lkml.org 
[lkml]   [2007]   [Jun]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: IRQ handler type mismatch for IRQ 7
On 6/11/07, Ingo Molnar <mingo@elte.hu> wrote:
> so both parport and serial is on the same IRQ: #7, but the parport one
> does not support shared interrupt lines (IRQF_SHARED). You can probably
> change the mapping in the BIOS (change the serial one to say IRQ#3 or
> IRQ#4). I suspect you dont have any real parallel port hardware
> attached? (and probably no serial port hardware either?) So you can
> safely ignore this.

Correct, there is neither serial nor parport hardware here. Thanks for
your help!

Vegard
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-06-11 15:23    [W:0.038 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site