* Search for inbound ATMU */
+ for (i = 1; i <= RIO_MAX_INB_ATMU ; i++, inbatmu--) {
+ u32 tar = ((IS_64BIT_RES ? (lstart >> 32) & 0xf : 0) << 20)
+ | ((lstart >> 12) & 0xfffff);
+ if (inbatmu->riwtar == tar) {
+ out_be32(&inbatmu->riwar, ~(RIO_ATMU_EN_MASK));
+ return;
+ }
+ }
+}
+
+/**
+ * fsl_rio_unmap_inb_mem -- Unmapping outbound memory region.
+ * @lstart: Local memory space start address.
+ */
+static void fsl_rio_unmap_outb_mem(struct rio_mport *mport, resource_size_t lstart)
+{
+ int i;
+ struct rio_priv *priv = mport->priv;
+ struct rio_atmu_regs __iomem *outbatmu = (struct rio_atmu_regs *)
+ (priv->regs_win + RIO_ATMU_REGS_OFFSET) + 1;
+
+ /* Search for outbound ATMU */
+ for (i = 1; i <= RIO_MAX_OUTB_ATMU ; i++, outbatmu++) {
+ u32 bar = ((IS_64BIT_RES ? (lstart >> 32) & 0xf : 0) << 20)
+ | ((lstart >> 12) & 0xfffff);
+ if (outbatmu->rowbar == bar) {
+ out_be32(&outbatmu->rowar, ~(RIO_ATMU_EN_MASK));
+ return;
+ }
+ }
+}
+
+/**
+ * rio_hw_add_outb_message - Add message to the PowerPC outbound message queue
+ * @mport: Master port with outbound message queue
+ * @rdev: Target of outbound message
+ * @mbox: Outbound mailbox
+ * @buffer: Message to add to outbound queue
+ * @len: Length of message
+ *
+ * Adds the @buffer message to the PowerPC outbound message queue. Returns
+ * %0 on success or %-EINVAL on failure.
+ */
+int rio_hw_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev,
+ int mbox, void *buffer, size_t len)
+{
+ struct rio_priv *priv = mport->priv;
+ struct rio_tx_desc *desc =
+ (struct rio_tx_desc *)priv->msg_tx_ring.virt + priv->msg_tx_ring.tx_slot;
+ int ret = 0;
+
+ pr_debug("RIO: rio_hw_add_outb_message(): "
+ "destid 0x%04x mbox %d buffer %p len 0x%08x\n",
+ rdev->destid, mbox, buffer, len);
+
+ if ((len < 8) || (len > RIO_MAX_MSG_SIZE)) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ /* Copy and clear rest of buffer */
+ memcpy(priv->msg_tx_ring.virt_buffer[priv->msg_tx_ring.tx_slot], buffer, len);
+ if (len < (RIO_MAX_MSG_SIZE - 4))
+ memset(priv->msg_tx_ring.virt_buffer[priv->msg_tx_ring.tx_slot]
+ + len, 0, RIO_MAX_MSG_SIZE - len);
+
+ switch(mport->phy_type) {
+ case RIO_PHY_SERIAL:
+ /* Set mbox field for message, and set destid */
+ desc->dport = (rdev->destid << 16) | ( mbox & 0x3);
+
+ /* Enable EOMI interrupt and priority */
+ desc->dattr = 0x28000000;
+
+ /* Set mbox field for message */
+ desc->dport = mbox & 0x3;
+ break;
+ case RIO_PHY_PARALLEL:
+ /* Enable EOMI interrupt, set priority, and set destid */
+ desc->dattr = 0x28000000 | (rdev->destid << 2);
+ break;
+ }
+
+ /* Set transfer size aligned to next power of 2 (in double words) */
+ desc->dwcnt = is_power_of_2(len) ? len : 1 << get_bitmask_order(len);
+
+ /* Set snooping and source buffer address */
+ desc->saddr = 0x00000004 | priv->msg_tx_ring.phys_buffer[priv->msg_tx_ring.tx_slot];
+
+ /* Increment enqueue pointer */
+ setbits32(&priv->msg_regs->omr, RIO_MSG_OMR_MUI);
+
+ /* Go to next descriptor */
+ if (++priv->msg_tx_ring.tx_slot == priv->msg_tx_ring.size)
+ priv->msg_tx_ring.tx_slot = 0;
+
+ out:
+ return ret;
+}
+
+EXPORT_SYMBOL_GPL(rio_hw_add_outb_message);
+
+/**
+ * fsl_rio_tx_handler - PowerPC outbound message interrupt handler
+ * @irq: Linux interrupt number
+ * @dev_instance: Pointer to interrupt-specific data
+ *
+ * Handles outbound message interrupts. Executes a register outbound
+ * mailbox event handler and acks the interrupt occurence.
+ */
+static irqreturn_t fsl_rio_tx_handler(int irq, void *dev_instance)
+{
+ int osr;
+ struct rio_mport *port = (struct rio_mport *)dev_instance;
+ struct rio_priv *priv = port->priv;
+
+ osr = in_be32(&priv->msg_regs->osr);
+
+ if (unlikely(osr & RIO_MSG_OSR_TE)) {
+ pr_info("RIO: outbound message transmission error\n");
+ out_be32(&priv->msg_regs->osr, RIO_MSG_OSR_TE);
+ goto out;
+ }
+
+ if (unlikely(osr & RIO_MSG_OSR_QOI)) {
+ pr_info("RIO: outbound message queue overflow\n");
+ out_be32(&priv->msg_regs->osr, RIO_MSG_OSR_QOI);
+ goto out;
+ }
+
+ if (osr & RIO_MSG_OSR_EOMI) {
+ u32 dqp = in_be32(&priv->msg_regs->odqdpar);
+ int slot = (dqp - priv->msg_tx_ring.phys) >> 5;
+ port->outb_msg[0].mcback(port, priv->msg_tx_ring.dev_id, -1, slot);
+
+ /* Ack the end-of-message interrupt */
+ out_be32(&priv->msg_regs->osr, RIO_MSG_OSR_EOMI);
+ }
+
+ out:
+ return IRQ_HANDLED;
+}
+
+/**
+ * rio_open_outb_mbox - Initialize PowerPC outbound mailbox
+ * @mport: Master port implementing the outbound message unit
+ * @dev_id: Device specific pointer to pass on event
+ * @mbox: Mailbox to open
+ * @entries: Number of entries in the outbound mailbox ring
+ *
+ * Initializes buffer ring, request the outbound message interrupt,
+ * and enables the outbound message unit. Returns %0 on success and
+ * %-EINVAL or %-ENOMEM on failure.
+ */
+int rio_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries)
+{
+ int i, j, rc = 0;
+ struct rio_priv *priv = mport->priv;
+
+ if ((entries < RIO_MIN_TX_RING_SIZE) ||
+ (entries > RIO_MAX_TX_RING_SIZE) || (!is_power_of_2(entries))) {
+ rc = -EINVAL;
+ goto out;
+ }
+
+ /* Initialize shadow copy ring */
+ priv->msg_tx_ring.dev_id = dev_id;
+ priv->msg_tx_ring.size = entries;
+
+ for (i = 0; i < priv->msg_tx_ring.size; i++) {
+ priv->msg_tx_ring.virt_buffer[i] =
+ dma_alloc_coherent(NULL, RIO_MSG_BUFFER_SIZE,
+ &priv->msg_tx_ring.phys_buffer[i],
+ GFP_KERNEL);
+ if (!priv->msg_tx_ring.virt_buffer[i]) {
+ rc = -ENOMEM;
+ for (j = 0; j < priv->msg_tx_ring.size; j++)
+ if (priv->msg_tx_ring.virt_buffer[j])
+ dma_free_coherent(NULL,
+ RIO_MSG_BUFFER_SIZE,
+ priv->msg_tx_ring.
+ virt_buffer[j],
+ priv->msg_tx_ring.
+ phys_buffer[j]);
+ goto out;
+ }
+ }
+
+ /* Initialize outbound message descriptor ring */
+ priv->msg_tx_ring.virt = dma_alloc_coherent(NULL,
+ priv->msg_tx_ring.size *
+ RIO_MSG_DESC_SIZE,
+ &priv->msg_tx_ring.phys,
+ GFP_KERNEL);
+ if (!priv->msg_tx_ring.virt) {
+ rc = -ENOMEM;
+ goto out_dma;
+ }
+ priv->msg_tx_ring.tx_slot = 0;
+
+ /* Point dequeue/enqueue pointers at first entry in ring */
+ out_be32(&priv->msg_regs->odqdpar, priv->msg_tx_ring.phys);
+ out_be32(&priv->msg_regs->odqepar, priv->msg_tx_ring.phys);
+
+ /* Configure for snooping */
+ out_be32(&priv->msg_regs->osar, 0x00000004);
+
+ /* Clear interrupt status */
+ out_be32(&priv->msg_regs->osr, 0x000000b3);
+
+ /* Hook up outbound message handler */
+ rc = request_irq(IRQ_RIO_TX(mport), fsl_rio_tx_handler, 0, "msg_tx",
+ mport);
+ if (rc < 0)
+ goto out_irq;
+
+ /*
+ * Configure outbound message unit
+ * Snooping
+ * Interrupts (all enabled, except QEIE)
+ * Chaining mode
+ * Disable
+ */
+ out_be32(&priv->msg_regs->omr, 0x00100220);
+
+ /* Set number of entries */
+ setbits32(&priv->msg_regs->omr,
+ ((get_bitmask_order(entries) - 2) << 12));
+
+ /* Now enable the unit */
+ setbits32(&priv->msg_regs->omr, 0x1);
+
+ out:
+ return rc;
+
+ out_irq:
+ dma_free_coherent(NULL, priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
+ priv->msg_tx_ring.virt, priv->msg_tx_ring.phys);
+
+ out_dma:
+ for (i = 0; i < priv->msg_tx_ring.size; i++)
+ dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE,
+ priv->msg_tx_ring.virt_buffer[i],
+ priv->msg_tx_ring.phys_buffer[i]);
+
+ return rc;
+}
+
+/**
+ * rio_close_outb_mbox - Shut down PowerPC outbound mailbox
+ * @mport: Master port implementing the outbound message unit
+ * @mbox: Mailbox to close
+ *
+ * Disables the outbound message unit, free all buffers, and
+ * frees the outbound message interrupt.
+ */
+void rio_close_outb_mbox(struct rio_mport *mport, int mbox)
+{
+ struct rio_priv *priv = mport->priv;
+ /* Disable inbound message unit */
+ out_be32(&priv->msg_regs->omr, 0);
+
+ /* Free ring */
+ dma_free_coherent(NULL, priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
+ priv->msg_tx_ring.virt, priv->msg_tx_ring.phys);
+
+ /* Free interrupt */
+ free_irq(IRQ_RIO_TX(mport), mport);
+}
+
+/**
+ * fsl_rio_rx_handler - PowerPC inbound message interrupt handler
+ * @irq: Linux interrupt number
+ * @dev_instance: Pointer to interrupt-specific data
+ *
+ * Handles inbound message interrupts. Executes a registered inbound
+ * mailbox event handler and acks the interrupt occurence.
+ */
+static irqreturn_t fsl_rio_rx_handler(int irq, void *dev_instance)
+{
+ int isr;
+ struct rio_mport *port = (struct rio_mport *)dev_instance;
+ struct rio_priv *priv = port->priv;
+
+ isr = in_be32(&priv->msg_regs->isr);
+
+ if (unlikely(isr & RIO_MSG_ISR_TE)) {
+ pr_info("RIO: inbound message reception error\n");
+ out_be32(&priv->msg_regs->isr, RIO_MSG_ISR_TE);
+ goto out;
+ }
+
+ /* XXX Need to check/dispatch until queue empty */
+ if (isr & RIO_MSG_ISR_DIQI) {
+ /*
+ * We implement *only* mailbox 0, but can receive messages
+ * for any mailbox/letter to that mailbox destination. So,
+ * make the callback with an unknown/invalid mailbox number
+ * argument.
+ */
+ port->inb_msg[0].mcback(port, priv->msg_rx_ring.dev_id, -1, -1);
+
+ /* Ack the queueing interrupt */
+ out_be32(&priv->msg_regs->isr, RIO_MSG_ISR_DIQI);
+ }
+
+ out:
+ return IRQ_HANDLED;
+}
+
+/**
+ * rio_open_inb_mbox - Initialize PowerPC inbound mailbox
+ * @mport: Master port implementing the inbound message unit
+ * @dev_id: Device specific pointer to pass on event
+ * @mbox: Mailbox to open
+ * @entries: Number of entries in the inbound mailbox ring
+ *
+ * Initializes buffer ring, request the inbound message interrupt,
+ * and enables the inbound message unit. Returns %0 on success
+ * and %-EINVAL or %-ENOMEM on failure.
+ */
+int rio_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries)
+{
+ int i, rc = 0;
+ struct rio_priv *priv = mport->priv;
+
+ if ((entries < RIO_MIN_RX_RING_SIZE) ||
+ (entries > RIO_MAX_RX_RING_SIZE) || (!is_power_of_2(entries))) {
+ rc = -EINVAL;
+ goto out;
+ }
+
+ /* Initialize client buffer ring */
+ priv->msg_rx_ring.dev_id = dev_id;
+ priv->msg_rx_ring.size = entries;
+ priv->msg_rx_ring.rx_slot = 0;
+ for (i = 0; i < priv->msg_rx_ring.size; i++)
+ priv->msg_rx_ring.virt_buffer[i] = NULL;
+
+ /* Initialize inbound message ring */
+ priv->msg_rx_ring.virt = dma_alloc_coherent(NULL,
+ priv->msg_rx_ring.size *
+ RIO_MAX_MSG_SIZE,
+ &priv->msg_rx_ring.phys,
+ GFP_KERNEL);
+ if (!priv->msg_rx_ring.virt) {
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ /* Point dequeue/enqueue pointers at first entry in ring */
+ out_be32(&priv->msg_regs->ifqdpar, (u32) priv->msg_rx_ring.phys);
+ out_be32(&priv->msg_regs->ifqepar, (u32) priv->msg_rx_ring.phys);
+
+ /* Clear interrupt status */
+ out_be32(&priv->msg_regs->isr, 0x00000091);
+
+ /* Hook up inbound message handler */
+ rc = request_irq(IRQ_RIO_RX(mport), fsl_rio_rx_handler, 0,
+ "msg_rx", mport);
+ if (rc < 0) {
+ dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE,
+ priv->msg_tx_ring.virt_buffer[i],
+ priv->msg_tx_ring.phys_buffer[i]);
+ goto out;
+ }
+
+ /*
+ * Configure inbound message unit:
+ * Snooping
+ * 4KB max message size
+ * Unmask all interrupt sources
+ * Disable
+ */
+ out_be32(&priv->msg_regs->imr, 0x001b0060);
+
+ /* Set number of queue entries */
+ setbits32(&priv->msg_regs->imr,
+ ((get_bitmask_order(entries) - 2) << 12));
+
+ /* Now enable the unit */
+ setbits32(&priv->msg_regs->imr, 0x1);
+
+ out:
+ return rc;
+}
+
+/**
+ * rio_close_inb_mbox - Shut down PowerPC inbound mailbox
+ * @mport: Master port implementing the inbound message unit
+ * @mbox: Mailbox to close
+ *
+ * Disables the inbound message unit, free all buffers, and
+ * frees the inbound message interrupt.
+ */
+void rio_close_inb_mbox(struct rio_mport *mport, int mbox)
+{
+ struct rio_priv *priv = mport->priv;
+ /* Disable inbound message unit */
+ out_be32(&priv->msg_regs->imr, 0);
+
+ /* Free ring */
+ dma_free_coherent(NULL, priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE,
+ priv->msg_rx_ring.virt, priv->msg_rx_ring.phys);
+
+ /* Free interrupt */
+ free_irq(IRQ_RIO_RX(mport), mport);
+}
+
+/**
+ * rio_hw_add_inb_buffer - Add buffer to the PowerPC inbound message queue
+ * @mport: Master port implementing the inbound message unit
+ * @mbox: Inbound mailbox number
+ * @buf: Buffer to add to inbound queue
+ *
+ * Adds the @buf buffer to the PowerPC inbound message queue. Returns
+ * %0 on success or %-EINVAL on failure.
+ */
+int rio_hw_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf)
+{
+ int rc = 0;
+ struct rio_priv *priv = mport->priv;
+
+ pr_debug("RIO: rio_hw_add_inb_buffer(), msg_rx_ring.rx_slot %d\n",
+ priv->msg_rx_ring.rx_slot);
+
+ if (unlikely(priv->msg_rx_ring.virt_buffer[priv->msg_rx_ring.rx_slot])) {
+ ERR("error adding inbound buffer %d, buffer exists\n",
+ priv->msg_rx_ring.rx_slot);
+ rc = -EINVAL;
+ goto out;
+ }
+
+ priv->msg_rx_ring.virt_buffer[priv->msg_rx_ring.rx_slot] = buf;
+ if (++priv->msg_rx_ring.rx_slot == priv->msg_rx_ring.size)
+ priv->msg_rx_ring.rx_slot = 0;
+
+ out:
+ return rc;
+}
+
+EXPORT_SYMBOL_GPL(rio_hw_add_inb_buffer);
+
+/**
+ * rio_hw_get_inb_message - Fetch inbound message from the PowerPC message unit
+ * @mport: Master port implementing the inbound message unit
+ * @mbox: Inbound mailbox number
+ *
+ * Gets the next available inbound message from the inbound message queue.
+ * A pointer to the message is returned on success or NULL on failure.
+ */
+void *rio_hw_get_inb_message(struct rio_mport *mport, int mbox)
+{
+ u32 phys_buf;
+ void *virt_buf = NULL;
+ void *buf = NULL;
+ int buf_idx;
+ struct rio_priv *priv = mport->priv;
+
+ phys_buf = in_be32(&priv->msg_regs->ifqdpar);
+
+ /* If no more messages, then bail out */
+ if (phys_buf == in_be32(&priv->msg_regs->ifqepar))
+ goto out2;
+
+ virt_buf = priv->msg_rx_ring.virt + (phys_buf - priv->msg_rx_ring.phys);
+ buf_idx = (phys_buf - priv->msg_rx_ring.phys) / RIO_MAX_MSG_SIZE;
+ buf = priv->msg_rx_ring.virt_buffer[buf_idx];
+
+ if (unlikely(!buf)) {
+ ERR("inbound message copy failed, no buffers\n");
+ goto out1;
+ }
+
+ /* Copy max message size, caller is expected to allocate that big */
+ memcpy(buf, virt_buf, RIO_MAX_MSG_SIZE);
+
+ /* Clear the available buffer */
+ priv->msg_rx_ring.virt_buffer[buf_idx] = NULL;
+
+ out1:
+ setbits32(&priv->msg_regs->imr, RIO_MSG_IMR_MI);
+
+ out2:
+ return buf;
+}
+
+EXPORT_SYMBOL_GPL(rio_hw_get_inb_message);
+
+/**
+ * fsl_rio_dbell_handler - PowerPC doorbell interrupt handler
+ * @irq: Linux interrupt number
+ * @dev_instance: Pointer to interrupt-specific data
+ *
+ * Handles doorbell interrupts. Parses a list of registered
+ * doorbell event handlers and executes a matching event handler.
+ */
+static irqreturn_t fsl_rio_dbell_handler(int irq, void *dev_instance)
+{
+ int dsr;
+ struct rio_mport *port = (struct rio_mport *)dev_instance;
+ struct rio_priv *priv = port->priv;
+
+ dsr = in_be32(&priv->msg_regs->dsr);
+
+ if (dsr & DOORBELL_DSR_TE) {
+ pr_info("RIO: doorbell reception error\n");
+ out_be32(&priv->msg_regs->dsr, DOORBELL_DSR_TE);
+ goto out;
+ }
+
+ if (dsr & DOORBELL_DSR_QFI) {
+ pr_info("RIO: doorbell queue full\n");
+ out_be32(&priv->msg_regs->dsr, DOORBELL_DSR_QFI);
+ goto out;
+ }
+
+ /* XXX Need to check/dispatch until queue empty */
+ if (dsr & DOORBELL_DSR_DIQI) {
+ u32 dmsg =
+ (u32) priv->dbell_ring.virt +
+ (in_be32(&priv->msg_regs->dqdpar) & 0xfff);
+ struct rio_dbell *dbell;
+ int found = 0;
+
+ pr_debug("RIO: processing doorbell, sid 0x%02x tid 0x%02x "
+ "info 0x%04x\n", DBELL_SID(dmsg),
+ DBELL_TID(dmsg), DBELL_INF(dmsg));
+
+ list_for_each_entry(dbell, &port->dbells, node) {
+ if ((dbell->res->start <= DBELL_INF(dmsg)) &&
+ (dbell->res->end >= DBELL_INF(dmsg))) {
+ found = 1;
+ break;
+ }
+ }
+ if (found) {
+ dbell->dinb(port, dbell->dev_id, DBELL_SID(dmsg), DBELL_TID(dmsg),
+ DBELL_INF(dmsg));
+ } else {
+ pr_debug("RIO: spurious doorbell, sid 0x%02x "
+ "tid 0x%02x info %4.4x\n",
+ DBELL_SID(dmsg), DBELL_TID(dmsg),
+ DBELL_INF(dmsg));
+ }
+ setbits32(&priv->msg_regs->dmr, DOORBELL_DMR_DI);
+ out_be32(&priv->msg_regs->dsr, DOORBELL_DSR_DIQI);
+ }
+
+ out:
+ return IRQ_HANDLED;
+}
+
+/**
+ * fsl_rio_doorbell_init - PowerPC doorbell interface init
+ * @mport: Master port implementing the inbound doorbell unit
+ *
+ * Initializes doorbell unit hardware and inbound DMA buffer
+ * ring. Called from fsl_rio_setup(). Returns %0 on success
+ * or %-ENOMEM on failure.
+ */
+static int fsl_rio_doorbell_init(struct rio_mport *mport, phys_addr_t dbaddr)
+{
+ int rc = 0;
+ struct rio_priv *priv = mport->priv;
+
+ /* Map outbound doorbell window immediately after maintenance window */
+ priv->dbell_win = ioremap(dbaddr, RIO_DBELL_WIN_SIZE);
+ if (!priv->dbell_win) {
+ ERR("unable to map outbound doorbell window\n");
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ /* Initialize inbound doorbells */
+ priv->dbell_ring.virt = dma_alloc_coherent(NULL,
+ 512 * DOORBELL_MESSAGE_SIZE,
+ &priv->dbell_ring.phys,
+ GFP_KERNEL);
+ if (!priv->dbell_ring.virt) {
+ ERR("unable allocate inbound doorbell ring\n");
+ rc = -ENOMEM;
+ iounmap(priv->dbell_win);
+ goto out;
+ }
+
+ /* Point dequeue/enqueue pointers at first entry in ring */
+ out_be32(&priv->msg_regs->dqdpar, (u32) priv->dbell_ring.phys);
+ out_be32(&priv->msg_regs->dqepar, (u32) priv->dbell_ring.phys);
+
+ /* Clear interrupt status */
+ out_be32(&priv->msg_regs->dsr, 0x00000091);
+
+ /* Hook up doorbell handler */
+ rc = request_irq(IRQ_RIO_BELL(mport), fsl_rio_dbell_handler, 0,
+ "dbell_rx", mport);
+ if (rc < 0) {
+ iounmap(priv->dbell_win);
+ dma_free_coherent(NULL, 512 * DOORBELL_MESSAGE_SIZE,
+ priv->dbell_ring.virt, priv->dbell_ring.phys);
+ ERR("unable to request inbound doorbell irq");
+ goto out;
+ }
+
+ /* Configure doorbells for snooping, 512 entries, and enable */
+ out_be32(&priv->msg_regs->dmr, 0x00108161);
+
+ out:
+ return rc;
+}
+
+u32 rio_get_mport_id(struct rio_mport *mport)
+{
+ u32 mport_id = 0;
+
+ rio_local_read_config_32(mport, 0x60, &mport_id);
+ mport_id = mport->sys_size ? (mport_id & 0xffff) : ((mport_id >> 16) & 0xff);
+ return mport_id;
+
+}
+
+static char *cmdline = NULL;
+
+static int fsl_rio_get_hdid(int index)
+{
+ /* XXX Need to parse multiple entries in some format */
+ if (!cmdline)
+ return -1;
+
+ return simple_strtol(cmdline, NULL, 0);
+}
+
+static int fsl_rio_get_cmdline(char *s)
+{
+ if (!s)
+ return 0;
+
+ cmdline = s;
+ return 1;
+}
+
+__setup("riohdid=", fsl_rio_get_cmdline);
+
+static struct rio_mem_ops fsl_mem_ops = {
+ .map_inb = fsl_rio_map_inb_mem,
+ .map_outb = fsl_rio_map_outb_mem,
+ .unmap_inb = fsl_rio_unmap_inb_mem,
+ .unmap_outb = fsl_rio_unmap_outb_mem,
+};
+
+static inline void fsl_rio_info(u32 ccsr)
+{
+ if (ccsr & 1) {
+ /* Serial phy */
+ INFO("Hardware port width: ");
+ switch (ccsr >> 30) {
+ case 0:
+ printk("1\n");
+ break;
+ case 1:
+ printk("4\n");
+ break;
+ default:
+ printk("Unknown\n");
+ break;;
+ }
+
+ INFO("Training connection status: ");
+ switch ((ccsr >> 27) & 7) {
+ case 0:
+ printk("Single-lane 0\n");
+ break;
+ case 1:
+ printk("Single-lane 2\n");
+ break;
+ case 2:
+ printk("Four-lane 2\n");
+ break;
+ default:
+ printk("Unknown\n");
+ }
+ } else {
+ /* Parallel phy */
+ if (ccsr & 0x80000000)
+ INFO("Output port operating in 8-bit mode\n");
+ if (ccsr & 0x08000000)
+ INFO("Input port operating in 8-bit mode\n");
+ }
+
+}
+
+static inline u8 hw_port_width(u32 ccsr)
+{
+ u8 pw = ccsr >> 30;
+ switch (pw) {
+ case 0:
+ return 1;
+ case 1:
+ return 4;
+ default:
+ return 0;
+ }
+}
+
+static int of_cells_get(struct device_node *np, const char *str)
+{
+ struct device_node *tmp = NULL;
+ const int *var = NULL;
+
+ var = of_get_property(np, str, NULL);
+ tmp = of_get_parent(np);
+
+ while (!var && tmp) {
+ var = (int *)of_get_property(tmp, str, NULL);
+ of_node_put(tmp);
+ tmp = of_get_parent(np);
+ }
+
+ return (var ? *var : 0);
+}
+
+/**
+ * fsl_rio_setup - Setup PowerPC RapidIO interface
+ *
+ * Initializes PowerPC RapidIO hardware interface, configures
+ * master port with system-specific info, and registers the
+ * master port with the RapidIO subsystem.
+ */
+int fsl_rio_setup(struct of_device *dev)
+{
+ struct rio_ops *ops = NULL;
+ struct rio_mport *port = NULL;
+ const u32 *dt_range;
+ int rlen = 0;
+ resource_size_t law_start = 0, law_size = 0;
+ struct resource regs;
+ int rc;
+ enum rio_phy_type phy_type;
+ void __iomem *regs_win = NULL;
+ struct rio_priv *priv = NULL;
+ u32 ccsr;
+ int paw, aw, psw;
+ struct device_node *pa;
+
+ if (!dev->node) {
+ ERR("Dev ofnode is NULL\n");
+ return -EFAULT;
+ }
+
+ dt_range = of_get_property(dev->node, "ranges", &rlen);
+ if (!dt_range) {
+ ERR("Can't get %s property 'ranges'\n", dev->node->full_name);
+ return -EFAULT;
+ }
+
+ aw = of_cells_get(dev->node, "#address-cells");
+ pa = of_get_parent(dev->node);
+ paw = of_cells_get(pa, "#address-cells");
+ psw = of_cells_get(pa, "#size-cells");
+ of_node_put(pa);
+
+ law_start = of_read_number(dt_range + aw, paw);
+ law_size = of_read_number(dt_range + aw + paw, psw);
+
+ rc = of_address_to_resource(dev->node, 0, &regs);
+ if (rc) {
+ ERR("Can't get %s property 'reg'\n", dev->node->full_name);
+ return -EFAULT;
+ }
+ INFO("Of-device full name %s\n", dev->node->full_name);
+ INFO("LAW start 0x%016llx, size 0x%016llx.\n", (u64)law_start,
+ (u64)law_size);
+ INFO("Regs start 0x%08x size 0x%08x\n", regs.start,
+ regs.end - regs.start + 1);
+
+ regs_win = ioremap(regs.start, regs.end - regs.start + 1);
+ if (!regs_win) {
+ ERR("Can't remap io for 'regs_win'\n");
+ rc = -ENOMEM;
+ goto err;
+ }
+
+ /* Probe the RapidIO phy type */
+ ccsr = in_be32(regs_win + RIO_CCSR);
+ if (ccsr & 1)
+ phy_type = RIO_PHY_SERIAL;
+ else
+ phy_type = RIO_PHY_PARALLEL;
+ INFO("Phy type: ");
+ switch (phy_type) {
+ case RIO_PHY_SERIAL:
+ printk("serial\n");
+ break;
+ case RIO_PHY_PARALLEL:
+ printk("parallel");
+ break;
+ default:
+ printk("Unknown type %d\n", phy_type);
+ rc = -EINVAL;
+ goto err;
+ };
+ fsl_rio_info(ccsr);
+
+
+ /* Checking the port training status */
+ if (in_be32((regs_win + RIO_ESCSR)) & 1) {
+ ERR("Port is not ready. Try to restart connection...\n");
+ switch (phy_type) {
+ case RIO_PHY_SERIAL:
+ /* Disable ports */
+ out_be32(regs_win + RIO_CCSR, 0);
+ /* Set 1x lane */
+ setbits32(regs_win + RIO_CCSR, 0x02000000);
+ /* Enable ports */
+ setbits32(regs_win + RIO_CCSR, 0x00600000);
+ break;
+ case RIO_PHY_PARALLEL:
+ /* Disable ports */
+ out_be32(regs_win + RIO_CCSR, 0x22000000);
+ /* Enable ports */
+ out_be32(regs_win + RIO_CCSR, 0x44000000);
+ break;
+ }
+ if (in_be32((regs_win + RIO_ESCSR)) & 1) {
+ ERR("Port restart failed.\n");
+ rc = -ENOLINK;
+ goto err;
+ }
+ INFO("Port restart success!");
+ ccsr = in_be32(regs_win + RIO_CCSR);
+ fsl_rio_info(ccsr);
+ }
+
+ ops = kzalloc(sizeof(struct rio_ops), GFP_KERNEL);
+ ops->lcread = fsl_local_config_read;
+ ops->lcwrite = fsl_local_config_write;
+ ops->cread = fsl_rio_config_read;
+ ops->cwrite = fsl_rio_config_write;
+ ops->dsend = fsl_rio_doorbell_send;
+
+ port = kzalloc(sizeof(struct rio_mport), GFP_KERNEL);
+ if (!port) {
+ ERR("Can't alloc memory for 'port'\n");
+ rc = -ENOMEM;
+ goto err;
+ }
+ port->id = 0;
+ port->index = 0;
+
+ port->sys_size = (in_be32((regs_win + RIO_PEF_CAR))
+ & RIO_PEF_CTLS) >> 4;
+ INFO("RapidIO Common Transport System size: %d\n",
+ port->sys_size ? 65536 : 256);
+
+ port->phy_type = phy_type;
+
+ priv = kzalloc(sizeof(struct rio_priv), GFP_KERNEL);
+ if (!priv) {
+ ERR("Can't alloc memory for 'priv'\n");
+ rc = -ENOMEM;
+ goto err;
+ }
+ port->priv = priv;
+ priv->regs_win = regs_win;
+ INIT_LIST_HEAD(&port->dbells);
+ port->iores.start = law_start;
+ port->iores.end = law_start + law_size;
+ port->iores.flags = IORESOURCE_MEM;
+ port->iores.name = "rio_io_win";
+
+ priv->bellirq = irq_of_parse_and_map(dev->node, 2);
+ priv->txirq = irq_of_parse_and_map(dev->node, 3);
+ priv->rxirq = irq_of_parse_and_map(dev->node, 4);
+ INFO("bellirq: %d, txirq: %d, rxirq %d\n", priv->bellirq,
+ priv->txirq, priv->rxirq);
+
+ rio_init_dbell_res(&port->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff);
+ rio_init_mbox_res(&port->riores[RIO_INB_MBOX_RESOURCE], 0, 0);
+ rio_init_mbox_res(&port->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0);
+
+ strcpy(port->name, "RIO0 mport");
+
+ port->ops = ops;
+ port->mops = &fsl_mem_ops;
+ port->host_deviceid = fsl_rio_get_hdid(port->id);
+
+ rio_register_mport(port);
+
+ priv->atmu_regs = (struct rio_atmu_regs *)(regs_win +
+ RIO_ATMU_REGS_OFFSET);
+ priv->maint_atmu_regs = priv->atmu_regs + 1;
+ priv->dbell_atmu_regs = priv->atmu_regs + 2;
+ priv->msg_regs = (struct rio_msg_regs *)(regs_win +
+ ((port->phy_type == RIO_PHY_SERIAL)
+ ? RIO_S_MSG_REGS_OFFSET
+ : RIO_P_MSG_REGS_OFFSET));
+
+ /* Set to receive any dist ID for serial RapidIO controller. */
+ if (port->phy_type == RIO_PHY_SERIAL)
+ out_be32((regs_win + RIO_ISR_AACR), RIO_ISR_AACR_AA);
+
+ /* Configure maintenance transaction window */
+ if (!rio_request_io_region(port, NULL, law_start, RIO_MAINT_WIN_SIZE,
+ "maint_win", RIO_RESOURCE_MAINT, NULL)) {
+ rc = -EPERM;
+ ERR("request maint win error!\n");
+ goto err;
+ }
+ out_be32(&priv->maint_atmu_regs->rowbar,
+ (law_start >> 12) & 0xffffff);
+ out_be32(&priv->maint_atmu_regs->rowar, 0x80077000
+ | (__ilog2(RIO_MAINT_WIN_SIZE) - 1));
+
+ priv->maint_win = ioremap(law_start, RIO_MAINT_WIN_SIZE);
+
+ /* Configure outbound doorbell window */
+ if (!rio_request_io_region(port, NULL, law_start + RIO_MAINT_WIN_SIZE,
+ RIO_DBELL_WIN_SIZE,
+ "dbell_win", RIO_RESOURCE_DOORBELL, NULL)) {
+ rc = -EPERM;
+ ERR("request doorbell win error!\n");
+ goto err;
+ }
+ out_be32(&priv->dbell_atmu_regs->rowbar, ((law_start +
+ RIO_MAINT_WIN_SIZE) >> 12) & 0xfffff);
+ out_be32(&priv->dbell_atmu_regs->rowar, 0x80042000
+ | (__ilog2(RIO_DBELL_WIN_SIZE) - 1));
+ rc = fsl_rio_doorbell_init(port, law_start + RIO_MAINT_WIN_SIZE);
+ if (rc)
+ goto err;
+
+ return 0;
+
+err:
+ if (regs_win)
+ iounmap(regs_win);
+ if (ops)
+ kfree(ops);
+ if (port)
+ kfree(port);
+ if (priv)
+ kfree(priv);
+ return rc;
+}
diff --git a/arch/powerpc/sysdev/fsl_rio.h b/arch/powerpc/sysdev/fsl_rio.h
new file mode 100644
index 0000000..cb3f36a
--- /dev/null
+++ b/arch/powerpc/sysdev/fsl_rio.h
@@ -0,0 +1,20 @@
+/*
+ * Freescale PowerPC RapidIO definitions
+ *
+ * Copyright (C) 2007 Freescale Simconductor, Inc. All rights reserved.
+ * Zhang Wei <wei.zhang@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __POWERPC_SYSDEV_FSL_RIO_H
+#define __POWERPC_SYSDEV_FSL_RIO_H
+
+#include <linux/init.h>
+
+extern int fsl_rio_setup(struct of_device *of_dev);
+
+#endif /* __POWERPC_SYSDEV_FSL_RIO_H */
--
1.5.1
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-06-12 11:01    [from the cache]
©2003-2011 Jasper Spaans